Usage Instructions for Ragout ============================= Quick Usage ----------- usage: ragout.py [-h] [-o output_dir] [-s {sibelia,hal}] [--no-refine] [--overwrite] [--repeats] [--debug] [-t THREADS] [--version] recipe_file positional arguments: recipe_file path to recipe file optional arguments: -h, --help show this help message and exit -o output_dir, --outdir output_dir path to the working directory (default: ragout-out) -s {sibelia,hal}, --synteny {sibelia,hal} backend for synteny block decomposition (default: sibelia) --no-refine disable refinement with assembly graph (default: False) --overwrite overwrite results from the previous run (default: False) --repeats resolve repetitive input sequences (default: False) --debug enable debug output (default: False) -t THREADS, --threads THREADS number of threads for synteny backend (default: 1) --version show program's version number and exit Examples -------- You can try Ragout on the provided ready-to-use examples: python ragout.py examples/E.Coli/ecoli.rcp --outdir examples/E.Coli/out/ python ragout.py examples/H.Pylori/helicobacter.rcp --outdir examples/H.Pylori/out/ python ragout.py examples/S.Aureus/aureus.rcp --outdir examples/S.Aureus/out/ python ragout.py examples/V.Cholerae/cholerae.rcp --outdir examples/V.Cholerae/out/ Initial Assembly Requirements ----------------------------- Ragout takes initial assembly fragments (contigs/scaffolds) as input. We performed our tests with SPAdes, ABySS and SOAPdenovo assemblers, others should work fine too, if their output satisfy the following conditions: * Assembly coverage should be sufficient (80-90%+) * *All* contigs/scaffolds output by assembler should be used (including short ones) * For the better performance of the refinment module, contigs/scaffolds that were connected in a graph used by assembler should overlap on a constant value (usually k-mer or (k-1)-mer). This works for the most of assemblers which utilize de Bruijn graphs. Currently, for other types of assemblers (such as SGA) the performance of the refinement procedure is limited. Algorithm Overview ------------------- Ragout works with genomes represented as sequences of synteny blocks and firstly uses *Sibelia* or *HAL alignment* for this decomposition. This step is usually the most time-consuming. Next, Ragout constructs a breakpoint graph (which encodes the order of synteny blocks in the input genomes) and predicts missing adjacencies between synteny blocks in the target genome (as it is fragmented into contigs/scaffolds, some adjacencies are missing). Then, assembly fragments are being joined into scaffolds with respect to the inferred adjacencies. This procedure is repeated multiple times with the different scale of the synteny blocks decomposition. Afterwards, a refinement step is performed. Ragout reconstructs assembly (overlap) graph by overlapping input assembly fragments. This graph is used to insert very short/repetitive fragments into the final scaffolds. Input ----- Ragout takes as input: * Reference genomes [in *FASTA* format or packed into *HAL*] * Target assembly in [in *FASTA* format or packed into *HAL*] Optionally, you can add: * Phylogenetic tree containing reference and target genomes [in *NEWICK* format] * Synteny block scale All these parameters should be described in a single recipe file. See the example of such file below. Output ------ After running Ragout, output directory will contain (substitute target with the name of your target genome): * __target_scaffolds.fasta__: scaffolds sequences * __target_unplaced.fasta__: unplaced input fragments * __target_scaffolds.links__: description of the input fragments order (see below) * __target_scaffolds.agp__: a similar description in NCBI AGP format There will also be some intermediate files related to the run. Recipe File ----------- Recipe file describes Ragout run configuration. Here is an example of such file (a full version, some parameters could be ommited): .references = rf122,col,jkd,n315 .target = usa col.fasta = references/COL.fasta jkd.fasta = references/JKD6008.fasta rf122.fasta = references/RF122.fasta n315.fasta = references/N315.fasta usa.fasta = usa300_contigs.fasta .tree = (rf122:0.02,(((usa:0.01,col:0.01):0.01,jkd:0.04):0.005,n315:0.01):0.01); .blocks = small .naming_ref = rf122 or, if using *HAL* as input, tree, blocks scale and naming reference are inferred automatically .references = miranda,simulans,melanogaster .target = yakuba .hal = genomes/alignment.hal ###Parameters description: Each parameter could be "global" (related to the run) or "local" (for a particular genome). Global parameters start from dot: .global_param_name = value To set local parameter, use: genome_name.param_name = value ###Global parameters * __references__: comma-separated list of reference names [*required*] * __target__: target genome name [*required*] * __tree__: phylogenetic tree in NEWICK format * __blocks__: synteny blocks scale * __hal__: path to the alignment in *HAL* format * __naming_ref__: referece to use for output sequences naming ###Local parameters * __fasta__: path to *FASTA* [default = not set] * __draft__: indicates that reference is in a draft form (contigs/scaffolds) [default = false] ###Default values You can change default values for local parameters by assigning the parameter value to the special "star" object. For instance, if all input references except one are in draft form, you can write: *.draft = true complete_ref.draft = false ###Quick comments Paths to *FASTA*/*HAL* can be both relative and absolute. If you use *Sibelia* for synteny blocks decomposition you must specify FASTA for each input genome. If you use *HAL*, everything is taken from it. Running with Sibelia requires all sequence headers (">gi...") among ALL *FASTA* files to be unique. If you do not specify phylogenetic tree or synteny block scale, they are inferred automatically. Parameters Description ---------------------- ### Phylogenetic tree Ragout algorithm requires a phylogenetic tree as input. This tree could be inferred automatically from the breakpoint configuration of the input genomes. The automatic inference generally produces a good approximation of a real phylogeny and is therefore recommended for most of the purposes. However, if you already have the tree structure from a different source, you may guide the algorithm with it by setting the corresponding parameter. ### Synteny block scale Because the decomposition procedure is parameter-dependent, the assembly is performed in multiple iterations with different synteny block scale. Intuitively, the algorithm firstly considers only fragments that are long enough and then insert shorter ones into final scaffolds. There are two pre-defined scales: "small" and "large". We recommend "small" for relatively small genomes (bacterial) and large otherwise (mammalian). If the parameter is not set, it is automatically inferred based on input genomes size (recommended). ### Reference genome in draft form Ragout can use even an incomplete assembly (contigs/scaffolds) as reference sequences. If one of the reference is incomplete you should specify by setting the corresponding parameter in the recipe file. ### Naming reference Output scaffolds will be named according to the homology to one single reference (naming reference). This reference could be set with a corresponding recipe parameter, otherwise it would be chosen as the closest reference in the phylogenetic tree. The naming pattern is as follows. If a scaffold is homologous to a single reference chromosome "A", it would be named as "chr_A". If there are multuple homologous chromosomes, for example "A" and "B" in case of chromosomal fusion, it would be named "chr_A_B". If there would be multiple scaffodlds with a same name, the largest one would be chosen as "primary", others will get an extra "_unlocalized" suffix. Synteny backends ---------------- Ragout have two different options for synteny block decomposition: * Decomposition with *Sibelia* * Use of whole genome alignment (in *HAL* format) You can choose between backends by specifying --synteny (-s) option. If you use *Sibelia*, you should specify separate *FASTA* file for each input genome, while if you work with *HAL*, it is not necessary. ### Sibelia "Sibelia" is the default option and recommended for bacterial genomes. ### Whole genome alignment in *HAL* format Alternatively, Ragout can use *HAL* whole genome alignment for synteny blocks decomposition. This option is recommended for large (over 100MB) genomes, which *Sibelia* can not process. This alignment could be done by Progressive Cactus aligner [https://github.com/glennhickey/progressiveCactus]. The pipeline is as follows: first, align references and target genomes using Progressive Cactus (you will need phylogenetic tree) and then run Ragout on the resulted *HAL* file. This would require *HAL Tools* package to be installed in your system. ### Progressive Cactus and MAF backends are deprecated The support of MAF synteny backend is deprecated, because it is more convenient to work directly with *HAL*, which is a default output of Progressive Cactus. Progressive Cactus backend (not to be confused with HAL backend) is also deprecated, because typical run of the aligner includes some parallelization steps, which are hard to automate. Please let us know, if you have any issues with that changes. Repeat Resolution ----------------- As the main Ragout algorithm works only with unique synteny blocks, we filter all repetitive ones before building the breakpoint graph. Therefore, some target sequences (generally, short and repetitive contigs) will be ignored. (some portion of them will be put back during the refinement step of the algorithm) To incorporate these repetitive fragments into the assembly you can use the experimental algorithm, which tries to resolve the repetitive contigs and find their positions in the assmebly (--repeats option). Depending on nature of the input, you may get a significant increase in the assembly coverage, therefore decreasing scaffolds gaps. However, if there are copy number variations between reference and target genomes, the algorithm could make some false insertions. Refinement with Assembly Graph ------------------------------ Ragout uses assembly (overlap) graph to incorporate very short / repetitive contigs into the assembly. First, this graph is reconstructed by overlapping input contigs/scaffolds (see Sequence Data section for requirements). Then Ragout scaffolds which are already available are being "threaded" through this graph to find the true "genome path". This procedure: * Increases number of conitgs in output scaffolds * Improves estimates of distances between contigs Sometimes assembly graphs are not accurate: some adjacencies between contigs could be missing and on the other hand, there also might be some false-positive adjacencies. This may lead to some incorrectly inserted contigs. However, for good assemblies (with reasonable coverage, read length etc.) the fraction of such errors should be minor. As this step maight be computationaly expensive for big assemblies, you can skip it by specifying "--no-refine" option. Links File ---------- Ragout outputs information about generated adjacencies in "*.links" file. It is organized as a table for each scaffold and includes values described below: * __sequence__ : input fragment's name and strand (possibly with coordinates in form [start:end]) * __start__ : fragment's position in the scaffold * __length__ : fragment's length * __gap__ : gap size between the current and the next fragment * __support__ : names of the references that support corresponding adjacency Input fragments are described in form: [+/-]seq_name[start:end] Sign corresponds to a fragment's strand. If the [start:end] structure is ommited, the full fragment is used. A symbol "~>" in support field means the support of the assembly graph. Useful Scripts -------------- Scripts are located in "scripts" directory **verify-order.py:** Tests the correctness of the inferred contigs order if a "true" reference is available. First, contigs should be mapped on that reference using *nucmer* software: nucmer --maxmatch --coords reference contigs Then run the script with the obtained "coords" file: scripts/verify-order.py nucmer_coords ord_file