scsi_devinfo.h
#ifndef _SCSI_SCSI_DEVINFO_H
#define _SCSI_SCSI_DEVINFO_H
/*
* Flags for SCSI devices that need special treatment
*/
#define BLIST_NOLUN 0x001 /* Only scan LUN 0 */
#define BLIST_FORCELUN 0x002 /* Known to have LUNs, force scanning,
deprecated: Use max_luns=N */
#define BLIST_BORKEN 0x004 /* Flag for broken handshaking */
#define BLIST_KEY 0x008 /* unlock by special command */
#define BLIST_SINGLELUN 0x010 /* Do not use LUNs in parallel */
#define BLIST_NOTQ 0x020 /* Buggy Tagged Command Queuing */
#define BLIST_SPARSELUN 0x040 /* Non consecutive LUN numbering */
#define BLIST_MAX5LUN 0x080 /* Avoid LUNS >= 5 */
#define BLIST_ISROM 0x100 /* Treat as (removable) CD-ROM */
#define BLIST_LARGELUN 0x200 /* LUNs past 7 on a SCSI-2 device */
#define BLIST_INQUIRY_36 0x400 /* override additional length field */
#define BLIST_INQUIRY_58 0x800 /* ... for broken inquiry responses */
#define BLIST_NOSTARTONADD 0x1000 /* do not do automatic start on add */
#define BLIST_MS_SKIP_PAGE_08 0x2000 /* do not send ms page 0x08 */
#define BLIST_MS_SKIP_PAGE_3F 0x4000 /* do not send ms page 0x3f */
#define BLIST_USE_10_BYTE_MS 0x8000 /* use 10 byte ms before 6 byte ms */
#define BLIST_MS_192_BYTES_FOR_3F 0x10000 /* 192 byte ms page 0x3f request */
#define BLIST_REPORTLUN2 0x20000 /* try REPORT_LUNS even for SCSI-2 devs
(if HBA supports more than 8 LUNs) */
#define BLIST_NOREPORTLUN 0x40000 /* don't try REPORT_LUNS scan (SCSI-3 devs) */
#define BLIST_NOT_LOCKABLE 0x80000 /* don't use PREVENT-ALLOW commands */
#define BLIST_NO_ULD_ATTACH 0x100000 /* device is actually for RAID config */
#define BLIST_SELECT_NO_ATN 0x200000 /* select without ATN */
#define BLIST_RETRY_HWERROR 0x400000 /* retry HARDWARE_ERROR */
#endif