setup-emev2.c
/*
* Emma Mobile EV2 processor support
*
* Copyright (C) 2012 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/platform_device.h>
#include <linux/platform_data/gpio-em.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/input.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <mach/common.h>
#include <mach/emev2.h>
#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
static struct map_desc emev2_io_desc[] __initdata = {
#ifdef CONFIG_SMP
/* 2M mapping for SCU + L2 controller */
{
.virtual = 0xf0000000,
.pfn = __phys_to_pfn(0x1e000000),
.length = SZ_2M,
.type = MT_DEVICE
},
#endif
};
void __init emev2_map_io(void)
{
iotable_init(emev2_io_desc, ARRAY_SIZE(emev2_io_desc));
}
/* UART */
static struct resource uart0_resources[] = {
DEFINE_RES_MEM(0xe1020000, 0x38),
DEFINE_RES_IRQ(40),
};
static struct resource uart1_resources[] = {
DEFINE_RES_MEM(0xe1030000, 0x38),
DEFINE_RES_IRQ(41),
};
static struct resource uart2_resources[] = {
DEFINE_RES_MEM(0xe1040000, 0x38),
DEFINE_RES_IRQ(42),
};
static struct resource uart3_resources[] = {
DEFINE_RES_MEM(0xe1050000, 0x38),
DEFINE_RES_IRQ(43),
};
#define emev2_register_uart(idx) \
platform_device_register_simple("serial8250-em", idx, \
uart##idx##_resources, \
ARRAY_SIZE(uart##idx##_resources))
/* STI */
static struct resource sti_resources[] = {
DEFINE_RES_MEM(0xe0180000, 0x54),
DEFINE_RES_IRQ(157),
};
#define emev2_register_sti() \
platform_device_register_simple("em_sti", 0, \
sti_resources, \
ARRAY_SIZE(sti_resources))
/* GIO */
static struct gpio_em_config gio0_config = {
.gpio_base = 0,
.irq_base = EMEV2_GPIO_IRQ(0),
.number_of_pins = 32,
};
static struct resource gio0_resources[] = {
DEFINE_RES_MEM(0xe0050000, 0x2c),
DEFINE_RES_MEM(0xe0050040, 0x20),
DEFINE_RES_IRQ(99),
DEFINE_RES_IRQ(100),
};
static struct gpio_em_config gio1_config = {
.gpio_base = 32,
.irq_base = EMEV2_GPIO_IRQ(32),
.number_of_pins = 32,
};
static struct resource gio1_resources[] = {
DEFINE_RES_MEM(0xe0050080, 0x2c),
DEFINE_RES_MEM(0xe00500c0, 0x20),
DEFINE_RES_IRQ(101),
DEFINE_RES_IRQ(102),
};
static struct gpio_em_config gio2_config = {
.gpio_base = 64,
.irq_base = EMEV2_GPIO_IRQ(64),
.number_of_pins = 32,
};
static struct resource gio2_resources[] = {
DEFINE_RES_MEM(0xe0050100, 0x2c),
DEFINE_RES_MEM(0xe0050140, 0x20),
DEFINE_RES_IRQ(103),
DEFINE_RES_IRQ(104),
};
static struct gpio_em_config gio3_config = {
.gpio_base = 96,
.irq_base = EMEV2_GPIO_IRQ(96),
.number_of_pins = 32,
};
static struct resource gio3_resources[] = {
DEFINE_RES_MEM(0xe0050180, 0x2c),
DEFINE_RES_MEM(0xe00501c0, 0x20),
DEFINE_RES_IRQ(105),
DEFINE_RES_IRQ(106),
};
static struct gpio_em_config gio4_config = {
.gpio_base = 128,
.irq_base = EMEV2_GPIO_IRQ(128),
.number_of_pins = 31,
};
static struct resource gio4_resources[] = {
DEFINE_RES_MEM(0xe0050200, 0x2c),
DEFINE_RES_MEM(0xe0050240, 0x20),
DEFINE_RES_IRQ(107),
DEFINE_RES_IRQ(108),
};
#define emev2_register_gio(idx) \
platform_device_register_resndata(&platform_bus, "em_gio", \
idx, gio##idx##_resources, \
ARRAY_SIZE(gio##idx##_resources), \
&gio##idx##_config, \
sizeof(struct gpio_em_config))
static struct resource pmu_resources[] = {
DEFINE_RES_IRQ(152),
DEFINE_RES_IRQ(153),
};
#define emev2_register_pmu() \
platform_device_register_simple("arm-pmu", -1, \
pmu_resources, \
ARRAY_SIZE(pmu_resources))
void __init emev2_add_standard_devices(void)
{
if (!IS_ENABLED(CONFIG_COMMON_CLK))
emev2_clock_init();
emev2_register_uart(0);
emev2_register_uart(1);
emev2_register_uart(2);
emev2_register_uart(3);
emev2_register_sti();
emev2_register_gio(0);
emev2_register_gio(1);
emev2_register_gio(2);
emev2_register_gio(3);
emev2_register_gio(4);
emev2_register_pmu();
}
void __init emev2_init_delay(void)
{
shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */
}
#ifdef CONFIG_USE_OF
static const char *emev2_boards_compat_dt[] __initdata = {
"renesas,emev2",
NULL,
};
DT_MACHINE_START(EMEV2_DT, "Generic Emma Mobile EV2 (Flattened Device Tree)")
.smp = smp_ops(emev2_smp_ops),
.map_io = emev2_map_io,
.init_early = emev2_init_delay,
.dt_compat = emev2_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */