signal.c
/*
* Common signal handling code for both 32 and 64 bits
*
* Copyright (c) 2007 Benjamin Herrenschmidt, IBM Corporation
* Extracted from signal_32.c and signal_64.c
*
* This file is subject to the terms and conditions of the GNU General
* Public License. See the file README.legal in the main directory of
* this archive for more details.
*/
#include <linux/tracehook.h>
#include <linux/signal.h>
#include <linux/uprobes.h>
#include <linux/key.h>
#include <linux/context_tracking.h>
#include <linux/livepatch.h>
#include <asm/hw_breakpoint.h>
#include <linux/uaccess.h>
#include <asm/unistd.h>
#include <asm/debug.h>
#include <asm/tm.h>
#include "signal.h"
/* Log an error when sending an unhandled signal to a process. Controlled
* through debug.exception-trace sysctl.
*/
int show_unhandled_signals = 1;
/*
* Allocate space for the signal frame
*/
void __user *get_sigframe(struct ksignal *ksig, unsigned long sp,
size_t frame_size, int is_32)
{
unsigned long oldsp, newsp;
/* Default to using normal stack */
oldsp = get_clean_sp(sp, is_32);
oldsp = sigsp(oldsp, ksig);
newsp = (oldsp - frame_size) & ~0xFUL;
/* Check access */
if (!access_ok(VERIFY_WRITE, (void __user *)newsp, oldsp - newsp))
return NULL;
return (void __user *)newsp;
}
static void check_syscall_restart(struct pt_regs *regs, struct k_sigaction *ka,
int has_handler)
{
unsigned long ret = regs->gpr[3];
int restart = 1;
/* syscall ? */
if (TRAP(regs) != 0x0C00)
return;
/* error signalled ? */
if (!(regs->ccr & 0x10000000))
return;
switch (ret) {
case ERESTART_RESTARTBLOCK:
case ERESTARTNOHAND:
/* ERESTARTNOHAND means that the syscall should only be
* restarted if there was no handler for the signal, and since
* we only get here if there is a handler, we dont restart.
*/
restart = !has_handler;
break;
case ERESTARTSYS:
/* ERESTARTSYS means to restart the syscall if there is no
* handler or the handler was registered with SA_RESTART
*/
restart = !has_handler || (ka->sa.sa_flags & SA_RESTART) != 0;
break;
case ERESTARTNOINTR:
/* ERESTARTNOINTR means that the syscall should be
* called again after the signal handler returns.
*/
break;
default:
return;
}
if (restart) {
if (ret == ERESTART_RESTARTBLOCK)
regs->gpr[0] = __NR_restart_syscall;
else
regs->gpr[3] = regs->orig_gpr3;
regs->nip -= 4;
regs->result = 0;
} else {
regs->result = -EINTR;
regs->gpr[3] = EINTR;
regs->ccr |= 0x10000000;
}
}
static void do_signal(struct task_struct *tsk)
{
sigset_t *oldset = sigmask_to_save();
struct ksignal ksig = { .sig = 0 };
int ret;
int is32 = is_32bit_task();
BUG_ON(tsk != current);
get_signal(&ksig);
/* Is there any syscall restart business here ? */
check_syscall_restart(tsk->thread.regs, &ksig.ka, ksig.sig > 0);
if (ksig.sig <= 0) {
/* No signal to deliver -- put the saved sigmask back */
restore_saved_sigmask();
tsk->thread.regs->trap = 0;
return; /* no signals delivered */
}
#ifndef CONFIG_PPC_ADV_DEBUG_REGS
/*
* Reenable the DABR before delivering the signal to
* user space. The DABR will have been cleared if it
* triggered inside the kernel.
*/
if (tsk->thread.hw_brk.address && tsk->thread.hw_brk.type)
__set_breakpoint(&tsk->thread.hw_brk);
#endif
/* Re-enable the breakpoints for the signal stack */
thread_change_pc(tsk, tsk->thread.regs);
if (is32) {
if (ksig.ka.sa.sa_flags & SA_SIGINFO)
ret = handle_rt_signal32(&ksig, oldset, tsk);
else
ret = handle_signal32(&ksig, oldset, tsk);
} else {
ret = handle_rt_signal64(&ksig, oldset, tsk);
}
tsk->thread.regs->trap = 0;
signal_setup_done(ret, &ksig, test_thread_flag(TIF_SINGLESTEP));
}
void do_notify_resume(struct pt_regs *regs, unsigned long thread_info_flags)
{
user_exit();
if (thread_info_flags & _TIF_UPROBE)
uprobe_notify_resume(regs);
if (thread_info_flags & _TIF_SIGPENDING) {
BUG_ON(regs != current->thread.regs);
do_signal(current);
}
if (thread_info_flags & _TIF_NOTIFY_RESUME) {
clear_thread_flag(TIF_NOTIFY_RESUME);
tracehook_notify_resume(regs);
}
if (thread_info_flags & _TIF_PATCH_PENDING)
klp_update_patch_state(current);
user_enter();
}
unsigned long get_tm_stackpointer(struct task_struct *tsk)
{
/* When in an active transaction that takes a signal, we need to be
* careful with the stack. It's possible that the stack has moved back
* up after the tbegin. The obvious case here is when the tbegin is
* called inside a function that returns before a tend. In this case,
* the stack is part of the checkpointed transactional memory state.
* If we write over this non transactionally or in suspend, we are in
* trouble because if we get a tm abort, the program counter and stack
* pointer will be back at the tbegin but our in memory stack won't be
* valid anymore.
*
* To avoid this, when taking a signal in an active transaction, we
* need to use the stack pointer from the checkpointed state, rather
* than the speculated state. This ensures that the signal context
* (written tm suspended) will be written below the stack required for
* the rollback. The transaction is aborted because of the treclaim,
* so any memory written between the tbegin and the signal will be
* rolled back anyway.
*
* For signals taken in non-TM or suspended mode, we use the
* normal/non-checkpointed stack pointer.
*/
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
BUG_ON(tsk != current);
if (MSR_TM_ACTIVE(tsk->thread.regs->msr)) {
tm_reclaim_current(TM_CAUSE_SIGNAL);
if (MSR_TM_TRANSACTIONAL(tsk->thread.regs->msr))
return tsk->thread.ckpt_regs.gpr[1];
}
#endif
return tsk->thread.regs->gpr[1];
}