timer.c
// SPDX-License-Identifier: GPL-2.0
/*
* Kernel internal timers
*
* Copyright (C) 1991, 1992 Linus Torvalds
*
* 1997-01-28 Modified by Finn Arne Gangstad to make timers scale better.
*
* 1997-09-10 Updated NTP code according to technical memorandum Jan '96
* "A Kernel Model for Precision Timekeeping" by Dave Mills
* 1998-12-24 Fixed a xtime SMP race (we need the xtime_lock rw spinlock to
* serialize accesses to xtime/lost_ticks).
* Copyright (C) 1998 Andrea Arcangeli
* 1999-03-10 Improved NTP compatibility by Ulrich Windl
* 2002-05-31 Move sys_sysinfo here and make its locking sane, Robert Love
* 2000-10-05 Implemented scalable SMP per-CPU timer handling.
* Copyright (C) 2000, 2001, 2002 Ingo Molnar
* Designed by David S. Miller, Alexey Kuznetsov and Ingo Molnar
*/
#include <linux/kernel_stat.h>
#include <linux/export.h>
#include <linux/interrupt.h>
#include <linux/percpu.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/pid_namespace.h>
#include <linux/notifier.h>
#include <linux/thread_info.h>
#include <linux/time.h>
#include <linux/jiffies.h>
#include <linux/posix-timers.h>
#include <linux/cpu.h>
#include <linux/syscalls.h>
#include <linux/delay.h>
#include <linux/tick.h>
#include <linux/kallsyms.h>
#include <linux/irq_work.h>
#include <linux/sched/signal.h>
#include <linux/sched/sysctl.h>
#include <linux/sched/nohz.h>
#include <linux/sched/debug.h>
#include <linux/slab.h>
#include <linux/compat.h>
#include <linux/uaccess.h>
#include <asm/unistd.h>
#include <asm/div64.h>
#include <asm/timex.h>
#include <asm/io.h>
#include "tick-internal.h"
#define CREATE_TRACE_POINTS
#include <trace/events/timer.h>
__visible u64 jiffies_64 __cacheline_aligned_in_smp = INITIAL_JIFFIES;
EXPORT_SYMBOL(jiffies_64);
/*
* The timer wheel has LVL_DEPTH array levels. Each level provides an array of
* LVL_SIZE buckets. Each level is driven by its own clock and therefor each
* level has a different granularity.
*
* The level granularity is: LVL_CLK_DIV ^ lvl
* The level clock frequency is: HZ / (LVL_CLK_DIV ^ level)
*
* The array level of a newly armed timer depends on the relative expiry
* time. The farther the expiry time is away the higher the array level and
* therefor the granularity becomes.
*
* Contrary to the original timer wheel implementation, which aims for 'exact'
* expiry of the timers, this implementation removes the need for recascading
* the timers into the lower array levels. The previous 'classic' timer wheel
* implementation of the kernel already violated the 'exact' expiry by adding
* slack to the expiry time to provide batched expiration. The granularity
* levels provide implicit batching.
*
* This is an optimization of the original timer wheel implementation for the
* majority of the timer wheel use cases: timeouts. The vast majority of
* timeout timers (networking, disk I/O ...) are canceled before expiry. If
* the timeout expires it indicates that normal operation is disturbed, so it
* does not matter much whether the timeout comes with a slight delay.
*
* The only exception to this are networking timers with a small expiry
* time. They rely on the granularity. Those fit into the first wheel level,
* which has HZ granularity.
*
* We don't have cascading anymore. timers with a expiry time above the
* capacity of the last wheel level are force expired at the maximum timeout
* value of the last wheel level. From data sampling we know that the maximum
* value observed is 5 days (network connection tracking), so this should not
* be an issue.
*
* The currently chosen array constants values are a good compromise between
* array size and granularity.
*
* This results in the following granularity and range levels:
*
* HZ 1000 steps
* Level Offset Granularity Range
* 0 0 1 ms 0 ms - 63 ms
* 1 64 8 ms 64 ms - 511 ms
* 2 128 64 ms 512 ms - 4095 ms (512ms - ~4s)
* 3 192 512 ms 4096 ms - 32767 ms (~4s - ~32s)
* 4 256 4096 ms (~4s) 32768 ms - 262143 ms (~32s - ~4m)
* 5 320 32768 ms (~32s) 262144 ms - 2097151 ms (~4m - ~34m)
* 6 384 262144 ms (~4m) 2097152 ms - 16777215 ms (~34m - ~4h)
* 7 448 2097152 ms (~34m) 16777216 ms - 134217727 ms (~4h - ~1d)
* 8 512 16777216 ms (~4h) 134217728 ms - 1073741822 ms (~1d - ~12d)
*
* HZ 300
* Level Offset Granularity Range
* 0 0 3 ms 0 ms - 210 ms
* 1 64 26 ms 213 ms - 1703 ms (213ms - ~1s)
* 2 128 213 ms 1706 ms - 13650 ms (~1s - ~13s)
* 3 192 1706 ms (~1s) 13653 ms - 109223 ms (~13s - ~1m)
* 4 256 13653 ms (~13s) 109226 ms - 873810 ms (~1m - ~14m)
* 5 320 109226 ms (~1m) 873813 ms - 6990503 ms (~14m - ~1h)
* 6 384 873813 ms (~14m) 6990506 ms - 55924050 ms (~1h - ~15h)
* 7 448 6990506 ms (~1h) 55924053 ms - 447392423 ms (~15h - ~5d)
* 8 512 55924053 ms (~15h) 447392426 ms - 3579139406 ms (~5d - ~41d)
*
* HZ 250
* Level Offset Granularity Range
* 0 0 4 ms 0 ms - 255 ms
* 1 64 32 ms 256 ms - 2047 ms (256ms - ~2s)
* 2 128 256 ms 2048 ms - 16383 ms (~2s - ~16s)
* 3 192 2048 ms (~2s) 16384 ms - 131071 ms (~16s - ~2m)
* 4 256 16384 ms (~16s) 131072 ms - 1048575 ms (~2m - ~17m)
* 5 320 131072 ms (~2m) 1048576 ms - 8388607 ms (~17m - ~2h)
* 6 384 1048576 ms (~17m) 8388608 ms - 67108863 ms (~2h - ~18h)
* 7 448 8388608 ms (~2h) 67108864 ms - 536870911 ms (~18h - ~6d)
* 8 512 67108864 ms (~18h) 536870912 ms - 4294967288 ms (~6d - ~49d)
*
* HZ 100
* Level Offset Granularity Range
* 0 0 10 ms 0 ms - 630 ms
* 1 64 80 ms 640 ms - 5110 ms (640ms - ~5s)
* 2 128 640 ms 5120 ms - 40950 ms (~5s - ~40s)
* 3 192 5120 ms (~5s) 40960 ms - 327670 ms (~40s - ~5m)
* 4 256 40960 ms (~40s) 327680 ms - 2621430 ms (~5m - ~43m)
* 5 320 327680 ms (~5m) 2621440 ms - 20971510 ms (~43m - ~5h)
* 6 384 2621440 ms (~43m) 20971520 ms - 167772150 ms (~5h - ~1d)
* 7 448 20971520 ms (~5h) 167772160 ms - 1342177270 ms (~1d - ~15d)
*/
/* Clock divisor for the next level */
#define LVL_CLK_SHIFT 3
#define LVL_CLK_DIV (1UL << LVL_CLK_SHIFT)
#define LVL_CLK_MASK (LVL_CLK_DIV - 1)
#define LVL_SHIFT(n) ((n) * LVL_CLK_SHIFT)
#define LVL_GRAN(n) (1UL << LVL_SHIFT(n))
/*
* The time start value for each level to select the bucket at enqueue
* time.
*/
#define LVL_START(n) ((LVL_SIZE - 1) << (((n) - 1) * LVL_CLK_SHIFT))
/* Size of each clock level */
#define LVL_BITS 6
#define LVL_SIZE (1UL << LVL_BITS)
#define LVL_MASK (LVL_SIZE - 1)
#define LVL_OFFS(n) ((n) * LVL_SIZE)
/* Level depth */
#if HZ > 100
# define LVL_DEPTH 9
# else
# define LVL_DEPTH 8
#endif
/* The cutoff (max. capacity of the wheel) */
#define WHEEL_TIMEOUT_CUTOFF (LVL_START(LVL_DEPTH))
#define WHEEL_TIMEOUT_MAX (WHEEL_TIMEOUT_CUTOFF - LVL_GRAN(LVL_DEPTH - 1))
/*
* The resulting wheel size. If NOHZ is configured we allocate two
* wheels so we have a separate storage for the deferrable timers.
*/
#define WHEEL_SIZE (LVL_SIZE * LVL_DEPTH)
#ifdef CONFIG_NO_HZ_COMMON
# define NR_BASES 2
# define BASE_STD 0
# define BASE_DEF 1
#else
# define NR_BASES 1
# define BASE_STD 0
# define BASE_DEF 0
#endif
struct timer_base {
raw_spinlock_t lock;
struct timer_list *running_timer;
#ifdef CONFIG_PREEMPT_RT
spinlock_t expiry_lock;
atomic_t timer_waiters;
#endif
unsigned long clk;
unsigned long next_expiry;
unsigned int cpu;
bool is_idle;
bool must_forward_clk;
DECLARE_BITMAP(pending_map, WHEEL_SIZE);
struct hlist_head vectors[WHEEL_SIZE];
} ____cacheline_aligned;
static DEFINE_PER_CPU(struct timer_base, timer_bases[NR_BASES]);
#ifdef CONFIG_NO_HZ_COMMON
static DEFINE_STATIC_KEY_FALSE(timers_nohz_active);
static DEFINE_MUTEX(timer_keys_mutex);
static void timer_update_keys(struct work_struct *work);
static DECLARE_WORK(timer_update_work, timer_update_keys);
#ifdef CONFIG_SMP
unsigned int sysctl_timer_migration = 1;
DEFINE_STATIC_KEY_FALSE(timers_migration_enabled);
static void timers_update_migration(void)
{
if (sysctl_timer_migration && tick_nohz_active)
static_branch_enable(&timers_migration_enabled);
else
static_branch_disable(&timers_migration_enabled);
}
#else
static inline void timers_update_migration(void) { }
#endif /* !CONFIG_SMP */
static void timer_update_keys(struct work_struct *work)
{
mutex_lock(&timer_keys_mutex);
timers_update_migration();
static_branch_enable(&timers_nohz_active);
mutex_unlock(&timer_keys_mutex);
}
void timers_update_nohz(void)
{
schedule_work(&timer_update_work);
}
int timer_migration_handler(struct ctl_table *table, int write,
void __user *buffer, size_t *lenp,
loff_t *ppos)
{
int ret;
mutex_lock(&timer_keys_mutex);
ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
if (!ret && write)
timers_update_migration();
mutex_unlock(&timer_keys_mutex);
return ret;
}
static inline bool is_timers_nohz_active(void)
{
return static_branch_unlikely(&timers_nohz_active);
}
#else
static inline bool is_timers_nohz_active(void) { return false; }
#endif /* NO_HZ_COMMON */
static unsigned long round_jiffies_common(unsigned long j, int cpu,
bool force_up)
{
int rem;
unsigned long original = j;
/*
* We don't want all cpus firing their timers at once hitting the
* same lock or cachelines, so we skew each extra cpu with an extra
* 3 jiffies. This 3 jiffies came originally from the mm/ code which
* already did this.
* The skew is done by adding 3*cpunr, then round, then subtract this
* extra offset again.
*/
j += cpu * 3;
rem = j % HZ;
/*
* If the target jiffie is just after a whole second (which can happen
* due to delays of the timer irq, long irq off times etc etc) then
* we should round down to the whole second, not up. Use 1/4th second
* as cutoff for this rounding as an extreme upper bound for this.
* But never round down if @force_up is set.
*/
if (rem < HZ/4 && !force_up) /* round down */
j = j - rem;
else /* round up */
j = j - rem + HZ;
/* now that we have rounded, subtract the extra skew again */
j -= cpu * 3;
/*
* Make sure j is still in the future. Otherwise return the
* unmodified value.
*/
return time_is_after_jiffies(j) ? j : original;
}
/**
* __round_jiffies - function to round jiffies to a full second
* @j: the time in (absolute) jiffies that should be rounded
* @cpu: the processor number on which the timeout will happen
*
* __round_jiffies() rounds an absolute time in the future (in jiffies)
* up or down to (approximately) full seconds. This is useful for timers
* for which the exact time they fire does not matter too much, as long as
* they fire approximately every X seconds.
*
* By rounding these timers to whole seconds, all such timers will fire
* at the same time, rather than at various times spread out. The goal
* of this is to have the CPU wake up less, which saves power.
*
* The exact rounding is skewed for each processor to avoid all
* processors firing at the exact same time, which could lead
* to lock contention or spurious cache line bouncing.
*
* The return value is the rounded version of the @j parameter.
*/
unsigned long __round_jiffies(unsigned long j, int cpu)
{
return round_jiffies_common(j, cpu, false);
}
EXPORT_SYMBOL_GPL(__round_jiffies);
/**
* __round_jiffies_relative - function to round jiffies to a full second
* @j: the time in (relative) jiffies that should be rounded
* @cpu: the processor number on which the timeout will happen
*
* __round_jiffies_relative() rounds a time delta in the future (in jiffies)
* up or down to (approximately) full seconds. This is useful for timers
* for which the exact time they fire does not matter too much, as long as
* they fire approximately every X seconds.
*
* By rounding these timers to whole seconds, all such timers will fire
* at the same time, rather than at various times spread out. The goal
* of this is to have the CPU wake up less, which saves power.
*
* The exact rounding is skewed for each processor to avoid all
* processors firing at the exact same time, which could lead
* to lock contention or spurious cache line bouncing.
*
* The return value is the rounded version of the @j parameter.
*/
unsigned long __round_jiffies_relative(unsigned long j, int cpu)
{
unsigned long j0 = jiffies;
/* Use j0 because jiffies might change while we run */
return round_jiffies_common(j + j0, cpu, false) - j0;
}
EXPORT_SYMBOL_GPL(__round_jiffies_relative);
/**
* round_jiffies - function to round jiffies to a full second
* @j: the time in (absolute) jiffies that should be rounded
*
* round_jiffies() rounds an absolute time in the future (in jiffies)
* up or down to (approximately) full seconds. This is useful for timers
* for which the exact time they fire does not matter too much, as long as
* they fire approximately every X seconds.
*
* By rounding these timers to whole seconds, all such timers will fire
* at the same time, rather than at various times spread out. The goal
* of this is to have the CPU wake up less, which saves power.
*
* The return value is the rounded version of the @j parameter.
*/
unsigned long round_jiffies(unsigned long j)
{
return round_jiffies_common(j, raw_smp_processor_id(), false);
}
EXPORT_SYMBOL_GPL(round_jiffies);
/**
* round_jiffies_relative - function to round jiffies to a full second
* @j: the time in (relative) jiffies that should be rounded
*
* round_jiffies_relative() rounds a time delta in the future (in jiffies)
* up or down to (approximately) full seconds. This is useful for timers
* for which the exact time they fire does not matter too much, as long as
* they fire approximately every X seconds.
*
* By rounding these timers to whole seconds, all such timers will fire
* at the same time, rather than at various times spread out. The goal
* of this is to have the CPU wake up less, which saves power.
*
* The return value is the rounded version of the @j parameter.
*/
unsigned long round_jiffies_relative(unsigned long j)
{
return __round_jiffies_relative(j, raw_smp_processor_id());
}
EXPORT_SYMBOL_GPL(round_jiffies_relative);
/**
* __round_jiffies_up - function to round jiffies up to a full second
* @j: the time in (absolute) jiffies that should be rounded
* @cpu: the processor number on which the timeout will happen
*
* This is the same as __round_jiffies() except that it will never
* round down. This is useful for timeouts for which the exact time
* of firing does not matter too much, as long as they don't fire too
* early.
*/
unsigned long __round_jiffies_up(unsigned long j, int cpu)
{
return round_jiffies_common(j, cpu, true);
}
EXPORT_SYMBOL_GPL(__round_jiffies_up);
/**
* __round_jiffies_up_relative - function to round jiffies up to a full second
* @j: the time in (relative) jiffies that should be rounded
* @cpu: the processor number on which the timeout will happen
*
* This is the same as __round_jiffies_relative() except that it will never
* round down. This is useful for timeouts for which the exact time
* of firing does not matter too much, as long as they don't fire too
* early.
*/
unsigned long __round_jiffies_up_relative(unsigned long j, int cpu)
{
unsigned long j0 = jiffies;
/* Use j0 because jiffies might change while we run */
return round_jiffies_common(j + j0, cpu, true) - j0;
}
EXPORT_SYMBOL_GPL(__round_jiffies_up_relative);
/**
* round_jiffies_up - function to round jiffies up to a full second
* @j: the time in (absolute) jiffies that should be rounded
*
* This is the same as round_jiffies() except that it will never
* round down. This is useful for timeouts for which the exact time
* of firing does not matter too much, as long as they don't fire too
* early.
*/
unsigned long round_jiffies_up(unsigned long j)
{
return round_jiffies_common(j, raw_smp_processor_id(), true);
}
EXPORT_SYMBOL_GPL(round_jiffies_up);
/**
* round_jiffies_up_relative - function to round jiffies up to a full second
* @j: the time in (relative) jiffies that should be rounded
*
* This is the same as round_jiffies_relative() except that it will never
* round down. This is useful for timeouts for which the exact time
* of firing does not matter too much, as long as they don't fire too
* early.
*/
unsigned long round_jiffies_up_relative(unsigned long j)
{
return __round_jiffies_up_relative(j, raw_smp_processor_id());
}
EXPORT_SYMBOL_GPL(round_jiffies_up_relative);
static inline unsigned int timer_get_idx(struct timer_list *timer)
{
return (timer->flags & TIMER_ARRAYMASK) >> TIMER_ARRAYSHIFT;
}
static inline void timer_set_idx(struct timer_list *timer, unsigned int idx)
{
timer->flags = (timer->flags & ~TIMER_ARRAYMASK) |
idx << TIMER_ARRAYSHIFT;
}
/*
* Helper function to calculate the array index for a given expiry
* time.
*/
static inline unsigned calc_index(unsigned expires, unsigned lvl)
{
expires = (expires + LVL_GRAN(lvl)) >> LVL_SHIFT(lvl);
return LVL_OFFS(lvl) + (expires & LVL_MASK);
}
static int calc_wheel_index(unsigned long expires, unsigned long clk)
{
unsigned long delta = expires - clk;
unsigned int idx;
if (delta < LVL_START(1)) {
idx = calc_index(expires, 0);
} else if (delta < LVL_START(2)) {
idx = calc_index(expires, 1);
} else if (delta < LVL_START(3)) {
idx = calc_index(expires, 2);
} else if (delta < LVL_START(4)) {
idx = calc_index(expires, 3);
} else if (delta < LVL_START(5)) {
idx = calc_index(expires, 4);
} else if (delta < LVL_START(6)) {
idx = calc_index(expires, 5);
} else if (delta < LVL_START(7)) {
idx = calc_index(expires, 6);
} else if (LVL_DEPTH > 8 && delta < LVL_START(8)) {
idx = calc_index(expires, 7);
} else if ((long) delta < 0) {
idx = clk & LVL_MASK;
} else {
/*
* Force expire obscene large timeouts to expire at the
* capacity limit of the wheel.
*/
if (expires >= WHEEL_TIMEOUT_CUTOFF)
expires = WHEEL_TIMEOUT_MAX;
idx = calc_index(expires, LVL_DEPTH - 1);
}
return idx;
}
/*
* Enqueue the timer into the hash bucket, mark it pending in
* the bitmap and store the index in the timer flags.
*/
static void enqueue_timer(struct timer_base *base, struct timer_list *timer,
unsigned int idx)
{
hlist_add_head(&timer->entry, base->vectors + idx);
__set_bit(idx, base->pending_map);
timer_set_idx(timer, idx);
trace_timer_start(timer, timer->expires, timer->flags);
}
static void
__internal_add_timer(struct timer_base *base, struct timer_list *timer)
{
unsigned int idx;
idx = calc_wheel_index(timer->expires, base->clk);
enqueue_timer(base, timer, idx);
}
static void
trigger_dyntick_cpu(struct timer_base *base, struct timer_list *timer)
{
if (!is_timers_nohz_active())
return;
/*
* TODO: This wants some optimizing similar to the code below, but we
* will do that when we switch from push to pull for deferrable timers.
*/
if (timer->flags & TIMER_DEFERRABLE) {
if (tick_nohz_full_cpu(base->cpu))
wake_up_nohz_cpu(base->cpu);
return;
}
/*
* We might have to IPI the remote CPU if the base is idle and the
* timer is not deferrable. If the other CPU is on the way to idle
* then it can't set base->is_idle as we hold the base lock:
*/
if (!base->is_idle)
return;
/* Check whether this is the new first expiring timer: */
if (time_after_eq(timer->expires, base->next_expiry))
return;
/*
* Set the next expiry time and kick the CPU so it can reevaluate the
* wheel:
*/
base->next_expiry = timer->expires;
wake_up_nohz_cpu(base->cpu);
}
static void
internal_add_timer(struct timer_base *base, struct timer_list *timer)
{
__internal_add_timer(base, timer);
trigger_dyntick_cpu(base, timer);
}
#ifdef CONFIG_DEBUG_OBJECTS_TIMERS
static struct debug_obj_descr timer_debug_descr;
static void *timer_debug_hint(void *addr)
{
return ((struct timer_list *) addr)->function;
}
static bool timer_is_static_object(void *addr)
{
struct timer_list *timer = addr;
return (timer->entry.pprev == NULL &&
timer->entry.next == TIMER_ENTRY_STATIC);
}
/*
* fixup_init is called when:
* - an active object is initialized
*/
static bool timer_fixup_init(void *addr, enum debug_obj_state state)
{
struct timer_list *timer = addr;
switch (state) {
case ODEBUG_STATE_ACTIVE:
del_timer_sync(timer);
debug_object_init(timer, &timer_debug_descr);
return true;
default:
return false;
}
}
/* Stub timer callback for improperly used timers. */
static void stub_timer(struct timer_list *unused)
{
WARN_ON(1);
}
/*
* fixup_activate is called when:
* - an active object is activated
* - an unknown non-static object is activated
*/
static bool timer_fixup_activate(void *addr, enum debug_obj_state state)
{
struct timer_list *timer = addr;
switch (state) {
case ODEBUG_STATE_NOTAVAILABLE:
timer_setup(timer, stub_timer, 0);
return true;
case ODEBUG_STATE_ACTIVE:
WARN_ON(1);
/* fall through */
default:
return false;
}
}
/*
* fixup_free is called when:
* - an active object is freed
*/
static bool timer_fixup_free(void *addr, enum debug_obj_state state)
{
struct timer_list *timer = addr;
switch (state) {
case ODEBUG_STATE_ACTIVE:
del_timer_sync(timer);
debug_object_free(timer, &timer_debug_descr);
return true;
default:
return false;
}
}
/*
* fixup_assert_init is called when:
* - an untracked/uninit-ed object is found
*/
static bool timer_fixup_assert_init(void *addr, enum debug_obj_state state)
{
struct timer_list *timer = addr;
switch (state) {
case ODEBUG_STATE_NOTAVAILABLE:
timer_setup(timer, stub_timer, 0);
return true;
default:
return false;
}
}
static struct debug_obj_descr timer_debug_descr = {
.name = "timer_list",
.debug_hint = timer_debug_hint,
.is_static_object = timer_is_static_object,
.fixup_init = timer_fixup_init,
.fixup_activate = timer_fixup_activate,
.fixup_free = timer_fixup_free,
.fixup_assert_init = timer_fixup_assert_init,
};
static inline void debug_timer_init(struct timer_list *timer)
{
debug_object_init(timer, &timer_debug_descr);
}
static inline void debug_timer_activate(struct timer_list *timer)
{
debug_object_activate(timer, &timer_debug_descr);
}
static inline void debug_timer_deactivate(struct timer_list *timer)
{
debug_object_deactivate(timer, &timer_debug_descr);
}
static inline void debug_timer_free(struct timer_list *timer)
{
debug_object_free(timer, &timer_debug_descr);
}
static inline void debug_timer_assert_init(struct timer_list *timer)
{
debug_object_assert_init(timer, &timer_debug_descr);
}
static void do_init_timer(struct timer_list *timer,
void (*func)(struct timer_list *),
unsigned int flags,
const char *name, struct lock_class_key *key);
void init_timer_on_stack_key(struct timer_list *timer,
void (*func)(struct timer_list *),
unsigned int flags,
const char *name, struct lock_class_key *key)
{
debug_object_init_on_stack(timer, &timer_debug_descr);
do_init_timer(timer, func, flags, name, key);
}
EXPORT_SYMBOL_GPL(init_timer_on_stack_key);
void destroy_timer_on_stack(struct timer_list *timer)
{
debug_object_free(timer, &timer_debug_descr);
}
EXPORT_SYMBOL_GPL(destroy_timer_on_stack);
#else
static inline void debug_timer_init(struct timer_list *timer) { }
static inline void debug_timer_activate(struct timer_list *timer) { }
static inline void debug_timer_deactivate(struct timer_list *timer) { }
static inline void debug_timer_assert_init(struct timer_list *timer) { }
#endif
static inline void debug_init(struct timer_list *timer)
{
debug_timer_init(timer);
trace_timer_init(timer);
}
static inline void debug_deactivate(struct timer_list *timer)
{
debug_timer_deactivate(timer);
trace_timer_cancel(timer);
}
static inline void debug_assert_init(struct timer_list *timer)
{
debug_timer_assert_init(timer);
}
static void do_init_timer(struct timer_list *timer,
void (*func)(struct timer_list *),
unsigned int flags,
const char *name, struct lock_class_key *key)
{
timer->entry.pprev = NULL;
timer->function = func;
timer->flags = flags | raw_smp_processor_id();
lockdep_init_map(&timer->lockdep_map, name, key, 0);
}
/**
* init_timer_key - initialize a timer
* @timer: the timer to be initialized
* @func: timer callback function
* @flags: timer flags
* @name: name of the timer
* @key: lockdep class key of the fake lock used for tracking timer
* sync lock dependencies
*
* init_timer_key() must be done to a timer prior calling *any* of the
* other timer functions.
*/
void init_timer_key(struct timer_list *timer,
void (*func)(struct timer_list *), unsigned int flags,
const char *name, struct lock_class_key *key)
{
debug_init(timer);
do_init_timer(timer, func, flags, name, key);
}
EXPORT_SYMBOL(init_timer_key);
static inline void detach_timer(struct timer_list *timer, bool clear_pending)
{
struct hlist_node *entry = &timer->entry;
debug_deactivate(timer);
__hlist_del(entry);
if (clear_pending)
entry->pprev = NULL;
entry->next = LIST_POISON2;
}
static int detach_if_pending(struct timer_list *timer, struct timer_base *base,
bool clear_pending)
{
unsigned idx = timer_get_idx(timer);
if (!timer_pending(timer))
return 0;
if (hlist_is_singular_node(&timer->entry, base->vectors + idx))
__clear_bit(idx, base->pending_map);
detach_timer(timer, clear_pending);
return 1;
}
static inline struct timer_base *get_timer_cpu_base(u32 tflags, u32 cpu)
{
struct timer_base *base = per_cpu_ptr(&timer_bases[BASE_STD], cpu);
/*
* If the timer is deferrable and NO_HZ_COMMON is set then we need
* to use the deferrable base.
*/
if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && (tflags & TIMER_DEFERRABLE))
base = per_cpu_ptr(&timer_bases[BASE_DEF], cpu);
return base;
}
static inline struct timer_base *get_timer_this_cpu_base(u32 tflags)
{
struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
/*
* If the timer is deferrable and NO_HZ_COMMON is set then we need
* to use the deferrable base.
*/
if (IS_ENABLED(CONFIG_NO_HZ_COMMON) && (tflags & TIMER_DEFERRABLE))
base = this_cpu_ptr(&timer_bases[BASE_DEF]);
return base;
}
static inline struct timer_base *get_timer_base(u32 tflags)
{
return get_timer_cpu_base(tflags, tflags & TIMER_CPUMASK);
}
static inline struct timer_base *
get_target_base(struct timer_base *base, unsigned tflags)
{
#if defined(CONFIG_SMP) && defined(CONFIG_NO_HZ_COMMON)
if (static_branch_likely(&timers_migration_enabled) &&
!(tflags & TIMER_PINNED))
return get_timer_cpu_base(tflags, get_nohz_timer_target());
#endif
return get_timer_this_cpu_base(tflags);
}
static inline void forward_timer_base(struct timer_base *base)
{
#ifdef CONFIG_NO_HZ_COMMON
unsigned long jnow;
/*
* We only forward the base when we are idle or have just come out of
* idle (must_forward_clk logic), and have a delta between base clock
* and jiffies. In the common case, run_timers will take care of it.
*/
if (likely(!base->must_forward_clk))
return;
jnow = READ_ONCE(jiffies);
base->must_forward_clk = base->is_idle;
if ((long)(jnow - base->clk) < 2)
return;
/*
* If the next expiry value is > jiffies, then we fast forward to
* jiffies otherwise we forward to the next expiry value.
*/
if (time_after(base->next_expiry, jnow))
base->clk = jnow;
else
base->clk = base->next_expiry;
#endif
}
/*
* We are using hashed locking: Holding per_cpu(timer_bases[x]).lock means
* that all timers which are tied to this base are locked, and the base itself
* is locked too.
*
* So __run_timers/migrate_timers can safely modify all timers which could
* be found in the base->vectors array.
*
* When a timer is migrating then the TIMER_MIGRATING flag is set and we need
* to wait until the migration is done.
*/
static struct timer_base *lock_timer_base(struct timer_list *timer,
unsigned long *flags)
__acquires(timer->base->lock)
{
for (;;) {
struct timer_base *base;
u32 tf;
/*
* We need to use READ_ONCE() here, otherwise the compiler
* might re-read @tf between the check for TIMER_MIGRATING
* and spin_lock().
*/
tf = READ_ONCE(timer->flags);
if (!(tf & TIMER_MIGRATING)) {
base = get_timer_base(tf);
raw_spin_lock_irqsave(&base->lock, *flags);
if (timer->flags == tf)
return base;
raw_spin_unlock_irqrestore(&base->lock, *flags);
}
cpu_relax();
}
}
#define MOD_TIMER_PENDING_ONLY 0x01
#define MOD_TIMER_REDUCE 0x02
static inline int
__mod_timer(struct timer_list *timer, unsigned long expires, unsigned int options)
{
struct timer_base *base, *new_base;
unsigned int idx = UINT_MAX;
unsigned long clk = 0, flags;
int ret = 0;
BUG_ON(!timer->function);
/*
* This is a common optimization triggered by the networking code - if
* the timer is re-modified to have the same timeout or ends up in the
* same array bucket then just return:
*/
if (timer_pending(timer)) {
/*
* The downside of this optimization is that it can result in
* larger granularity than you would get from adding a new
* timer with this expiry.
*/
long diff = timer->expires - expires;
if (!diff)
return 1;
if (options & MOD_TIMER_REDUCE && diff <= 0)
return 1;
/*
* We lock timer base and calculate the bucket index right
* here. If the timer ends up in the same bucket, then we
* just update the expiry time and avoid the whole
* dequeue/enqueue dance.
*/
base = lock_timer_base(timer, &flags);
forward_timer_base(base);
if (timer_pending(timer) && (options & MOD_TIMER_REDUCE) &&
time_before_eq(timer->expires, expires)) {
ret = 1;
goto out_unlock;
}
clk = base->clk;
idx = calc_wheel_index(expires, clk);
/*
* Retrieve and compare the array index of the pending
* timer. If it matches set the expiry to the new value so a
* subsequent call will exit in the expires check above.
*/
if (idx == timer_get_idx(timer)) {
if (!(options & MOD_TIMER_REDUCE))
timer->expires = expires;
else if (time_after(timer->expires, expires))
timer->expires = expires;
ret = 1;
goto out_unlock;
}
} else {
base = lock_timer_base(timer, &flags);
forward_timer_base(base);
}
ret = detach_if_pending(timer, base, false);
if (!ret && (options & MOD_TIMER_PENDING_ONLY))
goto out_unlock;
new_base = get_target_base(base, timer->flags);
if (base != new_base) {
/*
* We are trying to schedule the timer on the new base.
* However we can't change timer's base while it is running,
* otherwise del_timer_sync() can't detect that the timer's
* handler yet has not finished. This also guarantees that the
* timer is serialized wrt itself.
*/
if (likely(base->running_timer != timer)) {
/* See the comment in lock_timer_base() */
timer->flags |= TIMER_MIGRATING;
raw_spin_unlock(&base->lock);
base = new_base;
raw_spin_lock(&base->lock);
WRITE_ONCE(timer->flags,
(timer->flags & ~TIMER_BASEMASK) | base->cpu);
forward_timer_base(base);
}
}
debug_timer_activate(timer);
timer->expires = expires;
/*
* If 'idx' was calculated above and the base time did not advance
* between calculating 'idx' and possibly switching the base, only
* enqueue_timer() and trigger_dyntick_cpu() is required. Otherwise
* we need to (re)calculate the wheel index via
* internal_add_timer().
*/
if (idx != UINT_MAX && clk == base->clk) {
enqueue_timer(base, timer, idx);
trigger_dyntick_cpu(base, timer);
} else {
internal_add_timer(base, timer);
}
out_unlock:
raw_spin_unlock_irqrestore(&base->lock, flags);
return ret;
}
/**
* mod_timer_pending - modify a pending timer's timeout
* @timer: the pending timer to be modified
* @expires: new timeout in jiffies
*
* mod_timer_pending() is the same for pending timers as mod_timer(),
* but will not re-activate and modify already deleted timers.
*
* It is useful for unserialized use of timers.
*/
int mod_timer_pending(struct timer_list *timer, unsigned long expires)
{
return __mod_timer(timer, expires, MOD_TIMER_PENDING_ONLY);
}
EXPORT_SYMBOL(mod_timer_pending);
/**
* mod_timer - modify a timer's timeout
* @timer: the timer to be modified
* @expires: new timeout in jiffies
*
* mod_timer() is a more efficient way to update the expire field of an
* active timer (if the timer is inactive it will be activated)
*
* mod_timer(timer, expires) is equivalent to:
*
* del_timer(timer); timer->expires = expires; add_timer(timer);
*
* Note that if there are multiple unserialized concurrent users of the
* same timer, then mod_timer() is the only safe way to modify the timeout,
* since add_timer() cannot modify an already running timer.
*
* The function returns whether it has modified a pending timer or not.
* (ie. mod_timer() of an inactive timer returns 0, mod_timer() of an
* active timer returns 1.)
*/
int mod_timer(struct timer_list *timer, unsigned long expires)
{
return __mod_timer(timer, expires, 0);
}
EXPORT_SYMBOL(mod_timer);
/**
* timer_reduce - Modify a timer's timeout if it would reduce the timeout
* @timer: The timer to be modified
* @expires: New timeout in jiffies
*
* timer_reduce() is very similar to mod_timer(), except that it will only
* modify a running timer if that would reduce the expiration time (it will
* start a timer that isn't running).
*/
int timer_reduce(struct timer_list *timer, unsigned long expires)
{
return __mod_timer(timer, expires, MOD_TIMER_REDUCE);
}
EXPORT_SYMBOL(timer_reduce);
/**
* add_timer - start a timer
* @timer: the timer to be added
*
* The kernel will do a ->function(@timer) callback from the
* timer interrupt at the ->expires point in the future. The
* current time is 'jiffies'.
*
* The timer's ->expires, ->function fields must be set prior calling this
* function.
*
* Timers with an ->expires field in the past will be executed in the next
* timer tick.
*/
void add_timer(struct timer_list *timer)
{
BUG_ON(timer_pending(timer));
mod_timer(timer, timer->expires);
}
EXPORT_SYMBOL(add_timer);
/**
* add_timer_on - start a timer on a particular CPU
* @timer: the timer to be added
* @cpu: the CPU to start it on
*
* This is not very scalable on SMP. Double adds are not possible.
*/
void add_timer_on(struct timer_list *timer, int cpu)
{
struct timer_base *new_base, *base;
unsigned long flags;
BUG_ON(timer_pending(timer) || !timer->function);
new_base = get_timer_cpu_base(timer->flags, cpu);
/*
* If @timer was on a different CPU, it should be migrated with the
* old base locked to prevent other operations proceeding with the
* wrong base locked. See lock_timer_base().
*/
base = lock_timer_base(timer, &flags);
if (base != new_base) {
timer->flags |= TIMER_MIGRATING;
raw_spin_unlock(&base->lock);
base = new_base;
raw_spin_lock(&base->lock);
WRITE_ONCE(timer->flags,
(timer->flags & ~TIMER_BASEMASK) | cpu);
}
forward_timer_base(base);
debug_timer_activate(timer);
internal_add_timer(base, timer);
raw_spin_unlock_irqrestore(&base->lock, flags);
}
EXPORT_SYMBOL_GPL(add_timer_on);
/**
* del_timer - deactivate a timer.
* @timer: the timer to be deactivated
*
* del_timer() deactivates a timer - this works on both active and inactive
* timers.
*
* The function returns whether it has deactivated a pending timer or not.
* (ie. del_timer() of an inactive timer returns 0, del_timer() of an
* active timer returns 1.)
*/
int del_timer(struct timer_list *timer)
{
struct timer_base *base;
unsigned long flags;
int ret = 0;
debug_assert_init(timer);
if (timer_pending(timer)) {
base = lock_timer_base(timer, &flags);
ret = detach_if_pending(timer, base, true);
raw_spin_unlock_irqrestore(&base->lock, flags);
}
return ret;
}
EXPORT_SYMBOL(del_timer);
/**
* try_to_del_timer_sync - Try to deactivate a timer
* @timer: timer to delete
*
* This function tries to deactivate a timer. Upon successful (ret >= 0)
* exit the timer is not queued and the handler is not running on any CPU.
*/
int try_to_del_timer_sync(struct timer_list *timer)
{
struct timer_base *base;
unsigned long flags;
int ret = -1;
debug_assert_init(timer);
base = lock_timer_base(timer, &flags);
if (base->running_timer != timer)
ret = detach_if_pending(timer, base, true);
raw_spin_unlock_irqrestore(&base->lock, flags);
return ret;
}
EXPORT_SYMBOL(try_to_del_timer_sync);
#ifdef CONFIG_PREEMPT_RT
static __init void timer_base_init_expiry_lock(struct timer_base *base)
{
spin_lock_init(&base->expiry_lock);
}
static inline void timer_base_lock_expiry(struct timer_base *base)
{
spin_lock(&base->expiry_lock);
}
static inline void timer_base_unlock_expiry(struct timer_base *base)
{
spin_unlock(&base->expiry_lock);
}
/*
* The counterpart to del_timer_wait_running().
*
* If there is a waiter for base->expiry_lock, then it was waiting for the
* timer callback to finish. Drop expiry_lock and reaquire it. That allows
* the waiter to acquire the lock and make progress.
*/
static void timer_sync_wait_running(struct timer_base *base)
{
if (atomic_read(&base->timer_waiters)) {
spin_unlock(&base->expiry_lock);
spin_lock(&base->expiry_lock);
}
}
/*
* This function is called on PREEMPT_RT kernels when the fast path
* deletion of a timer failed because the timer callback function was
* running.
*
* This prevents priority inversion, if the softirq thread on a remote CPU
* got preempted, and it prevents a life lock when the task which tries to
* delete a timer preempted the softirq thread running the timer callback
* function.
*/
static void del_timer_wait_running(struct timer_list *timer)
{
u32 tf;
tf = READ_ONCE(timer->flags);
if (!(tf & TIMER_MIGRATING)) {
struct timer_base *base = get_timer_base(tf);
/*
* Mark the base as contended and grab the expiry lock,
* which is held by the softirq across the timer
* callback. Drop the lock immediately so the softirq can
* expire the next timer. In theory the timer could already
* be running again, but that's more than unlikely and just
* causes another wait loop.
*/
atomic_inc(&base->timer_waiters);
spin_lock_bh(&base->expiry_lock);
atomic_dec(&base->timer_waiters);
spin_unlock_bh(&base->expiry_lock);
}
}
#else
static inline void timer_base_init_expiry_lock(struct timer_base *base) { }
static inline void timer_base_lock_expiry(struct timer_base *base) { }
static inline void timer_base_unlock_expiry(struct timer_base *base) { }
static inline void timer_sync_wait_running(struct timer_base *base) { }
static inline void del_timer_wait_running(struct timer_list *timer) { }
#endif
#if defined(CONFIG_SMP) || defined(CONFIG_PREEMPT_RT)
/**
* del_timer_sync - deactivate a timer and wait for the handler to finish.
* @timer: the timer to be deactivated
*
* This function only differs from del_timer() on SMP: besides deactivating
* the timer it also makes sure the handler has finished executing on other
* CPUs.
*
* Synchronization rules: Callers must prevent restarting of the timer,
* otherwise this function is meaningless. It must not be called from
* interrupt contexts unless the timer is an irqsafe one. The caller must
* not hold locks which would prevent completion of the timer's
* handler. The timer's handler must not call add_timer_on(). Upon exit the
* timer is not queued and the handler is not running on any CPU.
*
* Note: For !irqsafe timers, you must not hold locks that are held in
* interrupt context while calling this function. Even if the lock has
* nothing to do with the timer in question. Here's why::
*
* CPU0 CPU1
* ---- ----
* <SOFTIRQ>
* call_timer_fn();
* base->running_timer = mytimer;
* spin_lock_irq(somelock);
* <IRQ>
* spin_lock(somelock);
* del_timer_sync(mytimer);
* while (base->running_timer == mytimer);
*
* Now del_timer_sync() will never return and never release somelock.
* The interrupt on the other CPU is waiting to grab somelock but
* it has interrupted the softirq that CPU0 is waiting to finish.
*
* The function returns whether it has deactivated a pending timer or not.
*/
int del_timer_sync(struct timer_list *timer)
{
int ret;
#ifdef CONFIG_LOCKDEP
unsigned long flags;
/*
* If lockdep gives a backtrace here, please reference
* the synchronization rules above.
*/
local_irq_save(flags);
lock_map_acquire(&timer->lockdep_map);
lock_map_release(&timer->lockdep_map);
local_irq_restore(flags);
#endif
/*
* don't use it in hardirq context, because it
* could lead to deadlock.
*/
WARN_ON(in_irq() && !(timer->flags & TIMER_IRQSAFE));
do {
ret = try_to_del_timer_sync(timer);
if (unlikely(ret < 0)) {
del_timer_wait_running(timer);
cpu_relax();
}
} while (ret < 0);
return ret;
}
EXPORT_SYMBOL(del_timer_sync);
#endif
static void call_timer_fn(struct timer_list *timer,
void (*fn)(struct timer_list *),
unsigned long baseclk)
{
int count = preempt_count();
#ifdef CONFIG_LOCKDEP
/*
* It is permissible to free the timer from inside the
* function that is called from it, this we need to take into
* account for lockdep too. To avoid bogus "held lock freed"
* warnings as well as problems when looking into
* timer->lockdep_map, make a copy and use that here.
*/
struct lockdep_map lockdep_map;
lockdep_copy_map(&lockdep_map, &timer->lockdep_map);
#endif
/*
* Couple the lock chain with the lock chain at
* del_timer_sync() by acquiring the lock_map around the fn()
* call here and in del_timer_sync().
*/
lock_map_acquire(&lockdep_map);
trace_timer_expire_entry(timer, baseclk);
fn(timer);
trace_timer_expire_exit(timer);
lock_map_release(&lockdep_map);
if (count != preempt_count()) {
WARN_ONCE(1, "timer: %pS preempt leak: %08x -> %08x\n",
fn, count, preempt_count());
/*
* Restore the preempt count. That gives us a decent
* chance to survive and extract information. If the
* callback kept a lock held, bad luck, but not worse
* than the BUG() we had.
*/
preempt_count_set(count);
}
}
static void expire_timers(struct timer_base *base, struct hlist_head *head)
{
/*
* This value is required only for tracing. base->clk was
* incremented directly before expire_timers was called. But expiry
* is related to the old base->clk value.
*/
unsigned long baseclk = base->clk - 1;
while (!hlist_empty(head)) {
struct timer_list *timer;
void (*fn)(struct timer_list *);
timer = hlist_entry(head->first, struct timer_list, entry);
base->running_timer = timer;
detach_timer(timer, true);
fn = timer->function;
if (timer->flags & TIMER_IRQSAFE) {
raw_spin_unlock(&base->lock);
call_timer_fn(timer, fn, baseclk);
base->running_timer = NULL;
raw_spin_lock(&base->lock);
} else {
raw_spin_unlock_irq(&base->lock);
call_timer_fn(timer, fn, baseclk);
base->running_timer = NULL;
timer_sync_wait_running(base);
raw_spin_lock_irq(&base->lock);
}
}
}
static int __collect_expired_timers(struct timer_base *base,
struct hlist_head *heads)
{
unsigned long clk = base->clk;
struct hlist_head *vec;
int i, levels = 0;
unsigned int idx;
for (i = 0; i < LVL_DEPTH; i++) {
idx = (clk & LVL_MASK) + i * LVL_SIZE;
if (__test_and_clear_bit(idx, base->pending_map)) {
vec = base->vectors + idx;
hlist_move_list(vec, heads++);
levels++;
}
/* Is it time to look at the next level? */
if (clk & LVL_CLK_MASK)
break;
/* Shift clock for the next level granularity */
clk >>= LVL_CLK_SHIFT;
}
return levels;
}
#ifdef CONFIG_NO_HZ_COMMON
/*
* Find the next pending bucket of a level. Search from level start (@offset)
* + @clk upwards and if nothing there, search from start of the level
* (@offset) up to @offset + clk.
*/
static int next_pending_bucket(struct timer_base *base, unsigned offset,
unsigned clk)
{
unsigned pos, start = offset + clk;
unsigned end = offset + LVL_SIZE;
pos = find_next_bit(base->pending_map, end, start);
if (pos < end)
return pos - start;
pos = find_next_bit(base->pending_map, start, offset);
return pos < start ? pos + LVL_SIZE - start : -1;
}
/*
* Search the first expiring timer in the various clock levels. Caller must
* hold base->lock.
*/
static unsigned long __next_timer_interrupt(struct timer_base *base)
{
unsigned long clk, next, adj;
unsigned lvl, offset = 0;
next = base->clk + NEXT_TIMER_MAX_DELTA;
clk = base->clk;
for (lvl = 0; lvl < LVL_DEPTH; lvl++, offset += LVL_SIZE) {
int pos = next_pending_bucket(base, offset, clk & LVL_MASK);
if (pos >= 0) {
unsigned long tmp = clk + (unsigned long) pos;
tmp <<= LVL_SHIFT(lvl);
if (time_before(tmp, next))
next = tmp;
}
/*
* Clock for the next level. If the current level clock lower
* bits are zero, we look at the next level as is. If not we
* need to advance it by one because that's going to be the
* next expiring bucket in that level. base->clk is the next
* expiring jiffie. So in case of:
*
* LVL5 LVL4 LVL3 LVL2 LVL1 LVL0
* 0 0 0 0 0 0
*
* we have to look at all levels @index 0. With
*
* LVL5 LVL4 LVL3 LVL2 LVL1 LVL0
* 0 0 0 0 0 2
*
* LVL0 has the next expiring bucket @index 2. The upper
* levels have the next expiring bucket @index 1.
*
* In case that the propagation wraps the next level the same
* rules apply:
*
* LVL5 LVL4 LVL3 LVL2 LVL1 LVL0
* 0 0 0 0 F 2
*
* So after looking at LVL0 we get:
*
* LVL5 LVL4 LVL3 LVL2 LVL1
* 0 0 0 1 0
*
* So no propagation from LVL1 to LVL2 because that happened
* with the add already, but then we need to propagate further
* from LVL2 to LVL3.
*
* So the simple check whether the lower bits of the current
* level are 0 or not is sufficient for all cases.
*/
adj = clk & LVL_CLK_MASK ? 1 : 0;
clk >>= LVL_CLK_SHIFT;
clk += adj;
}
return next;
}
/*
* Check, if the next hrtimer event is before the next timer wheel
* event:
*/
static u64 cmp_next_hrtimer_event(u64 basem, u64 expires)
{
u64 nextevt = hrtimer_get_next_event();
/*
* If high resolution timers are enabled
* hrtimer_get_next_event() returns KTIME_MAX.
*/
if (expires <= nextevt)
return expires;
/*
* If the next timer is already expired, return the tick base
* time so the tick is fired immediately.
*/
if (nextevt <= basem)
return basem;
/*
* Round up to the next jiffie. High resolution timers are
* off, so the hrtimers are expired in the tick and we need to
* make sure that this tick really expires the timer to avoid
* a ping pong of the nohz stop code.
*
* Use DIV_ROUND_UP_ULL to prevent gcc calling __divdi3
*/
return DIV_ROUND_UP_ULL(nextevt, TICK_NSEC) * TICK_NSEC;
}
/**
* get_next_timer_interrupt - return the time (clock mono) of the next timer
* @basej: base time jiffies
* @basem: base time clock monotonic
*
* Returns the tick aligned clock monotonic time of the next pending
* timer or KTIME_MAX if no timer is pending.
*/
u64 get_next_timer_interrupt(unsigned long basej, u64 basem)
{
struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
u64 expires = KTIME_MAX;
unsigned long nextevt;
bool is_max_delta;
/*
* Pretend that there is no timer pending if the cpu is offline.
* Possible pending timers will be migrated later to an active cpu.
*/
if (cpu_is_offline(smp_processor_id()))
return expires;
raw_spin_lock(&base->lock);
nextevt = __next_timer_interrupt(base);
is_max_delta = (nextevt == base->clk + NEXT_TIMER_MAX_DELTA);
base->next_expiry = nextevt;
/*
* We have a fresh next event. Check whether we can forward the
* base. We can only do that when @basej is past base->clk
* otherwise we might rewind base->clk.
*/
if (time_after(basej, base->clk)) {
if (time_after(nextevt, basej))
base->clk = basej;
else if (time_after(nextevt, base->clk))
base->clk = nextevt;
}
if (time_before_eq(nextevt, basej)) {
expires = basem;
base->is_idle = false;
} else {
if (!is_max_delta)
expires = basem + (u64)(nextevt - basej) * TICK_NSEC;
/*
* If we expect to sleep more than a tick, mark the base idle.
* Also the tick is stopped so any added timer must forward
* the base clk itself to keep granularity small. This idle
* logic is only maintained for the BASE_STD base, deferrable
* timers may still see large granularity skew (by design).
*/
if ((expires - basem) > TICK_NSEC) {
base->must_forward_clk = true;
base->is_idle = true;
}
}
raw_spin_unlock(&base->lock);
return cmp_next_hrtimer_event(basem, expires);
}
/**
* timer_clear_idle - Clear the idle state of the timer base
*
* Called with interrupts disabled
*/
void timer_clear_idle(void)
{
struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
/*
* We do this unlocked. The worst outcome is a remote enqueue sending
* a pointless IPI, but taking the lock would just make the window for
* sending the IPI a few instructions smaller for the cost of taking
* the lock in the exit from idle path.
*/
base->is_idle = false;
}
static int collect_expired_timers(struct timer_base *base,
struct hlist_head *heads)
{
unsigned long now = READ_ONCE(jiffies);
/*
* NOHZ optimization. After a long idle sleep we need to forward the
* base to current jiffies. Avoid a loop by searching the bitfield for
* the next expiring timer.
*/
if ((long)(now - base->clk) > 2) {
unsigned long next = __next_timer_interrupt(base);
/*
* If the next timer is ahead of time forward to current
* jiffies, otherwise forward to the next expiry time:
*/
if (time_after(next, now)) {
/*
* The call site will increment base->clk and then
* terminate the expiry loop immediately.
*/
base->clk = now;
return 0;
}
base->clk = next;
}
return __collect_expired_timers(base, heads);
}
#else
static inline int collect_expired_timers(struct timer_base *base,
struct hlist_head *heads)
{
return __collect_expired_timers(base, heads);
}
#endif
/*
* Called from the timer interrupt handler to charge one tick to the current
* process. user_tick is 1 if the tick is user time, 0 for system.
*/
void update_process_times(int user_tick)
{
struct task_struct *p = current;
/* Note: this timer irq context must be accounted for as well. */
account_process_tick(p, user_tick);
run_local_timers();
rcu_sched_clock_irq(user_tick);
#ifdef CONFIG_IRQ_WORK
if (in_irq())
irq_work_tick();
#endif
scheduler_tick();
if (IS_ENABLED(CONFIG_POSIX_TIMERS))
run_posix_cpu_timers();
}
/**
* __run_timers - run all expired timers (if any) on this CPU.
* @base: the timer vector to be processed.
*/
static inline void __run_timers(struct timer_base *base)
{
struct hlist_head heads[LVL_DEPTH];
int levels;
if (!time_after_eq(jiffies, base->clk))
return;
timer_base_lock_expiry(base);
raw_spin_lock_irq(&base->lock);
/*
* timer_base::must_forward_clk must be cleared before running
* timers so that any timer functions that call mod_timer() will
* not try to forward the base. Idle tracking / clock forwarding
* logic is only used with BASE_STD timers.
*
* The must_forward_clk flag is cleared unconditionally also for
* the deferrable base. The deferrable base is not affected by idle
* tracking and never forwarded, so clearing the flag is a NOOP.
*
* The fact that the deferrable base is never forwarded can cause
* large variations in granularity for deferrable timers, but they
* can be deferred for long periods due to idle anyway.
*/
base->must_forward_clk = false;
while (time_after_eq(jiffies, base->clk)) {
levels = collect_expired_timers(base, heads);
base->clk++;
while (levels--)
expire_timers(base, heads + levels);
}
raw_spin_unlock_irq(&base->lock);
timer_base_unlock_expiry(base);
}
/*
* This function runs timers and the timer-tq in bottom half context.
*/
static __latent_entropy void run_timer_softirq(struct softirq_action *h)
{
struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
__run_timers(base);
if (IS_ENABLED(CONFIG_NO_HZ_COMMON))
__run_timers(this_cpu_ptr(&timer_bases[BASE_DEF]));
}
/*
* Called by the local, per-CPU timer interrupt on SMP.
*/
void run_local_timers(void)
{
struct timer_base *base = this_cpu_ptr(&timer_bases[BASE_STD]);
hrtimer_run_queues();
/* Raise the softirq only if required. */
if (time_before(jiffies, base->clk)) {
if (!IS_ENABLED(CONFIG_NO_HZ_COMMON))
return;
/* CPU is awake, so check the deferrable base. */
base++;
if (time_before(jiffies, base->clk))
return;
}
raise_softirq(TIMER_SOFTIRQ);
}
/*
* Since schedule_timeout()'s timer is defined on the stack, it must store
* the target task on the stack as well.
*/
struct process_timer {
struct timer_list timer;
struct task_struct *task;
};
static void process_timeout(struct timer_list *t)
{
struct process_timer *timeout = from_timer(timeout, t, timer);
wake_up_process(timeout->task);
}
/**
* schedule_timeout - sleep until timeout
* @timeout: timeout value in jiffies
*
* Make the current task sleep until @timeout jiffies have
* elapsed. The routine will return immediately unless
* the current task state has been set (see set_current_state()).
*
* You can set the task state as follows -
*
* %TASK_UNINTERRUPTIBLE - at least @timeout jiffies are guaranteed to
* pass before the routine returns unless the current task is explicitly
* woken up, (e.g. by wake_up_process())".
*
* %TASK_INTERRUPTIBLE - the routine may return early if a signal is
* delivered to the current task or the current task is explicitly woken
* up.
*
* The current task state is guaranteed to be TASK_RUNNING when this
* routine returns.
*
* Specifying a @timeout value of %MAX_SCHEDULE_TIMEOUT will schedule
* the CPU away without a bound on the timeout. In this case the return
* value will be %MAX_SCHEDULE_TIMEOUT.
*
* Returns 0 when the timer has expired otherwise the remaining time in
* jiffies will be returned. In all cases the return value is guaranteed
* to be non-negative.
*/
signed long __sched schedule_timeout(signed long timeout)
{
struct process_timer timer;
unsigned long expire;
switch (timeout)
{
case MAX_SCHEDULE_TIMEOUT:
/*
* These two special cases are useful to be comfortable
* in the caller. Nothing more. We could take
* MAX_SCHEDULE_TIMEOUT from one of the negative value
* but I' d like to return a valid offset (>=0) to allow
* the caller to do everything it want with the retval.
*/
schedule();
goto out;
default:
/*
* Another bit of PARANOID. Note that the retval will be
* 0 since no piece of kernel is supposed to do a check
* for a negative retval of schedule_timeout() (since it
* should never happens anyway). You just have the printk()
* that will tell you if something is gone wrong and where.
*/
if (timeout < 0) {
printk(KERN_ERR "schedule_timeout: wrong timeout "
"value %lx\n", timeout);
dump_stack();
current->state = TASK_RUNNING;
goto out;
}
}
expire = timeout + jiffies;
timer.task = current;
timer_setup_on_stack(&timer.timer, process_timeout, 0);
__mod_timer(&timer.timer, expire, 0);
schedule();
del_singleshot_timer_sync(&timer.timer);
/* Remove the timer from the object tracker */
destroy_timer_on_stack(&timer.timer);
timeout = expire - jiffies;
out:
return timeout < 0 ? 0 : timeout;
}
EXPORT_SYMBOL(schedule_timeout);
/*
* We can use __set_current_state() here because schedule_timeout() calls
* schedule() unconditionally.
*/
signed long __sched schedule_timeout_interruptible(signed long timeout)
{
__set_current_state(TASK_INTERRUPTIBLE);
return schedule_timeout(timeout);
}
EXPORT_SYMBOL(schedule_timeout_interruptible);
signed long __sched schedule_timeout_killable(signed long timeout)
{
__set_current_state(TASK_KILLABLE);
return schedule_timeout(timeout);
}
EXPORT_SYMBOL(schedule_timeout_killable);
signed long __sched schedule_timeout_uninterruptible(signed long timeout)
{
__set_current_state(TASK_UNINTERRUPTIBLE);
return schedule_timeout(timeout);
}
EXPORT_SYMBOL(schedule_timeout_uninterruptible);
/*
* Like schedule_timeout_uninterruptible(), except this task will not contribute
* to load average.
*/
signed long __sched schedule_timeout_idle(signed long timeout)
{
__set_current_state(TASK_IDLE);
return schedule_timeout(timeout);
}
EXPORT_SYMBOL(schedule_timeout_idle);
#ifdef CONFIG_HOTPLUG_CPU
static void migrate_timer_list(struct timer_base *new_base, struct hlist_head *head)
{
struct timer_list *timer;
int cpu = new_base->cpu;
while (!hlist_empty(head)) {
timer = hlist_entry(head->first, struct timer_list, entry);
detach_timer(timer, false);
timer->flags = (timer->flags & ~TIMER_BASEMASK) | cpu;
internal_add_timer(new_base, timer);
}
}
int timers_prepare_cpu(unsigned int cpu)
{
struct timer_base *base;
int b;
for (b = 0; b < NR_BASES; b++) {
base = per_cpu_ptr(&timer_bases[b], cpu);
base->clk = jiffies;
base->next_expiry = base->clk + NEXT_TIMER_MAX_DELTA;
base->is_idle = false;
base->must_forward_clk = true;
}
return 0;
}
int timers_dead_cpu(unsigned int cpu)
{
struct timer_base *old_base;
struct timer_base *new_base;
int b, i;
BUG_ON(cpu_online(cpu));
for (b = 0; b < NR_BASES; b++) {
old_base = per_cpu_ptr(&timer_bases[b], cpu);
new_base = get_cpu_ptr(&timer_bases[b]);
/*
* The caller is globally serialized and nobody else
* takes two locks at once, deadlock is not possible.
*/
raw_spin_lock_irq(&new_base->lock);
raw_spin_lock_nested(&old_base->lock, SINGLE_DEPTH_NESTING);
/*
* The current CPUs base clock might be stale. Update it
* before moving the timers over.
*/
forward_timer_base(new_base);
BUG_ON(old_base->running_timer);
for (i = 0; i < WHEEL_SIZE; i++)
migrate_timer_list(new_base, old_base->vectors + i);
raw_spin_unlock(&old_base->lock);
raw_spin_unlock_irq(&new_base->lock);
put_cpu_ptr(&timer_bases);
}
return 0;
}
#endif /* CONFIG_HOTPLUG_CPU */
static void __init init_timer_cpu(int cpu)
{
struct timer_base *base;
int i;
for (i = 0; i < NR_BASES; i++) {
base = per_cpu_ptr(&timer_bases[i], cpu);
base->cpu = cpu;
raw_spin_lock_init(&base->lock);
base->clk = jiffies;
timer_base_init_expiry_lock(base);
}
}
static void __init init_timer_cpus(void)
{
int cpu;
for_each_possible_cpu(cpu)
init_timer_cpu(cpu);
}
void __init init_timers(void)
{
init_timer_cpus();
open_softirq(TIMER_SOFTIRQ, run_timer_softirq);
}
/**
* msleep - sleep safely even with waitqueue interruptions
* @msecs: Time in milliseconds to sleep for
*/
void msleep(unsigned int msecs)
{
unsigned long timeout = msecs_to_jiffies(msecs) + 1;
while (timeout)
timeout = schedule_timeout_uninterruptible(timeout);
}
EXPORT_SYMBOL(msleep);
/**
* msleep_interruptible - sleep waiting for signals
* @msecs: Time in milliseconds to sleep for
*/
unsigned long msleep_interruptible(unsigned int msecs)
{
unsigned long timeout = msecs_to_jiffies(msecs) + 1;
while (timeout && !signal_pending(current))
timeout = schedule_timeout_interruptible(timeout);
return jiffies_to_msecs(timeout);
}
EXPORT_SYMBOL(msleep_interruptible);
/**
* usleep_range - Sleep for an approximate time
* @min: Minimum time in usecs to sleep
* @max: Maximum time in usecs to sleep
*
* In non-atomic context where the exact wakeup time is flexible, use
* usleep_range() instead of udelay(). The sleep improves responsiveness
* by avoiding the CPU-hogging busy-wait of udelay(), and the range reduces
* power usage by allowing hrtimers to take advantage of an already-
* scheduled interrupt instead of scheduling a new one just for this sleep.
*/
void __sched usleep_range(unsigned long min, unsigned long max)
{
ktime_t exp = ktime_add_us(ktime_get(), min);
u64 delta = (u64)(max - min) * NSEC_PER_USEC;
for (;;) {
__set_current_state(TASK_UNINTERRUPTIBLE);
/* Do not return before the requested sleep time has elapsed */
if (!schedule_hrtimeout_range(&exp, delta, HRTIMER_MODE_ABS))
break;
}
}
EXPORT_SYMBOL(usleep_range);