k3.h
/* SPDX-License-Identifier: GPL-2.0 */
/*
* This header provides constants for pinctrl bindings for TI's K3 SoC
* family.
*
* Copyright (C) 2018-2021 Texas Instruments Incorporated - https://www.ti.com/
*/
#ifndef _DT_BINDINGS_PINCTRL_TI_K3_H
#define _DT_BINDINGS_PINCTRL_TI_K3_H
#define PULLUDEN_SHIFT (16)
#define PULLTYPESEL_SHIFT (17)
#define RXACTIVE_SHIFT (18)
#define PULL_DISABLE (1 << PULLUDEN_SHIFT)
#define PULL_ENABLE (0 << PULLUDEN_SHIFT)
#define PULL_UP (1 << PULLTYPESEL_SHIFT | PULL_ENABLE)
#define PULL_DOWN (0 << PULLTYPESEL_SHIFT | PULL_ENABLE)
#define INPUT_EN (1 << RXACTIVE_SHIFT)
#define INPUT_DISABLE (0 << RXACTIVE_SHIFT)
/* Only these macros are expected be used directly in device tree files */
#define PIN_OUTPUT (INPUT_DISABLE | PULL_DISABLE)
#define PIN_OUTPUT_PULLUP (INPUT_DISABLE | PULL_UP)
#define PIN_OUTPUT_PULLDOWN (INPUT_DISABLE | PULL_DOWN)
#define PIN_INPUT (INPUT_EN | PULL_DISABLE)
#define PIN_INPUT_PULLUP (INPUT_EN | PULL_UP)
#define PIN_INPUT_PULLDOWN (INPUT_EN | PULL_DOWN)
#define AM62AX_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62AX_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM62X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM64X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM64X_MCU_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM65X_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define AM65X_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define J721E_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define J721E_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define J721S2_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#define J721S2_WKUP_IOPAD(pa, val, muxmode) (((pa) & 0x1fff)) ((val) | (muxmode))
#endif