setup_usrv.c
/*
* linux/arch/m32r/kernel/setup_usrv.c
*
* Setup routines for MITSUBISHI uServer
*
* Copyright (c) 2001, 2002, 2003 Hiroyuki Kondo, Hirokazu Takata,
* Hitoshi Yamamoto
*/
#include <linux/config.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/system.h>
#include <asm/m32r.h>
#include <asm/io.h>
#define irq2port(x) (M32R_ICU_CR1_PORTL + ((x - 1) * sizeof(unsigned long)))
icu_data_t icu_data[M32700UT_NUM_CPU_IRQ];
static void disable_mappi_irq(unsigned int irq)
{
unsigned long port, data;
port = irq2port(irq);
data = icu_data[irq].icucr|M32R_ICUCR_ILEVEL7;
outl(data, port);
}
static void enable_mappi_irq(unsigned int irq)
{
unsigned long port, data;
port = irq2port(irq);
data = icu_data[irq].icucr|M32R_ICUCR_IEN|M32R_ICUCR_ILEVEL6;
outl(data, port);
}
static void mask_and_ack_mappi(unsigned int irq)
{
disable_mappi_irq(irq);
}
static void end_mappi_irq(unsigned int irq)
{
enable_mappi_irq(irq);
}
static unsigned int startup_mappi_irq(unsigned int irq)
{
enable_mappi_irq(irq);
return 0;
}
static void shutdown_mappi_irq(unsigned int irq)
{
unsigned long port;
port = irq2port(irq);
outl(M32R_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type mappi_irq_type =
{
.typename = "M32700-IRQ",
.startup = startup_mappi_irq,
.shutdown = shutdown_mappi_irq,
.enable = enable_mappi_irq,
.disable = disable_mappi_irq,
.ack = mask_and_ack_mappi,
.end = end_mappi_irq
};
/*
* Interrupt Control Unit of PLD on M32700UT (Level 2)
*/
#define irq2pldirq(x) ((x) - M32700UT_PLD_IRQ_BASE)
#define pldirq2port(x) (unsigned long)((int)PLD_ICUCR1 + \
(((x) - 1) * sizeof(unsigned short)))
typedef struct {
unsigned short icucr; /* ICU Control Register */
} pld_icu_data_t;
static pld_icu_data_t pld_icu_data[M32700UT_NUM_PLD_IRQ];
static void disable_m32700ut_pld_irq(unsigned int irq)
{
unsigned long port, data;
unsigned int pldirq;
pldirq = irq2pldirq(irq);
port = pldirq2port(pldirq);
data = pld_icu_data[pldirq].icucr|PLD_ICUCR_ILEVEL7;
outw(data, port);
}
static void enable_m32700ut_pld_irq(unsigned int irq)
{
unsigned long port, data;
unsigned int pldirq;
pldirq = irq2pldirq(irq);
port = pldirq2port(pldirq);
data = pld_icu_data[pldirq].icucr|PLD_ICUCR_IEN|PLD_ICUCR_ILEVEL6;
outw(data, port);
}
static void mask_and_ack_m32700ut_pld(unsigned int irq)
{
disable_m32700ut_pld_irq(irq);
}
static void end_m32700ut_pld_irq(unsigned int irq)
{
enable_m32700ut_pld_irq(irq);
end_mappi_irq(M32R_IRQ_INT1);
}
static unsigned int startup_m32700ut_pld_irq(unsigned int irq)
{
enable_m32700ut_pld_irq(irq);
return 0;
}
static void shutdown_m32700ut_pld_irq(unsigned int irq)
{
unsigned long port;
unsigned int pldirq;
pldirq = irq2pldirq(irq);
port = pldirq2port(pldirq);
outw(PLD_ICUCR_ILEVEL7, port);
}
static struct hw_interrupt_type m32700ut_pld_irq_type =
{
.typename = "USRV-PLD-IRQ",
.startup = startup_m32700ut_pld_irq,
.shutdown = shutdown_m32700ut_pld_irq,
.enable = enable_m32700ut_pld_irq,
.disable = disable_m32700ut_pld_irq,
.ack = mask_and_ack_m32700ut_pld,
.end = end_m32700ut_pld_irq
};
void __init init_IRQ(void)
{
static int once = 0;
int i;
if (once)
return;
else
once++;
/* MFT2 : system timer */
irq_desc[M32R_IRQ_MFT2].status = IRQ_DISABLED;
irq_desc[M32R_IRQ_MFT2].handler = &mappi_irq_type;
irq_desc[M32R_IRQ_MFT2].action = 0;
irq_desc[M32R_IRQ_MFT2].depth = 1;
icu_data[M32R_IRQ_MFT2].icucr = M32R_ICUCR_IEN;
disable_mappi_irq(M32R_IRQ_MFT2);
#if defined(CONFIG_SERIAL_M32R_SIO)
/* SIO0_R : uart receive data */
irq_desc[M32R_IRQ_SIO0_R].status = IRQ_DISABLED;
irq_desc[M32R_IRQ_SIO0_R].handler = &mappi_irq_type;
irq_desc[M32R_IRQ_SIO0_R].action = 0;
irq_desc[M32R_IRQ_SIO0_R].depth = 1;
icu_data[M32R_IRQ_SIO0_R].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO0_R);
/* SIO0_S : uart send data */
irq_desc[M32R_IRQ_SIO0_S].status = IRQ_DISABLED;
irq_desc[M32R_IRQ_SIO0_S].handler = &mappi_irq_type;
irq_desc[M32R_IRQ_SIO0_S].action = 0;
irq_desc[M32R_IRQ_SIO0_S].depth = 1;
icu_data[M32R_IRQ_SIO0_S].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO0_S);
/* SIO1_R : uart receive data */
irq_desc[M32R_IRQ_SIO1_R].status = IRQ_DISABLED;
irq_desc[M32R_IRQ_SIO1_R].handler = &mappi_irq_type;
irq_desc[M32R_IRQ_SIO1_R].action = 0;
irq_desc[M32R_IRQ_SIO1_R].depth = 1;
icu_data[M32R_IRQ_SIO1_R].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO1_R);
/* SIO1_S : uart send data */
irq_desc[M32R_IRQ_SIO1_S].status = IRQ_DISABLED;
irq_desc[M32R_IRQ_SIO1_S].handler = &mappi_irq_type;
irq_desc[M32R_IRQ_SIO1_S].action = 0;
irq_desc[M32R_IRQ_SIO1_S].depth = 1;
icu_data[M32R_IRQ_SIO1_S].icucr = 0;
disable_mappi_irq(M32R_IRQ_SIO1_S);
#endif /* CONFIG_SERIAL_M32R_SIO */
/* INT#67-#71: CFC#0 IREQ on PLD */
for (i = 0 ; i < CONFIG_CFC_NUM ; i++ ) {
irq_desc[PLD_IRQ_CF0 + i].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_CF0 + i].handler = &m32700ut_pld_irq_type;
irq_desc[PLD_IRQ_CF0 + i].action = 0;
irq_desc[PLD_IRQ_CF0 + i].depth = 1; /* disable nested irq */
pld_icu_data[irq2pldirq(PLD_IRQ_CF0 + i)].icucr
= PLD_ICUCR_ISMOD01; /* 'L' level sense */
disable_m32700ut_pld_irq(PLD_IRQ_CF0 + i);
}
#if defined(CONFIG_SERIAL_8250) || defined(CONFIG_SERIAL_8250_MODULE)
/* INT#76: 16552D#0 IREQ on PLD */
irq_desc[PLD_IRQ_UART0].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_UART0].handler = &m32700ut_pld_irq_type;
irq_desc[PLD_IRQ_UART0].action = 0;
irq_desc[PLD_IRQ_UART0].depth = 1; /* disable nested irq */
pld_icu_data[irq2pldirq(PLD_IRQ_UART0)].icucr
= PLD_ICUCR_ISMOD03; /* 'H' level sense */
disable_m32700ut_pld_irq(PLD_IRQ_UART0);
/* INT#77: 16552D#1 IREQ on PLD */
irq_desc[PLD_IRQ_UART1].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_UART1].handler = &m32700ut_pld_irq_type;
irq_desc[PLD_IRQ_UART1].action = 0;
irq_desc[PLD_IRQ_UART1].depth = 1; /* disable nested irq */
pld_icu_data[irq2pldirq(PLD_IRQ_UART1)].icucr
= PLD_ICUCR_ISMOD03; /* 'H' level sense */
disable_m32700ut_pld_irq(PLD_IRQ_UART1);
#endif /* CONFIG_SERIAL_8250 || CONFIG_SERIAL_8250_MODULE */
#if defined(CONFIG_IDC_AK4524) || defined(CONFIG_IDC_AK4524_MODULE)
/* INT#80: AK4524 IREQ on PLD */
irq_desc[PLD_IRQ_SNDINT].status = IRQ_DISABLED;
irq_desc[PLD_IRQ_SNDINT].handler = &m32700ut_pld_irq_type;
irq_desc[PLD_IRQ_SNDINT].action = 0;
irq_desc[PLD_IRQ_SNDINT].depth = 1; /* disable nested irq */
pld_icu_data[irq2pldirq(PLD_IRQ_SNDINT)].icucr
= PLD_ICUCR_ISMOD01; /* 'L' level sense */
disable_m32700ut_pld_irq(PLD_IRQ_SNDINT);
#endif /* CONFIG_IDC_AK4524 || CONFIG_IDC_AK4524_MODULE */
/*
* INT1# is used for UART, MMC, CF Controller in FPGA.
* We enable it here.
*/
icu_data[M32R_IRQ_INT1].icucr = M32R_ICUCR_ISMOD11;
enable_mappi_irq(M32R_IRQ_INT1);
}