Raw File
RTB_OP_CODES.agc
### FILE="Main.annotation"
## Copyright:   Public domain.
## Filename:    RTB_OP_CODES.agc
## Purpose:     A section of Luminary revision 210.
##              It is part of the source code for the Lunar Module's (LM)
##              Apollo Guidance Computer (AGC) for Apollo 15-17.
##              This file is intended to be a faithful transcription, except
##              that the code format has been changed to conform to the
##              requirements of the yaYUL assembler rather than the
##              original YUL assembler.
## Reference:   pp. 1394-1399
## Assembler:   yaYUL
## Contact:     Ron Burkey <info@sandroid.org>.
## Website:     www.ibiblio.org/apollo/index.html
## Mod history: 2016-11-17 JL   Created from Luminary131 version.
##		2016-12-06 RRB	Updated from Luminary210 scans.
##              2016-12-09 HG   Add missing SETLOC RTBCODES (changes to Bank 10, because Bank 14 is full)
##		2016-12-26 RSB	Comment-text proofed using ProoferComments
##				and corrected errors found.

## Page 1394
		BANK	22
		SETLOC	RTBCODES
		BANK

		EBANK=	XNB
		COUNT*	$$/RTB

# 	LOAD TIME2, TIME1 INTO MPAC:

LOADTIME	EXTEND
		DCA	TIME2
		TCF	SLOAD2

# 	CONVERT THE SINGLE PRECISION 2'S COMPLEMENT NUMBER ARRIVING IN MPAC (SCALED IN HALF-REVOLUTIONS) TO A
# DP 1'S COMPLEMENT NUMBER SCALED IN REVOLUTIONS.

CDULOGIC	CCS	MPAC
		CAF	ZERO
		TCF	+3
		NOOP
		CS	HALF

		TS	MPAC +1
		CAF	ZERO
		XCH	MPAC
		EXTEND
		MP	HALF
		DAS	MPAC
		TCF	DANZIG		# MODE IS ALREADY AT DOUBLE-PRECISION

# 	FORCE TP SIGN AGREEMENT IN MPAC:

SGNAGREE	TC	TPAGREE
		TCF	DANZIG

# 	CONVERT THE DP 1'S COMPLEMENT ANGLE SCALED IN REVOLUTIONS TO A SINGLE PRECISION 2'S COMPLEMENT ANGLE
# SCALED IN HALF-REVOLUTIONS.

1STO2S		TC	1TO2SUB
		CAF	ZERO
		TS	MPAC +1
		TCF	NEWMODE

# 	DO 1STO2S ON A VECTOR OF ANGLES:

V1STO2S		TC	1TO2SUB		# ANSWER ARRIVES IN A AND MPAC.

		DXCH	MPAC +5
		DXCH	MPAC
		TC	1TO2SUB
## Page 1395
		TS	MPAC +2

		DXCH	MPAC +3
		DXCH	MPAC
		TC	1TO2SUB
		TS	MPAC +1

		CA	MPAC +5
		TS	MPAC

TPMODE		CAF	ONE		# MODE IS TP.
		TCF	NEWMODE

# 	V1STO2S FOR 2 COMPONENT VECTOR. USED BY RR.

2V1STO2S	TC	1TO2SUB
		DXCH	MPAC +3
		DXCH	MPAC
		TC	1TO2SUB
		TS	L
		CA	MPAC +3
		TCF	SLOAD2

# 	SUBROUTINE TO DO DOUBLING AND 1'S TO 2'S CONVERSION:

1TO2SUB		DXCH	MPAC		# FINAL MPAC +1 UNSPECIFIED.
		DDOUBL
		CCS	A
		AD	ONE
		TCF	+2
		COM			# THIS WAS REVERSE OF MSU.

		TS	MPAC		# AND SKIP ON OVERFLOW.
		TC	Q

		INDEX	A		# OVERFLOW UNCORRECT AND IN MSU.
		CAF	LIMITS
		ADS	MPAC
		TC	Q

# 	THE FOLLOWING ROUTINE INCREMENTS IN 2S COMPLEMENT THE REGISTER WHOSE ADDRESS IS IN BUF BY THE 1S COMPL.
# QUANTITY FOUND IN TEM2.  THIS MAY BE USED TO INCREMENT DESIRED IMU AND OPTICS CDU ANGLES OR ANY OTHER 2S COMPL.
# (+0 UNEQUAL TO -0) QUANTITY.  MAY BE CALLED BY BANKCALL/SWCALL.

CDUINC		TS	TEM2		# 1S COMPL.QUANT. ARRIVES IN ACC.  STORE IT
		INDEX	BUF
		CCS	0		# CHANGE 2S COMPL. ANGLE(IN BUF)INTO 1S
		AD	ONE
		TCF	+4
		AD	ONE
## Page 1396
		AD	ONE		# OVERFLOW HERE IF 2S COMPL. IS 180 DEG.
		COM

		AD	TEM2		# SULT MOVES FROM 2ND TO 3D QUAD. (OR BACK)
		CCS	A		# BACK TO 2S COMPL.
		AD	ONE
		TCF	+2
		COM
		TS	TEM2		# STORE 14BIT QUANTITY WITH PRESENT SIGN
		TCF	+4
		INDEX	A		#  SIGN.
		CAF	LIMITS		# FIX IT, BY ADDING IN 37777 OR 40000
		AD	TEM2

		INDEX	BUF
		TS	0		# STORE NEW ANGLE IN 2S COMPLEMENT.
		TC	Q

## Page 1397
# 	RTB TO TORQUE GYROS, EXCEPT FOR THE CALL TO IMUSTALL.  ECADR OF COMMANDS ARRIVES IN X1.

PULSEIMU	INDEX	FIXLOC		# ADDRESS OF GYRO COMMANDS SHOULD BE IN X1
		CA	X1
		TC	BANKCALL
		CADR	IMUPULSE
		TCF	DANZIG

## Page 1398
# 	THE SUBROUTINE SIGNMPAC SETS C(MPAC, MPAC +1) TO SIGN(MPAC).
# FOR THIS, ONLY THE CONTENTS OF MPAC ARE EXAMINED.  ALSO +0 YIELDS POSMAX AND -0 YIELDS NEGMAX.
#
# ENTRY MAY BE BY EITHER OF THE FOLLOWING:
# 1.	LIMIT THE SIZE OF MPAC ON INTERPRETIVE OVERFLOW:
# ENTRY:	BOVB
#			SIGNMPAC
# 2.	GENERATE IN MPAC THE SIGNUM FUNCTION OF MPAC:
# ENTRY:	RTB
#				SIGNMPAC
# IN EITHER CASE, RETURN IS TO  THE NEXT INTERPRETIVE INSTRUCTION IN THE CALLING SEQUENCE.

		SETLOC	RTBCODE1
		BANK

SIGNMPAC	EXTEND
		DCA	DPOSMAX
		DXCH	MPAC
		CCS	A
DPMODE		CAF	ZERO		# SETS MPAC +2 TO ZERO IN THE PROCESS
		TCF	SLOAD2 +2
		TCF	+1
		EXTEND
		DCS	DPOSMAX
		TCF	SLOAD2
                
                SETLOC  RTBCODES
                BANK

# 	RTB OP CODE NORMUNIT IS LIKE INTERPRETIVE INSTRUCTION UNIT, EXCEPT THAT IT CAN BE DEPENDED ON NOT TO BLOW
# UP WHEN THE VECTOR BEING UNITIZED IS VERY SMALL -- IT WILL BLOW UP WHEN ALL COMPONENTS ARE ZERO.  IF NORMUNIT
# IS USED AND THE UPPER ORDER HALVES OF ALL COMPONENTS ARE ZERO, THE MAGNITUDE RETURNED IN 36D WILL BE TOO LARGE
# BY A FACTOR OF 2(13) AND THE SQUARED MAGNITUDE RETURNED AT 34D WILL BE TOO BIG BY A FACTOR OF 2(26).

NORMUNX1	CAF	ONE
		TCF	NORMUNIT +1
NORMUNIT	CAF	ZERO
		AD	FIXLOC
		TS	MPAC +2
		TC	BANKCALL	# GET SIGN AGREEMENT IN ALL COMPONENTS
		CADR	VECAGREE
		CCS	MPAC
		TCF	NOSHIFT
		TCF	+2
		TCF	NOSHIFT
		CCS	MPAC +3
		TCF	NOSHIFT
## Page 1399
		TCF	+2
		TCF	NOSHIFT
		CCS	MPAC +5
		TCF	NOSHIFT
		TCF	+2
		TCF	NOSHIFT
		CA	MPAC +1		# SHIFT ALL COMPONENTS LEFT 13
		EXTEND
		MP	BIT14
		DAS	MPAC		# DAS GAINS A LITTLE ACCURACY
		CA	MPAC +4
		EXTEND
		MP	BIT14
		DAS	MPAC +3
		CA	MPAC +6
		EXTEND
		MP	BIT14
		DAS	MPAC +5
		CAF	THIRTEEN
		INDEX	MPAC +2
		TS	37D
OFFTUNIT	TC	POSTJUMP
		CADR	UNIT +1		# SKIP THE "TC VECAGREE" DONE AT UNIT

NOSHIFT		CAF	ZERO
		TCF	OFFTUNIT -2

# RTB VECSGNAG ... FORCES SIGN AGREEMENT OF VECTOR IN MPAC.

VECSGNAG	TC	BANKCALL
		CADR	VECAGREE
		TC	DANZIG

back to top