sa1100_h3600.c
/*
* drivers/pcmcia/sa1100_h3600.c
*
* PCMCIA implementation routines for H3600
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/h3600.h>
#include "sa1100_generic.h"
static struct pcmcia_irqs irqs[] = {
{ 0, IRQ_GPIO_H3600_PCMCIA_CD0, "PCMCIA CD0" },
{ 1, IRQ_GPIO_H3600_PCMCIA_CD1, "PCMCIA CD1" }
};
static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
skt->irq = skt->nr ? IRQ_GPIO_H3600_PCMCIA_IRQ1
: IRQ_GPIO_H3600_PCMCIA_IRQ0;
return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
/* Disable CF bus: */
clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
}
static void
h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
unsigned long levels = GPLR;
switch (skt->nr) {
case 0:
state->detect = levels & GPIO_H3600_PCMCIA_CD0 ? 0 : 1;
state->ready = levels & GPIO_H3600_PCMCIA_IRQ0 ? 1 : 0;
state->bvd1 = 0;
state->bvd2 = 0;
state->wrprot = 0; /* Not available on H3600. */
state->vs_3v = 0;
state->vs_Xv = 0;
break;
case 1:
state->detect = levels & GPIO_H3600_PCMCIA_CD1 ? 0 : 1;
state->ready = levels & GPIO_H3600_PCMCIA_IRQ1 ? 1 : 0;
state->bvd1 = 0;
state->bvd2 = 0;
state->wrprot = 0; /* Not available on H3600. */
state->vs_3v = 0;
state->vs_Xv = 0;
break;
}
}
static int
h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
if (state->Vcc != 0 && state->Vcc != 33 && state->Vcc != 50) {
printk(KERN_ERR "h3600_pcmcia: unrecognized Vcc %u.%uV\n",
state->Vcc / 10, state->Vcc % 10);
return -1;
}
if (state->flags & SS_RESET)
set_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
else
clr_h3600_egpio(IPAQ_EGPIO_CARD_RESET);
/* Silently ignore Vpp, output enable, speaker enable. */
return 0;
}
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
/* Enable CF bus: */
set_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
set_h3600_egpio(IPAQ_EGPIO_OPT_ON);
clr_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
msleep(10);
soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
}
static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
/*
* FIXME: This doesn't fit well. We don't have the mechanism in
* the generic PCMCIA layer to deal with the idea of two sockets
* on one bus. We rely on the cs.c behaviour shutting down
* socket 0 then socket 1.
*/
if (skt->nr == 1) {
clr_h3600_egpio(IPAQ_EGPIO_OPT_ON);
clr_h3600_egpio(IPAQ_EGPIO_OPT_NVRAM_ON);
/* hmm, does this suck power? */
set_h3600_egpio(IPAQ_EGPIO_OPT_RESET);
}
}
struct pcmcia_low_level h3600_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = h3600_pcmcia_hw_init,
.hw_shutdown = h3600_pcmcia_hw_shutdown,
.socket_state = h3600_pcmcia_socket_state,
.configure_socket = h3600_pcmcia_configure_socket,
.socket_init = h3600_pcmcia_socket_init,
.socket_suspend = h3600_pcmcia_socket_suspend,
};
int __init pcmcia_h3600_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_h3600())
ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
return ret;
}