# Copyright (c) 2018, ETH Zurich and UNC Chapel Hill.
# All rights reserved.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
#     * Redistributions of source code must retain the above copyright
#       notice, this list of conditions and the following disclaimer.
#
#     * Redistributions in binary form must reproduce the above copyright
#       notice, this list of conditions and the following disclaimer in the
#       documentation and/or other materials provided with the distribution.
#
#     * Neither the name of ETH Zurich and UNC Chapel Hill nor the names of
#       its contributors may be used to endorse or promote products derived
#       from this software without specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#
# Author: Johannes L. Schoenberger (jsch at inf.ethz.ch)

import os
import sys
import collections
import numpy as np
import struct


CameraModel = collections.namedtuple(
    "CameraModel", ["model_id", "model_name", "num_params"])
Camera = collections.namedtuple(
    "Camera", ["id", "model", "width", "height", "params"])
BaseImage = collections.namedtuple(
    "Image", ["id", "qvec", "tvec", "camera_id", "name", "xys", "point3D_ids"])
Point3D = collections.namedtuple(
    "Point3D", ["id", "xyz", "rgb", "error", "image_ids", "point2D_idxs"])

class Image(BaseImage):
    def qvec2rotmat(self):
        return qvec2rotmat(self.qvec)


CAMERA_MODELS = {
    CameraModel(model_id=0, model_name="SIMPLE_PINHOLE", num_params=3),
    CameraModel(model_id=1, model_name="PINHOLE", num_params=4),
    CameraModel(model_id=2, model_name="SIMPLE_RADIAL", num_params=4),
    CameraModel(model_id=3, model_name="RADIAL", num_params=5),
    CameraModel(model_id=4, model_name="OPENCV", num_params=8),
    CameraModel(model_id=5, model_name="OPENCV_FISHEYE", num_params=8),
    CameraModel(model_id=6, model_name="FULL_OPENCV", num_params=12),
    CameraModel(model_id=7, model_name="FOV", num_params=5),
    CameraModel(model_id=8, model_name="SIMPLE_RADIAL_FISHEYE", num_params=4),
    CameraModel(model_id=9, model_name="RADIAL_FISHEYE", num_params=5),
    CameraModel(model_id=10, model_name="THIN_PRISM_FISHEYE", num_params=12)
}
CAMERA_MODEL_IDS = dict([(camera_model.model_id, camera_model) \
                         for camera_model in CAMERA_MODELS])


def read_next_bytes(fid, num_bytes, format_char_sequence, endian_character="<"):
    """Read and unpack the next bytes from a binary file.
    :param fid:
    :param num_bytes: Sum of combination of {2, 4, 8}, e.g. 2, 6, 16, 30, etc.
    :param format_char_sequence: List of {c, e, f, d, h, H, i, I, l, L, q, Q}.
    :param endian_character: Any of {@, =, <, >, !}
    :return: Tuple of read and unpacked values.
    """
    data = fid.read(num_bytes)
    return struct.unpack(endian_character + format_char_sequence, data)


def read_cameras_text(path):
    """
    see: src/base/reconstruction.cc
        void Reconstruction::WriteCamerasText(const std::string& path)
        void Reconstruction::ReadCamerasText(const std::string& path)
    """
    cameras = {}
    with open(path, "r") as fid:
        while True:
            line = fid.readline()
            if not line:
                break
            line = line.strip()
            if len(line) > 0 and line[0] != "#":
                elems = line.split()
                camera_id = int(elems[0])
                model = elems[1]
                width = int(elems[2])
                height = int(elems[3])
                params = np.array(tuple(map(float, elems[4:])))
                cameras[camera_id] = Camera(id=camera_id, model=model,
                                            width=width, height=height,
                                            params=params)
    return cameras


def read_cameras_binary(path_to_model_file):
    """
    see: src/base/reconstruction.cc
        void Reconstruction::WriteCamerasBinary(const std::string& path)
        void Reconstruction::ReadCamerasBinary(const std::string& path)
    """
    cameras = {}
    with open(path_to_model_file, "rb") as fid:
        num_cameras = read_next_bytes(fid, 8, "Q")[0]
        for camera_line_index in range(num_cameras):
            camera_properties = read_next_bytes(
                fid, num_bytes=24, format_char_sequence="iiQQ")
            camera_id = camera_properties[0]
            model_id = camera_properties[1]
            model_name = CAMERA_MODEL_IDS[camera_properties[1]].model_name
            width = camera_properties[2]
            height = camera_properties[3]
            num_params = CAMERA_MODEL_IDS[model_id].num_params
            params = read_next_bytes(fid, num_bytes=8*num_params,
                                     format_char_sequence="d"*num_params)
            cameras[camera_id] = Camera(id=camera_id,
                                        model=model_name,
                                        width=width,
                                        height=height,
                                        params=np.array(params))
        assert len(cameras) == num_cameras
    return cameras


def read_images_text(path):
    """
    see: src/base/reconstruction.cc
        void Reconstruction::ReadImagesText(const std::string& path)
        void Reconstruction::WriteImagesText(const std::string& path)
    """
    images = {}
    with open(path, "r") as fid:
        while True:
            line = fid.readline()
            if not line:
                break
            line = line.strip()
            if len(line) > 0 and line[0] != "#":
                elems = line.split()
                image_id = int(elems[0])
                qvec = np.array(tuple(map(float, elems[1:5])))
                tvec = np.array(tuple(map(float, elems[5:8])))
                camera_id = int(elems[8])
                image_name = elems[9]
                elems = fid.readline().split()
                xys = np.column_stack([tuple(map(float, elems[0::3])),
                                       tuple(map(float, elems[1::3]))])
                point3D_ids = np.array(tuple(map(int, elems[2::3])))
                images[image_id] = Image(
                    id=image_id, qvec=qvec, tvec=tvec,
                    camera_id=camera_id, name=image_name,
                    xys=xys, point3D_ids=point3D_ids)
    return images


def read_images_binary(path_to_model_file):
    """
    see: src/base/reconstruction.cc
        void Reconstruction::ReadImagesBinary(const std::string& path)
        void Reconstruction::WriteImagesBinary(const std::string& path)
    """
    images = {}
    with open(path_to_model_file, "rb") as fid:
        num_reg_images = read_next_bytes(fid, 8, "Q")[0]
        for image_index in range(num_reg_images):
            binary_image_properties = read_next_bytes(
                fid, num_bytes=64, format_char_sequence="idddddddi")
            image_id = binary_image_properties[0]
            qvec = np.array(binary_image_properties[1:5])
            tvec = np.array(binary_image_properties[5:8])
            camera_id = binary_image_properties[8]
            image_name = ""
            current_char = read_next_bytes(fid, 1, "c")[0]
            while current_char != b"\x00":   # look for the ASCII 0 entry
                image_name += current_char.decode("utf-8")
                current_char = read_next_bytes(fid, 1, "c")[0]
            num_points2D = read_next_bytes(fid, num_bytes=8,
                                           format_char_sequence="Q")[0]
            x_y_id_s = read_next_bytes(fid, num_bytes=24*num_points2D,
                                       format_char_sequence="ddq"*num_points2D)
            xys = np.column_stack([tuple(map(float, x_y_id_s[0::3])),
                                   tuple(map(float, x_y_id_s[1::3]))])
            point3D_ids = np.array(tuple(map(int, x_y_id_s[2::3])))
            images[image_id] = Image(
                id=image_id, qvec=qvec, tvec=tvec,
                camera_id=camera_id, name=image_name,
                xys=xys, point3D_ids=point3D_ids)
    return images


def read_points3D_text(path):
    """
    see: src/base/reconstruction.cc
        void Reconstruction::ReadPoints3DText(const std::string& path)
        void Reconstruction::WritePoints3DText(const std::string& path)
    """
    points3D = {}
    with open(path, "r") as fid:
        while True:
            line = fid.readline()
            if not line:
                break
            line = line.strip()
            if len(line) > 0 and line[0] != "#":
                elems = line.split()
                point3D_id = int(elems[0])
                xyz = np.array(tuple(map(float, elems[1:4])))
                rgb = np.array(tuple(map(int, elems[4:7])))
                error = float(elems[7])
                image_ids = np.array(tuple(map(int, elems[8::2])))
                point2D_idxs = np.array(tuple(map(int, elems[9::2])))
                points3D[point3D_id] = Point3D(id=point3D_id, xyz=xyz, rgb=rgb,
                                               error=error, image_ids=image_ids,
                                               point2D_idxs=point2D_idxs)
    return points3D


def read_points3d_binary(path_to_model_file):
    """
    see: src/base/reconstruction.cc
        void Reconstruction::ReadPoints3DBinary(const std::string& path)
        void Reconstruction::WritePoints3DBinary(const std::string& path)
    """
    points3D = {}
    with open(path_to_model_file, "rb") as fid:
        num_points = read_next_bytes(fid, 8, "Q")[0]
        for point_line_index in range(num_points):
            binary_point_line_properties = read_next_bytes(
                fid, num_bytes=43, format_char_sequence="QdddBBBd")
            point3D_id = binary_point_line_properties[0]
            xyz = np.array(binary_point_line_properties[1:4])
            rgb = np.array(binary_point_line_properties[4:7])
            error = np.array(binary_point_line_properties[7])
            track_length = read_next_bytes(
                fid, num_bytes=8, format_char_sequence="Q")[0]
            track_elems = read_next_bytes(
                fid, num_bytes=8*track_length,
                format_char_sequence="ii"*track_length)
            image_ids = np.array(tuple(map(int, track_elems[0::2])))
            point2D_idxs = np.array(tuple(map(int, track_elems[1::2])))
            points3D[point3D_id] = Point3D(
                id=point3D_id, xyz=xyz, rgb=rgb,
                error=error, image_ids=image_ids,
                point2D_idxs=point2D_idxs)
    return points3D


def read_model(path, ext):
    if ext == ".txt":
        cameras = read_cameras_text(os.path.join(path, "cameras" + ext))
        images = read_images_text(os.path.join(path, "images" + ext))
        points3D = read_points3D_text(os.path.join(path, "points3D") + ext)
    else:
        cameras = read_cameras_binary(os.path.join(path, "cameras" + ext))
        images = read_images_binary(os.path.join(path, "images" + ext))
        points3D = read_points3d_binary(os.path.join(path, "points3D") + ext)
    return cameras, images, points3D


def qvec2rotmat(qvec):
    return np.array([
        [1 - 2 * qvec[2]**2 - 2 * qvec[3]**2,
         2 * qvec[1] * qvec[2] - 2 * qvec[0] * qvec[3],
         2 * qvec[3] * qvec[1] + 2 * qvec[0] * qvec[2]],
        [2 * qvec[1] * qvec[2] + 2 * qvec[0] * qvec[3],
         1 - 2 * qvec[1]**2 - 2 * qvec[3]**2,
         2 * qvec[2] * qvec[3] - 2 * qvec[0] * qvec[1]],
        [2 * qvec[3] * qvec[1] - 2 * qvec[0] * qvec[2],
         2 * qvec[2] * qvec[3] + 2 * qvec[0] * qvec[1],
         1 - 2 * qvec[1]**2 - 2 * qvec[2]**2]])


def rotmat2qvec(R):
    Rxx, Ryx, Rzx, Rxy, Ryy, Rzy, Rxz, Ryz, Rzz = R.flat
    K = np.array([
        [Rxx - Ryy - Rzz, 0, 0, 0],
        [Ryx + Rxy, Ryy - Rxx - Rzz, 0, 0],
        [Rzx + Rxz, Rzy + Ryz, Rzz - Rxx - Ryy, 0],
        [Ryz - Rzy, Rzx - Rxz, Rxy - Ryx, Rxx + Ryy + Rzz]]) / 3.0
    eigvals, eigvecs = np.linalg.eigh(K)
    qvec = eigvecs[[3, 0, 1, 2], np.argmax(eigvals)]
    if qvec[0] < 0:
        qvec *= -1
    return