RESTART_TABLES.agc
### FILE="Main.annotation"
## Copyright: Public domain.
## Filename: RESTART_TABLES.agc
## Purpose: The main source file for Luminary revision 069.
## It is part of the source code for the original release
## of the flight software for the Lunar Module's (LM) Apollo
## Guidance Computer (AGC) for Apollo 10. The actual flown
## version was Luminary 69 revision 2, which included a
## newer lunar gravity model and only affected module 2.
## This file is intended to be a faithful transcription, except
## that the code format has been changed to conform to the
## requirements of the yaYUL assembler rather than the
## original YUL assembler.
## Reference: pp. 253-258
## Assembler: yaYUL
## Contact: Ron Burkey <info@sandroid.org>.
## Website: www.ibiblio.org/apollo/index.html
## Mod history: 2016-12-13 MAS Created from Luminary 99.
## 2017-01-09 HG Transcribed
## 2017-01-25 RSB Proofed comment text using octopus/prooferComments
## but no errors found.
## Page 253
# RESTART TABLES
# ------------------
# THERE ARE TWO FORMS OF RESTART TABLES FOR EACH GROUP. THEY ARE KNOWN AS THE EVEN RESTART TABLES AND THE ODD
# RESTART TABLES. THE ODD TABLES HAVE ONLY ONE ENTRY OF THREE LOCATIONS WHILE THE EVEN TABLES HAVE TWO ENTRIES
# EACH USING THREE LOCATIONS. THE INFORMATION AS TO WHETHER IT IS A JOB, WAITLIST, OR A LONGCALL IS GIVEN BY THE
# WAY THINGS ARE PUT INTO THE TABLES.
# A JOB HAS ITS PRIORITY STORED IN PRDTTAB OF THE CORRECT PHASE SPOT - A POSITIVE PRIORITY INDICATES A
# FINDVAC JOB, A NEGATIVE PRIORITY A NOVAC. THE 2CADR OF THE JOB IS STORED IN THE CADRTAB.
# FOR EXAMPLE,
# 5.7SPOT OCT 23000
# 2CADR SOMEJOB
# A RESTART OF GROUP 5 WITH PHASE SEVEN WOULD THEN CAUSE SOMEJOB TO BE RESTARTED AS A FINDVAC WITH PRIORITY 23.
# 5.5SPOT OCT -23000
# 2CADR ANYJOB
# HERE A RESTART OF GROUP 5 WITH PHASE 7 WOULD CAUSE ANYJOB TO BE RESTARTED AS A NOVAC WITH PRIORITY 23.
# A LONGCALL HAS ITS GENADR OF ITS 2CADR STORED NEGATIVELY AND ITS BBCON STORED POSITIVELY. IN ITS PRDTTAB IS
# PLACED THE LOCATION OF A DP REGISTER THAT CONTAINS THE DELTA TIME THAT LONGCALL HAD BEEN ORIGINALLY STARTED
# WITH. EXAMPLE,
# 3.6SPOT GENADR DELTAT
# -GENADR LONGTASK
# BBCON LONGTASK
# OCT 31000
# 2CADR JOBAGAIN
# THIS WOULD START UP LONGTASK AT THE APPROPRIATE TIME, OR IMMEDIATELY IF THE TIME HAD ALREADY PASSED. IT SHOULD
# BE NOTED THAT IF DELTAT IS IN A SWITCHED E BANK, THIS INFORMATOIN SHOULD BE IN THE BBCON OFTHE 2CADR OF THE
# TASK. FROM ABOVE, WE SEE THAT THE SECOND PART OF THIS PHASE WOULD BE STARTED AS A JOB WITH A PRIORITY OF 31.
# WAITLIST CALLS ARE IDENTIFIED BY THE FACT THAT THEIR 2CADR IS STORED NEGATIVELY. IF PRDTTAB OF THE PHASE SPOT
# IS POSITIVE, THEN IT CONTAINS THE DELTA TIME, IF PRDTTAB IS NEGATIVE THEN IT IS THE -GENADR OF AN ERASABLE
# LOCATION CONTAINING THE DELTA TIME, THAT IS, THE TIME IS STORED INDIRECTLY. IT SHOULD BE NOTED AS ABOVE, THAT
# IF THE TIME IS STORED INDIRECTLY, THE BBCON MUST CONTAIN THE NECESSARY E BANK INFORMATION IF APPLICABLE. WITH
# WAITLIST WE HAVE ONE FURTHER OPTION, IF -0 IS STORED IN PRDTTAB, IT WILL CAUSE AN IMMEDIATE RESTART OF THE
# TASK. EXAMPLES,
#
# OCT 77777 THIS WILL CAUSE AN IMMEDIATE RESTART
# -2CADR ATASK OF THE TASK :ATASK:
# DEC 200 IF THE TIME OF THE 2 SECONDS SINCE DUMMY
# -2CADR DUMMY WAS PUT ON WAITLIST IS UP, IT WILL BEGIN
# IN 10 MS, OTHERWISE IT WILL BEGIN WHEN
# IT NORMALLY WOULD HAVE BEGUN.
## Page 254
# -GENADR DTIME WHERE DTIME CONTAINS THE DELTA TIME
# -2CADR TASKTASK OTHERWISE THIS IS AS ABOVE
# ***** NOW THE TABLES THEMSELVES *****
BANK 01
SETLOC RESTART
BANK
PRDTTAB EQUALS 12000 # USED TO FIND THE PRIORITY OR DELTATIME
CADRTAB EQUALS 12001 # THIS AND THE NEXT RELATIVE LOC CONTAIN
# RESTART 2CADR
COUNT* $$/RSTAB # TABLES IN BANK 1.
SIZETAB TC 1.2SPOT -12006
TC 1.3SPOT -12004
TC 2.2SPOT -12006
TC 2.3SPOT -12004
TC 3.2SPOT -12006
TC 3.3SPOT -12004
TC 4.2SPOT -12006
TC 4.3SPOT -12004
TC 5.2SPOT -12006
TC 5.3SPOT -12004
TC 6.2SPOT -12006
TC 6.3SPOT -12004
1.2SPOT OCT 21000 # A DUMMY EXAMPLE TO BE REPLACED AS SOON
EBANK= STATE
2CADR ENDOFJOB # AS THERE IS A LEGITIMATE 1.2SPOT
DEC 100
EBANK= STATE
2CADR TASKOVER
# ANY MORE GROUP 1.EVEN RESTART VALUES SHOULD GO HERE
1.3SPOT -GENADR SAVET-30
EBANK= DVCNTR
-2CADR ULLGTASK
# ANY MORE GROUP 1.ODD RESTART VALUES SHOULD GO HERE
2.2SPOT EQUALS 1.2SPOT
# ANY MORE GROUP 2.EVEN RESTART VALUES SHOULD GO HERE
2.3SPOT GENADR 600SECS
-GENADR STATEINT
EBANK= RRECTCSM
BBCON STATEINT
## Page 255
2.5SPOT OCT 05000
EBANK= RRECTCSM
2CADR STATINT1
2.7SPOT DEC 1500
EBANK= LOSCOUNT
-2CADR P20LEMC1
2.11SPOT OCT 14000
EBANK= P21TIME
2CADR P25LEM1
2.13SPOT OCT 10000
EBANK= LOSCOUNT
2CADR RELINUS
2.15SPOT OCT 26000
EBANK= LOSCOUNT
2CADR R22RSTRT
2.17SPOT OCT 77777
EBANK= VGPREV
-2CADR REDO2.17
2.21SPOT DEC 25
EBANK= DVCNTR
-2CADR R10,R11
# ANY MORE GROUP 2.ODD RESTART VALUES SHOULD GO HERE.
3.2SPOT EQUALS 1.2SPOT
# ANY MORE GROUP 3.EVEN RESTART VALUES SHOULD GO HERE
3.3SPOT -GENADR ZOOMTIME
EBANK= DVCNTR
-2CADR ZOOM
# ANY MORE GROUP 3.ODD RESTART VALUES SHOULD GO HERE
4.2SPOT DEC 2500
EBANK= TTOGO
-2CADR TIG-5
OCT 77777
EBANK= TTOGO
-2CADR REDO4.2
# ANY MORE GROUP 4.EVEN RESTART VALUES SHOULD GO HERE
## Page 256
4.3SPOT OCT 25000
EBANK= DVCNTR
2CADR GOABORT
4.5SPOT DEC 50
EBANK= TTOGO
-2CADR ULLAGOFF
4.7SPOT DEC 500
EBANK= DVCNTR
-2CADR TIG-0
4.11SPOT -GENADR TGO +1
EBANK= DVCNTR
-2CADR ENGOFTSK
4.13SPOT OCT 12000
EBANK= TRKMKCNT
2CADR POSTBURN
4.15SPOT DEC 500
EBANK= TTOGO
-2CADR TIG-30
4.17SPOT OCT 77777
EBANK= DVCNTR
-2CADR TIG-5
4.21SPOT OCT 13000
EBANK= STAR
2CADR R51.1 +1
4.23SPOT OCT 77777
EBANK= DVCNTR
-2CADR IGNITION
4.25SPOT GENADR SAVET-30
-GENADR TIG-35
EBANK= SAVET-30
BBCON TIG-35
4.27SPOT OCT 52777
EBANK= DVCNTR
2CADR P70A
4.31SPOT OCT 52777
EBANK= DVCNTR
2CADR P71A
## Page 257
4.33SPOT OCT 46777
EBANK= DVCNTR
2CADR GOPOOFIX
4.35SPOT OCT 46777
EBANK= DVCNTR
2CADR GOPOODOO
4.37SPOT OCT 52777
EBANK= WHICH
2CADR COMFAIL
# ANY MORE 4.ODD RESTART VALUES SHOULD GO HERE.
5.2SPOT OCT 22000
EBANK= DVCNTR
2CADR NORMLIZE
DEC 200
EBANK= DVCNTR
-2CADR REREADAC
5.4SPOT DEC 200
EBANK= DVCNTR
-2CADR REREADAC
OCT 20000
EBANK= DVCNTR
2CADR SERVICER
# ANY MORE GROUP 5.EVEN RESTART VALUES SHOULD GO HERE
5.3SPOT DEC 200
EBANK= DVCNTR
-2CADR REREADAC
5.5SPOT OCT 77777
EBANK= DVCNTR
-2CADR REDO5.5
5.7SPOT OCT 77777
EBANK= DVCNTR
-2CADR BIBIBIAS
# ANY MORE GROUP 5.ODD RESTART VALUES SHOULD GO HERE
## Page 258
6.2SPOT EQUALS 1.2SPOT
6.3SPOT DEC 100
EBANK= TIG
-2CADR CLOKTASK
6.5SPOT OCT 30000 # PROTECT INCREMENTING OF TIME2,TIME1 BY
EBANK= TEPHEM # P27(UPDATE PROGRAM) VIA V70 OR V73.
2CADR TIMEDIDR
6.7SPOT OCT 17000
EBANK= VGPREV
2CADR REDO6.7
