To reference or cite the objects present in the Software Heritage archive, permalinks based on SoftWare Heritage persistent IDentifiers (SWHIDs) must be used instead of copying and pasting the url from the address bar of the browser (as there is no guarantee the current URI scheme will remain the same over time).
Select below a type of object currently browsed in order to display its associated SWHID and permalink.
# Cookbook 6: Pseudo-Free-Surface Formulation [CitcomS] steps = 100 [CitcomS.controller] monitoringFrequency = 10 [CitcomS.solver] datafile = cookbook6 rayleigh = 4.312616e+08 [CitcomS.solver.mesher] nprocx = 4 nprocy = 4 nprocz = 2 nodex = 61 nodey = 61 nodez = 25 coor = true coor_file = ./coord.dat [CitcomS.solver.tsolver] fixed_timestep = 7.77e-10 [CitcomS.solver.vsolver] precond = on accuracy = 1e-10 tole_compressibility = 1e-06 mg_cycle = 1 down_heavy = 5 up_heavy = 5 vlowstep = 100000 vhighstep = 3 piterations = 100000 [CitcomS.solver.ic] # To try a different hot blob, one can specify three parameters: # 1. blob_center: Coordinates(theta,fi,r) of the center. # 2. blob_radius: Radius as non-dimensional distance. # 3. blob_dT: The amount of temperature increase/decrease # within the blob as non-dimensional temperature. # # Note: It is required to keep "tic_method = 2" to have the initial # hot blob. tic_method = 2 blob_center = 1.570800e+00,1.570800e+00,9.246600e-01 blob_radius = 6.278334e-02 blob_dT = 0.18 half_space_age = 100.0 [CitcomS.solver.bc] topvbc = 2 pseudo_free_surf = on bottbcval = 0.82 # To convert pseudo-free-surface B.C. to free-slip B.C., do the # following: #topvbc = 0 #pseudo_free_surf = off [CitcomS.solver.param] start_age = 60 mantle_temp = 0.82 [CitcomS.solver.visc] TDEPV = on visc0 = 1,1,1,1 viscE = 9.50614,9.50614,9.50614,9.50614 viscT = 1.02126,1.02126,1.02126,1.02126 [CitcomS.solver.const] radius = 6.371e+06 density = 3270.0 thermdiff = 1.0e-06 gravacc = 10.0 thermexp = 3.0e-05 refvisc = 1.0e+21