ast_drv.c
/*
* Copyright 2012 Red Hat Inc.
*
* Permission is hereby granted, free of charge, to any person obtaining a
* copy of this software and associated documentation files (the
* "Software"), to deal in the Software without restriction, including
* without limitation the rights to use, copy, modify, merge, publish,
* distribute, sub license, and/or sell copies of the Software, and to
* permit persons to whom the Software is furnished to do so, subject to
* the following conditions:
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS, AUTHORS AND/OR ITS SUPPLIERS BE LIABLE FOR ANY CLAIM,
* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
* OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE
* USE OR OTHER DEALINGS IN THE SOFTWARE.
*
* The above copyright notice and this permission notice (including the
* next paragraph) shall be included in all copies or substantial portions
* of the Software.
*
*/
/*
* Authors: Dave Airlie <airlied@redhat.com>
*/
#include <linux/module.h>
#include <linux/pci.h>
#include <drm/drm_aperture.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_fbdev_generic.h>
#include <drm/drm_gem_shmem_helper.h>
#include <drm/drm_module.h>
#include <drm/drm_probe_helper.h>
#include "ast_drv.h"
static int ast_modeset = -1;
MODULE_PARM_DESC(modeset, "Disable/Enable modesetting");
module_param_named(modeset, ast_modeset, int, 0400);
/*
* DRM driver
*/
DEFINE_DRM_GEM_FOPS(ast_fops);
static const struct drm_driver ast_driver = {
.driver_features = DRIVER_ATOMIC |
DRIVER_GEM |
DRIVER_MODESET,
.fops = &ast_fops,
.name = DRIVER_NAME,
.desc = DRIVER_DESC,
.date = DRIVER_DATE,
.major = DRIVER_MAJOR,
.minor = DRIVER_MINOR,
.patchlevel = DRIVER_PATCHLEVEL,
DRM_GEM_SHMEM_DRIVER_OPS
};
/*
* PCI driver
*/
#define PCI_VENDOR_ASPEED 0x1a03
#define AST_VGA_DEVICE(id, info) { \
.class = PCI_BASE_CLASS_DISPLAY << 16, \
.class_mask = 0xff0000, \
.vendor = PCI_VENDOR_ASPEED, \
.device = id, \
.subvendor = PCI_ANY_ID, \
.subdevice = PCI_ANY_ID, \
.driver_data = (unsigned long) info }
static const struct pci_device_id ast_pciidlist[] = {
AST_VGA_DEVICE(PCI_CHIP_AST2000, NULL),
AST_VGA_DEVICE(PCI_CHIP_AST2100, NULL),
{0, 0, 0},
};
MODULE_DEVICE_TABLE(pci, ast_pciidlist);
static bool ast_is_vga_enabled(void __iomem *ioregs)
{
u8 vgaer = __ast_read8(ioregs, AST_IO_VGAER);
return vgaer & AST_IO_VGAER_VGA_ENABLE;
}
static void ast_enable_vga(void __iomem *ioregs)
{
__ast_write8(ioregs, AST_IO_VGAER, AST_IO_VGAER_VGA_ENABLE);
__ast_write8(ioregs, AST_IO_VGAMR_W, AST_IO_VGAMR_IOSEL);
}
/*
* Run this function as part of the HW device cleanup; not
* when the DRM device gets released.
*/
static void ast_enable_mmio_release(void *data)
{
void __iomem *ioregs = (void __force __iomem *)data;
/* enable standard VGA decode */
__ast_write8_i(ioregs, AST_IO_VGACRI, 0xa1, AST_IO_VGACRA1_MMIO_ENABLED);
}
static int ast_enable_mmio(struct device *dev, void __iomem *ioregs)
{
void *data = (void __force *)ioregs;
__ast_write8_i(ioregs, AST_IO_VGACRI, 0xa1,
AST_IO_VGACRA1_MMIO_ENABLED |
AST_IO_VGACRA1_VGAIO_DISABLED);
return devm_add_action_or_reset(dev, ast_enable_mmio_release, data);
}
static void ast_open_key(void __iomem *ioregs)
{
__ast_write8_i(ioregs, AST_IO_VGACRI, 0x80, AST_IO_VGACR80_PASSWORD);
}
static int ast_detect_chip(struct pci_dev *pdev,
void __iomem *regs, void __iomem *ioregs,
enum ast_chip *chip_out,
enum ast_config_mode *config_mode_out)
{
struct device *dev = &pdev->dev;
struct device_node *np = dev->of_node;
enum ast_config_mode config_mode = ast_use_defaults;
uint32_t scu_rev = 0xffffffff;
enum ast_chip chip;
u32 data;
u8 vgacrd0, vgacrd1;
/*
* Find configuration mode and read SCU revision
*/
/* Check if we have device-tree properties */
if (np && !of_property_read_u32(np, "aspeed,scu-revision-id", &data)) {
/* We do, disable P2A access */
config_mode = ast_use_dt;
scu_rev = data;
} else if (pdev->device == PCI_CHIP_AST2000) { // Not all families have a P2A bridge
/*
* The BMC will set SCU 0x40 D[12] to 1 if the P2 bridge
* is disabled. We force using P2A if VGA only mode bit
* is set D[7]
*/
vgacrd0 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd0);
vgacrd1 = __ast_read8_i(ioregs, AST_IO_VGACRI, 0xd1);
if (!(vgacrd0 & 0x80) || !(vgacrd1 & 0x10)) {
/*
* We have a P2A bridge and it is enabled.
*/
/* Patch AST2500/AST2510 */
if ((pdev->revision & 0xf0) == 0x40) {
if (!(vgacrd0 & AST_VRAM_INIT_STATUS_MASK))
ast_patch_ahb_2500(regs);
}
/* Double check that it's actually working */
data = __ast_read32(regs, 0xf004);
if ((data != 0xffffffff) && (data != 0x00)) {
config_mode = ast_use_p2a;
/* Read SCU7c (silicon revision register) */
__ast_write32(regs, 0xf004, 0x1e6e0000);
__ast_write32(regs, 0xf000, 0x1);
scu_rev = __ast_read32(regs, 0x1207c);
}
}
}
switch (config_mode) {
case ast_use_defaults:
dev_info(dev, "Using default configuration\n");
break;
case ast_use_dt:
dev_info(dev, "Using device-tree for configuration\n");
break;
case ast_use_p2a:
dev_info(dev, "Using P2A bridge for configuration\n");
break;
}
/*
* Identify chipset
*/
if (pdev->revision >= 0x50) {
chip = AST2600;
dev_info(dev, "AST 2600 detected\n");
} else if (pdev->revision >= 0x40) {
switch (scu_rev & 0x300) {
case 0x0100:
chip = AST2510;
dev_info(dev, "AST 2510 detected\n");
break;
default:
chip = AST2500;
dev_info(dev, "AST 2500 detected\n");
break;
}
} else if (pdev->revision >= 0x30) {
switch (scu_rev & 0x300) {
case 0x0100:
chip = AST1400;
dev_info(dev, "AST 1400 detected\n");
break;
default:
chip = AST2400;
dev_info(dev, "AST 2400 detected\n");
break;
}
} else if (pdev->revision >= 0x20) {
switch (scu_rev & 0x300) {
case 0x0000:
chip = AST1300;
dev_info(dev, "AST 1300 detected\n");
break;
default:
chip = AST2300;
dev_info(dev, "AST 2300 detected\n");
break;
}
} else if (pdev->revision >= 0x10) {
switch (scu_rev & 0x0300) {
case 0x0200:
chip = AST1100;
dev_info(dev, "AST 1100 detected\n");
break;
case 0x0100:
chip = AST2200;
dev_info(dev, "AST 2200 detected\n");
break;
case 0x0000:
chip = AST2150;
dev_info(dev, "AST 2150 detected\n");
break;
default:
chip = AST2100;
dev_info(dev, "AST 2100 detected\n");
break;
}
} else {
chip = AST2000;
dev_info(dev, "AST 2000 detected\n");
}
*chip_out = chip;
*config_mode_out = config_mode;
return 0;
}
static int ast_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
struct device *dev = &pdev->dev;
int ret;
void __iomem *regs;
void __iomem *ioregs;
enum ast_config_mode config_mode;
enum ast_chip chip;
struct drm_device *drm;
bool need_post = false;
ret = drm_aperture_remove_conflicting_pci_framebuffers(pdev, &ast_driver);
if (ret)
return ret;
ret = pcim_enable_device(pdev);
if (ret)
return ret;
regs = pcim_iomap(pdev, 1, 0);
if (!regs)
return -EIO;
if (pdev->revision >= 0x40) {
/*
* On AST2500 and later models, MMIO is enabled by
* default. Adopt it to be compatible with ARM.
*/
resource_size_t len = pci_resource_len(pdev, 1);
if (len < AST_IO_MM_OFFSET)
return -EIO;
if ((len - AST_IO_MM_OFFSET) < AST_IO_MM_LENGTH)
return -EIO;
ioregs = regs + AST_IO_MM_OFFSET;
} else if (pci_resource_flags(pdev, 2) & IORESOURCE_IO) {
/*
* Map I/O registers if we have a PCI BAR for I/O.
*/
resource_size_t len = pci_resource_len(pdev, 2);
if (len < AST_IO_MM_LENGTH)
return -EIO;
ioregs = pcim_iomap(pdev, 2, 0);
if (!ioregs)
return -EIO;
} else {
/*
* Anything else is best effort.
*/
resource_size_t len = pci_resource_len(pdev, 1);
if (len < AST_IO_MM_OFFSET)
return -EIO;
if ((len - AST_IO_MM_OFFSET) < AST_IO_MM_LENGTH)
return -EIO;
ioregs = regs + AST_IO_MM_OFFSET;
dev_info(dev, "Platform has no I/O space, using MMIO\n");
}
if (!ast_is_vga_enabled(ioregs)) {
dev_info(dev, "VGA not enabled on entry, requesting chip POST\n");
need_post = true;
}
/*
* If VGA isn't enabled, we need to enable now or subsequent
* access to the scratch registers will fail.
*/
if (need_post)
ast_enable_vga(ioregs);
/* Enable extended register access */
ast_open_key(ioregs);
ret = ast_enable_mmio(dev, ioregs);
if (ret)
return ret;
ret = ast_detect_chip(pdev, regs, ioregs, &chip, &config_mode);
if (ret)
return ret;
drm = ast_device_create(pdev, &ast_driver, chip, config_mode, regs, ioregs, need_post);
if (IS_ERR(drm))
return PTR_ERR(drm);
pci_set_drvdata(pdev, drm);
ret = drm_dev_register(drm, ent->driver_data);
if (ret)
return ret;
drm_fbdev_generic_setup(drm, 32);
return 0;
}
static void ast_pci_remove(struct pci_dev *pdev)
{
struct drm_device *dev = pci_get_drvdata(pdev);
drm_dev_unregister(dev);
drm_atomic_helper_shutdown(dev);
}
static void ast_pci_shutdown(struct pci_dev *pdev)
{
drm_atomic_helper_shutdown(pci_get_drvdata(pdev));
}
static int ast_drm_freeze(struct drm_device *dev)
{
int error;
error = drm_mode_config_helper_suspend(dev);
if (error)
return error;
pci_save_state(to_pci_dev(dev->dev));
return 0;
}
static int ast_drm_thaw(struct drm_device *dev)
{
ast_post_gpu(dev);
return drm_mode_config_helper_resume(dev);
}
static int ast_drm_resume(struct drm_device *dev)
{
if (pci_enable_device(to_pci_dev(dev->dev)))
return -EIO;
return ast_drm_thaw(dev);
}
static int ast_pm_suspend(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *ddev = pci_get_drvdata(pdev);
int error;
error = ast_drm_freeze(ddev);
if (error)
return error;
pci_disable_device(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
static int ast_pm_resume(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *ddev = pci_get_drvdata(pdev);
return ast_drm_resume(ddev);
}
static int ast_pm_freeze(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *ddev = pci_get_drvdata(pdev);
return ast_drm_freeze(ddev);
}
static int ast_pm_thaw(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *ddev = pci_get_drvdata(pdev);
return ast_drm_thaw(ddev);
}
static int ast_pm_poweroff(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
struct drm_device *ddev = pci_get_drvdata(pdev);
return ast_drm_freeze(ddev);
}
static const struct dev_pm_ops ast_pm_ops = {
.suspend = ast_pm_suspend,
.resume = ast_pm_resume,
.freeze = ast_pm_freeze,
.thaw = ast_pm_thaw,
.poweroff = ast_pm_poweroff,
.restore = ast_pm_resume,
};
static struct pci_driver ast_pci_driver = {
.name = DRIVER_NAME,
.id_table = ast_pciidlist,
.probe = ast_pci_probe,
.remove = ast_pci_remove,
.shutdown = ast_pci_shutdown,
.driver.pm = &ast_pm_ops,
};
drm_module_pci_driver_if_modeset(ast_pci_driver, ast_modeset);
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL and additional rights");
