spi-test.h
/*
* linux/drivers/spi/spi-test.h
*
* (c) Martin Sperl <kernel@martin.sperl.org>
*
* spi_test definitions
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/spi/spi.h>
#define SPI_TEST_MAX_TRANSFERS 4
#define SPI_TEST_MAX_SIZE (32 * PAGE_SIZE)
#define SPI_TEST_MAX_ITERATE 32
/* the "dummy" start addresses used in spi_test
* these addresses get translated at a later stage
*/
#define RX_START BIT(30)
#define TX_START BIT(31)
#define RX(off) ((void *)(RX_START + off))
#define TX(off) ((void *)(TX_START + off))
/* some special defines for offsets */
#define SPI_TEST_MAX_SIZE_HALF BIT(29)
/* detection pattern for unfinished reads...
* - 0x00 or 0xff could be valid levels for tx_buf = NULL,
* so we do not use either of them
*/
#define SPI_TEST_PATTERN_UNWRITTEN 0xAA
#define SPI_TEST_PATTERN_DO_NOT_WRITE 0x55
#define SPI_TEST_CHECK_DO_NOT_WRITE 64
/**
* struct spi_test - describes a specific (set of) tests to execute
*
* @description: description of the test
*
* @msg: a template @spi_message usedfor the default settings
* @transfers: array of @spi_transfers that are part of the
* resulting spi_message. The first transfer with len == 0
* signifies the end of the list
* @transfer_count: normally computed number of transfers with len > 0
*
* @run_test: run a specific spi_test - this allows to override
* the default implementation of @spi_test_run_transfer
* either to add some custom filters for a specific test
* or to effectively run some very custom tests...
* @execute_msg: run the spi_message for real - this allows to override
* @spi_test_execute_msg to apply final modifications
* on the spi_message
* @expected_return: the expected return code - in some cases we want to
* test also for error conditions
*
* @iterate_len: list of length to iterate on (in addition to the
* explicitly set @spi_transfer.len)
* @iterate_tx_align: change the alignment of @spi_transfer.tx_buf
* for all values in the below range if set.
* the ranges are:
* [0 : @spi_master.dma_alignment[ if set
* [0 : iterate_tx_align[ if unset
* @iterate_rx_align: change the alignment of @spi_transfer.rx_buf
* see @iterate_tx_align for details
* @iterate_transfer_mask: the bitmask of transfers to which the iterations
* apply - if 0, then it applies to all transfer
*
* @fill_option: define the way how tx_buf is filled
* @fill_pattern: fill pattern to apply to the tx_buf
* (used in some of the @fill_options)
*/
struct spi_test {
char description[64];
struct spi_message msg;
struct spi_transfer transfers[SPI_TEST_MAX_TRANSFERS];
unsigned int transfer_count;
int (*run_test)(struct spi_device *spi, struct spi_test *test,
void *tx, void *rx);
int (*execute_msg)(struct spi_device *spi, struct spi_test *test,
void *tx, void *rx);
int expected_return;
/* iterate over all the non-zero values */
int iterate_len[SPI_TEST_MAX_ITERATE];
int iterate_tx_align;
int iterate_rx_align;
u32 iterate_transfer_mask;
/* the tx-fill operation */
u32 fill_option;
#define FILL_MEMSET_8 0 /* just memset with 8 bit */
#define FILL_MEMSET_16 1 /* just memset with 16 bit */
#define FILL_MEMSET_24 2 /* just memset with 24 bit */
#define FILL_MEMSET_32 3 /* just memset with 32 bit */
#define FILL_COUNT_8 4 /* fill with a 8 byte counter */
#define FILL_COUNT_16 5 /* fill with a 16 bit counter */
#define FILL_COUNT_24 6 /* fill with a 24 bit counter */
#define FILL_COUNT_32 7 /* fill with a 32 bit counter */
#define FILL_TRANSFER_BYTE_8 8 /* fill with the transfer byte - 8 bit */
#define FILL_TRANSFER_BYTE_16 9 /* fill with the transfer byte - 16 bit */
#define FILL_TRANSFER_BYTE_24 10 /* fill with the transfer byte - 24 bit */
#define FILL_TRANSFER_BYTE_32 11 /* fill with the transfer byte - 32 bit */
#define FILL_TRANSFER_NUM 16 /* fill with the transfer number */
u32 fill_pattern;
};
/* default implementation for @spi_test.run_test */
int spi_test_run_test(struct spi_device *spi,
const struct spi_test *test,
void *tx, void *rx);
/* default implementation for @spi_test.execute_msg */
int spi_test_execute_msg(struct spi_device *spi,
struct spi_test *test,
void *tx, void *rx);
/* function to execute a set of tests */
int spi_test_run_tests(struct spi_device *spi,
struct spi_test *tests);
/* some of the default @spi_transfer.len to test */
#define ITERATE_LEN 2, 3, 7, 11, 16, 31, 32, 64, 97, 128, 251, 256, \
1021, 1024, 1031, 4093, PAGE_SIZE, 4099, 65536, 65537
#define ITERATE_MAX_LEN ITERATE_LEN, SPI_TEST_MAX_SIZE - 1, SPI_TEST_MAX_SIZE
/* the default alignment to test */
#define ITERATE_ALIGN sizeof(int)