##### https://github.com/cran/doParallel
Tip revision: b17d866
gettingstartedParallel.Rnw
% \VignetteIndexEntry{Getting Started with doParallel and foreach}
% \VignetteDepends{doParallel}
% \VignetteDepends{foreach}
% \VignettePackage{doParallel}
\documentclass[12pt]{article}
\usepackage{amsmath}
\usepackage[pdftex]{graphicx}
\usepackage{color}
\usepackage{xspace}
\usepackage{url}
\usepackage{fancyvrb}
\usepackage{fancyhdr}
\usepackage[
citecolor=blue,
urlcolor=blue]
{hyperref}
\usepackage{lscape}

\usepackage{Sweave}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% define new colors for use
\definecolor{darkgreen}{rgb}{0,0.6,0}
\definecolor{darkred}{rgb}{0.6,0.0,0}
\definecolor{lightbrown}{rgb}{1,0.9,0.8}
\definecolor{brown}{rgb}{0.6,0.3,0.3}
\definecolor{darkblue}{rgb}{0,0,0.8}
\definecolor{darkmagenta}{rgb}{0.5,0,0.5}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\newcommand{\bld}[1]{\mbox{\boldmath $#1$}}
\newcommand{\shell}[1]{\mbox{$#1$}}
\renewcommand{\vec}[1]{\mbox{\bf {#1}}}


\newcommand{\halfs}{\frac{1}{2}}

\setlength{\oddsidemargin}{-.25 truein}
\setlength{\evensidemargin}{0truein}
\setlength{\topmargin}{-0.2truein}
\setlength{\textwidth}{7 truein}
\setlength{\textheight}{8.5 truein}
\setlength{\parindent}{0.20truein}
\setlength{\parskip}{0.10truein}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\pagestyle{fancy}
\chead{Getting Started with doParallel and foreach}
\lfoot{}
\cfoot{}
\rfoot{\thepage}
\renewcommand{\footrulewidth}{1pt}
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

\title{Getting Started with doParallel and foreach}
\author{Steve Weston\footnote{Steve Weston wrote the original version of this vignette for the doMC package. Rich Calaway
adapted the vignette for doParallel.} and Rich Calaway \\ doc@revolutionanalytics.com}

\begin{document}

\maketitle

\thispagestyle{empty}

\section{Introduction}

The \texttt{doParallel} package is a parallel backend'' for the
\texttt{foreach} package.  It provides a mechanism needed to execute
\texttt{foreach} loops in parallel.  The \texttt{foreach} package must
be used in conjunction with a package such as \texttt{doParallel} in order to
execute code in parallel.  The user must register a parallel backend to
use, otherwise \texttt{foreach} will execute tasks sequentially, even
when the \%dopar\% operator is used.\footnote{\texttt{foreach} will
issue a warning that it is running sequentially if no parallel backend
has been registered.  It will only issue this warning once, however.}

The \texttt{doParallel} package acts as an interface between \texttt{foreach}
and the \texttt{parallel} package of R 2.14.0 and later. The \texttt{parallel}
package is essentially a merger of the \texttt{multicore} package, which was
written by Simon Urbanek, and the \texttt{snow} package, which was written
by Luke Tierney and others. The \texttt{multicore} functionality supports
multiple workers only on those operating systems that
support the \texttt{fork} system call; this excludes Windows. By default,
\texttt{doParallel} uses \texttt{multicore} functionality on Unix-like
systems and \texttt{snow} functionality on Windows.  Note that
the \texttt{multicore} functionality only runs tasks on a single
computer, not a cluster of computers. However, you can use the
\texttt{snow} functionality to execute on a cluster, using Unix-like
operating systems, Windows, or even a combination.
It is pointless to use \texttt{doParallel} and \texttt{parallel}
on a machine with only one processor with a single core.  To get a speed
improvement, it must run on a machine with multiple processors, multiple
cores, or both.

\section{A word of caution}

Because the \texttt{parallel} package in \texttt{multicore} mode
starts its workers using
\texttt{fork} without doing a subsequent \texttt{exec}, it has some
limitations.  Some operations cannot be performed properly by forked
processes.  For example, connection objects very likely won't work.
In some cases, this could cause an object to become corrupted, and
the R session to crash.

\section{Registering the \texttt{doParallel} parallel backend}

To register \texttt{doParallel} to be used with \texttt{foreach}, you must
call the \texttt{registerDoParallel} function.  If you call this with no
arguments, on Windows you will get three workers and on Unix-like
systems you will get a number of workers equal to approximately half the
number of cores on your system. You can also specify a cluster
(as created by the \texttt{makeCluster} function) or a number of cores.
The \texttt{cores} argument specifies the number of worker
processes that \texttt{doParallel} will use to execute tasks, which will
by default be
equal to one-half the total number of cores on the machine.  You don't need to
specify a value for it, however.  By default, \texttt{doParallel} will use the
value of the cores'' option, as specified with
the standard options'' function.  If that isn't set, then
\texttt{doParallel} will try to detect the number of cores, and use one-half
that many workers.

Remember: unless \texttt{registerDoMC} is called, \texttt{foreach} will
{\em not} run in parallel.  Simply loading the \texttt{doParallel} package is
not enough.

\section{An example \texttt{doParallel} session}

Before we go any further, let's load \texttt{doParallel}, register it, and use
it with \texttt{foreach}. We will use \texttt{snow}-like functionality in this
vignette, so we start by loading the package and starting a cluster:

library(doParallel)
cl <- makeCluster(3)
registerDoParallel(cl)
foreach(i=1:3) %dopar% sqrt(i)
@

To use \texttt{multicore}-like functionality, we would specify the number
of cores to use instead (but note that on Windows, attempting to use more
than one core with \texttt{parallel} results in an error):
\begin{verbatim}
library(doParallel}
registerDoParallel(cores=3)
foreach(i=1:3) %dopar% sqrt(i)
\end{verbatim}

\begin{quote}
Note well that this is {\em not} a practical use of \texttt{doParallel}.  This
is our Hello, world'' program for parallel computing.  It tests that
everything is installed and set up properly, but don't expect it to run
faster than a sequential \texttt{for} loop, because it won't!
\texttt{sqrt} executes far too quickly to be worth executing in
parallel, even with a large number of iterations.  With small tasks, the
overhead of scheduling the task and returning the result can be greater
than the time to execute the task itself, resulting in poor performance.
In addition, this example doesn't make use of the vector capabilities of
\texttt{sqrt}, which it must to get decent performance.  This is just a
test and a pedagogical example, {\em not} a benchmark.
\end{quote}

But returning to the point of this example, you can see that it is very
simple to load \texttt{doParallel} with all of its dependencies
(\texttt{foreach}, \texttt{iterators}, \texttt{parallel}, etc), and to
register it.  For the rest of the R session, whenever you execute
\texttt{foreach} with \texttt{\%dopar\%}, the tasks will be executed
using \texttt{doParallel} and \texttt{parallel}.  Note that you can register
a different parallel backend later, or deregister \texttt{doParallel} by
registering the sequential backend by calling the \texttt{registerDoSEQ}
function.

\section{A more serious example}

Now that we've gotten our feet wet, let's do something a bit less
trivial.  One good example is bootstrapping.  Let's see how long it
takes to run 10,000 bootstrap iterations in parallel on
\Sexpr{getDoParWorkers()} cores:

<<bootpar>>=
x <- iris[which(iris[,5] != "setosa"), c(1,5)]
trials <- 10000

ptime <- system.time({
r <- foreach(icount(trials), .combine=cbind) %dopar% {
ind <- sample(100, 100, replace=TRUE)
result1 <- glm(x[ind,2]~x[ind,1], family=binomial(logit))
coefficients(result1)
}
})[3]
ptime
@

Using \texttt{doParallel} and \texttt{parallel} we were able to perform
10,000 bootstrap iterations in \Sexpr{ptime} seconds on
\Sexpr{getDoParWorkers()} cores.  By changing the \texttt{\%dopar\%} to
\texttt{\%do\%}, we can run the same code sequentially to determine the
performance improvement:

<<bootseq>>=
stime <- system.time({
r <- foreach(icount(trials), .combine=cbind) %do% {
ind <- sample(100, 100, replace=TRUE)
result1 <- glm(x[ind,2]~x[ind,1], family=binomial(logit))
coefficients(result1)
}
})[3]
stime
@

The sequential version ran in \Sexpr{stime} seconds, which means the
speed up is about \Sexpr{round(stime / ptime, digits=1)} on
\Sexpr{getDoParWorkers()} workers.\footnote{If you build this vignette
yourself, you can see how well this problem runs on your hardware.  None
of the times are hardcoded in this document.  You can also run the same
example which is in the examples directory of the \texttt{doParallel}
distribution.} Ideally, the speed up would be \Sexpr{getDoParWorkers()},
but no multicore CPUs are ideal, and neither are the operating systems
and software that run on them.

At any rate, this is a more realistic example that is worth executing in
parallel.  We do not explain what it's doing or how it works
here.  We just want to give you something more substantial than the
\texttt{sqrt} example in case you want to run some benchmarks yourself.
You can also run this example on a cluster by simply reregistering
with a cluster object that specifies the nodes to use. (See the
\texttt{makeCluster} help file for more details.)

\section{Getting information about the parallel backend}

To find out how many workers \texttt{foreach} is going to use, you can
use the \texttt{getDoParWorkers} function:

<<getDoParWorkers>>=
getDoParWorkers()
@

This is a useful sanity check that you're actually running in parallel.
If you haven't registered a parallel backend, or if your machine only
has one core, \texttt{getDoParWorkers} will return one.  In either case,
don't expect a speed improvement.  \texttt{foreach} is clever, but it
isn't magic.

The \texttt{getDoParWorkers} function is also useful when you want the
number of tasks to be equal to the number of workers.  You may want to
pass this value to an iterator constructor, for example.

You can also get the name and version of the currently registered
backend:

<<getDoParName>>=
getDoParName()
getDoParVersion()
@

This is mostly useful for documentation purposes, or for checking that
you have the most recent version of \texttt{doParallel}.

\section{Specifying multicore options}

When using \texttt{multicore}-like functionality, the \texttt{doParallel} package allows
you to specify various options when
running \texttt{foreach} that are supported by the underlying
\texttt{mclapply} function: preschedule'', set.seed'', silent'',
and cores''.  You can learn about these options from the
\texttt{mclapply} man page.  They are set using the \texttt{foreach}
\texttt{.options.multicore} argument.  Here's an example of how to do
that:

\begin{verbatim}
mcoptions <- list(preschedule=FALSE, set.seed=FALSE)
foreach(i=1:3, .options.multicore=mcoptions) %dopar% sqrt(i)
\end{verbatim}

The cores'' options allows you to temporarily override the number of
workers to use for a single \texttt{foreach} operation.  This is more
convenient than having to re-register \texttt{doParallel}.  Although if no
value of cores'' was specified when \texttt{doParallel} was registered, you
can also change this value dynamically using the \texttt{options}
function:

\begin{verbatim}
options(cores=2)
getDoParWorkers()
options(cores=3)
getDoParWorkers()
\end{verbatim}

If you did specify the number of cores when registering \texttt{doParallel},
the cores'' option is ignored:

\begin{verbatim}
registerDoParallel(4)
options(cores=2)
getDoParWorkers()
\end{verbatim}

As you can see, there are a number of options for controlling the number
of workers to use with \texttt{parallel}, but the default behaviour
usually does what you want.

If you are using \texttt{snow}-like functionality, you will want to stop your
cluster when you are done using it. The \texttt{doParallel} package's
\texttt{.onUnload} function will do this automatically if the cluster was created
automatically by \texttt{registerDoParallel}, but if you created the cluster manually
you should stop it using the \texttt{stopCluster} function:

<<stopcluster>>=
stopCluster(cl)
@

\section{Conclusion}

The \texttt{doParallel} and \texttt{parallel} packages provide a nice,
efficient parallel programming platform for multiprocessor/multicore
computers running operating systems such as Linux and Mac OS X.  It is
very easy to install, and very easy to use.  In short order, an average
R programmer can start executing parallel programs, without any previous
experience in parallel computing.

\end{document}