amigayle.h
/*
** asm-m68k/amigayle.h -- This header defines the registers of the gayle chip
** found on the Amiga 1200
** This information was found by disassembling card.resource,
** so the definitions may not be 100% correct
** anyone has an official doc ?
**
** Copyright 1997 by Alain Malek
**
** This file is subject to the terms and conditions of the GNU General Public
** License. See the file COPYING in the main directory of this archive
** for more details.
**
** Created: 11/28/97 by Alain Malek
*/
#ifndef _M68K_AMIGAYLE_H_
#define _M68K_AMIGAYLE_H_
#include <linux/types.h>
#include <asm/amigahw.h>
/* memory layout */
#define GAYLE_RAM (0x600000+zTwoBase)
#define GAYLE_RAMSIZE (0x400000)
#define GAYLE_ATTRIBUTE (0xa00000+zTwoBase)
#define GAYLE_ATTRIBUTESIZE (0x020000)
#define GAYLE_IO (0xa20000+zTwoBase) /* 16bit and even 8bit registers */
#define GAYLE_IOSIZE (0x010000)
#define GAYLE_IO_8BITODD (0xa30000+zTwoBase) /* odd 8bit registers */
/* offset for accessing odd IO registers */
#define GAYLE_ODD (GAYLE_IO_8BITODD-GAYLE_IO-1)
/* GAYLE registers */
struct GAYLE {
u_char cardstatus;
u_char pad0[0x1000-1];
u_char intreq;
u_char pad1[0x1000-1];
u_char inten;
u_char pad2[0x1000-1];
u_char config;
u_char pad3[0x1000-1];
};
#define GAYLE_ADDRESS (0xda8000) /* gayle main registers base address */
#define GAYLE_RESET (0xa40000) /* write 0x00 to start reset,
read 1 byte to stop reset */
#define gayle (*(volatile struct GAYLE *)(zTwoBase+GAYLE_ADDRESS))
#define gayle_reset (*(volatile u_char *)(zTwoBase+GAYLE_RESET))
#define gayle_attribute ((volatile u_char *)(GAYLE_ATTRIBUTE))
#if 0
#define gayle_inb(a) readb( GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
#define gayle_outb(v,a) writeb( v, GAYLE_IO+(a)+(((a)&1)*GAYLE_ODD) )
#define gayle_inw(a) readw( GAYLE_IO+(a) )
#define gayle_outw(v,a) writew( v, GAYLE_IO+(a) )
#endif
/* GAYLE_CARDSTATUS bit def */
#define GAYLE_CS_CCDET 0x40 /* credit card detect */
#define GAYLE_CS_BVD1 0x20 /* battery voltage detect 1 */
#define GAYLE_CS_SC 0x20 /* credit card status change */
#define GAYLE_CS_BVD2 0x10 /* battery voltage detect 2 */
#define GAYLE_CS_DA 0x10 /* digital audio */
#define GAYLE_CS_WR 0x08 /* write enable (1 == enabled) */
#define GAYLE_CS_BSY 0x04 /* credit card busy */
#define GAYLE_CS_IRQ 0x04 /* interrupt request */
/* GAYLE_IRQ bit def */
#define GAYLE_IRQ_IDE 0x80
#define GAYLE_IRQ_CCDET 0x40
#define GAYLE_IRQ_BVD1 0x20
#define GAYLE_IRQ_SC 0x20
#define GAYLE_IRQ_BVD2 0x10
#define GAYLE_IRQ_DA 0x10
#define GAYLE_IRQ_WR 0x08
#define GAYLE_IRQ_BSY 0x04
#define GAYLE_IRQ_IRQ 0x04
#define GAYLE_IRQ_IDEACK1 0x02
#define GAYLE_IRQ_IDEACK0 0x01
/* GAYLE_CONFIG bit def
(bit 0-1 for program voltage, bit 2-3 for access speed */
#define GAYLE_CFG_0V 0x00
#define GAYLE_CFG_5V 0x01
#define GAYLE_CFG_12V 0x02
#define GAYLE_CFG_100NS 0x08
#define GAYLE_CFG_150NS 0x04
#define GAYLE_CFG_250NS 0x00
#define GAYLE_CFG_720NS 0x0c
struct gayle_ide_platform_data {
unsigned long base;
unsigned long irqport;
int explicit_ack; /* A1200 IDE needs explicit ack */
};
#endif /* asm-m68k/amigayle.h */