https://github.com/torvalds/linux
Tip revision: 2734d6c1b1a089fb593ef6a23d4b70903526fe0c authored by Linus Torvalds on 18 July 2021, 21:13:49 UTC
Linux 5.14-rc2
Linux 5.14-rc2
Tip revision: 2734d6c
gpio-sch.c
// SPDX-License-Identifier: GPL-2.0
/*
* GPIO interface for Intel Poulsbo SCH
*
* Copyright (c) 2010 CompuLab Ltd
* Author: Denis Turischev <denis@compulab.co.il>
*/
#include <linux/acpi.h>
#include <linux/bitops.h>
#include <linux/errno.h>
#include <linux/gpio/driver.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci_ids.h>
#include <linux/platform_device.h>
#include <linux/types.h>
#define GEN 0x00
#define GIO 0x04
#define GLV 0x08
#define GTPE 0x0c
#define GTNE 0x10
#define GGPE 0x14
#define GSMI 0x18
#define GTS 0x1c
#define CORE_BANK_OFFSET 0x00
#define RESUME_BANK_OFFSET 0x20
/*
* iLB datasheet describes GPE0BLK registers, in particular GPE0E.GPIO bit.
* Document Number: 328195-001
*/
#define GPE0E_GPIO 14
struct sch_gpio {
struct gpio_chip chip;
struct irq_chip irqchip;
spinlock_t lock;
unsigned short iobase;
unsigned short resume_base;
/* GPE handling */
u32 gpe;
acpi_gpe_handler gpe_handler;
};
static unsigned int sch_gpio_offset(struct sch_gpio *sch, unsigned int gpio,
unsigned int reg)
{
unsigned int base = CORE_BANK_OFFSET;
if (gpio >= sch->resume_base) {
gpio -= sch->resume_base;
base = RESUME_BANK_OFFSET;
}
return base + reg + gpio / 8;
}
static unsigned int sch_gpio_bit(struct sch_gpio *sch, unsigned int gpio)
{
if (gpio >= sch->resume_base)
gpio -= sch->resume_base;
return gpio % 8;
}
static int sch_gpio_reg_get(struct sch_gpio *sch, unsigned int gpio, unsigned int reg)
{
unsigned short offset, bit;
u8 reg_val;
offset = sch_gpio_offset(sch, gpio, reg);
bit = sch_gpio_bit(sch, gpio);
reg_val = !!(inb(sch->iobase + offset) & BIT(bit));
return reg_val;
}
static void sch_gpio_reg_set(struct sch_gpio *sch, unsigned int gpio, unsigned int reg,
int val)
{
unsigned short offset, bit;
u8 reg_val;
offset = sch_gpio_offset(sch, gpio, reg);
bit = sch_gpio_bit(sch, gpio);
reg_val = inb(sch->iobase + offset);
if (val)
outb(reg_val | BIT(bit), sch->iobase + offset);
else
outb((reg_val & ~BIT(bit)), sch->iobase + offset);
}
static int sch_gpio_direction_in(struct gpio_chip *gc, unsigned int gpio_num)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GIO, 1);
spin_unlock_irqrestore(&sch->lock, flags);
return 0;
}
static int sch_gpio_get(struct gpio_chip *gc, unsigned int gpio_num)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
return sch_gpio_reg_get(sch, gpio_num, GLV);
}
static void sch_gpio_set(struct gpio_chip *gc, unsigned int gpio_num, int val)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GLV, val);
spin_unlock_irqrestore(&sch->lock, flags);
}
static int sch_gpio_direction_out(struct gpio_chip *gc, unsigned int gpio_num,
int val)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GIO, 0);
spin_unlock_irqrestore(&sch->lock, flags);
/*
* according to the datasheet, writing to the level register has no
* effect when GPIO is programmed as input.
* Actually the the level register is read-only when configured as input.
* Thus presetting the output level before switching to output is _NOT_ possible.
* Hence we set the level after configuring the GPIO as output.
* But we cannot prevent a short low pulse if direction is set to high
* and an external pull-up is connected.
*/
sch_gpio_set(gc, gpio_num, val);
return 0;
}
static int sch_gpio_get_direction(struct gpio_chip *gc, unsigned int gpio_num)
{
struct sch_gpio *sch = gpiochip_get_data(gc);
if (sch_gpio_reg_get(sch, gpio_num, GIO))
return GPIO_LINE_DIRECTION_IN;
return GPIO_LINE_DIRECTION_OUT;
}
static const struct gpio_chip sch_gpio_chip = {
.label = "sch_gpio",
.owner = THIS_MODULE,
.direction_input = sch_gpio_direction_in,
.get = sch_gpio_get,
.direction_output = sch_gpio_direction_out,
.set = sch_gpio_set,
.get_direction = sch_gpio_get_direction,
};
static int sch_irq_type(struct irq_data *d, unsigned int type)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct sch_gpio *sch = gpiochip_get_data(gc);
irq_hw_number_t gpio_num = irqd_to_hwirq(d);
unsigned long flags;
int rising, falling;
switch (type & IRQ_TYPE_SENSE_MASK) {
case IRQ_TYPE_EDGE_RISING:
rising = 1;
falling = 0;
break;
case IRQ_TYPE_EDGE_FALLING:
rising = 0;
falling = 1;
break;
case IRQ_TYPE_EDGE_BOTH:
rising = 1;
falling = 1;
break;
default:
return -EINVAL;
}
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GTPE, rising);
sch_gpio_reg_set(sch, gpio_num, GTNE, falling);
irq_set_handler_locked(d, handle_edge_irq);
spin_unlock_irqrestore(&sch->lock, flags);
return 0;
}
static void sch_irq_ack(struct irq_data *d)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct sch_gpio *sch = gpiochip_get_data(gc);
irq_hw_number_t gpio_num = irqd_to_hwirq(d);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GTS, 1);
spin_unlock_irqrestore(&sch->lock, flags);
}
static void sch_irq_mask_unmask(struct irq_data *d, int val)
{
struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
struct sch_gpio *sch = gpiochip_get_data(gc);
irq_hw_number_t gpio_num = irqd_to_hwirq(d);
unsigned long flags;
spin_lock_irqsave(&sch->lock, flags);
sch_gpio_reg_set(sch, gpio_num, GGPE, val);
spin_unlock_irqrestore(&sch->lock, flags);
}
static void sch_irq_mask(struct irq_data *d)
{
sch_irq_mask_unmask(d, 0);
}
static void sch_irq_unmask(struct irq_data *d)
{
sch_irq_mask_unmask(d, 1);
}
static u32 sch_gpio_gpe_handler(acpi_handle gpe_device, u32 gpe, void *context)
{
struct sch_gpio *sch = context;
struct gpio_chip *gc = &sch->chip;
unsigned long core_status, resume_status;
unsigned long pending;
unsigned long flags;
int offset;
u32 ret;
spin_lock_irqsave(&sch->lock, flags);
core_status = inl(sch->iobase + CORE_BANK_OFFSET + GTS);
resume_status = inl(sch->iobase + RESUME_BANK_OFFSET + GTS);
spin_unlock_irqrestore(&sch->lock, flags);
pending = (resume_status << sch->resume_base) | core_status;
for_each_set_bit(offset, &pending, sch->chip.ngpio)
generic_handle_irq(irq_find_mapping(gc->irq.domain, offset));
/* Set returning value depending on whether we handled an interrupt */
ret = pending ? ACPI_INTERRUPT_HANDLED : ACPI_INTERRUPT_NOT_HANDLED;
/* Acknowledge GPE to ACPICA */
ret |= ACPI_REENABLE_GPE;
return ret;
}
static void sch_gpio_remove_gpe_handler(void *data)
{
struct sch_gpio *sch = data;
acpi_disable_gpe(NULL, sch->gpe);
acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler);
}
static int sch_gpio_install_gpe_handler(struct sch_gpio *sch)
{
struct device *dev = sch->chip.parent;
acpi_status status;
status = acpi_install_gpe_handler(NULL, sch->gpe, ACPI_GPE_LEVEL_TRIGGERED,
sch->gpe_handler, sch);
if (ACPI_FAILURE(status)) {
dev_err(dev, "Failed to install GPE handler for %u: %s\n",
sch->gpe, acpi_format_exception(status));
return -ENODEV;
}
status = acpi_enable_gpe(NULL, sch->gpe);
if (ACPI_FAILURE(status)) {
dev_err(dev, "Failed to enable GPE handler for %u: %s\n",
sch->gpe, acpi_format_exception(status));
acpi_remove_gpe_handler(NULL, sch->gpe, sch->gpe_handler);
return -ENODEV;
}
return devm_add_action_or_reset(dev, sch_gpio_remove_gpe_handler, sch);
}
static int sch_gpio_probe(struct platform_device *pdev)
{
struct gpio_irq_chip *girq;
struct sch_gpio *sch;
struct resource *res;
int ret;
sch = devm_kzalloc(&pdev->dev, sizeof(*sch), GFP_KERNEL);
if (!sch)
return -ENOMEM;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (!res)
return -EBUSY;
if (!devm_request_region(&pdev->dev, res->start, resource_size(res),
pdev->name))
return -EBUSY;
spin_lock_init(&sch->lock);
sch->iobase = res->start;
sch->chip = sch_gpio_chip;
sch->chip.label = dev_name(&pdev->dev);
sch->chip.parent = &pdev->dev;
switch (pdev->id) {
case PCI_DEVICE_ID_INTEL_SCH_LPC:
sch->resume_base = 10;
sch->chip.ngpio = 14;
/*
* GPIO[6:0] enabled by default
* GPIO7 is configured by the CMC as SLPIOVR
* Enable GPIO[9:8] core powered gpios explicitly
*/
sch_gpio_reg_set(sch, 8, GEN, 1);
sch_gpio_reg_set(sch, 9, GEN, 1);
/*
* SUS_GPIO[2:0] enabled by default
* Enable SUS_GPIO3 resume powered gpio explicitly
*/
sch_gpio_reg_set(sch, 13, GEN, 1);
break;
case PCI_DEVICE_ID_INTEL_ITC_LPC:
sch->resume_base = 5;
sch->chip.ngpio = 14;
break;
case PCI_DEVICE_ID_INTEL_CENTERTON_ILB:
sch->resume_base = 21;
sch->chip.ngpio = 30;
break;
case PCI_DEVICE_ID_INTEL_QUARK_X1000_ILB:
sch->resume_base = 2;
sch->chip.ngpio = 8;
break;
default:
return -ENODEV;
}
platform_set_drvdata(pdev, sch);
sch->irqchip.name = "sch_gpio";
sch->irqchip.irq_ack = sch_irq_ack;
sch->irqchip.irq_mask = sch_irq_mask;
sch->irqchip.irq_unmask = sch_irq_unmask;
sch->irqchip.irq_set_type = sch_irq_type;
girq = &sch->chip.irq;
girq->chip = &sch->irqchip;
girq->num_parents = 0;
girq->parents = NULL;
girq->parent_handler = NULL;
girq->default_type = IRQ_TYPE_NONE;
girq->handler = handle_bad_irq;
/* GPE setup is optional */
sch->gpe = GPE0E_GPIO;
sch->gpe_handler = sch_gpio_gpe_handler;
ret = sch_gpio_install_gpe_handler(sch);
if (ret)
dev_warn(&pdev->dev, "Can't setup GPE, no IRQ support\n");
return devm_gpiochip_add_data(&pdev->dev, &sch->chip, sch);
}
static struct platform_driver sch_gpio_driver = {
.driver = {
.name = "sch_gpio",
},
.probe = sch_gpio_probe,
};
module_platform_driver(sch_gpio_driver);
MODULE_AUTHOR("Denis Turischev <denis@compulab.co.il>");
MODULE_DESCRIPTION("GPIO interface for Intel Poulsbo SCH");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:sch_gpio");