https://github.com/torvalds/linux
Tip revision: 094226ad94f471a9f19e8f8e7140a09c2625abaa authored by Linus Torvalds on 13 November 2022, 21:12:55 UTC
Linux 6.1-rc5
Linux 6.1-rc5
Tip revision: 094226a
sa1100_h3600.c
// SPDX-License-Identifier: GPL-2.0
/*
* drivers/pcmcia/sa1100_h3600.c
*
* PCMCIA implementation routines for H3600
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/mach-types.h>
#include <mach/h3xxx.h>
#include "sa1100_generic.h"
static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
int err;
skt->stat[SOC_STAT_CD].name = skt->nr ? "pcmcia1-detect" : "pcmcia0-detect";
skt->stat[SOC_STAT_RDY].name = skt->nr ? "pcmcia1-ready" : "pcmcia0-ready";
err = soc_pcmcia_request_gpiods(skt);
if (err)
return err;
switch (skt->nr) {
case 0:
err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON");
if (err)
goto err01;
err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
if (err)
goto err03;
err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON");
if (err)
goto err03;
err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0);
if (err)
goto err04;
err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET");
if (err)
goto err04;
err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0);
if (err)
goto err05;
err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET");
if (err)
goto err05;
err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0);
if (err)
goto err06;
break;
case 1:
break;
}
return 0;
err06: gpio_free(H3XXX_EGPIO_CARD_RESET);
err05: gpio_free(H3XXX_EGPIO_OPT_RESET);
err04: gpio_free(H3XXX_EGPIO_OPT_ON);
err03: gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
err01: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
return err;
}
static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
switch (skt->nr) {
case 0:
/* Disable CF bus: */
gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
gpio_free(H3XXX_EGPIO_CARD_RESET);
gpio_free(H3XXX_EGPIO_OPT_RESET);
gpio_free(H3XXX_EGPIO_OPT_ON);
gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
break;
case 1:
break;
}
}
static void
h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
state->bvd1 = 0;
state->bvd2 = 0;
state->vs_3v = 0;
state->vs_Xv = 0;
}
static int
h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
if (state->Vcc != 0 && state->Vcc != 33 && state->Vcc != 50) {
printk(KERN_ERR "h3600_pcmcia: unrecognized Vcc %u.%uV\n",
state->Vcc / 10, state->Vcc % 10);
return -1;
}
gpio_set_value(H3XXX_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
/* Silently ignore Vpp, output enable, speaker enable. */
return 0;
}
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
/* Enable CF bus: */
gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 1);
gpio_set_value(H3XXX_EGPIO_OPT_ON, 1);
gpio_set_value(H3XXX_EGPIO_OPT_RESET, 0);
msleep(10);
}
static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
/*
* FIXME: This doesn't fit well. We don't have the mechanism in
* the generic PCMCIA layer to deal with the idea of two sockets
* on one bus. We rely on the cs.c behaviour shutting down
* socket 0 then socket 1.
*/
if (skt->nr == 1) {
gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
/* hmm, does this suck power? */
gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
}
}
struct pcmcia_low_level h3600_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = h3600_pcmcia_hw_init,
.hw_shutdown = h3600_pcmcia_hw_shutdown,
.socket_state = h3600_pcmcia_socket_state,
.configure_socket = h3600_pcmcia_configure_socket,
.socket_init = h3600_pcmcia_socket_init,
.socket_suspend = h3600_pcmcia_socket_suspend,
};
int pcmcia_h3600_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_h3600() || machine_is_h3100())
ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
return ret;
}