DOWN-TELEMETRY_PROGRAM.agc
### FILE="Main.annotation"
## Copyright: Public domain.
## Filename: DOWN-TELEMETRY_PROGRAM.agc
## Purpose: A section of Luminary revision 173.
## It is part of the reconstructed source code for the second
## (unflown) release of the flight software for the Lunar
## Module's (LM) Apollo Guidance Computer (AGC) for Apollo 14.
## The code has been recreated from a reconstructed copy of
## Luminary 178, as well as Luminary memo 167 (revision 1).
## It has been adapted such that the resulting bugger words
## exactly match those specified for Luminary 173 in NASA
## drawing 2021152N, which gives relatively high confidence
## that the reconstruction is correct.
## Reference: pp. 979-988
## Assembler: yaYUL
## Contact: Ron Burkey <info@sandroid.org>.
## Website: www.ibiblio.org/apollo/index.html
## Mod history: 2019-09-18 MAS Created from Luminary 178.
## Page 979
# PROGRAM NAME- DOWN TELEMETRY PROGRAM
# MOD NO.- 0 TO COMPLETELY REWRITE THE DOWN TELEMETRY PROGRAM AND DOWNLINK ERASABLE DUMP PROGRAM FOR THE
# PURPOSE OF SAVING APPROXIMATELY 150 WORDS OF CORE STORAGE.
# THIS CHANGE REQUIRES AN ENTIRELY NEW METHOD OF SPECIFYING DOWNLINK LISTS.REFER TO DOWNLINK
# LISTS LOG SECTION FOR MORE DETAILS. HOWEVER THIS CHANGE WILL NOT AFFECT THE GROUND PROCESSING
# OF DOWN TELEMETRY DATA.
# MOD BY- KILROY, SMITH, DEWITT
# DATE- 02OCT67
# AUTHORS- KILROY, SMITH, DEWITT, DEWOLF, FAGIN
# LOG SECTION- DOWN-TELEMETRY PROGRAM
# FUNCTIONAL DESCRIPTION- THIS ROUTINE IS INITIATED BY TELEMETRY END
# PULSE FROM THE DOWNLINK TELEMETRY CONVERTER. THIS PULSE OCCURS
# AT 50 TIMES PER SEC(EVERY 20 MS) THEREFORE DODOWNTM IS
# EXECUTED AT THESE RATES. THIS ROUTINE SELECTS THE APPROPRIATE
# AGC DATA TO BE TRANSMITTED DOWNLINK AND LOADS IT INTO OUTPUT
# CHANNELS 34 AND 35. THE INFORMATION IS THEN GATED OUT FROM THE
# LGC IN SERIAL FASHION.
# THIS PROGRAM IS CODED FOR A 2 SECOND DOWNLIST. SINCE DOWNRUPTS
# OCCUR EVERY 20MS AND 2 AGC COMPUTER WORDS CAN BE PLACED IN
# CHANNELS 34 AND 35 DURING EACH DOWNRUPT THE PROGRAM IS CAPABLE
# OF SENDING 200 AGC WORDS EVERY 2 SECONDS.
# CALLING SEQUENCE- NONE
# PROGRAM IS ENTERED VIA TCF DODOWNTM WHICH IS EXECUTED AS A
# RESULT OF A DOWNRUPT. CONTROL IS RETURNED VIA TCF RESUME WHICH
# IN EFFECT IS A RESUME.
# SUBROUTINES CALLED- NONE
# NORMAL EXIT MODE- TCF RESUME
# ALARM OR ABORT EXIT MODE- NONE
# RESTART PROTECTION:
# ON A FRESH START AND RESTART THE 'STARTSUB' SUBROUTINE WILL INITIALIZE THE DOWNLIST POINTER(ACTUALLY
# DNTMGOTO) TO THE BEGINNING OF THE CURRENT DOWNLIST(I.E. CURRENT CONTENTS OF DNLSTADR). THIS HAS THE
# EFFECT OF IGNORING THE REMAINDER OF THE DOWNLIST WHICH THE DOWN-TELEMETRY PROGRAM WAS WORKING ON WHEN
# THE RESTART(OR FRESH START) OCCURRED AND RESUME DOWN TELEMETRY FROM THE BEGINNING OF THE CURRENT
# DOWNLIST.
# ALSO OF INTEREST IS THE FACT THAT ON A RESTART THE AGC WILL ZERO DOWNLINK CHANNELS 13, 34 AND 35.
# DOWNLINK LIST SELECTION:
# THE APPROPRIATE DOWNLINK LISTS ARE SELECTED BY THE FOLLOWING:
# 1. FRESH START
# 2. V37EXXE WHERE XX = THE MAJOR MODE BEING SELECTED.
# 3. UPDATE PROGRAM(P27)
# 4. NON-V37 SELECTABLE TYPE PROGRAMS(E.G. AGS INITIALIZATION(SUNDANCE,LUMINARY) AND P61-P62
# TRANSITION(COLOSSUS) ETC.).
# DOWNLINK LIST RULES AND LIMITATIONS:
# READ SECTION(S) WHICH FOLLOW 'DEBRIS' WRITEUP.
# OUTPUT- EVERY 2 SECONDS 100 DOUBLE PRECISION WORDS(I.E. 200 LGC
# COMPUTER WORDS) ARE TRANSMITTED VIA DOWNLINK.
# ERASABLE INITIALIZATION REQUIRED- NONE
# 'DNTMGOTO' AND 'DNLSTADR' ARE INITIALIZED BY THE FRESH START PROGRAM.
# DEBRIS(ERASABLE LOCATIONS DESTROYED BY THIS PROGRAM)-
# LDATALST,DNTMBUFF TO DNTMBUFF +21D,TMINDEX,DNQ.
## Page 980
#
## Page 981
# DODOWNTM IS ENTERED EVERY 20 MS BY AN INTERRUPT TRIGGERED BY THE
# RECEIPT OF AN ENDPULSE FROM THE SPACECRAFT TELEMETRY PROGRAMMER.
# NOTES REGARDING DOWNLINK LISTS ASSOCIATED WITH THIS PROGRAM:
# 1. DOWNLISTS. - DOWNLISTS MUST BE COMPILED IN THE SAME BANK AS THE
# DOWN-TELEMETRY PROGRAM. THIS IS DONE FOR EASE OF CODING, FASTER
# EXECUTION.
# 2. EACH DOWNLINK LIST CONSISTS OF A CONTROL LIST AND A NUMBER OF
# SUBLISTS.
# 3. A SUBLIST REFERS TO A SNAPSHOT OR DATA COMMON TO THE SAME OR OTHER
# DOWNLINK LISTS. ANY SUBLIST CONTAINING COMMON DATA NEEDS TO BE
# CODED ONLY ONCE FOR THE APPLICABLE DOWNLINK LISTS.
# 4. SNAPSHOT SUBLISTS REFER SPECIFICALLY TO HOMOGENOUS DATA WHICH MUST BE
# SAVED IN A BUFFER DURING ONE DOWNRUPT.
# 5. THE 1DNADR FOR THE 1ST WORD OF SNAPSHOT DATA IS FOUND AT THE END
# OF EACH SNAPSHOT SUBLIST, SINCE THE PROGRAM CODING SENDS THIS DP WORD
# IMMEDIATELY AFTER STORING THE OTHERS IN THE SNAPSHOT BUFFER.
# 6. ALL LISTS ARE COMBINATIONS OF CODED ERASABLE ADDRESS CONSTANTS
# CREATED FOR THE DOWNLIST PROGRAM.
# A. 1DNADR 1-WORD DOWNLIST ADDRESS.
# SAME AS ECADR, BUT USED WHEN THE WORD ADDRESSED IS THE LEFT
# HALF OF A DOUBLE-PRECISION WORD FOR DOWN TELEMETRY.
# B. 2DNADR - 6DNADR N-WORD DOWNLIST ADDRESS, N = 2 - 6.
# SAME AS 1DNADR, BUT WITH THE 4 UNUSED BITS OF THE ECADR FORMAT
# FILLED IN WITH 0001-0101. USED TO POINT TO A LIST OF N DOUBLE-
# PRECISION WORDS, STORED CONSECUTIVELY, FOR DOWN TELEMETRY.
# C. DNCHAN DOWNLIST CHANNEL ADDRESS.
# SAME AS 1DNADR, BUT WITH PREFIX BITS 0111. USED TO POINT TO
# A PAIR OF CHANNELS FOR DOWN TELEMETRY.
# D. DNPTR DOWN TELEMETRY SUBLIST POINTER.
# SAME AS CAF BUT TAGGED AS A CONSTANT. USED IN CONTROL LIST TO POINT TO A SUBLIST.
# CAUTION--- A DNPTR CANNOT BE USED IN A SUBLIST.
# 7. THE WORD ORDER CODE IS SET TO ZERO AT THE BEGINNING OF EACH DOWNLIST (I.E. CONTROL LIST) AND WHEN
# A '1DNADR TIME2' IS DETECTED IN THE CONTROL LIST(ONLY).
# 8. IN THE SNAPSHOT SUBLIST ONLY, THE DNADR'S CANNOT POINT TO THE FIRST WORD OF ANY EBANK.
# DOWNLINK LIST RESTRICTIONS:
# (THE FOLLOWING POINTS MAY BE LISTED ELSEWHERE BUT ARE LISTED HERE SO IT IS CLEAR THAT THESE THINGS CANNOT BE
# DONE)
# 1. SNAPSHOT DOWNLIST:
# (A) CANNOT CONTAIN THE FOLLOWING ECADRS(I.E. 1DNADR'S): 0, 400, 1000, 1400, 2000, 2400, 3000, 3400.
# (B) CAN CONTAIN ONLY 1DNADR'S
# 2. ALL DOWNLINKED DATA(EXCEPT CHANNELS) IS PICKED UP BY A <DCA<SO DOWNLINK LISTS CANNOT CONTAIN THE
# EQUIVALENT OF THE FOLLOWING ECADRS(I.E. IDNADRS): 377, 777, 1377, 1777, 2377, 27777, 3377, 3777.
# (NOTE: THE TERM EQUIVALENT ' MEANT THAT THE IDNADR TO 6DNADR WILL BE PROCESSED LIKE 1 TO 6 ECADRS)
# 3. CONTROL LISTS AND SUBLISTS CANNOT HAVE ENTRIES = OCTAL 00000 OR OCTAL 77777
## Page 982
# 4. THE '1DNADR TIME2' WHICH WILL CAUSE THE DOWNLINK PROGRAM TO SET THE WORDER CODE TO 3 MUST APPEAR IN THE
# CONTROL SECTION OF THE DOWNLIST.
# 5. 'DNCHAN 0' CANNOT BE USED.
# 6. 'DNPTR 0' CANNOT BE USED.
# 7. DNPTR CANNOT APPEAR IN A SUBLIST.
#
# EBANK SETTINGS
# IN THE PROCESS OF SETTING THE EBANK(WHEN PICKING UP DOWNLINK DATA) THE DOWN TELEMETRY PROGRAM PUTS
# 'GARBAGE' INTO BITS15-12 OF EBANK. HUGH BLAIR-SMITH WARNS US THAT BITS15-12 OF EBANK MAY BECOME
# SIGNIFICANT SOMEDAY IN THE FUTURE. IF/WHEN THAT HAPPENS, THE PROGRAM SHOULD INSURE(BY MASKING ETC.)
# THAT BITS15-12 OF EBANK ARE ZERO.
# INITIALIZATION REQUIRED- TO INTERRUPT CURRENT LIST AND START A NEW ONE..
# 1. ADRES OF DOWNLINK LIST INTO DNLSTADR
# 2. NEGONE INTO SUBLIST
# 3. NEGONE INTO DNECADR
BANK 22
SETLOC DOWNTELM
BANK
EBANK= DNTMBUFF
COUNT* $$/DPROG
DODOWNTM TS BANKRUPT
EXTEND
QXCH QRUPT # SAVE Q
CA BIT7 # AT THE BEGINNING OF THE LIST THE WORD
EXTEND # ORDER BIT WILL BE SET BACK TO ZERO.
RAND CHAN13
CCS A
TC DNTMGOTO
TC C13STALL
CA BIT7
EXTEND # SET WORD ORDER BIT TO 1 ONLY IF IT
WOR CHAN13 # ALREADY ISN'T.
TC DNTMGOTO # GO TO APPROPRIATE PHASE OF PROGRAM
SETLOC DOWNTELM
BANK
DNPHASE1 CA NEGONE # INITIALIZE ALL CONTROL WORDS
TS SUBLIST # WORDS TO MINUS ONE
TS DNECADR
CA LDNPHAS2 # SET DNTMGOTO =O ALL SUBSEQUENT DOWNRUPTS
## Page 983
TS DNTMGOTO # GO TO DNPHASE2
TCF NEWLIST
DNPHASE2 CCS DNECADR # SENDING OF DATA IN PROGRESS
DODNADR TC FETCH2WD # YES - THEN FETCH THE NEXT 2 SP WORDS
MINTIME2 -1DNADR TIME2 # NEGATIVE OF TIME2 1DNADR
TCF +1 # (ECADR OF 3776 + 74001 = 77777)
CCS SUBLIST # IS THE SUBLIST IN CONTROL
TCF NEXTINSL # YES
DNADRDCR OCT 74001 # DNADR COUNT AND ECADR DECREMENTER
CHKLIST CA CTLIST
EXTEND
BZMF NEWLIST # IT WILL BE NEGATIVE AT END OF LIST
TCF NEXTINCL
NEWLIST INDEX DNLSTCOD
CA DNTABLE # INITIALIZE CTLIST WITH
TS CTLIST # STARTING ADDRESS OF NEW LIST
CS DNLSTCOD
TCF SENDID +3
NEXTINCL INDEX CTLIST
CA 0
CCS A
INCR CTLIST # SET POINTER TO PICK UP NEXT CTLIST WORD
TCF +4 # ON NEXT ENTRY TO PROG. (A SHOULD NOT =0)
XCH CTLIST # SET CTLIST TO NEGATIVE AND PLACE(CODING)
COM # UNCOMPLEMENTED DNADR INTO A. (FOR LA)
XCH CTLIST # (ST IN )
+4 INCR A # (CTLIST)
TS DNECADR # SAVE DNADR
AD MINTIME2 # TEST FOR TIME2 (NEG. OF ECADR)
CCS A
TCF SETWO +1 # DON'T SET WORD ORDER CODE
MINB1314 OCT 47777 # MINUS BIT 13 AND 14 (CAN'T GET HERE)
TCF SETWO +1 # DON'T SET WORD ORDER CODE
SETWO TC WOZERO # GO SET WORD ORDER CODE TO ZERO.
+1 CA DNECADR # RELOAD A WITH THE DNADR.
+2 AD MINB1314 # IS THIS A REGULAR DNADR?
EXTEND
BZMF FETCH2WD # YES. (A MUST NEVER BE ZERO)
AD MINB12 # NO- IS IT A POINTER (DNPTR) OR A
EXTEND # CHANNEL(DNCHAN)
BZMF DODNPTR # IT'S A POINTER. (A MUST NEVER BE ZERO)
DODNCHAN TC 6 # (EXECUTED AS EXTEND) IT S A CHANNEL
INDEX DNECADR
INDEX 0 -4000 # (EXECUTED AS READ)
TS L
TC 6 # (EXECUTED AS EXTEND)
INDEX DNECADR
## Page 984
INDEX 0 -4001 # (EXECUTED AS READ)
TS DNECADR # SET DNECADR
CA NEGONE # TO MINUS
XCH DNECADR # WHILE PRESERVING A.
TCF DNTMEXIT # GO SEND CHANNELS
WOZERO EXTEND
QXCH C13QSAV
LXCH RUPTREG1
TC C13STALL
LXCH RUPTREG1
CS BIT7
EXTEND
WAND CHAN13 # SET WORD ORDER CODE TO ZERO
TC C13QSAV
DODNPTR INDEX DNECADR # DNECADR CONTAINS ADRES OF SUBLIST
0 0 # CLEAR AND ADD LIST ENTRY INTO A.
CCS A # IS THIS A SNAPSHOT SUBLIST
CA DNECADR # NO, IT IS A REGULAR SUBLIST.
TCF DOSUBLST # A MUST NOT BE ZERO.
XCH DNECADR # YES, IT IS A SNAPSHOT SUBLIST.
TS SUBLIST # C(DNECADR) INTO SUBLIST
CAF ZERO # A INTO A
XCH TMINDEX # (NOTE.. TMINDEX = DNECADR)
# THE FOLLOWING CODING (FROM SNAPLOOP TO SNAPEND)IS FOR THE PURPOSE OF TAKING A SNAPSHOT OF 12 DP REGISTERS.
# THIS IS DONE BY SAVING 11 DP REGISTERS IN DNTMBUFF AND SENDING THE FIRST DP WORD IMMEDIATELY.
# THE SNAPSHOT PROCESSING IS THE MOST TIME CONSUMING AND THEREFORE THE CODING AND LIST STRUCTURE WERE DESIGNED
# TO MINIMIZE TIME. THE TIME OPTIMIZATION RESULTS IN RULES UNIQUE TO THE SNAPSHOT PORTION OF THE DOWNLIST.
# THESE RULES ARE......
# 1. ONLY 1DNADR'S CAN APPEAR IN THE SNAPSHOT SUBLIST
# 2. THE 1DNADR'S CANNOT REFER TO THE FIRST LOCATION IN ANY BANK.
SNAPLOOP TS EBANK # SET EBANK
MASK LOW8 # ISOLATE RELATIVE ADDRESS
EXTEND
INDEX A
EBANK= 1401
DCA 1401 # PICK UP 2 SNAPSHOT WORDS.
EBANK= DNTMBUFF
INDEX TMINDEX
DXCH DNTMBUFF # STORE 2 SNAPSHOT WORDS IN BUFFER
INCR TMINDEX # SET BUFFER INDEX FOR NEXT 2 WORDS.
INCR TMINDEX
SNAPAGN INCR SUBLIST # SET POINTER TO NEXT 2 WORDS OF SNAPSHOT
## Page 985
INDEX SUBLIST
0 0 # = CA SSSS (SSSS = NEXT ENTRY IN SUBLIST)
CCS A # TEST FOR LAST TWO WORDS OF SNAPSHOT.
TCF SNAPLOOP # NOT LAST TWO.
LDNPHAS2 GENADR DNPHASE2
TS SUBLIST # YES, LAST. SAVE A.
CA NEGONE # SET DNECADR AND
TS DNECADR # SUBLIST POINTERS
XCH SUBLIST # TO NEGATIVE VALUES.
TS EBANK
MASK LOW8
EXTEND
INDEX A
EBANK= 1401
DCA 1401 # PICK UP FIRST 2 WORDS OF SNAPSHOT.
EBANK= DNTMBUFF
SNAPEND TCF DNTMEXIT # NOW GO SEND THEM.
FETCH2WD CA DNECADR
TS EBANK # SET EBANK
MASK LOW8 # ISOLATE RELATIVE ADDRESS
TS L
CA DNADRDCR # DECREMENT COUNT AND ECADR
ADS DNECADR
EXTEND
INDEX L
EBANK= 1400
DCA 1400 # PICK UP 2 DATA WORDS
EBANK= DNTMBUFF
TCF DNTMEXIT # NOW GO SEND THEM.
DOSUBLST TS SUBLIST # SET SUBLIST POINTER
NEXTINSL INDEX SUBLIST
0 0 # = CA SSSS (SSSS = NEXT ENTRY IN SUBLIST)
CCS A # IS IT THE END OF THE SUBLIST
INCR SUBLIST # NO-
TCF +4
TS SUBLIST # SAVE A.
CA NEGONE # SET SUBLIST TO MINUS
XCH SUBLIST # RETRIEVE A.
+4 INCR A
TS DNECADR # SAVE DNADR
TCF SETWO +2 # GO USE COMMON CODING(PROBLEMS WOULD
# OCCUR IF THE PROGRAM ENCOUNTERED A
# DNPTR NOW)
DNTMEXIT EXTEND # DOWN-TELEMETRY EXIT
WRITE DNTM1 # TO SEND A + L TO CHANNELS 34 + 35
CA L # RESPECTIVELY
TMEXITL EXTEND
## Page 986
WRITE DNTM2
TMRESUME TCF RESUME # EXIT TELEMETRY PROGRAM VIA RESUME.
MINB12 EQUALS -1/8
DNECADR EQUALS TMINDEX
CTLIST EQUALS LDATALST
SUBLIST EQUALS DNQ
# MOD BY - DENSMORE - JUNE 1969 - ELIMINATE ERASABLE DUMP COUNT
## Page 987
# SUBROUTINE NAME- DNDUMP
# FUNCTIONAL DESCRIPTION - TO SEND (DUMP) ALL 8 BANKS OF ERASABLE STORAGE TWICE. BANKS ARE SENT ONE AT A TIME
# EACH BANK IS PRECEEDED BY AN ID WORD, SYNCH BITS, ECADR AND TIME1 FOLLOWED BY THE 256D WORDS OF EACH
# EBANK. EBANKS ARE DUMPED IN ORDER(I.E. EBANK 0 FIRST, THEN EBANK1 ETC.)
# CALLING SEQUENCE- THE GROUND OR ASTRONAUT BY KEYING V74E CAN INITIALIZE THE DUMP.
# AFTER KEYING IN V74E THE CURRENT DOWNLIST WILL BE IMMEDIATELY TERMINATED AND THE DOWNLINK ERASABLE DUMP
# WILL BEGIN.
# ONCE INITIATED THE DOWNLINK ERASABLE DUMP CAN BE TERMINATED (AND INTERRUPTED DOWNLIST REINSTATED) ONLY
# BY THE FOLLOWING:
# 1. A FRESH START
# 2. COMPLETION OF BOTH COMPLETE DUMPS
# 3. AND INVOLUNTARILY BY A RESTART.
# NORMAL EXIT MODE- TCF DNPHASE1
# ALARM OR ABORT MODE- NONE
# *SUBROUTINES CALLED- NONE.
# ERASABLE INITIALIZATION REQUIRED-
# NONE
# DEBRIS- DUMPLOC, DUMPSW, DNTMGOTO, EBANK AND CENTRAL REGISTERS
# TIMING- TIME(IN SECS) = ((NO.DUMPS)*(NO.EBANKS)* (WDSPEREBANK + NO.IDWDS)) / NO.WDSPERSEC
# TIME(IN SECS) = ( 4 )*( 8 )* ( 256 + 4 ) / 100
# THUS TIME(IN SECS TO SEND DUMP OF ERASABLE 4 TIMES VIA DOWNLINK) = 83.2 SECONDS
# STRUCTURE OF ONE EBANK AS IT IS SENT BY DOWNLINK PROGRAM-
# (REMINDER-THIS ONLY DESCRIBES ONE OF THE 8 EBANKS X 4 (DUMPS) = 32 EBANKS WHICH WILL BE SENT BY DNDUMP)
# DOWNLIST W
# WORD TAKEN FROM CONTENTS OF EXAMPLE O COMMENTS
# 1 ERASID 0177X 0 DOWNLIST I.D. FOR DOWNLINK ERASABLE DUMP (X=7 CSM, 6 LM)
# 2 LOWIDCOD 77340 1 DOWNLINK SYNCH BITS.(SAME ONE USED IN ALL OTHER DOWNLISTS)
# 3 DUMPLOC 13400 1 (SEE NOTES ON DUMPLOC)1= 3RD ERAS DUMP, 3400=ECADR OF 5TH WD
# 4 TIME1 14120 1 TIME IN CENTISECONDS
# 5 FIRST WORD OF EBANK X 03400 1 IN THIS EXAMPLE THIS WORD = CONTENTS OF E7,1400 (ECADR 3400)
# 6 2ND WORD OF EBANK X 00142 1 IN THIS EXAMPLE THIS WORD = CONTENTS OF E7,1401 (ECADR 3401)
# 7 3RD WORD OF EBANK X 00142 1 IN THIS EXAMPLE THIS WORD = CONTENTS OF E7,1402 (ECADR 3402)
# . 1
# . 1
# . 1
# 260D 256TH WORD OF EBANK X 03777 1 IN THIS EXAMPLE THIS WORD = CONTENTS OF E7,1777 (ECADR 3777)
#
# NOTE- DUMPLOC CONTAINS THE COUNTER AND ECADR FOR EACH WORD BEING SENT.
# THE BIT STRUCTURE OF DUMPLOC IS FOLLOWS---
# X = NOT USED
# X ABC EEE RRRRRRRR ABC = ERASABLE DUMP COUNTER(I.E. ABC = 0,1,2 OR 3 WHICH MEANS THAT
# COMPLETE ERASABLE DUMP NUMBER 1,2,3 OR 4 RESPECTIVELY IS IN PROGRESS)
# EEE = EBANK BITS
# RRRRRRRR = RELATIVE ADDRESS WITHIN AN EBANK.
DNDUMPI CA ZERO # INITIALIZE DOWNLINK
TS DUMPLOC # ERASABLE DUMP
+2 TC SENDID # GO SEND ID AND SYNCH BITS
## Page 988
CA LDNDUMP1 # SET DNTMGOTO
TS DNTMGOTO # TO LOCATION FOR NEXT PASS
CA TIME1 # PLACE TIME1
XCH L # INTO L
CA DUMPLOC # AND ECADR OF THIS EBANK INTO A
TCF DNTMEXIT # SEND DUMPLOC AND TIME1
LDNDUMP ADRES DNDUMP
LDNDUMP1 ADRES DNDUMP1
DNDUMP CA TWO # INCREMENT ECADR IN DUMPLOC
ADS DUMPLOC # TO NEXT DP WORD TO BE
MASK LOW8 # DUMPED AND SAVE IT.
CCS A # IS THIS THE BEGINNING OF A NEW EBANK
TCF DNDUMP2 # NO- THEN CONTINUE DUMPING
CA DUMPLOC # YES- IS THIS THE END OF THE
MASK BIT13 # SECOND COMPLETE ERASABLE DUMP?
EXTEND
BZF DNDUMPI +2 # NO - GO BACK AND INITIALIZE NEXT BANK
TCF DNPHASE1 # YES - SEND DOWNLIST AGAIN
DNDUMP1 CA LDNDUMP # SET DNTMGOTO
TS DNTMGOTO # FOR WORDS 3 TO 256D OF CURRENT EBANK
DNDUMP2 CA DUMPLOC
TS EBANK # SET EBANK
MASK LOW8 # ISOLATE RELATIVE ADDRESS.
TS Q # (NOTE: MASK INSTRUCTION IS USED TO PICK
CA NEG0 # UP ERASABLE REGISTERS SO THAT EDITING
TS L # REGISTERS 20-23 WILL NOT BE ALTERED.)
INDEX Q
EBANK= 1400 # PICK UP LOW ORDER REGISTER OF PAIR
MASK 1401 # OF ERASABLE REGISTERS.
XCH L
INDEX Q # PICK UP HIGH ORDER REGISTER OF PAIR
MASK 1400 # OF ERASABLE REGISTERS.
EBANK= DNTMBUFF
TCF DNTMEXIT # GO SEND THEM
SENDID EXTEND # **ENTRANCE USED BY ERASABLE DUMP PROG.**
QXCH DNTMGOTO # SET DNTMGOTO SO NEXT TIME PROG WILL GO
CAF ERASID # TO LOCATION FOLLOWING :TC SENDID:
TS L # **ENTRANCE USED BY REGULAR DOWNLINK PG**
TC WOZERO # GO SET WORD ORDER CODE TO ZERO
CAF LOWIDCOD # PLACE SPECIAL ID CODE INTO L
XCH L # AND ID BACK INTO A
TCF DNTMEXIT # SEND DOWNLIST ID CODE(S).
