mucmc52.dts
/*
* Manroland mucmc52 board Device Tree Source
*
* Copyright (C) 2009 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
* Copyright 2006-2007 Secret Lab Technologies Ltd.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "manroland,mucmc52";
compatible = "manroland,mucmc52";
#address-cells = <1>;
#size-cells = <1>;
interrupt-parent = <&mpc5200_pic>;
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,5200@0 {
device_type = "cpu";
reg = <0>;
d-cache-line-size = <32>;
i-cache-line-size = <32>;
d-cache-size = <0x4000>; // L1, 16K
i-cache-size = <0x4000>; // L1, 16K
timebase-frequency = <0>; // from bootloader
bus-frequency = <0>; // from bootloader
clock-frequency = <0>; // from bootloader
};
};
memory {
device_type = "memory";
reg = <0x00000000 0x04000000>; // 64MB
};
soc5200@f0000000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc5200b-immr";
ranges = <0 0xf0000000 0x0000c000>;
reg = <0xf0000000 0x00000100>;
bus-frequency = <0>; // from bootloader
system-frequency = <0>; // from bootloader
cdm@200 {
compatible = "fsl,mpc5200b-cdm","fsl,mpc5200-cdm";
reg = <0x200 0x38>;
};
mpc5200_pic: interrupt-controller@500 {
// 5200 interrupts are encoded into two levels;
interrupt-controller;
#interrupt-cells = <3>;
compatible = "fsl,mpc5200b-pic","fsl,mpc5200-pic";
reg = <0x500 0x80>;
};
gpt0: timer@600 { // GPT 0 in GPIO mode
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x600 0x10>;
interrupts = <1 9 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt1: timer@610 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x610 0x10>;
interrupts = <1 10 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt2: timer@620 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x620 0x10>;
interrupts = <1 11 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpt3: timer@630 { // General Purpose Timer in GPIO mode
compatible = "fsl,mpc5200b-gpt","fsl,mpc5200-gpt";
reg = <0x630 0x10>;
interrupts = <1 12 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_simple: gpio@b00 {
compatible = "fsl,mpc5200b-gpio","fsl,mpc5200-gpio";
reg = <0xb00 0x40>;
interrupts = <1 7 0>;
gpio-controller;
#gpio-cells = <2>;
};
gpio_wkup: gpio@c00 {
compatible = "fsl,mpc5200b-gpio-wkup","fsl,mpc5200-gpio-wkup";
reg = <0xc00 0x40>;
interrupts = <1 8 0 0 3 0>;
gpio-controller;
#gpio-cells = <2>;
};
dma-controller@1200 {
compatible = "fsl,mpc5200b-bestcomm","fsl,mpc5200-bestcomm";
reg = <0x1200 0x80>;
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
3 4 0 3 5 0 3 6 0 3 7 0
3 8 0 3 9 0 3 10 0 3 11 0
3 12 0 3 13 0 3 14 0 3 15 0>;
};
xlb@1f00 {
compatible = "fsl,mpc5200b-xlb","fsl,mpc5200-xlb";
reg = <0x1f00 0x100>;
};
serial@2000 { /* PSC1 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2000 0x100>;
interrupts = <2 1 0>;
};
serial@2200 { /* PSC2 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2200 0x100>;
interrupts = <2 2 0>;
};
serial@2c00 { /* PSC6 in UART mode */
compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart";
reg = <0x2c00 0x100>;
interrupts = <2 4 0>;
};
ethernet@3000 {
compatible = "fsl,mpc5200b-fec","fsl,mpc5200-fec";
reg = <0x3000 0x400>;
local-mac-address = [ 00 00 00 00 00 00 ];
interrupts = <2 5 0>;
phy-handle = <&phy0>;
};
mdio@3000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-mdio","fsl,mpc5200-mdio";
reg = <0x3000 0x400>; // fec range, since we need to setup fec interrupts
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
phy0: ethernet-phy@0 {
compatible = "intel,lxt971";
reg = <0>;
};
};
ata@3a00 {
compatible = "fsl,mpc5200b-ata","fsl,mpc5200-ata";
reg = <0x3a00 0x100>;
interrupts = <2 7 0>;
};
i2c@3d40 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
reg = <0x3d40 0x40>;
interrupts = <2 16 0>;
hwmon@2c {
compatible = "ad,adm9240";
reg = <0x2c>;
};
rtc@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
};
};
sram@8000 {
compatible = "fsl,mpc5200b-sram","fsl,mpc5200-sram";
reg = <0x8000 0x4000>;
};
};
pci@f0000d00 {
#interrupt-cells = <1>;
#size-cells = <2>;
#address-cells = <3>;
device_type = "pci";
compatible = "fsl,mpc5200b-pci","fsl,mpc5200-pci";
reg = <0xf0000d00 0x100>;
interrupt-map-mask = <0xf800 0 0 7>;
interrupt-map = <
/* IDSEL 0x10 */
0x8000 0 0 1 &mpc5200_pic 0 3 3
0x8000 0 0 2 &mpc5200_pic 0 3 3
0x8000 0 0 3 &mpc5200_pic 0 2 3
0x8000 0 0 4 &mpc5200_pic 0 1 3
>;
clock-frequency = <0>; // From boot loader
interrupts = <2 8 0 2 9 0 2 10 0>;
bus-range = <0 0>;
ranges = <0x42000000 0 0x60000000 0x60000000 0 0x10000000
0x02000000 0 0x90000000 0x90000000 0 0x10000000
0x01000000 0 0x00000000 0xa0000000 0 0x01000000>;
};
localbus {
compatible = "fsl,mpc5200b-lpb","fsl,mpc5200-lpb","simple-bus";
#address-cells = <2>;
#size-cells = <1>;
ranges = <0 0 0xff800000 0x00800000
1 0 0x80000000 0x00800000
3 0 0x80000000 0x00800000>;
flash@0,0 {
compatible = "cfi-flash";
reg = <0 0 0x00800000>;
bank-width = <4>;
device-width = <2>;
#size-cells = <1>;
#address-cells = <1>;
partition@0 {
label = "DTS";
reg = <0x0 0x00100000>;
};
partition@100000 {
label = "Kernel";
reg = <0x100000 0x00200000>;
};
partition@300000 {
label = "RootFS";
reg = <0x00300000 0x00200000>;
};
partition@500000 {
label = "user";
reg = <0x00500000 0x00200000>;
};
partition@700000 {
label = "U-Boot";
reg = <0x00700000 0x00040000>;
};
partition@740000 {
label = "Env";
reg = <0x00740000 0x00020000>;
};
partition@760000 {
label = "red. Env";
reg = <0x00760000 0x00020000>;
};
partition@780000 {
label = "reserve";
reg = <0x00780000 0x00080000>;
};
};
simple100: gpio-controller-100@3,600100 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600100 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple104: gpio-controller-104@3,600104 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600104 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple200: gpio-controller-200@3,600200 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600200 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple201: gpio-controller-201@3,600201 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600201 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple202: gpio-controller-202@3,600202 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600202 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple203: gpio-controller-203@3,600203 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600203 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple204: gpio-controller-204@3,600204 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600204 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple206: gpio-controller-206@3,600206 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600206 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple207: gpio-controller-207@3,600207 {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x00600207 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
simple20f: gpio-controller-20f@3,60020f {
compatible = "manroland,mucmc52-aux-gpio";
reg = <3 0x0060020f 0x1>;
gpio-controller;
#gpio-cells = <2>;
};
};
};
