scsi_dh_emc.c
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Target driver for EMC CLARiiON AX/CX-series hardware.
* Based on code from Lars Marowsky-Bree <lmb@suse.de>
* and Ed Goggin <egoggin@emc.com>.
*
* Copyright (C) 2006 Red Hat, Inc. All rights reserved.
* Copyright (C) 2006 Mike Christie
*/
#include <linux/slab.h>
#include <linux/module.h>
#include <scsi/scsi.h>
#include <scsi/scsi_eh.h>
#include <scsi/scsi_dh.h>
#include <scsi/scsi_device.h>
#define CLARIION_NAME "emc"
#define CLARIION_TRESPASS_PAGE 0x22
#define CLARIION_BUFFER_SIZE 0xFC
#define CLARIION_TIMEOUT (60 * HZ)
#define CLARIION_RETRIES 3
#define CLARIION_UNBOUND_LU -1
#define CLARIION_SP_A 0
#define CLARIION_SP_B 1
/* Flags */
#define CLARIION_SHORT_TRESPASS 1
#define CLARIION_HONOR_RESERVATIONS 2
/* LUN states */
#define CLARIION_LUN_UNINITIALIZED -1
#define CLARIION_LUN_UNBOUND 0
#define CLARIION_LUN_BOUND 1
#define CLARIION_LUN_OWNED 2
static unsigned char long_trespass[] = {
0, 0, 0, 0, 0, 0, 0, 0,
CLARIION_TRESPASS_PAGE, /* Page code */
0x09, /* Page length - 2 */
0x01, /* Trespass code */
0xff, 0xff, /* Trespass target */
0, 0, 0, 0, 0, 0 /* Reserved bytes / unknown */
};
static unsigned char short_trespass[] = {
0, 0, 0, 0,
CLARIION_TRESPASS_PAGE, /* Page code */
0x02, /* Page length - 2 */
0x01, /* Trespass code */
0xff, /* Trespass target */
};
static const char * lun_state[] =
{
"not bound",
"bound",
"owned",
};
struct clariion_dh_data {
/*
* Flags:
* CLARIION_SHORT_TRESPASS
* Use short trespass command (FC-series) or the long version
* (default for AX/CX CLARiiON arrays).
*
* CLARIION_HONOR_RESERVATIONS
* Whether or not (default) to honor SCSI reservations when
* initiating a switch-over.
*/
unsigned flags;
/*
* I/O buffer for both MODE_SELECT and INQUIRY commands.
*/
unsigned char buffer[CLARIION_BUFFER_SIZE];
/*
* LUN state
*/
int lun_state;
/*
* SP Port number
*/
int port;
/*
* which SP (A=0,B=1,UNBOUND=-1) is the default SP for this
* path's mapped LUN
*/
int default_sp;
/*
* which SP (A=0,B=1,UNBOUND=-1) is the active SP for this
* path's mapped LUN
*/
int current_sp;
};
/*
* Parse MODE_SELECT cmd reply.
*/
static int trespass_endio(struct scsi_device *sdev,
struct scsi_sense_hdr *sshdr)
{
int err = SCSI_DH_IO;
sdev_printk(KERN_ERR, sdev, "%s: Found valid sense data 0x%2x, "
"0x%2x, 0x%2x while sending CLARiiON trespass "
"command.\n", CLARIION_NAME, sshdr->sense_key,
sshdr->asc, sshdr->ascq);
if (sshdr->sense_key == 0x05 && sshdr->asc == 0x04 &&
sshdr->ascq == 0x00) {
/*
* Array based copy in progress -- do not send
* mode_select or copy will be aborted mid-stream.
*/
sdev_printk(KERN_INFO, sdev, "%s: Array Based Copy in "
"progress while sending CLARiiON trespass "
"command.\n", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
} else if (sshdr->sense_key == 0x02 && sshdr->asc == 0x04 &&
sshdr->ascq == 0x03) {
/*
* LUN Not Ready - Manual Intervention Required
* indicates in-progress ucode upgrade (NDU).
*/
sdev_printk(KERN_INFO, sdev, "%s: Detected in-progress "
"ucode upgrade NDU operation while sending "
"CLARiiON trespass command.\n", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
} else
err = SCSI_DH_DEV_FAILED;
return err;
}
static int parse_sp_info_reply(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
int err = SCSI_DH_OK;
/* check for in-progress ucode upgrade (NDU) */
if (csdev->buffer[48] != 0) {
sdev_printk(KERN_NOTICE, sdev, "%s: Detected in-progress "
"ucode upgrade NDU operation while finding "
"current active SP.", CLARIION_NAME);
err = SCSI_DH_DEV_TEMP_BUSY;
goto out;
}
if (csdev->buffer[4] > 2) {
/* Invalid buffer format */
sdev_printk(KERN_NOTICE, sdev,
"%s: invalid VPD page 0xC0 format\n",
CLARIION_NAME);
err = SCSI_DH_NOSYS;
goto out;
}
switch (csdev->buffer[28] & 0x0f) {
case 6:
sdev_printk(KERN_NOTICE, sdev,
"%s: ALUA failover mode detected\n",
CLARIION_NAME);
break;
case 4:
/* Linux failover */
break;
default:
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid failover mode %d\n",
CLARIION_NAME, csdev->buffer[28] & 0x0f);
err = SCSI_DH_NOSYS;
goto out;
}
csdev->default_sp = csdev->buffer[5];
csdev->lun_state = csdev->buffer[4];
csdev->current_sp = csdev->buffer[8];
csdev->port = csdev->buffer[7];
if (csdev->lun_state == CLARIION_LUN_OWNED)
sdev->access_state = SCSI_ACCESS_STATE_OPTIMAL;
else
sdev->access_state = SCSI_ACCESS_STATE_STANDBY;
if (csdev->default_sp == csdev->current_sp)
sdev->access_state |= SCSI_ACCESS_STATE_PREFERRED;
out:
return err;
}
#define emc_default_str "FC (Legacy)"
static char * parse_sp_model(struct scsi_device *sdev, unsigned char *buffer)
{
unsigned char len = buffer[4] + 5;
char *sp_model = NULL;
unsigned char sp_len, serial_len;
if (len < 160) {
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid information section length %d\n",
CLARIION_NAME, len);
/* Check for old FC arrays */
if (!strncmp(buffer + 8, "DGC", 3)) {
/* Old FC array, not supporting extended information */
sp_model = emc_default_str;
}
goto out;
}
/*
* Parse extended information for SP model number
*/
serial_len = buffer[160];
if (serial_len == 0 || serial_len + 161 > len) {
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid array serial number length %d\n",
CLARIION_NAME, serial_len);
goto out;
}
sp_len = buffer[99];
if (sp_len == 0 || serial_len + sp_len + 161 > len) {
sdev_printk(KERN_WARNING, sdev,
"%s: Invalid model number length %d\n",
CLARIION_NAME, sp_len);
goto out;
}
sp_model = &buffer[serial_len + 161];
/* Strip whitespace at the end */
while (sp_len > 1 && sp_model[sp_len - 1] == ' ')
sp_len--;
sp_model[sp_len] = '\0';
out:
return sp_model;
}
static int send_trespass_cmd(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
unsigned char *page22;
unsigned char cdb[MAX_COMMAND_SIZE];
int err, res = SCSI_DH_OK, len;
struct scsi_sense_hdr sshdr;
u64 req_flags = REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT |
REQ_FAILFAST_DRIVER;
if (csdev->flags & CLARIION_SHORT_TRESPASS) {
page22 = short_trespass;
if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
/* Set Honor Reservations bit */
page22[6] |= 0x80;
len = sizeof(short_trespass);
cdb[0] = MODE_SELECT;
cdb[1] = 0x10;
cdb[4] = len;
} else {
page22 = long_trespass;
if (!(csdev->flags & CLARIION_HONOR_RESERVATIONS))
/* Set Honor Reservations bit */
page22[10] |= 0x80;
len = sizeof(long_trespass);
cdb[0] = MODE_SELECT_10;
cdb[8] = len;
}
BUG_ON((len > CLARIION_BUFFER_SIZE));
memcpy(csdev->buffer, page22, len);
err = scsi_execute(sdev, cdb, DMA_TO_DEVICE, csdev->buffer, len, NULL,
&sshdr, CLARIION_TIMEOUT * HZ, CLARIION_RETRIES,
req_flags, 0, NULL);
if (err) {
if (scsi_sense_valid(&sshdr))
res = trespass_endio(sdev, &sshdr);
else {
sdev_printk(KERN_INFO, sdev,
"%s: failed to send MODE SELECT: %x\n",
CLARIION_NAME, err);
res = SCSI_DH_IO;
}
}
return res;
}
static enum scsi_disposition clariion_check_sense(struct scsi_device *sdev,
struct scsi_sense_hdr *sense_hdr)
{
switch (sense_hdr->sense_key) {
case NOT_READY:
if (sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x03)
/*
* LUN Not Ready - Manual Intervention Required
* indicates this is a passive path.
*
* FIXME: However, if this is seen and EVPD C0
* indicates that this is due to a NDU in
* progress, we should set FAIL_PATH too.
* This indicates we might have to do a SCSI
* inquiry in the end_io path. Ugh.
*
* Can return FAILED only when we want the error
* recovery process to kick in.
*/
return SUCCESS;
break;
case ILLEGAL_REQUEST:
if (sense_hdr->asc == 0x25 && sense_hdr->ascq == 0x01)
/*
* An array based copy is in progress. Do not
* fail the path, do not bypass to another PG,
* do not retry. Fail the IO immediately.
* (Actually this is the same conclusion as in
* the default handler, but lets make sure.)
*
* Can return FAILED only when we want the error
* recovery process to kick in.
*/
return SUCCESS;
break;
case UNIT_ATTENTION:
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
/*
* Unit Attention Code. This is the first IO
* to the new path, so just retry.
*/
return ADD_TO_MLQUEUE;
break;
}
return SCSI_RETURN_NOT_HANDLED;
}
static blk_status_t clariion_prep_fn(struct scsi_device *sdev,
struct request *req)
{
struct clariion_dh_data *h = sdev->handler_data;
if (h->lun_state != CLARIION_LUN_OWNED) {
req->rq_flags |= RQF_QUIET;
return BLK_STS_IOERR;
}
return BLK_STS_OK;
}
static int clariion_std_inquiry(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
int err = SCSI_DH_OK;
char *sp_model;
sp_model = parse_sp_model(sdev, sdev->inquiry);
if (!sp_model) {
err = SCSI_DH_DEV_UNSUPP;
goto out;
}
/*
* FC Series arrays do not support long trespass
*/
if (!strlen(sp_model) || !strncmp(sp_model, "FC",2))
csdev->flags |= CLARIION_SHORT_TRESPASS;
sdev_printk(KERN_INFO, sdev,
"%s: detected Clariion %s, flags %x\n",
CLARIION_NAME, sp_model, csdev->flags);
out:
return err;
}
static int clariion_send_inquiry(struct scsi_device *sdev,
struct clariion_dh_data *csdev)
{
int err = SCSI_DH_IO;
if (!scsi_get_vpd_page(sdev, 0xC0, csdev->buffer,
CLARIION_BUFFER_SIZE))
err = parse_sp_info_reply(sdev, csdev);
return err;
}
static int clariion_activate(struct scsi_device *sdev,
activate_complete fn, void *data)
{
struct clariion_dh_data *csdev = sdev->handler_data;
int result;
result = clariion_send_inquiry(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
if (csdev->lun_state == CLARIION_LUN_OWNED)
goto done;
result = send_trespass_cmd(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
sdev_printk(KERN_INFO, sdev,"%s: %s trespass command sent\n",
CLARIION_NAME,
csdev->flags&CLARIION_SHORT_TRESPASS?"short":"long" );
/* Update status */
result = clariion_send_inquiry(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
done:
sdev_printk(KERN_INFO, sdev,
"%s: at SP %c Port %d (%s, default SP %c)\n",
CLARIION_NAME, csdev->current_sp + 'A',
csdev->port, lun_state[csdev->lun_state],
csdev->default_sp + 'A');
if (fn)
fn(data, result);
return 0;
}
/*
* params - parameters in the following format
* "no_of_params\0param1\0param2\0param3\0...\0"
* for example, string for 2 parameters with value 10 and 21
* is specified as "2\010\021\0".
*/
static int clariion_set_params(struct scsi_device *sdev, const char *params)
{
struct clariion_dh_data *csdev = sdev->handler_data;
unsigned int hr = 0, st = 0, argc;
const char *p = params;
int result = SCSI_DH_OK;
if ((sscanf(params, "%u", &argc) != 1) || (argc != 2))
return -EINVAL;
while (*p++)
;
if ((sscanf(p, "%u", &st) != 1) || (st > 1))
return -EINVAL;
while (*p++)
;
if ((sscanf(p, "%u", &hr) != 1) || (hr > 1))
return -EINVAL;
if (st)
csdev->flags |= CLARIION_SHORT_TRESPASS;
else
csdev->flags &= ~CLARIION_SHORT_TRESPASS;
if (hr)
csdev->flags |= CLARIION_HONOR_RESERVATIONS;
else
csdev->flags &= ~CLARIION_HONOR_RESERVATIONS;
/*
* If this path is owned, we have to send a trespass command
* with the new parameters. If not, simply return. Next trespass
* command would use the parameters.
*/
if (csdev->lun_state != CLARIION_LUN_OWNED)
goto done;
csdev->lun_state = CLARIION_LUN_UNINITIALIZED;
result = send_trespass_cmd(sdev, csdev);
if (result != SCSI_DH_OK)
goto done;
/* Update status */
result = clariion_send_inquiry(sdev, csdev);
done:
return result;
}
static int clariion_bus_attach(struct scsi_device *sdev)
{
struct clariion_dh_data *h;
int err;
h = kzalloc(sizeof(*h) , GFP_KERNEL);
if (!h)
return SCSI_DH_NOMEM;
h->lun_state = CLARIION_LUN_UNINITIALIZED;
h->default_sp = CLARIION_UNBOUND_LU;
h->current_sp = CLARIION_UNBOUND_LU;
err = clariion_std_inquiry(sdev, h);
if (err != SCSI_DH_OK)
goto failed;
err = clariion_send_inquiry(sdev, h);
if (err != SCSI_DH_OK)
goto failed;
sdev_printk(KERN_INFO, sdev,
"%s: connected to SP %c Port %d (%s, default SP %c)\n",
CLARIION_NAME, h->current_sp + 'A',
h->port, lun_state[h->lun_state],
h->default_sp + 'A');
sdev->handler_data = h;
return SCSI_DH_OK;
failed:
kfree(h);
return err;
}
static void clariion_bus_detach(struct scsi_device *sdev)
{
kfree(sdev->handler_data);
sdev->handler_data = NULL;
}
static struct scsi_device_handler clariion_dh = {
.name = CLARIION_NAME,
.module = THIS_MODULE,
.attach = clariion_bus_attach,
.detach = clariion_bus_detach,
.check_sense = clariion_check_sense,
.activate = clariion_activate,
.prep_fn = clariion_prep_fn,
.set_params = clariion_set_params,
};
static int __init clariion_init(void)
{
int r;
r = scsi_register_device_handler(&clariion_dh);
if (r != 0)
printk(KERN_ERR "%s: Failed to register scsi device handler.",
CLARIION_NAME);
return r;
}
static void __exit clariion_exit(void)
{
scsi_unregister_device_handler(&clariion_dh);
}
module_init(clariion_init);
module_exit(clariion_exit);
MODULE_DESCRIPTION("EMC CX/AX/FC-family driver");
MODULE_AUTHOR("Mike Christie <michaelc@cs.wisc.edu>, Chandra Seetharaman <sekharan@us.ibm.com>");
MODULE_LICENSE("GPL");