vt_ioctl.c
/*
* linux/drivers/char/vt_ioctl.c
*
* Copyright (C) 1992 obz under the linux copyright
*
* Dynamic diacritical handling - aeb@cwi.nl - Dec 1993
* Dynamic keymap and string allocation - aeb@cwi.nl - May 1994
* Restrict VT switching via ioctl() - grif@cs.ucr.edu - Dec 1995
* Some code moved for less code duplication - Andi Kleen - Mar 1997
* Check put/get_user, cleanups - acme@conectiva.com.br - Jun 2001
*/
#include <linux/types.h>
#include <linux/errno.h>
#include <linux/sched.h>
#include <linux/tty.h>
#include <linux/timer.h>
#include <linux/kernel.h>
#include <linux/kd.h>
#include <linux/vt.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/console.h>
#include <linux/signal.h>
#include <linux/timex.h>
#include <asm/io.h>
#include <asm/uaccess.h>
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/kbd_diacr.h>
#include <linux/selection.h>
char vt_dont_switch;
extern struct tty_driver *console_driver;
#define VT_IS_IN_USE(i) (console_driver->ttys[i] && console_driver->ttys[i]->count)
#define VT_BUSY(i) (VT_IS_IN_USE(i) || i == fg_console || vc_cons[i].d == sel_cons)
/*
* Console (vt and kd) routines, as defined by USL SVR4 manual, and by
* experimentation and study of X386 SYSV handling.
*
* One point of difference: SYSV vt's are /dev/vtX, which X >= 0, and
* /dev/console is a separate ttyp. Under Linux, /dev/tty0 is /dev/console,
* and the vc start at /dev/ttyX, X >= 1. We maintain that here, so we will
* always treat our set of vt as numbered 1..MAX_NR_CONSOLES (corresponding to
* ttys 0..MAX_NR_CONSOLES-1). Explicitly naming VT 0 is illegal, but using
* /dev/tty0 (fg_console) as a target is legal, since an implicit aliasing
* to the current console is done by the main ioctl code.
*/
#ifdef CONFIG_X86
#include <linux/syscalls.h>
#endif
static void complete_change_console(struct vc_data *vc);
/*
* these are the valid i/o ports we're allowed to change. they map all the
* video ports
*/
#define GPFIRST 0x3b4
#define GPLAST 0x3df
#define GPNUM (GPLAST - GPFIRST + 1)
#define i (tmp.kb_index)
#define s (tmp.kb_table)
#define v (tmp.kb_value)
static inline int
do_kdsk_ioctl(int cmd, struct kbentry __user *user_kbe, int perm, struct kbd_struct *kbd)
{
struct kbentry tmp;
ushort *key_map, val, ov;
if (copy_from_user(&tmp, user_kbe, sizeof(struct kbentry)))
return -EFAULT;
if (!capable(CAP_SYS_TTY_CONFIG))
perm = 0;
switch (cmd) {
case KDGKBENT:
key_map = key_maps[s];
if (key_map) {
val = U(key_map[i]);
if (kbd->kbdmode != VC_UNICODE && KTYP(val) >= NR_TYPES)
val = K_HOLE;
} else
val = (i ? K_HOLE : K_NOSUCHMAP);
return put_user(val, &user_kbe->kb_value);
case KDSKBENT:
if (!perm)
return -EPERM;
if (!i && v == K_NOSUCHMAP) {
/* deallocate map */
key_map = key_maps[s];
if (s && key_map) {
key_maps[s] = NULL;
if (key_map[0] == U(K_ALLOCATED)) {
kfree(key_map);
keymap_count--;
}
}
break;
}
if (KTYP(v) < NR_TYPES) {
if (KVAL(v) > max_vals[KTYP(v)])
return -EINVAL;
} else
if (kbd->kbdmode != VC_UNICODE)
return -EINVAL;
/* ++Geert: non-PC keyboards may generate keycode zero */
#if !defined(__mc68000__) && !defined(__powerpc__)
/* assignment to entry 0 only tests validity of args */
if (!i)
break;
#endif
if (!(key_map = key_maps[s])) {
int j;
if (keymap_count >= MAX_NR_OF_USER_KEYMAPS &&
!capable(CAP_SYS_RESOURCE))
return -EPERM;
key_map = kmalloc(sizeof(plain_map),
GFP_KERNEL);
if (!key_map)
return -ENOMEM;
key_maps[s] = key_map;
key_map[0] = U(K_ALLOCATED);
for (j = 1; j < NR_KEYS; j++)
key_map[j] = U(K_HOLE);
keymap_count++;
}
ov = U(key_map[i]);
if (v == ov)
break; /* nothing to do */
/*
* Attention Key.
*/
if (((ov == K_SAK) || (v == K_SAK)) && !capable(CAP_SYS_ADMIN))
return -EPERM;
key_map[i] = U(v);
if (!s && (KTYP(ov) == KT_SHIFT || KTYP(v) == KT_SHIFT))
compute_shiftstate();
break;
}
return 0;
}
#undef i
#undef s
#undef v
static inline int
do_kbkeycode_ioctl(int cmd, struct kbkeycode __user *user_kbkc, int perm)
{
struct kbkeycode tmp;
int kc = 0;
if (copy_from_user(&tmp, user_kbkc, sizeof(struct kbkeycode)))
return -EFAULT;
switch (cmd) {
case KDGETKEYCODE:
kc = getkeycode(tmp.scancode);
if (kc >= 0)
kc = put_user(kc, &user_kbkc->keycode);
break;
case KDSETKEYCODE:
if (!perm)
return -EPERM;
kc = setkeycode(tmp.scancode, tmp.keycode);
break;
}
return kc;
}
static inline int
do_kdgkb_ioctl(int cmd, struct kbsentry __user *user_kdgkb, int perm)
{
struct kbsentry *kbs;
char *p;
u_char *q;
u_char __user *up;
int sz;
int delta;
char *first_free, *fj, *fnw;
int i, j, k;
int ret;
if (!capable(CAP_SYS_TTY_CONFIG))
perm = 0;
kbs = kmalloc(sizeof(*kbs), GFP_KERNEL);
if (!kbs) {
ret = -ENOMEM;
goto reterr;
}
/* we mostly copy too much here (512bytes), but who cares ;) */
if (copy_from_user(kbs, user_kdgkb, sizeof(struct kbsentry))) {
ret = -EFAULT;
goto reterr;
}
kbs->kb_string[sizeof(kbs->kb_string)-1] = '\0';
i = kbs->kb_func;
switch (cmd) {
case KDGKBSENT:
sz = sizeof(kbs->kb_string) - 1; /* sz should have been
a struct member */
up = user_kdgkb->kb_string;
p = func_table[i];
if(p)
for ( ; *p && sz; p++, sz--)
if (put_user(*p, up++)) {
ret = -EFAULT;
goto reterr;
}
if (put_user('\0', up)) {
ret = -EFAULT;
goto reterr;
}
kfree(kbs);
return ((p && *p) ? -EOVERFLOW : 0);
case KDSKBSENT:
if (!perm) {
ret = -EPERM;
goto reterr;
}
q = func_table[i];
first_free = funcbufptr + (funcbufsize - funcbufleft);
for (j = i+1; j < MAX_NR_FUNC && !func_table[j]; j++)
;
if (j < MAX_NR_FUNC)
fj = func_table[j];
else
fj = first_free;
delta = (q ? -strlen(q) : 1) + strlen(kbs->kb_string);
if (delta <= funcbufleft) { /* it fits in current buf */
if (j < MAX_NR_FUNC) {
memmove(fj + delta, fj, first_free - fj);
for (k = j; k < MAX_NR_FUNC; k++)
if (func_table[k])
func_table[k] += delta;
}
if (!q)
func_table[i] = fj;
funcbufleft -= delta;
} else { /* allocate a larger buffer */
sz = 256;
while (sz < funcbufsize - funcbufleft + delta)
sz <<= 1;
fnw = kmalloc(sz, GFP_KERNEL);
if(!fnw) {
ret = -ENOMEM;
goto reterr;
}
if (!q)
func_table[i] = fj;
if (fj > funcbufptr)
memmove(fnw, funcbufptr, fj - funcbufptr);
for (k = 0; k < j; k++)
if (func_table[k])
func_table[k] = fnw + (func_table[k] - funcbufptr);
if (first_free > fj) {
memmove(fnw + (fj - funcbufptr) + delta, fj, first_free - fj);
for (k = j; k < MAX_NR_FUNC; k++)
if (func_table[k])
func_table[k] = fnw + (func_table[k] - funcbufptr) + delta;
}
if (funcbufptr != func_buf)
kfree(funcbufptr);
funcbufptr = fnw;
funcbufleft = funcbufleft - delta + sz - funcbufsize;
funcbufsize = sz;
}
strcpy(func_table[i], kbs->kb_string);
break;
}
ret = 0;
reterr:
kfree(kbs);
return ret;
}
static inline int
do_fontx_ioctl(int cmd, struct consolefontdesc __user *user_cfd, int perm, struct console_font_op *op)
{
struct consolefontdesc cfdarg;
int i;
if (copy_from_user(&cfdarg, user_cfd, sizeof(struct consolefontdesc)))
return -EFAULT;
switch (cmd) {
case PIO_FONTX:
if (!perm)
return -EPERM;
op->op = KD_FONT_OP_SET;
op->flags = KD_FONT_FLAG_OLD;
op->width = 8;
op->height = cfdarg.charheight;
op->charcount = cfdarg.charcount;
op->data = cfdarg.chardata;
return con_font_op(vc_cons[fg_console].d, op);
case GIO_FONTX: {
op->op = KD_FONT_OP_GET;
op->flags = KD_FONT_FLAG_OLD;
op->width = 8;
op->height = cfdarg.charheight;
op->charcount = cfdarg.charcount;
op->data = cfdarg.chardata;
i = con_font_op(vc_cons[fg_console].d, op);
if (i)
return i;
cfdarg.charheight = op->height;
cfdarg.charcount = op->charcount;
if (copy_to_user(user_cfd, &cfdarg, sizeof(struct consolefontdesc)))
return -EFAULT;
return 0;
}
}
return -EINVAL;
}
static inline int
do_unimap_ioctl(int cmd, struct unimapdesc __user *user_ud, int perm, struct vc_data *vc)
{
struct unimapdesc tmp;
if (copy_from_user(&tmp, user_ud, sizeof tmp))
return -EFAULT;
if (tmp.entries)
if (!access_ok(VERIFY_WRITE, tmp.entries,
tmp.entry_ct*sizeof(struct unipair)))
return -EFAULT;
switch (cmd) {
case PIO_UNIMAP:
if (!perm)
return -EPERM;
return con_set_unimap(vc, tmp.entry_ct, tmp.entries);
case GIO_UNIMAP:
if (!perm && fg_console != vc->vc_num)
return -EPERM;
return con_get_unimap(vc, tmp.entry_ct, &(user_ud->entry_ct), tmp.entries);
}
return 0;
}
/*
* We handle the console-specific ioctl's here. We allow the
* capability to modify any console, not just the fg_console.
*/
int vt_ioctl(struct tty_struct *tty, struct file * file,
unsigned int cmd, unsigned long arg)
{
struct vc_data *vc = (struct vc_data *)tty->driver_data;
struct console_font_op op; /* used in multiple places here */
struct kbd_struct * kbd;
unsigned int console;
unsigned char ucval;
void __user *up = (void __user *)arg;
int i, perm;
console = vc->vc_num;
if (!vc_cons_allocated(console)) /* impossible? */
return -ENOIOCTLCMD;
/*
* To have permissions to do most of the vt ioctls, we either have
* to be the owner of the tty, or have CAP_SYS_TTY_CONFIG.
*/
perm = 0;
if (current->signal->tty == tty || capable(CAP_SYS_TTY_CONFIG))
perm = 1;
kbd = kbd_table + console;
switch (cmd) {
case KIOCSOUND:
if (!perm)
return -EPERM;
if (arg)
arg = CLOCK_TICK_RATE / arg;
kd_mksound(arg, 0);
return 0;
case KDMKTONE:
if (!perm)
return -EPERM;
{
unsigned int ticks, count;
/*
* Generate the tone for the appropriate number of ticks.
* If the time is zero, turn off sound ourselves.
*/
ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
count = ticks ? (arg & 0xffff) : 0;
if (count)
count = CLOCK_TICK_RATE / count;
kd_mksound(count, ticks);
return 0;
}
case KDGKBTYPE:
/*
* this is naive.
*/
ucval = KB_101;
goto setchar;
/*
* These cannot be implemented on any machine that implements
* ioperm() in user level (such as Alpha PCs) or not at all.
*
* XXX: you should never use these, just call ioperm directly..
*/
#ifdef CONFIG_X86
case KDADDIO:
case KDDELIO:
/*
* KDADDIO and KDDELIO may be able to add ports beyond what
* we reject here, but to be safe...
*/
if (arg < GPFIRST || arg > GPLAST)
return -EINVAL;
return sys_ioperm(arg, 1, (cmd == KDADDIO)) ? -ENXIO : 0;
case KDENABIO:
case KDDISABIO:
return sys_ioperm(GPFIRST, GPNUM,
(cmd == KDENABIO)) ? -ENXIO : 0;
#endif
/* Linux m68k/i386 interface for setting the keyboard delay/repeat rate */
case KDKBDREP:
{
struct kbd_repeat kbrep;
int err;
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
if (copy_from_user(&kbrep, up, sizeof(struct kbd_repeat)))
return -EFAULT;
err = kbd_rate(&kbrep);
if (err)
return err;
if (copy_to_user(up, &kbrep, sizeof(struct kbd_repeat)))
return -EFAULT;
return 0;
}
case KDSETMODE:
/*
* currently, setting the mode from KD_TEXT to KD_GRAPHICS
* doesn't do a whole lot. i'm not sure if it should do any
* restoration of modes or what...
*
* XXX It should at least call into the driver, fbdev's definitely
* need to restore their engine state. --BenH
*/
if (!perm)
return -EPERM;
switch (arg) {
case KD_GRAPHICS:
break;
case KD_TEXT0:
case KD_TEXT1:
arg = KD_TEXT;
case KD_TEXT:
break;
default:
return -EINVAL;
}
if (vc->vc_mode == (unsigned char) arg)
return 0;
vc->vc_mode = (unsigned char) arg;
if (console != fg_console)
return 0;
/*
* explicitly blank/unblank the screen if switching modes
*/
acquire_console_sem();
if (arg == KD_TEXT)
do_unblank_screen(1);
else
do_blank_screen(1);
release_console_sem();
return 0;
case KDGETMODE:
ucval = vc->vc_mode;
goto setint;
case KDMAPDISP:
case KDUNMAPDISP:
/*
* these work like a combination of mmap and KDENABIO.
* this could be easily finished.
*/
return -EINVAL;
case KDSKBMODE:
if (!perm)
return -EPERM;
switch(arg) {
case K_RAW:
kbd->kbdmode = VC_RAW;
break;
case K_MEDIUMRAW:
kbd->kbdmode = VC_MEDIUMRAW;
break;
case K_XLATE:
kbd->kbdmode = VC_XLATE;
compute_shiftstate();
break;
case K_UNICODE:
kbd->kbdmode = VC_UNICODE;
compute_shiftstate();
break;
default:
return -EINVAL;
}
tty_ldisc_flush(tty);
return 0;
case KDGKBMODE:
ucval = ((kbd->kbdmode == VC_RAW) ? K_RAW :
(kbd->kbdmode == VC_MEDIUMRAW) ? K_MEDIUMRAW :
(kbd->kbdmode == VC_UNICODE) ? K_UNICODE :
K_XLATE);
goto setint;
/* this could be folded into KDSKBMODE, but for compatibility
reasons it is not so easy to fold KDGKBMETA into KDGKBMODE */
case KDSKBMETA:
switch(arg) {
case K_METABIT:
clr_vc_kbd_mode(kbd, VC_META);
break;
case K_ESCPREFIX:
set_vc_kbd_mode(kbd, VC_META);
break;
default:
return -EINVAL;
}
return 0;
case KDGKBMETA:
ucval = (vc_kbd_mode(kbd, VC_META) ? K_ESCPREFIX : K_METABIT);
setint:
return put_user(ucval, (int __user *)arg);
case KDGETKEYCODE:
case KDSETKEYCODE:
if(!capable(CAP_SYS_TTY_CONFIG))
perm=0;
return do_kbkeycode_ioctl(cmd, up, perm);
case KDGKBENT:
case KDSKBENT:
return do_kdsk_ioctl(cmd, up, perm, kbd);
case KDGKBSENT:
case KDSKBSENT:
return do_kdgkb_ioctl(cmd, up, perm);
case KDGKBDIACR:
{
struct kbdiacrs __user *a = up;
if (put_user(accent_table_size, &a->kb_cnt))
return -EFAULT;
if (copy_to_user(a->kbdiacr, accent_table, accent_table_size*sizeof(struct kbdiacr)))
return -EFAULT;
return 0;
}
case KDSKBDIACR:
{
struct kbdiacrs __user *a = up;
unsigned int ct;
if (!perm)
return -EPERM;
if (get_user(ct,&a->kb_cnt))
return -EFAULT;
if (ct >= MAX_DIACR)
return -EINVAL;
accent_table_size = ct;
if (copy_from_user(accent_table, a->kbdiacr, ct*sizeof(struct kbdiacr)))
return -EFAULT;
return 0;
}
/* the ioctls below read/set the flags usually shown in the leds */
/* don't use them - they will go away without warning */
case KDGKBLED:
ucval = kbd->ledflagstate | (kbd->default_ledflagstate << 4);
goto setchar;
case KDSKBLED:
if (!perm)
return -EPERM;
if (arg & ~0x77)
return -EINVAL;
kbd->ledflagstate = (arg & 7);
kbd->default_ledflagstate = ((arg >> 4) & 7);
set_leds();
return 0;
/* the ioctls below only set the lights, not the functions */
/* for those, see KDGKBLED and KDSKBLED above */
case KDGETLED:
ucval = getledstate();
setchar:
return put_user(ucval, (char __user *)arg);
case KDSETLED:
if (!perm)
return -EPERM;
setledstate(kbd, arg);
return 0;
/*
* A process can indicate its willingness to accept signals
* generated by pressing an appropriate key combination.
* Thus, one can have a daemon that e.g. spawns a new console
* upon a keypress and then changes to it.
* See also the kbrequest field of inittab(5).
*/
case KDSIGACCEPT:
{
if (!perm || !capable(CAP_KILL))
return -EPERM;
if (!valid_signal(arg) || arg < 1 || arg == SIGKILL)
return -EINVAL;
spin_lock_irq(&vt_spawn_con.lock);
put_pid(vt_spawn_con.pid);
vt_spawn_con.pid = get_pid(task_pid(current));
vt_spawn_con.sig = arg;
spin_unlock_irq(&vt_spawn_con.lock);
return 0;
}
case VT_SETMODE:
{
struct vt_mode tmp;
if (!perm)
return -EPERM;
if (copy_from_user(&tmp, up, sizeof(struct vt_mode)))
return -EFAULT;
if (tmp.mode != VT_AUTO && tmp.mode != VT_PROCESS)
return -EINVAL;
acquire_console_sem();
vc->vt_mode = tmp;
/* the frsig is ignored, so we set it to 0 */
vc->vt_mode.frsig = 0;
put_pid(vc->vt_pid);
vc->vt_pid = get_pid(task_pid(current));
/* no switch is required -- saw@shade.msu.ru */
vc->vt_newvt = -1;
release_console_sem();
return 0;
}
case VT_GETMODE:
{
struct vt_mode tmp;
int rc;
acquire_console_sem();
memcpy(&tmp, &vc->vt_mode, sizeof(struct vt_mode));
release_console_sem();
rc = copy_to_user(up, &tmp, sizeof(struct vt_mode));
return rc ? -EFAULT : 0;
}
/*
* Returns global vt state. Note that VT 0 is always open, since
* it's an alias for the current VT, and people can't use it here.
* We cannot return state for more than 16 VTs, since v_state is short.
*/
case VT_GETSTATE:
{
struct vt_stat __user *vtstat = up;
unsigned short state, mask;
if (put_user(fg_console + 1, &vtstat->v_active))
return -EFAULT;
state = 1; /* /dev/tty0 is always open */
for (i = 0, mask = 2; i < MAX_NR_CONSOLES && mask; ++i, mask <<= 1)
if (VT_IS_IN_USE(i))
state |= mask;
return put_user(state, &vtstat->v_state);
}
/*
* Returns the first available (non-opened) console.
*/
case VT_OPENQRY:
for (i = 0; i < MAX_NR_CONSOLES; ++i)
if (! VT_IS_IN_USE(i))
break;
ucval = i < MAX_NR_CONSOLES ? (i+1) : -1;
goto setint;
/*
* ioctl(fd, VT_ACTIVATE, num) will cause us to switch to vt # num,
* with num >= 1 (switches to vt 0, our console, are not allowed, just
* to preserve sanity).
*/
case VT_ACTIVATE:
if (!perm)
return -EPERM;
if (arg == 0 || arg > MAX_NR_CONSOLES)
return -ENXIO;
arg--;
acquire_console_sem();
i = vc_allocate(arg);
release_console_sem();
if (i)
return i;
set_console(arg);
return 0;
/*
* wait until the specified VT has been activated
*/
case VT_WAITACTIVE:
if (!perm)
return -EPERM;
if (arg == 0 || arg > MAX_NR_CONSOLES)
return -ENXIO;
return vt_waitactive(arg-1);
/*
* If a vt is under process control, the kernel will not switch to it
* immediately, but postpone the operation until the process calls this
* ioctl, allowing the switch to complete.
*
* According to the X sources this is the behavior:
* 0: pending switch-from not OK
* 1: pending switch-from OK
* 2: completed switch-to OK
*/
case VT_RELDISP:
if (!perm)
return -EPERM;
if (vc->vt_mode.mode != VT_PROCESS)
return -EINVAL;
/*
* Switching-from response
*/
if (vc->vt_newvt >= 0) {
if (arg == 0)
/*
* Switch disallowed, so forget we were trying
* to do it.
*/
vc->vt_newvt = -1;
else {
/*
* The current vt has been released, so
* complete the switch.
*/
int newvt;
acquire_console_sem();
newvt = vc->vt_newvt;
vc->vt_newvt = -1;
i = vc_allocate(newvt);
if (i) {
release_console_sem();
return i;
}
/*
* When we actually do the console switch,
* make sure we are atomic with respect to
* other console switches..
*/
complete_change_console(vc_cons[newvt].d);
release_console_sem();
}
}
/*
* Switched-to response
*/
else
{
/*
* If it's just an ACK, ignore it
*/
if (arg != VT_ACKACQ)
return -EINVAL;
}
return 0;
/*
* Disallocate memory associated to VT (but leave VT1)
*/
case VT_DISALLOCATE:
if (arg > MAX_NR_CONSOLES)
return -ENXIO;
if (arg == 0) {
/* deallocate all unused consoles, but leave 0 */
acquire_console_sem();
for (i=1; i<MAX_NR_CONSOLES; i++)
if (! VT_BUSY(i))
vc_deallocate(i);
release_console_sem();
} else {
/* deallocate a single console, if possible */
arg--;
if (VT_BUSY(arg))
return -EBUSY;
if (arg) { /* leave 0 */
acquire_console_sem();
vc_deallocate(arg);
release_console_sem();
}
}
return 0;
case VT_RESIZE:
{
struct vt_sizes __user *vtsizes = up;
ushort ll,cc;
if (!perm)
return -EPERM;
if (get_user(ll, &vtsizes->v_rows) ||
get_user(cc, &vtsizes->v_cols))
return -EFAULT;
for (i = 0; i < MAX_NR_CONSOLES; i++)
vc_lock_resize(vc_cons[i].d, cc, ll);
return 0;
}
case VT_RESIZEX:
{
struct vt_consize __user *vtconsize = up;
ushort ll,cc,vlin,clin,vcol,ccol;
if (!perm)
return -EPERM;
if (!access_ok(VERIFY_READ, vtconsize,
sizeof(struct vt_consize)))
return -EFAULT;
__get_user(ll, &vtconsize->v_rows);
__get_user(cc, &vtconsize->v_cols);
__get_user(vlin, &vtconsize->v_vlin);
__get_user(clin, &vtconsize->v_clin);
__get_user(vcol, &vtconsize->v_vcol);
__get_user(ccol, &vtconsize->v_ccol);
vlin = vlin ? vlin : vc->vc_scan_lines;
if (clin) {
if (ll) {
if (ll != vlin/clin)
return -EINVAL; /* Parameters don't add up */
} else
ll = vlin/clin;
}
if (vcol && ccol) {
if (cc) {
if (cc != vcol/ccol)
return -EINVAL;
} else
cc = vcol/ccol;
}
if (clin > 32)
return -EINVAL;
for (i = 0; i < MAX_NR_CONSOLES; i++) {
if (!vc_cons[i].d)
continue;
acquire_console_sem();
if (vlin)
vc_cons[i].d->vc_scan_lines = vlin;
if (clin)
vc_cons[i].d->vc_font.height = clin;
vc_resize(vc_cons[i].d, cc, ll);
release_console_sem();
}
return 0;
}
case PIO_FONT: {
if (!perm)
return -EPERM;
op.op = KD_FONT_OP_SET;
op.flags = KD_FONT_FLAG_OLD | KD_FONT_FLAG_DONT_RECALC; /* Compatibility */
op.width = 8;
op.height = 0;
op.charcount = 256;
op.data = up;
return con_font_op(vc_cons[fg_console].d, &op);
}
case GIO_FONT: {
op.op = KD_FONT_OP_GET;
op.flags = KD_FONT_FLAG_OLD;
op.width = 8;
op.height = 32;
op.charcount = 256;
op.data = up;
return con_font_op(vc_cons[fg_console].d, &op);
}
case PIO_CMAP:
if (!perm)
return -EPERM;
return con_set_cmap(up);
case GIO_CMAP:
return con_get_cmap(up);
case PIO_FONTX:
case GIO_FONTX:
return do_fontx_ioctl(cmd, up, perm, &op);
case PIO_FONTRESET:
{
if (!perm)
return -EPERM;
#ifdef BROKEN_GRAPHICS_PROGRAMS
/* With BROKEN_GRAPHICS_PROGRAMS defined, the default
font is not saved. */
return -ENOSYS;
#else
{
op.op = KD_FONT_OP_SET_DEFAULT;
op.data = NULL;
i = con_font_op(vc_cons[fg_console].d, &op);
if (i)
return i;
con_set_default_unimap(vc_cons[fg_console].d);
return 0;
}
#endif
}
case KDFONTOP: {
if (copy_from_user(&op, up, sizeof(op)))
return -EFAULT;
if (!perm && op.op != KD_FONT_OP_GET)
return -EPERM;
i = con_font_op(vc, &op);
if (i) return i;
if (copy_to_user(up, &op, sizeof(op)))
return -EFAULT;
return 0;
}
case PIO_SCRNMAP:
if (!perm)
return -EPERM;
return con_set_trans_old(up);
case GIO_SCRNMAP:
return con_get_trans_old(up);
case PIO_UNISCRNMAP:
if (!perm)
return -EPERM;
return con_set_trans_new(up);
case GIO_UNISCRNMAP:
return con_get_trans_new(up);
case PIO_UNIMAPCLR:
{ struct unimapinit ui;
if (!perm)
return -EPERM;
i = copy_from_user(&ui, up, sizeof(struct unimapinit));
if (i) return -EFAULT;
con_clear_unimap(vc, &ui);
return 0;
}
case PIO_UNIMAP:
case GIO_UNIMAP:
return do_unimap_ioctl(cmd, up, perm, vc);
case VT_LOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
vt_dont_switch = 1;
return 0;
case VT_UNLOCKSWITCH:
if (!capable(CAP_SYS_TTY_CONFIG))
return -EPERM;
vt_dont_switch = 0;
return 0;
case VT_GETHIFONTMASK:
return put_user(vc->vc_hi_font_mask, (unsigned short __user *)arg);
default:
return -ENOIOCTLCMD;
}
}
/*
* Sometimes we want to wait until a particular VT has been activated. We
* do it in a very simple manner. Everybody waits on a single queue and
* get woken up at once. Those that are satisfied go on with their business,
* while those not ready go back to sleep. Seems overkill to add a wait
* to each vt just for this - usually this does nothing!
*/
static DECLARE_WAIT_QUEUE_HEAD(vt_activate_queue);
/*
* Sleeps until a vt is activated, or the task is interrupted. Returns
* 0 if activation, -EINTR if interrupted.
*/
int vt_waitactive(int vt)
{
int retval;
DECLARE_WAITQUEUE(wait, current);
add_wait_queue(&vt_activate_queue, &wait);
for (;;) {
retval = 0;
/*
* Synchronize with redraw_screen(). By acquiring the console
* semaphore we make sure that the console switch is completed
* before we return. If we didn't wait for the semaphore, we
* could return at a point where fg_console has already been
* updated, but the console switch hasn't been completed.
*/
acquire_console_sem();
set_current_state(TASK_INTERRUPTIBLE);
if (vt == fg_console) {
release_console_sem();
break;
}
release_console_sem();
retval = -EINTR;
if (signal_pending(current))
break;
schedule();
}
remove_wait_queue(&vt_activate_queue, &wait);
__set_current_state(TASK_RUNNING);
return retval;
}
#define vt_wake_waitactive() wake_up(&vt_activate_queue)
void reset_vc(struct vc_data *vc)
{
vc->vc_mode = KD_TEXT;
kbd_table[vc->vc_num].kbdmode = VC_XLATE;
vc->vt_mode.mode = VT_AUTO;
vc->vt_mode.waitv = 0;
vc->vt_mode.relsig = 0;
vc->vt_mode.acqsig = 0;
vc->vt_mode.frsig = 0;
put_pid(vc->vt_pid);
vc->vt_pid = NULL;
vc->vt_newvt = -1;
if (!in_interrupt()) /* Via keyboard.c:SAK() - akpm */
reset_palette(vc);
}
void vc_SAK(struct work_struct *work)
{
struct vc *vc_con =
container_of(work, struct vc, SAK_work);
struct vc_data *vc;
struct tty_struct *tty;
acquire_console_sem();
vc = vc_con->d;
if (vc) {
tty = vc->vc_tty;
/*
* SAK should also work in all raw modes and reset
* them properly.
*/
if (tty)
__do_SAK(tty);
reset_vc(vc);
}
release_console_sem();
}
/*
* Performs the back end of a vt switch
*/
static void complete_change_console(struct vc_data *vc)
{
unsigned char old_vc_mode;
last_console = fg_console;
/*
* If we're switching, we could be going from KD_GRAPHICS to
* KD_TEXT mode or vice versa, which means we need to blank or
* unblank the screen later.
*/
old_vc_mode = vc_cons[fg_console].d->vc_mode;
switch_screen(vc);
/*
* This can't appear below a successful kill_pid(). If it did,
* then the *blank_screen operation could occur while X, having
* received acqsig, is waking up on another processor. This
* condition can lead to overlapping accesses to the VGA range
* and the framebuffer (causing system lockups).
*
* To account for this we duplicate this code below only if the
* controlling process is gone and we've called reset_vc.
*/
if (old_vc_mode != vc->vc_mode) {
if (vc->vc_mode == KD_TEXT)
do_unblank_screen(1);
else
do_blank_screen(1);
}
/*
* If this new console is under process control, send it a signal
* telling it that it has acquired. Also check if it has died and
* clean up (similar to logic employed in change_console())
*/
if (vc->vt_mode.mode == VT_PROCESS) {
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
* is awry
*/
if (kill_pid(vc->vt_pid, vc->vt_mode.acqsig, 1) != 0) {
/*
* The controlling process has died, so we revert back to
* normal operation. In this case, we'll also change back
* to KD_TEXT mode. I'm not sure if this is strictly correct
* but it saves the agony when the X server dies and the screen
* remains blanked due to KD_GRAPHICS! It would be nice to do
* this outside of VT_PROCESS but there is no single process
* to account for and tracking tty count may be undesirable.
*/
reset_vc(vc);
if (old_vc_mode != vc->vc_mode) {
if (vc->vc_mode == KD_TEXT)
do_unblank_screen(1);
else
do_blank_screen(1);
}
}
}
/*
* Wake anyone waiting for their VT to activate
*/
vt_wake_waitactive();
return;
}
/*
* Performs the front-end of a vt switch
*/
void change_console(struct vc_data *new_vc)
{
struct vc_data *vc;
if (!new_vc || new_vc->vc_num == fg_console || vt_dont_switch)
return;
/*
* If this vt is in process mode, then we need to handshake with
* that process before switching. Essentially, we store where that
* vt wants to switch to and wait for it to tell us when it's done
* (via VT_RELDISP ioctl).
*
* We also check to see if the controlling process still exists.
* If it doesn't, we reset this vt to auto mode and continue.
* This is a cheap way to track process control. The worst thing
* that can happen is: we send a signal to a process, it dies, and
* the switch gets "lost" waiting for a response; hopefully, the
* user will try again, we'll detect the process is gone (unless
* the user waits just the right amount of time :-) and revert the
* vt to auto control.
*/
vc = vc_cons[fg_console].d;
if (vc->vt_mode.mode == VT_PROCESS) {
/*
* Send the signal as privileged - kill_pid() will
* tell us if the process has gone or something else
* is awry
*/
if (kill_pid(vc->vt_pid, vc->vt_mode.relsig, 1) == 0) {
/*
* It worked. Mark the vt to switch to and
* return. The process needs to send us a
* VT_RELDISP ioctl to complete the switch.
*/
vc->vt_newvt = new_vc->vc_num;
return;
}
/*
* The controlling process has died, so we revert back to
* normal operation. In this case, we'll also change back
* to KD_TEXT mode. I'm not sure if this is strictly correct
* but it saves the agony when the X server dies and the screen
* remains blanked due to KD_GRAPHICS! It would be nice to do
* this outside of VT_PROCESS but there is no single process
* to account for and tracking tty count may be undesirable.
*/
reset_vc(vc);
/*
* Fall through to normal (VT_AUTO) handling of the switch...
*/
}
/*
* Ignore all switches in KD_GRAPHICS+VT_AUTO mode
*/
if (vc->vc_mode == KD_GRAPHICS)
return;
complete_change_console(new_vc);
}