experimental-features.md
# Experimental features of Kubo
This document contains a list of experimental features in Kubo.
These features, commands, and APIs aren't mature, and you shouldn't rely on them.
Once they reach maturity, there's going to be mention in the changelog and
release posts. If they don't reach maturity, the same applies, and their code is
removed.
Subscribe to https://github.com/ipfs/kubo/issues/3397 to get updates.
When you add a new experimental feature to kubo or change an experimental
feature, you MUST please make a PR updating this document, and link the PR in
the above issue.
- [ipfs pubsub](#ipfs-pubsub)
- [Raw leaves for unixfs files](#raw-leaves-for-unixfs-files)
- [ipfs filestore](#ipfs-filestore)
- [ipfs urlstore](#ipfs-urlstore)
- [Private Networks](#private-networks)
- [ipfs p2p](#ipfs-p2p)
- [p2p http proxy](#p2p-http-proxy)
- [FUSE](#fuse)
- [Plugins](#plugins)
- [Directory Sharding / HAMT](#directory-sharding--hamt)
- [IPNS PubSub](#ipns-pubsub)
- [AutoRelay](#autorelay)
- [Strategic Providing](#strategic-providing)
- [Graphsync](#graphsync)
- [Noise](#noise)
- [Accelerated DHT Client](#accelerated-dht-client)
---
## ipfs pubsub
### State
Candidate, disabled by default but will be enabled by default in 0.6.0.
### In Version
0.4.5 (`--enable-pubsub-experiment`)
0.11.0 (`Pubsub.Enabled` flag in config)
### How to enable
Run your daemon with the `--enable-pubsub-experiment` flag
or modify your ipfs config and restart the daemon:
```
ipfs config --json Pubsub.Enabled true
```
Then use the `ipfs pubsub` commands.
NOTE: `--enable-pubsub-experiment` CLI flag overrides `Pubsub.Enabled` config.
Configuration documentation can be found in [kubo/docs/config.md](./config.md#pubsub)
### Road to being a real feature
- [ ] Needs to not impact peers who don't use pubsub:
https://github.com/libp2p/go-libp2p-pubsub/issues/332
## Raw Leaves for unixfs files
Allows files to be added with no formatting in the leaf nodes of the graph.
### State
Stable but not used by default.
### In Version
0.4.5
### How to enable
Use `--raw-leaves` flag when calling `ipfs add`. This will save some space when adding files.
### Road to being a real feature
Enabling this feature _by default_ will change the CIDs (hashes) of all newly imported files and will prevent newly imported files from deduplicating against previously imported files. While we do intend on enabling this by default, we plan on doing so once we have a large batch of "hash-changing" features we can enable all at once.
## ipfs filestore
Allows files to be added without duplicating the space they take up on disk.
### State
Experimental.
### In Version
0.4.7
### How to enable
Modify your ipfs config:
```
ipfs config --json Experimental.FilestoreEnabled true
```
Then restart your IPFS node to reload your config.
Finally, when adding files with ipfs add, pass the --nocopy flag to use the
filestore instead of copying the files into your local IPFS repo.
### Road to being a real feature
- [ ] Needs more people to use and report on how well it works.
- [ ] Need to address error states and failure conditions
- [ ] Need to write docs on usage, advantages, disadvantages
- [ ] Need to merge utility commands to aid in maintenance and repair of filestore
## ipfs urlstore
Allows ipfs to retrieve blocks contents via a URL instead of storing it in the datastore
### State
Experimental.
### In Version
v0.4.17
### How to enable
Modify your ipfs config:
```
ipfs config --json Experimental.UrlstoreEnabled true
```
And then add a file at a specific URL using `ipfs urlstore add <url>`
### Road to being a real feature
- [ ] Needs more people to use and report on how well it works.
- [ ] Need to address error states and failure conditions
- [ ] Need to write docs on usage, advantages, disadvantages
- [ ] Need to implement caching
- [ ] Need to add metrics to monitor performance
## Private Networks
It allows ipfs to only connect to other peers who have a shared secret key.
### State
Stable but not quite ready for prime-time.
### In Version
0.4.7
### How to enable
Generate a pre-shared-key using [ipfs-swarm-key-gen](https://github.com/Kubuxu/go-ipfs-swarm-key-gen)):
```
go get github.com/Kubuxu/go-ipfs-swarm-key-gen/ipfs-swarm-key-gen
ipfs-swarm-key-gen > ~/.ipfs/swarm.key
```
To join a given private network, get the key file from someone in the network
and save it to `~/.ipfs/swarm.key` (If you are using a custom `$IPFS_PATH`, put
it in there instead).
When using this feature, you will not be able to connect to the default bootstrap
nodes (Since we aren't part of your private network) so you will need to set up
your own bootstrap nodes.
First, to prevent your node from even trying to connect to the default bootstrap nodes, run:
```bash
ipfs bootstrap rm --all
```
Then add your own bootstrap peers with:
```bash
ipfs bootstrap add <multiaddr>
```
For example:
```
ipfs bootstrap add /ip4/104.236.76.40/tcp/4001/p2p/QmSoLV4Bbm51jM9C4gDYZQ9Cy3U6aXMJDAbzgu2fzaDs64
```
Bootstrap nodes are no different from all other nodes in the network apart from
the function they serve.
To be extra cautious, You can also set the `LIBP2P_FORCE_PNET` environment
variable to `1` to force the usage of private networks. If no private network is
configured, the daemon will fail to start.
### Road to being a real feature
- [x] Needs more people to use and report on how well it works
- [ ] More documentation
- [ ] Needs better tooling/UX.
## ipfs p2p
Allows tunneling of TCP connections through Libp2p streams. If you've ever used
port forwarding with SSH (the `-L` option in OpenSSH), this feature is quite
similar.
### State
Experimental, will be stabilized in 0.6.0
### In Version
0.4.10
### How to enable
The `p2p` command needs to be enabled in the config:
```sh
> ipfs config --json Experimental.Libp2pStreamMounting true
```
### How to use
**Netcat example:**
First, pick a protocol name for your application. Think of the protocol name as
a port number, just significantly more user-friendly. In this example, we're
going to use `/x/kickass/1.0`.
***Setup:***
1. A "server" node with peer ID `$SERVER_ID`
2. A "client" node.
***On the "server" node:***
First, start your application and have it listen for TCP connections on
port `$APP_PORT`.
Then, configure the p2p listener by running:
```sh
> ipfs p2p listen /x/kickass/1.0 /ip4/127.0.0.1/tcp/$APP_PORT
```
This will configure IPFS to forward all incoming `/x/kickass/1.0` streams to
`127.0.0.1:$APP_PORT` (opening a new connection to `127.0.0.1:$APP_PORT` per
incoming stream.
***On the "client" node:***
First, configure the client p2p dialer, so that it forwards all inbound
connections on `127.0.0.1:SOME_PORT` to the server node listening
on `/x/kickass/1.0`.
```sh
> ipfs p2p forward /x/kickass/1.0 /ip4/127.0.0.1/tcp/$SOME_PORT /p2p/$SERVER_ID
```
Next, have your application open a connection to `127.0.0.1:$SOME_PORT`. This
connection will be forwarded to the service running on `127.0.0.1:$APP_PORT` on
the remote machine. You can test it with netcat:
***On "server" node:***
```sh
> nc -v -l -p $APP_PORT
```
***On "client" node:***
```sh
> nc -v 127.0.0.1 $SOME_PORT
```
You should now see that a connection has been established and be able to
exchange messages between netcat instances.
(note that depending on your netcat version you may need to drop the `-v` flag)
**SSH example**
**Setup:**
1. A "server" node with peer ID `$SERVER_ID` and running ssh server on the
default port.
2. A "client" node.
_you can get `$SERVER_ID` by running `ipfs id -f "<id>\n"`_
***First, on the "server" node:***
```sh
ipfs p2p listen /x/ssh /ip4/127.0.0.1/tcp/22
```
***Then, on "client" node:***
```sh
ipfs p2p forward /x/ssh /ip4/127.0.0.1/tcp/2222 /p2p/$SERVER_ID
```
You should now be able to connect to your ssh server through a libp2p connection
with `ssh [user]@127.0.0.1 -p 2222`.
### Road to being a real feature
- [ ] More documentation
## p2p http proxy
Allows proxying of HTTP requests over p2p streams. This allows serving any standard HTTP app over p2p streams.
### State
Experimental
### In Version
0.4.19
### How to enable
The `p2p` command needs to be enabled in the config:
```sh
> ipfs config --json Experimental.Libp2pStreamMounting true
```
On the client, the p2p HTTP proxy needs to be enabled in the config:
```sh
> ipfs config --json Experimental.P2pHttpProxy true
```
### How to use
**Netcat example:**
First, pick a protocol name for your application. Think of the protocol name as
a port number, just significantly more user-friendly. In this example, we're
going to use `/http`.
***Setup:***
1. A "server" node with peer ID `$SERVER_ID`
2. A "client" node.
***On the "server" node:***
First, start your application and have it listen for TCP connections on
port `$APP_PORT`.
Then, configure the p2p listener by running:
```sh
> ipfs p2p listen --allow-custom-protocol /http /ip4/127.0.0.1/tcp/$APP_PORT
```
This will configure IPFS to forward all incoming `/http` streams to
`127.0.0.1:$APP_PORT` (opening a new connection to `127.0.0.1:$APP_PORT` per incoming stream.
***On the "client" node:***
Next, have your application make a http request to `127.0.0.1:8080/p2p/$SERVER_ID/http/$FORWARDED_PATH`. This
connection will be forwarded to the service running on `127.0.0.1:$APP_PORT` on
the remote machine (which needs to be a http server!) with path `$FORWARDED_PATH`. You can test it with netcat:
***On "server" node:***
```sh
> echo -e "HTTP/1.1 200\nContent-length: 11\n\nIPFS rocks!" | nc -l -p $APP_PORT
```
***On "client" node:***
```sh
> curl http://localhost:8080/p2p/$SERVER_ID/http/
```
You should now see the resulting HTTP response: IPFS rocks!
### Custom protocol names
We also support the use of protocol names of the form /x/$NAME/http where $NAME doesn't contain any "/"'s
### Road to being a real feature
- [ ] Needs p2p streams to graduate from experiments
- [ ] Needs more people to use and report on how well it works / fits use cases
- [ ] More documentation
- [ ] Need better integration with the subdomain gateway feature.
## FUSE
FUSE makes it possible to mount `/ipfs` and `/ipns` namespaces in your OS,
allowing argitrary apps access to IPFS using a subset of filesystem abstractions.
It is considered EXPERIMENTAL due to limited (and buggy) support on some platforms.
See [fuse.md](./fuse.md) for more details.
## Plugins
### In Version
0.4.11
### State
Experimental
Plugins allow adding functionality without the need to recompile the daemon.
### Basic Usage:
See [Plugin docs](./plugins.md)
### Road to being a real feature
- [x] More plugins and plugin types
- [ ] A way to reliably build and distribute plugins.
- [ ] Better support for platforms other than Linux & MacOS
- [ ] Feedback on stability
## Directory Sharding / HAMT
### In Version
- 0.4.8:
- Introduced `Experimental.ShardingEnabled` which enabled sharding globally.
- All-or-nothing, unnecessary sharding of small directories.
- 0.11.0 :
- Removed support for `Experimental.ShardingEnabled`
- Replaced with automatic sharding based on the block size
### State
Replaced by autosharding.
The `Experimental.ShardingEnabled` config field is no longer used, please remove it from your configs.
kubo now automatically shards when directory block is bigger than 256KB, ensuring every block is small enough to be exchanged with other peers
## IPNS pubsub
### In Version
0.4.14 :
- Introduced
0.5.0 :
- No longer needs to use the DHT for the first resolution
- When discovering PubSub peers via the DHT, the DHT key is different from previous versions
- This leads to 0.5 IPNS pubsub peers and 0.4 IPNS pubsub peers not being able to find each other in the DHT
- Robustness improvements
0.11.0 :
- Can be enabled via `Ipns.UsePubsub` flag in config
### State
Experimental, default-disabled.
Utilizes pubsub for publishing ipns records in real time.
When it is enabled:
- IPNS publishers push records to a name-specific pubsub topic,
in addition to publishing to the DHT.
- IPNS resolvers subscribe to the name-specific topic on first
resolution and receive subsequently published records through pubsub in real time.
This makes subsequent resolutions instant, as they are resolved through the local cache.
Both the publisher and the resolver nodes need to have the feature enabled for it to work effectively.
Note: While IPNS pubsub has been available since 0.4.14, it received major changes in 0.5.0.
Users interested in this feature should upgrade to at least 0.5.0
### How to enable
Run your daemon with the `--enable-namesys-pubsub` flag
or modify your ipfs config and restart the daemon:
```
ipfs config --json Ipns.UsePubsub true
```
NOTE:
- This feature implicitly enables [ipfs pubsub](#ipfs-pubsub).
- Passing `--enable-namesys-pubsub` CLI flag overrides `Ipns.UsePubsub` config.
### Road to being a real feature
- [ ] Needs more people to use and report on how well it works
- [ ] Pubsub enabled as a real feature
## AutoRelay
### In Version
- 0.4.19 :
- Introduced Circuit Relay v1
- 0.11.0 :
- Deprecated v1
- Introduced [Circuit Relay v2](https://github.com/libp2p/specs/blob/master/relay/circuit-v2.md)
### State
Experimental, disabled by default.
Automatically discovers relays and advertises relay addresses when the node is behind an impenetrable NAT.
### How to enable
Modify your ipfs config:
```
ipfs config --json Swarm.RelayClient.Enabled true
```
### Road to being a real feature
- [ ] needs testing
- [ ] needs to be automatically enabled when AutoNAT detects node is behind an impenetrable NAT.
## Strategic Providing
### State
Experimental, disabled by default.
Replaces the existing provide mechanism with a robust, strategic provider system. Currently enabling this option will provide nothing.
### How to enable
Modify your ipfs config:
```
ipfs config --json Experimental.StrategicProviding true
```
### Road to being a real feature
- [ ] needs real-world testing
- [ ] needs adoption
- [ ] needs to support all provider subsystem features
- [X] provide nothing
- [ ] provide roots
- [ ] provide all
- [ ] provide strategic
## GraphSync
### State
Experimental, disabled by default.
[GraphSync](https://github.com/ipfs/go-graphsync) is the next-gen graph exchange
protocol for IPFS.
When this feature is enabled, IPFS will make files available over the graphsync
protocol. However, IPFS will not currently use this protocol to _fetch_ files.
### How to enable
Modify your ipfs config:
```
ipfs config --json Experimental.GraphsyncEnabled true
```
### Road to being a real feature
- [ ] We need to confirm that it can't be used to DoS a node. The server-side logic for GraphSync is quite complex and, if we're not careful, the server might end up performing unbounded work when responding to a malicious request.
## Noise
### State
Stable, enabled by default
[Noise](https://github.com/libp2p/specs/tree/master/noise) libp2p transport based on the [Noise Protocol Framework](https://noiseprotocol.org/noise.html). While TLS remains the default transport in Kubo, Noise is easier to implement and is thus the "interop" transport between IPFS and libp2p implementations.
## Accelerated DHT Client
### In Version
0.9.0
### State
Experimental, default-disabled.
Utilizes an alternative DHT client that searches for and maintains more information about the network
in exchange for being more performant.
When it is enabled:
- DHT operations should complete much faster than with it disabled
- A batching reprovider system will be enabled which takes advantage of some properties of the experimental client to
very efficiently put provider records into the network
- The standard DHT client (and server if enabled) are run alongside the alternative client
- The operations `ipfs stats dht` and `ipfs stats provide` will have different outputs
- `ipfs stats provide` only works when the accelerated DHT client is enabled and shows various statistics regarding
the provider/reprovider system
- `ipfs stats dht` will default to showing information about the new client
**Caveats:**
1. Running the experimental client likely will result in more resource consumption (connections, RAM, CPU, bandwidth)
- Users that are limited in the number of parallel connections their machines/networks can perform will likely suffer
- Currently, the resource usage is not smooth as the client crawls the network in rounds and reproviding is similarly
done in rounds
- Users who previously had a lot of content but were unable to advertise it on the network will see an increase in
egress bandwidth as their nodes start to advertise all of their CIDs into the network. If you have lots of data
entering your node that you don't want to advertise consider using [Reprovider Strategies](config.md#reproviderstrategy)
to reduce the number of CIDs that you are reproviding. Similarly, if you are running a node that deals mostly with
short-lived temporary data (e.g. you use a separate node for ingesting data then for storing and serving it) then
you may benefit from using [Strategic Providing](#strategic-providing) to prevent advertising of data that you
ultimately will not have.
2. Currently, the DHT is not usable for queries for the first 5-10 minutes of operation as the routing table is being
prepared. This means operations like searching the DHT for particular peers or content will not work
- You can see if the DHT has been initially populated by running `ipfs stats dht`
3. Currently, the accelerated DHT client is not compatible with LAN-based DHTs and will not perform operations against
them
### How to enable
```
ipfs config --json Experimental.AcceleratedDHTClient true
```
### Road to being a real feature
- [ ] Needs more people to use and report on how well it works
- [ ] Should be usable for queries (even if slower/less efficient) shortly after startup
- [ ] Should be usable with non-WAN DHTs