/* linux/arch/arm/plat-s5p/sleep.S
 *
 * Copyright (c) 2010 Samsung Electronics Co., Ltd.
 *		http://www.samsung.com
 *
 * S5PV210 power Manager (Suspend-To-RAM) support
 * Based on S3C2410 sleep code by:
 * 	Ben Dooks, (c) 2004 Simtec Electronics
 *
 * Based on PXA/SA1100 sleep code by:
 *	Nicolas Pitre, (c) 2002 Monta Vista Software Inc
 *	Cliff Brake, (c) 2001
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
*/

#include <linux/linkage.h>
#include <asm/assembler.h>
#include <asm/memory.h>

	.text

	/* s3c_cpu_save
	 *
	 * entry:
	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
	*/

ENTRY(s3c_cpu_save)

	stmfd	sp!, { r3 - r12, lr }

	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
	mrc	p15, 0, r9, c1, c0, 0	@ Control register
	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
	mrc	p15, 0, r12, c10, c2, 0	@ Read PRRR
	mrc	p15, 0, r3, c10, c2, 1	@ READ NMRR

	stmia	r0, { r3 - r13 }

	bl	s3c_pm_cb_flushcache

	ldr	r0, =pm_cpu_sleep
	ldr	r0, [ r0 ]
	mov	pc, r0

resume_with_mmu:
	/*
	 * After MMU is turned on, restore the previous MMU table.
	 */
	ldr	r9 , =(PAGE_OFFSET - PHYS_OFFSET)
	add	r4, r4, r9
	str	r12, [r4]

	ldmfd	sp!, { r3 - r12, pc }

	.ltorg

	.data

	.global	s3c_sleep_save_phys
s3c_sleep_save_phys:
	.word	0

	/* sleep magic, to allow the bootloader to check for an valid
	 * image to resume to. Must be the first word before the
	 * s3c_cpu_resume entry.
	*/

	.word	0x2bedf00d

	/* s3c_cpu_resume
	 *
	 * resume code entry for bootloader to call
	 *
	 * we must put this code here in the data segment as we have no
	 * other way of restoring the stack pointer after sleep, and we
	 * must not write to the code segment (code is read-only)
	*/

ENTRY(s3c_cpu_resume)
	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
	msr	cpsr_c, r0

	mov	r1, #0
	mcr	p15, 0, r1, c8, c7, 0		@ invalidate TLBs
	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I Cache

	ldr	r0, s3c_sleep_save_phys		@ address of restore block
	ldmia	r0, { r3 - r13 }

	mcr	p15, 0, r4, c13, c0, 0		@ FCSE/PID
	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID

	mcr	p15, 0, r8, c2, c0, 2		@ Translation Table Control
	mcr	p15, 0, r7, c2, c0, 1		@ Translation Table BASE1
	mcr	p15, 0, r6, c2, c0, 0		@ Translation Table BASE0

	mcr	p15, 0, r10, c1, c0, 1		@ Auxiliary control register

	mov	r0, #0
	mcr	p15, 0, r0, c8, c7, 0		@ Invalidate I & D TLB

	mov	r0, #0				@ restore copro access
	mcr	p15, 0, r11, c1, c0, 2		@ Co-processor access
	mcr 	p15, 0, r0, c7, c5, 4

	mcr	p15, 0, r12, c10, c2, 0		@ write PRRR
	mcr	p15, 0, r3, c10, c2, 1		@ write NMRR

	/*
	 * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
	 * And there are no valid entries in the MMU table at this point.
	 * So before turning on the MMU, the MMU entry for the DRAM address
	 * range is added. After the MMU is turned on, the other entries
	 * in the MMU table will be restored.
	*/

	/* r6 = Translation Table BASE0 */
	mov	r4, r6
	mov	r4, r4, LSR #14
	mov	r4, r4, LSL #14

	/* Load address for adding to MMU table list */
	ldr	r11, =0xE010F000		@ INFORM0 reg.
	ldr	r10, [r11, #0]
	mov	r10, r10, LSR #18
	bic	r10, r10, #0x3
	orr	r4, r4, r10

	/* Calculate MMU table entry */
	mov 	r10, r10, LSL #18
	ldr	r5, =0x40E
	orr	r10, r10, r5

	/* Back up originally data */
	ldr	r12, [r4]

	/* Add calculated MMU table entry into MMU table list */
	str	r10, [r4]

	ldr	r2, =resume_with_mmu
	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc

	nop
	nop
	nop
	nop
	nop					@ second-to-last before mmu

	mov	pc, r2				@ go back to virtual address

	.ltorg