AIX-NOTES
Subject: AIX - Misc/AIX-NOTES
From: Vladimir Marangozov <Vladimir.Marangozov@imag.fr>
To: guido@CNRI.Reston.Va.US (Guido van Rossum)
Date: Wed, 6 Aug 1997 11:41:00 +0200 (EET)
==============================================================================
COMPILER INFORMATION
------------------------------------------------------------------------------
(1) A problem has been reported with "make test" failing because of "weird
indentation." Searching the comp.lang.python newsgroup reveals several
threads on this subject, and it seems to be a compiler bug in an old
version of the AIX CC compiler. However, the compiler/OS combination
which has this problem is not identified. In preparation for the 1.4
release, Vladimir Marangozov (Vladimir.Marangozov@imag.fr) and Manus Hand
(mhand@csn.net) reported no such troubles for the following compilers and
operating system versions:
AIX C compiler version 3.1.2 on AIX 4.1.3 and AIX 4.1.4
AIX C compiler version 1.3.0 on AIX 3.2.5
If you have this problem, please report the compiler/OS version.
(2) Stefan Esser (se@MI.Uni-Koeln.DE), in work done to compile Python
1.0.0 on AIX 3.2.4, reports that AIX compilers don't like the LANG
environment varaiable set to European locales. This makes the compiler
generate floating point constants using "," as the decimal separator,
which the assembler doesn't understand (or perhaps it is the other way
around, with the assembler expecting, but not getting "," in float
numbers). "LANG=C; export LANG" solves the problem, as does
"LANG=C $(MAKE) ..." in the master Makefile.
(3) The cc (or xlc) compiler considers "Python/ceval.c" too complex to
optimize, except when invoked with "-qmaxmem=4000"
(4) Some problems (due to _AIX not being #defined) when python 1.0.0 was
compiled using 'gcc -ansi' were reported by Stefan Esser, but were not
investigated.
(5) The cc compiler has internal variables named "__abs" and "__div". These
names are reserved and may not be used as program variables in compiled
source. (As an anecdote in support of this, the implementation of
Python/operator.c had this problem in the 1.4 beta releases, and the
solution was to re#define some core-source variables having these names,
to give these python variables different names if the build is being done
on AIX.)
(6) As mentioned in the README, builds done immediately after previous builds
(without "make clean" or "make clobber") sometimes fail for mysterious
reasons. There are some unpredictable results when the configuration
is changed (that is, if you "configure" with different parameters) or if
intermediate changes are made to some files. Performing "make clean" or
"make clobber" resolves the problems.
==============================================================================
THREAD SUPPORT
------------------------------------------------------------------------------
As of AIX version 4, there are two (incompatible) types of pthreads on AIX:
a) AIX DCE pthreads (on AIX 3.2.5)
b) AIX 4 pthreads (on AIX 4.1 and up)
Support has been added to Python to handle the distinction.
The cc and gcc compilers do not initialize pthreads properly. The only
compilers that can initialize pthreads properly are IBM *_r* compilers,
which use the crt0_r.o module, and which invoke ld with the reentrant
version of libc (libc_r).
In order to enable thread support, follow these steps:
1. Uncomment the thread module in Modules/Setup
2. configure --without-gcc --with-thread ...
3. make CC="cc_r" OPT="-O -qmaxmem=4000"
For example, to make with both threads and readline, use:
./configure --without-gcc --with-thread --with-readline=/usr/local/lib
make CC=cc_r OPT="-O2 -qmaxmem=4000"
If the "make" which is used ignores the "CC=cc_r" directive, one could alias
the cc command to cc_r (for example, in C-shell, perform an "alias cc cc_r").
Vladimir Marangozov (Vladimir.Marangozov@imag.fr) provided this information,
and he reports that a cc_r build initializes threads properly and that all
demos on threads run okay with cc_r.
==============================================================================
SHARED LIBRARY SUPPORT
------------------------------------------------------------------------------
AIX shared library support was added to Python in the 1.4 release by Manus
Hand (mhand@csn.net) and Vladimir Marangozov (Vladimir.Marangozov@imag.fr).
Python modules may now be built as shared libraries on AIX using the normal
process of uncommenting the "*shared*" line in Modules/Setup before the
build.
AIX shared libraries require that an "export" and "import" file be provided
at compile time to list all extern symbols which may be shared between
modules. The "export" file (named python.exp) for the modules and the
libraries that belong to the Python core is created by the "makexp_aix"
script before performing the link of the python binary. It lists all global
symbols (exported during the link) of the modules and the libraries that
make up the python executable.
When shared library modules (.so files) are made, a second shell script
is invoked. This script is named "ld_so_aix" and is also provided with
the distribution in the Modules subdirectory. This script acts as an "ld"
wrapper which hides the explicit management of "export" and "import" files;
it adds the appropriate arguments (in the appropriate order) to the link
command that creates the shared module. Among other things, it specifies
that the "python.exp" file is an "import" file for the shared module.
At the time of this writing, neither the python.exp file nor the makexp_aix
or ld_so_aix scripts are installed by the make procedure, so you should
remember to keep these and/or copy them to a different location for
safekeeping if you wish to use them to add shared extension modules to
python. However, if the make process has been updated since this writing,
these files MAY have been installed for you during the make by the
LIBAINSTALL rule, in which case the need to make safe copies is obviated.
If you wish to add a shared extension module to the language, you would follow
the steps given in the example below (the example adds the shared extension
module "spam" to python):
1. Make sure that "ld_so_aix" and "makexp_aix" are in your path.
2. The "python.exp" file should be in the current directory.
3. Issue the following commands or include them in your Makefile:
cc -c spammodule.c
ld_so_aix cc spammodule.o -o spammodule.so
For more detailed information on the shared library support, examine the
contents of the "ld_so_aix" and "makexp_aix" scripts or refer to the AIX
documentation.
NOTE: If the extension module is written in C++ and contains templates,
an alternative to "ld_so_aix" is the /usr/lpp/xlC/bin/makeC++SharedLib
script. Chris Myers (myers@TC.Cornell.EDU) reports that ld_so_aix
works well for some C++ (including the C++ that is generated
automatically by the Python SWIG package [SWIG can be found at
http://www.cs.utah.edu/~beazley/SWIG/swig.html]). However, it is not
known whether makeC++SharedLib can be used as a complete substitute
for ld_so_aix.
According to Gary Hook from IBM, the format of the export file changed
in AIX 4.2. For AIX 4.2 and later, a period "." is required on the
first line after "#!". If python crashes while importing a shared
library, you can try modifying the LINKCC variable in the Makefile.
It probably looks like this:
LINKCC= $(srcdir)/Modules/makexp_aix Modules/python.exp \"\" $(LIBRARY); $(PURIFY) $(CXX)
You should modify the \"\" to be a period:
LINKCC= $(srcdir)/Modules/makexp_aix Modules/python.exp . $(LIBRARY); $(PURIFY) $(CXX)
Using a period fixed the problem in the snake farm. YMMV.
This fix has been incorporated into Python 2.3.
==============================================================================