sleep.S
/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* sleep mode for CSR SiRFprimaII
*
* Copyright (c) 2011 Cambridge Silicon Radio Limited, a CSR plc group company.
*/
#include <linux/linkage.h>
#include <asm/ptrace.h>
#include <asm/assembler.h>
#include "pm.h"
#define DENALI_CTL_22_OFF 0x58
#define DENALI_CTL_112_OFF 0x1c0
.text
ENTRY(sirfsoc_finish_suspend)
@ r5: mem controller
ldr r0, =sirfsoc_memc_base
ldr r5, [r0]
@ r6: pwrc base offset
ldr r0, =sirfsoc_pwrc_base
ldr r6, [r0]
@ r7: rtc iobrg controller
ldr r0, =sirfsoc_rtciobrg_base
ldr r7, [r0]
@ Read the power control register and set the
@ sleep force bit.
add r0, r6, #SIRFSOC_PWRC_PDN_CTRL
bl __sirfsoc_rtc_iobrg_readl
orr r0,r0,#SIRFSOC_PWR_SLEEPFORCE
add r1, r6, #SIRFSOC_PWRC_PDN_CTRL
bl sirfsoc_rtc_iobrg_pre_writel
mov r1, #0x1
@ read the MEM ctl register and set the self
@ refresh bit
ldr r2, [r5, #DENALI_CTL_22_OFF]
orr r2, r2, #0x1
@ Following code has to run from cache since
@ the RAM is going to self refresh mode
.align 5
str r2, [r5, #DENALI_CTL_22_OFF]
1:
ldr r4, [r5, #DENALI_CTL_112_OFF]
tst r4, #0x1
bne 1b
@ write SLEEPFORCE through rtc iobridge
str r1, [r7]
@ wait rtc io bridge sync
1:
ldr r3, [r7]
tst r3, #0x01
bne 1b
b .