sa1111_lubbock.c
/*
* linux/drivers/pcmcia/pxa2xx_lubbock.c
*
* Author: George Davis
* Created: Jan 10, 2002
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Originally based upon linux/drivers/pcmcia/sa1100_neponset.c
*
* Lubbock PCMCIA specific routines.
*
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <mach/hardware.h>
#include <asm/hardware/sa1111.h>
#include <asm/mach-types.h>
#include "sa1111_generic.h"
#include "max1600.h"
static int lubbock_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
struct max1600 *m;
int ret;
ret = max1600_init(skt->socket.dev.parent, &m,
skt->nr ? MAX1600_CHAN_B : MAX1600_CHAN_A,
MAX1600_CODE_HIGH);
if (ret == 0)
skt->driver_data = m;
return ret;
}
static int
lubbock_pcmcia_configure_socket(struct soc_pcmcia_socket *skt,
const socket_state_t *state)
{
struct max1600 *m = skt->driver_data;
int ret = 0;
/* Lubbock uses the Maxim MAX1602, with the following connections:
*
* Socket 0 (PCMCIA):
* MAX1602 Lubbock Register
* Pin Signal
* ----- ------- ----------------------
* A0VPP S0_PWR0 SA-1111 GPIO A<0>
* A1VPP S0_PWR1 SA-1111 GPIO A<1>
* A0VCC S0_PWR2 SA-1111 GPIO A<2>
* A1VCC S0_PWR3 SA-1111 GPIO A<3>
* VX VCC
* VY +3.3V
* 12IN +12V
* CODE +3.3V Cirrus Code, CODE = High (VY)
*
* Socket 1 (CF):
* MAX1602 Lubbock Register
* Pin Signal
* ----- ------- ----------------------
* A0VPP GND VPP is not connected
* A1VPP GND VPP is not connected
* A0VCC S1_PWR0 MISC_WR<14>
* A1VCC S1_PWR1 MISC_WR<15>
* VX VCC
* VY +3.3V
* 12IN GND VPP is not connected
* CODE +3.3V Cirrus Code, CODE = High (VY)
*
*/
again:
switch (skt->nr) {
case 0:
case 1:
break;
default:
ret = -1;
}
if (ret == 0)
ret = sa1111_pcmcia_configure_socket(skt, state);
if (ret == 0)
ret = max1600_configure(m, state->Vcc, state->Vpp);
#if 1
if (ret == 0 && state->Vcc == 33) {
struct pcmcia_state new_state;
/*
* HACK ALERT:
* We can't sense the voltage properly on Lubbock before
* actually applying some power to the socket (catch 22).
* Resense the socket Voltage Sense pins after applying
* socket power.
*
* Note: It takes about 2.5ms for the MAX1602 VCC output
* to rise.
*/
mdelay(3);
sa1111_pcmcia_socket_state(skt, &new_state);
if (!new_state.vs_3v && !new_state.vs_Xv) {
/*
* Switch to 5V, Configure socket with 5V voltage
*/
max1600_configure(m, 0, 0);
/*
* It takes about 100ms to turn off Vcc.
*/
mdelay(100);
/*
* We need to hack around the const qualifier as
* well to keep this ugly workaround localized and
* not force it to the rest of the code. Barf bags
* available in the seat pocket in front of you!
*/
((socket_state_t *)state)->Vcc = 50;
((socket_state_t *)state)->Vpp = 50;
goto again;
}
}
#endif
return ret;
}
static struct pcmcia_low_level lubbock_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = lubbock_pcmcia_hw_init,
.configure_socket = lubbock_pcmcia_configure_socket,
.first = 0,
.nr = 2,
};
#include "pxa2xx_base.h"
int pcmcia_lubbock_init(struct sa1111_dev *sadev)
{
pxa2xx_drv_pcmcia_ops(&lubbock_pcmcia_ops);
pxa2xx_configure_sockets(&sadev->dev, &lubbock_pcmcia_ops);
return sa1111_pcmcia_add(sadev, &lubbock_pcmcia_ops,
pxa2xx_drv_pcmcia_add_one);
}
MODULE_LICENSE("GPL");