MON.cpp
/****************************************************************************
* MON - AGC MONITOR subsystem
*
* AUTHOR: John Pultorak
* DATE: 9/22/01
* FILE: MON.cpp
*
* NOTES: see header file.
*
*****************************************************************************
*/
#include "MON.h"
#include "TPG.h"
#include "MON.h"
#include "SCL.h"
#include "SEQ.h"
#include "INP.h"
#include "OUT.h"
#include "BUS.h"
#include "DSP.h"
#include "ADR.h"
#include "PAR.h"
#include "MBF.h"
#include "MEM.h"
#include "CTR.h"
#include "INT.h"
#include "KBD.h"
#include "CRG.h"
#include "ALU.h"
#include "CPM.h"
#include "ISD.h"
#include "CLK.h"
unsigned MON::PURST = 1; // power up reset; initially high at startup
unsigned MON::RUN = 0; // run/halt switch
unsigned MON::STEP = 0; // single step switch
unsigned MON::INST = 1; // instruction/sequence step select switch
unsigned MON::FCLK = 0; // clock mode
unsigned MON::SA = 0; // "standby allowed" SW; 0=NO (full power), 1=YES (low power)
unsigned MON::SCL_ENAB = 1; // "scaler enabled" SW; 0=NO (scaler halted), 1=YES (scaler running)
void
MON::displayAGC()
{
char buf[100];
cout << "AGC4 SIMULATOR 1.16 -------------------------------" << endl;
sprintf(buf, " TP: %-5s F17:%1d F13:%1d F10:%1d SCL:%06o",
TPG::tpTypestring[TPG::register_SG.read()], SCL::register_F17.read(),
SCL::register_F13.read(), SCL::register_F10.read(),
SCL::register_SCL.read());
cout << buf << endl;
sprintf(buf,
" STA:%01o STB:%01o BR1:%01o BR2:%01o SNI:%01o CI:%01o LOOPCTR:%01o",
SEQ::register_STA.read(), SEQ::register_STB.read(),
SEQ::register_BR1.read(), SEQ::register_BR2.read(),
SEQ::register_SNI.read(), ALU::register_CI.read(),
SEQ::register_LOOPCTR.read());
cout << buf << endl;
sprintf(buf,
" RPCELL:%05o INH1:%01o INH:%01o UpCELL:%03o DnCELL:%03o SQ:%02o %-6s %-6s",
INT::register_RPCELL.read(), INT::register_INHINT1.read(),
INT::register_INHINT.read(), CTR::register_UpCELL.read(),
CTR::register_DnCELL.read(), SEQ::register_SQ.read(),
SEQ::instructionString[SEQ::register_SQ.read()],
CPM::subseqString[SEQ::glbl_subseq]);
cout << buf << endl;
sprintf(buf, " CP:%s", SEQ::getControlPulses());
cout << buf << endl;
// For the G register, bit 15 comes from register G15; the other bits (16, 14-1) come
// from register G.
sprintf(buf,
" S: %04o G:%06o P:%06o (r)RUN :%1d (p)PURST:%1d (F2,F4)FCLK:%1d",
ADR::register_S.read(),
(MBF::register_G.read() & 0137777) | (PAR::register_G15.read() << 14),
PAR::register_P.read(), MON::RUN, MON::PURST, MON::FCLK);
cout << buf << endl;
sprintf(buf, " RBU:%06o WBU:%06o P2:%01o (s)STEP:%1d",
BUS::glbl_READ_BUS & 0177777, BUS::glbl_WRITE_BUS & 0177777,
PAR::register_P2.read(), MON::STEP);
cout << buf << endl;
char parityAlm = ' ';
if (PAR::register_PALM.read())
parityAlm = '*';
sprintf(buf, " B:%06o CADR:%06o (n)INST:%1d PALM:[%c]",
ALU::register_B.read(), ADR::getEffectiveAddress(), MON::INST, parityAlm);
cout << buf << endl;
sprintf(buf, " X:%06o Y:%06o U:%06o (a)SA :%1d", ALU::register_X.read(),
ALU::register_Y.read(), ALU::register_U.read(), MON::SA);
cout << buf << endl;
cout << endl;
sprintf(buf, "00 A:%06o 15 BANK:%02o 36 TIME1:%06o 53 OPT Y:%06o",
CRG::register_A.read(), ADR::register_BNK.read(), MEM::readMemory(036),
MEM::readMemory(053));
cout << buf << endl;
sprintf(buf, "01 Q:%06o 16 RELINT:%6s 37 TIME3:%06o 54 TRKR X:%06o",
CRG::register_Q.read(), "", MEM::readMemory(037), MEM::readMemory(054));
cout << buf << endl;
sprintf(buf, "02 Z:%06o 17 INHINT:%6s 40 TIME4:%06o 55 TRKR Y:%06o",
CRG::register_Z.read(), "", MEM::readMemory(040), MEM::readMemory(055));
cout << buf << endl;
sprintf(buf, "03 LP:%06o 20 CYR:%06o 41 UPLINK:%06o 56 TRKR Z:%06o",
CRG::register_LP.read(), MEM::readMemory(020), MEM::readMemory(041),
MEM::readMemory(056));
cout << buf << endl;
sprintf(buf, "04 IN0:%06o 21 SR:%06o 42 OUTCR1:%06o",
INP::register_IN0.read(), MEM::readMemory(021), MEM::readMemory(042));
cout << buf << endl;
char progAlm = ' ';
if (OUT::register_OUT1.read() & 0400)
progAlm = '*';
char compFail = ' '; // also called 'check fail' and 'oper err'
if (OUT::register_OUT1.read() & 0100)
compFail = '*';
char keyRels = ' ';
if (OUT::register_OUT1.read() & 020)
keyRels = '*';
char upTl = ' ';
if (OUT::register_OUT1.read() & 004)
upTl = '*';
char comp = ' '; // also called comp acty
if (OUT::register_OUT1.read() & 001)
comp = '*';
sprintf(buf, "05 IN1:%06o 22 CYL:%06o 43 OUTCR2:%06o CF:[%c%c]:KR [%c]:PA",
INP::register_IN1.read(), MEM::readMemory(022), MEM::readMemory(043),
compFail, keyRels, progAlm);
cout << buf << endl;
sprintf(buf, "06 IN2:%06o 23 SL:%06o 44 PIPA X:%06o",
INP::register_IN2.read(), MEM::readMemory(023), MEM::readMemory(044));
cout << buf << endl;
sprintf(buf, "07 IN3:%06o 24 ZRUPT:%06o 45 PIPA Y:%06o A:[%c%c] M:[%c%c]",
INP::register_IN3.read(), MEM::readMemory(024), MEM::readMemory(045),
upTl, comp, DSP::MD1, DSP::MD2);
cout << buf << endl;
char fc = ' ';
if (DSP::flash)
fc = '*';
sprintf(buf, "10 OUT0: 25 BRUPT:%06o 46 PIPA Z:%06o V:[%c%c] N:[%c%c] %c",
MEM::readMemory(025), MEM::readMemory(046), DSP::VD1, DSP::VD2, DSP::ND1,
DSP::ND2, fc);
cout << buf << endl;
sprintf(buf, "11 OUT1:%06o 26 ARUPT:%06o 47 CDU X:%06o R1:[ %c%c%c%c%c%c ]",
OUT::register_OUT1.read(), MEM::readMemory(026), MEM::readMemory(047),
DSP::R1S, DSP::R1D1, DSP::R1D2, DSP::R1D3, DSP::R1D4, DSP::R1D5);
cout << buf << endl;
sprintf(buf, "12 OUT2:%06o 27 QRUPT:%06o 50 CDU Y:%06o R2:[ %c%c%c%c%c%c ]",
OUT::register_OUT2.read(), MEM::readMemory(027), MEM::readMemory(050),
DSP::R2S, DSP::R2D1, DSP::R2D2, DSP::R2D3, DSP::R2D4, DSP::R2D5);
cout << buf << endl;
sprintf(buf, "13 OUT3:%06o 34 OVCTR:%06o 51 CDU Z:%06o R3:[ %c%c%c%c%c%c ]",
OUT::register_OUT3.read(), MEM::readMemory(034), MEM::readMemory(051),
DSP::R3S, DSP::R3D1, DSP::R3D2, DSP::R3D3, DSP::R3D4, DSP::R3D5);
cout << buf << endl;
sprintf(buf, "14 OUT4:%06o 35 TIME2:%06o 52 OPT X:%06o",
OUT::register_OUT4.read(), MEM::readMemory(035), MEM::readMemory(052));
cout << buf << endl;
}
