% abffile = '12504005.abf'
function [Results] = PostBurstAHPonly(abffile,graph_on,start,stop,xminmax,AHP1schoice,channelidx,currentidx)
    
    if nargin ~= 8
        error('Not enough input arguments')
    end
    [~,filename,~] = fileparts(abffile);
    [d,si,h]=abfload(abffile); 
    numsweeps = size(d,3); % number of sweeps
    %% For each sweep
    meansweepdata = zeros(numsweeps,size(d,1));
    for sweep = 1:numsweeps
        Results(sweep).filename = abffile;
        data = [];
        data = d(:,channelidx,sweep);
        timemes = 1:length(data)*(si/1000);
        Results(sweep).data = data;
        Results(sweep).SI = si;
        Results(sweep).currentstimulus = d(:,currentidx,sweep);
        %% Get baseline data
        [Results(sweep).baseline_potential, Results(sweep).baseline_potentialstd] = baseline(data,start,stop);
        Results(sweep).baseline_timerange = [start*(si/1000); stop*(si/1000)]; % need to convert to time. 
        meantracebl(sweep,1) = Results(sweep).baseline_potential;
        Results(sweep).current = mean(d(start:stop,currentidx,sweep));
        %% Find peak relative to holding potential
        thresh = -10;
        [pks, loc] = findpeaks(data,'minpeakheight',thresh);
        %% CHeck to make sure peaks aren't occuring within 1ms of each other
        IPI = diff(loc);%
        violates = [];
        violates = find(IPI < (1000/si));
        if ~isempty(violates)
            violates(:,2) = violates + 1;
            for i = 1:size(violates,1)
                if pks(violates(i,1)) > pks(violates(i,2))
                    violates(i,1) = 0;
                elseif pks(violates(i,1)) < pks(violates(i,2))
                    violates(i,2) = 0;
                elseif pks(violates(i,1)) == pks(violates(i,2))
                    violates(i,2) = 0;
                end
            end
            violates = violates(:,1) + violates(:,2);
            pks(violates) = [];
            loc(violates) = [];
        end
%         if ~isempty(violates)
%         	violates = violates + 1;
%             pks(violates) = [];
%             loc(violates) = [];
%         end
        %%
        if ~isempty(pks) % if there are spikes
            peak_times = loc*(si/1000);
            peak_amps = pks-Results(sweep).baseline_potential; 
            numspikes = length(peak_times);
%             Results(sweep).num_spikes = numspikes;
%             Results(sweep).peak_times = peak_times;
%             Results(sweep).peak_idx = loc;
%             Results(sweep).peak_amplitudes = pks;
%             Results(sweep).peak_to_baseline = peak_amps;
%             
%             wind = 10/(si/1000); % look into 10ms past peak points
%             FastAHP = [];
%             for i = 1:numspikes
%                 pklocation = loc(i);
%                 if length(data) < (pklocation+wind)
%                     stoppage = length(data);
%                 else
%                     stoppage = pklocation+wind;
%                 end
%                 [FastAHP(i,1) FastAHP(i,2)] = min(data(pklocation:stoppage));
%                 FastAHP(i,2) = FastAHP(i,2) + pklocation;
%             end
%             Results(sweep).FastAHP_Voltage = FastAHP(:,1);
%             Results(sweep).FastAHP_Time = FastAHP(:,2)*(si/1000);
%             Results(sweep).FastAHP_Baseline = FastAHP(:,1) - Results(sweep).baseline_potential;
%             %% Threshold
%             [Results(sweep).threshold_time, Results(sweep).threshold_amplitude,Results(sweep).threshold_index,...
%                 Results(sweep).dvdtthreshold,Results(sweep).dvdt1,Results(sweep).dvdt2] = ...
%                 SpikeThreshold(data,dvdtthreshold,si,numspikes,xminmax,sweep,0);
%             % plot the results with the fast AHP and peaks as well
%             Results(sweep).threshold_baseline = Results(sweep).threshold_amplitude - Results(sweep).baseline_potential;
            if graph_on == 1
            	fff = figure;
                plot(data)
%                 plot(1:length(data),data,'b',loc,pks,'r*')
                hold on
%                 plot(1:length(data),data,'b',Results(sweep).threshold_index,Results(sweep).threshold_amplitude,'m*')
                xlim([xminmax])
%                 plot(FastAHP(:,2),FastAHP(:,1),'g.')
                xlabel(sprintf('Points (multiply by %g for ms)',si/1000 ))
                ylabel('Volts')
%                 movegui('northwest')
                title(sprintf('Sweep %g File:%s',sweep,filename))
            end
%             %% Spikewidth from Baseline
%             for i = 1:numspikes
%                 threshold = (peak_amps(i)/2) + Results(sweep).baseline_potential;
%                 pklocation = loc(i);
%                 [Results(sweep).SpikeWidth_Baseline(i,1), ~, ~] = halfwidth(threshold,pklocation,data,si);
%             end     
%             %% Spikewidth from Threshold
%             for i = 1:numspikes
%                 threshold = ((peaks(i) - Results(sweep).threshold_amplitude(i))/2) + Results(sweep).threshold_amplitude(i);
%                 pklocation = loc(i); % need to go back to points 
%                 [Results(sweep).SpikeWidth_Threshold(i,1), ~,~] = halfwidth(threshold, pklocation,data,si);
%             end    
%             %% Spikewidth from First Spikewidth-Baseline 
%             firstthreshold = (peak_amps(1)/2) + Results(sweep).baseline_potential;
%             for i = 1:numspikes
%                 pklocation = loc(i); % need to go back to points 
%                 [Results(sweep).SpikeWidth_FirstSpike(i,1), ~,~] = halfwidth(firstthreshold, pklocation,data,si);
%             end    
                
            %% Calculate ISI
%             if numspikes > 1
%                 Results(sweep).ISI = diff(peak_times) ;
%             else
%                 Results(sweep).ISI = NaN;
%             end
            %% Start index for search Post-Burst AHP - if there is spikes, search from last spike
%             startsearch = peak_times(1,1)/(si/1000); % start search from first spike
            startsearch = peak_times(end,1)/(si/1000); % start search from last spike
        else
            % Start index for search Post-Burst AHP
            startsearch = stop; % if there isn't any spikes, start from end of baseline period
            % All results based on spikes are blank
%             Results(sweep).num_spikes = NaN;
%             Results(sweep).peak_times = NaN;
%             Results(sweep).peak_idx = NaN;
%             Results(sweep).peak_amplitudes = NaN;
%             Results(sweep).peak_to_baseline = NaN;
%             Results(sweep).FastAHP_Voltage = NaN;
%             Results(sweep).FastAHP_Time = NaN;
%             Results(sweep).FastAHP_Baseline = NaN;
%             Results(sweep).threshold_time = NaN;
%             Results(sweep).threshold_amplitude = NaN;
%             Results(sweep).threshold_index = NaN;
%             Results(sweep).threshold_baseline = NaN;
%             Results(sweep).dvdtthreshold = NaN;
%             Results(sweep).dvdt1 = NaN;
%             Results(sweep).dvdt2= NaN;
%             Results(sweep).SpikeWidth_Baseline = NaN;
%             Results(sweep).SpikeWidth_Threshold = NaN;
%             Results(sweep).SpikeWidth_FirstSpike = NaN;
%             Results(sweep).ISI = NaN;
        end
            
        %% Post-Burst AHP Start 
        [AHPstartoutput] = PostBurstAHPstart(data,si,Results(sweep).baseline_potential,startsearch);
        Results(sweep).AHPstart_time = AHPstartoutput.AHPstart_time;
%         Results(sweep).AHPpeak_negative_amplitude = AHPstartoutput.AHPpeak_negative_amplitude;
%         Results(sweep).AHPpeak_negative_time = AHPstartoutput.AHPpeak_negative_time;

        if AHP1schoice(1,1) == 1 % NEW CODE ADDED 9/17/13 BY SH
            [Results(sweep).AHP1s_mean_amplitude_nonbaseline, Results(sweep).AHP1s_time, Results(sweep).AHP1s_idx] = AHP1sec5spikemethod(data,si,AHP1schoice(2,1)) ;
        elseif AHP1schoice(1,1) == 2
            [Results(sweep).AHP1s_mean_amplitude_nonbaseline, Results(sweep).AHP1s_time, Results(sweep).AHP1s_idx] = AHP1secCurrentStepmethod(data,Results(sweep).currentstimulus,si)  ;
        end
        Results(sweep).AHP1s_mean_amplitude = Results(sweep).AHP1s_mean_amplitude_nonbaseline - Results(sweep).baseline_potential;
        % END OF NEW CODE ADDED 9/17/13 BY SH

% % % % % % % % % %         Results(sweep).AHP1s_time = AHPstartoutput.AHP1s_time;
% % % % % % % % % %         Results(sweep).AHP1s_mean_amplitude = AHPstartoutput.AHP1s_mean_amplitude - Results(sweep).baseline_potential;
% % % % % % % % % %         Results(sweep).AHP1s_mean_amplitude_nonbaseline = AHPstartoutput.AHP1s_mean_amplitude;
        Results(sweep).AHPstartData = AHPstartoutput;
        if graph_on == 1
            blline = zeros(1,length(data));
            blline(:) = Results(sweep).baseline_potential;
            xx = zeros(1,length(data));
            xx(1,AHPstartoutput.AHPstart_idx) = min(get(gca,'ylim')); %-100;
            figure(fff)
            hold on
            plot(blline)
            bar(xx)
            xlim([0 length(data)])
        end
        
        %% Post-Burst AHP Return
        if ~isempty(Results(sweep).AHPstart_time) %if there is AHP start, then run next code 
        	[AHPendoutput] = PostBurstAHPend(data,si,Results(sweep).baseline_potential,Results(sweep).AHPstart_time);
            Results(sweep).AHPend_time = AHPendoutput.AHPend_time;
            Results(sweep).AHPend_amplitude = AHPendoutput.AHPend_amplitude;
            Results(sweep).AHPduration = AHPendoutput.AHPduration;
            Results(sweep).AHP_AreaUnderCurve = AHPendoutput.AHP_AreaUnderCurve;
            Results(sweep).AHPenddata = AHPendoutput;
            if ~isempty(AHPendoutput.AHPend_idx) && graph_on == 1
            	blline = zeros(1,length(data));
                blline(:) = Results(sweep).baseline_potential;
                xx = zeros(1,length(data));
                xx(1,AHPendoutput.AHPend_idx) = min(get(gca,'ylim')); %-100;
                figure(fff)
                hold on
                plot(blline)
                bar(xx)
                xlim([0 length(data)])
            end
        else
            Results(sweep).AHPend_time = [];
            Results(sweep).AHPend_amplitude = [];
            Results(sweep).AHPduration = [];
            Results(sweep).AHP_AreaUnderCurve = [];
            Results(sweep).AHPenddata = [];
        end
        %% Find Peak Negative of AHP
        AHPstart_idx = AHPstartoutput.AHPstart_idx;
        AHPstart_idx = str2double(sprintf('%16.f',AHPstart_idx));
        AHPend_idx = AHPendoutput.AHPend_idx;
        AHPend_idx = str2double(sprintf('%16.f',AHPend_idx));
        [AHPpeak_amplitude, C] = min(data(AHPstart_idx+1:AHPend_idx));
        AHPpeak_idx = C+AHPstart_idx;
        Results(sweep).AHPpeak_negative_amplitude = AHPpeak_amplitude - Results(sweep).baseline_potential;
        Results(sweep).AHPpeak_negative_amplitude_nonbaseline = AHPpeak_amplitude;
        Results(sweep).AHPpeak_negative_time = AHPpeak_idx*(si/1000);
        Results(sweep).AHPpeak_negative_idx = AHPpeak_idx;
        if graph_on == 1
            xx = zeros(1,length(data));
            xx(1,AHPpeak_idx) = min(get(gca,'ylim')); % -100;
            figure(fff)
            hold on
            bar(xx,'edgecolor','k','facecolor','k')
            xlim([0 length(data)])
        end
        %% Tau 
        if ~isempty(Results(sweep).AHPpeak_negative_time)
            [TAU] = tau(data,si,Results(sweep).baseline_potential,Results(sweep).AHPpeak_negative_time);
            Results(sweep).Tau_duration = TAU.tau_duration;
            Results(sweep).Tau_time = TAU.tau_time;
            Results(sweep).Tau_amplitude = TAU.tau_amplitude;
            Results(sweep).Tau_amplitude_baseline = TAU.tau_amplitude_baseline;
            if ~isempty(Results(sweep).Tau_time) && graph_on == 1
                blline = zeros(1,length(data));
                blline(:) = Results(sweep).Tau_amplitude;
                xx = zeros(1,length(data));
                xx(1,TAU.tau_idx) = min(get(gca,'ylim'));%  -100;
                figure(fff)
                hold on
                plot(blline,'r')
                bar(xx,'edgecolor','r','facecolor','r')
                xlim([0 length(data)])
            end
        else
            Results(sweep).Tau_duration = [];
            Results(sweep).Tau_time = [];
            Results(sweep).Tau_amplitude = [];
            Results(sweep).Tau_amplitude_baseline = [];
        end

            
        %% Prep data for mean trace
        meansweepdata(sweep,:) = data - Results(sweep).baseline_potential;

    end
    
    %% Calculate Post-Burst AHP on the mean Trace
    sweep = numsweeps + 1;    
    meansweep = mean(meansweepdata,1);
    meansweepbl = mean(meansweep(start:stop));
    if graph_on == 1
        mfff = figure;
        plot(meansweep)
        title(sprintf('Mean Sweep File:%s',filename))
        ylabel('Volts')
    %   movegui('northwest')
        xlabel(sprintf('Points (multiply by %g for ms)',si/1000 ))
    end
    Results(1,sweep).data = meansweep;
    Results(1,sweep).baseline_potential = meansweepbl;
    Results(1,sweep).THIS_IS_MEAN_SWEEP = 1;
    Results(1,sweep).SI = si;
    Results(1,sweep).baseline_potentialstd = std(meansweep(start:stop));
    Results(1,sweep).filename = abffile;
	Results(sweep).baseline_timerange = [start*(si/1000); stop*(si/1000)];
% 	Results(sweep).num_spikes = NaN;
%     Results(sweep).peak_times = NaN;
% 	Results(sweep).peak_idx = NaN;
%     Results(sweep).peak_amplitudes = NaN;
%     Results(sweep).peak_to_baseline = NaN;
%     Results(sweep).FastAHP_Voltage = NaN;
%     Results(sweep).FastAHP_Time = NaN;
%     Results(sweep).FastAHP_Baseline = NaN;
%     Results(sweep).threshold_time = NaN;
%     Results(sweep).threshold_amplitude = NaN;
%     Results(sweep).threshold_index = NaN;
%     Results(sweep).threshold_baseline = NaN;
%     Results(sweep).dvdtthreshold = NaN;
%     Results(sweep).dvdt1 = NaN;
%     Results(sweep).dvdt2= NaN;
%     Results(sweep).SpikeWidth_Baseline = NaN;
%     Results(sweep).SpikeWidth_Threshold = NaN;
%     Results(sweep).SpikeWidth_FirstSpike = NaN;
%     Results(sweep).ISI = NaN;
    %% Postburst AHP start for mean sweep
	[mAHPstartoutput] = PostBurstAHPstart(meansweep,si,meansweepbl,stop);
    Results(sweep).AHPstart_time = mAHPstartoutput.AHPstart_time;
%     Results(sweep).AHPpeak_negative_amplitude = mAHPstartoutput.AHPpeak_negative_amplitude;
%     Results(sweep).AHPpeak_negative_time = mAHPstartoutput.AHPpeak_negative_time;

	if AHP1schoice(1,1) == 1 % NEW CODE ADDED 9/17/13 BY SH
        [Results(sweep).AHP1s_mean_amplitude_nonbaseline, Results(sweep).AHP1s_time, Results(sweep).AHP1s_idx] = AHP1sec5spikemethod(meansweep,si,AHP1schoice(2,1)) ;
	elseif AHP1schoice(1,1) == 2
        for e = 1:sweep-1
            meansweepAHP1sidxes(e) = Results(e).AHP1s_idx;
        end
        if length(unique(meansweepAHP1sidxes)) == 1
            Results(sweep).AHP1s_idx = unique(meansweepAHP1sidxes);
        else
            Results(sweep).AHP1s_idx = meansweepAHP1sidxes(1);
            warning('Sweeps have different last current step end time so took 1st one')
        end
        Results(sweep).AHP1s_mean_amplitude_nonbaseline = mean(meansweep(Results(sweep).AHP1s_idx-5:Results(sweep).AHP1s_idx+5));
        Results(sweep).AHP1s_time = Results(sweep).AHP1s_idx * (si/1000);
    end
    Results(sweep).AHP1s_mean_amplitude = Results(sweep).AHP1s_mean_amplitude_nonbaseline - Results(sweep).baseline_potential;
        % END OF NEW CODE ADDED 9/17/13 BY SH

% % % % % % % % % %     Results(sweep).AHP1s_time = mAHPstartoutput.AHP1s_time;
% % % % % % % % % %     Results(sweep).AHP1s_mean_amplitude = mAHPstartoutput.AHP1s_mean_amplitude - Results(sweep).baseline_potential;
% % % % % % % % % %     Results(sweep).AHP1s_mean_amplitude_nonbaseline = mAHPstartoutput.AHP1s_mean_amplitude;
    Results(sweep).AHPstartData = mAHPstartoutput;
	if graph_on == 1
        blline = zeros(1,length(data));
        blline(:) = Results(sweep).baseline_potential;
        xx = zeros(1,length(data));
        xx(1,mAHPstartoutput.AHPstart_idx) = min(get(gca,'ylim')); %-100;
%         xx(1,AHPstartoutput.AHPpeak_negative_idx) = min(get(gca,'ylim')); % -100;
        figure(mfff)
        hold on
        plot(blline)
        bar(xx)
        xlim([0 length(data)])
    end
    %% Postburst AHP return for mean sweep
	if ~isempty(Results(sweep).AHPstart_time) %if there is AHP start, then run next code 
    	[mAHPendoutput] = PostBurstAHPend(meansweep,si,meansweepbl,Results(sweep).AHPstart_time);
        Results(sweep).AHPend_time = mAHPendoutput.AHPend_time;
        Results(sweep).AHPend_amplitude = mAHPendoutput.AHPend_amplitude;
        Results(sweep).AHPduration = mAHPendoutput.AHPduration;
        Results(sweep).AHP_AreaUnderCurve = mAHPendoutput.AHP_AreaUnderCurve;
        Results(sweep).AHPenddata = mAHPendoutput;
        if ~isempty(mAHPendoutput.AHPend_idx) && graph_on == 1
        	blline = zeros(1,length(data));
            blline(:) = Results(sweep).baseline_potential;
            xx = zeros(1,length(data));
            xx(1,mAHPendoutput.AHPend_idx) = min(get(gca,'ylim')); %-100;
            figure(mfff)
            hold on
            plot(blline)
            bar(xx)
            xlim([0 length(data)])
        end
    else
        Results(sweep).AHPend_time = [];
        Results(sweep).AHPend_amplitude = [];
        Results(sweep).AHPduration = [];
        Results(sweep).AHP_AreaUnderCurve = [];
        Results(sweep).AHPenddata = [];
    end
        %% Find Peak Negative of AHP
        AHPstart_idx = mAHPstartoutput.AHPstart_idx;
        AHPstart_idx = str2double(sprintf('%16.f',AHPstart_idx));
        AHPend_idx = mAHPendoutput.AHPend_idx;
        AHPend_idx = str2double(sprintf('%16.f',AHPend_idx));
        [AHPpeak_amplitude, C] = min(meansweep(AHPstart_idx+1:AHPend_idx));
        AHPpeak_idx = C+AHPstart_idx;
        Results(sweep).AHPpeak_negative_amplitude = AHPpeak_amplitude - Results(sweep).baseline_potential;
        Results(sweep).AHPpeak_negative_amplitude_nonbaseline = AHPpeak_amplitude;
        Results(sweep).AHPpeak_negative_time = AHPpeak_idx*(si/1000);
        Results(sweep).AHPpeak_negative_idx = AHPpeak_idx;
        if graph_on == 1
            xx = zeros(1,length(data));
            xx(1,AHPpeak_idx) = min(get(gca,'ylim')); % -100;
            figure(mfff)
            hold on
            bar(xx,'edgecolor','k','facecolor','k')
            xlim([0 length(data)])
        end
    %% Postburst AHP Tau for mean sweep
	if ~isempty(Results(sweep).AHPpeak_negative_time)
        [mTAU] = tau(meansweep,si,meansweepbl,Results(sweep).AHPpeak_negative_time);
        Results(sweep).Tau_duration = mTAU.tau_duration;
        Results(sweep).Tau_time = mTAU.tau_time;
        Results(sweep).Tau_amplitude = mTAU.tau_amplitude;
        Results(sweep).Tau_amplitude_baseline = mTAU.tau_amplitude_baseline;
        if ~isempty(Results(sweep).Tau_time) && graph_on == 1
        	blline = zeros(1,length(data));
            blline(:) = Results(sweep).Tau_amplitude;
            xx = zeros(1,length(data));
            xx(1,mTAU.tau_idx) = min(get(gca,'ylim'));%  -100;
            figure(mfff)
            hold on
            plot(blline,'r')
            bar(xx,'edgecolor','r','facecolor','r')
            xlim([0 length(data)])
        end
    else
        Results(sweep).Tau_duration = [];
        Results(sweep).Tau_time = [];
    	Results(sweep).Tau_amplitude = [];
        Results(sweep).Tau_amplitude_baseline = [];
	end

        
    
    
end