https://github.com/virtualagc/virtualagc
Tip revision: 4e5d304eb7cd5589b924ffb8b423b6f15511b35d authored by Ron Burkey on 20 October 2018, 17:47:00 UTC
The sample Block I AGC program TRIVIUM, found at the very end of one of
The sample Block I AGC program TRIVIUM, found at the very end of one of
Tip revision: 4e5d304
BURN,_BABY,_BURN_--_MASTER_IGNITION_ROUTINE.agc
### FILE="Main.annotation"
## Copyright: Public domain.
## Filename: BURN,_BABY,_BURN_--_MASTER_IGNITION_ROUTINE.agc
## Purpose: A section of Luminary revision 116.
## It is part of the source code for the Lunar Module's (LM)
## Apollo Guidance Computer (AGC) for Apollo 12.
## This file is intended to be a faithful transcription, except
## that the code format has been changed to conform to the
## requirements of the yaYUL assembler rather than the
## original YUL assembler.
## Reference: pp. 723-744
## Assembler: yaYUL
## Contact: Ron Burkey <info@sandroid.org>.
## Website: www.ibiblio.org/apollo/index.html
## Mod history: 2017-01-22 MAS Created from Luminary 99.
## 2017-03-09 RSB Transcribed, and then proofed comment-text using
## 3-way diff vs Luminary 99 and Luminary 131.
## (Admittedly, the former is more for detecting errors
## in Luminary 99 than the other way around.)
## 2017-03-16 RSB Comment-text fixes identified in 5-way
## side-by-side diff of Luminary 69/99/116/131/210.
## 2017-03-19 HG Fix operand P63ZOOM --> ZOOM
## P40ZOOM --> ZOOM
## TCF -6 --> TCF -5
## Page 723
BANK 36
SETLOC P40S
BANK
EBANK= WHICH
COUNT* $$/P40
# THE MASTER IGNITION ROUTINE IS DESIGNED FOR USE BY THE FOLLOWING LEM PROGRAMS: P12, P40, P42, P61, P63.
# IT PERFORMS ALL FUNCTIONS IMMEDIATELY ASSOCIATED WITH APS OR DPS IGNITION: IN PARTICULAR, EVERYTHING LYING
# BETWEEN THE PRE-IGNITION TIME CHECK -- ARE WE WITHIN 45 SECONDS OF TIG? -- AND TIG + 26 SECONDS, WHEN DPS
# PROGRAMS THROTTLE UP.
# VARIATIONS AMONG PROGRAMS ARE ACCOMODATED BY MEANS OF TABLES CONTAINING CONSTANTS (FOR AVEGEXIT, FOR
# WAITLIST, FOR PINBALL) AND TCF INSTRUCTIONS. USERS PLACE THE ADRES OF THE HEAD OF THE APPROPRIATE TABLE
# (OF P61TABLE FOR P61LM, FOR EXAMPLE) IN ERASABLE REGISTER 'WHICH' (E4). THE IGNITION ROUTINE THEN INDEXES BY
# WHICH TO OBTAIN OR EXECUTE THE PROPER TABLE ENTRY. THE IGNITION ROUTINE IS INITIATED BY A TCF BURNBABY,
# THROUGH BANKJUMP IF NECESSARY. THERE IS NO RETURN.
# THE MASTER IGNITION ROUTINE WAS CONCEIVED AND EXECUTED, AND (NOTA BENE) IS MAINTAINED BY ADLER AND EYLES.
# HONI SOIT QUI MAL Y PENSE
# ****************************************
# TABLES FOR THE IGNITION ROUTINE
# ****************************************
# NOLI SE TANGERE
P12TABLE VN 0674 # (0)
TCF ULLGNOT # (1)
TCF COMFAIL3 # (2)
TCF GOCUTOFF # (3)
TCF TASKOVER # (4)
TCF P12SPOT # (5)
DEC 0 # (6) NO ULLAGE
EBANK= WHICH
2CADR SERVEXIT # (7)
TCF DISPCHNG # (11)
TCF WAITABIT # (12)
TCF P12IGN # (13)
P40TABLE VN 0640 # (0)
TCF ULLGNOT # (1)
TCF COMFAIL4 # (2)
TCF GOPOST # (3)
TCF TASKOVER # (4)
TCF P40SPOT # (5)
## Page 724
DEC 2240 # (6)
EBANK= OMEGAQ
2CADR STEERING # (7)
TCF P40SJUNK # (11)
TCF WAITABIT # (12)
TCF P40IGN # (13)
TCF REP40ALM # (14)
P41TABLE TCF P41SPOT # (5)
DEC -1 # (6)
EBANK= OMEGAQ
2CADR CALCN85 # (7)
TCF COMMON # (11)
TCF TIGTASK # (12)
P42TABLE VN 0640 # (0)
TCF WANTAPS # (1)
TCF COMFAIL4 # (2)
TCF GOPOST # (3)
TCF TASKOVER # (4)
TCF P42SPOT # (5)
DEC 2640 # (6)
EBANK= OMEGAQ
2CADR STEERING # (7)
TCF P40SJUNK # (11)
TCF WAITABIT # (12)
TCF P42IGN # (13)
TCF P42STAGE # (14)
P63TABLE VN 0662 # (0)
TCF ULLGNOT # (1)
TCF COMFAIL3 # (2)
TCF V99RECYC # (3)
TCF TASKOVER # (4)
TCF P63SPOT # (5)
DEC 2240 # (6)
EBANK= WHICH
2CADR SERVEXIT # (7)
TCF DISPCHNG # (11)
TCF WAITABIT # (12)
## Page 725
TCF P63IGN # (13)
ABRTABLE VN 0663 # (0)
TCF ULLGNOT # (1)
TCF COMFAIL3 # (2)
TCF GOCUTOFF # (3)
TCF TASKOVER # (4)
NOOP # (5)
NOOP # (6)
NOOP # (7)
NOOP
TCF DISPCHNG # (11)
TCF WAITABIT # (12)
TCF ABRTIGN # (13)
# ****************************************
# GENERAL PURPOSE IGNITION ROUTINES
# ****************************************
BURNBABY TC PHASCHNG # GROUP 4 RESTARTS HERE
OCT 04024
CAF ZERO # EXTIRPATE JUNK LEFT IN DVTOTAL
TS DVTOTAL
TS DVTOTAL +1
TC BANKCALL # P40AUTO MUST BE BANKCALLED EVEN FROM ITS
CADR P40AUTO # OWN BANK TO SET UP RETURN PROPERLY
B*RNB*B* EXTEND
DCA TIG # STORE NOMINAL TIG FOR OBLATENESS COMP.
DXCH GOBLTIME # AND FOR P70 OR P71.
INHINT
TC IBNKCALL
CADR ENGINOF3
RELINT
INDEX WHICH
TCF 5
P42SPOT = P40SPOT # (5)
P12SPOT = P40SPOT # (5)
P63SPOT = P41SPOT # (5) IN P63 CLOKTASK ALREADY GOING
P40SPOT CS CNTDNDEX # (5)
## Page 726
TC BANKCALL # MUST BE BANKCALLED FOR GENERALIZED
CADR STCLOK2 # RETURN
P41SPOT TC INTPRET # (5)
DLOAD DSU
TIG
D29.9SEC
STCALL TDEC1
INITCDUW
BOFF CALL
MUNFLAG
GOMIDAV
CSMPREC
VLOAD MXV
VATT1
REFSMMAT
VSR1
STOVL V(CSM) # CSM VELOCITY - M/CS*2(7)
RATT1
VSL4 MXV
REFSMMAT
STCALL R(CSM) # CSM POSITION - M*2(24)
MUNGRAV
STODL G(CSM) # CSM GRAVITY VEC. - M/CS*2(7)
TAT
STORE TDEC1 # RELOAD TDEC1 FOR MIDTOAV.
GOMIDAV CALRB
MIDTOAV1
TCF CALLT-35 # MADE IT IN TIME.
EXTEND # TIG WAS SLIPPED, SO RESET TIG TO 29.9
DCA PIPTIME1 # SECONDS AFTER THE TIME TO WHICH WE DID
DXCH TIG # INTEGRATE.
EXTEND
DCA D29.9SEC
DAS TIG
CALLT-35 DXCH MPAC
DXCH SAVET-30 # DELTA-T UNTIL TIG-30
EXTEND
DCS 5SECDP
DAS SAVET-30 # DELTA-T UNTIL TIG-35
EXTEND
DCA SAVET-30
TC LONGCALL
EBANK= TTOGO
2CADR TIG-35
TC PHASCHNG
OCT 20254 # 4.25SPOT FOR TIG-35 RESTART.
## Page 727
TC CHECKMM
DEC 63
TCF ENDOFJOB # NOT P63
CS CNTDNDEX # P63 CAN START DISPLAYING NOW.
TS DISPDEX
TC INTPRET
VLOAD ABVAL
VN1
STORE ABVEL # INITIALIZE ABVEL FOR P63 DISPLAY
EXIT
TCF ENDOFJOB
# ****************************************
TIG-35 CAF 5SEC
TC TWIDDLE
ADRES TIG-30
TC PHASCHNG
OCT 40154 # 4.15SPOT FOR TIG-30 RESTART
CS BLANKDEX # BLANK DSKY FOR 5 SECONDS
TS DISPDEX
INDEX WHICH
CS 6 # CHECK ULLAGE TIME.
EXTEND
BZMF TASKOVER
CAF 4.9SEC # SET UP TASK TO RESTORE DISPLAY AT TIG-30
TC TWIDDLE
ADRES TIG-30.1
CAF PRIO17 # A NEGATIVE ULLAGE TIME INDICATES P41, IN
TC NOVAC # WHICH CASE WE HAVE TO SET UP A JOB TO
EBANK= TTOGO # BLANK THE DSKY FOR FIVE SECONDS, SINCE
2CADR P41BLANK # CLOKJOB IS NOT RUNNING DURING P41.
TCF TASKOVER
P41BLANK TC BANKCALL # BLANK DSKY.
CADR CLEANDSP
TCF ENDOFJOB
TIG-30.1 CAF PRIO17 # SET UP JOB TO RESTORE DISPLAY AT TIG-30
TC NOVAC
EBANK= TTOGO
2CADR TIG-30A
TCF TASKOVER
## Page 728
TIG-30A CAF V16N85B
TC BANKCALL # RESTORE DISPLAY.
CADR REGODSP # REGODSP DOES A TCF ENDOFJOB
# *****************************************
TIG-30 CAF S24.9SEC
TC TWIDDLE
ADRES TIG-5
CS CNTDNDEX # START UP CLOKTASK AGAIN
TS DISPDEX
INDEX WHICH # PICK UP APPROPRIATE ULLAGE - ON TIME
CAF 6
EXTEND
BZMF ULLGNOT # DON'T SET UP ULLAGE IF DT IS NEG OR ZERO
TS SAVET-30 # SAVE DELTA-T FOR RESTART
TC TWIDDLE
ADRES ULLGTASK
CA THREE # RESTART PROTECT ULLGTASK (1.3SPOT)
TS L
CS THREE
DXCH -PHASE1
CS TIME1
TS TBASE1
INDEX WHICH
TCF 1
WANTAPS CS FLGWRD10 # (1) FOR P42 ENSURE APSFLAG IS SET. IF IT
MASK APSFLBIT # WASN'T SET, DAP WILL BE INITIALIZED TO
ADS FLGWRD10 # ASCENT VALUES BY 1/ACCS IN 2 SECONDS.
ULLGNOT EXTEND # (1)
INDEX WHICH
DCA 7 # LOAD AVEGEXIT WITH APPROPRIATE 2CADR
DXCH AVEGEXIT
CAF TWO # 4.2SPOT RESTARTS IMMEDIATELY AT REDO4.2
TS L
CS TWO # AND ALSO AT TIG-5 AT THE CORRECT TIME.
DXCH -PHASE4
CS TIME1
TS TBASE4 # SET TBASE4 FOR TIG-5 RESTART
REDO2.17 EXTEND
## Page 729
DCA NEG0 # CLEAR OUT GROUP 2 SO LAMBERT CAN START
DXCH -PHASE2 # IF NEEDED.
REDO4.2 CCS PHASE5 # IS SERVICER GOING?
TCF TASKOVER # YES, DON'T START IT UP AGAIN.
TC POSTJUMP
CADR PREREAD # PREREAD ENDS THIS TASK
# ****************************************
ULLGTASK TC ONULLAGE # THIS COMES AT TIG-7.5 OR TIG-3.5
TC PHASCHNG
OCT 1
TCF TASKOVER
# ****************************************
TIG-5 EXTEND
DCA NEG0 # INSURE THAT GROUP 3 IS INACTIVE.
DXCH -PHASE3
CAF 5SEC
TC TWIDDLE
ADRES TIG-0
TC DOWNFLAG # RESET IGNFLAG AND ASTNFLAG
ADRES IGNFLAG # FOR LIGHT-UP LOGIC
TC DOWNFLAG
ADRES ASTNFLAG
TC DOWNFLAG
ADRES ZOOMFLAG
INDEX WHICH
TCF 11
P40SJUNK CCS PHASE3 # (11) P40 AND P42. S40.13 IN PROGRESS?
TCF DISPCHNG # YES
CAF PRIO20
TC FINDVAC
EBANK= TTOGO
2CADR S40.13
TC PHASCHNG # 3.5SPOT FOR S40.13
OCT 00053
## Page 730
DISPCHNG CS VB99DEX # (11)
TS DISPDEX
COMMON TC PHASCHNG # RESTART TIG-0 (4.7SPOT)
OCT 40074
TCF TASKOVER
# ****************************************
TIG-0 CS FLAGWRD7 # SET IGNFLAG SINCE TIG HAS ARRIVED
MASK IGNFLBIT
ADS FLAGWRD7
TC CHECKMM # IN P63 CASE, THROTTLE-UP IS ZOOMTIME
DEC 63 # AFTER NOMINAL IGNITION, NOT ACTUAL
TCF IGNYET?
CA ZOOMTIME
TC WAITLIST
EBANK= DVCNTR
2CADR ZOOM
TC 2PHSCHNG
OCT 40033
OCT 05014
OCT 77777
IGNYET? CAF ASTNBIT # CHECK ASTNFLAG: HAS ASTRONAUT RESPONDED
MASK FLAGWRD7 # TO OUR ENGINE ENABLE REQUEST?
EXTEND
INDEX WHICH
BZF 12 # BRANCH IF HE HAS NOT RESPONDED YET
IGNITION CS FLAGWRD5 # INSURE ENGONFLG IS SET.
MASK ENGONBIT
ADS FLAGWRD5
CS PRIO30 # TURN ON THE ENGINE.
EXTEND
RAND DSALMOUT
AD BIT13
EXTEND
WRITE DSALMOUT
EXTEND # SET TEVENT FOR DOWNLINK
DCA TIME2
DXCH TEVENT
CS PULSES # MAKE SURE THAT DAP IS NOT IN MINIMUM
MASK DAPBOOLS # IMPULSE MODE IN P12,P40,P42,AND P63
TS DAPBOOLS
## Page 731
EXTEND # UPDATE TIG USING TGO FROM S40.13
DCA TGO
DXCH TIG
EXTEND
DCA TIME2
DAS TIG
CS FLUNDBIT # PERMIT GUIDANCE LOOP DISPLAYS
MASK FLAGWRD8
TS FLAGWRD8
INDEX WHICH
TCF 13
P63IGN EXTEND # (13) INITIATE BURN DISPLAYS
DCA LUNLANAD
DXCH AVGEXIT
CA Z # ASSASSINATE CLOKTASK
TS DISPDEX
CS FLAGWRD9 # SET FLAG FOR P70-P71
MASK LETABBIT
ADS FLAGWRD9
CS FLAGWRD7 # SET SWANDISP TO ENABLE R10.
MASK SWANDBIT
ADS FLAGWRD7
EXTEND # INITIALIZE TIG FOR P70 AND P71.
DCA TIME2
DXCH TIG
CAF ZERO # INITIALIZE WCHPHASE AND FLPASSO
TS WCHPHASE
TS WCHPHOLD # ALSO WHCPHOLD
CA TWO
TS FLPASS0
TCF P42IGN
P40IGN CS FLAGWRD5 # (13)
MASK NOTHRBIT
EXTEND
BZF P42IGN
CA ZOOMTIME
TC WAITLIST
EBANK= DVCNTR
2CADR ZOOM
P63IGN1 TC 2PHSCHNG
## Page 732
OCT 40033 # 3.3SPOT FOR ZOOM RESTART.
OCT 05014 # TYPE C RESTARTS HERE IMMEDIATELY
OCT 77777
TCF P42IGN
P12IGN CAF EBANK6
TS EBANK
EBANK= AOSQ
CA IGNAOSQ # INITIALIZE DAP BIAS ACCELERATION
TS AOSQ # ESTIMATES AT P12 IGNITION.
CA IGNAOSR
TS AOSR
CAF EBANK7
TS EBANK
EBANK= DVCNTR
ABRTIGN CA Z # (13) KILL CLOKTASK
TS DISPDEX
EXTEND # CONNECT ASCENT GYIDANCE TO SERVICER.
DCA ATMAGADR
DXCH AVGEXIT
CS FLAGWRD7 # ENABLE R10.
MASK SWANDBIT
ADS FLAGWRD7
P42IGN CS DRIFTBIT # ENSURE THAT POWERED-FLIGHT SWITCHING
MASK DAPBOOLS # CURVES ARE USED.
TS DAPBOOLS
CAF IMPULBIT # EXAMINE IMPULSE SWITCH
MASK FLAGWRD2
CCS A
TCF IMPLBURN
DVMONCON TC DOWNFLAG
ADRES IGNFLAG # CONNECT DVMON
TC DOWNFLAG
ADRES ASTNFLAG
TC DOWNFLAG
ADRES IDLEFLAG
TC PHASCHNG
OCT 40054
TC FIXDELAY # TURN ULLAGE OFF HALF A SECOND AFTER
DEC 50 # LIGHT UP.
## Page 733
ULLAGOFF TC NOULLAGE
WAITABIT EXTEND # KILL GROUP 4
DCA NEG0
DXCH -PHASE4
TCF TASKOVER
TIGTASK TC POSTJUMP # (12)
CADR TIGTASK1
# ****************************************
BANK 31
SETLOC P40S3
BANK
COUNT* $$/P40
TIGTASK1 CAF PRIO16
TC NOVAC
EBANK= TRKMKCNT
2CADR TIGNOW
TC DOWNFLAG
ADRES PULSEFLG
TC PHASCHNG
OCT 6 # KILL GROUP 6.
TCF TASKOVER
# ****************************************
ZOOM TC CHECKMM # P40 OR P63?
DEC 63
TCF P40ZOOM
P63ZOOM TC UPFLAG # INDICATE THAT THROTTLE-UP HAS COME
ADRES ZOOMFLAG
TC IBNKCALL
CADR FLATOUT
TCF P40ZOOMA
P40ZOOM CAF BIT13
TS THRUST
CAF BIT4
## Page 734
EXTEND
WOR CHAN14
P40ZOOMA TC PHASCHNG
OCT 3
TCF TASKOVER
BANK 36
SETLOC P40S
BANK
COUNT* $$/P40
# ****************************************
COMFAIL TC UPFLAG # (15)
ADRES IDLEFLAG
TC UPFLAG # SET FLAG TO SUPPRESS CONFLICTING DISPLAY
ADRES FLUNDISP
CAF FOUR # RESET DVMON
TS DVCNTR
CCS PHASE6 # CLOCKTASK ACTIVE?
TCF +3 # YES
TC BANKCALL # OTHERWISE, START IT UP
CADR STCLOK1
+3 CS VB97DEX
TS DISPDEX
TC PHASCHNG # TURN OFF GROUP 4.
OCT 00004
TCF ENDOFJOB
COMFAIL1 INDEX WHICH
TCF 2
COMFAIL3 CA Z # (15) KILL CLOKTASK USING Z
TCF +2
COMFAIL4 CS CNTDNDEX
TS DISPDEX
TC DOWNFLAG # RECONNECT DV MONITOR
ADRES IDLEFLAG
TC DOWNFLAG # PERMIT GUIDANCE LOOP DISPLAYS
ADRES FLUNDISP
TCF ENDOFJOB
COMFAIL2 TC PHASCHNG # KILL ZOOM RESTART PROTECTION
OCT 00003
## Page 735
INHINT
TC KILLTASK # KILL ZOOM, IN CASE IT'S STILL TO COME
CADR ZOOM
TC IBNKCALL # COMMAND ENGINE OFF
CADR ENGINOF4
TC UPFLAG # SET THE DRIFT BIT FOR THE DAP.
ADRES DRIFTDFL
TC INVFLAG # USE OTHER RCS SYSTEM
ADRES AORBTFLG
TC UPFLAG # TURN ON ULLAGE
ADRES ULLAGFLG
CAF BIT1
INHINT
TC TWIDDLE
ADRES TIG-5
TCF ENDOFJOB
# ****************************************
# SUBROUTINES OF THE IGNITION ROUTINE
# ****************************************
INVFLAG CA Q
TC DEBIT
COM
EXTEND
RXOR LCHAN
TCF COMFLAG
# ****************************************
NOULLAGE CS ULLAGER # MUST BE CALLED IN A TASK OR UNDER INHINT
MASK DAPBOOLS
TS DAPBOOLS
TC Q
# ****************************************
ONULLAGE CS DAPBOOLS # TURN ON ULLAGE. MUST BE CALLED IN
MASK ULLAGER # A TASK OR WHILE INHINTED.
ADS DAPBOOLS
TC Q
# ****************************************
STCLOK1 CA ZERO # THIS ROUTINE STARTS THE COUNT-DOWN
STCLOK2 TS DISPDEX # (CLOKTASK AND CLOKJOB). SETTING
## Page 736
STCLOK3 TC MAKECADR # SETTING DISPDEX POSITIVE KILLS IT.
TS TBASE4 # RETURN SAVE (NOT FOR RESTARTS)
EXTEND
DCA TIG
DXCH MPAC
EXTEND
DCS TIME2
DAS MPAC # HAVE TIG - TIME2, UNDOUBTEDLY A + NUMBER
TC TPAGREE # POSITIVE, SINCE WE PASSED THE
CAF 1SEC # 45 SECOND CHECK
TS Q
DXCH MPAC
MASK LOW5 # RESTRICT MAGNITUDE OF NUMBER IN A
EXTEND
DV Q
CA L # GET REMAINDER
AD TWO
INHINT
TC TWIDDLE
ADRES CLOKTASK
TC 2PHSCHNG
OCT 40036 # 6.3SPOT FOR CLOKTASK
OCT 05024
OCT 13000
CA TBASE4
TC BANKJUMP
CLOKTASK CS TIME1 # SET TBASE6 FOR GROUP 6 RESTART
TS TBASE6
CCS DISPDEX
TCF KILLCLOK
NOOP
CAF PRIO27
TC NOVAC
EBANK= TTOGO
2CADR CLOKJOB
TC FIXDELAY # WAIT A SECOND BEFORE STARTING OVER
DEC 100
TCF CLOKTASK
KILLCLOK EXTEND # KILL RESTART
DCA NEG0
DXCH -PHASE6
## Page 737
TCF TASKOVER
CLOKJOB EXTEND
DCS TIG
DXCH TTOGO
EXTEND
DCA TIME2
DAS TTOGO
INHINT
CCS DISPDEX # IF DISPDEX HAS BEEN SET POSITIVE BY A
TCF ENDOFJOB # TASK OR A HIGHER PRIORITY JOB SINCE THE
TCF ENDOFJOB # LAST CLOKTASK, AVOID USING IT AS AN
COM # INDEX.
RELINT # ***** DISPDEX MUST NEVER BE -0 *****
INDEX A
TCF DISPNOT -1 # (-1 DUE TO EFFECT OF CCS)
VB97DEX = OCT35 # NEGATIVE OF THIS IS PROPER FOR DISPDEX
-35 CS ZERO # INDICATE VERB 97 PASTE
TS NVWORD1
CA NVWORD +2 # NVWROD+2 CONTAINS V06 & APPROPRIATE NOUN
TC BANKCALL
CADR CLOCPLAY
TCF STOPCLOK # TERMINATE CLOKTASK ON THE WAY TO P00H
TCF COMFAIL1
TCF COMFAIL2
# THIS DISPLAY IS CALLED VIA ASTNCLOK
-25 CAF V06N61 # IT IS PRIMARILY USED BY THE CREW IN P63
TC BANKCALL # TO RESET HIS EVENT TIMER TO AGREE WITH
CADR REFLASH # TIG.
TCF STOPCLOK
TCF ASTNRETN
TCF -5
CNTDNDEX = LOW4 # OCT17: NEGATIVE PROPER FOR DISPDEX
-17 INDEX WHICH # THIS DISPLAY COMES UP AT ONE SECOND
CAF 0 # INTERVALS. IT IS NORMALLY OPERATED
TC BANKCALL # BETWEEN TIG-30 SECONDS AND TIG-5 SECONDS
CADR REGODSP # REGODSP DOES ITS OWN TCF ENDOFJOB
VB99DEX = ELEVEN # OCT13: NEGATIVE PROPER FOR DISPDEX
V99RECYC EQUALS
-13 CS BIT9 # INDICATE VERB 99 PASTE
TS NVWORD1
## Page 738
INDEX WHICH # THIS IS THE "PLEASE ENABLE ENGINE"
CAF 0 # DISPLAY; IT IS INITIATED AT TIG-5 SEC.
TC BANKCALL # THE DISPLAY IS A V99NXX, WHERE XX IS THE
CADR CLOCPLAY # NOUN THAT HAD PREVIOUSLY BEEN DISPLAYED
TCF STOPCLOK # TERMINATE GOTOPOOH TURNS OFF ULLAGE.
TCF *PROCEED
TCF *ENTER
BLANKDEX = TWO # NEGATIVE OF THIS IS PROPER FOR DISPDEX
-2 TC BANKCALL # BLANK DSKY. THE DSKY IS BLANKED FOR
CADR CLEANDSP # 5 SECONDS AT TIG-35 TO INDICATE THAT
DISPNOT TCF ENDOFJOB # AVERAGE G IS STARTING.
STOPCLOK TC NULLCLOK # STOP CLOKTASK & TURN OFF ULLAGE ON THE
TCF GOTOPOOH # WAY TO P00 (GOTOPOOH RELINTS)
NULLCLOK INHINT
EXTEND
QXCH P40/RET
TC NOULLAGE # TURN OFF ULLAGE ...
TC KILLTASK # DON'T LET IT COME ON, EITHER ...
CADR ULLGTASK
TC PHASCHNG # NOT EVEN IF THERE'S A RESTART.
OCT 1
CA Z # KILL CLOKTASK
TS DISPDEX
TC P40/RET
ASTNRETN TC PHASCHNG
OCT 04024
CAF ZERO # STOP DISPLAYING BUT KEEP RUNNING.
TS DISPDEX
CAF PRIO13
TC FINDVAC
EBANK= STARIND
2CADR ASTNRET
TCF ENDOFJOB
*PROCEED TC UPFLAG
ADRES ASTNFLAG
TCF IGNITE
*ENTER INHINT
## Page 739
INDEX WHICH
TCF 3
GOPOST CAF PRIO12 # (3) MUST BE LOWER PRIORITY THAN CLOKJOB
TC FINDVAC
EBANK= TTOGO
2CADR POSTBURN
INHINT # SET UP THE DAP FOR COASTING FLIGHT.
TC IBNKCALL
CADR ALLCOAST
TC NULLCLOK
TC PHASCHNG # 4.13 RESTART FOR POSTBURN
OCT 00134
TCF ENDOFJOB
GOCUTOFF CAF PRIO17 # (3)
TC FINDVAC
EBANK= TGO
2CADR CUTOFF
TC DOWNFLAG
ADRES FLUNDISP
INHINT # SET UP THE DAP FOR COASTING FLIGHT.
TC IBNKCALL
CADR ALLCOAST
TC NULLCLOK
TC PHASCHNG
OCT 07024
OCT 17000
EBANK= TGO
2CADR CUTOFF
TCF ENDOFJOB
IGNITE CS FLAGWRD7 # (2)
MASK IGNFLBIT
CCS A
TCF IGNITE1
CAF BIT1
INHINT
TC TWIDDLE
ADRES IGNITION
CAF OCT23 # IMMEDIATE RESTART AT IGNITION.
## Page 740
TS L
COM
DXCH -PHASE4
IGNITE1 CS CNTDNDEX # RESTORE OLD DISPLAY.
TS DISPDEX
TCF ENDOFJOB
# ****************************************
P40ALM TC ALARM # PROGRAM SELECTION NOT CONSISTENT WITH
OCT 1706 # VEHICLE CONFIGURATION
REP40ALM CAF V05N09 # (14)
TC BANKCALL
CADR GOFLASH
TCF GOTOPOOH # V34E TERMINATE
TCF +2 # PROCEED CHECK FOR P42
TCF REP40ALM # V32E REDISPLAY ALARM
INDEX WHICH # FOR P42, ALLOW CREW TO PROCEED EVEN
TCF 14 # THOUGH VEHICLE IS UNSTAGED
# ****************************************
BANK 31
SETLOC P40S2
BANK
COUNT* $$/P40
P40AUTO TC MAKECADR # HELLO THERE.
TS TEMPR60 # FOR GENERALIZED RETURN TO OTHER BANKS.
P40A/P TC BANKCALL # SUBROUTINE TO CHECK PGNCS CONTROL
CADR G+N,AUTO # AND AUTO STABILIZATION MODES
CCS A # +0 INDICATES IN PGNCS, IN AUTO
TCF TURNITON # + INDICATES NOT IN PGNCS AND/OR AUTO
CAF APSFLBIT # ARE WE ON THE DESCENT STAGE?
MASK FLGWRD10
CCS A
TCF GOBACK # RETURN
CAF BIT5 # YES, CHECK FOR AUTOTHROTTLE MODE
EXTEND
RAND CHAN30
EXTEND
BZF GOBACK # IN AUTOTHROTTLE MODE -- RETURN
## Page 741
TURNITON CAF P40A/PMD # DISPLAY V50N25 R1=203 PLEASE PERFORM
TC BANKCALL # CHECKLIST 203 TURN ON PGNCS ETC.
CADR GOPERF1
TCF GOTOPOOH # V34E TERMINATE
TCF P40A/P # RECYCLE
GOBACK CA TEMPR60
TC BANKJUMP # GOODBYE. COME AGAIN SOON.
P40A/PMD OCT 00203
BANK 36
SETLOC P40S
BANK
COUNT* $$/P40
# ****************************************
# CONSTANTS FOR THE IGNITION ROUTINE
# ****************************************
SERVCADR = P63TABLE +7
P40ADRES ADRES P40TABLE
P41ADRES ADRES P41TABLE -5
P42ADRES ADRES P42TABLE
EBANK= DVCNTR
LUNLANAD 2CADR LUNLAND
EBANK= DVCNTR
ATMAGADR 2CADR ATMAG
? = GOTOPOOH
D29.9SEC 2DEC 2990
S24.9SEC DEC 2490
4.9SEC DEC 490
OCT20 = BIT5
## Page 742
V06N61 VN 0661
## Page 743
# KILLTASK
# MOD NO: NEW PROGRAM
# MOD BY: COVELLI
# FUNCTIONAL DESCRIPTION:
# KILLTASK IS USED TO REMOVE A TASK FROM THE WAITLIST BY SUBSTITUTING A NULL TASK CALLED 'NULLTASK' (OF COURSE),
# WHICH MERELY DOES A TC TASKOVER. IF THE SAME TASK IS SCHEDULED MORE THAN ONCE, ONLY THE ONE WHICH WILL OCCUR
# FIRST IS REMOVED. IF THE TASK IS NOT SCHEDULED, KILLTASK TAKES NO ACTION AND RETURNS WITH NO ALARM. KILLTASK
# LEAVES INTERRUPTS INHIBITED SO CALLER MUST RELINT
# CALLING SEQUENCE:
# L TC KILLTASK IN FIXED-FIXED
# L+1 CADR ???????? CADR (NOT 2CADR) OF TASK TO BE REMOVED.
# L+2 (RELINT) RETURN
# EXIT MODE: AT L+2 OF CALLING SEQUENCE.
# ERASABLE INITIALIZATION= NONE.
# OUTPUT: 2CADR OF NULLTASK IN LST2
# DEBRIS: ITEMP1 - ITEMP4, A, L, Q.
EBANK= LST2
BLOCK 3 # KILLTASK MUST BE IN FIXED-FIXED.
SETLOC FFTAG6
BANK
COUNT* $$/KILL
KILLTASK CA KILLBB
INHINT
LXCH A
INDEX Q
CA 0 # GET CADR.
LXCH BBANK
TCF KILLTSK2 # CONTINUE IN SWITCHED FIXED
EBANK= LST2
KILLBB BBCON KILLTSK2
BANK 27
SETLOC P40S1
BANK
COUNT* $$/KILL
KILLTSK2 LXCH ITEMP2 # SAVE CALLER'S BBANK
## Page 744
INCR Q
EXTEND
QXCH ITEMP1 # RETURN 2CADR IN ITEMP1,ITEMP2
TS ITEMP3 # CADR IS IN A
MASK LOW10
AD BIT11
TS ITEMP4 # GENADR OF TASK
CS LOW10
MASK ITEMP3
TS ITEMP3 # FBANK OF TASK
ZL
ADRSCAN INDEX L
CS LST2
AD ITEMP4 # COMPARE GENADRS
EXTEND
BZF TSTFBANK # IF THEY MATCH, COMPARE FBANKS
LETITLIV CS LSTLIM
AD L
EXTEND # ARE WE DONE?
BZF DEAD # YES - DONE, SO RETURN
INCR L
INCR L
TCF ADRSCAN # CONTINUE LOOP.
DEAD DXCH ITEMP1
DTCB
TSTFBANK CS LOW10
INDEX L
MASK LST2 +1 # COMPARE FBANKS ONLY.
EXTEND
SU ITEMP3
EXTEND
BZF KILLDEAD # MATCH - KILL IT.
TCF LETITLIV # NO MATCH - CONTINUE.
KILLDEAD CA TCTSKOVR
INDEX L
TS LST2 # REMOVE TASK BY INSERTING TASKOVER
TCF DEAD
LSTLIM EQUALS BIT5 # DEC 16
