pwrseq.c
// SPDX-License-Identifier: GPL-2.0
/******************************************************************************
*
* Copyright(c) 2007 - 2011 Realtek Corporation. All rights reserved.
*
******************************************************************************/
#include "pwrseq.h"
#include <rtl8188e_hal.h>
/* drivers should parse below arrays and do the corresponding actions */
/* 3 Power on Array */
struct wl_pwr_cfg rtl8188E_power_on_flow[RTL8188E_TRANS_CARDEMU_TO_ACT_STEPS +
RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_CARDEMU_TO_ACT
RTL8188E_TRANS_END
};
/* 3Radio off Array */
struct wl_pwr_cfg rtl8188E_radio_off_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_ACT_TO_CARDEMU
RTL8188E_TRANS_END
};
/* 3Card Disable Array */
struct wl_pwr_cfg rtl8188E_card_disable_flow
[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_ACT_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_CARDDIS
RTL8188E_TRANS_END
};
/* 3 Card Enable Array */
struct wl_pwr_cfg rtl8188E_card_enable_flow
[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_CARDDIS_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_ACT
RTL8188E_TRANS_END
};
/* 3Suspend Array */
struct wl_pwr_cfg rtl8188E_suspend_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_ACT_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_SUS
RTL8188E_TRANS_END
};
/* 3 Resume Array */
struct wl_pwr_cfg rtl8188E_resume_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8188E_TRANS_CARDEMU_TO_SUS_STEPS +
RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_SUS_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_ACT
RTL8188E_TRANS_END
};
/* 3HWPDN Array */
struct wl_pwr_cfg rtl8188E_hwpdn_flow[RTL8188E_TRANS_ACT_TO_CARDEMU_STEPS +
RTL8188E_TRANS_CARDEMU_TO_PDN_STEPS +
RTL8188E_TRANS_END_STEPS] = {
RTL8188E_TRANS_ACT_TO_CARDEMU
RTL8188E_TRANS_CARDEMU_TO_PDN
RTL8188E_TRANS_END
};
/* 3 Enter LPS */
struct wl_pwr_cfg rtl8188E_enter_lps_flow[RTL8188E_TRANS_ACT_TO_LPS_STEPS +
RTL8188E_TRANS_END_STEPS] = {
/* FW behavior */
RTL8188E_TRANS_ACT_TO_LPS
RTL8188E_TRANS_END
};
/* 3 Leave LPS */
struct wl_pwr_cfg rtl8188E_leave_lps_flow[RTL8188E_TRANS_LPS_TO_ACT_STEPS +
RTL8188E_TRANS_END_STEPS] = {
/* FW behavior */
RTL8188E_TRANS_LPS_TO_ACT
RTL8188E_TRANS_END
};