file.rst
file
----
File manipulation command.
Synopsis
^^^^^^^^
.. parsed-literal::
`Reading`_
file(`READ`_ <filename> <out-var> [...])
file(`STRINGS`_ <filename> <out-var> [...])
file(`\<HASH\> <HASH_>`_ <filename> <out-var>)
file(`TIMESTAMP`_ <filename> <out-var> [...])
`Writing`_
file({`WRITE`_ | `APPEND`_} <filename> <content>...)
file({`TOUCH`_ | `TOUCH_NOCREATE`_} [<file>...])
file(`GENERATE`_ OUTPUT <output-file> [...])
`Filesystem`_
file({`GLOB`_ | `GLOB_RECURSE`_} <out-var> [...] [<globbing-expr>...])
file(`RENAME`_ <oldname> <newname>)
file({`REMOVE`_ | `REMOVE_RECURSE`_ } [<files>...])
file(`MAKE_DIRECTORY`_ [<dir>...])
file({`COPY`_ | `INSTALL`_} <file>... DESTINATION <dir> [...])
file(`SIZE`_ <filename> <out-var>)
file(`READ_SYMLINK`_ <linkname> <out-var>)
file(`CREATE_LINK`_ <original> <linkname> [...])
`Path Conversion`_
file(`RELATIVE_PATH`_ <out-var> <directory> <file>)
file({`TO_CMAKE_PATH`_ | `TO_NATIVE_PATH`_} <path> <out-var>)
`Transfer`_
file(`DOWNLOAD`_ <url> <file> [...])
file(`UPLOAD`_ <file> <url> [...])
`Locking`_
file(`LOCK`_ <path> [...])
Reading
^^^^^^^
.. _READ:
.. code-block:: cmake
file(READ <filename> <variable>
[OFFSET <offset>] [LIMIT <max-in>] [HEX])
Read content from a file called ``<filename>`` and store it in a
``<variable>``. Optionally start from the given ``<offset>`` and
read at most ``<max-in>`` bytes. The ``HEX`` option causes data to
be converted to a hexadecimal representation (useful for binary data).
.. _STRINGS:
.. code-block:: cmake
file(STRINGS <filename> <variable> [<options>...])
Parse a list of ASCII strings from ``<filename>`` and store it in
``<variable>``. Binary data in the file are ignored. Carriage return
(``\r``, CR) characters are ignored. The options are:
``LENGTH_MAXIMUM <max-len>``
Consider only strings of at most a given length.
``LENGTH_MINIMUM <min-len>``
Consider only strings of at least a given length.
``LIMIT_COUNT <max-num>``
Limit the number of distinct strings to be extracted.
``LIMIT_INPUT <max-in>``
Limit the number of input bytes to read from the file.
``LIMIT_OUTPUT <max-out>``
Limit the number of total bytes to store in the ``<variable>``.
``NEWLINE_CONSUME``
Treat newline characters (``\n``, LF) as part of string content
instead of terminating at them.
``NO_HEX_CONVERSION``
Intel Hex and Motorola S-record files are automatically converted to
binary while reading unless this option is given.
``REGEX <regex>``
Consider only strings that match the given regular expression.
``ENCODING <encoding-type>``
Consider strings of a given encoding. Currently supported encodings are:
UTF-8, UTF-16LE, UTF-16BE, UTF-32LE, UTF-32BE. If the ENCODING option
is not provided and the file has a Byte Order Mark, the ENCODING option
will be defaulted to respect the Byte Order Mark.
For example, the code
.. code-block:: cmake
file(STRINGS myfile.txt myfile)
stores a list in the variable ``myfile`` in which each item is a line
from the input file.
.. _HASH:
.. code-block:: cmake
file(<HASH> <filename> <variable>)
Compute a cryptographic hash of the content of ``<filename>`` and
store it in a ``<variable>``. The supported ``<HASH>`` algorithm names
are those listed by the :ref:`string(\<HASH\>) <Supported Hash Algorithms>`
command.
.. _TIMESTAMP:
.. code-block:: cmake
file(TIMESTAMP <filename> <variable> [<format>] [UTC])
Compute a string representation of the modification time of ``<filename>``
and store it in ``<variable>``. Should the command be unable to obtain a
timestamp variable will be set to the empty string ("").
See the :command:`string(TIMESTAMP)` command for documentation of
the ``<format>`` and ``UTC`` options.
Writing
^^^^^^^
.. _WRITE:
.. _APPEND:
.. code-block:: cmake
file(WRITE <filename> <content>...)
file(APPEND <filename> <content>...)
Write ``<content>`` into a file called ``<filename>``. If the file does
not exist, it will be created. If the file already exists, ``WRITE``
mode will overwrite it and ``APPEND`` mode will append to the end.
Any directories in the path specified by ``<filename>`` that do not
exist will be created.
If the file is a build input, use the :command:`configure_file` command
to update the file only when its content changes.
.. _TOUCH:
.. _TOUCH_NOCREATE:
.. code-block:: cmake
file(TOUCH [<files>...])
file(TOUCH_NOCREATE [<files>...])
Create a file with no content if it does not yet exist. If the file already
exists, its access and/or modification will be updated to the time when the
function call is executed.
Use TOUCH_NOCREATE to touch a file if it exists but not create it. If a file
does not exist it will be silently ignored.
With TOUCH and TOUCH_NOCREATE the contents of an existing file will not be
modified.
.. _GENERATE:
.. code-block:: cmake
file(GENERATE OUTPUT output-file
<INPUT input-file|CONTENT content>
[CONDITION expression])
Generate an output file for each build configuration supported by the current
:manual:`CMake Generator <cmake-generators(7)>`. Evaluate
:manual:`generator expressions <cmake-generator-expressions(7)>`
from the input content to produce the output content. The options are:
``CONDITION <condition>``
Generate the output file for a particular configuration only if
the condition is true. The condition must be either ``0`` or ``1``
after evaluating generator expressions.
``CONTENT <content>``
Use the content given explicitly as input.
``INPUT <input-file>``
Use the content from a given file as input.
A relative path is treated with respect to the value of
:variable:`CMAKE_CURRENT_SOURCE_DIR`. See policy :policy:`CMP0070`.
``OUTPUT <output-file>``
Specify the output file name to generate. Use generator expressions
such as ``$<CONFIG>`` to specify a configuration-specific output file
name. Multiple configurations may generate the same output file only
if the generated content is identical. Otherwise, the ``<output-file>``
must evaluate to an unique name for each configuration.
A relative path (after evaluating generator expressions) is treated
with respect to the value of :variable:`CMAKE_CURRENT_BINARY_DIR`.
See policy :policy:`CMP0070`.
Exactly one ``CONTENT`` or ``INPUT`` option must be given. A specific
``OUTPUT`` file may be named by at most one invocation of ``file(GENERATE)``.
Generated files are modified and their timestamp updated on subsequent cmake
runs only if their content is changed.
Note also that ``file(GENERATE)`` does not create the output file until the
generation phase. The output file will not yet have been written when the
``file(GENERATE)`` command returns, it is written only after processing all
of a project's ``CMakeLists.txt`` files.
Filesystem
^^^^^^^^^^
.. _GLOB:
.. _GLOB_RECURSE:
.. code-block:: cmake
file(GLOB <variable>
[LIST_DIRECTORIES true|false] [RELATIVE <path>] [CONFIGURE_DEPENDS]
[<globbing-expressions>...])
file(GLOB_RECURSE <variable> [FOLLOW_SYMLINKS]
[LIST_DIRECTORIES true|false] [RELATIVE <path>] [CONFIGURE_DEPENDS]
[<globbing-expressions>...])
Generate a list of files that match the ``<globbing-expressions>`` and
store it into the ``<variable>``. Globbing expressions are similar to
regular expressions, but much simpler. If ``RELATIVE`` flag is
specified, the results will be returned as relative paths to the given
path. The results will be ordered lexicographically.
If the ``CONFIGURE_DEPENDS`` flag is specified, CMake will add logic
to the main build system check target to rerun the flagged ``GLOB`` commands
at build time. If any of the outputs change, CMake will regenerate the build
system.
By default ``GLOB`` lists directories - directories are omitted in result if
``LIST_DIRECTORIES`` is set to false.
.. note::
We do not recommend using GLOB to collect a list of source files from
your source tree. If no CMakeLists.txt file changes when a source is
added or removed then the generated build system cannot know when to
ask CMake to regenerate.
The ``CONFIGURE_DEPENDS`` flag may not work reliably on all generators, or if
a new generator is added in the future that cannot support it, projects using
it will be stuck. Even if ``CONFIGURE_DEPENDS`` works reliably, there is
still a cost to perform the check on every rebuild.
Examples of globbing expressions include::
*.cxx - match all files with extension cxx
*.vt? - match all files with extension vta,...,vtz
f[3-5].txt - match files f3.txt, f4.txt, f5.txt
The ``GLOB_RECURSE`` mode will traverse all the subdirectories of the
matched directory and match the files. Subdirectories that are symlinks
are only traversed if ``FOLLOW_SYMLINKS`` is given or policy
:policy:`CMP0009` is not set to ``NEW``.
By default ``GLOB_RECURSE`` omits directories from result list - setting
``LIST_DIRECTORIES`` to true adds directories to result list.
If ``FOLLOW_SYMLINKS`` is given or policy :policy:`CMP0009` is not set to
``OLD`` then ``LIST_DIRECTORIES`` treats symlinks as directories.
Examples of recursive globbing include::
/dir/*.py - match all python files in /dir and subdirectories
.. _RENAME:
.. code-block:: cmake
file(RENAME <oldname> <newname>)
Move a file or directory within a filesystem from ``<oldname>`` to
``<newname>``, replacing the destination atomically.
.. _REMOVE:
.. _REMOVE_RECURSE:
.. code-block:: cmake
file(REMOVE [<files>...])
file(REMOVE_RECURSE [<files>...])
Remove the given files. The ``REMOVE_RECURSE`` mode will remove the given
files and directories, also non-empty directories. No error is emitted if a
given file does not exist. Relative input paths are evaluated with respect
to the current source directory. Empty input paths are ignored with a warning.
.. _MAKE_DIRECTORY:
.. code-block:: cmake
file(MAKE_DIRECTORY [<directories>...])
Create the given directories and their parents as needed.
.. _COPY:
.. _INSTALL:
.. code-block:: cmake
file(<COPY|INSTALL> <files>... DESTINATION <dir>
[FILE_PERMISSIONS <permissions>...]
[DIRECTORY_PERMISSIONS <permissions>...]
[NO_SOURCE_PERMISSIONS] [USE_SOURCE_PERMISSIONS]
[FOLLOW_SYMLINK_CHAIN]
[FILES_MATCHING]
[[PATTERN <pattern> | REGEX <regex>]
[EXCLUDE] [PERMISSIONS <permissions>...]] [...])
The ``COPY`` signature copies files, directories, and symlinks to a
destination folder. Relative input paths are evaluated with respect
to the current source directory, and a relative destination is
evaluated with respect to the current build directory. Copying
preserves input file timestamps, and optimizes out a file if it exists
at the destination with the same timestamp. Copying preserves input
permissions unless explicit permissions or ``NO_SOURCE_PERMISSIONS``
are given (default is ``USE_SOURCE_PERMISSIONS``).
If ``FOLLOW_SYMLINK_CHAIN`` is specified, ``COPY`` will recursively resolve
the symlinks at the paths given until a real file is found, and install
a corresponding symlink in the destination for each symlink encountered. For
each symlink that is installed, the resolution is stripped of the directory,
leaving only the filename, meaning that the new symlink points to a file in
the same directory as the symlink. This feature is useful on some Unix systems,
where libraries are installed as a chain of symlinks with version numbers, with
less specific versions pointing to more specific versions.
``FOLLOW_SYMLINK_CHAIN`` will install all of these symlinks and the library
itself into the destination directory. For example, if you have the following
directory structure:
* ``/opt/foo/lib/libfoo.so.1.2.3``
* ``/opt/foo/lib/libfoo.so.1.2 -> libfoo.so.1.2.3``
* ``/opt/foo/lib/libfoo.so.1 -> libfoo.so.1.2``
* ``/opt/foo/lib/libfoo.so -> libfoo.so.1``
and you do:
.. code-block:: cmake
file(COPY /opt/foo/lib/libfoo.so DESTINATION lib FOLLOW_SYMLINK_CHAIN)
This will install all of the symlinks and ``libfoo.so.1.2.3`` itself into
``lib``.
See the :command:`install(DIRECTORY)` command for documentation of
permissions, ``FILES_MATCHING``, ``PATTERN``, ``REGEX``, and
``EXCLUDE`` options. Copying directories preserves the structure
of their content even if options are used to select a subset of
files.
The ``INSTALL`` signature differs slightly from ``COPY``: it prints
status messages (subject to the :variable:`CMAKE_INSTALL_MESSAGE` variable),
and ``NO_SOURCE_PERMISSIONS`` is default.
Installation scripts generated by the :command:`install` command
use this signature (with some undocumented options for internal use).
.. _SIZE:
.. code-block:: cmake
file(SIZE <filename> <variable>)
Determine the file size of the ``<filename>`` and put the result in
``<variable>`` variable. Requires that ``<filename>`` is a valid path
pointing to a file and is readable.
.. _READ_SYMLINK:
.. code-block:: cmake
file(READ_SYMLINK <linkname> <variable>)
This subcommand queries the symlink ``<linkname>`` and stores the path it
points to in the result ``<variable>``. If ``<linkname>`` does not exist or
is not a symlink, CMake issues a fatal error.
Note that this command returns the raw symlink path and does not resolve
a relative path. The following is an example of how to ensure that an
absolute path is obtained:
.. code-block:: cmake
set(linkname "/path/to/foo.sym")
file(READ_SYMLINK "${linkname}" result)
if(NOT IS_ABSOLUTE "${result}")
get_filename_component(dir "${linkname}" DIRECTORY)
set(result "${dir}/${result}")
endif()
.. _CREATE_LINK:
.. code-block:: cmake
file(CREATE_LINK <original> <linkname>
[RESULT <result>] [COPY_ON_ERROR] [SYMBOLIC])
Create a link ``<linkname>`` that points to ``<original>``.
It will be a hard link by default, but providing the ``SYMBOLIC`` option
results in a symbolic link instead. Hard links require that ``original``
exists and is a file, not a directory. If ``<linkname>`` already exists,
it will be overwritten.
The ``<result>`` variable, if specified, receives the status of the operation.
It is set to ``0`` upon success or an error message otherwise. If ``RESULT``
is not specified and the operation fails, a fatal error is emitted.
Specifying ``COPY_ON_ERROR`` enables copying the file as a fallback if
creating the link fails. It can be useful for handling situations such as
``<original>`` and ``<linkname>`` being on different drives or mount points,
which would make them unable to support a hard link.
Path Conversion
^^^^^^^^^^^^^^^
.. _RELATIVE_PATH:
.. code-block:: cmake
file(RELATIVE_PATH <variable> <directory> <file>)
Compute the relative path from a ``<directory>`` to a ``<file>`` and
store it in the ``<variable>``.
.. _TO_CMAKE_PATH:
.. _TO_NATIVE_PATH:
.. code-block:: cmake
file(TO_CMAKE_PATH "<path>" <variable>)
file(TO_NATIVE_PATH "<path>" <variable>)
The ``TO_CMAKE_PATH`` mode converts a native ``<path>`` into a cmake-style
path with forward-slashes (``/``). The input can be a single path or a
system search path like ``$ENV{PATH}``. A search path will be converted
to a cmake-style list separated by ``;`` characters.
The ``TO_NATIVE_PATH`` mode converts a cmake-style ``<path>`` into a native
path with platform-specific slashes (``\`` on Windows and ``/`` elsewhere).
Always use double quotes around the ``<path>`` to be sure it is treated
as a single argument to this command.
Transfer
^^^^^^^^
.. _DOWNLOAD:
.. _UPLOAD:
.. code-block:: cmake
file(DOWNLOAD <url> <file> [<options>...])
file(UPLOAD <file> <url> [<options>...])
The ``DOWNLOAD`` mode downloads the given ``<url>`` to a local ``<file>``.
The ``UPLOAD`` mode uploads a local ``<file>`` to a given ``<url>``.
Options to both ``DOWNLOAD`` and ``UPLOAD`` are:
``INACTIVITY_TIMEOUT <seconds>``
Terminate the operation after a period of inactivity.
``LOG <variable>``
Store a human-readable log of the operation in a variable.
``SHOW_PROGRESS``
Print progress information as status messages until the operation is
complete.
``STATUS <variable>``
Store the resulting status of the operation in a variable.
The status is a ``;`` separated list of length 2.
The first element is the numeric return value for the operation,
and the second element is a string value for the error.
A ``0`` numeric error means no error in the operation.
``TIMEOUT <seconds>``
Terminate the operation after a given total time has elapsed.
``USERPWD <username>:<password>``
Set username and password for operation.
``HTTPHEADER <HTTP-header>``
HTTP header for operation. Suboption can be repeated several times.
``NETRC <level>``
Specify whether the .netrc file is to be used for operation. If this
option is not specified, the value of the ``CMAKE_NETRC`` variable
will be used instead.
Valid levels are:
``IGNORED``
The .netrc file is ignored.
This is the default.
``OPTIONAL``
The .netrc file is optional, and information in the URL is preferred.
The file will be scanned to find which ever information is not specified
in the URL.
``REQUIRED``
The .netrc file is required, and information in the URL is ignored.
``NETRC_FILE <file>``
Specify an alternative .netrc file to the one in your home directory,
if the ``NETRC`` level is ``OPTIONAL`` or ``REQUIRED``. If this option
is not specified, the value of the ``CMAKE_NETRC_FILE`` variable will
be used instead.
If neither ``NETRC`` option is given CMake will check variables
``CMAKE_NETRC`` and ``CMAKE_NETRC_FILE``, respectively.
Additional options to ``DOWNLOAD`` are:
``EXPECTED_HASH ALGO=<value>``
Verify that the downloaded content hash matches the expected value, where
``ALGO`` is one of the algorithms supported by ``file(<HASH>)``.
If it does not match, the operation fails with an error.
``EXPECTED_MD5 <value>``
Historical short-hand for ``EXPECTED_HASH MD5=<value>``.
``TLS_VERIFY <ON|OFF>``
Specify whether to verify the server certificate for ``https://`` URLs.
The default is to *not* verify.
``TLS_CAINFO <file>``
Specify a custom Certificate Authority file for ``https://`` URLs.
For ``https://`` URLs CMake must be built with OpenSSL support. ``TLS/SSL``
certificates are not checked by default. Set ``TLS_VERIFY`` to ``ON`` to
check certificates and/or use ``EXPECTED_HASH`` to verify downloaded content.
If neither ``TLS`` option is given CMake will check variables
``CMAKE_TLS_VERIFY`` and ``CMAKE_TLS_CAINFO``, respectively.
Locking
^^^^^^^
.. _LOCK:
.. code-block:: cmake
file(LOCK <path> [DIRECTORY] [RELEASE]
[GUARD <FUNCTION|FILE|PROCESS>]
[RESULT_VARIABLE <variable>]
[TIMEOUT <seconds>])
Lock a file specified by ``<path>`` if no ``DIRECTORY`` option present and file
``<path>/cmake.lock`` otherwise. File will be locked for scope defined by
``GUARD`` option (default value is ``PROCESS``). ``RELEASE`` option can be used
to unlock file explicitly. If option ``TIMEOUT`` is not specified CMake will
wait until lock succeed or until fatal error occurs. If ``TIMEOUT`` is set to
``0`` lock will be tried once and result will be reported immediately. If
``TIMEOUT`` is not ``0`` CMake will try to lock file for the period specified
by ``<seconds>`` value. Any errors will be interpreted as fatal if there is no
``RESULT_VARIABLE`` option. Otherwise result will be stored in ``<variable>``
and will be ``0`` on success or error message on failure.
Note that lock is advisory - there is no guarantee that other processes will
respect this lock, i.e. lock synchronize two or more CMake instances sharing
some modifiable resources. Similar logic applied to ``DIRECTORY`` option -
locking parent directory doesn't prevent other ``LOCK`` commands to lock any
child directory or file.
Trying to lock file twice is not allowed. Any intermediate directories and
file itself will be created if they not exist. ``GUARD`` and ``TIMEOUT``
options ignored on ``RELEASE`` operation.