https://bitbucket.org/daniel_fort/magic-lantern
Tip revision: 06b3bb79ef80342b74e8548d07472f8e68a85b0f authored by danne on 02 February 2017, 20:26:43 UTC
blacks out
blacks out
Tip revision: 06b3bb7
ettr.c
/**
* Auto ETTR (Expose To The Right).
*
* Optimize the exposure for raw shooting (photo + video).
*/
#include <module.h>
#include <dryos.h>
#include <property.h>
#include <bmp.h>
#include <menu.h>
#include <config.h>
#include <raw.h>
#include <lens.h>
#include <math.h>
#include <zebra.h>
#include <shoot.h>
#include <fps.h>
#include <focus.h>
#include <beep.h>
#include <histogram.h>
#include <console.h>
/* interface with dual ISO */
#include "../dual_iso/dual_iso.h"
static CONFIG_INT("auto.ettr", auto_ettr, 0);
static CONFIG_INT("auto.ettr.trigger", auto_ettr_trigger, 2);
static CONFIG_INT("auto.ettr.ignore", auto_ettr_ignore, 1);
static CONFIG_INT("auto.ettr.level", auto_ettr_target_level, -1);
static CONFIG_INT("auto.ettr.max.tv", auto_ettr_max_shutter, 88);
static CONFIG_INT("auto.ettr.clip", auto_ettr_clip, 0);
static CONFIG_INT("auto.ettr.mode", auto_ettr_adjust_mode, 0);
static CONFIG_INT("auto.ettr.midtone.snr", auto_ettr_midtone_snr_limit, 6);
static CONFIG_INT("auto.ettr.shadow.snr", auto_ettr_shadow_snr_limit, 2);
static CONFIG_INT("auto.ettr.dual.iso", auto_ettr_dual_iso_link, 1);
static CONFIG_INT("auto.ettr.allow.beeps", auto_ettr_allow_beeps, 1);
static int debug_info = 0;
static int show_metered_areas = 0;
#define AUTO_ETTR_TRIGGER_ALWAYS_ON (auto_ettr_trigger == 0 || is_intervalometer_running())
#define AUTO_ETTR_TRIGGER_AUTO_SNAP (auto_ettr_trigger == 1)
#define AUTO_ETTR_TRIGGER_PHOTO (AUTO_ETTR_TRIGGER_ALWAYS_ON || AUTO_ETTR_TRIGGER_AUTO_SNAP)
#define AUTO_ETTR_TRIGGER_BY_SET (auto_ettr_trigger == 2)
#define AUTO_ETTR_TRIGGER_BY_HALFSHUTTER_DBLCLICK (auto_ettr_trigger == 3)
#define IS_EOS_M (camera_model_id == MODEL_EOS_M)
/* status codes */
#define ETTR_EXPO_PRECOND_TIMEOUT -2
#define ETTR_EXPO_LIMITS_REACHED -1
#define ETTR_NEED_MORE_SHOTS 0
#define ETTR_SETTLED 1
/** Some cameras do not have raw liveview **/
extern WEAK_FUNC(ret_0) void raw_lv_request();
extern WEAK_FUNC(ret_0) void raw_lv_release();
extern WEAK_FUNC(ret_0) int raw_lv_is_enabled();
/* optional beeps */
static void ettr_beep()
{
if (auto_ettr_allow_beeps)
{
beep();
}
}
static void ettr_beep_times(int n)
{
if (auto_ettr_allow_beeps)
{
beep_times(n);
}
}
static int ettr_get_current_long_exposure_time()
{
int seconds = menu_get_value_from_script("Bulb Timer", "Exposure duration");
return seconds;
}
static int ettr_get_current_raw_shutter()
{
if (is_bulb_mode())
{
return shutterf_to_raw(ettr_get_current_long_exposure_time());
}
else
{
return lens_info.raw_shutter;
}
}
static int auto_ettr_get_long_exposure_time(int raw_shutter)
{
/* full-stops will be rounded to minutes, otherwise we get funny times like 91 seconds */
int seconds = (int)roundf(30.0 * powf(2.0, (16.0 - raw_shutter)/8.0));
/* things like 21 or 19 get rounded */
int s = (seconds % 60) % 10;
if (s == 1 || s == 3) {
seconds--;
} else if (s == 7 || s == 9) {
seconds++;
}
return seconds;
}
static const char * ettr_format_shutter(int raw_shutter)
{
if (raw_shutter >= SHUTTER_30s)
{
return lens_format_shutter(raw_shutter);
}
else
{
int seconds = auto_ettr_get_long_exposure_time(raw_shutter);
return format_time_hours_minutes_seconds(seconds);
}
}
static char* get_current_exposure_settings()
{
static char msg[50];
int iso1 = lens_info.iso_analog_raw;
snprintf(msg, sizeof(msg), "ISO %d", raw2iso(iso1));
int iso2 = dual_iso_get_recovery_iso();
if (iso2 && iso2 != iso1)
{
STR_APPEND(msg, "/%d", raw2iso(iso2));
}
if (is_bulb_mode())
{
/* note: using ettr_format_shutter here introduces roundoff errors of a few seconds */
int seconds = ettr_get_current_long_exposure_time();
STR_APPEND(msg, " %s", format_time_hours_minutes_seconds(seconds));
}
else
{
STR_APPEND(msg, " %s", lens_format_shutter(lens_info.raw_shutter));
}
return msg;
}
static int extra_snr_needed = 0;
/* metering on dual ISO images can be affected by black level delta */
/* ideally, ev_hi = ev_lo + ev_delta, so we'll try to find a black level delta that matches this */
/* => solve this: raw_to_ev(raw_value_hi - black_delta) = raw_to_ev(raw_value_lo + black_delta) + ev_delta */
static int guess_black_delta(int raw_value_lo, int raw_value_hi, float ev_delta)
{
float best_err = 100000;
int best_black_delta = 0;
for (int black_delta = -40; black_delta <= 40; black_delta++)
{
float err = ABS(raw_to_ev(raw_value_hi - black_delta) - raw_to_ev(raw_value_lo + black_delta) - ev_delta);
if (err < best_err)
{
best_err = err;
best_black_delta = black_delta;
}
}
return best_black_delta;
}
/* also used for display on histogram */
static int auto_ettr_get_correction()
{
static int last_value = INT_MIN;
/* this is kinda slow, don't run it very often */
static int aux = INT_MIN;
if (!lv && !should_run_polling_action(100, &aux) && last_value != INT_MIN)
return last_value;
int gray_proj =
auto_ettr_clip == 0 ? GRAY_PROJECTION_MAX_RGB :
auto_ettr_clip == 1 ? GRAY_PROJECTION_MAX_RB :
auto_ettr_clip == 2 ? GRAY_PROJECTION_MEDIAN_RGB : -1;
/* compute the raw levels for more percentile values; will help if the image is overexposed */
/* if it's not, we'll use only the first value (the one from menu) */
int percentiles[13] = {(1000 - auto_ettr_ignore), 950, 900, 800, 750, 700, 600, 500, 300, 200, 150, 100, 50};
int raw_values[COUNT(percentiles)];
static float diff_from_lower_percentiles[COUNT(percentiles)-1] = {0};
int speed = 1; /* 1 = examine each LiveView pixel (720x480); 2 = downsample by 2 and so on */
if (lv)
{
/* if highlight ignore is off, we have to look carefully */
/* otherwise, the meter is not that sensitive and can be a little faster */
speed = auto_ettr_ignore ? 4 : 2;
}
int ok = raw_hist_get_percentile_levels(percentiles, raw_values, COUNT(percentiles), gray_proj | GRAY_PROJECTION_DARK_ONLY, speed);
if (ok != 1)
{
last_value = INT_MIN;
return last_value;
}
float ev = raw_to_ev(raw_values[0]);
int raw_median_lo = raw_values[7]; /* 50th percentile (median) */
int raw_shadow_lo = raw_values[12]; /* 5th percentile */
int raw_highlight_lo = raw_values[0]; /* "highlight ignore" percentile */
float ev_median_lo = raw_to_ev(raw_median_lo);
float ev_shadow_lo = raw_to_ev(raw_shadow_lo);
int dual_iso = auto_ettr_dual_iso_link && dual_iso_is_active();
float ev_median_hi = ev_median_lo;
float ev_shadow_hi = ev_shadow_lo; /* for dual ISO: for the bright exposure */
if (dual_iso)
{
/* for dual ISO only:*/
/* we have metered the dark exposure (since ETTR is pushing that to the right), now meter the bright one too */
/* EV difference between the two ISOs (from settings) */
float dual_iso_spacing = ABS(dual_iso_get_recovery_iso() - lens_info.iso_analog_raw) / 8.0;
if (lv && !is_movie_mode())
{
/* photo LV (only one exposure) */
/* estimate it from settings */
int rec_iso = dual_iso_get_recovery_iso();
if (rec_iso > (int)lens_info.iso_analog_raw) /* we are looking at the dark exposure */
{
ev_median_hi = MIN(ev_median_lo + dual_iso_spacing, 0); /* you can't get whiter than white */
ev_shadow_hi = MIN(ev_shadow_lo + dual_iso_spacing, 0);
}
else /* we are looking at the bright exposure */
{
ev_median_hi = ev_median_lo - dual_iso_spacing;
ev_shadow_hi = ev_shadow_lo - dual_iso_spacing;
float aux = ev_median_hi; ev_median_hi = ev_median_lo; ev_median_lo = aux;
aux = ev_shadow_hi; ev_shadow_hi = ev_shadow_lo; ev_shadow_lo = aux;
}
}
else
{
/* photo non-LV and movie */
int percentiles_hi[2] = {500, 50};
int raw_values_hi[2];
raw_hist_get_percentile_levels(percentiles_hi, raw_values_hi, COUNT(percentiles_hi), gray_proj | GRAY_PROJECTION_BRIGHT_ONLY, 4);
int raw_median_hi = raw_values_hi[0]; /* 50th percentile (median) */
int raw_shadow_hi = raw_values_hi[1]; /* 5th percentile */
/* signal level for the higher exposure must be equal to signal level for the lower exposure plus dual ISO spacing (EV) */
/* if it's not, it's very likely to be a large black level difference messing with our formulas */
/* let's try to fight it! */
/* compute it from shadow levels, because this is where black delta has the largest effect */
/* if you compute it from median, shadow may be still wrong by 1-2 EV */
/* if you compute it from shadow, median may be wrong by only 0.1 - 0.2 EV - much better! */
int black_delta = guess_black_delta(raw_shadow_lo, raw_shadow_hi, dual_iso_spacing);
ev_median_lo = raw_to_ev(raw_median_lo + black_delta);
ev_shadow_lo = raw_to_ev(raw_shadow_lo + black_delta);
ev_median_hi = raw_to_ev(raw_median_hi - black_delta);
ev_shadow_hi = raw_to_ev(raw_shadow_hi - black_delta);
if (debug_info)
{
int gap_med = (ev_median_hi - ev_median_lo) * 100;
int gap_shad = (ev_shadow_hi - ev_shadow_lo) * 100;
printf("Black delta : %d (EV gap mid:%s%d.%02d shad:%s%d.%02d)\n", black_delta, FMT_FIXEDPOINT2(gap_med), FMT_FIXEDPOINT2(gap_shad));
}
}
}
if (show_metered_areas)
{
/* show where exactly are those percentiles */
bmp_printf(FONT(FONT_SMALL, COLOR_WHITE, COLOR_BLUE), 0, 20, "Shadows 5%% ");
bmp_printf(FONT(FONT_SMALL, COLOR_WHITE, COLOR_ORANGE), 0, 32, "Midtones 50%% ");
int hp = (1000 - auto_ettr_ignore);
bmp_printf(FONT(FONT_SMALL, COLOR_WHITE, COLOR_RED), 0, 44, "Highlights%3d.%d%%", hp/10, hp%10);
zebra_highlight_raw_advanced(
(struct raw_highlight_info [])
{
{
.raw_level_lo = 0,
.raw_level_hi = raw_shadow_lo,
.color = COLOR_BLUE,
.line_type = ZEBRA_LINE_SIMPLE,
.fill_type = ZEBRA_FILL_DIAG,
.gray_projection = gray_proj | GRAY_PROJECTION_DARK_ONLY,
},
{
.raw_level_lo = raw_median_lo,
.raw_level_hi = raw_median_lo,
.color = COLOR_ORANGE,
.line_type = ZEBRA_LINE_SIMPLE,
.gray_projection = gray_proj | GRAY_PROJECTION_DARK_ONLY,
},
{
.raw_level_lo = raw_highlight_lo,
.raw_level_hi = 16384,
.color = COLOR_RED,
.line_type = ZEBRA_LINE_SIMPLE,
.fill_type = ZEBRA_FILL_DIAG,
.gray_projection = gray_proj | GRAY_PROJECTION_DARK_ONLY,
},
RAW_HIGHLIGHT_END
}
);
}
//~ bmp_printf(FONT_MED, 50, 200, "%d ", MEMX(0xc0f08030));
float target = MIN(auto_ettr_target_level, -0.5);
float correction = target - ev;
float overexposed_percentage = 0;
if (ev < -0.1)
{
/* cool, we know exactly how much to correct, we'll return "correction" */
/* save data for helping with future overexposed shots */
for (int k = 0; k < COUNT(percentiles)-1; k++)
diff_from_lower_percentiles[k] = ev - raw_to_ev(raw_values[k+1]);
if (debug_info) printf("overexposure hints: %d %d %d\n", (int)(diff_from_lower_percentiles[0] * 100), (int)(diff_from_lower_percentiles[1] * 100), (int)(diff_from_lower_percentiles[2] * 100));
}
else
{
/* image is overexposed */
/* and we don't know how much to go back in order to fix the overexposure */
/* we can find out how many pixels are clipped, but this doesn't help much in knowing how many stops we should go back */
overexposed_percentage = raw_hist_get_overexposure_percentage(GRAY_PROJECTION_AVERAGE_RGB | GRAY_PROJECTION_DARK_ONLY) / 100.0;
if (debug_info) printf("overexposure area: %s%d.%d%%\n", FMT_FIXEDPOINT2((int)(overexposed_percentage * 100)));
/* from the previous shot, we know where the highlights were, compared to some lower percentiles */
/* let's assume this didn't change; meter at those percentiles and extrapolate the result */
int num = 0;
float sum = 0;
float min = 100000;
float max = -100000;
for (int k = 0; k < COUNT(percentiles)-1; k++)
{
if (diff_from_lower_percentiles[k] > 0)
{
float lower_ev = raw_to_ev(raw_values[k+1]);
if (lower_ev < -0.1)
{
/* if the scene didn't change, we should be spot on */
/* don't update the correction hints, since we don't know exactly where we are */
ev = lower_ev + diff_from_lower_percentiles[k];
/* we need to get a stronger correction than with the overexposed metering */
/* otherwise, the scene probably changed */
if (target - ev < correction)
{
float corr = target - ev;
min = MIN(min, corr);
max = MAX(max, corr);
/* first estimations are more reliable, weight them a bit more */
sum += corr * (COUNT(percentiles) - k);
num += (COUNT(percentiles) - k);
//~ msleep(500);
printf("overexposure fix: k=%d diff=%d ev=%d corr=%d\n", k, (int)(diff_from_lower_percentiles[k] * 100), (int)(ev * 100), (int)(corr * 100));
}
}
}
}
/* use the average value for correction */
correction = sum / num;
if (num < 3 || max - correction > 1 || correction - min > 1 || correction > -1)
{
/* scene changed? measurements from previous shot not confirmed or vary too much?
*
* we'll use a heuristic: for 1% of blown out image, go back 1EV, for 100% go back 13EV */
printf("fail info: (%d %d %d %d) (%d %d %d)\n", raw_values[0], raw_values[1], raw_values[2], raw_values[3], (int)(diff_from_lower_percentiles[0] * 100), (int)(diff_from_lower_percentiles[1] * 100), (int)(diff_from_lower_percentiles[2] * 100));
float corr = - log2f(1 + overexposed_percentage*overexposed_percentage);
/* with dual ISO, the cost of underexposing is not that high, so prefer it to improve convergence */
if (dual_iso)
corr *= 3;
correction = MIN(correction, corr);
/* we can't really meter more than 10 EV */
correction = MAX(correction, -10);
}
}
int iso1 = lens_info.iso_analog_raw;
int iso2 = iso1;
if (dual_iso) iso2 = dual_iso_get_recovery_iso();
int iso_hi = MAX(iso1, iso2);
int iso_lo = MIN(iso1, iso2);
float dr_lo = get_dxo_dynamic_range(iso_lo) / 100.0;
float dr_hi = get_dxo_dynamic_range(iso_hi) / 100.0;
if (debug_info)
{
if (dual_iso)
{
float midtone_snr_lo = dr_lo + ev_median_lo;
float shadow_snr_lo = dr_lo + ev_shadow_lo;
int mid_snr_lo = (int)roundf(midtone_snr_lo * 10);
int shad_snr_lo = (int)roundf(shadow_snr_lo * 10);
float midtone_snr_hi = dr_hi + ev_median_hi;
float shadow_snr_hi = dr_hi + ev_shadow_hi;
int mid_snr_hi = (int)roundf(midtone_snr_hi * 10);
int shad_snr_hi = (int)roundf(shadow_snr_hi * 10);
printf("Midtone SNR : %s%d.%d / %s%d.%d EV\n", FMT_FIXEDPOINT1(mid_snr_lo), FMT_FIXEDPOINT1(mid_snr_hi));
printf("Shadows SNR : %s%d.%d / %s%d.%d EV\n", FMT_FIXEDPOINT1(shad_snr_lo), FMT_FIXEDPOINT1(shad_snr_hi));
}
else
{
float midtone_snr = dr_lo + ev_median_lo;
float shadow_snr = dr_lo + ev_shadow_lo;
int mid_snr = (int)roundf(midtone_snr * 10);
int shad_snr = (int)roundf(shadow_snr * 10);
printf("Midtone SNR : %s%d.%d EV\n", FMT_FIXEDPOINT1(mid_snr));
printf("Shadows SNR : %s%d.%d EV\n", FMT_FIXEDPOINT1(shad_snr));
}
int clipped = raw_hist_get_overexposure_percentage(GRAY_PROJECTION_AVERAGE_RGB | GRAY_PROJECTION_DARK_ONLY);
printf("Clipped highs: %s%d.%02d%%\n", FMT_FIXEDPOINT2(clipped));
}
if (overexposed_percentage > 0 && (auto_ettr_midtone_snr_limit || auto_ettr_shadow_snr_limit) && !dual_iso)
{
/* if the image is overexposed and we have SNR limits, we could meter for those instead */
/* don't underexpose by more than 2 EV in one step though */
correction -= 2;
}
/* are we underexposing too much? */
float correction0 = correction;
if (lens_info.raw_iso && (auto_ettr_midtone_snr_limit || auto_ettr_shadow_snr_limit))
{
float midtone_snr = dr_lo + ev_median_lo;
float shadow_snr = dr_lo + ev_shadow_lo;
if (auto_ettr_midtone_snr_limit)
{
float midtone_expected_snr = midtone_snr + correction0;
int midtone_desired_snr = auto_ettr_midtone_snr_limit;
if (midtone_expected_snr < midtone_desired_snr)
{
correction = MAX(correction, correction0 + midtone_desired_snr - midtone_expected_snr);
}
}
if (auto_ettr_shadow_snr_limit)
{
float shadow_expected_snr = shadow_snr + correction0;
int shadow_desired_snr = auto_ettr_shadow_snr_limit;
if (shadow_expected_snr < shadow_desired_snr)
{
correction = MAX(correction, correction0 + shadow_desired_snr - shadow_expected_snr);
}
}
}
/* exposure difference with and without SNR limits */
int expo_delta_snr = (correction - correction0) * 100.0;
if (debug_info)
{
int expo_hi = correction0 * 100.0;
int expo_snr = correction * 100.0;
printf("Expo highlight: %s%d.%02d EV\n", FMT_FIXEDPOINT2S(expo_hi));
printf("Expo SNR limit: %s%d.%02d EV\n", FMT_FIXEDPOINT2S(expo_snr));
printf("Expo delta SNR: %s%d.%02d EV\n", FMT_FIXEDPOINT2S(expo_delta_snr));
}
/* exposure correction so it doesn't clip anything more than allowed by highlight ignore */
int corr_without_clipping = (int)(correction * 100) - expo_delta_snr;
if (dual_iso)
{
/* with dual ISO: expose without clipping */
/* auto_ettr_work will have to do something and recover the SNR */
last_value = corr_without_clipping;
extra_snr_needed = expo_delta_snr;
}
else
{
/* without dual ISO: expose with clipping in order to meet the SNR */
/* no more SNR correction needed */
last_value = corr_without_clipping + expo_delta_snr;
extra_snr_needed = 0;
}
if (debug_info)
{
printf("Expo correction: %s%d.%02d EV\n", FMT_FIXEDPOINT2S(last_value));
}
return last_value;
}
int auto_ettr_export_correction(int* out)
{
int value = auto_ettr_get_correction();
if (value == INT_MIN) return -1;
if (out) *out = value;
return 1;
}
static char prev_exposure_settings[50];
/* returns: 0 = nothing changed, 1 = OK, -1 = exposure limits reached */
static int auto_ettr_work(int corr)
{
if (debug_info) printf("\nauto_ettr_work(%d)\n", corr);
/* wait until shutter speed is reported by Canon firmware */
int iter = 0;
while (lens_info.raw_shutter == 0)
{
if (iter > 100)
{
return ETTR_EXPO_PRECOND_TIMEOUT;
}
msleep(50);
iter += 50;
}
/* save initial exposure settings so we can print them */
char* expo_settings = get_current_exposure_settings();
snprintf(prev_exposure_settings, sizeof(prev_exposure_settings), "%s", expo_settings);
int tv = ettr_get_current_raw_shutter();
int iso = lens_info.raw_iso;
/* to detect whether it settled or not */
int tv_before = tv;
int iso_before = iso;
int iso2_before = dual_iso_get_recovery_iso();
if (!tv || !iso) return 0;
//~ int old_expo = tv - iso;
/* note: expo compensation will not clip with dual ISO, but will clip highlights without it */
int dual_iso = auto_ettr_dual_iso_link && dual_iso_is_active();
int delta = -corr * 8 / 100;
int expected_expo = tv - iso + delta; /* will clip without dual ISO */
static int prev_tv = 0;
if (auto_ettr_adjust_mode == 1)
{
if (prev_tv != tv)
{
auto_ettr_max_shutter = tv;
if (lv)
{
NotifyBox(2000, "ETTR: Tv <= %s ", lens_format_shutter(tv));
prev_tv = tv;
return 0; /* wait for next iteration */
}
else
{
msleep(1000);
bmp_printf(FONT_MED, 0, os.y0, "ETTR: Tv <= %s ", lens_format_shutter(tv));
}
}
}
else
{
if (lv && prev_tv != tv && AUTO_ETTR_TRIGGER_ALWAYS_ON)
{
prev_tv = tv;
return 0; /* small pause when you change exposure manually */
}
}
int shutter_lim = auto_ettr_max_shutter;
/* if intervalometer is enabled, limit longest exposures
* to interval time minus 2 seconds */
if (is_intervalometer_running())
{
int intervalometer_lim = MAX(200, 1000 * (get_interval_time() - 2));
shutter_lim = MAX(shutter_lim, shutter_ms_to_raw(intervalometer_lim));
}
/* can't go slower than 1/fps in movie mode */
if (is_movie_mode())
{
shutter_lim = MAX(shutter_lim, shutter_ms_to_raw(1000 / video_mode_fps));
if (!expo_override_active())
{
/* without expo override, in movie mode we can't set exposures longer than 1/30 */
shutter_lim = MAX(shutter_lim, SHUTTER_1_30);
}
}
/* apply exposure correction */
tv += delta;
if (debug_info) printf("expo after comp: %d\n", tv - iso);
/* use the lowest ISO for which we can get shutter = shutter_lim or higher */
int offset = MIN(tv - shutter_lim, iso - MIN_ISO);
tv -= offset;
iso -= offset;
/* some shutter values are not accepted by Canon firmware */
int tvr = (MIN(tv, shutter_lim) >= SHUTTER_30s)
? round_shutter(tv, shutter_lim)
: MAX(tv, shutter_lim);
iso += tvr - tv;
if (debug_info) printf("tv rounding: %d -> %d limit=%d\n", tv, tvr, shutter_lim);
/* analog iso can be only in 1 EV increments */
/* prefer rounding towards lower ISOs */
int max_auto_iso = auto_iso_range & 0xFF;
int isor = COERCE(iso / 8 * 8, MIN_ISO, max_auto_iso);
if (debug_info) printf("iso rounding: %d -> %d (expo %d -> %d)\n", iso, isor, tvr - iso, tvr - isor);
/* can we use dual ISO to recover the highlights? (HR = highlight recovery) */
if (dual_iso)
{
int base_iso = isor;
int recovery_iso = base_iso;
/* bring back the SNR */
int snr_delta = -extra_snr_needed;
while (snr_delta < 0 && recovery_iso < max_auto_iso)
{
int old_rec_iso = recovery_iso;
recovery_iso += 8;
int dr_gained = dual_iso_calc_dr_improvement(old_rec_iso, recovery_iso);
snr_delta += dr_gained;
}
if (snr_delta + extra_snr_needed < 100) /* snr_delta + extra_snr_needed = SUM(dr_gained) */
{
/* too little gain? just shoot at base ISO */
recovery_iso = base_iso;
snr_delta = -extra_snr_needed;
}
else if (base_iso > MIN_ISO)
{
/* shooting at high ISO? go back one stop to protect some more highlights, because the cost is next to none */
base_iso -= 8;
expected_expo += 8;
}
/* apply dual ISO settings */
isor = base_iso;
dual_iso_set_recovery_iso(recovery_iso);
extra_snr_needed = -snr_delta;
}
/* apply the new settings */
int oki = 0, oks = 0;
if (tvr < SHUTTER_30s)
{
/* use BULB for long exposures */
ensure_bulb_mode();
int seconds = auto_ettr_get_long_exposure_time(tvr);
if (is_intervalometer_running())
{
/* in BULB mode, limit longest exposures to interval time minus 3 seconds */
int intervalometer_lim = MAX(1, get_interval_time() - 3);
seconds = MIN(seconds, intervalometer_lim);
}
/* configure bulb timer with the new exposure */
menu_set_value_from_script("Bulb Timer", "Exposure duration", seconds);
oks = 1;
/* set ISO */
oki = hdr_set_rawiso(isor);
}
else
{
if (is_bulb_mode())
{
/* back from BULB */
set_shooting_mode(SHOOTMODE_M);
}
oki = lens_set_rawiso(isor); /* for expo overide */
oks = lens_set_rawshutter(tvr);
if (!expo_override_active())
{
oks = hdr_set_rawshutter(tvr); /* for confirmation and retrying if needed */
oki = hdr_set_rawiso(isor);
}
}
/* don't let expo lock undo our changes */
expo_lock_update_value();
if (debug_info)
{
printf("Adjusted expo: %s (SNR lost: %s%d.%02d)\n", get_current_exposure_settings(), FMT_FIXEDPOINT2(extra_snr_needed));
}
/* to know when the user changed shutter speed */
prev_tv = ettr_get_current_raw_shutter();
/* did it converge or not? */
int tv_after = prev_tv;
int iso_after = lens_info.raw_iso;
int new_expo = tv_after - iso_after;
if (dual_iso)
{
int iso2_after = dual_iso_get_recovery_iso();
int dr2_before = dual_iso_calc_dr_improvement(iso_before, iso2_before);
int dr2_after = dual_iso_calc_dr_improvement(iso_after, iso2_after);
if (debug_info)
{
printf(
"iso2 %d->%d dr %d->%d\n",
raw2iso(iso2_before), raw2iso(iso2_after), dr2_before, dr2_after
);
}
if (ABS(dr2_after - dr2_before) >= 40)
return ETTR_NEED_MORE_SHOTS;
//~ if (highlight_headroom_needed > 50)
//~ return ETTR_EXPO_LIMITS_REACHED;
}
if (debug_info)
{
printf(
"iso %d->%d %s\ntv %d->%d %s\nexpo expected %d got %d\n",
raw2iso(iso_before), raw2iso(iso_after), oki ? "OK" : "err",
tv_before, tv_after, oks ? "OK" : "err",
expected_expo, new_expo
);
}
/* anything changed? consider it OK, better than nothing */
if (ABS(tv_before - tv_after) >= 4)
return ETTR_NEED_MORE_SHOTS;
if (ABS(iso_before - iso_after) >= 4)
return ETTR_NEED_MORE_SHOTS;
/* did we fully correct the exposure? */
if (ABS(new_expo - expected_expo) > 8)
return ETTR_EXPO_LIMITS_REACHED;
return oks && oki ? ETTR_SETTLED : ETTR_EXPO_LIMITS_REACHED;
}
static volatile int auto_ettr_running = 0;
static volatile int ettr_pics_took = 0;
static void auto_ettr_step_task(int corr)
{
lens_wait_readytotakepic(64);
int status = auto_ettr_work(corr);
if (status == ETTR_SETTLED)
{
/* cool, we got the ideal exposure */
ettr_beep();
ettr_pics_took = 0;
msleep(1000);
bmp_printf(FONT_MED, 0, os.y0, "ETTR: settled at %s", get_current_exposure_settings());
//~ int blown_highlights = (highlight_headroom_needed - highlight_headroom_recovered) / 10;
//~ if (blown_highlights > 2)
//~ {
//~ msleep(1000);
//~ bmp_printf(FONT_MED, 0, os.y0, "ETTR: clipped %s%d.%d EV of highlights", FMT_FIXEDPOINT1(blown_highlights));
//~ }
}
else if (ettr_pics_took >= 3)
{
/* I give up */
ettr_beep_times(3);
ettr_pics_took = 0;
msleep(1000);
bmp_printf(FONT_MED, 0, os.y0, "ETTR: giving up\n%s", get_current_exposure_settings());
}
else if (status == ETTR_EXPO_LIMITS_REACHED)
{
ettr_beep_times(3);
ettr_pics_took = 0;
msleep(1000);
bmp_printf(FONT_MED, 0, os.y0, "ETTR: expo limits reached\n%s", get_current_exposure_settings());
}
else if (status == ETTR_EXPO_PRECOND_TIMEOUT)
{
ettr_beep_times(3);
ettr_pics_took = 0;
msleep(1000);
bmp_printf(FONT_MED, 0, os.y0, "ETTR: timeout while waiting for preconditions\n");
}
else if (AUTO_ETTR_TRIGGER_AUTO_SNAP)
{
/* take another pic */
auto_ettr_running = 0;
schedule_remote_shot();
ettr_pics_took++;
}
else if (AUTO_ETTR_TRIGGER_ALWAYS_ON)
{
ettr_beep_times(2);
msleep(1000);
bmp_printf(FONT_MED, 0, os.y0, "ETTR: next %s (was %s)", get_current_exposure_settings(), prev_exposure_settings);
//~ int blown_highlights = (highlight_headroom_needed - highlight_headroom_recovered) / 10;
//~ if (blown_highlights > 2)
//~ {
//~ bmp_printf(FONT_MED, 0, os.y0+20, "Clipped %s%d.%d EV of highlights", FMT_FIXEDPOINT1(blown_highlights));
//~ }
}
auto_ettr_running = 0;
}
/* photo mode only, no LV */
static void auto_ettr_step()
{
if (!auto_ettr) return;
if (shooting_mode != SHOOTMODE_M && !is_movie_mode() && !is_bulb_mode()) return;
if (lens_info.raw_iso == 0) return;
if (auto_ettr_running) return;
if (is_hdr_bracketing_enabled() && !AUTO_ETTR_TRIGGER_BY_SET) return;
if (!raw_update_params())
{
NotifyBox(5000, "Raw error");
return;
}
int corr = auto_ettr_get_correction();
if (corr != INT_MIN)
{
/* we'd better not change expo settings from prop task (we won't get correct confirmations) */
auto_ettr_running = 1;
task_create("ettr_task", 0x1c, 0x1000, auto_ettr_step_task, (void*) corr);
}
}
static int auto_ettr_check_pre_lv()
{
if (!auto_ettr) return 0;
if (shooting_mode != SHOOTMODE_M && !is_movie_mode()) return 0;
if (lens_info.raw_iso == 0) return 0;
if (lens_info.raw_shutter == 0) return 0;
if (is_hdr_bracketing_enabled() && !AUTO_ETTR_TRIGGER_BY_SET) return 0;
int raw = is_movie_mode() ? raw_lv_is_enabled() : pic_quality & 0x60000;
return raw;
}
static int auto_ettr_check_in_lv()
{
if (AUTO_ETTR_TRIGGER_ALWAYS_ON && !get_expsim()) return 0;
if (AUTO_ETTR_TRIGGER_ALWAYS_ON && lv_dispsize != 1) return 0;
if (LV_PAUSED) return 0;
if (!liveview_display_idle()) return 0;
return 1;
}
static int auto_ettr_check_lv()
{
if (!auto_ettr_check_pre_lv()) return 0;
if (!auto_ettr_check_in_lv()) return 0;
return 1;
}
static volatile int auto_ettr_vsync_active = 0;
static volatile int auto_ettr_vsync_delta = 0;
static volatile int auto_ettr_vsync_counter = 0;
/* instead of changing settings via properties, we can override them very quickly */
static unsigned int auto_ettr_vsync_cbr(unsigned int ctx)
{
auto_ettr_vsync_counter++;
if (auto_ettr_vsync_active)
{
int delta = auto_ettr_vsync_delta;
int current_iso = get_frame_iso();
int current_shutter = get_frame_shutter_timer();
int altered_iso = current_iso;
int altered_shutter = current_shutter;
int max_shutter = get_max_shutter_timer();
if (current_shutter > max_shutter) max_shutter = current_shutter;
/* first increase shutter speed, since it gives the cleanest signal */
while (delta > 0 && altered_shutter * 2 <= max_shutter)
{
altered_shutter *= 2;
delta -= 8;
}
int max_iso = get_max_analog_iso();
/* then try to increase ISO if we need more */
while (delta > 0 && altered_iso + 8 <= max_iso)
{
altered_iso += 8;
delta -= 8;
}
/* then try to decrease ISO until ISO 100, raw 72 (even with HTP, FRAME_ISO goes to 100) */
while (delta < -8 && altered_iso - 8 >= 72)
{
altered_iso -= 8;
delta += 8;
}
/* commit iso */
set_frame_iso(altered_iso);
/* adjust shutter with the remaining delta */
altered_shutter = COERCE((int)roundf(powf(2, delta/8.0) * (float)altered_shutter), 2, max_shutter);
/* commit shutter */
set_frame_shutter_timer(altered_shutter);
//~ bmp_printf(FONT_MED, 50, 70, "delta %d iso %d->%d shutter %d->%d max %d ", auto_ettr_vsync_delta, current_iso, altered_iso, current_shutter, altered_shutter, get_max_shutter_timer());
return 1;
}
return 0;
}
static int auto_ettr_wait_lv_frames(int num_frames)
{
auto_ettr_vsync_counter = 0;
int count = 0;
int frame_duration = 1000000 / fps_get_current_x1000();
while (auto_ettr_vsync_counter < num_frames)
{
frame_duration = MAX(frame_duration, 1000000 / fps_get_current_x1000());
msleep(20);
count++;
if (count > num_frames * frame_duration * 2 / 20)
{
/* timeout */
if (debug_info) printf("wait_lv_frames: timeout\n");
return 0;
}
if (!lv)
{
/* outside lv */
if (debug_info) printf("wait_lv_frames: LV closed\n");
return 0;
}
}
return 1;
}
/* wait until LiveView exposure changes from the old values to something else (with timeout on number of frames) */
static int auto_ettr_wait_lv_expo_change(int max_frames, int old_iso, int old_shutter)
{
/* todo: also look at aperture changes */
for (int i = 0; i < max_frames; i++)
{
int current_iso = get_frame_iso();
int current_shutter = get_frame_shutter_timer();
if (debug_info) printf("wait lv expo change: %x %x\n", current_iso, current_shutter);
if (current_iso != old_iso || current_shutter != old_shutter)
{
if (debug_info) printf("exposure changed to: %x %x\n", current_iso, current_shutter);
/* exposure changed */
return 1;
}
if (!auto_ettr_wait_lv_frames(1))
{
/* whoops */
return 0;
}
}
/* timeout */
if (debug_info) printf("lv expo change timeout\n");
return 0;
}
/* wait until LiveView exposure settles (identical on two consecutive frames) */
static int auto_ettr_wait_lv_expo_settle(int max_frames)
{
/* todo: also look at aperture changes */
int old_iso = -1;
int old_shutter = -1;
for (int i = 0; i < max_frames; i++)
{
int current_iso = get_frame_iso();
int current_shutter = get_frame_shutter_timer();
if (debug_info) printf("wait lv expo settle: %x %x\n", current_iso, current_shutter);
if (current_iso == old_iso && current_shutter == old_shutter)
{
/* looks like it settled */
if (debug_info) printf("lv expo maybe settled at: %x %x\n", current_iso, current_shutter);
/* wait one more frame, just in case */
if (auto_ettr_wait_lv_frames(2) == 0)
{
return 0;
}
current_iso = get_frame_iso();
current_shutter = get_frame_shutter_timer();
if (current_iso == old_iso && current_shutter == old_shutter)
{
if (debug_info) printf("lv expo settled at: %x %x\n", current_iso, current_shutter);
/* looks like it did settle */
return 1;
}
}
if (!auto_ettr_wait_lv_frames(1))
{
/* whoops */
return 0;
}
old_iso = current_iso;
old_shutter = current_shutter;
}
/* timeout */
if (debug_info) printf("lv expo settle timeout\n");
return 0;
}
static int auto_ettr_prepare_lv(int reset, int force_expsim_and_zoom)
{
static int was_in_lv = 1;
static int old_expsim = -1;
static int old_zoom = -1;
static int should_clear_bv = 0;
if (!reset)
{
was_in_lv = lv;
old_expsim = -1;
if (!lv) force_liveview();
if (!lv) return 0; /* fail */
/* force 1x zoom */
if (force_expsim_and_zoom && lv_dispsize != 1)
{
old_zoom = lv_dispsize;
set_lv_zoom(1);
if (!auto_ettr_wait_lv_frames(10)) return 0;
}
/* temporarily enable get_expsim() while metering */
if (force_expsim_and_zoom)
{
if (shooting_mode == SHOOTMODE_M && !lens_info.name[0])
{
/* workaround for Canon's manual lens underexposure bug */
/* use expo override instead of ExpSim */
extern int bv_auto;
if (!bv_auto)
{
should_clear_bv = 1;
bv_toggle(0, 1);
if (!auto_ettr_wait_lv_frames(10)) return 0;
}
}
else if (!get_expsim())
{
/* ExpSim should work well */
old_expsim = get_expsim();
set_expsim(1);
if (!auto_ettr_wait_lv_frames(10)) return 0;
}
}
}
else /* undo all that stuff */
{
if (should_clear_bv)
{
extern int bv_auto;
if (bv_auto)
{
bv_toggle(0, -1);
auto_ettr_wait_lv_frames(5);
}
should_clear_bv = 0;
}
if (old_expsim >= 0)
{
set_expsim(old_expsim);
old_expsim = -1;
}
if (old_zoom > 0)
{
set_lv_zoom(old_zoom);
old_zoom = -1;
}
if (lv && !was_in_lv)
{
msleep(200);
close_liveview();
was_in_lv = 1;
}
}
return 1; /* ok */
}
static void auto_ettr_on_request_task_fast()
{
ettr_beep();
int raw_requested = 0;
char* err_msg = "ETTR failed";
/* requires LiveView and ExpSim */
if (!auto_ettr_prepare_lv(0, 1)) goto err;
if (!auto_ettr_check_lv()) goto err;
if (get_halfshutter_pressed())
{
msleep(500);
if (get_halfshutter_pressed()) goto err;
}
#undef AUTO_ETTR_DEBUG
#ifdef AUTO_ETTR_DEBUG
auto_ettr_vsync_active = 1;
int raw0 = raw_hist_get_percentile_level(500, GRAY_PROJECTION_GREEN, 2);
float ev0 = raw_to_ev(raw0);
int y0 = 100 - ev0 * 20;
for (int i = 0; i < 100; i++)
{
int delta = rand() % 160 - 80;
auto_ettr_vsync_delta = delta;
if (!auto_ettr_wait_lv_frames(2)) break;
int raw = raw_hist_get_percentile_level(500, GRAY_PROJECTION_GREEN, 2);
float ev = raw_to_ev(raw);
int x = 360 + delta * 3;
int y = 100 - ev * 24; /* multiplier must be 8 x the one from delta */
dot(x-16, y-16, COLOR_BLUE, 3);
draw_angled_line(360, y0, 300, 1800-450, COLOR_RED);
draw_angled_line(360, y0, 300, -450, COLOR_RED);
draw_angled_line(0, 100, 720, 0, COLOR_RED);
}
auto_ettr_vsync_delta = 0;
auto_ettr_wait_lv_frames(100);
#endif
NotifyBox(100000, "ETTR...");
raw_lv_request(); raw_requested = 1;
if (!raw_update_params())
{
err_msg = "Raw error";
goto err;
}
for (int i = 0; i < 5; i++)
{
NotifyBox(100000, "ETTR (%d)...", i+1);
/* make sure the LiveView exposure is settled before reading */
if (!auto_ettr_wait_lv_expo_settle(30)) break;
if (fps_get_shutter_speed_shift(160) == 0)
{
auto_ettr_vsync_active = 1;
auto_ettr_vsync_delta = 0;
for (int k = 0; k < 5; k++)
{
if (debug_info) printf("ETTR (%d.%d)\n", i+1, k+1);
/* see how far we are from the ideal exposure */
int corr = auto_ettr_get_correction();
if (corr == INT_MIN) break;
/* override the liveview parameters via auto_ettr_vsync_cbr (much faster than via properties) */
auto_ettr_vsync_delta += corr * 8 / 100;
/* I'm confident the last iteration was accurate */
if (corr >= -20 && corr <= 200)
break;
/* wait for 2 frames before trying again */
if (!auto_ettr_wait_lv_frames(2)) goto err;
}
auto_ettr_vsync_active = 0;
}
else /* FPS override is messing up our plans? fall back to the slow method */
{
int corr = auto_ettr_get_correction();
if (corr == INT_MIN) break;
auto_ettr_vsync_delta = corr * 8 / 100;
}
/* apply the correction via properties */
int corr = auto_ettr_vsync_delta * 100 / 8;
int old_iso = get_frame_iso();
int old_shutter = get_frame_shutter_timer();
int status = auto_ettr_work(corr);
if (status == ETTR_SETTLED)
{
/* looks like it settled */
break;
}
else
{
if (i < 4 && status != ETTR_EXPO_LIMITS_REACHED)
{
/* here we go again... */
if (!auto_ettr_wait_lv_expo_change(30, old_iso, old_shutter)) goto err;
}
else
{
/* or... not? */
err_msg = status == ETTR_EXPO_LIMITS_REACHED ? "Expo limits reached" : "Whoops";
goto err;
}
}
}
/* ok: */
ettr_beep();
NotifyBoxHide();
goto cleanup;
err:
ettr_beep();
ettr_beep();
NotifyBox(2000, err_msg);
goto cleanup;
cleanup:
auto_ettr_running = 0;
auto_ettr_vsync_active = 0;
if (raw_requested) raw_lv_release();
auto_ettr_prepare_lv(1, 1);
}
static void auto_ettr_step_lv_fast()
{
if (!auto_ettr || !AUTO_ETTR_TRIGGER_ALWAYS_ON)
return;
if (!auto_ettr_prepare_lv(0, 0))
goto end;
if (!auto_ettr_check_lv())
goto end;
if (get_halfshutter_pressed())
goto end;
/* only poll exposure once per second */
static int aux = INT_MIN;
if (!should_run_polling_action(1000, &aux))
goto end;
raw_lv_request();
if (!raw_update_params())
{
NotifyBox(5000, "Raw error");
goto skip;
}
/* make sure the LiveView exposure is settled before reading */
if (!auto_ettr_wait_lv_expo_settle(30)) goto skip;
/* get exposure correction */
int corr = auto_ettr_get_correction();
/* only correct if the image is overexposed by more than 0.2 EV or underexposed by more than 1 EV */
if (corr != INT_MIN && (corr < -20 || corr > 100))
{
if (fps_get_shutter_speed_shift(160) == 0)
{
auto_ettr_vsync_active = 1;
auto_ettr_vsync_delta = 0;
int k;
for (k = 0; k < 5; k++)
{
/* see how far we are from the ideal exposure */
if (k > 0) corr = auto_ettr_get_correction();
if (corr == INT_MIN) break;
/* override the liveview parameters via auto_ettr_vsync_cbr (much faster than via properties) */
auto_ettr_vsync_delta += corr * 8 / 100;
/* I'm confident the last iteration was accurate */
if (corr >= -20 && corr <= 200)
break;
/* wait for 3 frames before trying again */
if (!auto_ettr_wait_lv_frames(2)) break;
}
auto_ettr_vsync_active = 0;
}
else /* FPS override is messing up our plans? fall back to the slow method */
{
auto_ettr_vsync_delta = corr * 8 / 100;
}
/* apply the final correction via properties */
int old_iso = get_frame_iso();
int old_shutter = get_frame_shutter_timer();
auto_ettr_work(auto_ettr_vsync_delta * 100 / 8);
auto_ettr_wait_lv_expo_change(30, old_iso, old_shutter);
}
skip:
raw_lv_release();
end:
auto_ettr_prepare_lv(1, 0);
}
static void auto_ettr_on_request_task_slow()
{
ettr_beep();
char* err_msg = "ETTR failed";
/* requires LiveView and ExpSim */
if (!auto_ettr_prepare_lv(0, 1)) goto err;
if (!auto_ettr_check_lv()) goto err;
if (get_halfshutter_pressed())
{
msleep(500);
if (get_halfshutter_pressed()) goto err;
}
NotifyBox(100000, "ETTR...");
for (int k = 0; k < 5; k++)
{
msleep(500);
raw_lv_request();
if (!raw_update_params())
{
err_msg = "Raw error";
goto err;
}
int corr = auto_ettr_get_correction();
raw_lv_release();
if (corr == INT_MIN)
break;
int status = auto_ettr_work(corr);
msleep(1000);
if (status == ETTR_SETTLED)
break;
if (k == 4 || status == ETTR_EXPO_LIMITS_REACHED)
{
err_msg = status == ETTR_EXPO_LIMITS_REACHED ? "Expo limits reached" : "Whoops";
goto err;
}
}
/* ok: */
ettr_beep();
NotifyBoxHide();
goto cleanup;
err:
ettr_beep();
ettr_beep();
NotifyBox(2000, err_msg);
goto cleanup;
cleanup:
auto_ettr_prepare_lv(1, 1);
auto_ettr_running = 0;
}
static void auto_ettr_step_lv_slow()
{
if (!auto_ettr || !AUTO_ETTR_TRIGGER_ALWAYS_ON)
return;
if (!auto_ettr_check_lv())
return;
if (get_halfshutter_pressed())
return;
/* only update once per 1.5 seconds, so the exposure has a chance to be updated on the LCD */
static int aux = INT_MIN;
if (!should_run_polling_action(1500, &aux))
return;
int corr = INT_MIN;
raw_lv_request();
if (raw_update_params())
{
corr = auto_ettr_get_correction();
}
raw_lv_release();
if (corr == INT_MIN)
return;
/* only correct if the image is overexposed by more than 0.2 EV or underexposed by more than 1 EV */
if (corr >= -20 && corr < 100)
return;
int status = auto_ettr_work(corr);
if (status == ETTR_SETTLED)
{
ettr_beep();
}
}
static void auto_ettr_step_lv()
{
if (can_set_frame_iso() && can_set_frame_shutter_timer())
auto_ettr_step_lv_fast();
else
auto_ettr_step_lv_slow();
}
static void auto_ettr_on_request_task(int unused)
{
if (can_set_frame_iso() && can_set_frame_shutter_timer())
auto_ettr_on_request_task_fast();
else
auto_ettr_on_request_task_slow();
}
static unsigned int auto_ettr_keypress_cbr(unsigned int key)
{
if (!auto_ettr) return 1;
if (AUTO_ETTR_TRIGGER_PHOTO) return 1;
if (!display_idle()) return 1;
if (!auto_ettr_check_pre_lv()) return 1;
if (lv && !auto_ettr_check_in_lv()) return 1;
if (
(IS_EOS_M && AUTO_ETTR_TRIGGER_BY_SET && detect_double_click(key, MODULE_KEY_TOUCH_1_FINGER, MODULE_KEY_UNTOUCH_1_FINGER)) ||
(!IS_EOS_M && AUTO_ETTR_TRIGGER_BY_SET && key == MODULE_KEY_PRESS_SET) ||
(AUTO_ETTR_TRIGGER_BY_HALFSHUTTER_DBLCLICK && detect_double_click(key, MODULE_KEY_PRESS_HALFSHUTTER, MODULE_KEY_UNPRESS_HALFSHUTTER)) ||
0)
{
if (!auto_ettr_running)
{
auto_ettr_running = 1;
task_create("ettr_task", 0x1c, 0x1000, auto_ettr_on_request_task, (void*) 0);
}
if (AUTO_ETTR_TRIGGER_BY_SET) return 0;
}
return 1;
}
static MENU_UPDATE_FUNC(auto_ettr_update)
{
if (lv && ((void*)&raw_lv_request == (void*)&ret_0))
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Auto ETTR Does not work in LV on this camera.");
if (shooting_mode != SHOOTMODE_M && !is_movie_mode() && !is_bulb_mode())
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Auto ETTR only works in M, BULB and RAW MOVIE modes.");
if (lens_info.raw_iso == 0)
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Auto ETTR requires manual ISO.");
if (!lv && !can_use_raw_overlays_photo() && AUTO_ETTR_TRIGGER_PHOTO)
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Photo RAW data not available, try in LiveView.");
menu_checkdep_raw(entry, info);
if (image_review_time == 0 && AUTO_ETTR_TRIGGER_PHOTO)
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Enable image review from Canon menu.");
if (is_hdr_bracketing_enabled() && !AUTO_ETTR_TRIGGER_BY_SET)
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Not compatible with HDR bracketing. Use trigger mode SET.");
if (lv && AUTO_ETTR_TRIGGER_ALWAYS_ON && !get_expsim())
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "In LiveView, this requires ExpSim enabled.");
if (is_continuous_drive() && AUTO_ETTR_TRIGGER_PHOTO)
MENU_SET_WARNING(MENU_WARN_ADVICE, "Not fully compatible with continuous drive.");
if (auto_ettr)
{
MENU_SET_VALUE(
AUTO_ETTR_TRIGGER_ALWAYS_ON ? "Always ON" :
AUTO_ETTR_TRIGGER_AUTO_SNAP ? "Auto Snap" :
AUTO_ETTR_TRIGGER_BY_SET && IS_EOS_M ? "Screen DblTap" :
AUTO_ETTR_TRIGGER_BY_SET && !IS_EOS_M ? "Press SET" :
AUTO_ETTR_TRIGGER_BY_HALFSHUTTER_DBLCLICK ? "HalfS DBC" : "err"
);
}
if (!AUTO_ETTR_TRIGGER_PHOTO)
{
MENU_SET_HELP("Press the shortcut key to optimize the exposure (ETTR).");
}
else if (AUTO_ETTR_TRIGGER_ALWAYS_ON)
{
if (lv) MENU_SET_HELP("In LiveView, just wait for exposure to settle, then shoot.");
else MENU_SET_HELP("Take a test picture (underexposed). Next pic will be ETTR.");
}
else if (AUTO_ETTR_TRIGGER_AUTO_SNAP)
{
MENU_SET_HELP("Press shutter once. ML will take a pic and retry if needed.");
}
/* recommended: move AF to back button */
if (auto_ettr && AUTO_ETTR_TRIGGER_BY_HALFSHUTTER_DBLCLICK && !is_manual_focus())
entry->works_best_in = DEP_CFN_AF_BACK_BUTTON;
else
entry->works_best_in = 0;
}
static MENU_UPDATE_FUNC(auto_ettr_max_shutter_update)
{
MENU_SET_VALUE("%s", ettr_format_shutter(auto_ettr_max_shutter));
if (auto_ettr_max_shutter < SHUTTER_30s)
{
MENU_SET_RINFO("BULB");
MENU_SET_WARNING(MENU_WARN_INFO, "For long exposures, enable bulb timer (maybe also intervalometer).");
}
if (is_intervalometer_running())
{
MENU_SET_WARNING(MENU_WARN_INFO, "Slowest shutter will be limited by interval time minus 2 seconds.");
}
if (auto_ettr_adjust_mode == 1)
{
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Adjust shutter speed from top scrollwheel, outside menu.");
}
}
static MENU_SELECT_FUNC(auto_ettr_max_shutter_toggle)
{
if (auto_ettr_adjust_mode == 0)
{
/* adjust in 0.5 EV steps, from 1/4096 to 4096 seconds */
const int tv_max = SHUTTER_1_4000;
const int tv_min = SHUTTER_1s - EXPO_FULL_STOP * 12;
auto_ettr_max_shutter = MOD(auto_ettr_max_shutter/4*4 - tv_min + delta * 4, tv_max - tv_min + 4) + tv_min;
}
}
PROP_HANDLER(PROP_GUI_STATE)
{
if (buf[0] == GUISTATE_QR)
{
if (AUTO_ETTR_TRIGGER_PHOTO)
auto_ettr_step();
}
}
MENU_UPDATE_FUNC(auto_ettr_intervalometer_warning)
{
if (auto_ettr && image_review_time == 0 && AUTO_ETTR_TRIGGER_PHOTO)
MENU_SET_WARNING(MENU_WARN_NOT_WORKING, "Auto ETTR: enable image review from Canon menu.");
}
void auto_ettr_intervalometer_wait()
{
if (auto_ettr && image_review_time)
{
/* make sure auto ETTR has a chance to run (it's triggered by prop handler on QR mode) */
/* timeout: a bit more than exposure time, to handle long expo noise reduction */
for (int i = 0; i < raw2shutter_ms(ettr_get_current_raw_shutter())/100; i++)
{
if (gui_state == GUISTATE_PLAYMENU || gui_state == GUISTATE_QR) break;
msleep(150);
}
msleep(500);
}
}
static unsigned int auto_ettr_polling_cbr()
{
if (lv && NOT_RECORDING && ((void*)&raw_lv_request != (void*)&ret_0))
auto_ettr_step_lv();
return 0;
}
static MENU_SELECT_FUNC(debug_info_toggle)
{
debug_info = !debug_info;
/* fixme: kinda ugly */
if (debug_info) console_show();
else console_hide();
}
static struct menu_entry ettr_menu[] =
{
{
.name = "Auto ETTR",
.priv = &auto_ettr,
.update = auto_ettr_update,
.max = 1,
.help = "Auto expose to the right when you shoot RAW.",
.submenu_width = 710,
.children = (struct menu_entry[]) {
{
.name = "Trigger mode",
.priv = &auto_ettr_trigger,
.max = 3, // NOTE: Modifed by the module init task to disable ETTR in LV if not supported
// choices is set in module init because it is dynamic now
//~ .choices =
.help = "When should the exposure be adjusted for ETTR:",
// help2 is set in module init because it is dynamic now
//~ .help2 =
},
{
.name = "Slowest shutter",
.priv = &auto_ettr_max_shutter,
.select = auto_ettr_max_shutter_toggle,
.update = auto_ettr_max_shutter_update,
.min = 16,
.max = 152,
.icon_type = IT_PERCENT,
.help = "Slowest shutter speed for ETTR (longest exposure time)."
},
{
.name = "Exposure target",
.priv = &auto_ettr_target_level,
.min = -4,
.max = 0,
.choices = CHOICES("-4 EV", "-3 EV", "-2 EV", "-1 EV", "-0.5 EV"),
.help = "Exposure target for ETTR. Recommended: -0.5 or -1 EV.",
.advanced = 1,
},
{
.name = "Highlight ignore",
.priv = &auto_ettr_ignore,
.min = 0,
.max = 500,
.unit = UNIT_PERCENT_x10,
.icon_type = IT_PERCENT,
.help = "How many bright pixels are allowed above the target level.",
.help2 = "Use this to allow spec(ta)cular highlights to be clipped.",
},
{
.name = "Allow clipping",
.priv = &auto_ettr_clip,
.max = 2,
.choices = CHOICES("OFF", "Green channel", "Any channel"),
.help = "Choose what color channels are allowed to be clipped.",
.advanced = 1,
},
{
.name = "Midtone SNR limit",
.priv = &auto_ettr_midtone_snr_limit,
.min = 0,
.max = 8,
.choices = CHOICES("OFF", "1 EV", "2 EV", "3 EV", "4 EV", "5 EV", "6 EV", "7 EV", "8 EV"),
.help = "Stop underexposing when at least half of the image gets",
.help2 = "noisier than selected SNR => will clip more highlights.",
.depends_on = DEP_MANUAL_ISO,
},
{
.name = "Shadow SNR limit",
.priv = &auto_ettr_shadow_snr_limit,
.min = 0,
.max = 6,
.choices = CHOICES("OFF", "1 EV", "2 EV", "3 EV", "4 EV", "5 EV", "6 EV"),
.help = "Stop underexposing when at least 5% of the image gets",
.help2 = "noisier than selected SNR => will clip more highlights.",
.depends_on = DEP_MANUAL_ISO,
},
{
.name = "Link to Canon shutter",
.priv = &auto_ettr_adjust_mode,
.max = 1,
.help = "Hack to adjust slowest shutter from main dial.",
.advanced = 1,
},
{
.name = "Link to Dual ISO",
.priv = &auto_ettr_dual_iso_link,
.max = 1,
.help = "Let ETTR change DualISO settings so you get the SNR values",
.help2 = "in mids & shadows. It will disable dual ISO if not needed.",
},
{
.name = "Show metered areas",
.priv = &show_metered_areas,
.max = 1,
.help = "Show where the white point and the SNR levels are metered",
.help2 = "(what exactly is considered highlight, midtone and shadow).",
.advanced = 1,
},
{
.name = "Allow beeps",
.priv = &auto_ettr_allow_beeps,
.max = 1,
.help = "Make status beeps (1 = OK, 2 = need more pictures, 3 = error).",
.advanced = 1,
},
{
.name = "Show debug info",
.priv = &debug_info,
.select = debug_info_toggle,
.max = 1,
.help = "For camera nerds.",
.advanced = 1,
},
MENU_ADVANCED_TOGGLE,
MENU_EOL,
},
},
};
static const char * trigger_choices_eosm[] = {"Always ON", "Auto Snap", "Screen DblTap", "HalfS DblClick"};
static const char * trigger_choices_others[] = {"Always ON", "Auto Snap", "Press SET", "HalfS DblClick"};
static const char * trigger_help_eosm =
"Always ON: when you take a pic, or continuously in LiveView\n"
"Auto Snap: after u take a pic,trigger another pic if needed\n"
"Screen DblTap: meter for ETTR when you tap the screen twice\n"
"HalfS DblClick: meter for ETTR when pressing halfshutter 2x\n";
static const char * trigger_help_others =
"Always ON: when you take a pic, or continuously in LiveView\n"
"Auto Snap: after u take a pic,trigger another pic if needed\n"
"Press SET: meter for ETTR when you press SET (LiveView)\n"
"HalfS DblClick: meter for ETTR when pressing halfshutter 2x\n";
static unsigned int ettr_init()
{
if ((void*)&raw_lv_request == (void*)&ret_0)
{
auto_ettr_trigger = auto_ettr_trigger > 1 ? 0 : auto_ettr_trigger;
ettr_menu[0].children[0].max = 1;
}
// Modify menu for the EOS M
if (IS_EOS_M)
{
ettr_menu[0].children[0].choices = trigger_choices_eosm;
ettr_menu[0].children[0].help2 = trigger_help_eosm;
}
else
{
ettr_menu[0].children[0].choices = trigger_choices_others;
ettr_menu[0].children[0].help2 = trigger_help_others;
}
menu_add("Expo", ettr_menu, COUNT(ettr_menu));
return 0;
}
static unsigned int ettr_deinit()
{
return 0;
}
MODULE_INFO_START()
MODULE_INIT(ettr_init)
MODULE_DEINIT(ettr_deinit)
MODULE_INFO_END()
MODULE_CBRS_START()
MODULE_CBR(CBR_VSYNC_SETPARAM, auto_ettr_vsync_cbr, 0)
MODULE_CBR(CBR_KEYPRESS, auto_ettr_keypress_cbr, 0)
MODULE_CBR(CBR_SHOOT_TASK, auto_ettr_polling_cbr, 0)
MODULE_CBRS_END()
MODULE_PROPHANDLERS_START()
MODULE_PROPHANDLER(PROP_GUI_STATE)
MODULE_PROPHANDLERS_END()
MODULE_CONFIGS_START()
MODULE_CONFIG(auto_ettr)
MODULE_CONFIG(auto_ettr_trigger)
MODULE_CONFIG(auto_ettr_ignore)
MODULE_CONFIG(auto_ettr_target_level)
MODULE_CONFIG(auto_ettr_max_shutter)
MODULE_CONFIG(auto_ettr_clip)
MODULE_CONFIG(auto_ettr_adjust_mode)
MODULE_CONFIG(auto_ettr_midtone_snr_limit)
MODULE_CONFIG(auto_ettr_shadow_snr_limit)
MODULE_CONFIG(auto_ettr_dual_iso_link)
MODULE_CONFIG(auto_ettr_allow_beeps)
MODULE_CONFIGS_END()