https://github.com/mozilla/gecko-dev
Raw File
Tip revision: f23ca81fc750fb4dbaa3cdad78d5f0378706ba8e authored by seabld on 29 April 2012, 08:09:23 UTC
Added tag SEAMONKEY_2_9_1_RELEASE for changeset FIREFOX_12_0_BUILD1. CLOSED TREE a=release
Tip revision: f23ca81
TestDeque.cpp
/* -*- Mode: C++; tab-width: 2; indent-tabs-mode: nil; c-basic-offset: 2 -*- */
/* ***** BEGIN LICENSE BLOCK *****
 * Version: MPL 1.1/GPL 2.0/LGPL 2.1
 *
 * The contents of this file are subject to the Mozilla Public License Version
 * 1.1 (the "License"); you may not use this file except in compliance with
 * the License. You may obtain a copy of the License at
 * http://www.mozilla.org/MPL/
 *
 * Software distributed under the License is distributed on an "AS IS" basis,
 * WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
 * for the specific language governing rights and limitations under the
 * License.
 *
 * The Original Code is mozilla.org code.
 *
 * The Initial Developer of the Original Code is
 * Netscape Communications Corporation.
 * Portions created by the Initial Developer are Copyright (C) 1998
 * the Initial Developer. All Rights Reserved.
 *
 * Contributor(s):
 *
 * Alternatively, the contents of this file may be used under the terms of
 * either of the GNU General Public License Version 2 or later (the "GPL"),
 * or the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
 * in which case the provisions of the GPL or the LGPL are applicable instead
 * of those above. If you wish to allow use of your version of this file only
 * under the terms of either the GPL or the LGPL, and not to allow others to
 * use your version of this file under the terms of the MPL, indicate your
 * decision by deleting the provisions above and replace them with the notice
 * and other provisions required by the GPL or the LGPL. If you do not delete
 * the provisions above, a recipient may use your version of this file under
 * the terms of any one of the MPL, the GPL or the LGPL.
 *
 * ***** END LICENSE BLOCK ***** */

#include "TestHarness.h"
#include "nsDeque.h"
#include "nsCRT.h"
#include <stdio.h>

/**************************************************************
  Now define the token deallocator class...
 **************************************************************/
class _TestDeque {
public:
  int Test();
private:
  int OriginalTest();
  int OriginalFlaw();
  int AssignFlaw();
  int TestRemove();
};
static _TestDeque sTestDeque;

class _Dealloc: public nsDequeFunctor {
  virtual void* operator()(void* aObject) {
    return 0;
  }
};

#define TEST(aCondition, aMsg) \
  if (!(aCondition)) { fail("TestDeque: "#aMsg); return 1; }


/**
 * conduct automated self test for this class
 *
 * @param
 * @return
 */
int _TestDeque::Test() {
  /* the old deque should have failed a bunch of these tests */
  int results=0;
  results+=OriginalTest();
  results+=OriginalFlaw();
  results+=AssignFlaw();
  results+=TestRemove();
  return results;
}

int _TestDeque::OriginalTest() {
  const int size = 200;
  int ints[size];
  int i=0;
  int temp;
  nsDeque theDeque(new _Dealloc); //construct a simple one...
 
  // ints = [0...199]
  for (i=0;i<size;i++) { //initialize'em
    ints[i]=i;
  }
  // queue = [0...69]
  for (i=0;i<70;i++) {
    theDeque.Push(&ints[i]);
    temp=*(int*)theDeque.Peek();
    TEST(temp == i, "Verify end after push #1");
    TEST(theDeque.GetSize() == i + 1, "Verify size after push #1");
  }
  TEST(theDeque.GetSize() == 70, "Verify overall size after pushes #1");
  // queue = [0...14]
  for (i=1;i<=55;i++) {
    temp=*(int*)theDeque.Pop();
    TEST(temp == 70-i, "Verify end after pop # 1");
    TEST(theDeque.GetSize() == 70 - i, "Verify size after pop # 1");
  }
  TEST(theDeque.GetSize() == 15, "Verify overall size after pops");

  // queue = [0...14,0...54]
  for (i=0;i<55;i++) {
    theDeque.Push(&ints[i]);
    temp=*(int*)theDeque.Peek();
    TEST(temp == i, "Verify end after push #2");
    TEST(theDeque.GetSize() == i + 15 + 1, "Verify size after push # 2");
  }
  TEST(theDeque.GetSize() == 70, "Verify size after end of all pushes #2");

  // queue = [0...14,0...19]
  for (i=1;i<=35;i++) {
    temp=*(int*)theDeque.Pop();
    TEST(temp == 55-i, "Verify end after pop # 2");
    TEST(theDeque.GetSize() == 70 - i, "Verify size after pop #2");
  }
  TEST(theDeque.GetSize() == 35, "Verify overall size after end of all pops #2");

  // queue = [0...14,0...19,0...34]
  for (i=0;i<35;i++) {
    theDeque.Push(&ints[i]);
    temp = *(int*)theDeque.Peek();
    TEST(temp == i, "Verify end after push # 3");
    TEST(theDeque.GetSize() == 35 + 1 + i, "Verify size after push #3");
  }

  // queue = [0...14,0...19]
  for (i=0;i<35;i++) {
    temp=*(int*)theDeque.Pop();
    TEST(temp == 34 - i, "Verify end after pop # 3");
  }

  // queue = [0...14]
  for (i=0;i<20;i++) {
    temp=*(int*)theDeque.Pop();
    TEST(temp == 19 - i, "Verify end after pop # 4");
  }

  // queue = []
  for (i=0;i<15;i++) {
    temp=*(int*)theDeque.Pop();
    TEST(temp == 14 - i, "Verify end after pop # 5");
  }

  TEST(theDeque.GetSize() == 0, "Deque should finish empty.");

  return 0;
}

int _TestDeque::OriginalFlaw() {
  int ints[200];
  int i=0;
  int temp;
  nsDeque d(new _Dealloc);
  /**
   * Test 1. Origin near end, semi full, call Peek().
   * you start, mCapacity is 8
   */
  printf("fill array\n");
  for (i=0; i<30; i++)
    ints[i]=i;

  for (i=0; i<6; i++) {
    d.Push(&ints[i]);
    temp = *(int*)d.Peek();
    TEST(temp == i, "OriginalFlaw push #1");
  }
  TEST(d.GetSize() == 6, "OriginalFlaw size check #1");

  for (i=0; i<4; i++) {
    temp=*(int*)d.PopFront();
    TEST(temp == i, "PopFront test");
  }
  // d = [4,5]
  TEST(d.GetSize() == 2, "OriginalFlaw size check #2");

  for (i=0; i<4; i++) {
    d.Push(&ints[6 + i]);
  }
  // d = [4...9]

  for (i=4; i<=9; i++) {
    temp=*(int*)d.PopFront();
    TEST(temp == i, "OriginalFlaw empty check");
  }

  return 0;
}

int _TestDeque::AssignFlaw() {
  nsDeque src(new _Dealloc),dest(new _Dealloc);
  return 0;
}

static bool VerifyContents(const nsDeque& aDeque, const int* aContents, int aLength) {
  for (int i=0; i<aLength; ++i) {
    if (*(int*)aDeque.ObjectAt(i) != aContents[i]) {
      return false;
    }
  }
  return true;
}

int _TestDeque::TestRemove() {
  nsDeque d;
  const int count = 10;
  int ints[count];
  for (int i=0; i<count; i++) {
    ints[i] = i;
  }

  for (int i=0; i<6; i++) {
    d.Push(&ints[i]);
  }
  // d = [0...5]
  d.PopFront();
  d.PopFront();

  // d = [2,5]
  for (int i=2; i<=5; i++) {
    int t = *(int*)d.ObjectAt(i-2);
    TEST(t == i, "Verify ObjectAt()");
  }

  d.RemoveObjectAt(1);
  // d == [2,4,5]
  static const int t1[] = {2,4,5};
  TEST(VerifyContents(d, t1, 3), "verify contents t1");

  d.PushFront(&ints[1]);
  d.PushFront(&ints[0]);
  d.PushFront(&ints[7]);
  d.PushFront(&ints[6]);
  //  d == [6,7,0,1,2,4,5] // (0==mOrigin)
  static const int t2[] = {6,7,0,1,2,4,5};
  TEST(VerifyContents(d, t2, 7), "verify contents t2");

  d.RemoveObjectAt(1);
  //  d == [6,0,1,2,4,5] // (1==mOrigin)
  static const int t3[] = {6,0,1,2,4,5};
  TEST(VerifyContents(d, t3, 6), "verify contents t3");

  d.RemoveObjectAt(5);
  //  d == [6,0,1,2,4] // (1==mOrigin)
  static const int t4[] = {6,0,1,2,4};
  TEST(VerifyContents(d, t4, 5), "verify contents t4");

  d.RemoveObjectAt(0);
  //  d == [0,1,2,4] // (2==mOrigin)
  static const int t5[] = {0,1,2,4};
  TEST(VerifyContents(d, t5, 4), "verify contents t5");


  return 0;
}

int main (void) {
  ScopedXPCOM xpcom("TestTimers");
  NS_ENSURE_FALSE(xpcom.failed(), 1);

  _TestDeque test;
  int result = test.Test();
  TEST(result == 0, "All tests pass");
  return 0;
}
back to top