https://github.com/mozilla/gecko-dev
Tip revision: 1119b8729a7a78f5a76aac71fd46795094cfa56d authored by ffxbld on 22 September 2011, 21:45:23 UTC
Added tag FENNEC_7_0_BUILD2 for changeset d4f603adb72c. CLOSED TREE a=release
Added tag FENNEC_7_0_BUILD2 for changeset d4f603adb72c. CLOSED TREE a=release
Tip revision: 1119b87
rules.mk
#
# ***** BEGIN LICENSE BLOCK *****
# Version: MPL 1.1/GPL 2.0/LGPL 2.1
#
# The contents of this file are subject to the Mozilla Public License Version
# 1.1 (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
# http://www.mozilla.org/MPL/
#
# Software distributed under the License is distributed on an "AS IS" basis,
# WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License
# for the specific language governing rights and limitations under the
# License.
#
# The Original Code is the Netscape security libraries.
#
# The Initial Developer of the Original Code is
# Netscape Communications Corporation.
# Portions created by the Initial Developer are Copyright (C) 1994-2000
# the Initial Developer. All Rights Reserved.
#
# Contributor(s):
#
# Alternatively, the contents of this file may be used under the terms of
# either the GNU General Public License Version 2 or later (the "GPL"), or
# the GNU Lesser General Public License Version 2.1 or later (the "LGPL"),
# in which case the provisions of the GPL or the LGPL are applicable instead
# of those above. If you wish to allow use of your version of this file only
# under the terms of either the GPL or the LGPL, and not to allow others to
# use your version of this file under the terms of the MPL, indicate your
# decision by deleting the provisions above and replace them with the notice
# and other provisions required by the GPL or the LGPL. If you do not delete
# the provisions above, a recipient may use your version of this file under
# the terms of any one of the MPL, the GPL or the LGPL.
#
# ***** END LICENSE BLOCK *****
#######################################################################
### ###
### R U L E S O F E N G A G E M E N T ###
### ###
#######################################################################
#######################################################################
# Double-Colon rules for utilizing the binary release model. #
#######################################################################
all:: export libs
ifeq ($(AUTOCLEAN),1)
autobuild:: clean export private_export libs program install
else
autobuild:: export private_export libs program install
endif
platform::
@echo $(OBJDIR_NAME)
ifeq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
USE_NT_C_SYNTAX=1
endif
#
# IMPORTS will always be associated with a component. Therefore,
# the "import" rule will always change directory to the top-level
# of a component, and traverse the IMPORTS keyword from the
# "manifest.mn" file located at this level only.
#
# note: if there is a trailing slash, the component will be appended
# (see import.pl - only used for xpheader.jar)
import::
@echo "== import.pl =="
@$(PERL) -I$(CORE_DEPTH)/coreconf $(CORE_DEPTH)/coreconf/import.pl \
"RELEASE_TREE=$(RELEASE_TREE)" \
"IMPORTS=$(IMPORTS)" \
"VERSION=$(VERSION)" \
"OS_ARCH=$(OS_ARCH)" \
"PLATFORM=$(PLATFORM)" \
"OVERRIDE_IMPORT_CHECK=$(OVERRIDE_IMPORT_CHECK)" \
"ALLOW_VERSION_OVERRIDE=$(ALLOW_VERSION_OVERRIDE)" \
"SOURCE_RELEASE_PREFIX=$(SOURCE_RELEASE_XP_DIR)" \
"SOURCE_MD_DIR=$(SOURCE_MD_DIR)" \
"SOURCE_XP_DIR=$(SOURCE_XP_DIR)" \
"FILES=$(IMPORT_XPCLASS_JAR) $(XPHEADER_JAR) $(MDHEADER_JAR) $(MDBINARY_JAR)" \
"$(IMPORT_XPCLASS_JAR)=$(IMPORT_XP_DIR)|$(IMPORT_XPCLASS_DIR)|" \
"$(XPHEADER_JAR)=$(IMPORT_XP_DIR)|$(SOURCE_XP_DIR)/public/|v" \
"$(MDHEADER_JAR)=$(IMPORT_MD_DIR)|$(SOURCE_MD_DIR)/include|" \
"$(MDBINARY_JAR)=$(IMPORT_MD_DIR)|$(SOURCE_MD_DIR)|"
# On Mac OS X ranlib needs to be rerun after static libs are moved.
ifeq ($(OS_TARGET),Darwin)
find $(SOURCE_MD_DIR)/lib -name "*.a" -exec $(RANLIB) {} \;
endif
export::
+$(LOOP_OVER_DIRS)
private_export::
+$(LOOP_OVER_DIRS)
release_export::
+$(LOOP_OVER_DIRS)
release_classes::
+$(LOOP_OVER_DIRS)
libs program install:: $(TARGETS)
ifdef LIBRARY
$(INSTALL) -m 664 $(LIBRARY) $(SOURCE_LIB_DIR)
endif
ifdef SHARED_LIBRARY
$(INSTALL) -m 775 $(SHARED_LIBRARY) $(SOURCE_LIB_DIR)
ifdef MOZ_DEBUG_SYMBOLS
ifeq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
$(INSTALL) -m 644 $(SHARED_LIBRARY:$(DLL_SUFFIX)=pdb) $(SOURCE_LIB_DIR)
endif
endif
endif
ifdef IMPORT_LIBRARY
$(INSTALL) -m 775 $(IMPORT_LIBRARY) $(SOURCE_LIB_DIR)
endif
ifdef PROGRAM
$(INSTALL) -m 775 $(PROGRAM) $(SOURCE_BIN_DIR)
ifdef MOZ_DEBUG_SYMBOLS
ifeq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
$(INSTALL) -m 644 $(PROGRAM:$(PROG_SUFFIX)=.pdb) $(SOURCE_BIN_DIR)
endif
endif
endif
ifdef PROGRAMS
$(INSTALL) -m 775 $(PROGRAMS) $(SOURCE_BIN_DIR)
endif
+$(LOOP_OVER_DIRS)
tests::
+$(LOOP_OVER_DIRS)
clean clobber::
rm -rf $(ALL_TRASH)
+$(LOOP_OVER_DIRS)
realclean clobber_all::
rm -rf $(wildcard *.OBJ) dist $(ALL_TRASH)
+$(LOOP_OVER_DIRS)
#######################################################################
# Double-Colon rules for populating the binary release model. #
#######################################################################
release_clean::
rm -rf $(SOURCE_XP_DIR)/release/$(RELEASE_MD_DIR)
release:: release_clean release_export release_classes release_policy release_md release_jars release_cpdistdir
release_cpdistdir::
@echo "== cpdist.pl =="
@$(PERL) -I$(CORE_DEPTH)/coreconf $(CORE_DEPTH)/coreconf/cpdist.pl \
"RELEASE_TREE=$(RELEASE_TREE)" \
"CORE_DEPTH=$(CORE_DEPTH)" \
"MODULE=${MODULE}" \
"OS_ARCH=$(OS_ARCH)" \
"RELEASE=$(RELEASE)" \
"PLATFORM=$(PLATFORM)" \
"RELEASE_VERSION=$(RELEASE_VERSION)" \
"SOURCE_RELEASE_PREFIX=$(SOURCE_RELEASE_XP_DIR)" \
"RELEASE_XP_DIR=$(RELEASE_XP_DIR)" \
"RELEASE_MD_DIR=$(RELEASE_MD_DIR)" \
"FILES=$(XPCLASS_JAR) $(XPCLASS_DBG_JAR) $(XPHEADER_JAR) $(MDHEADER_JAR) $(MDBINARY_JAR) XP_FILES MD_FILES" \
"$(XPCLASS_JAR)=$(SOURCE_RELEASE_CLASSES_DIR)|x"\
"$(XPCLASS_DBG_JAR)=$(SOURCE_RELEASE_CLASSES_DBG_DIR)|x"\
"$(XPHEADER_JAR)=$(SOURCE_RELEASE_XPHEADERS_DIR)|x" \
"$(MDHEADER_JAR)=$(SOURCE_RELEASE_MDHEADERS_DIR)|m" \
"$(MDBINARY_JAR)=$(SOURCE_RELEASE_MD_DIR)|m" \
"XP_FILES=$(XP_FILES)|xf" \
"MD_FILES=$(MD_FILES)|mf"
# $(SOURCE_RELEASE_xxx_JAR) is a name like yyy.jar
# $(SOURCE_RELEASE_xx_DIR) is a name like
release_jars::
@echo "== release.pl =="
@$(PERL) -I$(CORE_DEPTH)/coreconf $(CORE_DEPTH)/coreconf/release.pl \
"RELEASE_TREE=$(RELEASE_TREE)" \
"PLATFORM=$(PLATFORM)" \
"OS_ARCH=$(OS_ARCH)" \
"RELEASE_VERSION=$(RELEASE_VERSION)" \
"SOURCE_RELEASE_DIR=$(SOURCE_RELEASE_DIR)" \
"FILES=$(XPCLASS_JAR) $(XPCLASS_DBG_JAR) $(XPHEADER_JAR) $(MDHEADER_JAR) $(MDBINARY_JAR)" \
"$(XPCLASS_JAR)=$(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_CLASSES_DIR)|b"\
"$(XPCLASS_DBG_JAR)=$(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_CLASSES_DBG_DIR)|b"\
"$(XPHEADER_JAR)=$(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_XPHEADERS_DIR)|a" \
"$(MDHEADER_JAR)=$(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_MDHEADERS_DIR)|a" \
"$(MDBINARY_JAR)=$(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_MD_DIR)|bi"
# Rules for releasing classes.
# We have to do some REALLY gross stuff to deal with multiple classes in one
# file, as well as nested classes, which have a filename of the form
# ContainingClass$NestedClass.class.
# RELEASE_CLASSES simply performs a required patsubst on CLASSES
# RELEASE_CLASS_PATH is RELEASE_CLASSES with the path (in ns/dist) prepended
# RELEASE_NESTED is all the nested classes in RELEASE_CLASS_PATH. We use a
# foreach and wildcard to get all the files that start out like one of the
# class files, then have a $. So, for each class file, we look for file$*
# RELEASE_FILES is the combination of RELEASE_NESTED and the class files
# specified by RELEASE_CLASSES which have .class appended to them. Note that
# the RELEASE_NESTED don't need to have .class appended because they were
# read in from the wildcard as complete filenames.
#
# The _DBG versions are the debuggable ones.
ifneq ($(CLASSES),)
RELEASE_CLASSES := $(patsubst %,%,$(CLASSES))
ifdef BUILD_OPT
RELEASE_CLASS_PATH := $(patsubst %,$(SOURCE_CLASSES_DIR)/$(PACKAGE)/%, $(RELEASE_CLASSES))
RELEASE_NESTED := $(foreach file,$(RELEASE_CLASS_PATH),$(wildcard $(file)$$*))
RELEASE_FILES := $(patsubst %,%.class,$(RELEASE_CLASS_PATH)) $(RELEASE_NESTED)
else
RELEASE_DBG_CLASS_PATH:= $(patsubst %,$(SOURCE_CLASSES_DBG_DIR)/$(PACKAGE)/%, $(RELEASE_CLASSES))
RELEASE_DBG_NESTED := $(foreach file,$(RELEASE_DBG_CLASS_PATH),$(wildcard $(file)$$*))
RELEASE_DBG_FILES := $(patsubst %,%.class,$(RELEASE_DBG_CLASS_PATH)) $(RELEASE_DBG_NESTED)
endif
# Substitute \$ for $ so the shell doesn't choke
ifdef BUILD_OPT
release_classes::
$(INSTALL) -m 444 $(subst $$,\$$,$(RELEASE_FILES)) $(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_CLASSES_DIR)/$(PACKAGE)
else
release_classes::
$(INSTALL) -m 444 $(subst $$,\$$,$(RELEASE_DBG_FILES)) $(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_CLASSES_DBG_DIR)/$(PACKAGE)
endif
endif
release_policy::
+$(LOOP_OVER_DIRS)
ifndef NO_MD_RELEASE
ifdef LIBRARY
MD_LIB_RELEASE_FILES += $(LIBRARY)
endif
ifdef SHARED_LIBRARY
MD_LIB_RELEASE_FILES += $(SHARED_LIBRARY)
endif
ifdef IMPORT_LIBRARY
MD_LIB_RELEASE_FILES += $(IMPORT_LIBRARY)
endif
ifdef PROGRAM
MD_BIN_RELEASE_FILES += $(PROGRAM)
endif
ifdef PROGRAMS
MD_BIN_RELEASE_FILES += $(PROGRAMS)
endif
endif
release_md::
ifneq ($(MD_LIB_RELEASE_FILES),)
$(INSTALL) -m 444 $(MD_LIB_RELEASE_FILES) $(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_LIB_DIR)
endif
ifneq ($(MD_BIN_RELEASE_FILES),)
$(INSTALL) -m 555 $(MD_BIN_RELEASE_FILES) $(SOURCE_RELEASE_PREFIX)/$(SOURCE_RELEASE_BIN_DIR)
endif
+$(LOOP_OVER_DIRS)
alltags:
rm -f TAGS
find . -name dist -prune -o \( -name '*.[hc]' -o -name '*.cp' -o -name '*.cpp' \) -print | xargs etags -a
find . -name dist -prune -o \( -name '*.[hc]' -o -name '*.cp' -o -name '*.cpp' \) -print | xargs ctags -a
$(PROGRAM): $(OBJS) $(EXTRA_LIBS)
@$(MAKE_OBJDIR)
ifeq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
$(MKPROG) $(subst /,\\,$(OBJS)) -Fe$@ -link $(LDFLAGS) $(subst /,\\,$(EXTRA_LIBS) $(EXTRA_SHARED_LIBS) $(OS_LIBS)) $(EXTRA_EXE_LD_FLAGS)
ifdef MT
if test -f $@.manifest; then \
$(MT) -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \
rm -f $@.manifest; \
fi
endif # MSVC with manifest tool
else
$(MKPROG) -o $@ $(CFLAGS) $(OBJS) $(LDFLAGS) $(EXTRA_LIBS) $(EXTRA_SHARED_LIBS) $(OS_LIBS)
endif
get_objs:
@echo $(OBJS)
$(LIBRARY): $(OBJS)
@$(MAKE_OBJDIR)
rm -f $@
ifeq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
$(AR) $(subst /,\\,$(OBJS))
else
$(AR) $(OBJS)
endif
$(RANLIB) $@
ifeq ($(OS_TARGET),OS2)
$(IMPORT_LIBRARY): $(MAPFILE)
rm -f $@
$(IMPLIB) $@ $<
$(RANLIB) $@
endif
ifdef SHARED_LIBRARY_LIBS
ifdef BUILD_TREE
SUB_SHLOBJS = $(foreach dir,$(SHARED_LIBRARY_DIRS),$(shell $(MAKE) -C $(dir) --no-print-directory get_objs))
else
SUB_SHLOBJS = $(foreach dir,$(SHARED_LIBRARY_DIRS),$(addprefix $(dir)/,$(shell $(MAKE) -C $(dir) --no-print-directory get_objs)))
endif
endif
$(SHARED_LIBRARY): $(OBJS) $(RES) $(MAPFILE) $(SUB_SHLOBJS)
@$(MAKE_OBJDIR)
rm -f $@
ifeq ($(OS_TARGET)$(OS_RELEASE), AIX4.1)
echo "#!" > $(OBJDIR)/lib$(LIBRARY_NAME)_syms
nm -B -C -g $(OBJS) \
| awk '/ [T,D] / {print $$3}' \
| sed -e 's/^\.//' \
| sort -u >> $(OBJDIR)/lib$(LIBRARY_NAME)_syms
$(LD) $(XCFLAGS) -o $@ $(OBJS) -bE:$(OBJDIR)/lib$(LIBRARY_NAME)_syms \
-bM:SRE -bnoentry $(OS_LIBS) $(EXTRA_LIBS) $(EXTRA_SHARED_LIBS)
else
ifeq (,$(filter-out WIN%,$(OS_TARGET)))
ifdef NS_USE_GCC
$(LINK_DLL) $(OBJS) $(SUB_SHLOBJS) $(EXTRA_LIBS) $(EXTRA_SHARED_LIBS) $(OS_LIBS) $(LD_LIBS) $(RES)
else
$(LINK_DLL) -MAP $(DLLBASE) $(subst /,\\,$(OBJS) $(SUB_SHLOBJS) $(EXTRA_LIBS) $(EXTRA_SHARED_LIBS) $(OS_LIBS) $(LD_LIBS) $(RES))
ifdef MT
if test -f $@.manifest; then \
$(MT) -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;2; \
rm -f $@.manifest; \
fi
endif # MSVC with manifest tool
endif
else
$(MKSHLIB) -o $@ $(OBJS) $(SUB_SHLOBJS) $(LD_LIBS) $(EXTRA_LIBS) $(EXTRA_SHARED_LIBS) $(OS_LIBS)
chmod +x $@
ifeq ($(OS_TARGET),Darwin)
ifdef MAPFILE
nmedit -s $(MAPFILE) $@
endif
endif
endif
endif
ifeq (,$(filter-out WIN%,$(OS_TARGET)))
$(RES): $(RESNAME)
@$(MAKE_OBJDIR)
# The resource compiler does not understand the -U option.
ifdef NS_USE_GCC
$(RC) $(filter-out -U%,$(DEFINES)) $(INCLUDES:-I%=--include-dir %) -o $@ $<
else
$(RC) $(filter-out -U%,$(DEFINES)) $(INCLUDES) -Fo$@ $<
endif
@echo $(RES) finished
endif
$(MAPFILE): $(MAPFILE_SOURCE)
@$(MAKE_OBJDIR)
$(PROCESS_MAP_FILE)
$(OBJDIR)/$(PROG_PREFIX)%$(PROG_SUFFIX): $(OBJDIR)/$(PROG_PREFIX)%$(OBJ_SUFFIX)
@$(MAKE_OBJDIR)
ifeq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
$(MKPROG) $< -Fe$@ -link \
$(LDFLAGS) $(EXTRA_LIBS) $(EXTRA_SHARED_LIBS) $(OS_LIBS) $(EXTRA_EXE_LD_FLAGS)
ifdef MT
if test -f $@.manifest; then \
$(MT) -NOLOGO -MANIFEST $@.manifest -OUTPUTRESOURCE:$@\;1; \
rm -f $@.manifest; \
fi
endif # MSVC with manifest tool
else
$(MKPROG) -o $@ $(CFLAGS) $< \
$(LDFLAGS) $(EXTRA_LIBS) $(EXTRA_SHARED_LIBS) $(OS_LIBS)
endif
WCCFLAGS1 := $(subst /,\\,$(CFLAGS))
WCCFLAGS2 := $(subst -I,-i=,$(WCCFLAGS1))
WCCFLAGS3 := $(subst -D,-d,$(WCCFLAGS2))
# Translate source filenames to absolute paths. This is required for
# debuggers under Windows & OS/2 to find source files automatically
ifeq (,$(filter-out OS2 AIX,$(OS_TARGET)))
# OS/2 and AIX
NEED_ABSOLUTE_PATH := 1
PWD := $(shell pwd)
else
# Windows
ifeq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
NEED_ABSOLUTE_PATH := 1
PWD := $(shell pwd)
ifeq (,$(findstring ;,$(PATH)))
ifndef USE_MSYS
PWD := $(subst \,/,$(shell cygpath -w $(PWD)))
endif
endif
else
# everything else
PWD := $(shell pwd)
endif
endif
# The quotes allow absolute paths to contain spaces.
core_abspath = "$(if $(findstring :,$(1)),$(1),$(if $(filter /%,$(1)),$(1),$(PWD)/$(1)))"
$(OBJDIR)/$(PROG_PREFIX)%$(OBJ_SUFFIX): %.c
@$(MAKE_OBJDIR)
ifdef USE_NT_C_SYNTAX
$(CC) -Fo$@ -c $(CFLAGS) $(call core_abspath,$<)
else
ifdef NEED_ABSOLUTE_PATH
$(CC) -o $@ -c $(CFLAGS) $(call core_abspath,$<)
else
$(CC) -o $@ -c $(CFLAGS) $<
endif
endif
$(PROG_PREFIX)%$(OBJ_SUFFIX): %.c
ifdef USE_NT_C_SYNTAX
$(CC) -Fo$@ -c $(CFLAGS) $(call core_abspath,$<)
else
ifdef NEED_ABSOLUTE_PATH
$(CC) -o $@ -c $(CFLAGS) $(call core_abspath,$<)
else
$(CC) -o $@ -c $(CFLAGS) $<
endif
endif
ifneq (,$(filter-out _WIN%,$(NS_USE_GCC)_$(OS_TARGET)))
$(OBJDIR)/$(PROG_PREFIX)%$(OBJ_SUFFIX): %.s
@$(MAKE_OBJDIR)
$(AS) -o $@ $(ASFLAGS) -c $<
endif
$(OBJDIR)/$(PROG_PREFIX)%$(OBJ_SUFFIX): %.asm
@$(MAKE_OBJDIR)
$(AS) -Fo$@ $(ASFLAGS) -c $<
$(OBJDIR)/$(PROG_PREFIX)%$(OBJ_SUFFIX): %.S
@$(MAKE_OBJDIR)
$(AS) -o $@ $(ASFLAGS) -c $<
$(OBJDIR)/$(PROG_PREFIX)%: %.cpp
@$(MAKE_OBJDIR)
ifdef USE_NT_C_SYNTAX
$(CCC) -Fo$@ -c $(CFLAGS) $(call core_abspath,$<)
else
ifdef NEED_ABSOLUTE_PATH
$(CCC) -o $@ -c $(CFLAGS) $(call core_abspath,$<)
else
$(CCC) -o $@ -c $(CFLAGS) $<
endif
endif
#
# Please keep the next two rules in sync.
#
$(OBJDIR)/$(PROG_PREFIX)%$(OBJ_SUFFIX): %.cc
@$(MAKE_OBJDIR)
$(CCC) -o $@ -c $(CFLAGS) $<
$(OBJDIR)/$(PROG_PREFIX)%$(OBJ_SUFFIX): %.cpp
@$(MAKE_OBJDIR)
ifdef STRICT_CPLUSPLUS_SUFFIX
echo "#line 1 \"$<\"" | cat - $< > $(OBJDIR)/t_$*.cc
$(CCC) -o $@ -c $(CFLAGS) $(OBJDIR)/t_$*.cc
rm -f $(OBJDIR)/t_$*.cc
else
ifdef USE_NT_C_SYNTAX
$(CCC) -Fo$@ -c $(CFLAGS) $(call core_abspath,$<)
else
ifdef NEED_ABSOLUTE_PATH
$(CCC) -o $@ -c $(CFLAGS) $(call core_abspath,$<)
else
$(CCC) -o $@ -c $(CFLAGS) $<
endif
endif
endif #STRICT_CPLUSPLUS_SUFFIX
%.i: %.cpp
$(CCC) -C -E $(CFLAGS) $< > $@
%.i: %.c
ifeq (,$(filter-out WIN%,$(OS_TARGET)))
$(CC) -C /P $(CFLAGS) $<
else
$(CC) -C -E $(CFLAGS) $< > $@
endif
ifneq (,$(filter-out WIN%,$(OS_TARGET)))
%.i: %.s
$(CC) -C -E $(CFLAGS) $< > $@
endif
%: %.pl
rm -f $@; cp $< $@; chmod +x $@
%: %.sh
rm -f $@; cp $< $@; chmod +x $@
ifdef DIRS
$(DIRS)::
@if test -d $@; then \
set $(EXIT_ON_ERROR); \
echo "cd $@; $(MAKE)"; \
cd $@; $(MAKE); \
set +e; \
else \
echo "Skipping non-directory $@..."; \
fi; \
$(CLICK_STOPWATCH)
endif
################################################################################
# Bunch of things that extend the 'export' rule (in order):
################################################################################
$(JAVA_DESTPATH) $(JAVA_DESTPATH)/$(PACKAGE) $(JMCSRCDIR)::
@if test ! -d $@; then \
echo Creating $@; \
rm -rf $@; \
$(NSINSTALL) -D $@; \
fi
################################################################################
## IDL_GEN
ifneq ($(IDL_GEN),)
#export::
# $(IDL2JAVA) $(IDL_GEN)
#all:: export
#clobber::
# rm -f $(IDL_GEN:.idl=.class) # XXX wrong!
endif
################################################################################
### JSRCS -- for compiling java files
###
### NOTE: For backwards compatibility, if $(NETLIBDEPTH) is defined,
### replace $(CORE_DEPTH) with $(NETLIBDEPTH).
###
ifneq ($(JSRCS),)
ifneq ($(JAVAC),)
ifdef NETLIBDEPTH
CORE_DEPTH := $(NETLIBDEPTH)
endif
JAVA_EXPORT_SRCS=$(shell $(PERL) $(CORE_DEPTH)/coreconf/outofdate.pl $(PERLARG) -d $(JAVA_DESTPATH)/$(PACKAGE) $(JSRCS) $(PRIVATE_JSRCS))
export:: $(JAVA_DESTPATH) $(JAVA_DESTPATH)/$(PACKAGE)
ifneq ($(JAVA_EXPORT_SRCS),)
$(JAVAC) $(JAVA_EXPORT_SRCS)
endif
all:: export
clobber::
rm -f $(SOURCE_XP_DIR)/classes/$(PACKAGE)/*.class
endif
endif
#
# JDIRS -- like JSRCS, except you can give a list of directories and it will
# compile all the out-of-date java files in those directories.
#
# NOTE: recursing through these can speed things up, but they also cause
# some builds to run out of memory
#
# NOTE: For backwards compatibility, if $(NETLIBDEPTH) is defined,
# replace $(CORE_DEPTH) with $(NETLIBDEPTH).
#
ifdef JDIRS
ifneq ($(JAVAC),)
ifdef NETLIBDEPTH
CORE_DEPTH := $(NETLIBDEPTH)
endif
# !!!!! THIS WILL CRASH SHMSDOS.EXE !!!!!
# shmsdos does not support shell variables. It will crash when it tries
# to parse the '=' character. A solution is to rewrite outofdate.pl so it
# takes the Javac command as an argument and executes the command itself,
# instead of returning a list of files.
export:: $(JAVA_DESTPATH) $(JAVA_DESTPATH)/$(PACKAGE)
@echo "!!! THIS COMMAND IS BROKEN ON WINDOWS--SEE rules.mk FOR DETAILS !!!"
return -1
@for d in $(JDIRS); do \
if test -d $$d; then \
set $(EXIT_ON_ERROR); \
files=`echo $$d/*.java`; \
list=`$(PERL) $(CORE_DEPTH)/coreconf/outofdate.pl $(PERLARG) \
-d $(JAVA_DESTPATH)/$(PACKAGE) $$files`; \
if test "$${list}x" != "x"; then \
echo Building all java files in $$d; \
echo $(JAVAC) $$list; \
$(JAVAC) $$list; \
fi; \
set +e; \
else \
echo "Skipping non-directory $$d..."; \
fi; \
$(CLICK_STOPWATCH); \
done
endif
endif
#
# JDK_GEN -- for generating "old style" native methods
#
# Generate JDK Headers and Stubs into the '_gen' and '_stubs' directory
#
# NOTE: For backwards compatibility, if $(NETLIBDEPTH) is defined,
# replace $(CORE_DEPTH) with $(NETLIBDEPTH).
#
ifneq ($(JDK_GEN),)
ifneq ($(JAVAH),)
ifdef NSBUILDROOT
INCLUDES += -I$(JDK_GEN_DIR) -I$(SOURCE_XP_DIR)
else
INCLUDES += -I$(JDK_GEN_DIR)
endif
ifdef NETLIBDEPTH
CORE_DEPTH := $(NETLIBDEPTH)
endif
JDK_PACKAGE_CLASSES := $(JDK_GEN)
JDK_PATH_CLASSES := $(subst .,/,$(JDK_PACKAGE_CLASSES))
JDK_HEADER_CLASSFILES := $(patsubst %,$(JAVA_DESTPATH)/%.class,$(JDK_PATH_CLASSES))
JDK_STUB_CLASSFILES := $(patsubst %,$(JAVA_DESTPATH)/%.class,$(JDK_PATH_CLASSES))
JDK_HEADER_CFILES := $(patsubst %,$(JDK_GEN_DIR)/%.h,$(JDK_GEN))
JDK_STUB_CFILES := $(patsubst %,$(JDK_STUB_DIR)/%.c,$(JDK_GEN))
$(JDK_HEADER_CFILES): $(JDK_HEADER_CLASSFILES)
$(JDK_STUB_CFILES): $(JDK_STUB_CLASSFILES)
export::
@echo Generating/Updating JDK headers
$(JAVAH) -d $(JDK_GEN_DIR) $(JDK_PACKAGE_CLASSES)
@echo Generating/Updating JDK stubs
$(JAVAH) -stubs -d $(JDK_STUB_DIR) $(JDK_PACKAGE_CLASSES)
ifndef NO_MAC_JAVA_SHIT
@if test ! -d $(CORE_DEPTH)/lib/mac/Java/; then \
echo "!!! You need to have a ns/lib/mac/Java directory checked out."; \
echo "!!! This allows us to automatically update generated files for the mac."; \
echo "!!! If you see any modified files there, please check them in."; \
fi
@echo Generating/Updating JDK headers for the Mac
$(JAVAH) -mac -d $(CORE_DEPTH)/lib/mac/Java/_gen $(JDK_PACKAGE_CLASSES)
@echo Generating/Updating JDK stubs for the Mac
$(JAVAH) -mac -stubs -d $(CORE_DEPTH)/lib/mac/Java/_stubs $(JDK_PACKAGE_CLASSES)
endif
endif
endif
#
# JRI_GEN -- for generating "old style" JRI native methods
#
# Generate JRI Headers and Stubs into the 'jri' directory
#
# NOTE: For backwards compatibility, if $(NETLIBDEPTH) is defined,
# replace $(CORE_DEPTH) with $(NETLIBDEPTH).
#
ifneq ($(JRI_GEN),)
ifneq ($(JAVAH),)
ifdef NSBUILDROOT
INCLUDES += -I$(JRI_GEN_DIR) -I$(SOURCE_XP_DIR)
else
INCLUDES += -I$(JRI_GEN_DIR)
endif
ifdef NETLIBDEPTH
CORE_DEPTH := $(NETLIBDEPTH)
endif
JRI_PACKAGE_CLASSES := $(JRI_GEN)
JRI_PATH_CLASSES := $(subst .,/,$(JRI_PACKAGE_CLASSES))
JRI_HEADER_CLASSFILES := $(patsubst %,$(JAVA_DESTPATH)/%.class,$(JRI_PATH_CLASSES))
JRI_STUB_CLASSFILES := $(patsubst %,$(JAVA_DESTPATH)/%.class,$(JRI_PATH_CLASSES))
JRI_HEADER_CFILES := $(patsubst %,$(JRI_GEN_DIR)/%.h,$(JRI_GEN))
JRI_STUB_CFILES := $(patsubst %,$(JRI_GEN_DIR)/%.c,$(JRI_GEN))
$(JRI_HEADER_CFILES): $(JRI_HEADER_CLASSFILES)
$(JRI_STUB_CFILES): $(JRI_STUB_CLASSFILES)
export::
@echo Generating/Updating JRI headers
$(JAVAH) -jri -d $(JRI_GEN_DIR) $(JRI_PACKAGE_CLASSES)
@echo Generating/Updating JRI stubs
$(JAVAH) -jri -stubs -d $(JRI_GEN_DIR) $(JRI_PACKAGE_CLASSES)
ifndef NO_MAC_JAVA_SHIT
@if test ! -d $(CORE_DEPTH)/lib/mac/Java/; then \
echo "!!! You need to have a ns/lib/mac/Java directory checked out."; \
echo "!!! This allows us to automatically update generated files for the mac."; \
echo "!!! If you see any modified files there, please check them in."; \
fi
@echo Generating/Updating JRI headers for the Mac
$(JAVAH) -jri -mac -d $(CORE_DEPTH)/lib/mac/Java/_jri $(JRI_PACKAGE_CLASSES)
@echo Generating/Updating JRI stubs for the Mac
$(JAVAH) -jri -mac -stubs -d $(CORE_DEPTH)/lib/mac/Java/_jri $(JRI_PACKAGE_CLASSES)
endif
endif
endif
#
# JNI_GEN -- for generating JNI native methods
#
# Generate JNI Headers into the 'jni' directory
#
ifneq ($(JNI_GEN),)
ifneq ($(JAVAH),)
JNI_HEADERS := $(patsubst %,$(JNI_GEN_DIR)/%.h,$(JNI_GEN))
export::
@if test ! -d $(JNI_GEN_DIR); then \
echo $(JAVAH) -jni -d $(JNI_GEN_DIR) $(JNI_GEN); \
$(JAVAH) -jni -d $(JNI_GEN_DIR) $(JNI_GEN); \
else \
echo "Checking for out of date header files" ; \
$(PERL) $(CORE_DEPTH)/coreconf/jniregen.pl $(PERLARG) \
-d $(JAVA_DESTPATH) -j "$(JAVAH) -jni -d $(JNI_GEN_DIR)" $(JNI_GEN);\
fi
endif
endif
#
# JMC_EXPORT -- for declaring which java classes are to be exported for jmc
#
ifneq ($(JMC_EXPORT),)
JMC_EXPORT_PATHS := $(subst .,/,$(JMC_EXPORT))
JMC_EXPORT_FILES := $(patsubst %,$(JAVA_DESTPATH)/$(PACKAGE)/%.class,$(JMC_EXPORT_PATHS))
#
# We're doing NSINSTALL -t here (copy mode) because calling INSTALL will pick up
# your NSDISTMODE and make links relative to the current directory. This is a
# problem because the source isn't in the current directory:
#
export:: $(JMC_EXPORT_FILES) $(JMCSRCDIR)
$(NSINSTALL) -t -m 444 $(JMC_EXPORT_FILES) $(JMCSRCDIR)
endif
#
# JMC_GEN -- for generating java modules
#
# Provide default export & install rules when using JMC_GEN
#
ifneq ($(JMC_GEN),)
ifneq ($(JMC),)
INCLUDES += -I$(JMC_GEN_DIR) -I.
JMC_HEADERS := $(patsubst %,$(JMC_GEN_DIR)/%.h,$(JMC_GEN))
JMC_STUBS := $(patsubst %,$(JMC_GEN_DIR)/%.c,$(JMC_GEN))
JMC_OBJS := $(patsubst %,$(OBJDIR)/%$(OBJ_SUFFIX),$(JMC_GEN))
$(JMC_GEN_DIR)/M%.h: $(JMCSRCDIR)/%.class
$(JMC) -d $(JMC_GEN_DIR) -interface $(JMC_GEN_FLAGS) $(?F:.class=)
$(JMC_GEN_DIR)/M%.c: $(JMCSRCDIR)/%.class
$(JMC) -d $(JMC_GEN_DIR) -module $(JMC_GEN_FLAGS) $(?F:.class=)
$(OBJDIR)/M%$(OBJ_SUFFIX): $(JMC_GEN_DIR)/M%.c $(JMC_GEN_DIR)/M%.h
@$(MAKE_OBJDIR)
$(CC) -o $@ -c $(CFLAGS) $<
export:: $(JMC_HEADERS) $(JMC_STUBS)
endif
endif
#
# Copy each element of EXPORTS to $(SOURCE_XP_DIR)/public/$(MODULE)/
#
PUBLIC_EXPORT_DIR = $(SOURCE_XP_DIR)/public/$(MODULE)
ifneq ($(EXPORTS),)
$(PUBLIC_EXPORT_DIR)::
@if test ! -d $@; then \
echo Creating $@; \
$(NSINSTALL) -D $@; \
fi
export:: $(PUBLIC_EXPORT_DIR)
export:: $(EXPORTS)
$(INSTALL) -m 444 $^ $(PUBLIC_EXPORT_DIR)
export:: $(BUILT_SRCS)
endif
# Duplicate export rule for private exports, with different directories
PRIVATE_EXPORT_DIR = $(SOURCE_XP_DIR)/private/$(MODULE)
ifneq ($(PRIVATE_EXPORTS),)
$(PRIVATE_EXPORT_DIR)::
@if test ! -d $@; then \
echo Creating $@; \
$(NSINSTALL) -D $@; \
fi
private_export:: $(PRIVATE_EXPORT_DIR)
private_export:: $(PRIVATE_EXPORTS)
$(INSTALL) -m 444 $^ $(PRIVATE_EXPORT_DIR)
else
private_export::
@echo There are no private exports.;
endif
##########################################################################
### RULES FOR RUNNING REGRESSION SUITE TESTS
### REQUIRES 'REGRESSION_SPEC' TO BE SET TO THE NAME OF A REGRESSION SPECFILE
### AND RESULTS_SUBDIR TO BE SET TO SOMETHING LIKE SECURITY/PKCS5
##########################################################################
TESTS_DIR = $(RESULTS_DIR)/$(RESULTS_SUBDIR)/$(OS_TARGET)$(OS_RELEASE)$(CPU_TAG)$(COMPILER_TAG)$(IMPL_STRATEGY)
ifneq ($(REGRESSION_SPEC),)
ifneq ($(BUILD_OPT),)
REGDATE = $(subst \ ,, $(shell $(PERL) $(CORE_DEPTH)/$(MODULE)/scripts/now))
endif
tests:: $(REGRESSION_SPEC)
cd $(PLATFORM); \
../$(SOURCE_MD_DIR)/bin/regress$(PROG_SUFFIX) specfile=../$(REGRESSION_SPEC) progress $(EXTRA_REGRESS_OPTIONS); \
if test ! -d $(TESTS_DIR); then \
echo Creating $(TESTS_DIR); \
$(NSINSTALL) -D $(TESTS_DIR); \
fi
ifneq ($(BUILD_OPT),)
$(NSINSTALL) -m 664 $(PLATFORM)/$(REGDATE).sum $(TESTS_DIR); \
$(NSINSTALL) -m 664 $(PLATFORM)/$(REGDATE).htm $(TESTS_DIR); \
echo "Please now make sure your results files are copied to $(TESTS_DIR), "; \
echo "then run 'reporter specfile=$(RESULTS_DIR)/rptspec'"
endif
else
tests::
@echo Error: you didn't specify REGRESSION_SPEC in your manifest.mn file!;
endif
# Duplicate export rule for releases, with different directories
ifneq ($(EXPORTS),)
$(SOURCE_RELEASE_XP_DIR)/include::
@if test ! -d $@; then \
echo Creating $@; \
$(NSINSTALL) -D $@; \
fi
release_export:: $(SOURCE_RELEASE_XP_DIR)/include
release_export:: $(EXPORTS)
$(INSTALL) -m 444 $^ $(SOURCE_RELEASE_XP_DIR)/include
endif
################################################################################
-include $(DEPENDENCIES)
ifneq (,$(filter-out OS2 WIN%,$(OS_TARGET)))
# Can't use sed because of its 4000-char line length limit, so resort to perl
PERL_DEPENDENCIES_PROGRAM = \
open(MD, "< $(DEPENDENCIES)"); \
while (<MD>) { \
if (m@ \.*/*$< @) { \
$$found = 1; \
last; \
} \
} \
if ($$found) { \
print "Removing stale dependency $< from $(DEPENDENCIES)\n"; \
seek(MD, 0, 0); \
$$tmpname = "$(OBJDIR)/fix.md" . $$$$; \
open(TMD, "> " . $$tmpname); \
while (<MD>) { \
s@ \.*/*$< @ @; \
if (!print TMD "$$_") { \
unlink(($$tmpname)); \
exit(1); \
} \
} \
close(TMD); \
if (!rename($$tmpname, "$(DEPENDENCIES)")) { \
unlink(($$tmpname)); \
} \
} elsif ("$<" ne "$(DEPENDENCIES)") { \
print "$(MAKE): *** No rule to make target $<. Stop.\n"; \
exit(1); \
}
.DEFAULT:
@$(PERL) -e '$(PERL_DEPENDENCIES_PROGRAM)'
endif
#############################################################################
# X dependency system
#############################################################################
ifdef MKDEPENDENCIES
# For Windows, $(MKDEPENDENCIES) must be -included before including rules.mk
$(MKDEPENDENCIES)::
@$(MAKE_OBJDIR)
touch $(MKDEPENDENCIES)
chmod u+w $(MKDEPENDENCIES)
#on NT, the preceding touch command creates a read-only file !?!?!
#which is why we have to explicitly chmod it.
$(MKDEPEND) -p$(OBJDIR_NAME)/ -o'$(OBJ_SUFFIX)' -f$(MKDEPENDENCIES) \
$(NOMD_CFLAGS) $(YOPT) $(CSRCS) $(CPPSRCS) $(ASFILES)
$(MKDEPEND):: $(MKDEPEND_DIR)/*.c $(MKDEPEND_DIR)/*.h
cd $(MKDEPEND_DIR); $(MAKE)
ifdef OBJS
depend:: $(MKDEPEND) $(MKDEPENDENCIES)
else
depend::
endif
+$(LOOP_OVER_DIRS)
dependclean::
rm -f $(MKDEPENDENCIES)
+$(LOOP_OVER_DIRS)
#-include $(NSINSTALL_DIR)/$(OBJDIR)/depend.mk
else
depend::
endif
#
# HACK ALERT
#
# The only purpose of this rule is to pass Mozilla's Tinderbox depend
# builds (http://tinderbox.mozilla.org/showbuilds.cgi). Mozilla's
# Tinderbox builds NSS continuously as part of the Mozilla client.
# Because NSS's make depend is not implemented, whenever we change
# an NSS header file, the depend build does not recompile the NSS
# files that depend on the header.
#
# This rule makes all the objects depend on a dummy header file.
# Check in a change to this dummy header file to force the depend
# build to recompile everything.
#
# This rule should be removed when make depend is implemented.
#
DUMMY_DEPEND = $(CORE_DEPTH)/coreconf/coreconf.dep
$(filter $(OBJDIR)/%$(OBJ_SUFFIX),$(OBJS)): $(OBJDIR)/%$(OBJ_SUFFIX): $(DUMMY_DEPEND)
# END OF HACK
################################################################################
# Special gmake rules.
################################################################################
#
# Re-define the list of default suffixes, so gmake won't have to churn through
# hundreds of built-in suffix rules for stuff we don't need.
#
.SUFFIXES:
.SUFFIXES: .out .a .ln .o .obj .c .cc .C .cpp .y .l .s .S .h .sh .i .pl .class .java .html .asm .dep
#
# Don't delete these files if we get killed.
#
.PRECIOUS: .java $(JDK_HEADERS) $(JDK_STUBS) $(JRI_HEADERS) $(JRI_STUBS) $(JMC_HEADERS) $(JMC_STUBS) $(JNI_HEADERS)
#
# Fake targets. Always run these rules, even if a file/directory with that
# name already exists.
#
.PHONY: all all_platforms alltags boot clean clobber clobber_all export install libs program realclean release $(OBJDIR) $(DIRS)
