https://github.com/JuliaLang/julia
Tip revision: 64facb8fd791faf0a5f0768be2e2e2f320e1f2eb authored by Keno Fischer on 10 May 2014, 07:00:49 UTC
Loosen types on mmap on unix
Loosen types on mmap on unix
Tip revision: 64facb8
README.windows.md
# General Information for Windows
This file describes how to install or build Julia on Windows.
For more information about Julia, please see the [main README](https://github.com/JuliaLang/julia/blob/master/README.md)
# Binary distribution
Julia runs on Windows XP SP2 or later (including Windows Vista, Windows 7, and Windows 8). Both the 32-bit and 64-bit versions are supported. The 32-bit i686 binary will run on either 32-bit and 64-bit operating systems. The 64-bit x86_64 binary will only run on 64-bit Windows.
1. Download and install [7-Zip](http://www.7-zip.org/download.html). Install the full program, not just the command line version.
2. [Download](http://julialang.org/downloads) the latest version of Julia. Extract the binary to a reasonable destination folder, e.g. `C:\julia`.
3. Double-click the file `julia.bat` to launch Julia.
# Source distribution
## Supported build platforms
- Windows 8: supported
- Windows 7: supported (32 and 64 bits)
- Windows Vista: unknown
- Windows XP: not supported
## Compiling with MinGW/MSYS2
### MSYS2 provides a robust MSYS experience.
### The instructions in this section were tested with the latest versions of all packages specified as of 2014-02-28.
1. Install [7-Zip](http://www.7-zip.org/download.html).
2. Install [Python 2.x](http://www.python.org/download/releases). Do **not** install Python 3.
3. Install [MinGW-builds](http://sourceforge.net/projects/mingwbuilds/), a Windows port of GCC, as follows. Do **not** use the regular MinGW distribution.
1. Download the [MinGW-builds installer](http://downloads.sourceforge.net/project/mingwbuilds/mingw-builds-install/mingw-builds-install.exe).
2. Run the installer. When prompted, choose:
- Version: the most recent version (these instructions were tested with 4.8.1)
- Architecture: x32 or x64 as appropriate and desired.
- Threads: win32 (not posix)
- Exception: sjlj (for x32) or seh (for x64). Do not choose dwarf2.
- Build revision: most recent available (tested with 5)
3. Do **not** install to a directory with spaces in the name. You will have to change the default installation path, for example,
- `C:\mingw-builds\x64-4.8.1-win32-seh-rev5` for 64 bits
- `C:\mingw-builds\x32-4.8.1-win32-sjlj-rev5` for 32 bits
4. Install and configure [MSYS2](http://sourceforge.net/projects/msys2), a minimal POSIX-like environment for Windows.
1. Download the latest base [32-bit](http://sourceforge.net/projects/msys2/files/Base/i686/) or [64-bit](http://sourceforge.net/projects/msys2/files/Base/x86_64/) distribution, consistent with the architecture you chose for MinGW-builds. The archive will have a name like `msys2-base-x86_64-yyyymmdd.tar.xz` and these instructions were tested with `msys2-base-x86_64-20140216.tar.xz`.
2. Using [7-Zip](http://www.7-zip.org/download.html), extract the archive to any convenient directory.
- *N.B.* Some versions of this archive contain zero-byte files that clash with existing files. If prompted, choose **not** to overwrite existing files.
- You may need to extract the tarball in a separate step. This will create an `msys32` or `msys64` directory, according to the architecture you chose.
- Move the `msys32` or `msys64` directory into your MinGW-builds directory, which is `C:\mingw-builds` if you followed the suggestions in step 3. We will omit the "32" or "64" in the steps below and refer to this as "the msys directory".
3. Double-click `msys2_shell.bat` in the msys directory. This will initialize MSYS2. The shell will tell you to `exit` and restart the shell. For now, ignore it.
4. Update MSYS2 and install packages required to build julia, using the `pacman` package manager included in MSYS2:
```
pacman-key --init #Download keys
pacman -Syu #Update package database and full system upgrade
```
Now `exit` the MSYS2 shell and restart it, *even if you already restarted it above*. This is necessary in case the system upgrade updated the main MSYS2 libs. Reopen the MSYS2 shell and continue with:
```
pacman -S diffutils git m4 make patch tar
```
5. Configure your MSYS2 shell for convenience:
```
echo "mount C:/Python27 /python" >> ~/.bashrc
# uncomment ONE of the following two lines
#echo "mount C:/mingw-builds/x64-4.8.1-win32-seh-rev5/mingw64 /mingw" >> ~/.bashrc
#echo "mount C:/mingw-builds/x32-4.8.1-win32-sjlj-rev5/mingw32 /mingw" >> ~/.bashrc
echo "export PATH=/usr/local/bin:/usr/bin:/opt/bin:/mingw/bin:/python" >> ~/.bashrc
```
*N.B.* The `export` clobbers whatever `$PATH` is already defined. This is suggested to avoid path-masking. If you use MSYS2 for purposes other than building Julia, you may prefer to append rather than clobber.
*N.B.* All of the path-separators in the mount commands are unix-style.
6. Configuration of the toolchain is complete. Now `exit` the MSYS2 shell.
5. Build Julia and its dependencies from source.
1. Relaunch the MSYS2 shell and type
```
. ~/.bashrc # Some versions of MSYS2 do not run this automatically
```
Ignore any warnings you see from `mount` about `/mingw` and `/python` not existing.
2. Get the Julia sources and start the build:
```
git clone https://github.com/JuliaLang/julia.git
cd julia
make -j 4 # Adjust the number of cores (4) to match your build environment.
```
3. The Julia build can (as of 2014-02-28) fail after building OpenBLAS. This appears (?) to be a result of the OpenBLAS build trying to run the Microsoft Visual C++ `lib.exe` tool -- which we don't need to do -- without checking for its existence. This uncaught error kills the Julia build. If this happens, follow the instructions in the helpful error message and continue the build, *viz.*
```
cd deps/openblas-v0.2.9.rc1 # This path will depend on the version of OpenBLAS.
make install
cd ../..
make -j 4 # Adjust the number of cores (4) to match your build environment.
```
4. Some versions of PCRE (*e.g.* 8.31) will compile correctly but fail a test.
This will cause the Julia build to fail. To circumvent testing for PCRE and allow the rest
of the build to continue,
```
touch deps/pcre-8.31/checked # This path will depend on the version of PCRE.
make -j 4 # Adjust the number of cores (4) to match your build environment.
```
## Building on Windows with MinGW-builds/MSYS
### The MSYS build of `make` is fragile and may not reliably support parallel builds. Use MSYS2 as described above, if you can. If you must use MSYS, take care to notice the special comments in this section.
1. Install [7-Zip](http://www.7-zip.org/download.html).
2. Install [Python 2.x](http://www.python.org/download/releases). Do **not** install Python 3.
3. Install [MinGW-builds](http://sourceforge.net/projects/mingwbuilds/), a Windows port of GCC. as follows. Do **not** use the regular MinGW distribution.
1. Download the [MinGW-builds installer](http://downloads.sourceforge.net/project/mingwbuilds/mingw-builds-install/mingw-builds-install.exe).
2. Run the installer. When prompted, choose:
- Version: the most recent version (these instructions were tested with 4.8.1)
- Architecture: x32 or x64 as appropriate and desired.
- Threads: win32 (not posix)
- Exception: sjlj (for x32) or seh (for x64). Do not choose dwarf2.
- Build revision: most recent available (tested with 5)
3. Do **not** install to a directory with spaces in the name. You will have to change the default installation path. The following instructions will assume `C:\mingw-builds\x64-4.8.1-win32-seh-rev5\mingw64`.
4. Download and extract the [MSYS distribution for MinGW-builds](http://sourceforge.net/projects/mingwbuilds/files/external-binary-packages/) (e.g. msys+7za+wget+svn+git+mercurial+cvs-rev13.7z) to a directory *without* spaces in the name, e.g. `C:/mingw-builds/msys`.
5. Download the [MSYS distribution of make](http://sourceforge.net/projects/mingw/files/MSYS/Base/make) and use this `make.exe` to replace the one in the `mingw64\bin` subdirectory of the MinGW-builds installation.
6. Run the `msys.bat` installed in Step 4. Set up MSYS by running at the MSYS prompt:
```
mount C:/mingw-builds/x64-4.8.1-win32-seh-rev5/mingw64 /mingw
mount C:/Python27 /python
export PATH=$PATH:/mingw/bin:/python
```
Replace the directories as appropriate.
7. Download the Julia source repository and build it
```
git clone https://github.com/JuliaLang/julia.git
cd julia
make
```
*Tips:*
- The MSYS build of `make` is fragile and will occasionally corrupt the build process. You can minimize the changes of this occurring by only running `make` in serial, i.e. avoid the `-j` argument.
- When the build process fails for no apparent reason, try running `make` again.
- Sometimes, `make` will appear to hang, consuming 100% cpu but without apparent progress. If this happens, kill `make` from the Task Manager and try again.
- Expect this to take a very long time (dozens of hours is not uncommon).
- If `make` fails complaining that `./flisp/flisp` is not found, force `make` to build FemtoLisp before Julia by running `make -C src/flisp && make`.
8. Run Julia with _either_ of:
- Using `make`
```
make run-julia
```
(the full syntax is `make run-julia[-release|-debug]`)
- Using the Julia executables directly
```
usr/bin/julia
```
## Cross-compiling
If you prefer to cross-compile, the following steps should get you started.
### Ubuntu and Mac Dependencies (these steps will work for almost any linux platform)
First, you will need to ensure your system has the required dependencies. We need wine (>=1.7.5),
a system compiler, and some downloaders.
On Ubuntu:
apt-add-repository ppa:ubuntu-wine/ppa
apt-get upate
apt-get install wine1.7 subversion cvs gcc wget p7zip-full
On Mac: Install XCode, XCode command line tools, X11 (now [XQuartz](http://xquartz.macosforge.org/)),
and [MacPorts](http://www.macports.org/install.php) or [Homebrew](http://mxcl.github.io/homebrew/).
Then run ```port install wine wget``` or ```brew install wine wget```, as appropriate.
On Both:
Unfortunately, the version of gcc installed by Ubuntu is currently 4.6, which does not compile OpenBLAS correctly.
On Mac, the situation is the same: the version in MacPorts is very old and Homebrew does not have it. So first we need to get
a cross-compile version of gcc. Most binary packages appear to not include gfortran, so we will need to compile it
from source (or ask @vtjnash to send you a tgz of my build). This is typically quite a bit of work, so we will use
[this script](https://code.google.com/p/mingw-w64-dgn/) to make it easy.
1. `svn checkout http://mingw-w64-dgn.googlecode.com/svn/trunk/ mingw-w64-dgn`
2. `cd mingw-w64-dgn`
3. edit `rebuild_cross.sh` and make the following two changes:
a. uncomment `export MAKE_OPT="-j 2"`, if appropriate for your machine
b. add `fortran` to the end of `--enable-languages=c,c++,objc,obj-c++`
5. `bash update_source.sh`
4. `bash rebuild_cross.sh`
5. `mv cross ~/cross-w64`
6. `export PATH=$HOME/cross-w64/bin:$PATH` # NOTE: it is important that you remember to always do this before using make in the following steps!, you can put this line in your .profile to make it easy
Then we can essentially just repeat these steps for the 32-bit compiler, reusing some of the work:
7. `cd ..`
8. `cp -a mingw-w64-dgn mingw-w32-dgn`
9. `cd mingw-w32-dgn`
10. `rm -r cross build`
11. `bash rebuild_cross.sh 32r`
12. `mv cross ~/cross-w32`
13. `export PATH=$HOME/cross-w32/bin:$PATH` # NOTE: it is important that you remember to always do this before using make in the following steps!, you can put this line in your .profile to make it easy
Note: for systems that support rpm-based package managers, the OpenSUSE build service appears to contain a fully up-to-date versions of the necessary dependencies.
### Arch Linux Dependencies
1. Install the following packages from the official Arch repository:
`sudo pacman -S cloog gcc-ada libmpc p7zip ppl subversion zlib`
2. The rest of the prerequisites consist of the mingw-w64 packages, which are available in the AUR Arch repository. They must be installed exactly in the order they are given or else their installation will fail. The `yaourt` package manager is used for illustration purposes; you may instead follow the [Arch instructions for installing packages from AUR](https://wiki.archlinux.org/index.php/Arch_User_Repository#Installing_packages) or may use your preferred package manager. To start with, install `mingw-w64-binutils` via the command
`yaourt -S mingw-w64-binutils`
3. `yaourt -S mingw-w64-headers-svn`
4. `yaourt -S mingw-w64-headers-bootstrap`
5. `yaourt -S mingw-w64-gcc-base`
6. `yaourt -S mingw-w64-crt-svn`
7. Remove `mingw-w64-headers-bootstrap` without removing its dependent mingw-w64 installed packages by using the command
`yaourt -Rdd mingw-w64-headers-bootstrap`
8. `yaourt -S mingw-w64-winpthreads`
9. Remove `mingw-w64-gcc-base` without removing its installed mingw-w64 dependencies:
`yaourt -Rdd mingw-w64-gcc-base`
10. Complete the installation of the required `mingw-w64` packages:
`yaourt -S mingw-w64-gcc`
### Cross-building Julia
Finally, the build and install process for Julia:
1. `git clone https://github.com/JuliaLang/julia.git julia-win32`
2. `echo override XC_HOST = i686-w64-mingw32 >> Make.user`
3. `make`
4. `make win-extras` (Necessary before running `make dist`p)
5. `make dist`
6. move the julia-* directory / zip file to the target machine
If you are building for 64-bit windows, the steps are essentially the same. Just replace i686 in XC_HOST with x86_64. (note: on Mac, wine only runs in 32-bit mode)