https://github.com/cooperative-computing-lab/cctools
Tip revision: 040afbb09b29b7e421801a7bc2ace9ab7700985e authored by Benjamin Tovar on 14 May 2015, 12:10:59 UTC
Bump to 4.4.2
Bump to 4.4.2
Tip revision: 040afbb
configure
#!/bin/sh
uname -a
if [ -z "$USER" ]; then
USER=`whoami`
export USER
fi
. ./configure.tools
save_arguments $0 $@
major=4
minor=4
micro=2
# On a release, type would be changed from TRUNK to RELEASE. TRUNK is a useful
# signal that the user is not using a blessed (tagged) release.
type="RELEASE"
version="$major.$minor.$micro-$type"
# The release date is set automatically at configure time (the default).
# For a tagged release, this should be the hard-coded date of the release.
release_date=`date +%m/%d/%Y`
# Bourne shell is tricky when you use backtick command substitution backslash
# has special meaning even when surrounded by single-quotes. It is necessary to
# escape the backslash.
# Here's what we want to exec literally:
# echo "$*" | sed s/#/\\#/ | sed s/\$/$$/
# The above sed commands are to escape the output for the Makefile.
# Arguments to configure which can be printed for version/debug information.
configure_arguments=`echo "$*" | sed 's/#/\\\\#/' | sed 's/\\$/$$/'`
# Bourne shell is tricky when you use backtick command substitution backslash
# has special meaning even when surrounded by single-quotes. It is necessary to
# escape the backslash.
# Here's what we want to exec literally:
# uname -a | sed s/#/\\#/ | sed s/\$/$$/
# The above sed commands are to escape the output for the Makefile.
system_information=`uname -a | sed 's/#/\\\\#/' | sed 's/\\$/$$/'`
build_user="$USER"
build_host=`uname -n`
build_sys=`uname -s | tr \[a-z\] \[A-Z\] | awk -F_ '{print $1}'`
build_cpu=`uname -m | tr \[a-z\] \[A-Z\]`
if [ "${build_cpu}" = UNKNOWN ]
then
build_cpu=`uname -p | tr \[a-z\] \[A-Z\]`
fi
case "$build_cpu" in
I[0-9]86)
build_cpu=I386
;;
POWER\ MACINTOSH)
build_cpu=POWERPC
;;
SUN4V)
build_cpu=SPARC
;;
esac
include_package_sand="sand"
include_package_allpairs="allpairs"
include_package_wavefront="wavefront"
include_package_makeflow="makeflow"
include_package_ftplite="ftp_lite"
include_package_chirp="chirp"
include_package_resource_monitor="resource_monitor"
include_package_resource_monitor_visualizer="resource_monitor_visualizer"
include_package_weaver="weaver"
include_package_doc="doc"
work_queue_bindings=""
echo "checking for package compatibility..."
if [ -d parrot -a $build_sys = LINUX ]
then
if [ $build_cpu = I386 -o $build_cpu = X86_64 ]
then
echo "parrot IS supported on ${build_sys} ${build_cpu}"
include_package_parrot="parrot"
else
echo "parrot is NOT supported on ${build_sys} ${build_cpu}"
include_package_parrot=""
fi
else
echo "parrot is NOT supported on ${build_sys} for any cpu type"
include_package_parrot=""
fi
if [ -d resource_monitor ]
then
if [ $build_sys = LINUX -o $build_sys = DARWIN ]
then
echo "resource_monitor IS supported on ${build_sys}"
include_package_resource_monitor="resource_monitor"
else
echo "resource_monitor is NOT (yet) supported on ${build_sys}"
include_package_resource_monitor=""
fi
fi
install_path="$HOME/cctools"
readline_path="/usr"
globus_path="/usr"
fuse_path="/usr"
irods_path="/usr"
mysql_path="/usr"
perl_path="/usr"
python_path="/usr"
python3_path="/usr"
xrootd_path="/usr"
cvmfs_path="/usr"
uuid_path="/usr"
zlib_path="/usr"
swig_path="/usr"
xrootd_arch=auto
globus_flavor=auto
ccompiler=gcc
cxxcompiler=g++
ccflags="-D__EXTENSIONS__ -D_LARGEFILE64_SOURCE -D__LARGE64_FILES -Wall -Wextra"
config_readline_path=auto
config_globus_path=auto
config_fuse_path=auto
config_mysql_path=auto
config_perl_path=auto
config_python_path=auto
config_python3_path=auto
config_zlib_path=yes
config_irods_path=no
config_xrootd_path=no
config_cvmfs_path=no
config_swig_path=auto
if [ "X${GLOBUS_LOCATION}" != "X" ]
then
globus_path=${GLOBUS_LOCATION}
fi
IFS=' ='
set -- $*
while [ $# -gt 0 ]
do
case $1 in
--debug)
optdebug=1
optstrict=1
;;
--prefix)
shift
install_path=$1
;;
--strict)
optstrict=1
;;
--with-globus-path)
shift
globus_path=$1
config_globus_path=yes
;;
--globus-flavor)
shift
globus_flavor=$1
;;
--with-readline-path)
shift
readline_path=$1
config_readline_path=yes
;;
--with-fuse-path)
shift
fuse_path=$1
config_fuse_path=yes
;;
--with-irods-path)
shift
irods_path=$1
config_irods_path=yes
;;
--with-mysql-path)
shift
mysql_path=$1
config_mysql_path=yes
;;
--with-perl-path)
shift
perl_path=$1
config_perl_path=yes
;;
--with-python-path)
shift
python_path=$1
config_python_path=yes
;;
--with-python3-path)
shift
python3_path=$1
config_python3_path=yes
;;
--with-xrootd-path)
shift
xrootd_path=$1
config_xrootd_path=yes
;;
--with-cvmfs-path)
shift
cvmfs_path=$1
config_cvmfs_path=yes
;;
--with-uuid-path)
shift
uuid_path=$1
;;
--with-zlib-path)
shift
zlib_path=$1
config_zlib_path=yes
;;
--with-swig-path)
shift
swig_path=$1
config_swig_path=yes
;;
--without-system-sand)
include_package_sand=""
if [ $include_package_allpairs != "" ]
then
echo "*** skipping system 'allpairs' because of dependencies"
include_package_allpairs=""
fi
;;
--without-system-allpairs)
include_package_allpairs=""
;;
--without-system-wavefront)
include_package_wavefront=""
;;
--without-system-makeflow)
include_package_makeflow=""
;;
--without-system-ftp-lite)
include_package_ftplite=""
;;
--without-system-chirp)
include_package_chirp=""
;;
--without-system-parrot)
include_package_parrot=""
;;
--without-system-resource_monitor)
include_package_resource_monitor=""
;;
--without-system-resource_monitor_visualizer)
include_package_resource_monitor_visualizer=""
;;
--without-system-weaver)
include_package_weaver=""
;;
--without-system-doc)
include_package_doc=""
;;
--xrootd-arch)
shift
xrootd_arch=$1
;;
--with-*-path)
echo "ignoring unknown package $1"
shift
;;
--tcp-low-port)
shift
ccflags="${ccflags} -DTCP_LOW_PORT_DEFAULT=$1"
;;
--tcp-high-port)
shift
ccflags="${ccflags} -DTCP_HIGH_PORT_DEFAULT=$1"
;;
-h | -help | --h | --help)
cat <<EOF
Use: configure [options]
Where options are:
--help
--prefix <path>
--debug
--strict
--globus-flavor <flavor>
--xrootd-arch <arch>
--tcp-low-port <port>
--tcp-high-port <port>
--with-PACKAGE-path <path>
--without-system-SYSTEM
Where PACKAGE may be:
readline
fuse
globus
irods
mysql
perl
python
python3
xrootd
zlib
cvmfs
uuid
swig
And SYSTEM may be:
sand
allpairs
wavefront
makeflow
ftp-lite
chirp
parrot
resource_monitor
resource_monitor_visualizer
doc
EOF
exit 0
;;
*)
echo "Unknown argument $1"
exit 1
;;
esac
shift
done
if [ "$optstrict" = 1 ]; then
ccflags="${ccflags} -Werror"
fi
IFS=" "
export IFS
potential_packages="dttools ${include_package_makeflow} work_queue ${include_package_sand} ${include_package_allpairs} ${include_package_wavefront} ${include_package_ftplite} ${include_package_parrot} ${include_package_resource_monitor} ${include_package_resource_monitor_visualizer} ${include_package_chirp} ${include_package_weaver} ${include_package_doc}"
check_multiarch
rm -f config.mk
echo "checking for all the things I know how to build..."
for p in $potential_packages
do
if [ -d $p ]
then
echo "package $p found"
packages="${packages} $p"
if [ -d `pwd`/$p/src ]
then
internal_ccflags="${internal_ccflags} -I`pwd`/$p/src"
fi
else
echo "package $p not found (that's ok)"
fi
done
require_path ${ccompiler}
require_path ${cxxcompiler}
require_gnu_make
# Lots of warnings are enabled by default, but several are too strict
# and crop up in third-party code, so we disable those checks.
# However, not all compilers support these flags, so we check each one.
for flag in no-unused-parameter no-unknown-pragmas no-deprecated-declarations no-unused-const-variable
do
if check_compiler_flag -W$flag
then
ccflags="${ccflags} -W$flag"
fi
done
# Cygwin has some compiler oddities.
# 1 - Sloppy definitions of the ctype.h functions cause spurious warnings
# about char -> int conversions.
# 2 - All code is PIC by default, and adding the flag causes more warnings.
if [ ${build_sys} = CYGWIN ]
then
ccflags="${ccflags} -Wno-char-subscripts"
else
ccflags="${ccflags} -fPIC"
fi
#
# Currently, we rely on the linker --as-needed flag to sort out
# which dynamic libraries each executable actually needs.
# This is apparently a recent addition to gnu ld.
# A better solution would be to explicitly specify which libraries
# are needed by which executable, but this will come in a later version.
#
echon "checking if ld supports the --as-needed flag..."
if ld --help 2>&1 | grep -- --as-needed 2>&1 >/dev/null
then
echo "yes"
link_as_needed="-Xlinker --as-needed"
link_no_as_needed="-Xlinker --no-as-needed"
else
echo "no"
fi
if [ $build_sys = LINUX ]
then
ldflags="-Xlinker -Bstatic -static-libgcc -Xlinker -Bdynamic ${link_as_needed}"
elif [ $build_sys = DARWIN ]
then
ldflags=""
else
ldflags="-static-libgcc"
fi
##########################################################################
# SWITCH TO STATIC LINKING FOR UNCOMMON THIRD-PARTY PACKAGES
##########################################################################
library_search_mode=prefer_static
##########################################################################
if [ x$globus_flavor = xauto ]
then
if [ $build_cpu = X86_64 ]
then
globus_flavor=gcc64
else
globus_flavor=gcc32
fi
fi
echo "using a globus flavor of '$globus_flavor' (if this is wrong, use the --globus-flavor argument)"
if [ $config_globus_path != no ]
then
if check_file ${globus_path}/include/${globus_flavor}/globus_common.h
then
ccflags="${ccflags} -I${globus_path}/include -I${globus_path}/include/${globus_flavor} -DHAS_GLOBUS_GSS"
ldflags="${ldflags} -L${globus_path}/lib64 -L${globus_path}/lib"
for library in globus_gss_assist globus_gssapi_gsi globus_gsi_proxy_core globus_gsi_credential globus_gsi_callback globus_oldgaa globus_gsi_sysconfig globus_gsi_cert_utils globus_openssl globus_openssl_error globus_callout globus_proxy_ssl globus_common ltdl
do
library_search ${library}_${globus_flavor} ${globus_path}
done
elif check_file ${globus_path}/include/globus/globus_common.h
then
ccflags="${ccflags} -I${globus_path}/lib/globus/include -I${globus_path}/include/globus -DHAS_GLOBUS_GSS"
ldflags="${ldflags} -L${globus_path}/lib64 -L${globus_path}/lib"
for library in globus_gss_assist globus_gssapi_gsi globus_gsi_proxy_core globus_gsi_credential globus_gsi_callback globus_oldgaa globus_gsi_sysconfig globus_gsi_cert_utils globus_openssl globus_openssl_error globus_callout globus_proxy_ssl globus_common ltdl
do
library_search $library ${globus_path}
done
else
if [ $config_globus_path = yes ]
then
echo "*** Sorry, I couldn't find Globus in $globus_path"
echo "*** Check --with-globus-path and try again."
exit 1
else
echo "*** skipping globus support"
fi
fi
else
echo "*** skipping globus support"
fi
# irods 4.0 moved all its source to the iRODS subdirectory
if [ $config_irods_path != no ]
then
if library_search RodsAPIs "${irods_path}/lib/core/obj"
then
echo "detected irods 3.x installation"
ccflags="${ccflags} -DHAS_IRODS"
for d in ${irods_path}/lib/*/include ${irods_path}/server/*/include
do
ccflags="${ccflags} -I$d"
done
elif library_search RodsAPIs "${irods_path}/iRODS/lib/core/obj"
then
echo "detected irods 4.x installation"
# irods 4.x uses .so plugins which are found in /var/lib/irods.
# These require the parrot is linked with -rdynamic so that
# the plugins can refer to symbols in libRodsAPI.a in parrot.
# irods 4.x changed the API from C to C++, so we must look
# for .hpp files instead of .h files.
ccflags="${ccflags} -DHAS_IRODS -DIRODS_USES_PLUGINS -DIRODS_USES_HPP"
ldflags="-rdynamic"
echo "*** warning: irods 4.0 requires plugins installed in /var/lib"
for d in ${irods_path}/iRODS/lib/*/include ${irods_path}/iRODS/server/*/include
do
ccflags="${ccflags} -I$d"
done
# irods 4.x depends on a specific version of boost:
boost_path=`ls -d ${irods_path}/external/boost_*`
if [ ! -d ${boost_path} ]
then
echo "*** Could not find irods boost in ${irods_path}/external !"
exit 1
fi
echo "found irods boost in $boost_path"
boost_lib="${boost_path}/stage/lib"
for subtype in system thread chrono filesystem regex
do
lib=${boost_lib}/libboost_${subtype}.a
if [ -f $lib ]
then
echo "found $lib"
external_archives="${external_archives} $lib"
fi
done
jansson_path=`ls -d ${irods_path}/external/jansson-*`
if [ ! -d ${jansson_path} ]
then
echo "*** Could not find irods jansson in ${irods_path}/external !"
exit 1
fi
echo "found irods jansson in $jansson_path"
jansson_lib="${jansson_path}/src/.libs"
external_archives="${external_archives} ${jansson_lib}/libjansson.a"
elif [ $config_irods_path = yes ]
then
echo "*** Sorry, I couldn't find IRODS in $irods_path"
echo "*** Check --with-irods-path and try again."
exit 1
else
echo "*** skipping irods support"
fi
else
echo "*** skipping irods support"
fi
if [ $config_mysql_path != no ] && library_search mysqlclient ${mysql_path} mysql
then
if [ ${mysql_path} != /usr ]
then
ccflags="${ccflags} -I${mysql_path}/include"
fi
ccflags="${ccflags} -DHAS_MYSQL -DHAS_BXGRID"
else
if [ $config_mysql_path = yes ]
then
echo "*** Sorry, I couldn't find MySQL in $mysql_path"
echo "*** Check --with-mysql-path and try again."
exit 1
else
echo "*** skipping mysql support"
fi
fi
config_xrootd_success=1
if [ $config_xrootd_path != no ]
then
if [ x$xrootd_arch = xauto ]
then
if [ $build_cpu = X86_64 ]
then
xrootd_arch=x86_64_linux_26
else
xrootd_arch=i386_linux26
fi
fi
echo "using an xrootd arch of '$xrootd_arch' (if this is wrong, use the --xrootd-arch argument)"
if check_file ${xrootd_path}/include/xrootd/XrdVersion.hh
then
for library in XrdPosix XrdClient XrdSys XrdNet XrdNetUtil XrdOuc
do
if ! library_search $library ${xrootd_path} ${xrootd_arch}
then
echo "*** Couldn't find $library in ${xrootd_path}"
config_xrootd_success=0
fi
done
else
config_xrootd_success=0
fi
else
config_xrootd_success=0
fi
if [ $config_xrootd_success = 1 ]
then
ccflags="${ccflags} -I${xrootd_path}/include/xrootd -DHAS_XROOTD"
else
echo "*** skipping xrootd support"
if [ $config_xrootd_path = yes ]
then
echo "*** Sorry, I couldn't find xrootd in ${xrootd_path}"
echo "*** Check --with-xrootd-path and try again."
exit 1
fi
fi
config_cvmfs_success=1
if [ $config_cvmfs_path != no ]
then
if check_file ${cvmfs_path}/include/libcvmfs.h
then
for library in cvmfs
do
if ! library_search $library ${cvmfs_path}
then
echo "*** Couldn't find $library in ${cvmfs_path}"
config_cvmfs_success=0
fi
done
else
config_cvmfs_success=0
fi
else
config_cvmfs_success=0
fi
if [ $config_cvmfs_success = 1 ]
then
cvmfs_version=$(sed -n 's/^#define LIBCVMFS_VERSION \+\([0-9]\+\)/\1/p' ${cvmfs_path}/include/libcvmfs.h)
if [ $cvmfs_version -gt 1 ]
then
if ! library_search uuid $uuid_path
then
echo "*** Couldn't find libuuid"
echo "*** Check --with-uuid-path and try again."
exit 1
fi
fi
fi
if [ $config_cvmfs_success = 1 ]
then
ccflags="${ccflags} -I${cvmfs_path}/include -DHAS_CVMFS"
else
if [ $config_cvmfs_path = yes ]
then
echo "*** Sorry, I couldn't find cvmfs in ${cvmfs_path}"
echo "*** Check --with-cvmfs-path and try again."
exit 1
else
echo "*** skipping cvmfs support"
fi
fi
config_fuse_success=1
if [ $config_fuse_path != no ]
then
if check_file ${fuse_path}/include/fuse.h
then
for library in fuse
do
if ! library_search $library ${fuse_path}
then
echo "*** Couldn't find $library in ${fuse_path}"
config_fuse_success=0
fi
done
else
config_fuse_success=0
fi
else
config_fuse_success=0
fi
if [ $config_fuse_success = 1 ]
then
ccflags="${ccflags} -I${fuse_path}/include -DHAS_FUSE"
else
if [ $config_fuse_path = yes ]
then
echo "*** Sorry, I couldn't find Fuse in $fuse_path"
echo "*** Check --with-fuse-path and try again."
exit 1
else
echo "*** skipping fuse support"
fi
fi
##########################################################################
# SWITCH BACK TO DYNAMIC LINKING FOR COMMON SYSTEM LIBRARIES
##########################################################################
library_search_mode=prefer_dynamic
##########################################################################
if [ $config_readline_path != no ] && library_search readline ${readline_path}
then
if [ ${readline_path} != /usr ]
then
ccflags="${ccflags} -I${readline_path}/include"
fi
ccflags="${ccflags} -DHAS_LIBREADLINE"
# We rely on the --as-needed flag to figure out what dynamic
# libraries are actually used by each executable.
# However, libreadline doesn't properly specify a dependency
# on ncurses, termcap, and history, so we must force them to link.
if [ $build_sys = LINUX ]
then
# Remove the -lreadline that was added by "library_search readline" above
ldflags=`echo $ldflags | sed "s/-lreadline//"`
# Put the readline flags in a separate variable to be used only where needed.
cctools_readline_ldflags="-lreadline ${link_no_as_needed} -lncurses -lhistory ${link_as_needed}"
else
library_search ncurses ${readline_path}
library_search termcap ${readline_path}
library_search history ${readline_path}
fi
else
echo "*** skipping readline..."
fi
if [ $config_perl_path != no ]
then
if check_file ${perl_path}/bin/perl
then
perl=${perl_path}/bin/perl
else
perl=0
fi
if [ $perl != 0 ]
then
perl_version=`${perl} -e 'printf "%vd\n",$^V;'`
if [ $? = 0 ]
then
echo "perl version is ${perl_version}"
else
perl=0
fi
fi
if [ $perl != 0 ]
then
perl_ccflags=`${perl} -MExtUtils::Embed -e ccopts`
perl_ldflags=`${perl} -MExtUtils::Embed -e ldopts`
if [ $? = 0 ]
then
# On OSX, the ExtUtils::Embed options contain options
# to generate triple-fat binaries, which fails when
# we attempt to bring in our thin binaries.
# To avoid this problem, remove all of the -arch XXX
# arguments, so that the compiler produces the default,
# which will be compatible with the other objects we compile.
if [ ${build_sys} = DARWIN ]
then
perl_ccflags=`echo ${perl_ccflags} | sed 's/-arch [^ ]* *//g'`
perl_ldflags=`echo ${perl_ldflags} | sed 's/-arch [^ ]* *//g'`
fi
work_queue_bindings="$work_queue_bindings perl"
else
perl=0
fi
fi
if [ $perl = 0 ]
then
if [ $config_perl_path = yes ]
then
echo "*** Sorry, I couldn't find the perl libraries in $perl_path"
echo "*** Check --with-perl-path and try again."
exit 1
else
echo "*** skipping perl support"
fi
fi
fi
if [ $config_python_path != no ]
then
if [ -n "$PYTHON" ] && check_file ${PYTHON}
then
python=${PYTHON}
elif check_file ${python_path}/bin/python2
then
python=${python_path}/bin/python2
elif check_file ${python_path}/bin/python
then
python=${python_path}/bin/python
else
python=0
fi
if [ $python != 0 ]
then
python_version=`${python} -V 2>&1 | cut -d " " -f 2`
echo "python version is ${python_version}"
python_major_version=`echo ${python_version} | cut -d . -f 1`
python_minor_version=`echo ${python_version} | cut -d . -f 2 | cut -d . -f 1,2`
if [ "$python_major_version" -eq 2 -a "$python_minor_version" -ge 4 ]
then
if check_file ${python_path}/include/python2.$python_minor_version/Python.h
then
echo "found python development libraries"
python_ccflags_file=`mktemp tmp.XXXXXX`
python_ldflags_file=`mktemp tmp.XXXXXX`
env HOME=/var/empty ${python} > $python_ccflags_file <<EOF
from distutils import sysconfig
flags = ['-I' + sysconfig.get_python_inc(),
'-I' + sysconfig.get_python_inc(plat_specific=True)]
syscfgflags = sysconfig.get_config_var('CFLAGS')
if not syscfgflags is None:
flags.extend(syscfgflags.split())
print ' '.join(flags)
EOF
env HOME=/var/empty ${python} > $python_ldflags_file <<EOF
from distutils import sysconfig
libs = sysconfig.get_config_var('LIBS').split() + sysconfig.get_config_var('SYSLIBS').split()
if not sysconfig.get_config_var('Py_ENABLE_SHARED'):
libs.insert(0, '-L' + sysconfig.get_config_var('LIBPL'))
print ' '.join(libs)
EOF
python_ccflags=`cat $python_ccflags_file`
python_ldflags=`cat $python_ldflags_file`
rm $python_ccflags_file
rm $python_ldflags_file
# On OSX, the ExtUtils::Embed options contain options
# to generate triple-fat binaries, which fails when
# we attempt to bring in our thin binaries.
# To avoid this problem, remove all of the -arch XXX
# arguments, so that the compiler produces the default,
# which will be compatible with the other objects we compile.
if [ ${build_sys} = DARWIN ]
then
python_ccflags=`echo ${python_ccflags} | sed 's/-arch [^ ]* *//g'`
python_ldflags=`echo ${python_ldflags} | sed 's/-arch [^ ]* *//g'`
fi
if [ $build_sys = DARWIN ]
then
python_ldflags="$python_ldflags -undefined dynamic_lookup"
fi
work_queue_bindings="$work_queue_bindings python"
else
python=0
fi
else
echo "*** Sorry, we require Python >= 2.4"
python=0
fi
fi
if [ $python = 0 ]
then
if [ $config_python_path = yes ]
then
echo "*** Sorry, I couldn't find the Python >= 2.4 libraries in $python_path"
echo "*** Check --with-python-path and try again."
exit 1
else
echo "*** skipping python support"
fi
fi
fi
# If python is not found, then leave out weaver.
if [ $python != 0 -a $python_major_version = 2 -a $python_minor_version -ge 6 ]
then
echo "python version is suitable for weaver"
else
echo "weaver requires python >= 2.6"
packages=`echo ${packages} | sed 's/weaver//g'`
fi
if [ $config_python3_path != no ]
then
if [ -n "$PYTHON3" ] && check_file ${PYTHON3}
then
python3=${PYTHON3}
elif check_file ${python3_path}/bin/python3
then
python3=${python3_path}/bin/python3
elif check_file ${python3_path}/bin/python
then
python3=${python3_path}/bin/python
else
python3=0
fi
if check_file ${python3_path}/bin/2to3
then
python3_2to3=${python3_path}/bin/2to3
else
python3=0
fi
if [ $python3 != 0 ]
then
python3_version=`${python3} -V 2>&1 | cut -d " " -f 2`
echo "python3 version is ${python3_version}"
python3_major_version=`echo ${python3_version} | cut -d . -f 1`
python3_minor_version=`echo ${python3_version} | cut -d . -f 2 | cut -d . -f 1,2`
if [ "$python3_major_version" -eq 3 ]
then
python3_include=`${python3} -c 'from distutils import sysconfig; print(sysconfig.get_python_inc())'`
if check_file ${python3_include}/Python.h && check_file ${python3}-config
then
echo "found python3 development libraries"
python3_ccflags=`${python3}-config --cflags`
python3_ldflags=`${python3}-config --ldflags`
# On OSX, the ExtUtils::Embed options contain options
# to generate triple-fat binaries, which fails when
# we attempt to bring in our thin binaries.
# To avoid this problem, remove all of the -arch XXX
# arguments, so that the compiler produces the default,
# which will be compatible with the other objects we compile.
if [ ${build_sys} = DARWIN ]
then
python3_ccflags=`echo ${python3_ccflags} | sed 's/-arch [^ ]* *//g'`
python3_ldflags=`echo ${python3_ldflags} | sed 's/-arch [^ ]* *//g'`
fi
if [ $build_sys = DARWIN ]
then
python3_ldflags="$python3_ldflags -undefined dynamic_lookup"
fi
work_queue_bindings="$work_queue_bindings python3"
else
python3=0
fi
else
echo "*** Sorry, we require Python3 >= 3.0"
python3=0
fi
fi
if [ $python3 = 0 ]
then
if [ $config_python3_path = yes ]
then
echo "*** Sorry, I couldn't find the Python3 >= 3.0 libraries in $python3_path"
echo "*** Check --with-python3-path and try again."
exit 1
else
echo "*** skipping python3 support"
fi
fi
fi
found_swig=no
if [ $config_swig_path != no ]
then
swig=""
if check_file ${swig_path}/bin/swig
then
swig=${swig_path}/bin/swig
else
if check_path swig
then
swig=`which swig`
else
echo "*** skipping swig bindings for work queue"
fi
fi
if [ -n "$swig" ]
then
swig_version=`${swig} -version | grep -i version | awk '{print $3}'`
if [ "$python" != 1 -a ! \( "$python_major_version" -eq 2 -a "$python_minor_version" -eq 4 \) -a `format_version $swig_version` -eq `format_version 1.3.29` ]
then
echo "*** Sorry, Swig 1.3.29 does not work with Python $python_version."
echo "*** skipping swig bindings for work queue"
elif [ "$python3" != 0 -a `format_version $swig_version` -lt `format_version 2.0.4` ]
then
# Python 3 requires Swig version >= 2.0.4; cf.
# http://sourceforge.net/p/swig/bugs/1104/ and
# http://sourceforge.net/p/swig/news/?page=1
echo "*** Sorry, Swig $swig_version does not work with Python 3 version $python3_version."
echo "*** Specifically, Swig >= 2.0.4 is needed for Python 3 support."
echo "*** skipping swig bindings for work queue"
elif [ `format_version $swig_version` -ge `format_version 1.3.29` ]
then
found_swig=yes
else
echo "*** Sorry, I need swig >= 1.3.29"
echo "*** skipping swig bindings for work queue"
fi
fi
else
if [ $config_swig_path = yes ]
then
echo "*** Sorry, I couldn't find swig in $swig_path"
echo "*** Check --with=swig-path and try again."
exit 1
else
echo "*** skipping swig bindings for work queue"
fi
fi
if [ $found_swig != yes ]
then
work_queue_bindings=""
fi
linker="gcc"
library_search ssl /usr
library_search crypto /usr
library_search resolv /usr
library_search socket /usr
library_search nsl /usr
# Finally, add in standard system libraries found everywhere
if [ $build_sys != DARWIN ]
then
external_dynlibs="${external_dynlibs} -lrt"
fi
if [ $build_sys != FREEBSD ]
then
external_dynlibs="${external_dynlibs} -ldl"
fi
if library_search z ${zlib_path}
then
if [ X${zlib_path} != X/usr ]
then
ccflags="${ccflags} -I${zlib_path}/include"
ldflags="${ldflags} -L${zlib_path}/lib"
fi
else
echo "*** Sorry, I couldn't find zlib in $zlib_path"
echo "*** Check --with-zlib-path and try again."
exit 1
fi
if [ ${build_sys} != CYGWIN ]
then
external_dynlibs="${external_dynlibs} -lstdc++ -lpthread -lz -lc -lm"
else
external_dynlibs="${external_dynlibs} -lstdc++ -lpthread -lz -lm"
fi
if [ $build_sys = DARWIN ]
then
cctools_dynamic_suffix=dylib
cctools_dynamic_flag=-dynamiclib
else
cctools_dynamic_suffix=so
cctools_dynamic_flag=-shared
fi
# sqlite3 uses define "HAVE_*"
optional_function isnan /usr/include/math.h HAS_ISNAN HAVE_ISNAN SQLITE_HAVE_ISNAN
optional_function pread /usr/include/unistd.h HAS_PREAD
optional_function pwrite /usr/include/unistd.h HAS_PWRITE
optional_function strsignal /usr/include/string.h HAS_STRSIGNAL
optional_function usleep /usr/include/unistd.h HAS_USLEEP HAVE_USLEEP
optional_function utime /usr/include/utime.h HAS_UTIME HAVE_UTIME
# sqlite3 uses define "HAVE_*"
optional_include attr/xattr.h HAS_ATTR_XATTR_H
optional_include fts.h HAS_FTS_H
optional_include inttypes.h HAS_INTTYPES_H HAVE_INTTYPES_H
optional_include stdint.h HAS_STDINT_H HAVE_STDINT_H
optional_include sys/statfs.h HAS_SYS_STATFS_H
optional_include sys/statvfs.h HAS_SYS_STATVFS_H
optional_include sys/xattr.h HAS_SYS_XATTR_H
optional_include syslog.h HAS_SYSLOG_H
#if optional_library_function systemd/sd-journal.h sd_journal_print systemd HAS_SYSTEMD_JOURNAL_H; then
# external_dynlibs="${external_dynlibs} -lsystemd"
#fi
cctools_doctargets=
if check_path doxygen
then
cctools_doctargets="${cctools_doctargets} apipages"
else
echo "*** not building API documentation"
fi
if check_path m4
then
cctools_doctargets="${cctools_doctargets} htmlpages"
if check_path nroff
then
cctools_doctargets="${cctools_doctargets} manpages"
else
echo "*** not building man pages"
fi
else
echo "*** not building html or man pages"
fi
# We always compile with debugging enabled,
# however on Solaris, the -g option results in a different
# debugging format that causes linking errors in getopt code.
if [ $build_sys = SUNOS ]
then
debug_flag="-gstabs+"
else
debug_flag="-g"
fi
ccflags="${ccflags} -DINSTALL_PATH='\"${install_path}\"' $debug_flag -D_REENTRANT -D_GNU_SOURCE -DBUILD_USER='\"$build_user\"' -DBUILD_HOST='\"$build_host\"' -DCCTOOLS_VERSION_MAJOR=$major -DCCTOOLS_VERSION_MINOR=$minor -DCCTOOLS_VERSION_MICRO='\"$micro\"' -DCCTOOLS_VERSION='\"$version\"' -DCCTOOLS_RELEASE_DATE='\"$release_date\"' -DCCTOOLS_CONFIGURE_ARGUMENTS='\"$configure_arguments\"' -DCCTOOLS_SYSTEM_INFORMATION='\"$system_information\"' -DCCTOOLS_OPSYS_${build_sys} -DCCTOOLS_CPU_${build_cpu}"
ldflags="${ldflags} ${debug_flag}"
if [ X$include_package_parrot = "Xparrot" ]
then
cat <<EOF > libparrot.test.c
int main() { return 0; }
EOF
echon "testing creation of 64-bit libparrot_helper.so..."
$ccompiler $internal_ccflags -m64 libparrot.test.c -o libparrot.test > /dev/null 2>&1
if [ $? = 0 ]
then
build_lib64parrot_helper="yes"
else
build_lib64parrot_helper="no"
fi
echo $build_lib64parrot_helper
echon "testing creation of 32-bit libparrot_helper.so..."
$ccompiler $internal_ccflags -m32 libparrot.test.c -o libparrot.test > /dev/null 2>&1
if [ $? = 0 ]
then
build_lib32parrot_helper="yes"
else
build_lib32parrot_helper="no"
fi
echo $build_lib32parrot_helper
rm -f libparrot.test.c libparrot.test
fi
echo "Creating config.mk..."
if [ "$optdebug" = 1 ]; then
CCTOOLS_CC="${ccompiler}"
CCTOOLS_CXX="${cxxcompiler}"
CCTOOLS_LD="${linker}"
else
CCTOOLS_CC='@echo COMPILE $@;'"${ccompiler}"
CCTOOLS_CXX='@echo COMPILE $@;'"${cxxcompiler}"
CCTOOLS_LD='@echo LINK $@;'"${linker}"
fi
cat <<EOF >>config.mk
# Generated at `date` by $USER@`uname -n`
CCTOOLS_INSTALL_DIR=${install_path}
CCTOOLS_PACKAGES=${packages}
CCTOOLS_CC=${CCTOOLS_CC}
CCTOOLS_BASE_CCFLAGS=${ccflags}
CCTOOLS_INTERNAL_CCFLAGS=${internal_ccflags} \${CCTOOLS_BASE_CCFLAGS}
CCTOOLS_CCFLAGS=-I\${CCTOOLS_INSTALL_DIR}/include/cctools \${CCTOOLS_BASE_CCFLAGS}
CCTOOLS_CXX=${CCTOOLS_CXX}
CCTOOLS_BASE_CXXFLAGS=${ccflags}
CCTOOLS_INTERNAL_CXXFLAGS=${internal_ccflags} \${CCTOOLS_BASE_CXXFLAGS}
CCTOOLS_CXXFLAGS=-I\${CCTOOLS_INSTALL_DIR}/include/cctools \${CCTOOLS_BASE_CXXFLAGS}
CCTOOLS_LD = ${CCTOOLS_LD}
CCTOOLS_BASE_LDFLAGS = ${ldflags}
CCTOOLS_INTERNAL_LDFLAGS = \$(CCTOOLS_BASE_LDFLAGS) ${internal_ldflags}
CCTOOLS_EXTERNAL_LINKAGE = ${external_archives} ${external_dynlibs}
CCTOOLS_LDFLAGS = -L\$(CCTOOLS_INSTALL_DIR)/lib \$(CCTOOLS_BASE_LDFLAGS)
CCTOOLS_READLINE_LDFLAGS=${cctools_readline_ldflags}
CCTOOLS_DYNAMIC_SUFFIX=${cctools_dynamic_suffix}
CCTOOLS_DYNAMIC_FLAG=${cctools_dynamic_flag}
CC=\$(CCTOOLS_CC)
CCFLAGS=\$(CCTOOLS_CCFLAGS)
LD=\$(CCTOOLS_LD)
LDFLAGS=\$(CCTOOLS_LDFLAGS)
CXX=\$(CCTOOLS_CXX)
CXXFLAGS=\$(CCTOOLS_CXXFLAGS)
CCTOOLS_AR=ar
CCTOOLS_SWIG=${swig}
CCTOOLS_PERL=${perl}
CCTOOLS_PERL_CCFLAGS=${perl_ccflags}
CCTOOLS_PERL_LDFLAGS=${perl_ldflags}
CCTOOLS_PERL_VERSION=${perl_version}
CCTOOLS_PYTHON=${python}
CCTOOLS_PYTHON_CCFLAGS=${python_ccflags}
CCTOOLS_PYTHON_LDFLAGS=${python_ldflags}
CCTOOLS_PYTHON_VERSION=${python_major_version}.${python_minor_version}
CCTOOLS_PYTHON3=${python3}
CCTOOLS_PYTHON3_CCFLAGS=${python3_ccflags}
CCTOOLS_PYTHON3_LDFLAGS=${python3_ldflags}
CCTOOLS_PYTHON3_VERSION=${python3_major_version}.${python3_minor_version}
CCTOOLS_PYTHON3_2TO3=${python3_2to3}
CCTOOLS_WORK_QUEUE_BINDINGS=${work_queue_bindings}
CCTOOLS_DOCTARGETS=${cctools_doctargets}
CCTOOLS_M4_ARGS=-DCCTOOLS_VERSION=${major}.${minor}.${micro} -DCCTOOLS_RELEASE_DATE=${release_date}
CCTOOLS_BUILD_LIB64PARROT_HELPER=${build_lib64parrot_helper}
CCTOOLS_BUILD_LIB32PARROT_HELPER=${build_lib32parrot_helper}
CCTOOLS_VERSION=${version}
CCTOOLS_RELEASEDATE=${release_date}
EOF
echo ""
echo "To re-configure, type './configure.rerun'"
echo "To build, type '${MAKE}'"
echo "To build and install, type '${MAKE} install'"
echo ""
exit 0
# vim: set noexpandtab tabstop=4: