https://bitbucket.org/multicoreware/x265
Tip revision: 75efcf193871ba73760f85c300298492cebc0933 authored by Aruna Matheswaran on 24 September 2019, 12:20:42 UTC
release: Release notes for v3.2
release: Release notes for v3.2
Tip revision: 75efcf1
x265.h
/*****************************************************************************
* Copyright (C) 2013-2017 MulticoreWare, Inc
*
* Authors: Steve Borho <steve@borho.org>
* Min Chen <chenm003@163.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02111, USA.
*
* This program is also available under a commercial proprietary license.
* For more information, contact us at license @ x265.com.
*****************************************************************************/
#ifndef X265_H
#define X265_H
#include <stdint.h>
#include <stdio.h>
#include "x265_config.h"
#ifdef __cplusplus
extern "C" {
#endif
#if _MSC_VER
#pragma warning(disable: 4201) // non-standard extension used (nameless struct/union)
#endif
/* x265_encoder:
* opaque handler for encoder */
typedef struct x265_encoder x265_encoder;
/* x265_picyuv:
* opaque handler for PicYuv */
typedef struct x265_picyuv x265_picyuv;
/* Application developers planning to link against a shared library version of
* libx265 from a Microsoft Visual Studio or similar development environment
* will need to define X265_API_IMPORTS before including this header.
* This clause does not apply to MinGW, similar development environments, or non
* Windows platforms. */
#ifdef X265_API_IMPORTS
#define X265_API __declspec(dllimport)
#else
#define X265_API
#endif
typedef enum
{
NAL_UNIT_CODED_SLICE_TRAIL_N = 0,
NAL_UNIT_CODED_SLICE_TRAIL_R,
NAL_UNIT_CODED_SLICE_TSA_N,
NAL_UNIT_CODED_SLICE_TLA_R,
NAL_UNIT_CODED_SLICE_STSA_N,
NAL_UNIT_CODED_SLICE_STSA_R,
NAL_UNIT_CODED_SLICE_RADL_N,
NAL_UNIT_CODED_SLICE_RADL_R,
NAL_UNIT_CODED_SLICE_RASL_N,
NAL_UNIT_CODED_SLICE_RASL_R,
NAL_UNIT_CODED_SLICE_BLA_W_LP = 16,
NAL_UNIT_CODED_SLICE_BLA_W_RADL,
NAL_UNIT_CODED_SLICE_BLA_N_LP,
NAL_UNIT_CODED_SLICE_IDR_W_RADL,
NAL_UNIT_CODED_SLICE_IDR_N_LP,
NAL_UNIT_CODED_SLICE_CRA,
NAL_UNIT_VPS = 32,
NAL_UNIT_SPS,
NAL_UNIT_PPS,
NAL_UNIT_ACCESS_UNIT_DELIMITER,
NAL_UNIT_EOS,
NAL_UNIT_EOB,
NAL_UNIT_FILLER_DATA,
NAL_UNIT_PREFIX_SEI,
NAL_UNIT_SUFFIX_SEI,
NAL_UNIT_UNSPECIFIED = 62,
NAL_UNIT_INVALID = 64,
} NalUnitType;
/* The data within the payload is already NAL-encapsulated; the type is merely
* in the struct for easy access by the calling application. All data returned
* in an x265_nal, including the data in payload, is no longer valid after the
* next call to x265_encoder_encode. Thus it must be used or copied before
* calling x265_encoder_encode again. */
typedef struct x265_nal
{
uint32_t type; /* NalUnitType */
uint32_t sizeBytes; /* size in bytes */
uint8_t* payload;
} x265_nal;
#define X265_LOOKAHEAD_MAX 250
typedef struct x265_lookahead_data
{
int64_t plannedSatd[X265_LOOKAHEAD_MAX + 1];
uint32_t *vbvCost;
uint32_t *intraVbvCost;
uint32_t *satdForVbv;
uint32_t *intraSatdForVbv;
int keyframe;
int lastMiniGopBFrame;
int plannedType[X265_LOOKAHEAD_MAX + 1];
int64_t dts;
int64_t reorderedPts;
} x265_lookahead_data;
typedef struct x265_analysis_validate
{
int maxNumReferences;
int analysisReuseLevel;
int sourceWidth;
int sourceHeight;
int keyframeMax;
int keyframeMin;
int openGOP;
int bframes;
int bPyramid;
int maxCUSize;
int minCUSize;
int intraRefresh;
int lookaheadDepth;
int chunkStart;
int chunkEnd;
int cuTree;
int ctuDistortionRefine;
}x265_analysis_validate;
/* Stores intra analysis data for a single frame. This struct needs better packing */
typedef struct x265_analysis_intra_data
{
uint8_t* depth;
uint8_t* modes;
char* partSizes;
uint8_t* chromaModes;
int8_t* cuQPOff;
}x265_analysis_intra_data;
typedef struct x265_analysis_MV
{
union{
struct { int32_t x, y; };
int64_t word;
};
}x265_analysis_MV;
/* Stores inter analysis data for a single frame */
typedef struct x265_analysis_inter_data
{
int32_t* ref;
uint8_t* depth;
uint8_t* modes;
uint8_t* partSize;
uint8_t* mergeFlag;
uint8_t* interDir;
uint8_t* mvpIdx[2];
int8_t* refIdx[2];
x265_analysis_MV* mv[2];
int64_t* sadCost;
int8_t* cuQPOff;
}x265_analysis_inter_data;
typedef struct x265_weight_param
{
uint32_t log2WeightDenom;
int inputWeight;
int inputOffset;
int wtPresent;
}x265_weight_param;
#if X265_DEPTH < 10
typedef uint32_t sse_t;
#else
typedef uint64_t sse_t;
#endif
#define CTU_DISTORTION_OFF 0
#define CTU_DISTORTION_INTERNAL 1
#define CTU_DISTORTION_EXTERNAL 2
typedef struct x265_analysis_distortion_data
{
sse_t* ctuDistortion;
double* scaledDistortion;
double averageDistortion;
double sdDistortion;
uint32_t highDistortionCtuCount;
uint32_t lowDistortionCtuCount;
double* offset;
double* threshold;
}x265_analysis_distortion_data;
/* Stores all analysis data for a single frame */
typedef struct x265_analysis_data
{
int64_t satdCost;
uint32_t frameRecordSize;
uint32_t poc;
uint32_t sliceType;
uint32_t numCUsInFrame;
uint32_t numPartitions;
uint32_t depthBytes;
int bScenecut;
x265_weight_param* wt;
x265_analysis_inter_data* interData;
x265_analysis_intra_data* intraData;
uint32_t numCuInHeight;
x265_lookahead_data lookahead;
uint8_t* modeFlag[2];
x265_analysis_validate saveParam;
x265_analysis_distortion_data* distortionData;
} x265_analysis_data;
/* cu statistics */
typedef struct x265_cu_stats
{
double percentSkipCu[4]; // Percentage of skip cu in all depths
double percentMergeCu[4]; // Percentage of merge cu in all depths
double percentIntraDistribution[4][3]; // Percentage of DC, Planar, Angular intra modes in all depths
double percentInterDistribution[4][3]; // Percentage of 2Nx2N inter, rect and amp in all depths
double percentIntraNxN; // Percentage of 4x4 cu
/* All the above values will add up to 100%. */
} x265_cu_stats;
/* pu statistics */
typedef struct x265_pu_stats
{
double percentSkipPu[4]; // Percentage of skip cu in all depths
double percentIntraPu[4]; // Percentage of intra modes in all depths
double percentAmpPu[4]; // Percentage of amp modes in all depths
double percentInterPu[4][3]; // Percentage of inter 2nx2n, 2nxn and nx2n in all depths
double percentMergePu[4][3]; // Percentage of merge 2nx2n, 2nxn and nx2n in all depth
double percentNxN;
/* All the above values will add up to 100%. */
} x265_pu_stats;
/* Frame level statistics */
typedef struct x265_frame_stats
{
double qp;
double rateFactor;
double psnrY;
double psnrU;
double psnrV;
double psnr;
double ssim;
double decideWaitTime;
double row0WaitTime;
double wallTime;
double refWaitWallTime;
double totalCTUTime;
double stallTime;
double avgWPP;
double avgLumaDistortion;
double avgChromaDistortion;
double avgPsyEnergy;
double avgResEnergy;
double avgLumaLevel;
double bufferFill;
uint64_t bits;
int encoderOrder;
int poc;
int countRowBlocks;
int list0POC[16];
int list1POC[16];
uint16_t maxLumaLevel;
uint16_t minLumaLevel;
uint16_t maxChromaULevel;
uint16_t minChromaULevel;
double avgChromaULevel;
uint16_t maxChromaVLevel;
uint16_t minChromaVLevel;
double avgChromaVLevel;
char sliceType;
int bScenecut;
double ipCostRatio;
int frameLatency;
x265_cu_stats cuStats;
x265_pu_stats puStats;
double totalFrameTime;
double vmafFrameScore;
double bufferFillFinal;
} x265_frame_stats;
typedef struct x265_ctu_info_t
{
int32_t ctuAddress;
int32_t ctuPartitions[64];
void* ctuInfo;
} x265_ctu_info_t;
typedef enum
{
NO_CTU_INFO = 0,
HAS_CTU_INFO = 1,
CTU_INFO_CHANGE = 2,
}CTUInfo;
typedef enum
{
NO_INFO = 0,
AVC_INFO = 1,
HEVC_INFO = 2,
}AnalysisRefineType;
/* Arbitrary User SEI
* Payload size is in bytes and the payload pointer must be non-NULL.
* Payload types and syntax can be found in Annex D of the H.265 Specification.
* SEI Payload Alignment bits as described in Annex D must be included at the
* end of the payload if needed. The payload should not be NAL-encapsulated.
* Payloads are written in the order of input */
typedef enum
{
BUFFERING_PERIOD = 0,
PICTURE_TIMING = 1,
PAN_SCAN_RECT = 2,
FILLER_PAYLOAD = 3,
USER_DATA_REGISTERED_ITU_T_T35 = 4,
USER_DATA_UNREGISTERED = 5,
RECOVERY_POINT = 6,
SCENE_INFO = 9,
FULL_FRAME_SNAPSHOT = 15,
PROGRESSIVE_REFINEMENT_SEGMENT_START = 16,
PROGRESSIVE_REFINEMENT_SEGMENT_END = 17,
FILM_GRAIN_CHARACTERISTICS = 19,
POST_FILTER_HINT = 22,
TONE_MAPPING_INFO = 23,
FRAME_PACKING = 45,
DISPLAY_ORIENTATION = 47,
SOP_DESCRIPTION = 128,
ACTIVE_PARAMETER_SETS = 129,
DECODING_UNIT_INFO = 130,
TEMPORAL_LEVEL0_INDEX = 131,
DECODED_PICTURE_HASH = 132,
SCALABLE_NESTING = 133,
REGION_REFRESH_INFO = 134,
MASTERING_DISPLAY_INFO = 137,
CONTENT_LIGHT_LEVEL_INFO = 144,
ALTERNATIVE_TRANSFER_CHARACTERISTICS = 147,
} SEIPayloadType;
typedef struct x265_sei_payload
{
int payloadSize;
SEIPayloadType payloadType;
uint8_t* payload;
} x265_sei_payload;
typedef struct x265_sei
{
int numPayloads;
x265_sei_payload *payloads;
} x265_sei;
typedef struct x265_dolby_vision_rpu
{
int payloadSize;
uint8_t* payload;
}x265_dolby_vision_rpu;
/* Used to pass pictures into the encoder, and to get picture data back out of
* the encoder. The input and output semantics are different */
typedef struct x265_picture
{
/* presentation time stamp: user-specified, returned on output */
int64_t pts;
/* display time stamp: ignored on input, copied from reordered pts. Returned
* on output */
int64_t dts;
/* force quantizer for != X265_QP_AUTO */
/* The value provided on input is returned with the same picture (POC) on
* output */
void* userData;
/* Must be specified on input pictures, the number of planes is determined
* by the colorSpace value */
void* planes[3];
/* Stride is the number of bytes between row starts */
int stride[3];
/* Must be specified on input pictures. x265_picture_init() will set it to
* the encoder's internal bit depth, but this field must describe the depth
* of the input pictures. Must be between 8 and 16. Values larger than 8
* imply 16bits per input sample. If input bit depth is larger than the
* internal bit depth, the encoder will down-shift pixels. Input samples
* larger than 8bits will be masked to internal bit depth. On output the
* bitDepth will be the internal encoder bit depth */
int bitDepth;
/* Must be specified on input pictures: X265_TYPE_AUTO or other.
* x265_picture_init() sets this to auto, returned on output */
int sliceType;
/* Ignored on input, set to picture count, returned on output */
int poc;
/* Must be specified on input pictures: X265_CSP_I420 or other. It must
* match the internal color space of the encoder. x265_picture_init() will
* initialize this value to the internal color space */
int colorSpace;
/* Force the slice base QP for this picture within the encoder. Set to 0
* to allow the encoder to determine base QP */
int forceqp;
/* If param.analysisLoad and param.analysisSave are disabled, this field is
* ignored on input and output. Else the user must call x265_alloc_analysis_data()
* to allocate analysis buffers for every picture passed to the encoder.
*
* On input when param.analysisLoad is enabled and analysisData
* member pointers are valid, the encoder will use the data stored here to
* reduce encoder work.
*
* On output when param.analysisSave is enabled and analysisData
* member pointers are valid, the encoder will write output analysis into
* this data structure */
x265_analysis_data analysisData;
/* An array of quantizer offsets to be applied to this image during encoding.
* These are added on top of the decisions made by rateControl.
* Adaptive quantization must be enabled to use this feature. These quantizer
* offsets should be given for each 16x16 block (8x8 block, when qg-size is 8).
* Behavior if quant offsets differ between encoding passes is undefined. */
float *quantOffsets;
/* Frame level statistics */
x265_frame_stats frameData;
/* User defined SEI */
x265_sei userSEI;
/* Ratecontrol statistics for collecting the ratecontrol information.
* It is not used for collecting the last pass ratecontrol data in
* multi pass ratecontrol mode. */
void* rcData;
uint64_t framesize;
int height;
// pts is reordered in the order of encoding.
int64_t reorderedPts;
//Dolby Vision RPU metadata
x265_dolby_vision_rpu rpu;
int fieldNum;
} x265_picture;
typedef enum
{
X265_DIA_SEARCH,
X265_HEX_SEARCH,
X265_UMH_SEARCH,
X265_STAR_SEARCH,
X265_SEA,
X265_FULL_SEARCH
} X265_ME_METHODS;
/* CPU flags */
/* x86 */
#define X265_CPU_MMX (1 << 0)
#define X265_CPU_MMX2 (1 << 1) /* MMX2 aka MMXEXT aka ISSE */
#define X265_CPU_MMXEXT X265_CPU_MMX2
#define X265_CPU_SSE (1 << 2)
#define X265_CPU_SSE2 (1 << 3)
#define X265_CPU_LZCNT (1 << 4)
#define X265_CPU_SSE3 (1 << 5)
#define X265_CPU_SSSE3 (1 << 6)
#define X265_CPU_SSE4 (1 << 7) /* SSE4.1 */
#define X265_CPU_SSE42 (1 << 8) /* SSE4.2 */
#define X265_CPU_AVX (1 << 9) /* Requires OS support even if YMM registers aren't used. */
#define X265_CPU_XOP (1 << 10) /* AMD XOP */
#define X265_CPU_FMA4 (1 << 11) /* AMD FMA4 */
#define X265_CPU_FMA3 (1 << 12) /* Intel FMA3 */
#define X265_CPU_BMI1 (1 << 13) /* BMI1 */
#define X265_CPU_BMI2 (1 << 14) /* BMI2 */
#define X265_CPU_AVX2 (1 << 15) /* AVX2 */
#define X265_CPU_AVX512 (1 << 16) /* AVX-512 {F, CD, BW, DQ, VL}, requires OS support */
/* x86 modifiers */
#define X265_CPU_CACHELINE_32 (1 << 17) /* avoid memory loads that span the border between two cachelines */
#define X265_CPU_CACHELINE_64 (1 << 18) /* 32/64 is the size of a cacheline in bytes */
#define X265_CPU_SSE2_IS_SLOW (1 << 19) /* avoid most SSE2 functions on Athlon64 */
#define X265_CPU_SSE2_IS_FAST (1 << 20) /* a few functions are only faster on Core2 and Phenom */
#define X265_CPU_SLOW_SHUFFLE (1 << 21) /* The Conroe has a slow shuffle unit (relative to overall SSE performance) */
#define X265_CPU_STACK_MOD4 (1 << 22) /* if stack is only mod4 and not mod16 */
#define X265_CPU_SLOW_ATOM (1 << 23) /* The Atom is terrible: slow SSE unaligned loads, slow
* SIMD multiplies, slow SIMD variable shifts, slow pshufb,
* cacheline split penalties -- gather everything here that
* isn't shared by other CPUs to avoid making half a dozen
* new SLOW flags. */
#define X265_CPU_SLOW_PSHUFB (1 << 24) /* such as on the Intel Atom */
#define X265_CPU_SLOW_PALIGNR (1 << 25) /* such as on the AMD Bobcat */
/* ARM */
#define X265_CPU_ARMV6 0x0000001
#define X265_CPU_NEON 0x0000002 /* ARM NEON */
#define X265_CPU_FAST_NEON_MRC 0x0000004 /* Transfer from NEON to ARM register is fast (Cortex-A9) */
/* IBM Power8 */
#define X265_CPU_ALTIVEC 0x0000001
#define X265_MAX_SUBPEL_LEVEL 7
/* Log level */
#define X265_LOG_NONE (-1)
#define X265_LOG_ERROR 0
#define X265_LOG_WARNING 1
#define X265_LOG_INFO 2
#define X265_LOG_DEBUG 3
#define X265_LOG_FULL 4
#define X265_B_ADAPT_NONE 0
#define X265_B_ADAPT_FAST 1
#define X265_B_ADAPT_TRELLIS 2
#define X265_REF_LIMIT_DEPTH 1
#define X265_REF_LIMIT_CU 2
#define X265_TU_LIMIT_BFS 1
#define X265_TU_LIMIT_DFS 2
#define X265_TU_LIMIT_NEIGH 4
#define X265_BFRAME_MAX 16
#define X265_MAX_FRAME_THREADS 16
#define X265_TYPE_AUTO 0x0000 /* Let x265 choose the right type */
#define X265_TYPE_IDR 0x0001
#define X265_TYPE_I 0x0002
#define X265_TYPE_P 0x0003
#define X265_TYPE_BREF 0x0004 /* Non-disposable B-frame */
#define X265_TYPE_B 0x0005
#define IS_X265_TYPE_I(x) ((x) == X265_TYPE_I || (x) == X265_TYPE_IDR)
#define IS_X265_TYPE_B(x) ((x) == X265_TYPE_B || (x) == X265_TYPE_BREF)
#define X265_QP_AUTO 0
#define X265_AQ_NONE 0
#define X265_AQ_VARIANCE 1
#define X265_AQ_AUTO_VARIANCE 2
#define X265_AQ_AUTO_VARIANCE_BIASED 3
#define X265_AQ_EDGE 4
#define x265_ADAPT_RD_STRENGTH 4
#define X265_REFINE_INTER_LEVELS 3
/* NOTE! For this release only X265_CSP_I420 and X265_CSP_I444 are supported */
/* Supported internal color space types (according to semantics of chroma_format_idc) */
#define X265_CSP_I400 0 /* yuv 4:0:0 planar */
#define X265_CSP_I420 1 /* yuv 4:2:0 planar */
#define X265_CSP_I422 2 /* yuv 4:2:2 planar */
#define X265_CSP_I444 3 /* yuv 4:4:4 planar */
#define X265_CSP_COUNT 4 /* Number of supported internal color spaces */
/* These color spaces will eventually be supported as input pictures. The pictures will
* be converted to the appropriate planar color spaces at ingest */
#define X265_CSP_NV12 4 /* yuv 4:2:0, with one y plane and one packed u+v */
#define X265_CSP_NV16 5 /* yuv 4:2:2, with one y plane and one packed u+v */
/* Interleaved color-spaces may eventually be supported as input pictures */
#define X265_CSP_BGR 6 /* packed bgr 24bits */
#define X265_CSP_BGRA 7 /* packed bgr 32bits */
#define X265_CSP_RGB 8 /* packed rgb 24bits */
#define X265_CSP_MAX 9 /* end of list */
#define X265_EXTENDED_SAR 255 /* aspect ratio explicitly specified as width:height */
/* Analysis options */
#define X265_ANALYSIS_OFF 0
#define X265_ANALYSIS_SAVE 1
#define X265_ANALYSIS_LOAD 2
typedef struct x265_cli_csp
{
int planes;
int width[3];
int height[3];
} x265_cli_csp;
static const x265_cli_csp x265_cli_csps[] =
{
{ 1, { 0, 0, 0 }, { 0, 0, 0 } }, /* i400 */
{ 3, { 0, 1, 1 }, { 0, 1, 1 } }, /* i420 */
{ 3, { 0, 1, 1 }, { 0, 0, 0 } }, /* i422 */
{ 3, { 0, 0, 0 }, { 0, 0, 0 } }, /* i444 */
{ 2, { 0, 0 }, { 0, 1 } }, /* nv12 */
{ 2, { 0, 0 }, { 0, 0 } }, /* nv16 */
};
/* rate tolerance method */
typedef enum
{
X265_RC_ABR,
X265_RC_CQP,
X265_RC_CRF
} X265_RC_METHODS;
/* slice type statistics */
typedef struct x265_sliceType_stats
{
double avgQp;
double bitrate;
double psnrY;
double psnrU;
double psnrV;
double ssim;
uint32_t numPics;
} x265_sliceType_stats;
/* Output statistics from encoder */
typedef struct x265_stats
{
double globalPsnrY;
double globalPsnrU;
double globalPsnrV;
double globalPsnr;
double globalSsim;
double elapsedEncodeTime; /* wall time since encoder was opened */
double elapsedVideoTime; /* encoded picture count / frame rate */
double bitrate; /* accBits / elapsed video time */
double aggregateVmafScore; /* aggregate VMAF score for input video*/
uint64_t accBits; /* total bits output thus far */
uint32_t encodedPictureCount; /* number of output pictures thus far */
uint32_t totalWPFrames; /* number of uni-directional weighted frames used */
x265_sliceType_stats statsI; /* statistics of I slice */
x265_sliceType_stats statsP; /* statistics of P slice */
x265_sliceType_stats statsB; /* statistics of B slice */
uint16_t maxCLL; /* maximum content light level */
uint16_t maxFALL; /* maximum frame average light level */
} x265_stats;
/* String values accepted by x265_param_parse() (and CLI) for various parameters */
static const char * const x265_motion_est_names[] = { "dia", "hex", "umh", "star", "sea", "full", 0 };
static const char * const x265_source_csp_names[] = { "i400", "i420", "i422", "i444", "nv12", "nv16", 0 };
static const char * const x265_video_format_names[] = { "component", "pal", "ntsc", "secam", "mac", "unknown", 0 };
static const char * const x265_fullrange_names[] = { "limited", "full", 0 };
static const char * const x265_colorprim_names[] = { "reserved", "bt709", "unknown", "reserved", "bt470m", "bt470bg", "smpte170m", "smpte240m", "film", "bt2020", "smpte428", "smpte431", "smpte432", 0 };
static const char * const x265_transfer_names[] = { "reserved", "bt709", "unknown", "reserved", "bt470m", "bt470bg", "smpte170m", "smpte240m", "linear", "log100",
"log316", "iec61966-2-4", "bt1361e", "iec61966-2-1", "bt2020-10", "bt2020-12",
"smpte2084", "smpte428", "arib-std-b67", 0 };
static const char * const x265_colmatrix_names[] = { "gbr", "bt709", "unknown", "", "fcc", "bt470bg", "smpte170m", "smpte240m",
"ycgco", "bt2020nc", "bt2020c", "smpte2085", "chroma-derived-nc", "chroma-derived-c", "ictcp", 0 };
static const char * const x265_sar_names[] = { "unknown", "1:1", "12:11", "10:11", "16:11", "40:33", "24:11", "20:11",
"32:11", "80:33", "18:11", "15:11", "64:33", "160:99", "4:3", "3:2", "2:1", 0 };
static const char * const x265_interlace_names[] = { "prog", "tff", "bff", 0 };
static const char * const x265_analysis_names[] = { "off", "save", "load", 0 };
struct x265_zone;
struct x265_param;
/* Zones: override ratecontrol for specific sections of the video.
* If zones overlap, whichever comes later in the list takes precedence. */
typedef struct x265_zone
{
int startFrame, endFrame; /* range of frame numbers */
int bForceQp; /* whether to use qp vs bitrate factor */
int qp;
float bitrateFactor;
struct x265_param* zoneParam;
} x265_zone;
/* data to calculate aggregate VMAF score */
typedef struct x265_vmaf_data
{
int width;
int height;
size_t offset;
int internalBitDepth;
FILE *reference_file; /* FILE pointer for input file */
FILE *distorted_file; /* FILE pointer for recon file generated*/
}x265_vmaf_data;
/* data to calculate frame level VMAF score */
typedef struct x265_vmaf_framedata
{
int width;
int height;
int frame_set;
int internalBitDepth;
void *reference_frame; /* points to fenc of particular frame */
void *distorted_frame; /* points to recon of particular frame */
}x265_vmaf_framedata;
/* common data needed to calculate both frame level and video level VMAF scores */
typedef struct x265_vmaf_commondata
{
char *format;
char *model_path;
char *log_path;
char *log_fmt;
int disable_clip;
int disable_avx;
int enable_transform;
int phone_model;
int psnr;
int ssim;
int ms_ssim;
char *pool;
int thread;
int subsample;
int enable_conf_interval;
}x265_vmaf_commondata;
static const x265_vmaf_commondata vcd[] = { { NULL, (char *)"/usr/local/share/model/vmaf_v0.6.1.pkl", NULL, NULL, 0, 0, 0, 0, 0, 0, 0, NULL, 0, 1, 0 } };
/* x265 input parameters
*
* For version safety you may use x265_param_alloc/free() to manage the
* allocation of x265_param instances, and x265_param_parse() to assign values
* by name. By never dereferencing param fields in your own code you can treat
* x265_param as an opaque data structure */
typedef struct x265_param
{
/* x265_param_default() will auto-detect this cpu capability bitmap. it is
* recommended to not change this value unless you know the cpu detection is
* somehow flawed on your target hardware. The asm function tables are
* process global, the first encoder configures them for all encoders */
int cpuid;
/*== Parallelism Features ==*/
/* Number of concurrently encoded frames between 1 and X265_MAX_FRAME_THREADS
* or 0 for auto-detection. By default x265 will use a number of frame
* threads empirically determined to be optimal for your CPU core count,
* between 2 and 6. Using more than one frame thread causes motion search
* in the down direction to be clamped but otherwise encode behavior is
* unaffected. With CQP rate control the output bitstream is deterministic
* for all values of frameNumThreads greater than 1. All other forms of
* rate-control can be negatively impacted by increases to the number of
* frame threads because the extra concurrency adds uncertainty to the
* bitrate estimations. Frame parallelism is generally limited by the the
* is generally limited by the the number of CU rows
*
* When thread pools are used, each frame thread is assigned to a single
* pool and the frame thread itself is given the node affinity of its pool.
* But when no thread pools are used no node affinity is assigned. */
int frameNumThreads;
/* Comma seperated list of threads per NUMA node. If "none", then no worker
* pools are created and only frame parallelism is possible. If NULL or ""
* (default) x265 will use all available threads on each NUMA node.
*
* '+' is a special value indicating all cores detected on the node
* '*' is a special value indicating all cores detected on the node and all
* remaining nodes.
* '-' is a special value indicating no cores on the node, same as '0'
*
* example strings for a 4-node system:
* "" - default, unspecified, all numa nodes are used for thread pools
* "*" - same as default
* "none" - no thread pools are created, only frame parallelism possible
* "-" - same as "none"
* "10" - allocate one pool, using up to 10 cores on node 0
* "-,+" - allocate one pool, using all cores on node 1
* "+,-,+" - allocate two pools, using all cores on nodes 0 and 2
* "+,-,+,-" - allocate two pools, using all cores on nodes 0 and 2
* "-,*" - allocate three pools, using all cores on nodes 1, 2 and 3
* "8,8,8,8" - allocate four pools with up to 8 threads in each pool
*
* The total number of threads will be determined by the number of threads
* assigned to all nodes. The worker threads will each be given affinity for
* their node, they will not be allowed to migrate between nodes, but they
* will be allowed to move between CPU cores within their node.
*
* If the three pool features: bEnableWavefront, bDistributeModeAnalysis and
* bDistributeMotionEstimation are all disabled, then numaPools is ignored
* and no thread pools are created.
*
* If "none" is specified, then all three of the thread pool features are
* implicitly disabled.
*
* Multiple thread pools will be allocated for any NUMA node with more than
* 64 logical CPU cores. But any given thread pool will always use at most
* one NUMA node.
*
* Frame encoders are distributed between the available thread pools, and
* the encoder will never generate more thread pools than frameNumThreads */
const char* numaPools;
/* Enable wavefront parallel processing, greatly increases parallelism for
* less than 1% compression efficiency loss. Requires a thread pool, enabled
* by default */
int bEnableWavefront;
/* Use multiple threads to measure CU mode costs. Recommended for many core
* CPUs. On RD levels less than 5, it may not offload enough work to warrant
* the overhead. It is useful with the slow preset since it has the
* rectangular predictions enabled. At RD level 5 and 6 (preset slower and
* below), this feature should be an unambiguous win if you have CPU
* cores available for work. Default disabled */
int bDistributeModeAnalysis;
/* Use multiple threads to perform motion estimation to (ME to one reference
* per thread). Recommended for many core CPUs. The more references the more
* motion searches there will be to distribute. This option is often not a
* win, particularly in video sequences with low motion. Default disabled */
int bDistributeMotionEstimation;
/*== Logging Features ==*/
/* Enable analysis and logging distribution of CUs. Now deprecated */
int bLogCuStats;
/* Enable the measurement and reporting of PSNR. Default is enabled */
int bEnablePsnr;
/* Enable the measurement and reporting of SSIM. Default is disabled */
int bEnableSsim;
/* The level of logging detail emitted by the encoder. X265_LOG_NONE to
* X265_LOG_FULL, default is X265_LOG_INFO */
int logLevel;
/* Level of csv logging. 0 is summary, 1 is frame level logging,
* 2 is frame level logging with performance statistics */
int csvLogLevel;
/* filename of CSV log. If csvLogLevel is non-zero, the encoder will emit
* per-slice statistics to this log file in encode order. Otherwise the
* encoder will emit per-stream statistics into the log file when
* x265_encoder_log is called (presumably at the end of the encode) */
const char* csvfn;
/*== Internal Picture Specification ==*/
/* Internal encoder bit depth. If x265 was compiled to use 8bit pixels
* (HIGH_BIT_DEPTH=0), this field must be 8, else this field must be 10.
* Future builds may support 12bit pixels. */
int internalBitDepth;
/* Color space of internal pictures, must match color space of input
* pictures */
int internalCsp;
/* Numerator and denominator of frame rate */
uint32_t fpsNum;
uint32_t fpsDenom;
/* Width (in pixels) of the source pictures. If this width is not an even
* multiple of 4, the encoder will pad the pictures internally to meet this
* minimum requirement. All valid HEVC widths are supported */
int sourceWidth;
/* Height (in pixels) of the source pictures. If this height is not an even
* multiple of 4, the encoder will pad the pictures internally to meet this
* minimum requirement. All valid HEVC heights are supported */
int sourceHeight;
/* Interlace type of source pictures. 0 - progressive pictures (default).
* 1 - top field first, 2 - bottom field first. HEVC encodes interlaced
* content as fields, they must be provided to the encoder in the correct
* temporal order */
int interlaceMode;
/* Total Number of frames to be encoded, calculated from the user input
* (--frames) and (--seek). In case, the input is read from a pipe, this can
* remain as 0. It is later used in 2 pass RateControl, hence storing the
* value in param */
int totalFrames;
/*== Profile / Tier / Level ==*/
/* Note: the profile is specified by x265_param_apply_profile() */
/* Minimum decoder requirement level. Defaults to 0, which implies auto-
* detection by the encoder. If specified, the encoder will attempt to bring
* the encode specifications within that specified level. If the encoder is
* unable to reach the level it issues a warning and emits the actual
* decoder requirement. If the requested requirement level is higher than
* the actual level, the actual requirement level is signaled. The value is
* an specified as an integer with the level times 10, for example level
* "5.1" is specified as 51, and level "5.0" is specified as 50. */
int levelIdc;
/* if levelIdc is specified (non-zero) this flag will differentiate between
* Main (0) and High (1) tier. Default is Main tier (0) */
int bHighTier;
/* Enable UHD Blu-ray compatibility support. If specified, the encoder will
* attempt to modify/set the encode specifications. If the encoder is unable
* to do so, this option will be turned OFF. */
int uhdBluray;
/* The maximum number of L0 references a P or B slice may use. This
* influences the size of the decoded picture buffer. The higher this
* number, the more reference frames there will be available for motion
* search, improving compression efficiency of most video at a cost of
* performance. Value must be between 1 and 16, default is 3 */
int maxNumReferences;
/* Allow libx265 to emit HEVC bitstreams which do not meet strict level
* requirements. Defaults to false */
int bAllowNonConformance;
/*== Bitstream Options ==*/
/* Flag indicating whether VPS, SPS and PPS headers should be output with
* each keyframe. Default false */
int bRepeatHeaders;
/* Flag indicating whether the encoder should generate start codes (Annex B
* format) or length (file format) before NAL units. Default true, Annex B.
* Muxers should set this to the correct value */
int bAnnexB;
/* Flag indicating whether the encoder should emit an Access Unit Delimiter
* NAL at the start of every access unit. Default false */
int bEnableAccessUnitDelimiters;
/* Enables the buffering period SEI and picture timing SEI to signal the HRD
* parameters. Default is disabled */
int bEmitHRDSEI;
/* Enables the emission of a user data SEI with the stream headers which
* describes the encoder version, build info, and parameters. This is
* very helpful for debugging, but may interfere with regression tests.
* Default enabled */
int bEmitInfoSEI;
/* Enable the generation of SEI messages for each encoded frame containing
* the hashes of the three reconstructed picture planes. Most decoders will
* validate those hashes against the reconstructed images it generates and
* report any mismatches. This is essentially a debugging feature. Hash
* types are MD5(1), CRC(2), Checksum(3). Default is 0, none */
int decodedPictureHashSEI;
/* Enable Temporal Sub Layers while encoding, signals NAL units of coded
* slices with their temporalId. Output bitstreams can be extracted either
* at the base temporal layer (layer 0) with roughly half the frame rate or
* at a higher temporal layer (layer 1) that decodes all the frames in the
* sequence. */
int bEnableTemporalSubLayers;
/*== GOP structure and slice type decisions (lookahead) ==*/
/* Enable open GOP - meaning I slices are not necessarily IDR and thus frames
* encoded after an I slice may reference frames encoded prior to the I
* frame which have remained in the decoded picture buffer. Open GOP
* generally has better compression efficiency and negligible encoder
* performance impact, but the use case may preclude it. Default true */
int bOpenGOP;
/* Scene cuts closer together than this are coded as I, not IDR. */
int keyframeMin;
/* Maximum keyframe distance or intra period in number of frames. If 0 or 1,
* all frames are I frames. A negative value is casted to MAX_INT internally
* which effectively makes frame 0 the only I frame. Default is 250 */
int keyframeMax;
/* Maximum consecutive B frames that can be emitted by the lookahead. When
* b-adapt is 0 and keyframMax is greater than bframes, the lookahead emits
* a fixed pattern of `bframes` B frames between each P. With b-adapt 1 the
* lookahead ignores the value of bframes for the most part. With b-adapt 2
* the value of bframes determines the search (POC) distance performed in
* both directions, quadratically increasing the compute load of the
* lookahead. The higher the value, the more B frames the lookahead may
* possibly use consecutively, usually improving compression. Default is 3,
* maximum is 16 */
int bframes;
/* Sets the operating mode of the lookahead. With b-adapt 0, the GOP
* structure is fixed based on the values of keyframeMax and bframes.
* With b-adapt 1 a light lookahead is used to chose B frame placement.
* With b-adapt 2 (trellis) a viterbi B path selection is performed */
int bFrameAdaptive;
/* When enabled, the encoder will use the B frame in the middle of each
* mini-GOP larger than 2 B frames as a motion reference for the surrounding
* B frames. This improves compression efficiency for a small performance
* penalty. Referenced B frames are treated somewhere between a B and a P
* frame by rate control. Default is enabled. */
int bBPyramid;
/* A value which is added to the cost estimate of B frames in the lookahead.
* It may be a positive value (making B frames appear less expensive, which
* biases the lookahead to choose more B frames) or negative, which makes the
* lookahead choose more P frames. Default is 0, there are no limits */
int bFrameBias;
/* The number of frames that must be queued in the lookahead before it may
* make slice decisions. Increasing this value directly increases the encode
* latency. The longer the queue the more optimally the lookahead may make
* slice decisions, particularly with b-adapt 2. When cu-tree is enabled,
* the length of the queue linearly increases the effectiveness of the
* cu-tree analysis. Default is 40 frames, maximum is 250 */
int lookaheadDepth;
/* Use multiple worker threads to measure the estimated cost of each frame
* within the lookahead. When bFrameAdaptive is 2, most frame cost estimates
* will be performed in batch mode, many cost estimates at the same time,
* and lookaheadSlices is ignored for batched estimates. The effect on
* performance can be quite small. The higher this parameter, the less
* accurate the frame costs will be (since context is lost across slice
* boundaries) which will result in less accurate B-frame and scene-cut
* decisions. Default is 0 - disabled. 1 is the same as 0. Max 16 */
int lookaheadSlices;
/* An arbitrary threshold which determines how aggressively the lookahead
* should detect scene cuts. The default (40) is recommended. */
int scenecutThreshold;
/* Replace keyframes by using a column of intra blocks that move across the video
* from one side to the other, thereby "refreshing" the image. In effect, instead of a
* big keyframe, the keyframe is "spread" over many frames. */
int bIntraRefresh;
/*== Coding Unit (CU) definitions ==*/
/* Maximum CU width and height in pixels. The size must be 64, 32, or 16.
* The higher the size, the more efficiently x265 can encode areas of low
* complexity, greatly improving compression efficiency at large
* resolutions. The smaller the size, the more effective wavefront and
* frame parallelism will become because of the increase in rows. default 64
* All encoders within the same process must use the same maxCUSize, until
* all encoders are closed and x265_cleanup() is called to reset the value. */
uint32_t maxCUSize;
/* Minimum CU width and height in pixels. The size must be 64, 32, 16, or
* 8. Default 8. All encoders within the same process must use the same
* minCUSize. */
uint32_t minCUSize;
/* Enable rectangular motion prediction partitions (vertical and
* horizontal), available at all CU depths from 64x64 to 8x8. Default is
* disabled */
int bEnableRectInter;
/* Enable asymmetrical motion predictions. At CU depths 64, 32, and 16, it
* is possible to use 25%/75% split partitions in the up, down, right, left
* directions. For some material this can improve compression efficiency at
* the cost of extra analysis. bEnableRectInter must be enabled for this
* feature to be used. Default disabled */
int bEnableAMP;
/*== Residual Quadtree Transform Unit (TU) definitions ==*/
/* Maximum TU width and height in pixels. The size must be 32, 16, 8 or 4.
* The larger the size the more efficiently the residual can be compressed
* by the DCT transforms, at the expense of more computation */
uint32_t maxTUSize;
/* The additional depth the residual quad-tree is allowed to recurse beyond
* the coding quad-tree, for inter coded blocks. This must be between 1 and
* 4. The higher the value the more efficiently the residual can be
* compressed by the DCT transforms, at the expense of much more compute */
uint32_t tuQTMaxInterDepth;
/* The additional depth the residual quad-tree is allowed to recurse beyond
* the coding quad-tree, for intra coded blocks. This must be between 1 and
* 4. The higher the value the more efficiently the residual can be
* compressed by the DCT transforms, at the expense of much more compute */
uint32_t tuQTMaxIntraDepth;
/* Enable early exit decisions for inter coded blocks to avoid recursing to
* higher TU depths. Default: 0 */
uint32_t limitTU;
/* Set the amount of rate-distortion analysis to use within quant. 0 implies
* no rate-distortion optimization. At level 1 rate-distortion cost is used to
* find optimal rounding values for each level (and allows psy-rdoq to be
* enabled). At level 2 rate-distortion cost is used to make decimate decisions
* on each 4x4 coding group (including the cost of signaling the group within
* the group bitmap). Psy-rdoq is less effective at preserving energy when
* RDOQ is at level 2. Default: 0 */
int rdoqLevel;
/* Enable the implicit signaling of the sign bit of the last coefficient of
* each transform unit. This saves one bit per TU at the expense of figuring
* out which coefficient can be toggled with the least distortion.
* Default is enabled */
int bEnableSignHiding;
/* Allow intra coded blocks to be encoded directly as residual without the
* DCT transform, when this improves efficiency. Checking whether the block
* will benefit from this option incurs a performance penalty. Default is
* disabled */
int bEnableTransformSkip;
/* An integer value in range of 0 to 2000, which denotes strength of noise
* reduction in intra CUs. 0 means disabled */
int noiseReductionIntra;
/* An integer value in range of 0 to 2000, which denotes strength of noise
* reduction in inter CUs. 0 means disabled */
int noiseReductionInter;
/* Quantization scaling lists. HEVC supports 6 quantization scaling lists to
* be defined; one each for Y, Cb, Cr for intra prediction and one each for
* inter prediction.
*
* - NULL and "off" will disable quant scaling (default)
* - "default" will enable the HEVC default scaling lists, which
* do not need to be signaled since they are specified
* - all other strings indicate a filename containing custom scaling lists
* in the HM format. The encode will fail if the file is not parsed
* correctly. Custom lists must be signaled in the SPS. */
const char *scalingLists;
/*== Intra Coding Tools ==*/
/* Enable constrained intra prediction. This causes intra prediction to
* input samples that were inter predicted. For some use cases this is
* believed to me more robust to stream errors, but it has a compression
* penalty on P and (particularly) B slices. Defaults to disabled */
int bEnableConstrainedIntra;
/* Enable strong intra smoothing for 32x32 blocks where the reference
* samples are flat. It may or may not improve compression efficiency,
* depending on your source material. Defaults to disabled */
int bEnableStrongIntraSmoothing;
/*== Inter Coding Tools ==*/
/* The maximum number of merge candidates that are considered during inter
* analysis. This number (between 1 and 5) is signaled in the stream
* headers and determines the number of bits required to signal a merge so
* it can have significant trade-offs. The smaller this number the higher
* the performance but the less compression efficiency. Default is 3 */
uint32_t maxNumMergeCand;
/* Limit the motion references used for each search based on the results of
* previous motion searches already performed for the same CU: If 0 all
* references are always searched. If X265_REF_LIMIT_CU all motion searches
* will restrict themselves to the references selected by the 2Nx2N search
* at the same depth. If X265_REF_LIMIT_DEPTH the 2Nx2N motion search will
* only use references that were selected by the best motion searches of the
* 4 split CUs at the next lower CU depth. The two flags may be combined */
uint32_t limitReferences;
/* Limit modes analyzed for each CU using cost metrics from the 4 sub-CUs */
uint32_t limitModes;
/* ME search method (DIA, HEX, UMH, STAR, SEA, FULL). The search patterns
* (methods) are sorted in increasing complexity, with diamond being the
* simplest and fastest and full being the slowest. DIA, HEX, UMH and SEA were
* adapted from x264 directly. STAR is an adaption of the HEVC reference
* encoder's three step search, while full is a naive exhaustive search. The
* default is the star search, it has a good balance of performance and
* compression efficiency */
int searchMethod;
/* A value between 0 and X265_MAX_SUBPEL_LEVEL which adjusts the amount of
* effort performed during sub-pel refine. Default is 5 */
int subpelRefine;
/* The maximum distance from the motion prediction that the full pel motion
* search is allowed to progress before terminating. This value can have an
* effect on frame parallelism, as referenced frames must be at least this
* many rows of reconstructed pixels ahead of the referencee at all times.
* (When considering reference lag, the motion prediction must be ignored
* because it cannot be known ahead of time). Default is 60, which is the
* default max CU size (64) minus the luma HPEL half-filter length (4). If a
* smaller CU size is used, the search range should be similarly reduced */
int searchRange;
/* Enable availability of temporal motion vector for AMVP, default is enabled */
int bEnableTemporalMvp;
/* Enable 3-level Hierarchical motion estimation at One-Sixteenth, Quarter and Full resolution.
* Default is disabled */
int bEnableHME;
/* Enable HME search method (DIA, HEX, UMH, STAR, SEA, FULL) for level 0, 1 and 2.
* Default is hex, umh, umh for L0, L1 and L2 respectively. */
int hmeSearchMethod[3];
/* Enable weighted prediction in P slices. This enables weighting analysis
* in the lookahead, which influences slice decisions, and enables weighting
* analysis in the main encoder which allows P reference samples to have a
* weight function applied to them prior to using them for motion
* compensation. In video which has lighting changes, it can give a large
* improvement in compression efficiency. Default is enabled */
int bEnableWeightedPred;
/* Enable weighted prediction in B slices. Default is disabled */
int bEnableWeightedBiPred;
/* Enable source pixels in motion estimation. Default is disabled */
int bSourceReferenceEstimation;
/*== Loop Filters ==*/
/* Enable the deblocking loop filter, which improves visual quality by
* reducing blocking effects at block edges, particularly at lower bitrates
* or higher QP. When enabled it adds another CU row of reference lag,
* reducing frame parallelism effectiveness. Default is enabled */
int bEnableLoopFilter;
/* deblocking filter tC offset [-6, 6] -6 light filter, 6 strong.
* This is the coded div2 value, actual offset is doubled at use */
int deblockingFilterTCOffset;
/* deblocking filter Beta offset [-6, 6] -6 light filter, 6 strong
* This is the coded div2 value, actual offset is doubled at use */
int deblockingFilterBetaOffset;
/* Enable the Sample Adaptive Offset loop filter, which reduces distortion
* effects by adjusting reconstructed sample values based on histogram
* analysis to better approximate the original samples. When enabled it adds
* a CU row of reference lag, reducing frame parallelism effectiveness.
* Default is enabled */
int bEnableSAO;
/* Note: when deblocking and SAO are both enabled, the loop filter CU lag is
* only one row, as they operate in series on the same row. */
/* Select the method in which SAO deals with deblocking boundary pixels. If
* disabled the right and bottom boundary areas are skipped. If enabled,
* non-deblocked pixels are used entirely. Default is disabled */
int bSaoNonDeblocked;
/* Select tune rate in which SAO has to be applied.
1 - Filtering applied only on I-frames(I) [Light tune]
2 - No Filtering on B frames (I, P) [Medium tune]
3 - No Filtering on non-ref b frames (I, P, B) [Strong tune] */
int selectiveSAO;
/*== Analysis tools ==*/
/* A value between 1 and 6 (both inclusive) which determines the level of
* rate distortion optimizations to perform during mode and depth decisions.
* The more RDO the better the compression efficiency at a major cost of
* performance. Default is 3 */
int rdLevel;
/* Enable early skip decisions to avoid analysing additional modes in likely
* skip blocks. Default is disabled */
int bEnableEarlySkip;
/* Enable early CU size decisions to avoid recursing to higher depths.
* Default is enabled */
int bEnableRecursionSkip;
/* Use a faster search method to find the best intra mode. Default is 0 */
int bEnableFastIntra;
/* Enable a faster determination of whether skipping the DCT transform will
* be beneficial. Slight performance gain for some compression loss. Default
* is enabled */
int bEnableTSkipFast;
/* The CU Lossless flag, when enabled, compares the rate-distortion costs
* for normal and lossless encoding, and chooses the best mode for each CU.
* If lossless mode is chosen, the cu-transquant-bypass flag is set for that
* CU */
int bCULossless;
/* Specify whether to attempt to encode intra modes in B frames. By default
* enabled, but only applicable for the presets which use rdLevel 5 or 6
* (veryslow and placebo). All other presets will not try intra in B frames
* regardless of this setting */
int bIntraInBFrames;
/* Apply an optional penalty to the estimated cost of 32x32 intra blocks in
* non-intra slices. 0 is disabled, 1 enables a small penalty, and 2 enables
* a full penalty. This favors inter-coding and its low bitrate over
* potential increases in distortion, but usually improves performance.
* Default is 0 */
int rdPenalty;
/* Psycho-visual rate-distortion strength. Only has an effect in presets
* which use RDO. It makes mode decision favor options which preserve the
* energy of the source, at the cost of lost compression. The value must
* be between 0 and 5.0, 1.0 is typical. Default 2.0 */
double psyRd;
/* Strength of psycho-visual optimizations in quantization. Only has an
* effect when RDOQ is enabled (presets slow, slower and veryslow). The
* value must be between 0 and 50, 1.0 is typical. Default 0 */
double psyRdoq;
/* Perform quantisation parameter based RD refinement. RD cost is calculated
* on the best CU partitions, chosen after the CU analysis, for a range of QPs
* to find the optimal rounding effect. Only effective at rd-levels 5 and 6.
* Default disabled */
int bEnableRdRefine;
/* If save, write per-frame analysis information into analysis buffers.
* If load, read analysis information into analysis buffer and use this
* analysis information to reduce the amount of work the encoder must perform.
* Default disabled. Now deprecated*/
int analysisReuseMode;
/* Filename for multi-pass-opt-analysis/distortion. Default name is "x265_analysis.dat" */
const char* analysisReuseFileName;
/*== Rate Control ==*/
/* The lossless flag enables true lossless coding, bypassing scaling,
* transform, quantization and in-loop filter processes. This is used for
* ultra-high bitrates with zero loss of quality. It implies no rate control */
int bLossless;
/* Generally a small signed integer which offsets the QP used to quantize
* the Cb chroma residual (delta from luma QP specified by rate-control).
* Default is 0, which is recommended */
int cbQpOffset;
/* Generally a small signed integer which offsets the QP used to quantize
* the Cr chroma residual (delta from luma QP specified by rate-control).
* Default is 0, which is recommended */
int crQpOffset;
/* Specifies the preferred transfer characteristics syntax element in the
* alternative transfer characteristics SEI message (see. D.2.38 and D.3.38 of
* JCTVC-W1005 http://phenix.it-sudparis.eu/jct/doc_end_user/documents/23_San%20Diego/wg11/JCTVC-W1005-v4.zip
* */
int preferredTransferCharacteristics;
/*
* Specifies the value for the pic_struc syntax element of the picture timing SEI message (See D2.3 and D3.3)
* of the HEVC spec. for a detailed explanation
* */
int pictureStructure;
struct
{
/* Explicit mode of rate-control, necessary for API users. It must
* be one of the X265_RC_METHODS enum values. */
int rateControlMode;
/* Base QP to use for Constant QP rate control. Adaptive QP may alter
* the QP used for each block. If a QP is specified on the command line
* CQP rate control is implied. Default: 32 */
int qp;
/* target bitrate for Average BitRate (ABR) rate control. If a non- zero
* bitrate is specified on the command line, ABR is implied. Default 0 */
int bitrate;
/* qComp sets the quantizer curve compression factor. It weights the frame
* quantizer based on the complexity of residual (measured by lookahead).
* Default value is 0.6. Increasing it to 1 will effectively generate CQP */
double qCompress;
/* QP offset between I/P and P/B frames. Default ipfactor: 1.4
* Default pbFactor: 1.3 */
double ipFactor;
double pbFactor;
/* Ratefactor constant: targets a certain constant "quality".
* Acceptable values between 0 and 51. Default value: 28 */
double rfConstant;
/* Max QP difference between frames. Default: 4 */
int qpStep;
/* Enable adaptive quantization. This mode distributes available bits between all
* CTUs of a frame, assigning more bits to low complexity areas. Turning
* this ON will usually affect PSNR negatively, however SSIM and visual quality
* generally improves. Default: X265_AQ_AUTO_VARIANCE */
int aqMode;
/*
* Enable adaptive quantization.
* It scales the quantization step size according to the spatial activity of one
* coding unit relative to frame average spatial activity. This AQ method utilizes
* the minimum variance of sub-unit in each coding unit to represent the coding
* unit’s spatial complexity. */
int hevcAq;
/* Sets the strength of AQ bias towards low detail CTUs. Valid only if
* AQ is enabled. Default value: 1.0. Acceptable values between 0.0 and 3.0 */
double aqStrength;
/* Delta QP range by QP adaptation based on a psycho-visual model.
* Acceptable values between 1.0 to 6.0 */
double qpAdaptationRange;
/* Sets the maximum rate the VBV buffer should be assumed to refill at
* Default is zero */
int vbvMaxBitrate;
/* Sets the size of the VBV buffer in kilobits. Default is zero */
int vbvBufferSize;
/* Sets how full the VBV buffer must be before playback starts. If it is less than
* 1, then the initial fill is vbv-init * vbvBufferSize. Otherwise, it is
* interpreted as the initial fill in kbits. Default is 0.9 */
double vbvBufferInit;
/* Enable CUTree rate-control. This keeps track of the CUs that propagate temporally
* across frames and assigns more bits to these CUs. Improves encode efficiency.
* Default: enabled */
int cuTree;
/* In CRF mode, maximum CRF as caused by VBV. 0 implies no limit */
double rfConstantMax;
/* In CRF mode, minimum CRF as caused by VBV */
double rfConstantMin;
/* Multi-pass encoding */
/* Enable writing the stats in a multi-pass encode to the stat output file */
int bStatWrite;
/* Enable loading data from the stat input file in a multi pass encode */
int bStatRead;
/* Filename of the 2pass output/input stats file, if unspecified the
* encoder will default to using x265_2pass.log */
const char* statFileName;
/* temporally blur quants */
double qblur;
/* temporally blur complexity */
double complexityBlur;
/* Enable slow and a more detailed first pass encode in multi pass rate control */
int bEnableSlowFirstPass;
/* rate-control overrides */
int zoneCount;
x265_zone* zones;
/* number of zones in zone-file*/
int zonefileCount;
/* specify a text file which contains MAX_MAX_QP + 1 floating point
* values to be copied into x265_lambda_tab and a second set of
* MAX_MAX_QP + 1 floating point values for x265_lambda2_tab. All values
* are separated by comma, space or newline. Text after a hash (#) is
* ignored. The lambda tables are process-global, so these new lambda
* values will affect all encoders in the same process */
const char* lambdaFileName;
/* Enable stricter conditions to check bitrate deviations in CBR mode. May compromise
* quality to maintain bitrate adherence */
int bStrictCbr;
/* Enable adaptive quantization at CU granularity. This parameter specifies
* the minimum CU size at which QP can be adjusted, i.e. Quantization Group
* (QG) size. Allowed values are 64, 32, 16, 8 provided it falls within the
* inclusuve range [maxCUSize, minCUSize]. Experimental, default: maxCUSize */
uint32_t qgSize;
/* internally enable if tune grain is set */
int bEnableGrain;
/* sets a hard upper limit on QP */
int qpMax;
/* sets a hard lower limit on QP */
int qpMin;
/* internally enable if tune grain is set */
int bEnableConstVbv;
} rc;
/*== Video Usability Information ==*/
struct
{
/* Aspect ratio idc to be added to the VUI. The default is 0 indicating
* the apsect ratio is unspecified. If set to X265_EXTENDED_SAR then
* sarWidth and sarHeight must also be set */
int aspectRatioIdc;
/* Sample Aspect Ratio width in arbitrary units to be added to the VUI
* only if aspectRatioIdc is set to X265_EXTENDED_SAR. This is the width
* of an individual pixel. If this is set then sarHeight must also be set */
int sarWidth;
/* Sample Aspect Ratio height in arbitrary units to be added to the VUI.
* only if aspectRatioIdc is set to X265_EXTENDED_SAR. This is the width
* of an individual pixel. If this is set then sarWidth must also be set */
int sarHeight;
/* Enable overscan info present flag in the VUI. If this is set then
* bEnabledOverscanAppropriateFlag will be added to the VUI. The default
* is false */
int bEnableOverscanInfoPresentFlag;
/* Enable overscan appropriate flag. The status of this flag is added
* to the VUI only if bEnableOverscanInfoPresentFlag is set. If this
* flag is set then cropped decoded pictures may be output for display.
* The default is false */
int bEnableOverscanAppropriateFlag;
/* Video signal type present flag of the VUI. If this is set then
* videoFormat, bEnableVideoFullRangeFlag and
* bEnableColorDescriptionPresentFlag will be added to the VUI. The
* default is false */
int bEnableVideoSignalTypePresentFlag;
/* Video format of the source video. 0 = component, 1 = PAL, 2 = NTSC,
* 3 = SECAM, 4 = MAC, 5 = unspecified video format is the default */
int videoFormat;
/* Video full range flag indicates the black level and range of the luma
* and chroma signals as derived from E′Y, E′PB, and E′PR or E′R, E′G,
* and E′B real-valued component signals. The default is false */
int bEnableVideoFullRangeFlag;
/* Color description present flag in the VUI. If this is set then
* color_primaries, transfer_characteristics and matrix_coeffs are to be
* added to the VUI. The default is false */
int bEnableColorDescriptionPresentFlag;
/* Color primaries holds the chromacity coordinates of the source
* primaries. The default is 2 */
int colorPrimaries;
/* Transfer characteristics indicates the opto-electronic transfer
* characteristic of the source picture. The default is 2 */
int transferCharacteristics;
/* Matrix coefficients used to derive the luma and chroma signals from
* the red, blue and green primaries. The default is 2 */
int matrixCoeffs;
/* Chroma location info present flag adds chroma_sample_loc_type_top_field and
* chroma_sample_loc_type_bottom_field to the VUI. The default is false */
int bEnableChromaLocInfoPresentFlag;
/* Chroma sample location type top field holds the chroma location in
* the top field. The default is 0 */
int chromaSampleLocTypeTopField;
/* Chroma sample location type bottom field holds the chroma location in
* the bottom field. The default is 0 */
int chromaSampleLocTypeBottomField;
/* Default display window flag adds def_disp_win_left_offset,
* def_disp_win_right_offset, def_disp_win_top_offset and
* def_disp_win_bottom_offset to the VUI. The default is false */
int bEnableDefaultDisplayWindowFlag;
/* Default display window left offset holds the left offset with the
* conformance cropping window to further crop the displayed window */
int defDispWinLeftOffset;
/* Default display window right offset holds the right offset with the
* conformance cropping window to further crop the displayed window */
int defDispWinRightOffset;
/* Default display window top offset holds the top offset with the
* conformance cropping window to further crop the displayed window */
int defDispWinTopOffset;
/* Default display window bottom offset holds the bottom offset with the
* conformance cropping window to further crop the displayed window */
int defDispWinBottomOffset;
} vui;
/* SMPTE ST 2086 mastering display color volume SEI info, specified as a
* string which is parsed when the stream header SEI are emitted. The string
* format is "G(%hu,%hu)B(%hu,%hu)R(%hu,%hu)WP(%hu,%hu)L(%u,%u)" where %hu
* are unsigned 16bit integers and %u are unsigned 32bit integers. The SEI
* includes X,Y display primaries for RGB channels, white point X,Y and
* max,min luminance values. */
const char* masteringDisplayColorVolume;
/* Maximum Content light level(MaxCLL), specified as integer that indicates the
* maximum pixel intensity level in units of 1 candela per square metre of the
* bitstream. x265 will also calculate MaxCLL programmatically from the input
* pixel values and set in the Content light level info SEI */
uint16_t maxCLL;
/* Maximum Frame Average Light Level(MaxFALL), specified as integer that indicates
* the maximum frame average intensity level in units of 1 candela per square
* metre of the bitstream. x265 will also calculate MaxFALL programmatically
* from the input pixel values and set in the Content light level info SEI */
uint16_t maxFALL;
/* Minimum luma level of input source picture, specified as a integer which
* would automatically increase any luma values below the specified --min-luma
* value to that value. */
uint16_t minLuma;
/* Maximum luma level of input source picture, specified as a integer which
* would automatically decrease any luma values above the specified --max-luma
* value to that value. */
uint16_t maxLuma;
/* Maximum of the picture order count */
int log2MaxPocLsb;
/* Emit VUI Timing info, an optional VUI field */
int bEmitVUITimingInfo;
/* Emit HRD Timing info */
int bEmitVUIHRDInfo;
/* Maximum count of Slices of picture, the value range is [1, maximum rows] */
unsigned int maxSlices;
/* Optimize QP in PPS based on statistics from prevvious GOP*/
int bOptQpPPS;
/* Opitmize ref list length in PPS based on stats from previous GOP*/
int bOptRefListLengthPPS;
/* Enable storing commonly RPS in SPS in multi pass mode */
int bMultiPassOptRPS;
/* This value represents the percentage difference between the inter cost and
* intra cost of a frame used in scenecut detection. Default 5. */
double scenecutBias;
/* Use multiple worker threads dedicated to doing only lookahead instead of sharing
* the worker threads with Frame Encoders. A dedicated lookahead threadpool is created with the
* specified number of worker threads. This can range from 0 upto half the
* hardware threads available for encoding. Using too many threads for lookahead can starve
* resources for frame Encoder and can harm performance. Default is 0 - disabled. */
int lookaheadThreads;
/* Optimize CU level QPs to signal consistent deltaQPs in frame for rd level > 4 */
int bOptCUDeltaQP;
/* Refine analysis in multipass ratecontrol based on analysis information stored */
int analysisMultiPassRefine;
/* Refine analysis in multipass ratecontrol based on distortion data stored */
int analysisMultiPassDistortion;
/* Adaptive Quantization based on relative motion */
int bAQMotion;
/* SSIM based RDO, based on residual divisive normalization scheme. Used for mode
* selection during analysis of CTUs, can achieve significant gain in terms of
* objective quality metrics SSIM and PSNR */
int bSsimRd;
/* Increase RD at points where bitrate drops due to vbv. Default 0 */
double dynamicRd;
/* Enables the emitting of HDR SEI packets which contains HDR-specific params.
* Auto-enabled when max-cll, max-fall, or mastering display info is specified.
* Default is disabled */
int bEmitHDRSEI;
/* Enable luma and chroma offsets for HDR/WCG content.
* Default is disabled */
int bHDROpt;
/* A value between 1 and 10 (both inclusive) determines the level of
* information stored/reused in analysis save/load. Higher the refine
* level higher the information stored/reused. Default is 5 */
int analysisReuseLevel;
/* Limit Sample Adaptive Offset filter computation by early terminating SAO
* process based on inter prediction mode, CTU spatial-domain correlations,
* and relations between luma and chroma */
int bLimitSAO;
/* File containing the tone mapping information */
const char* toneMapFile;
/* Insert tone mapping information only for IDR frames and when the
* tone mapping information changes. */
int bDhdr10opt;
/* Determine how x265 react to the content information recieved through the API */
int bCTUInfo;
/* Use ratecontrol statistics from pic_in, if available*/
int bUseRcStats;
/* Factor by which input video is scaled down for analysis save mode. Default is 0 */
int scaleFactor;
/* Enable intra refinement in load mode*/
int intraRefine;
/* Enable inter refinement in load mode*/
int interRefine;
/* Enable motion vector refinement in load mode*/
int mvRefine;
/* Log of maximum CTU size */
uint32_t maxLog2CUSize;
/* Actual CU depth with respect to config depth */
uint32_t maxCUDepth;
/* CU depth with respect to maximum transform size */
uint32_t unitSizeDepth;
/* Number of 4x4 units in maximum CU size */
uint32_t num4x4Partitions;
/* Specify if analysis mode uses file for data reuse */
int bUseAnalysisFile;
/* File pointer for csv log */
FILE* csvfpt;
/* Force flushing the frames from encoder */
int forceFlush;
/* Enable skipping split RD analysis when sum of split CU rdCost larger than none split CU rdCost for Intra CU */
int bEnableSplitRdSkip;
/* Disable lookahead */
int bDisableLookahead;
/* Use low-pass subband dct approximation
* This DCT approximation is less computational intensive and gives results close to standard DCT */
int bLowPassDct;
/* Sets the portion of the decode buffer that must be available after all the
* specified frames have been inserted into the decode buffer. If it is less
* than 1, then the final buffer available is vbv-end * vbvBufferSize. Otherwise,
* it is interpreted as the final buffer available in kbits. Default 0 (disabled) */
double vbvBufferEnd;
/* Frame from which qp has to be adjusted to hit final decode buffer emptiness.
* Specified as a fraction of the total frames. Default 0 */
double vbvEndFrameAdjust;
/* Reuse MV information obtained through API */
int bAnalysisType;
/* Allow the encoder to have a copy of the planes of x265_picture in Frame */
int bCopyPicToFrame;
/*Number of frames for GOP boundary decision lookahead.If a scenecut frame is found
* within this from the gop boundary set by keyint, the GOP will be extented until such a point,
* otherwise the GOP will be terminated as set by keyint*/
int gopLookahead;
/*Write per-frame analysis information into analysis buffers. Default disabled. */
const char* analysisSave;
/* Read analysis information into analysis buffer and use this analysis information
* to reduce the amount of work the encoder must perform. Default disabled. */
const char* analysisLoad;
/*Number of RADL pictures allowed in front of IDR*/
int radl;
/* This value controls the maximum AU size defined in specification
* It represents the percentage of maximum AU size used.
* Default is 1 (which is 100%). Range is 0.5 to 1. */
double maxAUSizeFactor;
/* Enables the emission of a Recovery Point SEI with the stream headers
* at each IDR frame describing poc of the recovery point, exact matching flag
* and broken link flag. Default is disabled. */
int bEmitIDRRecoverySEI;
/* Dynamically change refine-inter at block level*/
int bDynamicRefine;
/* Enable writing all SEI messgaes in one single NAL instead of mul*/
int bSingleSeiNal;
/* First frame of the chunk. Frames preceeding this in display order will
* be encoded, however, they will be discarded in the bitstream.
* Default 0 (disabled). */
int chunkStart;
/* Last frame of the chunk. Frames following this in display order will be
* used in taking lookahead decisions, but, they will not be encoded.
* Default 0 (disabled). */
int chunkEnd;
/* File containing base64 encoded SEI messages in POC order */
const char* naluFile;
/* Generate bitstreams confirming to the specified dolby vision profile,
* note that 0x7C01 makes RPU appear to be an unspecified NAL type in
* HEVC stream. if BL is backward compatible, Dolby Vision single
* layer VES will be equivalent to a backward compatible BL VES on legacy
* device as RPU will be ignored. Default 0 (disabled) */
int dolbyProfile;
/* Set concantenation flag for the first keyframe in the HRD buffering period SEI. */
int bEnableHRDConcatFlag;
/* Store/normalize ctu distortion in analysis-save/load. Ranges from 0 - 1.
* 0 - Disabled. 1 - Save/Load ctu distortion to/from the file specified
* analysis-save/load. Default 0. */
int ctuDistortionRefine;
/* Enable SVT HEVC Encoder */
int bEnableSvtHevc;
/* SVT-HEVC param structure. For internal use when SVT HEVC encoder is enabled */
void* svtHevcParam;
/* Detect fade-in regions. Enforces I-slice for the brightest point.
Re-init RC history at that point in ABR mode. Default is disabled. */
int bEnableFades;
/* Enable field coding */
int bField;
/*Emit content light level info SEI*/
int bEmitCLL;
} x265_param;
/* x265_param_alloc:
* Allocates an x265_param instance. The returned param structure is not
* special in any way, but using this method together with x265_param_free()
* and x265_param_parse() to set values by name allows the application to treat
* x265_param as an opaque data struct for version safety */
x265_param *x265_param_alloc(void);
/* x265_param_free:
* Use x265_param_free() to release storage for an x265_param instance
* allocated by x265_param_alloc() */
void x265_param_free(x265_param *);
/* x265_param_default:
* Initialize an x265_param structure to default values */
void x265_param_default(x265_param *param);
/* x265_param_parse:
* set one parameter by name.
* returns 0 on success, or returns one of the following errors.
* note: BAD_VALUE occurs only if it can't even parse the value,
* numerical range is not checked until x265_encoder_open().
* value=NULL means "true" for boolean options, but is a BAD_VALUE for non-booleans. */
#define X265_PARAM_BAD_NAME (-1)
#define X265_PARAM_BAD_VALUE (-2)
int x265_param_parse(x265_param *p, const char *name, const char *value);
x265_zone *x265_zone_alloc(int zoneCount, int isZoneFile);
void x265_zone_free(x265_param *param);
int x265_zone_param_parse(x265_param* p, const char* name, const char* value);
static const char * const x265_profile_names[] = {
/* HEVC v1 */
"main", "main10", "mainstillpicture", /* alias */ "msp",
/* HEVC v2 (Range Extensions) */
"main-intra", "main10-intra",
"main444-8", "main444-intra", "main444-stillpicture",
"main422-10", "main422-10-intra",
"main444-10", "main444-10-intra",
"main12", "main12-intra",
"main422-12", "main422-12-intra",
"main444-12", "main444-12-intra",
"main444-16-intra", "main444-16-stillpicture", /* Not Supported! */
0
};
/* x265_param_apply_profile:
* Applies the restrictions of the given profile. (one of x265_profile_names)
* (can be NULL, in which case the function will do nothing)
* Note: the detected profile can be lower than the one specified to this
* function. This function will force the encoder parameters to fit within
* the specified profile, or fail if that is impossible.
* returns 0 on success, negative on failure (e.g. invalid profile name). */
int x265_param_apply_profile(x265_param *, const char *profile);
/* x265_param_default_preset:
* The same as x265_param_default, but also use the passed preset and tune
* to modify the default settings.
* (either can be NULL, which implies no preset or no tune, respectively)
*
* Currently available presets are, ordered from fastest to slowest: */
static const char * const x265_preset_names[] = { "ultrafast", "superfast", "veryfast", "faster", "fast", "medium", "slow", "slower", "veryslow", "placebo", 0 };
/* The presets can also be indexed numerically, as in:
* x265_param_default_preset( ¶m, "3", ... )
* with ultrafast mapping to "0" and placebo mapping to "9". This mapping may
* of course change if new presets are added in between, but will always be
* ordered from fastest to slowest.
*
* Warning: the speed of these presets scales dramatically. Ultrafast is a full
* 100 times faster than placebo!
*
* Currently available tunings are: */
static const char * const x265_tune_names[] = { "psnr", "ssim", "grain", "zerolatency", "fastdecode", "animation", 0 };
/* returns 0 on success, negative on failure (e.g. invalid preset/tune name). */
int x265_param_default_preset(x265_param *, const char *preset, const char *tune);
/* x265_picture_alloc:
* Allocates an x265_picture instance. The returned picture structure is not
* special in any way, but using this method together with x265_picture_free()
* and x265_picture_init() allows some version safety. New picture fields will
* always be added to the end of x265_picture */
x265_picture *x265_picture_alloc(void);
/* x265_picture_free:
* Use x265_picture_free() to release storage for an x265_picture instance
* allocated by x265_picture_alloc() */
void x265_picture_free(x265_picture *);
/* x265_picture_init:
* Initialize an x265_picture structure to default values. It sets the pixel
* depth and color space to the encoder's internal values and sets the slice
* type to auto - so the lookahead will determine slice type. */
void x265_picture_init(x265_param *param, x265_picture *pic);
/* x265_max_bit_depth:
* Specifies the numer of bits per pixel that x265 uses internally to
* represent a pixel, and the bit depth of the output bitstream.
* param->internalBitDepth must be set to this value. x265_max_bit_depth
* will be 8 for default builds, 10 for HIGH_BIT_DEPTH builds. */
X265_API extern const int x265_max_bit_depth;
/* x265_version_str:
* A static string containing the version of this compiled x265 library */
X265_API extern const char *x265_version_str;
/* x265_build_info:
* A static string describing the compiler and target architecture */
X265_API extern const char *x265_build_info_str;
/* x265_alloc_analysis_data:
* Allocate memory for the x265_analysis_data object's internal structures. */
void x265_alloc_analysis_data(x265_param *param, x265_analysis_data* analysis);
/*
* Free the allocated memory for x265_analysis_data object's internal structures. */
void x265_free_analysis_data(x265_param *param, x265_analysis_data* analysis);
/* Force a link error in the case of linking against an incompatible API version.
* Glue #defines exist to force correct macro expansion; the final output of the macro
* is x265_encoder_open_##X265_BUILD (for purposes of dlopen). */
#define x265_encoder_glue1(x, y) x ## y
#define x265_encoder_glue2(x, y) x265_encoder_glue1(x, y)
#define x265_encoder_open x265_encoder_glue2(x265_encoder_open_, X265_BUILD)
/* x265_encoder_open:
* create a new encoder handler, all parameters from x265_param are copied */
x265_encoder* x265_encoder_open(x265_param *);
/* x265_encoder_parameters:
* copies the current internal set of parameters to the pointer provided
* by the caller. useful when the calling application needs to know
* how x265_encoder_open has changed the parameters.
* note that the data accessible through pointers in the returned param struct
* (e.g. filenames) should not be modified by the calling application. */
void x265_encoder_parameters(x265_encoder *, x265_param *);
/* x265_encoder_headers:
* return the SPS and PPS that will be used for the whole stream.
* *pi_nal is the number of NAL units outputted in pp_nal.
* returns negative on error, total byte size of payload data on success
* the payloads of all output NALs are guaranteed to be sequential in memory. */
int x265_encoder_headers(x265_encoder *, x265_nal **pp_nal, uint32_t *pi_nal);
/* x265_encoder_encode:
* encode one picture.
* *pi_nal is the number of NAL units outputted in pp_nal.
* returns negative on error, 1 if a picture and access unit were output,
* or zero if the encoder pipeline is still filling or is empty after flushing.
* the payloads of all output NALs are guaranteed to be sequential in memory.
* To flush the encoder and retrieve delayed output pictures, pass pic_in as NULL.
* Once flushing has begun, all subsequent calls must pass pic_in as NULL. */
int x265_encoder_encode(x265_encoder *encoder, x265_nal **pp_nal, uint32_t *pi_nal, x265_picture *pic_in, x265_picture *pic_out);
/* x265_encoder_reconfig:
* various parameters from x265_param are copied.
* this takes effect immediately, on whichever frame is encoded next;
* returns 0 on success, negative on parameter validation error.
*
* not all parameters can be changed; see the actual function for a
* detailed breakdown. since not all parameters can be changed, moving
* from preset to preset may not always fully copy all relevant parameters,
* but should still work usably in practice. however, more so than for
* other presets, many of the speed shortcuts used in ultrafast cannot be
* switched out of; using reconfig to switch between ultrafast and other
* presets is not recommended without a more fine-grained breakdown of
* parameters to take this into account. */
int x265_encoder_reconfig(x265_encoder *, x265_param *);
/* x265_encoder_get_stats:
* returns encoder statistics */
void x265_encoder_get_stats(x265_encoder *encoder, x265_stats *, uint32_t statsSizeBytes);
/* x265_encoder_log:
* write a line to the configured CSV file. If a CSV filename was not
* configured, or file open failed, this function will perform no write. */
void x265_encoder_log(x265_encoder *encoder, int argc, char **argv);
/* x265_encoder_close:
* close an encoder handler */
void x265_encoder_close(x265_encoder *);
/* x265_encoder_intra_refresh:
* If an intra refresh is not in progress, begin one with the next P-frame.
* If an intra refresh is in progress, begin one as soon as the current one finishes.
* Requires bIntraRefresh to be set.
*
* Useful for interactive streaming where the client can tell the server that packet loss has
* occurred. In this case, keyint can be set to an extremely high value so that intra refreshes
* occur only when calling x265_encoder_intra_refresh.
*
* In multi-pass encoding, if x265_encoder_intra_refresh is called differently in each pass,
* behavior is undefined.
*
* Should not be called during an x265_encoder_encode. */
int x265_encoder_intra_refresh(x265_encoder *);
/* x265_encoder_ctu_info:
* Copy CTU information such as ctu address and ctu partition structure of all
* CTUs in each frame. The function is invoked only if "--ctu-info" is enabled and
* the encoder will wait for this copy to complete if enabled.
*/
int x265_encoder_ctu_info(x265_encoder *, int poc, x265_ctu_info_t** ctu);
/* x265_get_slicetype_poc_and_scenecut:
* get the slice type, poc and scene cut information for the current frame,
* returns negative on error, 0 when access unit were output.
* This API must be called after(poc >= lookaheadDepth + bframes + 2) condition check */
int x265_get_slicetype_poc_and_scenecut(x265_encoder *encoder, int *slicetype, int *poc, int* sceneCut);
/* x265_get_ref_frame_list:
* returns negative on error, 0 when access unit were output.
* This API must be called after(poc >= lookaheadDepth + bframes + 2) condition check */
int x265_get_ref_frame_list(x265_encoder *encoder, x265_picyuv**, x265_picyuv**, int, int, int*, int*);
/* x265_set_analysis_data:
* set the analysis data. The incoming analysis_data structure is assumed to be AVC-sized blocks.
* returns negative on error, 0 access unit were output. */
int x265_set_analysis_data(x265_encoder *encoder, x265_analysis_data *analysis_data, int poc, uint32_t cuBytes);
/* x265_cleanup:
* release library static allocations, reset configured CTU size */
void x265_cleanup(void);
/* Open a CSV log file. On success it returns a file handle which must be passed
* to x265_csvlog_frame() and/or x265_csvlog_encode(). The file handle must be
* closed by the caller using fclose(). If csv-loglevel is 0, then no frame logging
* header is written to the file. This function will return NULL if it is unable
* to open the file for write or if it detects a structure size skew */
FILE* x265_csvlog_open(const x265_param *);
/* Log frame statistics to the CSV file handle. csv-loglevel should have been non-zero
* in the call to x265_csvlog_open() if this function is called. */
void x265_csvlog_frame(const x265_param *, const x265_picture *);
/* Log final encode statistics to the CSV file handle. 'argc' and 'argv' are
* intended to be command line arguments passed to the encoder. padx and pady are
* padding offsets for conformance and can be given from sps settings. Encode
* statistics should be queried from the encoder just prior to closing it. */
void x265_csvlog_encode(const x265_param*, const x265_stats *, int padx, int pady, int argc, char** argv);
/* In-place downshift from a bit-depth greater than 8 to a bit-depth of 8, using
* the residual bits to dither each row. */
void x265_dither_image(x265_picture *, int picWidth, int picHeight, int16_t *errorBuf, int bitDepth);
#if ENABLE_LIBVMAF
/* x265_calculate_vmafScore:
* returns VMAF score for the input video.
* This api must be called only after encoding was done. */
double x265_calculate_vmafscore(x265_param*, x265_vmaf_data*);
/* x265_calculate_vmaf_framelevelscore:
* returns VMAF score for each frame in a given input video. */
double x265_calculate_vmaf_framelevelscore(x265_vmaf_framedata*);
/* x265_vmaf_encoder_log:
* write a line to the configured CSV file. If a CSV filename was not
* configured, or file open failed, this function will perform no write.
* This api will be called only when ENABLE_LIBVMAF cmake option is set */
void x265_vmaf_encoder_log(x265_encoder *encoder, int argc, char **argv, x265_param*, x265_vmaf_data*);
#endif
#define X265_MAJOR_VERSION 1
/* === Multi-lib API ===
* By using this method to gain access to the libx265 interfaces, you allow run-
* time selection between various available libx265 libraries based on the
* encoder parameters. The most likely use case is to choose between Main and
* Main10 builds of libx265. */
typedef struct x265_api
{
int api_major_version; /* X265_MAJOR_VERSION */
int api_build_number; /* X265_BUILD (soname) */
int sizeof_param; /* sizeof(x265_param) */
int sizeof_picture; /* sizeof(x265_picture) */
int sizeof_analysis_data; /* sizeof(x265_analysis_data) */
int sizeof_zone; /* sizeof(x265_zone) */
int sizeof_stats; /* sizeof(x265_stats) */
int bit_depth;
const char* version_str;
const char* build_info_str;
/* libx265 public API functions, documented above with x265_ prefixes */
x265_param* (*param_alloc)(void);
void (*param_free)(x265_param*);
void (*param_default)(x265_param*);
int (*param_parse)(x265_param*, const char*, const char*);
int (*param_apply_profile)(x265_param*, const char*);
int (*param_default_preset)(x265_param*, const char*, const char *);
x265_picture* (*picture_alloc)(void);
void (*picture_free)(x265_picture*);
void (*picture_init)(x265_param*, x265_picture*);
x265_encoder* (*encoder_open)(x265_param*);
void (*encoder_parameters)(x265_encoder*, x265_param*);
int (*encoder_reconfig)(x265_encoder*, x265_param*);
int (*encoder_headers)(x265_encoder*, x265_nal**, uint32_t*);
int (*encoder_encode)(x265_encoder*, x265_nal**, uint32_t*, x265_picture*, x265_picture*);
void (*encoder_get_stats)(x265_encoder*, x265_stats*, uint32_t);
void (*encoder_log)(x265_encoder*, int, char**);
void (*encoder_close)(x265_encoder*);
void (*cleanup)(void);
int sizeof_frame_stats; /* sizeof(x265_frame_stats) */
int (*encoder_intra_refresh)(x265_encoder*);
int (*encoder_ctu_info)(x265_encoder*, int, x265_ctu_info_t**);
int (*get_slicetype_poc_and_scenecut)(x265_encoder*, int*, int*, int*);
int (*get_ref_frame_list)(x265_encoder*, x265_picyuv**, x265_picyuv**, int, int, int*, int*);
FILE* (*csvlog_open)(const x265_param*);
void (*csvlog_frame)(const x265_param*, const x265_picture*);
void (*csvlog_encode)(const x265_param*, const x265_stats *, int, int, int, char**);
void (*dither_image)(x265_picture*, int, int, int16_t*, int);
int (*set_analysis_data)(x265_encoder *encoder, x265_analysis_data *analysis_data, int poc, uint32_t cuBytes);
#if ENABLE_LIBVMAF
double (*calculate_vmafscore)(x265_param *, x265_vmaf_data *);
double (*calculate_vmaf_framelevelscore)(x265_vmaf_framedata *);
void (*vmaf_encoder_log)(x265_encoder*, int, char**, x265_param *, x265_vmaf_data *);
#endif
int (*zone_param_parse)(x265_param*, const char*, const char*);
/* add new pointers to the end, or increment X265_MAJOR_VERSION */
} x265_api;
/* Force a link error in the case of linking against an incompatible API version.
* Glue #defines exist to force correct macro expansion; the final output of the macro
* is x265_api_get_##X265_BUILD (for purposes of dlopen). */
#define x265_api_glue1(x, y) x ## y
#define x265_api_glue2(x, y) x265_api_glue1(x, y)
#define x265_api_get x265_api_glue2(x265_api_get_, X265_BUILD)
/* x265_api_get:
* Retrieve the programming interface for a linked x265 library.
* May return NULL if no library is available that supports the
* requested bit depth. If bitDepth is 0 the function is guarunteed
* to return a non-NULL x265_api pointer, from the linked libx265.
*
* If the requested bitDepth is not supported by the linked libx265,
* it will attempt to dynamically bind x265_api_get() from a shared
* library with an appropriate name:
* 8bit: libx265_main.so
* 10bit: libx265_main10.so
* Obviously the shared library file extension is platform specific */
const x265_api* x265_api_get(int bitDepth);
/* x265_api_query:
* Retrieve the programming interface for a linked x265 library, like
* x265_api_get(), except this function accepts X265_BUILD as the second
* argument rather than using the build number as part of the function name.
* Applications which dynamically link to libx265 can use this interface to
* query the library API and achieve a relative amount of version skew
* flexibility. The function may return NULL if the library determines that
* the apiVersion that your application was compiled against is not compatible
* with the library you have linked with.
*
* api_major_version will be incremented any time non-backward compatible
* changes are made to any public structures or functions. If
* api_major_version does not match X265_MAJOR_VERSION from the x265.h your
* application compiled against, your application must not use the returned
* x265_api pointer.
*
* Users of this API *must* also validate the sizes of any structures which
* are not treated as opaque in application code. For instance, if your
* application dereferences a x265_param pointer, then it must check that
* api->sizeof_param matches the sizeof(x265_param) that your application
* compiled with. */
const x265_api* x265_api_query(int bitDepth, int apiVersion, int* err);
#define X265_API_QUERY_ERR_NONE 0 /* returned API pointer is non-NULL */
#define X265_API_QUERY_ERR_VER_REFUSED 1 /* incompatible version skew */
#define X265_API_QUERY_ERR_LIB_NOT_FOUND 2 /* libx265_main10 not found, for ex */
#define X265_API_QUERY_ERR_FUNC_NOT_FOUND 3 /* unable to bind x265_api_query */
#define X265_API_QUERY_ERR_WRONG_BITDEPTH 4 /* libx265_main10 not 10bit, for ex */
static const char * const x265_api_query_errnames[] = {
"api queried from libx265",
"libx265 version is not compatible with this application",
"unable to bind a libx265 with requested bit depth",
"unable to bind x265_api_query from libx265",
"libx265 has an invalid bitdepth"
};
#ifdef __cplusplus
}
#endif
#endif // X265_H