https://github.com/Kitware/CMake
Tip revision: 8738eba336d0f89cd3c183fe32413283abe9140d authored by Brad King on 31 May 2018, 13:04:20 UTC
CMake 3.11.3
CMake 3.11.3
Tip revision: 8738eba
CPackRPM.cmake
# Distributed under the OSI-approved BSD 3-Clause License. See accompanying
# file Copyright.txt or https://cmake.org/licensing for details.
#.rst:
# CPackRPM
# --------
#
# The built in (binary) CPack RPM generator (Unix only)
#
# Variables specific to CPack RPM generator
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
#
# CPackRPM may be used to create RPM packages using :module:`CPack`.
# CPackRPM is a :module:`CPack` generator thus it uses the ``CPACK_XXX``
# variables used by :module:`CPack`.
#
# CPackRPM has specific features which are controlled by the specifics
# :code:`CPACK_RPM_XXX` variables.
#
# :code:`CPACK_RPM_<COMPONENT>_XXXX` variables may be used in order to have
# **component** specific values. Note however that ``<COMPONENT>`` refers to the
# **grouping name** written in upper case. It may be either a component name or
# a component GROUP name. Usually those variables correspond to RPM spec file
# entities. One may find information about spec files here
# http://www.rpm.org/wiki/Docs
#
# .. note::
#
# `<COMPONENT>` part of variables is preferred to be in upper case (for e.g. if
# component is named `foo` then use `CPACK_RPM_FOO_XXXX` variable name format)
# as is with other `CPACK_<COMPONENT>_XXXX` variables.
# For the purposes of back compatibility (CMake/CPack version 3.5 and lower)
# support for same cased component (e.g. `fOo` would be used as
# `CPACK_RPM_fOo_XXXX`) is still supported for variables defined in older
# versions of CMake/CPack but is not guaranteed for variables that
# will be added in the future. For the sake of back compatibility same cased
# component variables also override upper cased versions where both are
# present.
#
# Here are some CPackRPM wiki resources that are here for historic reasons and
# are no longer maintained but may still prove useful:
#
# - https://cmake.org/Wiki/CMake:CPackConfiguration
# - https://cmake.org/Wiki/CMake:CPackPackageGenerators#RPM_.28Unix_Only.29
#
# List of CPackRPM specific variables:
#
# .. variable:: CPACK_RPM_COMPONENT_INSTALL
#
# Enable component packaging for CPackRPM
#
# * Mandatory : NO
# * Default : OFF
#
# If enabled (ON) multiple packages are generated. By default a single package
# containing files of all components is generated.
#
# .. variable:: CPACK_RPM_PACKAGE_SUMMARY
# CPACK_RPM_<component>_PACKAGE_SUMMARY
#
# The RPM package summary.
#
# * Mandatory : YES
# * Default : :variable:`CPACK_PACKAGE_DESCRIPTION_SUMMARY`
#
# .. variable:: CPACK_RPM_PACKAGE_NAME
# CPACK_RPM_<component>_PACKAGE_NAME
#
# The RPM package name.
#
# * Mandatory : YES
# * Default : :variable:`CPACK_PACKAGE_NAME`
#
# .. variable:: CPACK_RPM_FILE_NAME
# CPACK_RPM_<component>_FILE_NAME
#
# Package file name.
#
# * Mandatory : YES
# * Default : ``<CPACK_PACKAGE_FILE_NAME>[-<component>].rpm`` with spaces
# replaced by '-'
#
# This may be set to ``RPM-DEFAULT`` to allow rpmbuild tool to generate package
# file name by itself.
# Alternatively provided package file name must end with ``.rpm`` suffix.
#
# .. note::
#
# By using user provided spec file, rpm macro extensions such as for
# generating debuginfo packages or by simply using multiple components more
# than one rpm file may be generated, either from a single spec file or from
# multiple spec files (each component execution produces it's own spec file).
# In such cases duplicate file names may occur as a result of this variable
# setting or spec file content structure. Duplicate files get overwritten
# and it is up to the packager to set the variables in a manner that will
# prevent such errors.
#
# .. variable:: CPACK_RPM_MAIN_COMPONENT
#
# Main component that is packaged without component suffix.
#
# * Mandatory : NO
# * Default : -
#
# This variable can be set to any component or group name so that component or
# group rpm package is generated without component suffix in filename and
# package name.
#
# .. variable:: CPACK_RPM_PACKAGE_EPOCH
#
# The RPM package epoch
#
# * Mandatory : No
# * Default : -
#
# Optional number that should be incremented when changing versioning schemas
# or fixing mistakes in the version numbers of older packages.
#
# .. variable:: CPACK_RPM_PACKAGE_VERSION
#
# The RPM package version.
#
# * Mandatory : YES
# * Default : :variable:`CPACK_PACKAGE_VERSION`
#
# .. variable:: CPACK_RPM_PACKAGE_ARCHITECTURE
# CPACK_RPM_<component>_PACKAGE_ARCHITECTURE
#
# The RPM package architecture.
#
# * Mandatory : YES
# * Default : Native architecture output by ``uname -m``
#
# This may be set to ``noarch`` if you know you are building a noarch package.
#
# .. variable:: CPACK_RPM_PACKAGE_RELEASE
#
# The RPM package release.
#
# * Mandatory : YES
# * Default : 1
#
# This is the numbering of the RPM package itself, i.e. the version of the
# packaging and not the version of the content (see
# :variable:`CPACK_RPM_PACKAGE_VERSION`). One may change the default value if
# the previous packaging was buggy and/or you want to put here a fancy Linux
# distro specific numbering.
#
# .. note::
#
# This is the string that goes into the RPM ``Release:`` field. Some distros
# (e.g. Fedora, CentOS) require ``1%{?dist}`` format and not just a number.
# ``%{?dist}`` part can be added by setting :variable:`CPACK_RPM_PACKAGE_RELEASE_DIST`.
#
# .. variable:: CPACK_RPM_PACKAGE_RELEASE_DIST
#
# The dist tag that is added RPM ``Release:`` field.
#
# * Mandatory : NO
# * Default : OFF
#
# This is the reported ``%{dist}`` tag from the current distribution or empty
# ``%{dist}`` if RPM macro is not set. If this variable is set then RPM
# ``Release:`` field value is set to ``${CPACK_RPM_PACKAGE_RELEASE}%{?dist}``.
#
# .. variable:: CPACK_RPM_PACKAGE_LICENSE
#
# The RPM package license policy.
#
# * Mandatory : YES
# * Default : "unknown"
#
# .. variable:: CPACK_RPM_PACKAGE_GROUP
# CPACK_RPM_<component>_PACKAGE_GROUP
#
# The RPM package group.
#
# * Mandatory : YES
# * Default : "unknown"
#
# .. variable:: CPACK_RPM_PACKAGE_VENDOR
#
# The RPM package vendor.
#
# * Mandatory : YES
# * Default : CPACK_PACKAGE_VENDOR if set or "unknown"
#
# .. variable:: CPACK_RPM_PACKAGE_URL
# CPACK_RPM_<component>_PACKAGE_URL
#
# The projects URL.
#
# * Mandatory : NO
# * Default : -
#
# .. variable:: CPACK_RPM_PACKAGE_DESCRIPTION
# CPACK_RPM_<component>_PACKAGE_DESCRIPTION
#
# RPM package description.
#
# * Mandatory : YES
# * Default : :variable:`CPACK_COMPONENT_<compName>_DESCRIPTION` (component
# based installers only) if set, :variable:`CPACK_PACKAGE_DESCRIPTION_FILE`
# if set or "no package description available"
#
# .. variable:: CPACK_RPM_COMPRESSION_TYPE
#
# RPM compression type.
#
# * Mandatory : NO
# * Default : -
#
# May be used to override RPM compression type to be used to build the
# RPM. For example some Linux distribution now default to lzma or xz
# compression whereas older cannot use such RPM. Using this one can enforce
# compression type to be used.
#
# Possible values are:
#
# - lzma
# - xz
# - bzip2
# - gzip
#
# .. variable:: CPACK_RPM_PACKAGE_AUTOREQ
# CPACK_RPM_<component>_PACKAGE_AUTOREQ
#
# RPM spec autoreq field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to enable (1, yes) or disable (0, no) automatic shared libraries
# dependency detection. Dependencies are added to requires list.
#
# .. note::
#
# By default automatic dependency detection is enabled by rpm generator.
#
# .. variable:: CPACK_RPM_PACKAGE_AUTOPROV
# CPACK_RPM_<component>_PACKAGE_AUTOPROV
#
# RPM spec autoprov field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to enable (1, yes) or disable (0, no) automatic listing of shared
# libraries that are provided by the package. Shared libraries are added to
# provides list.
#
# .. note::
#
# By default automatic provides detection is enabled by rpm generator.
#
# .. variable:: CPACK_RPM_PACKAGE_AUTOREQPROV
# CPACK_RPM_<component>_PACKAGE_AUTOREQPROV
#
# RPM spec autoreqprov field.
#
# * Mandatory : NO
# * Default : -
#
# Variable enables/disables autoreq and autoprov at the same time.
# See :variable:`CPACK_RPM_PACKAGE_AUTOREQ` and :variable:`CPACK_RPM_PACKAGE_AUTOPROV`
# for more details.
#
# .. note::
#
# By default automatic detection feature is enabled by rpm.
#
# .. variable:: CPACK_RPM_PACKAGE_REQUIRES
# CPACK_RPM_<component>_PACKAGE_REQUIRES
#
# RPM spec requires field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set RPM dependencies (requires). Note that you must enclose
# the complete requires string between quotes, for example::
#
# set(CPACK_RPM_PACKAGE_REQUIRES "python >= 2.5.0, cmake >= 2.8")
#
# The required package list of an RPM file could be printed with::
#
# rpm -qp --requires file.rpm
#
# .. variable:: CPACK_RPM_PACKAGE_CONFLICTS
# CPACK_RPM_<component>_PACKAGE_CONFLICTS
#
# RPM spec conflicts field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set negative RPM dependencies (conflicts). Note that you must
# enclose the complete requires string between quotes, for example::
#
# set(CPACK_RPM_PACKAGE_CONFLICTS "libxml2")
#
# The conflicting package list of an RPM file could be printed with::
#
# rpm -qp --conflicts file.rpm
#
# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PRE
# CPACK_RPM_<component>_PACKAGE_REQUIRES_PRE
#
# RPM spec requires(pre) field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set RPM preinstall dependencies (requires(pre)). Note that
# you must enclose the complete requires string between quotes, for example::
#
# set(CPACK_RPM_PACKAGE_REQUIRES_PRE "shadow-utils, initscripts")
#
# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POST
# CPACK_RPM_<component>_PACKAGE_REQUIRES_POST
#
# RPM spec requires(post) field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set RPM postinstall dependencies (requires(post)). Note that
# you must enclose the complete requires string between quotes, for example::
#
# set(CPACK_RPM_PACKAGE_REQUIRES_POST "shadow-utils, initscripts")
#
# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_POSTUN
# CPACK_RPM_<component>_PACKAGE_REQUIRES_POSTUN
#
# RPM spec requires(postun) field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set RPM postuninstall dependencies (requires(postun)). Note
# that you must enclose the complete requires string between quotes, for
# example::
#
# set(CPACK_RPM_PACKAGE_REQUIRES_POSTUN "shadow-utils, initscripts")
#
# .. variable:: CPACK_RPM_PACKAGE_REQUIRES_PREUN
# CPACK_RPM_<component>_PACKAGE_REQUIRES_PREUN
#
# RPM spec requires(preun) field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set RPM preuninstall dependencies (requires(preun)). Note that
# you must enclose the complete requires string between quotes, for example::
#
# set(CPACK_RPM_PACKAGE_REQUIRES_PREUN "shadow-utils, initscripts")
#
# .. variable:: CPACK_RPM_PACKAGE_SUGGESTS
# CPACK_RPM_<component>_PACKAGE_SUGGESTS
#
# RPM spec suggest field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set weak RPM dependencies (suggests). Note that you must
# enclose the complete requires string between quotes.
#
# .. variable:: CPACK_RPM_PACKAGE_PROVIDES
# CPACK_RPM_<component>_PACKAGE_PROVIDES
#
# RPM spec provides field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set RPM dependencies (provides). The provided package list
# of an RPM file could be printed with::
#
# rpm -qp --provides file.rpm
#
# .. variable:: CPACK_RPM_PACKAGE_OBSOLETES
# CPACK_RPM_<component>_PACKAGE_OBSOLETES
#
# RPM spec obsoletes field.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set RPM packages that are obsoleted by this one.
#
# .. variable:: CPACK_RPM_PACKAGE_RELOCATABLE
#
# build a relocatable RPM.
#
# * Mandatory : NO
# * Default : CPACK_PACKAGE_RELOCATABLE
#
# If this variable is set to TRUE or ON CPackRPM will try
# to build a relocatable RPM package. A relocatable RPM may
# be installed using::
#
# rpm --prefix or --relocate
#
# in order to install it at an alternate place see rpm(8). Note that
# currently this may fail if :variable:`CPACK_SET_DESTDIR` is set to ``ON``. If
# :variable:`CPACK_SET_DESTDIR` is set then you will get a warning message but
# if there is file installed with absolute path you'll get unexpected behavior.
#
# .. variable:: CPACK_RPM_SPEC_INSTALL_POST
#
# Deprecated - use :variable:`CPACK_RPM_POST_INSTALL_SCRIPT_FILE` instead.
#
# * Mandatory : NO
# * Default : -
# * Deprecated: YES
#
# This way of specifying post-install script is deprecated, use
# :variable:`CPACK_RPM_POST_INSTALL_SCRIPT_FILE`.
# May be used to set an RPM post-install command inside the spec file.
# For example setting it to ``/bin/true`` may be used to prevent
# rpmbuild to strip binaries.
#
# .. variable:: CPACK_RPM_SPEC_MORE_DEFINE
#
# RPM extended spec definitions lines.
#
# * Mandatory : NO
# * Default : -
#
# May be used to add any ``%define`` lines to the generated spec file.
#
# .. variable:: CPACK_RPM_PACKAGE_DEBUG
#
# Toggle CPackRPM debug output.
#
# * Mandatory : NO
# * Default : -
#
# May be set when invoking cpack in order to trace debug information
# during CPack RPM run. For example you may launch CPack like this::
#
# cpack -D CPACK_RPM_PACKAGE_DEBUG=1 -G RPM
#
# .. variable:: CPACK_RPM_USER_BINARY_SPECFILE
# CPACK_RPM_<componentName>_USER_BINARY_SPECFILE
#
# A user provided spec file.
#
# * Mandatory : NO
# * Default : -
#
# May be set by the user in order to specify a USER binary spec file
# to be used by CPackRPM instead of generating the file.
# The specified file will be processed by configure_file( @ONLY).
#
# .. variable:: CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
#
# Spec file template.
#
# * Mandatory : NO
# * Default : -
#
# If set CPack will generate a template for USER specified binary
# spec file and stop with an error. For example launch CPack like this::
#
# cpack -D CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE=1 -G RPM
#
# The user may then use this file in order to hand-craft is own
# binary spec file which may be used with
# :variable:`CPACK_RPM_USER_BINARY_SPECFILE`.
#
# .. variable:: CPACK_RPM_PRE_INSTALL_SCRIPT_FILE
# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE
#
# Path to file containing pre (un)install script.
#
# * Mandatory : NO
# * Default : -
#
# May be used to embed a pre (un)installation script in the spec file.
# The referred script file (or both) will be read and directly
# put after the ``%pre`` or ``%preun`` section
# If :variable:`CPACK_RPM_COMPONENT_INSTALL` is set to ON the (un)install
# script for each component can be overridden with
# ``CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE`` and
# ``CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE``.
# One may verify which scriptlet has been included with::
#
# rpm -qp --scripts package.rpm
#
# .. variable:: CPACK_RPM_POST_INSTALL_SCRIPT_FILE
# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE
#
# Path to file containing post (un)install script.
#
# * Mandatory : NO
# * Default : -
#
# May be used to embed a post (un)installation script in the spec file.
# The referred script file (or both) will be read and directly
# put after the ``%post`` or ``%postun`` section.
# If :variable:`CPACK_RPM_COMPONENT_INSTALL` is set to ON the (un)install
# script for each component can be overridden with
# ``CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE`` and
# ``CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE``.
# One may verify which scriptlet has been included with::
#
# rpm -qp --scripts package.rpm
#
# .. variable:: CPACK_RPM_USER_FILELIST
# CPACK_RPM_<COMPONENT>_USER_FILELIST
#
# * Mandatory : NO
# * Default : -
#
# May be used to explicitly specify ``%(<directive>)`` file line
# in the spec file. Like ``%config(noreplace)`` or any other directive
# that be found in the ``%files`` section. You can have multiple directives
# per line, as in ``%attr(600,root,root) %config(noreplace)``. Since
# CPackRPM is generating the list of files (and directories) the user
# specified files of the ``CPACK_RPM_<COMPONENT>_USER_FILELIST`` list will
# be removed from the generated list. If referring to directories do
# not add a trailing slash.
#
# .. variable:: CPACK_RPM_CHANGELOG_FILE
#
# RPM changelog file.
#
# * Mandatory : NO
# * Default : -
#
# May be used to embed a changelog in the spec file.
# The referred file will be read and directly put after the ``%changelog``
# section.
#
# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST
#
# list of path to be excluded.
#
# * Mandatory : NO
# * Default : /etc /etc/init.d /usr /usr/bin /usr/include /usr/lib
# /usr/libx32 /usr/lib64 /usr/share /usr/share/aclocal
# /usr/share/doc
#
# May be used to exclude path (directories or files) from the auto-generated
# list of paths discovered by CPack RPM. The default value contains a
# reasonable set of values if the variable is not defined by the user. If the
# variable is defined by the user then CPackRPM will NOT any of the default
# path. If you want to add some path to the default list then you can use
# :variable:`CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION` variable.
#
# .. variable:: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION
#
# additional list of path to be excluded.
#
# * Mandatory : NO
# * Default : -
#
# May be used to add more exclude path (directories or files) from the initial
# default list of excluded paths. See
# :variable:`CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST`.
#
# .. variable:: CPACK_RPM_RELOCATION_PATHS
#
# Packages relocation paths list.
#
# * Mandatory : NO
# * Default : -
#
# May be used to specify more than one relocation path per relocatable RPM.
# Variable contains a list of relocation paths that if relative are prefixed
# by the value of :variable:`CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX` or by the
# value of :variable:`CPACK_PACKAGING_INSTALL_PREFIX` if the component version
# is not provided.
# Variable is not component based as its content can be used to set a different
# path prefix for e.g. binary dir and documentation dir at the same time.
# Only prefixes that are required by a certain component are added to that
# component - component must contain at least one file/directory/symbolic link
# with :variable:`CPACK_RPM_RELOCATION_PATHS` prefix for a certain relocation
# path to be added. Package will not contain any relocation paths if there are
# no files/directories/symbolic links on any of the provided prefix locations.
# Packages that either do not contain any relocation paths or contain
# files/directories/symbolic links that are outside relocation paths print
# out an ``AUTHOR_WARNING`` that RPM will be partially relocatable.
#
# .. variable:: CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX
#
# Per component relocation path install prefix.
#
# * Mandatory : NO
# * Default : CPACK_PACKAGING_INSTALL_PREFIX
#
# May be used to set per component :variable:`CPACK_PACKAGING_INSTALL_PREFIX`
# for relocatable RPM packages.
#
# .. variable:: CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION
# CPACK_RPM_NO_<COMPONENT>_INSTALL_PREFIX_RELOCATION
#
# Removal of default install prefix from relocation paths list.
#
# * Mandatory : NO
# * Default : CPACK_PACKAGING_INSTALL_PREFIX or CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX
# are treated as one of relocation paths
#
# May be used to remove CPACK_PACKAGING_INSTALL_PREFIX and CPACK_RPM_<COMPONENT>_PACKAGE_PREFIX
# from relocatable RPM prefix paths.
#
# .. variable:: CPACK_RPM_ADDITIONAL_MAN_DIRS
#
# * Mandatory : NO
# * Default : -
#
# May be used to set additional man dirs that could potentially be compressed
# by brp-compress RPM macro. Variable content must be a list of regular
# expressions that point to directories containing man files or to man files
# directly. Note that in order to compress man pages a path must also be
# present in brp-compress RPM script and that brp-compress script must be
# added to RPM configuration by the operating system.
#
# Regular expressions that are added by default were taken from brp-compress
# RPM macro:
#
# - /usr/man/man.*
# - /usr/man/.*/man.*
# - /usr/info.*
# - /usr/share/man/man.*
# - /usr/share/man/.*/man.*
# - /usr/share/info.*
# - /usr/kerberos/man.*
# - /usr/X11R6/man/man.*
# - /usr/lib/perl5/man/man.*
# - /usr/share/doc/.*/man/man.*
# - /usr/lib/.*/man/man.*
#
# .. variable:: CPACK_RPM_DEFAULT_USER
# CPACK_RPM_<compName>_DEFAULT_USER
#
# default user ownership of RPM content
#
# * Mandatory : NO
# * Default : root
#
# Value should be user name and not UID.
# Note that <compName> must be in upper-case.
#
# .. variable:: CPACK_RPM_DEFAULT_GROUP
# CPACK_RPM_<compName>_DEFAULT_GROUP
#
# default group ownership of RPM content
#
# * Mandatory : NO
# * Default : root
#
# Value should be group name and not GID.
# Note that <compName> must be in upper-case.
#
# .. variable:: CPACK_RPM_DEFAULT_FILE_PERMISSIONS
# CPACK_RPM_<compName>_DEFAULT_FILE_PERMISSIONS
#
# default permissions used for packaged files
#
# * Mandatory : NO
# * Default : - (system default)
#
# Accepted values are lists with ``PERMISSIONS``. Valid permissions
# are:
#
# - OWNER_READ
# - OWNER_WRITE
# - OWNER_EXECUTE
# - GROUP_READ
# - GROUP_WRITE
# - GROUP_EXECUTE
# - WORLD_READ
# - WORLD_WRITE
# - WORLD_EXECUTE
#
# Note that <compName> must be in upper-case.
#
# .. variable:: CPACK_RPM_DEFAULT_DIR_PERMISSIONS
# CPACK_RPM_<compName>_DEFAULT_DIR_PERMISSIONS
#
# default permissions used for packaged directories
#
# * Mandatory : NO
# * Default : - (system default)
#
# Accepted values are lists with PERMISSIONS. Valid permissions
# are the same as for :variable:`CPACK_RPM_DEFAULT_FILE_PERMISSIONS`.
# Note that <compName> must be in upper-case.
#
# .. variable:: CPACK_RPM_INSTALL_WITH_EXEC
#
# force execute permissions on programs and shared libraries
#
# * Mandatory : NO
# * Default : - (system default)
#
# Force set owner, group and world execute permissions on programs and shared
# libraries. This can be used for creating valid rpm packages on systems such
# as Debian where shared libraries do not have execute permissions set.
#
# .. note::
#
# Programs and shared libraries without execute permissions are ignored during
# separation of debug symbols from the binary for debuginfo packages.
#
# Packaging of Symbolic Links
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^
#
# CPackRPM supports packaging of symbolic links::
#
# execute_process(COMMAND ${CMAKE_COMMAND}
# -E create_symlink <relative_path_location> <symlink_name>)
# install(FILES ${CMAKE_CURRENT_BINARY_DIR}/<symlink_name>
# DESTINATION <symlink_location> COMPONENT libraries)
#
# Symbolic links will be optimized (paths will be shortened if possible)
# before being added to the package or if multiple relocation paths are
# detected, a post install symlink relocation script will be generated.
#
# Symbolic links may point to locations that are not packaged by the same
# package (either a different component or even not packaged at all) but
# those locations will be treated as if they were a part of the package
# while determining if symlink should be either created or present in a
# post install script - depending on relocation paths.
#
# Symbolic links that point to locations outside packaging path produce a
# warning and are treated as non relocatable permanent symbolic links.
#
# Currently there are a few limitations though:
#
# * For component based packaging component interdependency is not checked
# when processing symbolic links. Symbolic links pointing to content of
# a different component are treated the same way as if pointing to location
# that will not be packaged.
#
# * Symbolic links pointing to a location through one or more intermediate
# symbolic links will not be handled differently - if the intermediate
# symbolic link(s) is also on a relocatable path, relocating it during
# package installation may cause initial symbolic link to point to an
# invalid location.
#
# Packaging of debug information
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
#
# Debuginfo packages contain debug symbols and sources for debugging packaged
# binaries.
#
# Debuginfo RPM packaging has it's own set of variables:
#
# .. variable:: CPACK_RPM_DEBUGINFO_PACKAGE
# CPACK_RPM_<component>_DEBUGINFO_PACKAGE
#
# Enable generation of debuginfo RPM package(s).
#
# * Mandatory : NO
# * Default : OFF
#
# .. note::
#
# Binaries must contain debug symbols before packaging so use either ``Debug``
# or ``RelWithDebInfo`` for :variable:`CMAKE_BUILD_TYPE` variable value.
#
# .. note::
#
# Packages generated from packages without binary files, with binary files but
# without execute permissions or without debug symbols will cause packaging
# termination.
#
# .. variable:: CPACK_BUILD_SOURCE_DIRS
#
# Provides locations of root directories of source files from which binaries
# were built.
#
# * Mandatory : YES if :variable:`CPACK_RPM_DEBUGINFO_PACKAGE` is set
# * Default : -
#
# .. note::
#
# For CMake project :variable:`CPACK_BUILD_SOURCE_DIRS` is set by default to
# point to :variable:`CMAKE_SOURCE_DIR` and :variable:`CMAKE_BINARY_DIR` paths.
#
# .. note::
#
# Sources with path prefixes that do not fall under any location provided with
# :variable:`CPACK_BUILD_SOURCE_DIRS` will not be present in debuginfo package.
#
# .. variable:: CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX
# CPACK_RPM_<component>_BUILD_SOURCE_DIRS_PREFIX
#
# Prefix of location where sources will be placed during package installation.
#
# * Mandatory : YES if :variable:`CPACK_RPM_DEBUGINFO_PACKAGE` is set
# * Default : "/usr/src/debug/<CPACK_PACKAGE_FILE_NAME>" and
# for component packaging "/usr/src/debug/<CPACK_PACKAGE_FILE_NAME>-<component>"
#
# .. note::
#
# Each source path prefix is additionally suffixed by ``src_<index>`` where
# index is index of the path used from :variable:`CPACK_BUILD_SOURCE_DIRS`
# variable. This produces ``<CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX>/src_<index>``
# replacement path.
# Limitation is that replaced path part must be shorter or of equal
# length than the length of its replacement. If that is not the case either
# :variable:`CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX` variable has to be set to
# a shorter path or source directories must be placed on a longer path.
#
# .. variable:: CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS
#
# Directories containing sources that should be excluded from debuginfo packages.
#
# * Mandatory : NO
# * Default : "/usr /usr/src /usr/src/debug"
#
# Listed paths are owned by other RPM packages and should therefore not be
# deleted on debuginfo package uninstallation.
#
# .. variable:: CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS_ADDITION
#
# Paths that should be appended to :variable:`CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS`
# for exclusion.
#
# * Mandatory : NO
# * Default : -
#
# .. variable:: CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE
#
# Create a single debuginfo package even if components packaging is set.
#
# * Mandatory : NO
# * Default : OFF
#
# When this variable is enabled it produces a single debuginfo package even if
# component packaging is enabled.
#
# When using this feature in combination with components packaging and there is
# more than one component this variable requires :variable:`CPACK_RPM_MAIN_COMPONENT`
# to be set.
#
# .. note::
#
# If none of the :variable:`CPACK_RPM_<component>_DEBUGINFO_PACKAGE` variables
# is set then :variable:`CPACK_RPM_DEBUGINFO_PACKAGE` is automatically set to
# ``ON`` when :variable:`CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE` is set.
#
# .. variable:: CPACK_RPM_DEBUGINFO_FILE_NAME
# CPACK_RPM_<component>_DEBUGINFO_FILE_NAME
#
# Debuginfo package file name.
#
# * Mandatory : NO
# * Default : rpmbuild tool generated package file name
#
# Alternatively provided debuginfo package file name must end with ``.rpm``
# suffix and should differ from file names of other generated packages.
#
# Variable may contain ``@cpack_component@`` placeholder which will be
# replaced by component name if component packaging is enabled otherwise it
# deletes the placeholder.
#
# Setting the variable to ``RPM-DEFAULT`` may be used to explicitly set
# filename generation to default.
#
# .. note::
#
# :variable:`CPACK_RPM_FILE_NAME` also supports rpmbuild tool generated package
# file name - disabled by default but can be enabled by setting the variable to
# ``RPM-DEFAULT``.
#
# Packaging of sources (SRPM)
# ^^^^^^^^^^^^^^^^^^^^^^^^^^^
#
# SRPM packaging is enabled by setting :variable:`CPACK_RPM_PACKAGE_SOURCES`
# variable while usually using :variable:`CPACK_INSTALLED_DIRECTORIES` variable
# to provide directory containing CMakeLists.txt and source files.
#
# For CMake projects SRPM package would be product by executing:
#
# ``cpack -G RPM --config ./CPackSourceConfig.cmake``
#
# .. note::
#
# Produced SRPM package is expected to be built with :manual:`cmake(1)` executable
# and packaged with :manual:`cpack(1)` executable so CMakeLists.txt has to be
# located in root source directory and must be able to generate binary rpm
# packages by executing ``cpack -G`` command. The two executables as well as
# rpmbuild must also be present when generating binary rpm packages from the
# produced SRPM package.
#
# Once the SRPM package is generated it can be used to generate binary packages
# by creating a directory structure for rpm generation and executing rpmbuild
# tool:
#
# ``mkdir -p build_dir/{BUILD,BUILDROOT,RPMS,SOURCES,SPECS,SRPMS}``
# ``rpmbuild --define "_topdir <path_to_build_dir>" --rebuild <SRPM_file_name>``
#
# Generated packages will be located in build_dir/RPMS directory or its sub
# directories.
#
# .. note::
#
# SRPM package internally uses CPack/RPM generator to generate binary packages
# so CMakeScripts.txt can decide during the SRPM to binary rpm generation step
# what content the package(s) should have as well as how they should be packaged
# (monolithic or components). CMake can decide this for e.g. by reading environment
# variables set by the package manager before starting the process of generating
# binary rpm packages. This way a single SRPM package can be used to produce
# different binary rpm packages on different platforms depending on the platform's
# packaging rules.
#
# Source RPM packaging has it's own set of variables:
#
# .. variable:: CPACK_RPM_PACKAGE_SOURCES
#
# Should the content be packaged as a source rpm (default is binary rpm).
#
# * Mandatory : NO
# * Default : OFF
#
# .. note::
#
# For cmake projects :variable:`CPACK_RPM_PACKAGE_SOURCES` variable is set
# to ``OFF`` in CPackConfig.cmake and ``ON`` in CPackSourceConfig.cmake
# generated files.
#
# .. variable:: CPACK_RPM_SOURCE_PKG_BUILD_PARAMS
#
# Additional command-line parameters provided to :manual:`cmake(1)` executable.
#
# * Mandatory : NO
# * Default : -
#
# .. variable:: CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX
#
# Packaging install prefix that would be provided in :variable:`CPACK_PACKAGING_INSTALL_PREFIX`
# variable for producing binary RPM packages.
#
# * Mandatory : YES
# * Default : "/"
#
# .. VARIABLE:: CPACK_RPM_BUILDREQUIRES
#
# List of source rpm build dependencies.
#
# * Mandatory : NO
# * Default : -
#
# May be used to set source RPM build dependencies (BuildRequires). Note that
# you must enclose the complete build requirements string between quotes, for
# example::
#
# set(CPACK_RPM_BUILDREQUIRES "python >= 2.5.0, cmake >= 2.8")
# Author: Eric Noulard with the help of Alexander Neundorf.
function(get_file_permissions FILE RETURN_VAR)
execute_process(COMMAND ls -l ${FILE}
OUTPUT_VARIABLE permissions_
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
string(REPLACE " " ";" permissions_ "${permissions_}")
list(GET permissions_ 0 permissions_)
unset(text_notation_)
set(any_chars_ ".")
foreach(PERMISSION_TYPE "OWNER" "GROUP" "WORLD")
if(permissions_ MATCHES "${any_chars_}r.*")
list(APPEND text_notation_ "${PERMISSION_TYPE}_READ")
endif()
string(APPEND any_chars_ ".")
if(permissions_ MATCHES "${any_chars_}w.*")
list(APPEND text_notation_ "${PERMISSION_TYPE}_WRITE")
endif()
string(APPEND any_chars_ ".")
if(permissions_ MATCHES "${any_chars_}x.*")
list(APPEND text_notation_ "${PERMISSION_TYPE}_EXECUTE")
endif()
endforeach()
set(${RETURN_VAR} "${text_notation_}" PARENT_SCOPE)
endfunction()
function(get_unix_permissions_octal_notation PERMISSIONS_VAR RETURN_VAR)
set(PERMISSIONS ${${PERMISSIONS_VAR}})
list(LENGTH PERMISSIONS PERM_LEN_PRE)
list(REMOVE_DUPLICATES PERMISSIONS)
list(LENGTH PERMISSIONS PERM_LEN_POST)
if(NOT ${PERM_LEN_PRE} EQUAL ${PERM_LEN_POST})
message(FATAL_ERROR "${PERMISSIONS_VAR} contains duplicate values.")
endif()
foreach(PERMISSION_TYPE "OWNER" "GROUP" "WORLD")
set(${PERMISSION_TYPE}_PERMISSIONS 0)
foreach(PERMISSION ${PERMISSIONS})
if("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_READ")
math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 4")
elseif("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_WRITE")
math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 2")
elseif("${PERMISSION}" STREQUAL "${PERMISSION_TYPE}_EXECUTE")
math(EXPR ${PERMISSION_TYPE}_PERMISSIONS "${${PERMISSION_TYPE}_PERMISSIONS} + 1")
elseif(PERMISSION MATCHES "${PERMISSION_TYPE}.*")
message(FATAL_ERROR "${PERMISSIONS_VAR} contains invalid values.")
endif()
endforeach()
endforeach()
set(${RETURN_VAR} "${OWNER_PERMISSIONS}${GROUP_PERMISSIONS}${WORLD_PERMISSIONS}" PARENT_SCOPE)
endfunction()
function(cpack_rpm_prepare_relocation_paths)
# set appropriate prefix, remove possible trailing slash and convert backslashes to slashes
if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX)
file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_PREFIX}" PATH_PREFIX)
elseif(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_PREFIX)
file(TO_CMAKE_PATH "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_PREFIX}" PATH_PREFIX)
else()
file(TO_CMAKE_PATH "${CPACK_PACKAGING_INSTALL_PREFIX}" PATH_PREFIX)
endif()
set(RPM_RELOCATION_PATHS "${CPACK_RPM_RELOCATION_PATHS}")
list(REMOVE_DUPLICATES RPM_RELOCATION_PATHS)
# set base path prefix
if(EXISTS "${WDIR}/${PATH_PREFIX}")
if(NOT CPACK_RPM_NO_INSTALL_PREFIX_RELOCATION AND
NOT CPACK_RPM_NO_${CPACK_RPM_PACKAGE_COMPONENT}_INSTALL_PREFIX_RELOCATION AND
NOT CPACK_RPM_NO_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_INSTALL_PREFIX_RELOCATION)
string(APPEND TMP_RPM_PREFIXES "Prefix: ${PATH_PREFIX}\n")
list(APPEND RPM_USED_PACKAGE_PREFIXES "${PATH_PREFIX}")
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: removing '${PATH_PREFIX}' from relocation paths")
endif()
endif()
endif()
# set other path prefixes
foreach(RELOCATION_PATH ${RPM_RELOCATION_PATHS})
if(IS_ABSOLUTE "${RELOCATION_PATH}")
set(PREPARED_RELOCATION_PATH "${RELOCATION_PATH}")
elseif(PATH_PREFIX STREQUAL "/")
# don't prefix path with a second slash as "//" is treated as network path
# by get_filename_component() so it remains in path even inside rpm
# package where it may cause problems with relocation
set(PREPARED_RELOCATION_PATH "/${RELOCATION_PATH}")
else()
set(PREPARED_RELOCATION_PATH "${PATH_PREFIX}/${RELOCATION_PATH}")
endif()
# handle cases where path contains extra slashes (e.g. /a//b/ instead of
# /a/b)
get_filename_component(PREPARED_RELOCATION_PATH
"${PREPARED_RELOCATION_PATH}" ABSOLUTE)
if(EXISTS "${WDIR}/${PREPARED_RELOCATION_PATH}")
string(APPEND TMP_RPM_PREFIXES "Prefix: ${PREPARED_RELOCATION_PATH}\n")
list(APPEND RPM_USED_PACKAGE_PREFIXES "${PREPARED_RELOCATION_PATH}")
endif()
endforeach()
# warn about all the paths that are not relocatable
file(GLOB_RECURSE FILE_PATHS_ "${WDIR}/*")
foreach(TMP_PATH ${FILE_PATHS_})
string(LENGTH "${WDIR}" WDIR_LEN)
string(SUBSTRING "${TMP_PATH}" ${WDIR_LEN} -1 TMP_PATH)
unset(TMP_PATH_FOUND_)
foreach(RELOCATION_PATH ${RPM_USED_PACKAGE_PREFIXES})
file(RELATIVE_PATH REL_PATH_ "${RELOCATION_PATH}" "${TMP_PATH}")
string(SUBSTRING "${REL_PATH_}" 0 2 PREFIX_)
if(NOT "${PREFIX_}" STREQUAL "..")
set(TPM_PATH_FOUND_ TRUE)
break()
endif()
endforeach()
if(NOT TPM_PATH_FOUND_)
message(AUTHOR_WARNING "CPackRPM:Warning: Path ${TMP_PATH} is not on one of the relocatable paths! Package will be partially relocatable.")
endif()
endforeach()
set(RPM_USED_PACKAGE_PREFIXES "${RPM_USED_PACKAGE_PREFIXES}" PARENT_SCOPE)
set(TMP_RPM_PREFIXES "${TMP_RPM_PREFIXES}" PARENT_SCOPE)
endfunction()
function(cpack_rpm_prepare_content_list)
# get files list
file(GLOB_RECURSE CPACK_RPM_INSTALL_FILES LIST_DIRECTORIES true RELATIVE "${WDIR}" "${WDIR}/*")
set(CPACK_RPM_INSTALL_FILES "/${CPACK_RPM_INSTALL_FILES}")
string(REPLACE ";" ";/" CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}")
# if we are creating a relocatable package, omit parent directories of
# CPACK_RPM_PACKAGE_PREFIX. This is achieved by building a "filter list"
# which is passed to the find command that generates the content-list
if(CPACK_RPM_PACKAGE_RELOCATABLE)
# get a list of the elements in CPACK_RPM_PACKAGE_PREFIXES that are
# destinct parent paths of other relocation paths and remove the
# final element (so the install-prefix dir itself is not omitted
# from the RPM's content-list)
list(SORT RPM_USED_PACKAGE_PREFIXES)
set(_DISTINCT_PATH "NOT_SET")
foreach(_RPM_RELOCATION_PREFIX ${RPM_USED_PACKAGE_PREFIXES})
if(NOT "${_RPM_RELOCATION_PREFIX}" MATCHES "${_DISTINCT_PATH}/.*")
set(_DISTINCT_PATH "${_RPM_RELOCATION_PREFIX}")
string(REPLACE "/" ";" _CPACK_RPM_PACKAGE_PREFIX_ELEMS " ${_RPM_RELOCATION_PREFIX}")
list(REMOVE_AT _CPACK_RPM_PACKAGE_PREFIX_ELEMS -1)
unset(_TMP_LIST)
# Now generate all of the parent dirs of the relocation path
foreach(_PREFIX_PATH_ELEM ${_CPACK_RPM_PACKAGE_PREFIX_ELEMS})
list(APPEND _TMP_LIST "${_PREFIX_PATH_ELEM}")
string(REPLACE ";" "/" _OMIT_DIR "${_TMP_LIST}")
separate_arguments(_OMIT_DIR)
list(APPEND _RPM_DIRS_TO_OMIT ${_OMIT_DIR})
endforeach()
endif()
endforeach()
endif()
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Initial list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}")
endif()
if(NOT DEFINED CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST)
set(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST /etc /etc/init.d /usr /usr/bin
/usr/include /usr/lib /usr/libx32 /usr/lib64
/usr/share /usr/share/aclocal /usr/share/doc )
if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Adding ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION} to builtin omit list.")
endif()
list(APPEND CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST "${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST_ADDITION}")
endif()
endif()
if(CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST= ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST}")
endif()
list(APPEND _RPM_DIRS_TO_OMIT ${CPACK_RPM_EXCLUDE_FROM_AUTO_FILELIST})
endif()
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Final list of path to OMIT in RPM: ${_RPM_DIRS_TO_OMIT}")
endif()
list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES ${_RPM_DIRS_TO_OMIT})
# add man paths that will be compressed
# (copied from /usr/lib/rpm/brp-compress - script that does the actual
# compressing)
list(APPEND MAN_LOCATIONS "/usr/man/man.*" "/usr/man/.*/man.*" "/usr/info.*"
"/usr/share/man/man.*" "/usr/share/man/.*/man.*" "/usr/share/info.*"
"/usr/kerberos/man.*" "/usr/X11R6/man/man.*" "/usr/lib/perl5/man/man.*"
"/usr/share/doc/.*/man/man.*" "/usr/lib/.*/man/man.*")
if(CPACK_RPM_ADDITIONAL_MAN_DIRS)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: CPACK_RPM_ADDITIONAL_MAN_DIRS= ${CPACK_RPM_ADDITIONAL_MAN_DIRS}")
endif()
list(APPEND MAN_LOCATIONS ${CPACK_RPM_ADDITIONAL_MAN_DIRS})
endif()
foreach(PACK_LOCATION IN LISTS CPACK_RPM_INSTALL_FILES)
foreach(MAN_LOCATION IN LISTS MAN_LOCATIONS)
# man pages are files inside a certain location
if(PACK_LOCATION MATCHES "${MAN_LOCATION}/"
AND NOT IS_DIRECTORY "${WDIR}${PACK_LOCATION}"
AND NOT IS_SYMLINK "${WDIR}${PACK_LOCATION}")
list(FIND CPACK_RPM_INSTALL_FILES "${PACK_LOCATION}" INDEX)
# insert file location that covers compressed man pages
# even if using a wildcard causes duplicates as those are
# handled by RPM and we still keep the same file list
# in spec file - wildcard only represents file type (e.g. .gz)
list(INSERT CPACK_RPM_INSTALL_FILES ${INDEX} "${PACK_LOCATION}*")
# remove file location that doesn't cover compressed man pages
math(EXPR INDEX ${INDEX}+1)
list(REMOVE_AT CPACK_RPM_INSTALL_FILES ${INDEX})
break()
endif()
endforeach()
endforeach()
set(CPACK_RPM_INSTALL_FILES "${CPACK_RPM_INSTALL_FILES}" PARENT_SCOPE)
endfunction()
function(cpack_rpm_symlink_get_relocation_prefixes LOCATION PACKAGE_PREFIXES RETURN_VARIABLE)
foreach(PKG_PREFIX IN LISTS PACKAGE_PREFIXES)
string(REGEX MATCH "^${PKG_PREFIX}/.*" FOUND_ "${LOCATION}")
if(FOUND_)
list(APPEND TMP_PREFIXES "${PKG_PREFIX}")
endif()
endforeach()
set(${RETURN_VARIABLE} "${TMP_PREFIXES}" PARENT_SCOPE)
endfunction()
function(cpack_rpm_symlink_create_relocation_script PACKAGE_PREFIXES)
list(LENGTH PACKAGE_PREFIXES LAST_INDEX)
set(SORTED_PACKAGE_PREFIXES "${PACKAGE_PREFIXES}")
list(SORT SORTED_PACKAGE_PREFIXES)
list(REVERSE SORTED_PACKAGE_PREFIXES)
math(EXPR LAST_INDEX ${LAST_INDEX}-1)
foreach(SYMLINK_INDEX RANGE ${LAST_INDEX})
list(GET SORTED_PACKAGE_PREFIXES ${SYMLINK_INDEX} SRC_PATH)
list(FIND PACKAGE_PREFIXES "${SRC_PATH}" SYMLINK_INDEX) # reverse magic
string(LENGTH "${SRC_PATH}" SRC_PATH_LEN)
set(PARTS_CNT 0)
set(SCRIPT_PART "if [ \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}\" != \"${SRC_PATH}\" ]; then\n")
# both paths relocated
foreach(POINT_INDEX RANGE ${LAST_INDEX})
list(GET SORTED_PACKAGE_PREFIXES ${POINT_INDEX} POINT_PATH)
list(FIND PACKAGE_PREFIXES "${POINT_PATH}" POINT_INDEX) # reverse magic
string(LENGTH "${POINT_PATH}" POINT_PATH_LEN)
if(_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX})
if("${SYMLINK_INDEX}" EQUAL "${POINT_INDEX}")
set(INDENT "")
else()
string(APPEND SCRIPT_PART " if [ \"$RPM_INSTALL_PREFIX${POINT_INDEX}\" != \"${POINT_PATH}\" ]; then\n")
set(INDENT " ")
endif()
foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX})
math(EXPR PARTS_CNT ${PARTS_CNT}+1)
math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
math(EXPR SRC_PATH_END ${SPLIT_INDEX}-${SRC_PATH_LEN})
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${SRC_PATH_LEN} ${SRC_PATH_END} SYMLINK_)
math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1+${POINT_PATH_LEN})
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
string(APPEND SCRIPT_PART " ${INDENT}if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
string(APPEND SCRIPT_PART " ${INDENT}ln -s \"$RPM_INSTALL_PREFIX${POINT_INDEX}${POINT_}\" \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}${SYMLINK_}\"\n")
string(APPEND SCRIPT_PART " ${INDENT}CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n")
string(APPEND SCRIPT_PART " ${INDENT}fi\n")
endforeach()
if(NOT "${SYMLINK_INDEX}" EQUAL "${POINT_INDEX}")
string(APPEND SCRIPT_PART " fi\n")
endif()
endif()
endforeach()
# source path relocated
if(_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X)
foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X)
math(EXPR PARTS_CNT ${PARTS_CNT}+1)
math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
math(EXPR SRC_PATH_END ${SPLIT_INDEX}-${SRC_PATH_LEN})
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${SRC_PATH_LEN} ${SRC_PATH_END} SYMLINK_)
math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1)
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
string(APPEND SCRIPT_PART " if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
string(APPEND SCRIPT_PART " ln -s \"${POINT_}\" \"$RPM_INSTALL_PREFIX${SYMLINK_INDEX}${SYMLINK_}\"\n")
string(APPEND SCRIPT_PART " CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n")
string(APPEND SCRIPT_PART " fi\n")
endforeach()
endif()
if(PARTS_CNT)
set(SCRIPT "${SCRIPT_PART}")
string(APPEND SCRIPT "fi\n")
endif()
endforeach()
# point path relocated
foreach(POINT_INDEX RANGE ${LAST_INDEX})
list(GET SORTED_PACKAGE_PREFIXES ${POINT_INDEX} POINT_PATH)
list(FIND PACKAGE_PREFIXES "${POINT_PATH}" POINT_INDEX) # reverse magic
string(LENGTH "${POINT_PATH}" POINT_PATH_LEN)
if(_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX})
string(APPEND SCRIPT "if [ \"$RPM_INSTALL_PREFIX${POINT_INDEX}\" != \"${POINT_PATH}\" ]; then\n")
foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX})
math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} 0 ${SPLIT_INDEX} SYMLINK_)
math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1+${POINT_PATH_LEN})
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
string(APPEND SCRIPT " if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
string(APPEND SCRIPT " ln -s \"$RPM_INSTALL_PREFIX${POINT_INDEX}${POINT_}\" \"${SYMLINK_}\"\n")
string(APPEND SCRIPT " CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}=true\n")
string(APPEND SCRIPT " fi\n")
endforeach()
string(APPEND SCRIPT "fi\n")
endif()
endforeach()
# no path relocated
if(_RPM_RELOCATION_SCRIPT_X_X)
foreach(RELOCATION_NO IN LISTS _RPM_RELOCATION_SCRIPT_X_X)
math(EXPR RELOCATION_INDEX ${RELOCATION_NO}-1)
list(GET _RPM_RELOCATION_SCRIPT_PAIRS ${RELOCATION_INDEX} RELOCATION_SCRIPT_PAIR)
string(FIND "${RELOCATION_SCRIPT_PAIR}" ":" SPLIT_INDEX)
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} 0 ${SPLIT_INDEX} SYMLINK_)
math(EXPR POINT_PATH_START ${SPLIT_INDEX}+1)
string(SUBSTRING ${RELOCATION_SCRIPT_PAIR} ${POINT_PATH_START} -1 POINT_)
string(APPEND SCRIPT "if [ -z \"$CPACK_RPM_RELOCATED_SYMLINK_${RELOCATION_INDEX}\" ]; then\n")
string(APPEND SCRIPT " ln -s \"${POINT_}\" \"${SYMLINK_}\"\n")
string(APPEND SCRIPT "fi\n")
endforeach()
endif()
set(RPM_SYMLINK_POSTINSTALL "${SCRIPT}" PARENT_SCOPE)
endfunction()
function(cpack_rpm_symlink_add_for_relocation_script PACKAGE_PREFIXES SYMLINK SYMLINK_RELOCATION_PATHS POINT POINT_RELOCATION_PATHS)
list(LENGTH SYMLINK_RELOCATION_PATHS SYMLINK_PATHS_COUTN)
list(LENGTH POINT_RELOCATION_PATHS POINT_PATHS_COUNT)
list(APPEND _RPM_RELOCATION_SCRIPT_PAIRS "${SYMLINK}:${POINT}")
list(LENGTH _RPM_RELOCATION_SCRIPT_PAIRS PAIR_NO)
if(SYMLINK_PATHS_COUTN)
foreach(SYMLINK_RELOC_PATH IN LISTS SYMLINK_RELOCATION_PATHS)
list(FIND PACKAGE_PREFIXES "${SYMLINK_RELOC_PATH}" SYMLINK_INDEX)
# source path relocated
list(APPEND _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X "${PAIR_NO}")
list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_X")
foreach(POINT_RELOC_PATH IN LISTS POINT_RELOCATION_PATHS)
list(FIND PACKAGE_PREFIXES "${POINT_RELOC_PATH}" POINT_INDEX)
# both paths relocated
list(APPEND _RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX} "${PAIR_NO}")
list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_${SYMLINK_INDEX}_${POINT_INDEX}")
# point path relocated
list(APPEND _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX} "${PAIR_NO}")
list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}")
endforeach()
endforeach()
elseif(POINT_PATHS_COUNT)
foreach(POINT_RELOC_PATH IN LISTS POINT_RELOCATION_PATHS)
list(FIND PACKAGE_PREFIXES "${POINT_RELOC_PATH}" POINT_INDEX)
# point path relocated
list(APPEND _RPM_RELOCATION_SCRIPT_X_${POINT_INDEX} "${PAIR_NO}")
list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_${POINT_INDEX}")
endforeach()
endif()
# no path relocated
list(APPEND _RPM_RELOCATION_SCRIPT_X_X "${PAIR_NO}")
list(APPEND RELOCATION_VARS "_RPM_RELOCATION_SCRIPT_X_X")
# place variables into parent scope
foreach(VAR IN LISTS RELOCATION_VARS)
set(${VAR} "${${VAR}}" PARENT_SCOPE)
endforeach()
set(_RPM_RELOCATION_SCRIPT_PAIRS "${_RPM_RELOCATION_SCRIPT_PAIRS}" PARENT_SCOPE)
set(REQUIRES_SYMLINK_RELOCATION_SCRIPT "true" PARENT_SCOPE)
set(DIRECTIVE "%ghost " PARENT_SCOPE)
endfunction()
function(cpack_rpm_prepare_install_files INSTALL_FILES_LIST WDIR PACKAGE_PREFIXES IS_RELOCATABLE)
# Prepend directories in ${CPACK_RPM_INSTALL_FILES} with %dir
# This is necessary to avoid duplicate files since rpmbuild does
# recursion on its own when encountering a pathname which is a directory
# which is not flagged as %dir
string(STRIP "${INSTALL_FILES_LIST}" INSTALL_FILES_LIST)
string(REPLACE "\n" ";" INSTALL_FILES_LIST
"${INSTALL_FILES_LIST}")
string(REPLACE "\"" "" INSTALL_FILES_LIST
"${INSTALL_FILES_LIST}")
string(LENGTH "${WDIR}" WDR_LEN_)
list(SORT INSTALL_FILES_LIST) # make file order consistent on all platforms
foreach(F IN LISTS INSTALL_FILES_LIST)
unset(DIRECTIVE)
if(IS_SYMLINK "${WDIR}/${F}")
if(IS_RELOCATABLE)
# check that symlink has relocatable format
get_filename_component(SYMLINK_LOCATION_ "${WDIR}/${F}" DIRECTORY)
execute_process(COMMAND ls -la "${WDIR}/${F}"
WORKING_DIRECTORY "${WDIR}"
OUTPUT_VARIABLE SYMLINK_POINT_
OUTPUT_STRIP_TRAILING_WHITESPACE)
string(FIND "${SYMLINK_POINT_}" "->" SYMLINK_POINT_INDEX_ REVERSE)
math(EXPR SYMLINK_POINT_INDEX_ ${SYMLINK_POINT_INDEX_}+3)
string(LENGTH "${SYMLINK_POINT_}" SYMLINK_POINT_LENGTH_)
# get destination path
string(SUBSTRING "${SYMLINK_POINT_}" ${SYMLINK_POINT_INDEX_} ${SYMLINK_POINT_LENGTH_} SYMLINK_POINT_)
# check if path is relative or absolute
string(SUBSTRING "${SYMLINK_POINT_}" 0 1 SYMLINK_IS_ABSOLUTE_)
if(${SYMLINK_IS_ABSOLUTE_} STREQUAL "/")
# prevent absolute paths from having /../ or /./ section inside of them
get_filename_component(SYMLINK_POINT_ "${SYMLINK_POINT_}" ABSOLUTE)
else()
# handle relative path
get_filename_component(SYMLINK_POINT_ "${SYMLINK_LOCATION_}/${SYMLINK_POINT_}" ABSOLUTE)
endif()
# recalculate path length after conversion to canonical form
string(LENGTH "${SYMLINK_POINT_}" SYMLINK_POINT_LENGTH_)
if(SYMLINK_POINT_ MATCHES "${WDIR}/.*")
# only symlinks that are pointing inside the packaging structure should be checked for relocation
string(SUBSTRING "${SYMLINK_POINT_}" ${WDR_LEN_} -1 SYMLINK_POINT_WD_)
cpack_rpm_symlink_get_relocation_prefixes("${F}" "${PACKAGE_PREFIXES}" "SYMLINK_RELOCATIONS")
cpack_rpm_symlink_get_relocation_prefixes("${SYMLINK_POINT_WD_}" "${PACKAGE_PREFIXES}" "POINT_RELOCATIONS")
list(LENGTH SYMLINK_RELOCATIONS SYMLINK_RELOCATIONS_COUNT)
list(LENGTH POINT_RELOCATIONS POINT_RELOCATIONS_COUNT)
else()
# location pointed to is ouside WDR so it should be treated as a permanent symlink
set(SYMLINK_POINT_WD_ "${SYMLINK_POINT_}")
unset(SYMLINK_RELOCATIONS)
unset(POINT_RELOCATIONS)
unset(SYMLINK_RELOCATIONS_COUNT)
unset(POINT_RELOCATIONS_COUNT)
message(AUTHOR_WARNING "CPackRPM:Warning: Symbolic link '${F}' points to location that is outside packaging path! Link will possibly not be relocatable.")
endif()
if(SYMLINK_RELOCATIONS_COUNT AND POINT_RELOCATIONS_COUNT)
# find matching
foreach(SYMLINK_RELOCATION_PREFIX IN LISTS SYMLINK_RELOCATIONS)
list(FIND POINT_RELOCATIONS "${SYMLINK_RELOCATION_PREFIX}" FOUND_INDEX)
if(NOT ${FOUND_INDEX} EQUAL -1)
break()
endif()
endforeach()
if(NOT ${FOUND_INDEX} EQUAL -1)
# symlinks have the same subpath
if(${SYMLINK_RELOCATIONS_COUNT} EQUAL 1 AND ${POINT_RELOCATIONS_COUNT} EQUAL 1)
# permanent symlink
get_filename_component(SYMLINK_LOCATION_ "${F}" DIRECTORY)
file(RELATIVE_PATH FINAL_PATH_ ${SYMLINK_LOCATION_} ${SYMLINK_POINT_WD_})
execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${FINAL_PATH_}" "${WDIR}/${F}")
else()
# relocation subpaths
cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}"
"${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}")
endif()
else()
# not on the same relocation path
cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}"
"${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}")
endif()
elseif(POINT_RELOCATIONS_COUNT)
# point is relocatable
cpack_rpm_symlink_add_for_relocation_script("${PACKAGE_PREFIXES}" "${F}" "${SYMLINK_RELOCATIONS}"
"${SYMLINK_POINT_WD_}" "${POINT_RELOCATIONS}")
else()
# is not relocatable or points to non relocatable path - permanent symlink
execute_process(COMMAND "${CMAKE_COMMAND}" -E create_symlink "${SYMLINK_POINT_WD_}" "${WDIR}/${F}")
endif()
endif()
elseif(IS_DIRECTORY "${WDIR}/${F}")
set(DIRECTIVE "%dir ")
endif()
string(APPEND INSTALL_FILES "${DIRECTIVE}\"${F}\"\n")
endforeach()
if(REQUIRES_SYMLINK_RELOCATION_SCRIPT)
cpack_rpm_symlink_create_relocation_script("${PACKAGE_PREFIXES}")
endif()
set(RPM_SYMLINK_POSTINSTALL "${RPM_SYMLINK_POSTINSTALL}" PARENT_SCOPE)
set(CPACK_RPM_INSTALL_FILES "${INSTALL_FILES}" PARENT_SCOPE)
endfunction()
if(CMAKE_BINARY_DIR)
message(FATAL_ERROR "CPackRPM.cmake may only be used by CPack internally.")
endif()
if(NOT UNIX)
message(FATAL_ERROR "CPackRPM.cmake may only be used under UNIX.")
endif()
# We need to check if the binaries were compiled with debug symbols
# because without them the package will be useless
function(cpack_rpm_debugsymbol_check INSTALL_FILES WORKING_DIR)
if(NOT CPACK_BUILD_SOURCE_DIRS)
message(FATAL_ERROR "CPackRPM: CPACK_BUILD_SOURCE_DIRS variable is not set!"
" Required for debuginfo packaging. See documentation of"
" CPACK_RPM_DEBUGINFO_PACKAGE variable for details.")
endif()
# With objdump we should check the debug symbols
find_program(OBJDUMP_EXECUTABLE objdump)
if(NOT OBJDUMP_EXECUTABLE)
message(FATAL_ERROR "CPackRPM: objdump binary could not be found!"
" Required for debuginfo packaging. See documentation of"
" CPACK_RPM_DEBUGINFO_PACKAGE variable for details.")
endif()
# With debugedit we prepare source files list
find_program(DEBUGEDIT_EXECUTABLE debugedit "/usr/lib/rpm/")
if(NOT DEBUGEDIT_EXECUTABLE)
message(FATAL_ERROR "CPackRPM: debugedit binary could not be found!"
" Required for debuginfo packaging. See documentation of"
" CPACK_RPM_DEBUGINFO_PACKAGE variable for details.")
endif()
unset(mkdir_list_)
unset(cp_list_)
unset(additional_sources_)
foreach(F IN LISTS INSTALL_FILES)
if(IS_DIRECTORY "${WORKING_DIR}/${F}" OR IS_SYMLINK "${WORKING_DIR}/${F}")
continue()
endif()
execute_process(COMMAND "${OBJDUMP_EXECUTABLE}" -h ${WORKING_DIR}/${F}
WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}"
RESULT_VARIABLE OBJDUMP_EXEC_RESULT
OUTPUT_VARIABLE OBJDUMP_OUT
ERROR_QUIET)
# Check if the given file is an executable or not
if(NOT OBJDUMP_EXEC_RESULT)
string(FIND "${OBJDUMP_OUT}" "debug" FIND_RESULT)
if(FIND_RESULT GREATER -1)
set(index_ 0)
foreach(source_dir_ IN LISTS CPACK_BUILD_SOURCE_DIRS)
string(LENGTH "${source_dir_}" source_dir_len_)
string(LENGTH "${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}" debuginfo_dir_len)
if(source_dir_len_ LESS debuginfo_dir_len)
message(FATAL_ERROR "CPackRPM: source dir path '${source_dir_}' is"
" shorter than debuginfo sources dir path '${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}'!"
" Source dir path must be longer than debuginfo sources dir path."
" Set CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX variable to a shorter value"
" or make source dir path longer."
" Required for debuginfo packaging. See documentation of"
" CPACK_RPM_DEBUGINFO_PACKAGE variable for details.")
endif()
file(REMOVE "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}/debugsources_add.list")
execute_process(COMMAND "${DEBUGEDIT_EXECUTABLE}" -b "${source_dir_}" -d "${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}" -i -l "${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}/debugsources_add.list" "${WORKING_DIR}/${F}"
RESULT_VARIABLE res_
OUTPUT_VARIABLE opt_
ERROR_VARIABLE err_
)
file(STRINGS
"${CPACK_RPM_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}/debugsources_add.list"
sources_)
list(REMOVE_DUPLICATES sources_)
foreach(source_ IN LISTS sources_)
if(EXISTS "${source_dir_}/${source_}" AND NOT IS_DIRECTORY "${source_dir_}/${source_}")
get_filename_component(path_part_ "${source_}" DIRECTORY)
list(APPEND mkdir_list_ "%{buildroot}${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}/${path_part_}")
list(APPEND cp_list_ "cp \"${source_dir_}/${source_}\" \"%{buildroot}${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}/${path_part_}\"")
list(APPEND additional_sources_ "${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}/src_${index_}/${source_}")
endif()
endforeach()
math(EXPR index_ "${index_} + 1")
endforeach()
else()
message(WARNING "CPackRPM: File: ${F} does not contain debug symbols. They will possibly be missing from debuginfo package!")
endif()
get_file_permissions("${WORKING_DIR}/${F}" permissions_)
if(NOT "USER_EXECUTE" IN_LIST permissions_ AND
NOT "GROUP_EXECUTE" IN_LIST permissions_ AND
NOT "WORLD_EXECUTE" IN_LIST permissions_)
if(CPACK_RPM_INSTALL_WITH_EXEC)
execute_process(COMMAND chmod a+x ${WORKING_DIR}/${F}
RESULT_VARIABLE res_
ERROR_VARIABLE err_
OUTPUT_QUIET)
if(res_)
message(FATAL_ERROR "CPackRPM: could not apply execute permissions "
"requested by CPACK_RPM_INSTALL_WITH_EXEC variable on "
"'${WORKING_DIR}/${F}'! Reason: '${err_}'")
endif()
else()
message(AUTHOR_WARNING "CPackRPM: File: ${WORKING_DIR}/${F} does not "
"have execute permissions. Debuginfo symbols will not be extracted"
"! Missing debuginfo may cause packaging failure. Consider setting "
"execute permissions or setting 'CPACK_RPM_INSTALL_WITH_EXEC' "
"variable.")
endif()
endif()
endif()
endforeach()
list(LENGTH mkdir_list_ len_)
if(len_)
list(REMOVE_DUPLICATES mkdir_list_)
unset(TMP_RPM_DEBUGINFO_INSTALL)
foreach(part_ IN LISTS mkdir_list_)
string(APPEND TMP_RPM_DEBUGINFO_INSTALL "mkdir -p \"${part_}\"\n")
endforeach()
endif()
list(LENGTH cp_list_ len_)
if(len_)
list(REMOVE_DUPLICATES cp_list_)
foreach(part_ IN LISTS cp_list_)
string(APPEND TMP_RPM_DEBUGINFO_INSTALL "${part_}\n")
endforeach()
endif()
if(NOT DEFINED CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS)
set(CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS /usr /usr/src /usr/src/debug)
if(CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS_ADDITION)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Adding ${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS_ADDITION} to builtin omit list.")
endif()
list(APPEND CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS "${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS_ADDITION}")
endif()
endif()
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS= ${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS}")
endif()
list(LENGTH additional_sources_ len_)
if(len_)
list(REMOVE_DUPLICATES additional_sources_)
unset(additional_sources_all_)
foreach(source_ IN LISTS additional_sources_)
string(REPLACE "/" ";" split_source_ " ${source_}")
list(REMOVE_AT split_source_ 0)
unset(tmp_path_)
# Now generate all segments of the path
foreach(segment_ IN LISTS split_source_)
string(APPEND tmp_path_ "/${segment_}")
list(APPEND additional_sources_all_ "${tmp_path_}")
endforeach()
endforeach()
list(REMOVE_DUPLICATES additional_sources_all_)
list(REMOVE_ITEM additional_sources_all_
${CPACK_RPM_DEBUGINFO_EXCLUDE_DIRS})
unset(TMP_DEBUGINFO_ADDITIONAL_SOURCES)
foreach(source_ IN LISTS additional_sources_all_)
string(APPEND TMP_DEBUGINFO_ADDITIONAL_SOURCES "${source_}\n")
endforeach()
endif()
set(TMP_RPM_DEBUGINFO_INSTALL "${TMP_RPM_DEBUGINFO_INSTALL}" PARENT_SCOPE)
set(TMP_DEBUGINFO_ADDITIONAL_SOURCES "${TMP_DEBUGINFO_ADDITIONAL_SOURCES}"
PARENT_SCOPE)
endfunction()
function(cpack_rpm_variable_fallback OUTPUT_VAR_NAME)
set(FALLBACK_VAR_NAMES ${ARGN})
foreach(variable_name IN LISTS FALLBACK_VAR_NAMES)
if(${variable_name})
set(${OUTPUT_VAR_NAME} "${${variable_name}}" PARENT_SCOPE)
break()
endif()
endforeach()
endfunction()
function(cpack_rpm_generate_package)
# rpmbuild is the basic command for building RPM package
# it may be a simple (symbolic) link to rpm command.
find_program(RPMBUILD_EXECUTABLE rpmbuild)
# Check version of the rpmbuild tool this would be easier to
# track bugs with users and CPackRPM debug mode.
# We may use RPM version in order to check for available version dependent features
if(RPMBUILD_EXECUTABLE)
execute_process(COMMAND ${RPMBUILD_EXECUTABLE} --version
OUTPUT_VARIABLE _TMP_VERSION
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
string(REGEX REPLACE "^.* " ""
RPMBUILD_EXECUTABLE_VERSION
${_TMP_VERSION})
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: rpmbuild version is <${RPMBUILD_EXECUTABLE_VERSION}>")
endif()
endif()
if(NOT RPMBUILD_EXECUTABLE)
message(FATAL_ERROR "RPM package requires rpmbuild executable")
endif()
# Display lsb_release output if DEBUG mode enable
# This will help to diagnose problem with CPackRPM
# because we will know on which kind of Linux we are
if(CPACK_RPM_PACKAGE_DEBUG)
find_program(LSB_RELEASE_EXECUTABLE lsb_release)
if(LSB_RELEASE_EXECUTABLE)
execute_process(COMMAND ${LSB_RELEASE_EXECUTABLE} -a
OUTPUT_VARIABLE _TMP_LSB_RELEASE_OUTPUT
ERROR_QUIET
OUTPUT_STRIP_TRAILING_WHITESPACE)
string(REGEX REPLACE "\n" ", "
LSB_RELEASE_OUTPUT
${_TMP_LSB_RELEASE_OUTPUT})
else ()
set(LSB_RELEASE_OUTPUT "lsb_release not installed/found!")
endif()
message("CPackRPM:Debug: LSB_RELEASE = ${LSB_RELEASE_OUTPUT}")
endif()
# We may use RPM version in the future in order
# to shut down warning about space in buildtree
# some recent RPM version should support space in different places.
# not checked [yet].
if(CPACK_TOPLEVEL_DIRECTORY MATCHES ".* .*")
message(FATAL_ERROR "${RPMBUILD_EXECUTABLE} can't handle paths with spaces, use a build directory without spaces for building RPMs.")
endif()
# If rpmbuild is found
# we try to discover alien since we may be on non RPM distro like Debian.
# In this case we may try to to use more advanced features
# like generating RPM directly from DEB using alien.
# FIXME feature not finished (yet)
find_program(ALIEN_EXECUTABLE alien)
if(ALIEN_EXECUTABLE)
message(STATUS "alien found, we may be on a Debian based distro.")
endif()
# Are we packaging components ?
if(CPACK_RPM_PACKAGE_COMPONENT)
string(TOUPPER ${CPACK_RPM_PACKAGE_COMPONENT} CPACK_RPM_PACKAGE_COMPONENT_UPPER)
endif()
set(WDIR "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}")
#
# Use user-defined RPM specific variables value
# or generate reasonable default value from
# CPACK_xxx generic values.
# The variables comes from the needed (mandatory or not)
# values found in the RPM specification file aka ".spec" file.
# The variables which may/should be defined are:
#
# CPACK_RPM_PACKAGE_SUMMARY (mandatory)
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_SUMMARY"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_SUMMARY"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_SUMMARY")
endif()
if(NOT CPACK_RPM_PACKAGE_SUMMARY)
if(CPACK_PACKAGE_DESCRIPTION_SUMMARY)
set(CPACK_RPM_PACKAGE_SUMMARY ${CPACK_PACKAGE_DESCRIPTION_SUMMARY})
else()
# if neither var is defined lets use the name as summary
string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_SUMMARY)
endif()
endif()
# CPACK_RPM_PACKAGE_NAME (mandatory)
if(NOT CPACK_RPM_PACKAGE_NAME)
string(TOLOWER "${CPACK_PACKAGE_NAME}" CPACK_RPM_PACKAGE_NAME)
endif()
if(CPACK_RPM_PACKAGE_COMPONENT)
string(TOUPPER "${CPACK_RPM_MAIN_COMPONENT}"
CPACK_RPM_MAIN_COMPONENT_UPPER)
if(NOT CPACK_RPM_MAIN_COMPONENT_UPPER STREQUAL CPACK_RPM_PACKAGE_COMPONENT_UPPER)
string(APPEND CPACK_RPM_PACKAGE_NAME "-${CPACK_RPM_PACKAGE_COMPONENT}")
cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_NAME"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_NAME"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_NAME")
endif()
endif()
# CPACK_RPM_PACKAGE_VERSION (mandatory)
if(NOT CPACK_RPM_PACKAGE_VERSION)
if(NOT CPACK_PACKAGE_VERSION)
message(FATAL_ERROR "RPM package requires a package version")
endif()
set(CPACK_RPM_PACKAGE_VERSION ${CPACK_PACKAGE_VERSION})
endif()
# Replace '-' in version with '_'
# '-' character is an Illegal RPM version character
# it is illegal because it is used to separate
# RPM "Version" from RPM "Release"
string(REPLACE "-" "_" CPACK_RPM_PACKAGE_VERSION ${CPACK_RPM_PACKAGE_VERSION})
# CPACK_RPM_PACKAGE_ARCHITECTURE (mandatory)
if(NOT CPACK_RPM_PACKAGE_ARCHITECTURE)
execute_process(COMMAND uname "-m"
OUTPUT_VARIABLE CPACK_RPM_PACKAGE_ARCHITECTURE
OUTPUT_STRIP_TRAILING_WHITESPACE)
else()
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: using user-specified build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
endif()
endif()
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_ARCHITECTURE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_ARCHITECTURE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_ARCHITECTURE")
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: using component build arch = ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
endif()
endif()
if(${CPACK_RPM_PACKAGE_ARCHITECTURE} STREQUAL "noarch")
set(TMP_RPM_BUILDARCH "Buildarch: ${CPACK_RPM_PACKAGE_ARCHITECTURE}")
else()
set(TMP_RPM_BUILDARCH "")
endif()
# CPACK_RPM_PACKAGE_RELEASE
# The RPM release is the numbering of the RPM package ITSELF
# this is the version of the PACKAGING and NOT the version
# of the CONTENT of the package.
# You may well need to generate a new RPM package release
# without changing the version of the packaged software.
# This is the case when the packaging is buggy (not) the software :=)
# If not set, 1 is a good candidate
if(NOT CPACK_RPM_PACKAGE_RELEASE)
set(CPACK_RPM_PACKAGE_RELEASE "1")
endif()
if(CPACK_RPM_PACKAGE_RELEASE_DIST)
string(APPEND CPACK_RPM_PACKAGE_RELEASE "%{?dist}")
endif()
# CPACK_RPM_PACKAGE_LICENSE
if(NOT CPACK_RPM_PACKAGE_LICENSE)
set(CPACK_RPM_PACKAGE_LICENSE "unknown")
endif()
# CPACK_RPM_PACKAGE_GROUP
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_GROUP"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_GROUP"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_GROUP")
endif()
if(NOT CPACK_RPM_PACKAGE_GROUP)
set(CPACK_RPM_PACKAGE_GROUP "unknown")
endif()
# CPACK_RPM_PACKAGE_VENDOR
if(NOT CPACK_RPM_PACKAGE_VENDOR)
if(CPACK_PACKAGE_VENDOR)
set(CPACK_RPM_PACKAGE_VENDOR "${CPACK_PACKAGE_VENDOR}")
else()
set(CPACK_RPM_PACKAGE_VENDOR "unknown")
endif()
endif()
# CPACK_RPM_PACKAGE_SOURCE
# The name of the source tarball in case we generate a source RPM
# CPACK_RPM_PACKAGE_DESCRIPTION
# The variable content may be either
# - explicitly given by the user or
# - filled with the content of CPACK_PACKAGE_DESCRIPTION_FILE
# if it is defined
# - set to a default value
#
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_DESCRIPTION"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_DESCRIPTION"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_DESCRIPTION"
"CPACK_COMPONENT_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DESCRIPTION")
endif()
if(NOT CPACK_RPM_PACKAGE_DESCRIPTION)
if(CPACK_PACKAGE_DESCRIPTION_FILE)
file(READ ${CPACK_PACKAGE_DESCRIPTION_FILE} CPACK_RPM_PACKAGE_DESCRIPTION)
else ()
set(CPACK_RPM_PACKAGE_DESCRIPTION "no package description available")
endif ()
endif ()
# CPACK_RPM_COMPRESSION_TYPE
#
if (CPACK_RPM_COMPRESSION_TYPE)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: User Specified RPM compression type: ${CPACK_RPM_COMPRESSION_TYPE}")
endif()
if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "lzma")
set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.lzdio")
endif()
if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "xz")
set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w7.xzdio")
endif()
if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "bzip2")
set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.bzdio")
endif()
if(CPACK_RPM_COMPRESSION_TYPE STREQUAL "gzip")
set(CPACK_RPM_COMPRESSION_TYPE_TMP "%define _binary_payload w9.gzdio")
endif()
else()
set(CPACK_RPM_COMPRESSION_TYPE_TMP "")
endif()
if(NOT CPACK_RPM_PACKAGE_SOURCES)
if(CPACK_PACKAGE_RELOCATABLE OR CPACK_RPM_PACKAGE_RELOCATABLE)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Trying to build a relocatable package")
endif()
if(CPACK_SET_DESTDIR AND (NOT CPACK_SET_DESTDIR STREQUAL "I_ON"))
message("CPackRPM:Warning: CPACK_SET_DESTDIR is set (=${CPACK_SET_DESTDIR}) while requesting a relocatable package (CPACK_RPM_PACKAGE_RELOCATABLE is set): this is not supported, the package won't be relocatable.")
set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE)
else()
set(CPACK_RPM_PACKAGE_PREFIX ${CPACK_PACKAGING_INSTALL_PREFIX}) # kept for back compatibility (provided external RPM spec files)
cpack_rpm_prepare_relocation_paths()
set(CPACK_RPM_PACKAGE_RELOCATABLE TRUE)
endif()
endif()
else()
if(CPACK_RPM_PACKAGE_COMPONENT)
message(FATAL_ERROR "CPACK_RPM_PACKAGE_SOURCES parameter can not be used"
" in combination with CPACK_RPM_PACKAGE_COMPONENT parameter!")
endif()
set(CPACK_RPM_PACKAGE_RELOCATABLE FALSE) # disable relocatable option if building source RPM
endif()
execute_process(
COMMAND "${RPMBUILD_EXECUTABLE}" --querytags
OUTPUT_VARIABLE RPMBUILD_TAG_LIST
OUTPUT_STRIP_TRAILING_WHITESPACE)
string(REPLACE "\n" ";" RPMBUILD_TAG_LIST "${RPMBUILD_TAG_LIST}")
if(CPACK_RPM_PACKAGE_EPOCH)
set(TMP_RPM_EPOCH "Epoch: ${CPACK_RPM_PACKAGE_EPOCH}")
endif()
# Check if additional fields for RPM spec header are given
# There may be some COMPONENT specific variables as well
# If component specific var is not provided we use the global one
# for each component
foreach(_RPM_SPEC_HEADER URL REQUIRES SUGGESTS PROVIDES OBSOLETES PREFIX CONFLICTS AUTOPROV AUTOREQ AUTOREQPROV REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: processing ${_RPM_SPEC_HEADER}")
endif()
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_PACKAGE_${_RPM_SPEC_HEADER}"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_PACKAGE_${_RPM_SPEC_HEADER}")
endif()
if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER})
# Prefix can be replaced by Prefixes but the old version stil works so we'll ignore it for now
# Requires* is a special case because it gets transformed to Requires(pre/post/preun/postun)
# Auto* is a special case because the tags can not be queried by querytags rpmbuild flag
set(special_case_tags_ PREFIX REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN AUTOPROV AUTOREQ AUTOREQPROV)
if(NOT _RPM_SPEC_HEADER IN_LIST RPMBUILD_TAG_LIST AND NOT _RPM_SPEC_HEADER IN_LIST special_case_tags_)
message(AUTHOR_WARNING "CPackRPM:Warning: ${_RPM_SPEC_HEADER} not "
"supported in provided rpmbuild. Tag will not be used.")
continue()
endif()
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: using CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}")
endif()
set(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}})
endif()
# Treat the RPM Spec keyword iff it has been properly defined
if(DEFINED CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP)
# Transform NAME --> Name e.g. PROVIDES --> Provides
# The Upper-case first letter and lowercase tail is the
# appropriate value required in the final RPM spec file.
string(SUBSTRING ${_RPM_SPEC_HEADER} 1 -1 _PACKAGE_HEADER_TAIL)
string(TOLOWER "${_PACKAGE_HEADER_TAIL}" _PACKAGE_HEADER_TAIL)
string(SUBSTRING ${_RPM_SPEC_HEADER} 0 1 _PACKAGE_HEADER_NAME)
string(APPEND _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_TAIL}")
# The following keywords require parentheses around the "pre" or "post" suffix in the final RPM spec file.
set(SCRIPTS_REQUIREMENTS_LIST REQUIRES_PRE REQUIRES_POST REQUIRES_PREUN REQUIRES_POSTUN)
list(FIND SCRIPTS_REQUIREMENTS_LIST ${_RPM_SPEC_HEADER} IS_SCRIPTS_REQUIREMENT_FOUND)
if(NOT ${IS_SCRIPTS_REQUIREMENT_FOUND} EQUAL -1)
string(REPLACE "_" "(" _PACKAGE_HEADER_NAME "${_PACKAGE_HEADER_NAME}")
string(APPEND _PACKAGE_HEADER_NAME ")")
endif()
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: User defined ${_PACKAGE_HEADER_NAME}:\n ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}")
endif()
set(TMP_RPM_${_RPM_SPEC_HEADER} "${_PACKAGE_HEADER_NAME}: ${CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP}")
unset(CPACK_RPM_PACKAGE_${_RPM_SPEC_HEADER}_TMP)
endif()
endforeach()
# CPACK_RPM_SPEC_INSTALL_POST
# May be used to define a RPM post intallation script
# for example setting it to "/bin/true" may prevent
# rpmbuild from stripping binaries.
if(CPACK_RPM_SPEC_INSTALL_POST)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: User defined CPACK_RPM_SPEC_INSTALL_POST = ${CPACK_RPM_SPEC_INSTALL_POST}")
endif()
set(TMP_RPM_SPEC_INSTALL_POST "%define __spec_install_post ${CPACK_RPM_SPEC_INSTALL_POST}")
endif()
# CPACK_RPM_POST_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_INSTALL_SCRIPT_FILE)
# CPACK_RPM_POST_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_POST_UNINSTALL_SCRIPT_FILE)
# May be used to embed a post (un)installation script in the spec file.
# The referred script file(s) will be read and directly
# put after the %post or %postun section
# ----------------------------------------------------------------
# CPACK_RPM_PRE_INSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_INSTALL_SCRIPT_FILE)
# CPACK_RPM_PRE_UNINSTALL_SCRIPT_FILE (or CPACK_RPM_<COMPONENT>_PRE_UNINSTALL_SCRIPT_FILE)
# May be used to embed a pre (un)installation script in the spec file.
# The referred script file(s) will be read and directly
# put after the %pre or %preun section
foreach(RPM_SCRIPT_FILE_TYPE_ "INSTALL" "UNINSTALL")
foreach(RPM_SCRIPT_FILE_TIME_ "PRE" "POST")
set("CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE"
"${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE}")
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE")
endif()
# Handle file if it has been specified
if(CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE)
if(EXISTS ${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE})
file(READ ${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE}
"CPACK_RPM_SPEC_${RPM_SCRIPT_FILE_TIME_}${RPM_SCRIPT_FILE_TYPE_}")
else()
message("CPackRPM:Warning: CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_SCRIPT_FILE <${CPACK_RPM_${RPM_SCRIPT_FILE_TIME_}_${RPM_SCRIPT_FILE_TYPE_}_READ_FILE}> does not exists - ignoring")
endif()
else()
# reset SPEC var value if no file has been specified
# (either globally or component-wise)
set("CPACK_RPM_SPEC_${RPM_SCRIPT_FILE_TIME_}${RPM_SCRIPT_FILE_TYPE_}" "")
endif()
endforeach()
endforeach()
# CPACK_RPM_CHANGELOG_FILE
# May be used to embed a changelog in the spec file.
# The referred file will be read and directly put after the %changelog section
if(CPACK_RPM_CHANGELOG_FILE)
if(EXISTS ${CPACK_RPM_CHANGELOG_FILE})
file(READ ${CPACK_RPM_CHANGELOG_FILE} CPACK_RPM_SPEC_CHANGELOG)
else()
message(SEND_ERROR "CPackRPM:Warning: CPACK_RPM_CHANGELOG_FILE <${CPACK_RPM_CHANGELOG_FILE}> does not exists - ignoring")
endif()
else()
set(CPACK_RPM_SPEC_CHANGELOG "* Sun Jul 4 2010 Eric Noulard <eric.noulard@gmail.com> - ${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}\n Generated by CPack RPM (no Changelog file were provided)")
endif()
# CPACK_RPM_SPEC_MORE_DEFINE
# This is a generated spec rpm file spaceholder
if(CPACK_RPM_SPEC_MORE_DEFINE)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: User defined more define spec line specified:\n ${CPACK_RPM_SPEC_MORE_DEFINE}")
endif()
endif()
# Now we may create the RPM build tree structure
set(CPACK_RPM_ROOTDIR "${CPACK_TOPLEVEL_DIRECTORY}")
message(STATUS "CPackRPM:Debug: Using CPACK_RPM_ROOTDIR=${CPACK_RPM_ROOTDIR}")
# Prepare RPM build tree
file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR})
file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/tmp)
file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/BUILD)
file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/RPMS)
file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SOURCES)
file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SPECS)
file(MAKE_DIRECTORY ${CPACK_RPM_ROOTDIR}/SRPMS)
# it seems rpmbuild can't handle spaces in the path
# neither escaping (as below) nor putting quotes around the path seem to help
#string(REGEX REPLACE " " "\\\\ " CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
set(CPACK_RPM_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}")
cpack_rpm_prepare_content_list()
# In component case, put CPACK_ABSOLUTE_DESTINATION_FILES_<COMPONENT>
# into CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
# otherwise, put CPACK_ABSOLUTE_DESTINATION_FILES
# This must be done BEFORE the CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL handling
if(CPACK_RPM_PACKAGE_COMPONENT)
if(CPACK_ABSOLUTE_DESTINATION_FILES)
cpack_rpm_variable_fallback("COMPONENT_FILES_TAG"
"CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT}"
"CPACK_ABSOLUTE_DESTINATION_FILES_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}")
set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${${COMPONENT_FILES_TAG}}")
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Handling Absolute Destination Files: <${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}>")
message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}")
endif()
endif()
else()
if(CPACK_ABSOLUTE_DESTINATION_FILES)
set(CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL "${CPACK_ABSOLUTE_DESTINATION_FILES}")
endif()
endif()
# In component case, set CPACK_RPM_USER_FILELIST_INTERNAL with CPACK_RPM_<COMPONENT>_USER_FILELIST.
set(CPACK_RPM_USER_FILELIST_INTERNAL "")
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_USER_FILELIST_INTERNAL"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_FILELIST"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_USER_FILELIST")
if(CPACK_RPM_PACKAGE_DEBUG AND CPACK_RPM_USER_FILELIST_INTERNAL)
message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>")
message("CPackRPM:Debug: in component = ${CPACK_RPM_PACKAGE_COMPONENT}")
endif()
elseif(CPACK_RPM_USER_FILELIST)
set(CPACK_RPM_USER_FILELIST_INTERNAL "${CPACK_RPM_USER_FILELIST}")
endif()
# Handle user specified file line list in CPACK_RPM_USER_FILELIST_INTERNAL
# Remove those files from CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
# or CPACK_RPM_INSTALL_FILES,
# hence it must be done before these auto-generated lists are processed.
if(CPACK_RPM_USER_FILELIST_INTERNAL)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Handling User Filelist: <${CPACK_RPM_USER_FILELIST_INTERNAL}>")
endif()
# Create CMake list from CPACK_RPM_INSTALL_FILES
string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST
"${CPACK_RPM_INSTALL_FILES_LIST}")
string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST
"${CPACK_RPM_INSTALL_FILES_LIST}")
set(CPACK_RPM_USER_INSTALL_FILES "")
foreach(F IN LISTS CPACK_RPM_USER_FILELIST_INTERNAL)
string(REGEX REPLACE "%[A-Za-z]+(\\([^()]*\\))? " "" F_PATH ${F})
string(REGEX MATCH "(%[A-Za-z]+(\\([^()]*\\))? )*" F_PREFIX ${F})
string(STRIP ${F_PREFIX} F_PREFIX)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: F_PREFIX=<${F_PREFIX}>, F_PATH=<${F_PATH}>")
endif()
if(F_PREFIX)
string(APPEND F_PREFIX " ")
endif()
# Rebuild the user list file
string(APPEND CPACK_RPM_USER_INSTALL_FILES "${F_PREFIX}\"${F_PATH}\"\n")
# Remove from CPACK_RPM_INSTALL_FILES and CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL
list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${F_PATH})
# ABSOLUTE destination files list may not exists at all
if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
list(REMOVE_ITEM CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL ${F_PATH})
endif()
endforeach()
# Rebuild CPACK_RPM_INSTALL_FILES
set(CPACK_RPM_INSTALL_FILES "")
foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
string(APPEND CPACK_RPM_INSTALL_FILES "\"${F}\"\n")
endforeach()
else()
set(CPACK_RPM_USER_INSTALL_FILES "")
endif()
if (CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: Handling Absolute Destination Files: ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL}")
endif()
# Remove trailing space
string(STRIP "${CPACK_RPM_INSTALL_FILES}" CPACK_RPM_INSTALL_FILES_LIST)
# Transform endline separated - string into CMake List
string(REPLACE "\n" ";" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
# Remove unnecessary quotes
string(REPLACE "\"" "" CPACK_RPM_INSTALL_FILES_LIST "${CPACK_RPM_INSTALL_FILES_LIST}")
# Remove ABSOLUTE install file from INSTALL FILE LIST
list(REMOVE_ITEM CPACK_RPM_INSTALL_FILES_LIST ${CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL})
# Rebuild INSTALL_FILES
set(CPACK_RPM_INSTALL_FILES "")
foreach(F IN LISTS CPACK_RPM_INSTALL_FILES_LIST)
string(APPEND CPACK_RPM_INSTALL_FILES "\"${F}\"\n")
endforeach()
# Build ABSOLUTE_INSTALL_FILES
set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "")
foreach(F IN LISTS CPACK_ABSOLUTE_DESTINATION_FILES_INTERNAL)
string(APPEND CPACK_RPM_ABSOLUTE_INSTALL_FILES "%config \"${F}\"\n")
endforeach()
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: CPACK_RPM_ABSOLUTE_INSTALL_FILES=${CPACK_RPM_ABSOLUTE_INSTALL_FILES}")
message("CPackRPM:Debug: CPACK_RPM_INSTALL_FILES=${CPACK_RPM_INSTALL_FILES}")
endif()
else()
# reset vars in order to avoid leakage of value(s) from one component to another
set(CPACK_RPM_ABSOLUTE_INSTALL_FILES "")
endif()
cpack_rpm_variable_fallback("CPACK_RPM_DEBUGINFO_PACKAGE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_DEBUGINFO_PACKAGE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEBUGINFO_PACKAGE"
"CPACK_RPM_DEBUGINFO_PACKAGE")
if(CPACK_RPM_DEBUGINFO_PACKAGE OR (CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE AND NOT GENERATE_SPEC_PARTS))
cpack_rpm_variable_fallback("CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_BUILD_SOURCE_DIRS_PREFIX"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_BUILD_SOURCE_DIRS_PREFIX"
"CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX")
if(NOT CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX)
set(CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX "/usr/src/debug/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}")
endif()
# handle cases where path contains extra slashes (e.g. /a//b/ instead of
# /a/b)
get_filename_component(CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX
"${CPACK_RPM_BUILD_SOURCE_DIRS_PREFIX}" ABSOLUTE)
if(CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE AND GENERATE_SPEC_PARTS)
file(WRITE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_COMPONENT}.files"
"${CPACK_RPM_INSTALL_FILES}")
else()
if(CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE AND CPACK_RPM_PACKAGE_COMPONENT)
# this part is only required by components packaging - with monolithic
# packages we can be certain that there are no other components present
# so CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE is a noop
if(CPACK_RPM_DEBUGINFO_PACKAGE)
# only add current package files to debuginfo list if debuginfo
# generation is enabled for current package
string(STRIP "${CPACK_RPM_INSTALL_FILES}" install_files_)
string(REPLACE "\n" ";" install_files_ "${install_files_}")
string(REPLACE "\"" "" install_files_ "${install_files_}")
else()
unset(install_files_)
endif()
file(GLOB files_ "${CPACK_RPM_DIRECTORY}/SPECS/*.files")
foreach(f_ IN LISTS files_)
file(READ "${f_}" tmp_)
string(APPEND install_files_ ";${tmp_}")
endforeach()
# if there were other components/groups so we need to move files from them
# to current component otherwise those files won't be found
file(GLOB components_ LIST_DIRECTORIES true RELATIVE
"${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}"
"${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}/*")
foreach(component_ IN LISTS components_)
string(TOUPPER "${component_}" component_dir_upper_)
if(component_dir_upper_ STREQUAL CPACK_RPM_PACKAGE_COMPONENT_UPPER)
# skip current component
continue()
endif()
file(GLOB_RECURSE files_for_move_ LIST_DIRECTORIES false RELATIVE
"${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}/${component_}"
"${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}/${component_}/*")
foreach(f_ IN LISTS files_for_move_)
get_filename_component(dir_path_ "${f_}" DIRECTORY)
set(src_file_
"${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}/${component_}/${f_}")
# check that we are not overriding an existing file that doesn't
# match the file that we want to copy
if(EXISTS "${src_file_}" AND EXISTS "${WDIR}/${f_}")
execute_process(
COMMAND ${CMAKE_COMMAND} -E compare_files "${src_file_}" "${WDIR}/${f_}"
RESULT_VARIABLE res_
)
if(res_)
message(FATAL_ERROR "CPackRPM:Error: File on path '${WDIR}/${f_}'"
" already exists but is a different than the one in component"
" '${component_}'! Packages will not be generated.")
endif()
endif()
file(MAKE_DIRECTORY "${WDIR}/${dir_path_}")
file(RENAME "${src_file_}"
"${WDIR}/${f_}")
endforeach()
endforeach()
cpack_rpm_debugsymbol_check("${install_files_}" "${WDIR}")
else()
string(STRIP "${CPACK_RPM_INSTALL_FILES}" install_files_)
string(REPLACE "\n" ";" install_files_ "${install_files_}")
string(REPLACE "\"" "" install_files_ "${install_files_}")
cpack_rpm_debugsymbol_check("${install_files_}" "${WDIR}")
endif()
if(TMP_DEBUGINFO_ADDITIONAL_SOURCES)
set(TMP_RPM_DEBUGINFO "
# Modified version of %%debug_package macro
# defined in /usr/lib/rpm/macros as that one
# can't handle injection of extra source files.
%ifnarch noarch
%global __debug_package 1
%package debuginfo
Summary: Debug information for package %{name}
Group: Development/Debug
AutoReqProv: 0
%description debuginfo
This package provides debug information for package %{name}.
Debug information is useful when developing applications that use this
package or when debugging this package.
%files debuginfo -f debugfiles.list
%defattr(-,root,root)
${TMP_DEBUGINFO_ADDITIONAL_SOURCES}
%endif
")
elseif(CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE)
message(AUTHOR_WARNING "CPackRPM:Warning: debuginfo package was requested"
" but will not be generated as no source files were found!")
else()
message(AUTHOR_WARNING "CPackRPM:Warning: debuginfo package was requested"
" but will not be generated as no source files were found! Component: '"
"${CPACK_RPM_PACKAGE_COMPONENT}'.")
endif()
endif()
endif()
# Prepare install files
cpack_rpm_prepare_install_files(
"${CPACK_RPM_INSTALL_FILES}"
"${WDIR}"
"${RPM_USED_PACKAGE_PREFIXES}"
"${CPACK_RPM_PACKAGE_RELOCATABLE}"
)
# set default user and group
foreach(_PERM_TYPE "USER" "GROUP")
if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE})
set(TMP_DEFAULT_${_PERM_TYPE} "${CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}}")
elseif(CPACK_RPM_DEFAULT_${_PERM_TYPE})
set(TMP_DEFAULT_${_PERM_TYPE} "${CPACK_RPM_DEFAULT_${_PERM_TYPE}}")
else()
set(TMP_DEFAULT_${_PERM_TYPE} "root")
endif()
endforeach()
# set default file and dir permissions
foreach(_PERM_TYPE "FILE" "DIR")
if(CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS)
get_unix_permissions_octal_notation("CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS" "TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
set(_PERMISSIONS_VAR "CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
elseif(CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS)
get_unix_permissions_octal_notation("CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS" "TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
set(_PERMISSIONS_VAR "CPACK_RPM_DEFAULT_${_PERM_TYPE}_PERMISSIONS")
else()
set(TMP_DEFAULT_${_PERM_TYPE}_PERMISSIONS "-")
endif()
endforeach()
# The name of the final spec file to be used by rpmbuild
set(CPACK_RPM_BINARY_SPECFILE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_NAME}.spec")
# Print out some debug information if we were asked for that
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: CPACK_TOPLEVEL_DIRECTORY = ${CPACK_TOPLEVEL_DIRECTORY}")
message("CPackRPM:Debug: CPACK_TOPLEVEL_TAG = ${CPACK_TOPLEVEL_TAG}")
message("CPackRPM:Debug: CPACK_TEMPORARY_DIRECTORY = ${CPACK_TEMPORARY_DIRECTORY}")
message("CPackRPM:Debug: CPACK_OUTPUT_FILE_NAME = ${CPACK_OUTPUT_FILE_NAME}")
message("CPackRPM:Debug: CPACK_OUTPUT_FILE_PATH = ${CPACK_OUTPUT_FILE_PATH}")
message("CPackRPM:Debug: CPACK_PACKAGE_FILE_NAME = ${CPACK_PACKAGE_FILE_NAME}")
message("CPackRPM:Debug: CPACK_RPM_BINARY_SPECFILE = ${CPACK_RPM_BINARY_SPECFILE}")
message("CPackRPM:Debug: CPACK_PACKAGE_INSTALL_DIRECTORY = ${CPACK_PACKAGE_INSTALL_DIRECTORY}")
message("CPackRPM:Debug: CPACK_TEMPORARY_PACKAGE_FILE_NAME = ${CPACK_TEMPORARY_PACKAGE_FILE_NAME}")
endif()
#
# USER generated/provided spec file handling.
#
# We can have a component specific spec file.
if(CPACK_RPM_PACKAGE_COMPONENT)
cpack_rpm_variable_fallback("CPACK_RPM_USER_BINARY_SPECFILE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_USER_BINARY_SPECFILE"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_USER_BINARY_SPECFILE")
endif()
cpack_rpm_variable_fallback("CPACK_RPM_FILE_NAME"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_FILE_NAME"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_FILE_NAME"
"CPACK_RPM_FILE_NAME")
if(NOT CPACK_RPM_FILE_NAME STREQUAL "RPM-DEFAULT")
if(CPACK_RPM_FILE_NAME)
if(NOT CPACK_RPM_FILE_NAME MATCHES ".*\\.rpm")
message(FATAL_ERROR "'${CPACK_RPM_FILE_NAME}' is not a valid RPM package file name as it must end with '.rpm'!")
endif()
else()
# old file name format for back compatibility
string(TOUPPER "${CPACK_RPM_MAIN_COMPONENT}"
CPACK_RPM_MAIN_COMPONENT_UPPER)
if(CPACK_RPM_MAIN_COMPONENT_UPPER STREQUAL CPACK_RPM_PACKAGE_COMPONENT_UPPER)
# this is the main component so ignore the component filename part
set(CPACK_RPM_FILE_NAME "${CPACK_PACKAGE_FILE_NAME}.rpm")
else()
set(CPACK_RPM_FILE_NAME "${CPACK_OUTPUT_FILE_NAME}")
endif()
endif()
# else example:
#set(CPACK_RPM_FILE_NAME "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}-${CPACK_RPM_PACKAGE_RELEASE}-${CPACK_RPM_PACKAGE_ARCHITECTURE}.rpm")
if(CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE AND GENERATE_SPEC_PARTS)
string(TOLOWER "${CPACK_RPM_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}.*\\.rpm" expected_filename_)
file(WRITE "${CPACK_RPM_ROOTDIR}/SPECS/${CPACK_RPM_PACKAGE_COMPONENT}.rpm_name"
"${expected_filename_};${CPACK_RPM_FILE_NAME}")
elseif(NOT CPACK_RPM_DEBUGINFO_PACKAGE)
set(FILE_NAME_DEFINE "%define _rpmfilename ${CPACK_RPM_FILE_NAME}")
endif()
endif()
if(CPACK_RPM_PACKAGE_SOURCES) # source rpm
set(archive_name_ "${CPACK_RPM_PACKAGE_NAME}-${CPACK_RPM_PACKAGE_VERSION}")
execute_process(
COMMAND ${CMAKE_COMMAND} -E tar "cfvz" "${CPACK_RPM_DIRECTORY}/SOURCES/${archive_name_}.tar.gz" "${CPACK_PACKAGE_FILE_NAME}"
WORKING_DIRECTORY ${CPACK_RPM_DIRECTORY}
)
set(TMP_RPM_SOURCE "Source: ${archive_name_}.tar.gz")
if(CPACK_RPM_BUILDREQUIRES)
set(TMP_RPM_BUILD_REQUIRES "BuildRequires: ${CPACK_RPM_BUILDREQUIRES}")
endif()
# Disable debuginfo packages - srpm generates invalid packages due to
# releasing control to cpack to generate binary packages.
# Note however that this doesn't prevent cpack to generate debuginfo
# packages when run from srpm with --rebuild.
set(TMP_RPM_DISABLE_DEBUGINFO "%define debug_package %{nil}")
if(NOT CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX)
set(CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX "/")
endif()
set(TMP_RPM_BUILD
"
%build
mkdir cpack_rpm_build_dir
cd cpack_rpm_build_dir
cmake ${CPACK_RPM_SOURCE_PKG_BUILD_PARAMS} -DCPACK_PACKAGING_INSTALL_PREFIX=${CPACK_RPM_SOURCE_PKG_PACKAGING_INSTALL_PREFIX} ../${CPACK_PACKAGE_FILE_NAME}
make %{?_smp_mflags}" # %{?_smp_mflags} -> -j option
)
set(TMP_RPM_INSTALL
"
cd cpack_rpm_build_dir
cpack -G RPM
mv *.rpm %_rpmdir"
)
set(TMP_RPM_PREP "%setup -c")
set(RPMBUILD_FLAGS "-bs")
file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
"# Restore old style debuginfo creation for rpm >= 4.14.
%undefine _debugsource_packages
%undefine _debuginfo_subpackages
# -*- rpm-spec -*-
BuildRoot: %_topdir/\@CPACK_PACKAGE_FILE_NAME\@
Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@
Name: \@CPACK_RPM_PACKAGE_NAME\@
Version: \@CPACK_RPM_PACKAGE_VERSION\@
Release: \@CPACK_RPM_PACKAGE_RELEASE\@
License: \@CPACK_RPM_PACKAGE_LICENSE\@
Group: \@CPACK_RPM_PACKAGE_GROUP\@
Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@
\@TMP_RPM_SOURCE\@
\@TMP_RPM_BUILD_REQUIRES\@
\@TMP_RPM_BUILDARCH\@
\@TMP_RPM_PREFIXES\@
\@TMP_RPM_DISABLE_DEBUGINFO\@
%define _rpmdir %_topdir/RPMS
%define _srcrpmdir %_topdir/SRPMS
\@FILE_NAME_DEFINE\@
%define _unpackaged_files_terminate_build 0
\@TMP_RPM_SPEC_INSTALL_POST\@
\@CPACK_RPM_SPEC_MORE_DEFINE\@
\@CPACK_RPM_COMPRESSION_TYPE_TMP\@
%description
\@CPACK_RPM_PACKAGE_DESCRIPTION\@
# This is a shortcutted spec file generated by CMake RPM generator
# we skip _install step because CPack does that for us.
# We do only save CPack installed tree in _prepr
# and then restore it in build.
%prep
\@TMP_RPM_PREP\@
\@TMP_RPM_BUILD\@
#p build
%install
\@TMP_RPM_INSTALL\@
%clean
%changelog
\@CPACK_RPM_SPEC_CHANGELOG\@
"
)
elseif(GENERATE_SPEC_PARTS) # binary rpm with single debuginfo package
file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
"# -*- rpm-spec -*-
%package -n \@CPACK_RPM_PACKAGE_NAME\@
Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@
Version: \@CPACK_RPM_PACKAGE_VERSION\@
Release: \@CPACK_RPM_PACKAGE_RELEASE\@
License: \@CPACK_RPM_PACKAGE_LICENSE\@
Group: \@CPACK_RPM_PACKAGE_GROUP\@
Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@
\@TMP_RPM_URL\@
\@TMP_RPM_REQUIRES\@
\@TMP_RPM_REQUIRES_PRE\@
\@TMP_RPM_REQUIRES_POST\@
\@TMP_RPM_REQUIRES_PREUN\@
\@TMP_RPM_REQUIRES_POSTUN\@
\@TMP_RPM_PROVIDES\@
\@TMP_RPM_OBSOLETES\@
\@TMP_RPM_CONFLICTS\@
\@TMP_RPM_SUGGESTS\@
\@TMP_RPM_AUTOPROV\@
\@TMP_RPM_AUTOREQ\@
\@TMP_RPM_AUTOREQPROV\@
\@TMP_RPM_BUILDARCH\@
\@TMP_RPM_PREFIXES\@
\@TMP_RPM_EPOCH\@
%description -n \@CPACK_RPM_PACKAGE_NAME\@
\@CPACK_RPM_PACKAGE_DESCRIPTION\@
%files -n \@CPACK_RPM_PACKAGE_NAME\@
%defattr(\@TMP_DEFAULT_FILE_PERMISSIONS\@,\@TMP_DEFAULT_USER\@,\@TMP_DEFAULT_GROUP\@,\@TMP_DEFAULT_DIR_PERMISSIONS\@)
\@CPACK_RPM_INSTALL_FILES\@
\@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@
\@CPACK_RPM_USER_INSTALL_FILES\@
"
)
else() # binary rpm
if(CPACK_RPM_DEBUGINFO_SINGLE_PACKAGE)
# find generated spec file and take its name
file(GLOB spec_files_ "${CPACK_RPM_DIRECTORY}/SPECS/*.spec")
foreach(f_ IN LISTS spec_files_)
file(READ "${f_}" tmp_)
string(APPEND TMP_OTHER_COMPONENTS "\n${tmp_}\n")
endforeach()
endif()
# We should generate a USER spec file template:
# - either because the user asked for it : CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE
# - or the user did not provide one : NOT CPACK_RPM_USER_BINARY_SPECFILE
set(RPMBUILD_FLAGS "-bb")
if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE OR NOT CPACK_RPM_USER_BINARY_SPECFILE)
file(WRITE ${CPACK_RPM_BINARY_SPECFILE}.in
"# Restore old style debuginfo creation for rpm >= 4.14.
%undefine _debugsource_packages
%undefine _debuginfo_subpackages
# -*- rpm-spec -*-
BuildRoot: %_topdir/\@CPACK_PACKAGE_FILE_NAME\@\@CPACK_RPM_PACKAGE_COMPONENT_PART_PATH\@
Summary: \@CPACK_RPM_PACKAGE_SUMMARY\@
Name: \@CPACK_RPM_PACKAGE_NAME\@
Version: \@CPACK_RPM_PACKAGE_VERSION\@
Release: \@CPACK_RPM_PACKAGE_RELEASE\@
License: \@CPACK_RPM_PACKAGE_LICENSE\@
Group: \@CPACK_RPM_PACKAGE_GROUP\@
Vendor: \@CPACK_RPM_PACKAGE_VENDOR\@
\@TMP_RPM_URL\@
\@TMP_RPM_REQUIRES\@
\@TMP_RPM_REQUIRES_PRE\@
\@TMP_RPM_REQUIRES_POST\@
\@TMP_RPM_REQUIRES_PREUN\@
\@TMP_RPM_REQUIRES_POSTUN\@
\@TMP_RPM_PROVIDES\@
\@TMP_RPM_OBSOLETES\@
\@TMP_RPM_CONFLICTS\@
\@TMP_RPM_SUGGESTS\@
\@TMP_RPM_AUTOPROV\@
\@TMP_RPM_AUTOREQ\@
\@TMP_RPM_AUTOREQPROV\@
\@TMP_RPM_BUILDARCH\@
\@TMP_RPM_PREFIXES\@
\@TMP_RPM_EPOCH\@
\@TMP_RPM_DEBUGINFO\@
%define _rpmdir %_topdir/RPMS
%define _srcrpmdir %_topdir/SRPMS
\@FILE_NAME_DEFINE\@
%define _unpackaged_files_terminate_build 0
\@TMP_RPM_SPEC_INSTALL_POST\@
\@CPACK_RPM_SPEC_MORE_DEFINE\@
\@CPACK_RPM_COMPRESSION_TYPE_TMP\@
%description
\@CPACK_RPM_PACKAGE_DESCRIPTION\@
# This is a shortcutted spec file generated by CMake RPM generator
# we skip _install step because CPack does that for us.
# We do only save CPack installed tree in _prepr
# and then restore it in build.
%prep
mv $RPM_BUILD_ROOT %_topdir/tmpBBroot
%install
if [ -e $RPM_BUILD_ROOT ];
then
rm -rf $RPM_BUILD_ROOT
fi
mv %_topdir/tmpBBroot $RPM_BUILD_ROOT
\@TMP_RPM_DEBUGINFO_INSTALL\@
%clean
%post
\@RPM_SYMLINK_POSTINSTALL\@
\@CPACK_RPM_SPEC_POSTINSTALL\@
%postun
\@CPACK_RPM_SPEC_POSTUNINSTALL\@
%pre
\@CPACK_RPM_SPEC_PREINSTALL\@
%preun
\@CPACK_RPM_SPEC_PREUNINSTALL\@
%files
%defattr(\@TMP_DEFAULT_FILE_PERMISSIONS\@,\@TMP_DEFAULT_USER\@,\@TMP_DEFAULT_GROUP\@,\@TMP_DEFAULT_DIR_PERMISSIONS\@)
\@CPACK_RPM_INSTALL_FILES\@
\@CPACK_RPM_ABSOLUTE_INSTALL_FILES\@
\@CPACK_RPM_USER_INSTALL_FILES\@
%changelog
\@CPACK_RPM_SPEC_CHANGELOG\@
\@TMP_OTHER_COMPONENTS\@
"
)
endif()
# Stop here if we were asked to only generate a template USER spec file
# The generated file may then be used as a template by user who wants
# to customize their own spec file.
if(CPACK_RPM_GENERATE_USER_BINARY_SPECFILE_TEMPLATE)
message(FATAL_ERROR "CPackRPM: STOP here Generated USER binary spec file template is: ${CPACK_RPM_BINARY_SPECFILE}.in")
endif()
endif()
# After that we may either use a user provided spec file
# or generate one using appropriate variables value.
if(CPACK_RPM_USER_BINARY_SPECFILE)
# User may have specified SPECFILE just use it
message("CPackRPM: Will use USER specified spec file: ${CPACK_RPM_USER_BINARY_SPECFILE}")
# The user provided file is processed for @var replacement
configure_file(${CPACK_RPM_USER_BINARY_SPECFILE} ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
else()
# No User specified spec file, will use the generated spec file
message("CPackRPM: Will use GENERATED spec file: ${CPACK_RPM_BINARY_SPECFILE}")
# Note the just created file is processed for @var replacement
configure_file(${CPACK_RPM_BINARY_SPECFILE}.in ${CPACK_RPM_BINARY_SPECFILE} @ONLY)
endif()
if(NOT GENERATE_SPEC_PARTS) # generate package
if(RPMBUILD_EXECUTABLE)
# Now call rpmbuild using the SPECFILE
execute_process(
COMMAND "${RPMBUILD_EXECUTABLE}" ${RPMBUILD_FLAGS}
--define "_topdir ${CPACK_RPM_DIRECTORY}"
--buildroot "%_topdir/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
--target "${CPACK_RPM_PACKAGE_ARCHITECTURE}"
"${CPACK_RPM_BINARY_SPECFILE}"
WORKING_DIRECTORY "${CPACK_TOPLEVEL_DIRECTORY}/${CPACK_PACKAGE_FILE_NAME}${CPACK_RPM_PACKAGE_COMPONENT_PART_PATH}"
RESULT_VARIABLE CPACK_RPMBUILD_EXEC_RESULT
ERROR_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err"
OUTPUT_FILE "${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out")
if(CPACK_RPM_PACKAGE_DEBUG OR CPACK_RPMBUILD_EXEC_RESULT)
file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err RPMBUILDERR)
file(READ ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out RPMBUILDOUT)
message("CPackRPM:Debug: You may consult rpmbuild logs in: ")
message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.err")
message("CPackRPM:Debug: *** ${RPMBUILDERR} ***")
message("CPackRPM:Debug: - ${CPACK_TOPLEVEL_DIRECTORY}/rpmbuild${CPACK_RPM_PACKAGE_NAME}.out")
message("CPackRPM:Debug: *** ${RPMBUILDOUT} ***")
endif()
else()
if(ALIEN_EXECUTABLE)
message(FATAL_ERROR "RPM packaging through alien not done (yet)")
endif()
endif()
# find generated rpm files and take their names
file(GLOB_RECURSE GENERATED_FILES "${CPACK_RPM_DIRECTORY}/RPMS/*.rpm"
"${CPACK_RPM_DIRECTORY}/SRPMS/*.rpm")
if(NOT GENERATED_FILES)
message(FATAL_ERROR "RPM package was not generated! ${CPACK_RPM_DIRECTORY}")
endif()
unset(expected_filenames_)
unset(filenames_)
if(CPACK_RPM_DEBUGINFO_PACKAGE AND NOT CPACK_RPM_FILE_NAME STREQUAL "RPM-DEFAULT")
list(APPEND expected_filenames_
"${CPACK_RPM_PACKAGE_NAME}-${CPACK_PACKAGE_VERSION}.*\\.rpm")
list(APPEND filenames_ "${CPACK_RPM_FILE_NAME}")
endif()
if(CPACK_RPM_DEBUGINFO_PACKAGE)
cpack_rpm_variable_fallback("CPACK_RPM_DEBUGINFO_FILE_NAME"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT}_DEBUGINFO_FILE_NAME"
"CPACK_RPM_${CPACK_RPM_PACKAGE_COMPONENT_UPPER}_DEBUGINFO_FILE_NAME"
"CPACK_RPM_DEBUGINFO_FILE_NAME")
if(CPACK_RPM_DEBUGINFO_FILE_NAME AND
NOT CPACK_RPM_DEBUGINFO_FILE_NAME STREQUAL "RPM-DEFAULT")
list(APPEND expected_filenames_
"${CPACK_RPM_PACKAGE_NAME}-debuginfo-${CPACK_PACKAGE_VERSION}.*\\.rpm")
string(REPLACE "@cpack_component@" "${CPACK_RPM_PACKAGE_COMPONENT}"
CPACK_RPM_DEBUGINFO_FILE_NAME "${CPACK_RPM_DEBUGINFO_FILE_NAME}")
list(APPEND filenames_ "${CPACK_RPM_DEBUGINFO_FILE_NAME}")
endif()
endif()
# check if other files have to be renamed
file(GLOB rename_files_ "${CPACK_RPM_DIRECTORY}/SPECS/*.rpm_name")
if(rename_files_)
foreach(f_ IN LISTS rename_files_)
file(READ "${f_}" tmp_)
list(GET tmp_ 0 efn_)
list(APPEND expected_filenames_ "${efn_}")
list(GET tmp_ 1 fn_)
list(APPEND filenames_ "${fn_}")
endforeach()
endif()
if(expected_filenames_)
foreach(F IN LISTS GENERATED_FILES)
unset(matched_)
foreach(expected_ IN LISTS expected_filenames_)
if(F MATCHES ".*/${expected_}")
list(FIND expected_filenames_ "${expected_}" idx_)
list(GET filenames_ ${idx_} filename_)
get_filename_component(FILE_PATH "${F}" DIRECTORY)
file(RENAME "${F}" "${FILE_PATH}/${filename_}")
list(APPEND new_files_list_ "${FILE_PATH}/${filename_}")
set(matched_ "YES")
break()
endif()
endforeach()
if(NOT matched_)
list(APPEND new_files_list_ "${F}")
endif()
endforeach()
set(GENERATED_FILES "${new_files_list_}")
endif()
endif()
set(GEN_CPACK_OUTPUT_FILES "${GENERATED_FILES}" PARENT_SCOPE)
if(CPACK_RPM_PACKAGE_DEBUG)
message("CPackRPM:Debug: GEN_CPACK_OUTPUT_FILES = ${GENERATED_FILES}")
endif()
endfunction()
cpack_rpm_generate_package()
