https://github.com/Kitware/CMake
Tip revision: f9116d0225f0c96a20b508510cffb621e116ac28 authored by Brad King on 28 June 2010, 14:23:40 UTC
CMake 2.8.2
CMake 2.8.2
Tip revision: f9116d0
cmCommandArgumentLexer.cxx
/*============================================================================
CMake - Cross Platform Makefile Generator
Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
Distributed under the OSI-approved BSD License (the "License");
see accompanying file Copyright.txt for details.
This software is distributed WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the License for more information.
============================================================================*/
#include "cmStandardIncludes.h"
#line 2 "cmCommandArgumentLexer.cxx"
#line 4 "cmCommandArgumentLexer.cxx"
#define YY_INT_ALIGNED short int
/* A lexical scanner generated by flex */
#define FLEX_SCANNER
#define YY_FLEX_MAJOR_VERSION 2
#define YY_FLEX_MINOR_VERSION 5
#define YY_FLEX_SUBMINOR_VERSION 35
#if YY_FLEX_SUBMINOR_VERSION > 0
#define FLEX_BETA
#endif
/* First, we deal with platform-specific or compiler-specific issues. */
/* begin standard C headers. */
#include <stdio.h>
#include <string.h>
#include <errno.h>
#include <stdlib.h>
/* end standard C headers. */
/* flex integer type definitions */
#ifndef FLEXINT_H
#define FLEXINT_H
/* C99 systems have <inttypes.h>. Non-C99 systems may or may not. */
#if defined (__STDC_VERSION__) && __STDC_VERSION__ >= 199901L
/* C99 says to define __STDC_LIMIT_MACROS before including stdint.h,
* if you want the limit (max/min) macros for int types.
*/
#ifndef __STDC_LIMIT_MACROS
#define __STDC_LIMIT_MACROS 1
#endif
#include <inttypes.h>
typedef int8_t flex_int8_t;
typedef uint8_t flex_uint8_t;
typedef int16_t flex_int16_t;
typedef uint16_t flex_uint16_t;
typedef int32_t flex_int32_t;
typedef uint32_t flex_uint32_t;
#else
typedef signed char flex_int8_t;
typedef short int flex_int16_t;
typedef int flex_int32_t;
typedef unsigned char flex_uint8_t;
typedef unsigned short int flex_uint16_t;
typedef unsigned int flex_uint32_t;
/* Limits of integral types. */
#ifndef INT8_MIN
#define INT8_MIN (-128)
#endif
#ifndef INT16_MIN
#define INT16_MIN (-32767-1)
#endif
#ifndef INT32_MIN
#define INT32_MIN (-2147483647-1)
#endif
#ifndef INT8_MAX
#define INT8_MAX (127)
#endif
#ifndef INT16_MAX
#define INT16_MAX (32767)
#endif
#ifndef INT32_MAX
#define INT32_MAX (2147483647)
#endif
#ifndef UINT8_MAX
#define UINT8_MAX (255U)
#endif
#ifndef UINT16_MAX
#define UINT16_MAX (65535U)
#endif
#ifndef UINT32_MAX
#define UINT32_MAX (4294967295U)
#endif
#endif /* ! C99 */
#endif /* ! FLEXINT_H */
#ifdef __cplusplus
/* The "const" storage-class-modifier is valid. */
#define YY_USE_CONST
#else /* ! __cplusplus */
/* C99 requires __STDC__ to be defined as 1. */
#if defined (__STDC__)
#define YY_USE_CONST
#endif /* defined (__STDC__) */
#endif /* ! __cplusplus */
#ifdef YY_USE_CONST
#define yyconst const
#else
#define yyconst
#endif
/* Returned upon end-of-file. */
#define YY_NULL 0
/* Promotes a possibly negative, possibly signed char to an unsigned
* integer for use as an array index. If the signed char is negative,
* we want to instead treat it as an 8-bit unsigned char, hence the
* double cast.
*/
#define YY_SC_TO_UI(c) ((unsigned int) (unsigned char) c)
/* An opaque pointer. */
#ifndef YY_TYPEDEF_YY_SCANNER_T
#define YY_TYPEDEF_YY_SCANNER_T
typedef void* yyscan_t;
#endif
/* For convenience, these vars (plus the bison vars far below)
are macros in the reentrant scanner. */
#define yyin yyg->yyin_r
#define yyout yyg->yyout_r
#define yyextra yyg->yyextra_r
#define yyleng yyg->yyleng_r
#define yytext yyg->yytext_r
#define yylineno (YY_CURRENT_BUFFER_LVALUE->yy_bs_lineno)
#define yycolumn (YY_CURRENT_BUFFER_LVALUE->yy_bs_column)
#define yy_flex_debug yyg->yy_flex_debug_r
/* Enter a start condition. This macro really ought to take a parameter,
* but we do it the disgusting crufty way forced on us by the ()-less
* definition of BEGIN.
*/
#define BEGIN yyg->yy_start = 1 + 2 *
/* Translate the current start state into a value that can be later handed
* to BEGIN to return to the state. The YYSTATE alias is for lex
* compatibility.
*/
#define YY_START ((yyg->yy_start - 1) / 2)
#define YYSTATE YY_START
/* Action number for EOF rule of a given start state. */
#define YY_STATE_EOF(state) (YY_END_OF_BUFFER + state + 1)
/* Special action meaning "start processing a new file". */
#define YY_NEW_FILE cmCommandArgument_yyrestart(yyin ,yyscanner )
#define YY_END_OF_BUFFER_CHAR 0
/* Size of default input buffer. */
#ifndef YY_BUF_SIZE
#define YY_BUF_SIZE 16384
#endif
/* The state buf must be large enough to hold one state per character in the main buffer.
*/
#define YY_STATE_BUF_SIZE ((YY_BUF_SIZE + 2) * sizeof(yy_state_type))
#ifndef YY_TYPEDEF_YY_BUFFER_STATE
#define YY_TYPEDEF_YY_BUFFER_STATE
typedef struct yy_buffer_state *YY_BUFFER_STATE;
#endif
#define EOB_ACT_CONTINUE_SCAN 0
#define EOB_ACT_END_OF_FILE 1
#define EOB_ACT_LAST_MATCH 2
#define YY_LESS_LINENO(n)
/* Return all but the first "n" matched characters back to the input stream. */
#define yyless(n) \
do \
{ \
/* Undo effects of setting up yytext. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
*yy_cp = yyg->yy_hold_char; \
YY_RESTORE_YY_MORE_OFFSET \
yyg->yy_c_buf_p = yy_cp = yy_bp + yyless_macro_arg - YY_MORE_ADJ; \
YY_DO_BEFORE_ACTION; /* set up yytext again */ \
} \
while ( 0 )
#define unput(c) yyunput( c, yyg->yytext_ptr , yyscanner )
#ifndef YY_TYPEDEF_YY_SIZE_T
#define YY_TYPEDEF_YY_SIZE_T
typedef size_t yy_size_t;
#endif
#ifndef YY_STRUCT_YY_BUFFER_STATE
#define YY_STRUCT_YY_BUFFER_STATE
struct yy_buffer_state
{
FILE *yy_input_file;
char *yy_ch_buf; /* input buffer */
char *yy_buf_pos; /* current position in input buffer */
/* Size of input buffer in bytes, not including room for EOB
* characters.
*/
yy_size_t yy_buf_size;
/* Number of characters read into yy_ch_buf, not including EOB
* characters.
*/
int yy_n_chars;
/* Whether we "own" the buffer - i.e., we know we created it,
* and can realloc() it to grow it, and should free() it to
* delete it.
*/
int yy_is_our_buffer;
/* Whether this is an "interactive" input source; if so, and
* if we're using stdio for input, then we want to use getc()
* instead of fread(), to make sure we stop fetching input after
* each newline.
*/
int yy_is_interactive;
/* Whether we're considered to be at the beginning of a line.
* If so, '^' rules will be active on the next match, otherwise
* not.
*/
int yy_at_bol;
int yy_bs_lineno; /**< The line count. */
int yy_bs_column; /**< The column count. */
/* Whether to try to fill the input buffer when we reach the
* end of it.
*/
int yy_fill_buffer;
int yy_buffer_status;
#define YY_BUFFER_NEW 0
#define YY_BUFFER_NORMAL 1
/* When an EOF's been seen but there's still some text to process
* then we mark the buffer as YY_EOF_PENDING, to indicate that we
* shouldn't try reading from the input source any more. We might
* still have a bunch of tokens to match, though, because of
* possible backing-up.
*
* When we actually see the EOF, we change the status to "new"
* (via cmCommandArgument_yyrestart()), so that the user can continue scanning by
* just pointing yyin at a new input file.
*/
#define YY_BUFFER_EOF_PENDING 2
};
#endif /* !YY_STRUCT_YY_BUFFER_STATE */
/* We provide macros for accessing buffer states in case in the
* future we want to put the buffer states in a more general
* "scanner state".
*
* Returns the top of the stack, or NULL.
*/
#define YY_CURRENT_BUFFER ( yyg->yy_buffer_stack \
? yyg->yy_buffer_stack[yyg->yy_buffer_stack_top] \
: NULL)
/* Same as previous macro, but useful when we know that the buffer stack is not
* NULL or when we need an lvalue. For internal use only.
*/
#define YY_CURRENT_BUFFER_LVALUE yyg->yy_buffer_stack[yyg->yy_buffer_stack_top]
void cmCommandArgument_yyrestart (FILE *input_file ,yyscan_t yyscanner );
void cmCommandArgument_yy_switch_to_buffer (YY_BUFFER_STATE new_buffer ,yyscan_t yyscanner );
YY_BUFFER_STATE cmCommandArgument_yy_create_buffer (FILE *file,int size ,yyscan_t yyscanner );
void cmCommandArgument_yy_delete_buffer (YY_BUFFER_STATE b ,yyscan_t yyscanner );
void cmCommandArgument_yy_flush_buffer (YY_BUFFER_STATE b ,yyscan_t yyscanner );
void cmCommandArgument_yypush_buffer_state (YY_BUFFER_STATE new_buffer ,yyscan_t yyscanner );
void cmCommandArgument_yypop_buffer_state (yyscan_t yyscanner );
static void cmCommandArgument_yyensure_buffer_stack (yyscan_t yyscanner );
static void cmCommandArgument_yy_load_buffer_state (yyscan_t yyscanner );
static void cmCommandArgument_yy_init_buffer (YY_BUFFER_STATE b,FILE *file ,yyscan_t yyscanner );
#define YY_FLUSH_BUFFER cmCommandArgument_yy_flush_buffer(YY_CURRENT_BUFFER ,yyscanner)
YY_BUFFER_STATE cmCommandArgument_yy_scan_buffer (char *base,yy_size_t size ,yyscan_t yyscanner );
YY_BUFFER_STATE cmCommandArgument_yy_scan_string (yyconst char *yy_str ,yyscan_t yyscanner );
YY_BUFFER_STATE cmCommandArgument_yy_scan_bytes (yyconst char *bytes,int len ,yyscan_t yyscanner );
void *cmCommandArgument_yyalloc (yy_size_t ,yyscan_t yyscanner );
void *cmCommandArgument_yyrealloc (void *,yy_size_t ,yyscan_t yyscanner );
void cmCommandArgument_yyfree (void * ,yyscan_t yyscanner );
#define yy_new_buffer cmCommandArgument_yy_create_buffer
#define yy_set_interactive(is_interactive) \
{ \
if ( ! YY_CURRENT_BUFFER ){ \
cmCommandArgument_yyensure_buffer_stack (yyscanner); \
YY_CURRENT_BUFFER_LVALUE = \
cmCommandArgument_yy_create_buffer(yyin,YY_BUF_SIZE ,yyscanner); \
} \
YY_CURRENT_BUFFER_LVALUE->yy_is_interactive = is_interactive; \
}
#define yy_set_bol(at_bol) \
{ \
if ( ! YY_CURRENT_BUFFER ){\
cmCommandArgument_yyensure_buffer_stack (yyscanner); \
YY_CURRENT_BUFFER_LVALUE = \
cmCommandArgument_yy_create_buffer(yyin,YY_BUF_SIZE ,yyscanner); \
} \
YY_CURRENT_BUFFER_LVALUE->yy_at_bol = at_bol; \
}
#define YY_AT_BOL() (YY_CURRENT_BUFFER_LVALUE->yy_at_bol)
/* Begin user sect3 */
#define cmCommandArgument_yywrap(n) 1
#define YY_SKIP_YYWRAP
typedef unsigned char YY_CHAR;
typedef int yy_state_type;
#define yytext_ptr yytext_r
static yy_state_type yy_get_previous_state (yyscan_t yyscanner );
static yy_state_type yy_try_NUL_trans (yy_state_type current_state ,yyscan_t yyscanner);
static int yy_get_next_buffer (yyscan_t yyscanner );
static void yy_fatal_error (yyconst char msg[] ,yyscan_t yyscanner );
/* Done after the current pattern has been matched and before the
* corresponding action - sets up yytext.
*/
#define YY_DO_BEFORE_ACTION \
yyg->yytext_ptr = yy_bp; \
yyleng = (size_t) (yy_cp - yy_bp); \
yyg->yy_hold_char = *yy_cp; \
*yy_cp = '\0'; \
yyg->yy_c_buf_p = yy_cp;
#define YY_NUM_RULES 14
#define YY_END_OF_BUFFER 15
/* This struct is not used in this scanner,
but its presence is necessary. */
struct yy_trans_info
{
flex_int32_t yy_verify;
flex_int32_t yy_nxt;
};
static yyconst flex_int16_t yy_accept[30] =
{ 0,
0, 0, 0, 0, 0, 0, 15, 9, 10, 7,
6, 14, 11, 5, 12, 13, 9, 0, 0, 4,
7, 0, 8, 2, 0, 3, 0, 1, 0
} ;
static yyconst flex_int32_t yy_ec[256] =
{ 0,
1, 1, 1, 1, 1, 1, 1, 1, 1, 2,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 3, 1, 1, 1, 1,
1, 1, 4, 1, 4, 4, 4, 4, 4, 4,
4, 4, 4, 4, 4, 4, 4, 1, 1, 1,
1, 1, 1, 5, 4, 4, 4, 4, 6, 4,
4, 4, 4, 4, 4, 4, 4, 7, 4, 4,
4, 4, 4, 4, 4, 8, 4, 4, 4, 4,
1, 9, 1, 1, 4, 1, 4, 4, 4, 4,
4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
4, 4, 4, 4, 4, 4, 4, 4, 4, 4,
4, 4, 10, 1, 11, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 1, 1, 1, 1
} ;
static yyconst flex_int32_t yy_meta[12] =
{ 0,
1, 2, 3, 4, 3, 4, 4, 4, 3, 5,
3
} ;
static yyconst flex_int16_t yy_base[35] =
{ 0,
0, 0, 31, 30, 29, 28, 36, 0, 6, 16,
0, 41, 41, 41, 0, 41, 0, 22, 22, 41,
18, 18, 41, 41, 7, 41, 4, 41, 41, 20,
21, 26, 9, 30
} ;
static yyconst flex_int16_t yy_def[35] =
{ 0,
29, 1, 1, 1, 1, 1, 29, 30, 31, 32,
33, 29, 29, 29, 34, 29, 30, 31, 18, 29,
32, 33, 29, 29, 18, 29, 18, 29, 0, 29,
29, 29, 29, 29
} ;
static yyconst flex_int16_t yy_nxt[53] =
{ 0,
8, 8, 9, 10, 11, 10, 10, 10, 12, 13,
14, 19, 22, 28, 27, 20, 17, 17, 17, 17,
17, 17, 26, 17, 18, 18, 21, 21, 25, 21,
23, 24, 23, 23, 23, 29, 16, 16, 15, 15,
7, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29
} ;
static yyconst flex_int16_t yy_chk[53] =
{ 0,
1, 1, 1, 1, 1, 1, 1, 1, 1, 1,
1, 9, 33, 27, 25, 9, 10, 10, 21, 21,
30, 30, 22, 30, 31, 31, 32, 32, 19, 32,
34, 18, 34, 34, 34, 7, 6, 5, 4, 3,
29, 29, 29, 29, 29, 29, 29, 29, 29, 29,
29, 29
} ;
/* The intent behind this definition is that it'll catch
* any uses of REJECT which flex missed.
*/
#define REJECT reject_used_but_not_detected
#define yymore() yymore_used_but_not_detected
#define YY_MORE_ADJ 0
#define YY_RESTORE_YY_MORE_OFFSET
#line 1 "cmCommandArgumentLexer.in.l"
#line 2 "cmCommandArgumentLexer.in.l"
/*============================================================================
CMake - Cross Platform Makefile Generator
Copyright 2000-2009 Kitware, Inc., Insight Software Consortium
Distributed under the OSI-approved BSD License (the "License");
see accompanying file Copyright.txt for details.
This software is distributed WITHOUT ANY WARRANTY; without even the
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
See the License for more information.
============================================================================*/
/*
This file must be translated to C and modified to build everywhere.
Run flex like this:
flex --prefix=cmCommandArgument_yy --header-file=cmCommandArgumentLexer.h -ocmCommandArgumentLexer.cxx cmCommandArgumentLexer.in.l
Modify cmCommandArgumentLexer.cxx:
- add #include "cmStandardIncludes.h" to top of file
- put header block at top of file
- remove TABs
- remove "yyscanner" argument from these methods:
yy_fatal_error, cmCommandArgument_yyalloc, cmCommandArgument_yyrealloc, cmCommandArgument_yyfree
- remove all YY_BREAK lines occurring right after return statements
- change while ( 1 ) to for(;;)
- add "return 0;" to end of cmCommandArgument_yylex
Modify cmCommandArgumentLexer.h:
- remove TABs
- remove the yy_init_globals function
- remove the block that includes unistd.h
- remove #line directives (avoids bogus warning on old Sun)
*/
#include "cmStandardLexer.h"
#include "cmCommandArgumentParserHelper.h"
/* Replace the lexer input function. */
#undef YY_INPUT
#define YY_INPUT(buf, result, max_size) \
{ result = yyextra->LexInput(buf, max_size); }
/* Include the set of tokens from the parser. */
#include "cmCommandArgumentParserTokens.h"
/*--------------------------------------------------------------------------*/
#line 508 "cmCommandArgumentLexer.cxx"
#define INITIAL 0
#define ESCAPES 1
#define NOESCAPES 2
#ifndef YY_NO_UNISTD_H
/* Special case for "unistd.h", since it is non-ANSI. We include it way
* down here because we want the user's section 1 to have been scanned first.
* The user has a chance to override it with an option.
*/
#include <unistd.h>
#endif
#ifndef YY_EXTRA_TYPE
#define YY_EXTRA_TYPE void *
#endif
/* Holds the entire state of the reentrant scanner. */
struct yyguts_t
{
/* User-defined. Not touched by flex. */
YY_EXTRA_TYPE yyextra_r;
/* The rest are the same as the globals declared in the non-reentrant scanner. */
FILE *yyin_r, *yyout_r;
size_t yy_buffer_stack_top; /**< index of top of stack. */
size_t yy_buffer_stack_max; /**< capacity of stack. */
YY_BUFFER_STATE * yy_buffer_stack; /**< Stack as an array. */
char yy_hold_char;
int yy_n_chars;
int yyleng_r;
char *yy_c_buf_p;
int yy_init;
int yy_start;
int yy_did_buffer_switch_on_eof;
int yy_start_stack_ptr;
int yy_start_stack_depth;
int *yy_start_stack;
yy_state_type yy_last_accepting_state;
char* yy_last_accepting_cpos;
int yylineno_r;
int yy_flex_debug_r;
char *yytext_r;
int yy_more_flag;
int yy_more_len;
}; /* end struct yyguts_t */
static int yy_init_globals (yyscan_t yyscanner );
int cmCommandArgument_yylex_init (yyscan_t* scanner);
int cmCommandArgument_yylex_init_extra (YY_EXTRA_TYPE user_defined,yyscan_t* scanner);
/* Accessor methods to globals.
These are made visible to non-reentrant scanners for convenience. */
int cmCommandArgument_yylex_destroy (yyscan_t yyscanner );
int cmCommandArgument_yyget_debug (yyscan_t yyscanner );
void cmCommandArgument_yyset_debug (int debug_flag ,yyscan_t yyscanner );
YY_EXTRA_TYPE cmCommandArgument_yyget_extra (yyscan_t yyscanner );
void cmCommandArgument_yyset_extra (YY_EXTRA_TYPE user_defined ,yyscan_t yyscanner );
FILE *cmCommandArgument_yyget_in (yyscan_t yyscanner );
void cmCommandArgument_yyset_in (FILE * in_str ,yyscan_t yyscanner );
FILE *cmCommandArgument_yyget_out (yyscan_t yyscanner );
void cmCommandArgument_yyset_out (FILE * out_str ,yyscan_t yyscanner );
int cmCommandArgument_yyget_leng (yyscan_t yyscanner );
char *cmCommandArgument_yyget_text (yyscan_t yyscanner );
int cmCommandArgument_yyget_lineno (yyscan_t yyscanner );
void cmCommandArgument_yyset_lineno (int line_number ,yyscan_t yyscanner );
/* Macros after this point can all be overridden by user definitions in
* section 1.
*/
#ifndef YY_SKIP_YYWRAP
#ifdef __cplusplus
extern "C" int cmCommandArgument_yywrap (yyscan_t yyscanner );
#else
extern int cmCommandArgument_yywrap (yyscan_t yyscanner );
#endif
#endif
#ifndef yytext_ptr
static void yy_flex_strncpy (char *,yyconst char *,int ,yyscan_t yyscanner);
#endif
#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * ,yyscan_t yyscanner);
#endif
#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput (yyscan_t yyscanner );
#else
static int input (yyscan_t yyscanner );
#endif
#endif
/* Amount of stuff to slurp up with each read. */
#ifndef YY_READ_BUF_SIZE
#define YY_READ_BUF_SIZE 8192
#endif
/* Copy whatever the last rule matched to the standard output. */
#ifndef ECHO
/* This used to be an fputs(), but since the string might contain NUL's,
* we now use fwrite().
*/
#define ECHO fwrite( yytext, yyleng, 1, yyout )
#endif
/* Gets input and stuffs it into "buf". number of characters read, or YY_NULL,
* is returned in "result".
*/
#ifndef YY_INPUT
#define YY_INPUT(buf,result,max_size) \
if ( YY_CURRENT_BUFFER_LVALUE->yy_is_interactive ) \
{ \
int c = '*'; \
size_t n; \
for ( n = 0; n < max_size && \
(c = getc( yyin )) != EOF && c != '\n'; ++n ) \
buf[n] = (char) c; \
if ( c == '\n' ) \
buf[n++] = (char) c; \
if ( c == EOF && ferror( yyin ) ) \
YY_FATAL_ERROR( "input in flex scanner failed" ); \
result = n; \
} \
else \
{ \
errno=0; \
while ( (result = fread(buf, 1, max_size, yyin))==0 && ferror(yyin)) \
{ \
if( errno != EINTR) \
{ \
YY_FATAL_ERROR( "input in flex scanner failed" ); \
break; \
} \
errno=0; \
clearerr(yyin); \
} \
}\
\
#endif
/* No semi-colon after return; correct usage is to write "yyterminate();" -
* we don't want an extra ';' after the "return" because that will cause
* some compilers to complain about unreachable statements.
*/
#ifndef yyterminate
#define yyterminate() return YY_NULL
#endif
/* Number of entries by which start-condition stack grows. */
#ifndef YY_START_STACK_INCR
#define YY_START_STACK_INCR 25
#endif
/* Report a fatal error. */
#ifndef YY_FATAL_ERROR
#define YY_FATAL_ERROR(msg) yy_fatal_error( msg , yyscanner)
#endif
/* end tables serialization structures and prototypes */
/* Default declaration of generated scanner - a define so the user can
* easily add parameters.
*/
#ifndef YY_DECL
#define YY_DECL_IS_OURS 1
extern int cmCommandArgument_yylex (yyscan_t yyscanner);
#define YY_DECL int cmCommandArgument_yylex (yyscan_t yyscanner)
#endif /* !YY_DECL */
/* Code executed at the beginning of each rule, after yytext and yyleng
* have been set up.
*/
#ifndef YY_USER_ACTION
#define YY_USER_ACTION
#endif
/* Code executed at the end of each rule. */
#ifndef YY_BREAK
#define YY_BREAK break;
#endif
#define YY_RULE_SETUP \
YY_USER_ACTION
/** The main scanner function which does all the work.
*/
YY_DECL
{
register yy_state_type yy_current_state;
register char *yy_cp, *yy_bp;
register int yy_act;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
#line 64 "cmCommandArgumentLexer.in.l"
#line 732 "cmCommandArgumentLexer.cxx"
if ( !yyg->yy_init )
{
yyg->yy_init = 1;
#ifdef YY_USER_INIT
YY_USER_INIT;
#endif
if ( ! yyg->yy_start )
yyg->yy_start = 1; /* first start state */
if ( ! yyin )
yyin = stdin;
if ( ! yyout )
yyout = stdout;
if ( ! YY_CURRENT_BUFFER ) {
cmCommandArgument_yyensure_buffer_stack (yyscanner);
YY_CURRENT_BUFFER_LVALUE =
cmCommandArgument_yy_create_buffer(yyin,YY_BUF_SIZE ,yyscanner);
}
cmCommandArgument_yy_load_buffer_state(yyscanner );
}
for(;;) /* loops until end-of-file is reached */
{
yy_cp = yyg->yy_c_buf_p;
/* Support of yytext. */
*yy_cp = yyg->yy_hold_char;
/* yy_bp points to the position in yy_ch_buf of the start of
* the current run.
*/
yy_bp = yy_cp;
yy_current_state = yyg->yy_start;
yy_match:
do
{
register YY_CHAR yy_c = yy_ec[YY_SC_TO_UI(*yy_cp)];
if ( yy_accept[yy_current_state] )
{
yyg->yy_last_accepting_state = yy_current_state;
yyg->yy_last_accepting_cpos = yy_cp;
}
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
if ( yy_current_state >= 30 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
++yy_cp;
}
while ( yy_base[yy_current_state] != 41 );
yy_find_action:
yy_act = yy_accept[yy_current_state];
if ( yy_act == 0 )
{ /* have to back up */
yy_cp = yyg->yy_last_accepting_cpos;
yy_current_state = yyg->yy_last_accepting_state;
yy_act = yy_accept[yy_current_state];
}
YY_DO_BEFORE_ACTION;
do_action: /* This label is used only to access EOF actions. */
switch ( yy_act )
{ /* beginning of action switch */
case 0: /* must back up */
/* undo the effects of YY_DO_BEFORE_ACTION */
*yy_cp = yyg->yy_hold_char;
yy_cp = yyg->yy_last_accepting_cpos;
yy_current_state = yyg->yy_last_accepting_state;
goto yy_find_action;
case 1:
YY_RULE_SETUP
#line 66 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
yyextra->AllocateParserType(yylvalp, yytext+1, strlen(yytext)-2);
return cal_ENVCURLY;
}
case 2:
YY_RULE_SETUP
#line 72 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
yyextra->AllocateParserType(yylvalp, yytext+1, strlen(yytext)-2);
return cal_NCURLY;
}
case 3:
YY_RULE_SETUP
#line 78 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
yyextra->AllocateParserType(yylvalp, yytext+1, strlen(yytext)-2);
return cal_ATNAME;
}
case 4:
YY_RULE_SETUP
#line 84 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
//yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
yylvalp->str = yyextra->DCURLYVariable;
return cal_DCURLY;
}
case 5:
YY_RULE_SETUP
#line 91 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
//yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
yylvalp->str = yyextra->RCURLYVariable;
return cal_RCURLY;
}
case 6:
YY_RULE_SETUP
#line 98 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
//yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
yylvalp->str = yyextra->ATVariable;
return cal_AT;
}
case 7:
YY_RULE_SETUP
#line 105 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
return cal_NAME;
}
case 8:
YY_RULE_SETUP
#line 111 "cmCommandArgumentLexer.in.l"
{
if ( !yyextra->HandleEscapeSymbol(yylvalp, *(yytext+1)) )
{
return cal_ERROR;
}
return cal_SYMBOL;
}
case 9:
/* rule 9 can match eol */
YY_RULE_SETUP
#line 119 "cmCommandArgumentLexer.in.l"
{
//std::cerr << __LINE__ << " here: [" << yytext << "]" << std::endl;
yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
return cal_SYMBOL;
}
case 10:
YY_RULE_SETUP
#line 125 "cmCommandArgumentLexer.in.l"
{
//yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
yylvalp->str = yyextra->DOLLARVariable;
return cal_DOLLAR;
}
case 11:
YY_RULE_SETUP
#line 131 "cmCommandArgumentLexer.in.l"
{
//yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
yylvalp->str = yyextra->LCURLYVariable;
return cal_LCURLY;
}
case 12:
YY_RULE_SETUP
#line 137 "cmCommandArgumentLexer.in.l"
{
//yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
yylvalp->str = yyextra->BSLASHVariable;
return cal_BSLASH;
}
case 13:
YY_RULE_SETUP
#line 143 "cmCommandArgumentLexer.in.l"
{
//yyextra->AllocateParserType(yylvalp, yytext, strlen(yytext));
yylvalp->str = yyextra->BSLASHVariable;
return cal_SYMBOL;
}
case 14:
YY_RULE_SETUP
#line 149 "cmCommandArgumentLexer.in.l"
ECHO;
YY_BREAK
#line 943 "cmCommandArgumentLexer.cxx"
case YY_STATE_EOF(INITIAL):
case YY_STATE_EOF(ESCAPES):
case YY_STATE_EOF(NOESCAPES):
yyterminate();
case YY_END_OF_BUFFER:
{
/* Amount of text matched not including the EOB char. */
int yy_amount_of_matched_text = (int) (yy_cp - yyg->yytext_ptr) - 1;
/* Undo the effects of YY_DO_BEFORE_ACTION. */
*yy_cp = yyg->yy_hold_char;
YY_RESTORE_YY_MORE_OFFSET
if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_NEW )
{
/* We're scanning a new file or input source. It's
* possible that this happened because the user
* just pointed yyin at a new source and called
* cmCommandArgument_yylex(). If so, then we have to assure
* consistency between YY_CURRENT_BUFFER and our
* globals. Here is the right place to do so, because
* this is the first action (other than possibly a
* back-up) that will match for the new input source.
*/
yyg->yy_n_chars = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
YY_CURRENT_BUFFER_LVALUE->yy_input_file = yyin;
YY_CURRENT_BUFFER_LVALUE->yy_buffer_status = YY_BUFFER_NORMAL;
}
/* Note that here we test for yy_c_buf_p "<=" to the position
* of the first EOB in the buffer, since yy_c_buf_p will
* already have been incremented past the NUL character
* (since all states make transitions on EOB to the
* end-of-buffer state). Contrast this with the test
* in input().
*/
if ( yyg->yy_c_buf_p <= &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[yyg->yy_n_chars] )
{ /* This was really a NUL. */
yy_state_type yy_next_state;
yyg->yy_c_buf_p = yyg->yytext_ptr + yy_amount_of_matched_text;
yy_current_state = yy_get_previous_state( yyscanner );
/* Okay, we're now positioned to make the NUL
* transition. We couldn't have
* yy_get_previous_state() go ahead and do it
* for us because it doesn't know how to deal
* with the possibility of jamming (and we don't
* want to build jamming into it because then it
* will run more slowly).
*/
yy_next_state = yy_try_NUL_trans( yy_current_state , yyscanner);
yy_bp = yyg->yytext_ptr + YY_MORE_ADJ;
if ( yy_next_state )
{
/* Consume the NUL. */
yy_cp = ++yyg->yy_c_buf_p;
yy_current_state = yy_next_state;
goto yy_match;
}
else
{
yy_cp = yyg->yy_c_buf_p;
goto yy_find_action;
}
}
else switch ( yy_get_next_buffer( yyscanner ) )
{
case EOB_ACT_END_OF_FILE:
{
yyg->yy_did_buffer_switch_on_eof = 0;
if ( cmCommandArgument_yywrap(yyscanner ) )
{
/* Note: because we've taken care in
* yy_get_next_buffer() to have set up
* yytext, we can now set up
* yy_c_buf_p so that if some total
* hoser (like flex itself) wants to
* call the scanner after we return the
* YY_NULL, it'll still work - another
* YY_NULL will get returned.
*/
yyg->yy_c_buf_p = yyg->yytext_ptr + YY_MORE_ADJ;
yy_act = YY_STATE_EOF(YY_START);
goto do_action;
}
else
{
if ( ! yyg->yy_did_buffer_switch_on_eof )
YY_NEW_FILE;
}
break;
}
case EOB_ACT_CONTINUE_SCAN:
yyg->yy_c_buf_p =
yyg->yytext_ptr + yy_amount_of_matched_text;
yy_current_state = yy_get_previous_state( yyscanner );
yy_cp = yyg->yy_c_buf_p;
yy_bp = yyg->yytext_ptr + YY_MORE_ADJ;
goto yy_match;
case EOB_ACT_LAST_MATCH:
yyg->yy_c_buf_p =
&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[yyg->yy_n_chars];
yy_current_state = yy_get_previous_state( yyscanner );
yy_cp = yyg->yy_c_buf_p;
yy_bp = yyg->yytext_ptr + YY_MORE_ADJ;
goto yy_find_action;
}
break;
}
default:
YY_FATAL_ERROR(
"fatal flex scanner internal error--no action found" );
} /* end of action switch */
} /* end of scanning one token */
return 0; /* this should not happend but it should silence a warning */
} /* end of cmCommandArgument_yylex */
/* yy_get_next_buffer - try to read in a new buffer
*
* Returns a code representing an action:
* EOB_ACT_LAST_MATCH -
* EOB_ACT_CONTINUE_SCAN - continue scanning from current position
* EOB_ACT_END_OF_FILE - end of file
*/
static int yy_get_next_buffer (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
register char *dest = YY_CURRENT_BUFFER_LVALUE->yy_ch_buf;
register char *source = yyg->yytext_ptr;
register int number_to_move, i;
int ret_val;
if ( yyg->yy_c_buf_p > &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[yyg->yy_n_chars + 1] )
YY_FATAL_ERROR(
"fatal flex scanner internal error--end of buffer missed" );
if ( YY_CURRENT_BUFFER_LVALUE->yy_fill_buffer == 0 )
{ /* Don't try to fill the buffer, so this is an EOF. */
if ( yyg->yy_c_buf_p - yyg->yytext_ptr - YY_MORE_ADJ == 1 )
{
/* We matched a single character, the EOB, so
* treat this as a final EOF.
*/
return EOB_ACT_END_OF_FILE;
}
else
{
/* We matched some text prior to the EOB, first
* process it.
*/
return EOB_ACT_LAST_MATCH;
}
}
/* Try to read more data. */
/* First move last chars to start of buffer. */
number_to_move = (int) (yyg->yy_c_buf_p - yyg->yytext_ptr) - 1;
for ( i = 0; i < number_to_move; ++i )
*(dest++) = *(source++);
if ( YY_CURRENT_BUFFER_LVALUE->yy_buffer_status == YY_BUFFER_EOF_PENDING )
/* don't do the read, it's not guaranteed to return an EOF,
* just force an EOF
*/
YY_CURRENT_BUFFER_LVALUE->yy_n_chars = yyg->yy_n_chars = 0;
else
{
int num_to_read =
YY_CURRENT_BUFFER_LVALUE->yy_buf_size - number_to_move - 1;
while ( num_to_read <= 0 )
{ /* Not enough room in the buffer - grow it. */
/* just a shorter name for the current buffer */
YY_BUFFER_STATE b = YY_CURRENT_BUFFER;
int yy_c_buf_p_offset =
(int) (yyg->yy_c_buf_p - b->yy_ch_buf);
if ( b->yy_is_our_buffer )
{
int new_size = b->yy_buf_size * 2;
if ( new_size <= 0 )
b->yy_buf_size += b->yy_buf_size / 8;
else
b->yy_buf_size *= 2;
b->yy_ch_buf = (char *)
/* Include room in for 2 EOB chars. */
cmCommandArgument_yyrealloc((void *) b->yy_ch_buf,b->yy_buf_size + 2 ,yyscanner );
}
else
/* Can't grow it, we don't own it. */
b->yy_ch_buf = 0;
if ( ! b->yy_ch_buf )
YY_FATAL_ERROR(
"fatal error - scanner input buffer overflow" );
yyg->yy_c_buf_p = &b->yy_ch_buf[yy_c_buf_p_offset];
num_to_read = YY_CURRENT_BUFFER_LVALUE->yy_buf_size -
number_to_move - 1;
}
if ( num_to_read > YY_READ_BUF_SIZE )
num_to_read = YY_READ_BUF_SIZE;
/* Read in more data. */
YY_INPUT( (&YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[number_to_move]),
yyg->yy_n_chars, (size_t) num_to_read );
YY_CURRENT_BUFFER_LVALUE->yy_n_chars = yyg->yy_n_chars;
}
if ( yyg->yy_n_chars == 0 )
{
if ( number_to_move == YY_MORE_ADJ )
{
ret_val = EOB_ACT_END_OF_FILE;
cmCommandArgument_yyrestart(yyin ,yyscanner);
}
else
{
ret_val = EOB_ACT_LAST_MATCH;
YY_CURRENT_BUFFER_LVALUE->yy_buffer_status =
YY_BUFFER_EOF_PENDING;
}
}
else
ret_val = EOB_ACT_CONTINUE_SCAN;
if ((yy_size_t) (yyg->yy_n_chars + number_to_move) > YY_CURRENT_BUFFER_LVALUE->yy_buf_size) {
/* Extend the array by 50%, plus the number we really need. */
yy_size_t new_size = yyg->yy_n_chars + number_to_move + (yyg->yy_n_chars >> 1);
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf = (char *) cmCommandArgument_yyrealloc((void *) YY_CURRENT_BUFFER_LVALUE->yy_ch_buf,new_size ,yyscanner );
if ( ! YY_CURRENT_BUFFER_LVALUE->yy_ch_buf )
YY_FATAL_ERROR( "out of dynamic memory in yy_get_next_buffer()" );
}
yyg->yy_n_chars += number_to_move;
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[yyg->yy_n_chars] = YY_END_OF_BUFFER_CHAR;
YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[yyg->yy_n_chars + 1] = YY_END_OF_BUFFER_CHAR;
yyg->yytext_ptr = &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[0];
return ret_val;
}
/* yy_get_previous_state - get the state just before the EOB char was reached */
static yy_state_type yy_get_previous_state (yyscan_t yyscanner)
{
register yy_state_type yy_current_state;
register char *yy_cp;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
yy_current_state = yyg->yy_start;
for ( yy_cp = yyg->yytext_ptr + YY_MORE_ADJ; yy_cp < yyg->yy_c_buf_p; ++yy_cp )
{
register YY_CHAR yy_c = (*yy_cp ? yy_ec[YY_SC_TO_UI(*yy_cp)] : 1);
if ( yy_accept[yy_current_state] )
{
yyg->yy_last_accepting_state = yy_current_state;
yyg->yy_last_accepting_cpos = yy_cp;
}
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
if ( yy_current_state >= 30 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
}
return yy_current_state;
}
/* yy_try_NUL_trans - try to make a transition on the NUL character
*
* synopsis
* next_state = yy_try_NUL_trans( current_state );
*/
static yy_state_type yy_try_NUL_trans (yy_state_type yy_current_state , yyscan_t yyscanner)
{
register int yy_is_jam;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner; /* This var may be unused depending upon options. */
register char *yy_cp = yyg->yy_c_buf_p;
register YY_CHAR yy_c = 1;
if ( yy_accept[yy_current_state] )
{
yyg->yy_last_accepting_state = yy_current_state;
yyg->yy_last_accepting_cpos = yy_cp;
}
while ( yy_chk[yy_base[yy_current_state] + yy_c] != yy_current_state )
{
yy_current_state = (int) yy_def[yy_current_state];
if ( yy_current_state >= 30 )
yy_c = yy_meta[(unsigned int) yy_c];
}
yy_current_state = yy_nxt[yy_base[yy_current_state] + (unsigned int) yy_c];
yy_is_jam = (yy_current_state == 29);
return yy_is_jam ? 0 : yy_current_state;
}
#ifndef YY_NO_INPUT
#ifdef __cplusplus
static int yyinput (yyscan_t yyscanner)
#else
static int input (yyscan_t yyscanner)
#endif
{
int c;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
*yyg->yy_c_buf_p = yyg->yy_hold_char;
if ( *yyg->yy_c_buf_p == YY_END_OF_BUFFER_CHAR )
{
/* yy_c_buf_p now points to the character we want to return.
* If this occurs *before* the EOB characters, then it's a
* valid NUL; if not, then we've hit the end of the buffer.
*/
if ( yyg->yy_c_buf_p < &YY_CURRENT_BUFFER_LVALUE->yy_ch_buf[yyg->yy_n_chars] )
/* This was really a NUL. */
*yyg->yy_c_buf_p = '\0';
else
{ /* need more input */
int offset = yyg->yy_c_buf_p - yyg->yytext_ptr;
++yyg->yy_c_buf_p;
switch ( yy_get_next_buffer( yyscanner ) )
{
case EOB_ACT_LAST_MATCH:
/* This happens because yy_g_n_b()
* sees that we've accumulated a
* token and flags that we need to
* try matching the token before
* proceeding. But for input(),
* there's no matching to consider.
* So convert the EOB_ACT_LAST_MATCH
* to EOB_ACT_END_OF_FILE.
*/
/* Reset buffer status. */
cmCommandArgument_yyrestart(yyin ,yyscanner);
/*FALLTHROUGH*/
case EOB_ACT_END_OF_FILE:
{
if ( cmCommandArgument_yywrap(yyscanner ) )
return EOF;
if ( ! yyg->yy_did_buffer_switch_on_eof )
YY_NEW_FILE;
#ifdef __cplusplus
return yyinput(yyscanner);
#else
return input(yyscanner);
#endif
}
case EOB_ACT_CONTINUE_SCAN:
yyg->yy_c_buf_p = yyg->yytext_ptr + offset;
break;
}
}
}
c = *(unsigned char *) yyg->yy_c_buf_p; /* cast for 8-bit char's */
*yyg->yy_c_buf_p = '\0'; /* preserve yytext */
yyg->yy_hold_char = *++yyg->yy_c_buf_p;
return c;
}
#endif /* ifndef YY_NO_INPUT */
/** Immediately switch to a different input stream.
* @param input_file A readable stream.
* @param yyscanner The scanner object.
* @note This function does not reset the start condition to @c INITIAL .
*/
void cmCommandArgument_yyrestart (FILE * input_file , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if ( ! YY_CURRENT_BUFFER ){
cmCommandArgument_yyensure_buffer_stack (yyscanner);
YY_CURRENT_BUFFER_LVALUE =
cmCommandArgument_yy_create_buffer(yyin,YY_BUF_SIZE ,yyscanner);
}
cmCommandArgument_yy_init_buffer(YY_CURRENT_BUFFER,input_file ,yyscanner);
cmCommandArgument_yy_load_buffer_state(yyscanner );
}
/** Switch to a different input buffer.
* @param new_buffer The new input buffer.
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yy_switch_to_buffer (YY_BUFFER_STATE new_buffer , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
/* TODO. We should be able to replace this entire function body
* with
* cmCommandArgument_yypop_buffer_state();
* cmCommandArgument_yypush_buffer_state(new_buffer);
*/
cmCommandArgument_yyensure_buffer_stack (yyscanner);
if ( YY_CURRENT_BUFFER == new_buffer )
return;
if ( YY_CURRENT_BUFFER )
{
/* Flush out information for old buffer. */
*yyg->yy_c_buf_p = yyg->yy_hold_char;
YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = yyg->yy_c_buf_p;
YY_CURRENT_BUFFER_LVALUE->yy_n_chars = yyg->yy_n_chars;
}
YY_CURRENT_BUFFER_LVALUE = new_buffer;
cmCommandArgument_yy_load_buffer_state(yyscanner );
/* We don't actually know whether we did this switch during
* EOF (cmCommandArgument_yywrap()) processing, but the only time this flag
* is looked at is after cmCommandArgument_yywrap() is called, so it's safe
* to go ahead and always set it.
*/
yyg->yy_did_buffer_switch_on_eof = 1;
}
static void cmCommandArgument_yy_load_buffer_state (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
yyg->yy_n_chars = YY_CURRENT_BUFFER_LVALUE->yy_n_chars;
yyg->yytext_ptr = yyg->yy_c_buf_p = YY_CURRENT_BUFFER_LVALUE->yy_buf_pos;
yyin = YY_CURRENT_BUFFER_LVALUE->yy_input_file;
yyg->yy_hold_char = *yyg->yy_c_buf_p;
}
/** Allocate and initialize an input buffer state.
* @param file A readable stream.
* @param size The character buffer size in bytes. When in doubt, use @c YY_BUF_SIZE.
* @param yyscanner The scanner object.
* @return the allocated buffer state.
*/
YY_BUFFER_STATE cmCommandArgument_yy_create_buffer (FILE * file, int size , yyscan_t yyscanner)
{
YY_BUFFER_STATE b;
b = (YY_BUFFER_STATE) cmCommandArgument_yyalloc(sizeof( struct yy_buffer_state ) ,yyscanner );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in cmCommandArgument_yy_create_buffer()" );
b->yy_buf_size = size;
/* yy_ch_buf has to be 2 characters longer than the size given because
* we need to put in 2 end-of-buffer characters.
*/
b->yy_ch_buf = (char *) cmCommandArgument_yyalloc(b->yy_buf_size + 2 ,yyscanner );
if ( ! b->yy_ch_buf )
YY_FATAL_ERROR( "out of dynamic memory in cmCommandArgument_yy_create_buffer()" );
b->yy_is_our_buffer = 1;
cmCommandArgument_yy_init_buffer(b,file ,yyscanner);
return b;
}
/** Destroy the buffer.
* @param b a buffer created with cmCommandArgument_yy_create_buffer()
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yy_delete_buffer (YY_BUFFER_STATE b , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if ( ! b )
return;
if ( b == YY_CURRENT_BUFFER ) /* Not sure if we should pop here. */
YY_CURRENT_BUFFER_LVALUE = (YY_BUFFER_STATE) 0;
if ( b->yy_is_our_buffer )
cmCommandArgument_yyfree((void *) b->yy_ch_buf ,yyscanner );
cmCommandArgument_yyfree((void *) b ,yyscanner );
}
#ifndef __cplusplus
extern int isatty (int );
#endif /* __cplusplus */
/* Initializes or reinitializes a buffer.
* This function is sometimes called more than once on the same buffer,
* such as during a cmCommandArgument_yyrestart() or at EOF.
*/
static void cmCommandArgument_yy_init_buffer (YY_BUFFER_STATE b, FILE * file , yyscan_t yyscanner)
{
int oerrno = errno;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
cmCommandArgument_yy_flush_buffer(b ,yyscanner);
b->yy_input_file = file;
b->yy_fill_buffer = 1;
/* If b is the current buffer, then cmCommandArgument_yy_init_buffer was _probably_
* called from cmCommandArgument_yyrestart() or through yy_get_next_buffer.
* In that case, we don't want to reset the lineno or column.
*/
if (b != YY_CURRENT_BUFFER){
b->yy_bs_lineno = 1;
b->yy_bs_column = 0;
}
b->yy_is_interactive = file ? (isatty( fileno(file) ) > 0) : 0;
errno = oerrno;
}
/** Discard all buffered characters. On the next scan, YY_INPUT will be called.
* @param b the buffer state to be flushed, usually @c YY_CURRENT_BUFFER.
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yy_flush_buffer (YY_BUFFER_STATE b , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if ( ! b )
return;
b->yy_n_chars = 0;
/* We always need two end-of-buffer characters. The first causes
* a transition to the end-of-buffer state. The second causes
* a jam in that state.
*/
b->yy_ch_buf[0] = YY_END_OF_BUFFER_CHAR;
b->yy_ch_buf[1] = YY_END_OF_BUFFER_CHAR;
b->yy_buf_pos = &b->yy_ch_buf[0];
b->yy_at_bol = 1;
b->yy_buffer_status = YY_BUFFER_NEW;
if ( b == YY_CURRENT_BUFFER )
cmCommandArgument_yy_load_buffer_state(yyscanner );
}
/** Pushes the new state onto the stack. The new state becomes
* the current state. This function will allocate the stack
* if necessary.
* @param new_buffer The new state.
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yypush_buffer_state (YY_BUFFER_STATE new_buffer , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if (new_buffer == NULL)
return;
cmCommandArgument_yyensure_buffer_stack(yyscanner);
/* This block is copied from cmCommandArgument_yy_switch_to_buffer. */
if ( YY_CURRENT_BUFFER )
{
/* Flush out information for old buffer. */
*yyg->yy_c_buf_p = yyg->yy_hold_char;
YY_CURRENT_BUFFER_LVALUE->yy_buf_pos = yyg->yy_c_buf_p;
YY_CURRENT_BUFFER_LVALUE->yy_n_chars = yyg->yy_n_chars;
}
/* Only push if top exists. Otherwise, replace top. */
if (YY_CURRENT_BUFFER)
yyg->yy_buffer_stack_top++;
YY_CURRENT_BUFFER_LVALUE = new_buffer;
/* copied from cmCommandArgument_yy_switch_to_buffer. */
cmCommandArgument_yy_load_buffer_state(yyscanner );
yyg->yy_did_buffer_switch_on_eof = 1;
}
/** Removes and deletes the top of the stack, if present.
* The next element becomes the new top.
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yypop_buffer_state (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if (!YY_CURRENT_BUFFER)
return;
cmCommandArgument_yy_delete_buffer(YY_CURRENT_BUFFER ,yyscanner);
YY_CURRENT_BUFFER_LVALUE = NULL;
if (yyg->yy_buffer_stack_top > 0)
--yyg->yy_buffer_stack_top;
if (YY_CURRENT_BUFFER) {
cmCommandArgument_yy_load_buffer_state(yyscanner );
yyg->yy_did_buffer_switch_on_eof = 1;
}
}
/* Allocates the stack if it does not exist.
* Guarantees space for at least one push.
*/
static void cmCommandArgument_yyensure_buffer_stack (yyscan_t yyscanner)
{
int num_to_alloc;
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if (!yyg->yy_buffer_stack) {
/* First allocation is just for 2 elements, since we don't know if this
* scanner will even need a stack. We use 2 instead of 1 to avoid an
* immediate realloc on the next call.
*/
num_to_alloc = 1;
yyg->yy_buffer_stack = (struct yy_buffer_state**)cmCommandArgument_yyalloc
(num_to_alloc * sizeof(struct yy_buffer_state*)
, yyscanner);
if ( ! yyg->yy_buffer_stack )
YY_FATAL_ERROR( "out of dynamic memory in cmCommandArgument_yyensure_buffer_stack()" );
memset(yyg->yy_buffer_stack, 0, num_to_alloc * sizeof(struct yy_buffer_state*));
yyg->yy_buffer_stack_max = num_to_alloc;
yyg->yy_buffer_stack_top = 0;
return;
}
if (yyg->yy_buffer_stack_top >= (yyg->yy_buffer_stack_max) - 1){
/* Increase the buffer to prepare for a possible push. */
int grow_size = 8 /* arbitrary grow size */;
num_to_alloc = yyg->yy_buffer_stack_max + grow_size;
yyg->yy_buffer_stack = (struct yy_buffer_state**)cmCommandArgument_yyrealloc
(yyg->yy_buffer_stack,
num_to_alloc * sizeof(struct yy_buffer_state*)
, yyscanner);
if ( ! yyg->yy_buffer_stack )
YY_FATAL_ERROR( "out of dynamic memory in cmCommandArgument_yyensure_buffer_stack()" );
/* zero only the new slots.*/
memset(yyg->yy_buffer_stack + yyg->yy_buffer_stack_max, 0, grow_size * sizeof(struct yy_buffer_state*));
yyg->yy_buffer_stack_max = num_to_alloc;
}
}
/** Setup the input buffer state to scan directly from a user-specified character buffer.
* @param base the character buffer
* @param size the size in bytes of the character buffer
* @param yyscanner The scanner object.
* @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE cmCommandArgument_yy_scan_buffer (char * base, yy_size_t size , yyscan_t yyscanner)
{
YY_BUFFER_STATE b;
if ( size < 2 ||
base[size-2] != YY_END_OF_BUFFER_CHAR ||
base[size-1] != YY_END_OF_BUFFER_CHAR )
/* They forgot to leave room for the EOB's. */
return 0;
b = (YY_BUFFER_STATE) cmCommandArgument_yyalloc(sizeof( struct yy_buffer_state ) ,yyscanner );
if ( ! b )
YY_FATAL_ERROR( "out of dynamic memory in cmCommandArgument_yy_scan_buffer()" );
b->yy_buf_size = size - 2; /* "- 2" to take care of EOB's */
b->yy_buf_pos = b->yy_ch_buf = base;
b->yy_is_our_buffer = 0;
b->yy_input_file = 0;
b->yy_n_chars = b->yy_buf_size;
b->yy_is_interactive = 0;
b->yy_at_bol = 1;
b->yy_fill_buffer = 0;
b->yy_buffer_status = YY_BUFFER_NEW;
cmCommandArgument_yy_switch_to_buffer(b ,yyscanner );
return b;
}
/** Setup the input buffer state to scan a string. The next call to cmCommandArgument_yylex() will
* scan from a @e copy of @a str.
* @param yystr a NUL-terminated string to scan
* @param yyscanner The scanner object.
* @return the newly allocated buffer state object.
* @note If you want to scan bytes that may contain NUL values, then use
* cmCommandArgument_yy_scan_bytes() instead.
*/
YY_BUFFER_STATE cmCommandArgument_yy_scan_string (yyconst char * yystr , yyscan_t yyscanner)
{
return cmCommandArgument_yy_scan_bytes(yystr,strlen(yystr) ,yyscanner);
}
/** Setup the input buffer state to scan the given bytes. The next call to cmCommandArgument_yylex() will
* scan from a @e copy of @a bytes.
* @param bytes the byte buffer to scan
* @param len the number of bytes in the buffer pointed to by @a bytes.
* @param yyscanner The scanner object.
* @return the newly allocated buffer state object.
*/
YY_BUFFER_STATE cmCommandArgument_yy_scan_bytes (yyconst char * yybytes, int _yybytes_len , yyscan_t yyscanner)
{
YY_BUFFER_STATE b;
char *buf;
yy_size_t n;
int i;
/* Get memory for full buffer, including space for trailing EOB's. */
n = _yybytes_len + 2;
buf = (char *) cmCommandArgument_yyalloc(n ,yyscanner );
if ( ! buf )
YY_FATAL_ERROR( "out of dynamic memory in cmCommandArgument_yy_scan_bytes()" );
for ( i = 0; i < _yybytes_len; ++i )
buf[i] = yybytes[i];
buf[_yybytes_len] = buf[_yybytes_len+1] = YY_END_OF_BUFFER_CHAR;
b = cmCommandArgument_yy_scan_buffer(buf,n ,yyscanner);
if ( ! b )
YY_FATAL_ERROR( "bad buffer in cmCommandArgument_yy_scan_bytes()" );
/* It's okay to grow etc. this buffer, and we should throw it
* away when we're done.
*/
b->yy_is_our_buffer = 1;
return b;
}
#ifndef YY_EXIT_FAILURE
#define YY_EXIT_FAILURE 2
#endif
static void yy_fatal_error (yyconst char* msg , yyscan_t)
{
(void) fprintf( stderr, "%s\n", msg );
exit( YY_EXIT_FAILURE );
}
/* Redefine yyless() so it works in section 3 code. */
#undef yyless
#define yyless(n) \
do \
{ \
/* Undo effects of setting up yytext. */ \
int yyless_macro_arg = (n); \
YY_LESS_LINENO(yyless_macro_arg);\
yytext[yyleng] = yyg->yy_hold_char; \
yyg->yy_c_buf_p = yytext + yyless_macro_arg; \
yyg->yy_hold_char = *yyg->yy_c_buf_p; \
*yyg->yy_c_buf_p = '\0'; \
yyleng = yyless_macro_arg; \
} \
while ( 0 )
/* Accessor methods (get/set functions) to struct members. */
/** Get the user-defined data for this scanner.
* @param yyscanner The scanner object.
*/
YY_EXTRA_TYPE cmCommandArgument_yyget_extra (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
return yyextra;
}
/** Get the current line number.
* @param yyscanner The scanner object.
*/
int cmCommandArgument_yyget_lineno (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if (! YY_CURRENT_BUFFER)
return 0;
return yylineno;
}
/** Get the current column number.
* @param yyscanner The scanner object.
*/
int cmCommandArgument_yyget_column (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if (! YY_CURRENT_BUFFER)
return 0;
return yycolumn;
}
/** Get the input stream.
* @param yyscanner The scanner object.
*/
FILE *cmCommandArgument_yyget_in (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
return yyin;
}
/** Get the output stream.
* @param yyscanner The scanner object.
*/
FILE *cmCommandArgument_yyget_out (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
return yyout;
}
/** Get the length of the current token.
* @param yyscanner The scanner object.
*/
int cmCommandArgument_yyget_leng (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
return yyleng;
}
/** Get the current token.
* @param yyscanner The scanner object.
*/
char *cmCommandArgument_yyget_text (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
return yytext;
}
/** Set the user-defined data. This data is never touched by the scanner.
* @param user_defined The data to be associated with this scanner.
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yyset_extra (YY_EXTRA_TYPE user_defined , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
yyextra = user_defined ;
}
/** Set the current line number.
* @param line_number
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yyset_lineno (int line_number , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
/* lineno is only valid if an input buffer exists. */
if (! YY_CURRENT_BUFFER )
yy_fatal_error( "cmCommandArgument_yyset_lineno called with no buffer" , yyscanner);
yylineno = line_number;
}
/** Set the current column.
* @param line_number
* @param yyscanner The scanner object.
*/
void cmCommandArgument_yyset_column (int column_no , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
/* column is only valid if an input buffer exists. */
if (! YY_CURRENT_BUFFER )
yy_fatal_error( "cmCommandArgument_yyset_column called with no buffer" , yyscanner);
yycolumn = column_no;
}
/** Set the input stream. This does not discard the current
* input buffer.
* @param in_str A readable stream.
* @param yyscanner The scanner object.
* @see cmCommandArgument_yy_switch_to_buffer
*/
void cmCommandArgument_yyset_in (FILE * in_str , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
yyin = in_str ;
}
void cmCommandArgument_yyset_out (FILE * out_str , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
yyout = out_str ;
}
int cmCommandArgument_yyget_debug (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
return yy_flex_debug;
}
void cmCommandArgument_yyset_debug (int bdebug , yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
yy_flex_debug = bdebug ;
}
/* Accessor methods for yylval and yylloc */
/* User-visible API */
/* cmCommandArgument_yylex_init is special because it creates the scanner itself, so it is
* the ONLY reentrant function that doesn't take the scanner as the last argument.
* That's why we explicitly handle the declaration, instead of using our macros.
*/
int cmCommandArgument_yylex_init(yyscan_t* ptr_yy_globals)
{
if (ptr_yy_globals == NULL){
errno = EINVAL;
return 1;
}
*ptr_yy_globals = (yyscan_t) cmCommandArgument_yyalloc ( sizeof( struct yyguts_t ), NULL );
if (*ptr_yy_globals == NULL){
errno = ENOMEM;
return 1;
}
/* By setting to 0xAA, we expose bugs in yy_init_globals. Leave at 0x00 for releases. */
memset(*ptr_yy_globals,0x00,sizeof(struct yyguts_t));
return yy_init_globals ( *ptr_yy_globals );
}
/* cmCommandArgument_yylex_init_extra has the same functionality as cmCommandArgument_yylex_init, but follows the
* convention of taking the scanner as the last argument. Note however, that
* this is a *pointer* to a scanner, as it will be allocated by this call (and
* is the reason, too, why this function also must handle its own declaration).
* The user defined value in the first argument will be available to cmCommandArgument_yyalloc in
* the yyextra field.
*/
int cmCommandArgument_yylex_init_extra(YY_EXTRA_TYPE yy_user_defined,yyscan_t* ptr_yy_globals )
{
struct yyguts_t dummy_yyguts;
cmCommandArgument_yyset_extra (yy_user_defined, &dummy_yyguts);
if (ptr_yy_globals == NULL){
errno = EINVAL;
return 1;
}
*ptr_yy_globals = (yyscan_t) cmCommandArgument_yyalloc ( sizeof( struct yyguts_t ), &dummy_yyguts );
if (*ptr_yy_globals == NULL){
errno = ENOMEM;
return 1;
}
/* By setting to 0xAA, we expose bugs in
yy_init_globals. Leave at 0x00 for releases. */
memset(*ptr_yy_globals,0x00,sizeof(struct yyguts_t));
cmCommandArgument_yyset_extra (yy_user_defined, *ptr_yy_globals);
return yy_init_globals ( *ptr_yy_globals );
}
static int yy_init_globals (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
/* Initialization is the same as for the non-reentrant scanner.
* This function is called from cmCommandArgument_yylex_destroy(), so don't allocate here.
*/
yyg->yy_buffer_stack = 0;
yyg->yy_buffer_stack_top = 0;
yyg->yy_buffer_stack_max = 0;
yyg->yy_c_buf_p = (char *) 0;
yyg->yy_init = 0;
yyg->yy_start = 0;
yyg->yy_start_stack_ptr = 0;
yyg->yy_start_stack_depth = 0;
yyg->yy_start_stack = NULL;
/* Defined in main.c */
#ifdef YY_STDINIT
yyin = stdin;
yyout = stdout;
#else
yyin = (FILE *) 0;
yyout = (FILE *) 0;
#endif
/* For future reference: Set errno on error, since we are called by
* cmCommandArgument_yylex_init()
*/
return 0;
}
/* cmCommandArgument_yylex_destroy is for both reentrant and non-reentrant scanners. */
int cmCommandArgument_yylex_destroy (yyscan_t yyscanner)
{
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
/* Pop the buffer stack, destroying each element. */
while(YY_CURRENT_BUFFER){
cmCommandArgument_yy_delete_buffer(YY_CURRENT_BUFFER ,yyscanner );
YY_CURRENT_BUFFER_LVALUE = NULL;
cmCommandArgument_yypop_buffer_state(yyscanner);
}
/* Destroy the stack itself. */
cmCommandArgument_yyfree(yyg->yy_buffer_stack ,yyscanner);
yyg->yy_buffer_stack = NULL;
/* Destroy the start condition stack. */
cmCommandArgument_yyfree(yyg->yy_start_stack ,yyscanner );
yyg->yy_start_stack = NULL;
/* Reset the globals. This is important in a non-reentrant scanner so the next time
* cmCommandArgument_yylex() is called, initialization will occur. */
yy_init_globals( yyscanner);
/* Destroy the main struct (reentrant only). */
cmCommandArgument_yyfree ( yyscanner , yyscanner );
yyscanner = NULL;
return 0;
}
/*
* Internal utility routines.
*/
#ifndef yytext_ptr
static void yy_flex_strncpy (char* s1, yyconst char * s2, int n , yyscan_t yyscanner)
{
register int i;
for ( i = 0; i < n; ++i )
s1[i] = s2[i];
}
#endif
#ifdef YY_NEED_STRLEN
static int yy_flex_strlen (yyconst char * s , yyscan_t yyscanner)
{
register int n;
for ( n = 0; s[n]; ++n )
;
return n;
}
#endif
void *cmCommandArgument_yyalloc (yy_size_t size , yyscan_t)
{
return (void *) malloc( size );
}
void *cmCommandArgument_yyrealloc (void * ptr, yy_size_t size , yyscan_t)
{
/* The cast to (char *) in the following accommodates both
* implementations that use char* generic pointers, and those
* that use void* generic pointers. It works with the latter
* because both ANSI C and C++ allow castless assignment from
* any pointer type to void*, and deal with argument conversions
* as though doing an assignment.
*/
return (void *) realloc( (char *) ptr, size );
}
void cmCommandArgument_yyfree (void * ptr , yyscan_t)
{
free( (char *) ptr ); /* see cmCommandArgument_yyrealloc() for (char *) cast */
}
#define YYTABLES_NAME "yytables"
#line 149 "cmCommandArgumentLexer.in.l"
/*--------------------------------------------------------------------------*/
void cmCommandArgument_SetupEscapes(yyscan_t yyscanner, bool noEscapes)
{
/* Hack into the internal flex-generated scanner to set the state. */
struct yyguts_t * yyg = (struct yyguts_t*)yyscanner;
if(noEscapes)
{
BEGIN(NOESCAPES);
}
else
{
BEGIN(ESCAPES);
}
}