https://github.com/cilium/cilium
Tip revision: c5577e8e8987ec4355751094f09248fb58734fdc authored by Maciej Kwiek on 15 March 2023, 18:19:16 UTC
Prepare for release v1.11.15
Prepare for release v1.11.15
Tip revision: c5577e8
init.sh
#!/bin/bash
#
# Copyright 2016-2020 Authors of Cilium
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
LIB=$1
RUNDIR=$2
IP4_HOST=$3
IP6_HOST=$4
MODE=$5
TUNNEL_MODE=$6
# Only set if TUNNEL_MODE = "vxlan", "geneve"
TUNNEL_PORT=$7
# Only set if MODE = "direct", "ipvlan"
NATIVE_DEVS=$8
HOST_DEV1=$9
HOST_DEV2=${10}
MTU=${11}
HOSTLB=${12}
HOSTLB_UDP=${13}
HOSTLB_PEER=${14}
CGROUP_ROOT=${15}
BPFFS_ROOT=${16}
NODE_PORT=${17}
NODE_PORT_BIND=${18}
MCPU=${19}
NR_CPUS=${20}
ENDPOINT_ROUTES=${21}
PROXY_RULE=${22}
ID_HOST=1
ID_WORLD=2
# If the value below is changed, be sure to update bugtool/cmd/configuration.go
# as well when dumping the routing table in bugtool. See GH-5828.
PROXY_RT_TABLE=2005
TO_PROXY_RT_TABLE=2004
set -e
set -x
set -o pipefail
# Remove old legacy files
rm $RUNDIR/encap.state 2> /dev/null || true
# This directory was created by the daemon and contains the per container header file
DIR="$PWD/globals"
function setup_dev()
{
local -r NAME=$1
ip link set $NAME up
if [ "$IP6_HOST" != "<nil>" ]; then
echo 1 > /proc/sys/net/ipv6/conf/${NAME}/forwarding
fi
if [ "$IP4_HOST" != "<nil>" ]; then
echo 1 > /proc/sys/net/ipv4/conf/${NAME}/forwarding
echo 0 > /proc/sys/net/ipv4/conf/${NAME}/rp_filter
echo 1 > /proc/sys/net/ipv4/conf/${NAME}/accept_local
echo 0 > /proc/sys/net/ipv4/conf/${NAME}/send_redirects
fi
}
function move_local_rules_af()
{
IP=$1
# Do not move the rule if we don't support the address family
if [ -z "$($IP rule list)" ]; then
return
fi
# move the local table lookup rule from pref 0 to pref 100 so we can
# insert the cilium ip rules before the local table. It is strictly
# required to add the new local rule before deleting the old one as
# otherwise local addresses will not be reachable for a short period of
# time.
$IP rule list | grep 100 | grep "lookup local" || {
$IP rule add from all lookup local pref 100
}
$IP rule del from all lookup local pref 0 2> /dev/null || true
# check if the move of the local table move was successful and restore
# it otherwise
if [ "$($IP rule list | grep "lookup local" | wc -l)" -eq "0" ]; then
$IP rule add from all lookup local pref 0
$IP rule del from all lookup local pref 100
echo "Error: The kernel does not support moving the local table routing rule"
echo "Local routing rules:"
$IP rule list lookup local
exit 1
fi
}
function move_local_rules()
{
if [ "$IP4_HOST" != "<nil>" ]; then
move_local_rules_af "ip -4"
fi
if [ "$IP6_HOST" != "<nil>" ]; then
move_local_rules_af "ip -6"
fi
}
function setup_proxy_rules()
{
if [ "$MODE" = "ipvlan" ]; then
return
fi
# Any packet from an ingress proxy uses a separate routing table that routes
# the packet back to the cilium host device.
from_ingress_rulespec="fwmark 0xA00/0xF00 pref 10 lookup $PROXY_RT_TABLE"
# Any packet to an ingress or egress proxy uses a separate routing table
# that routes the packet to the loopback device regardless of the destination
# address in the packet. For this to work the ctx must have a socket set
# (e.g., via TPROXY).
to_proxy_rulespec="fwmark 0x200/0xF00 pref 9 lookup $TO_PROXY_RT_TABLE"
if [ "$IP4_HOST" != "<nil>" ]; then
if [ -n "$(ip -4 rule list)" ]; then
if [ -z "$(ip -4 rule list $to_proxy_rulespec)" ]; then
ip -4 rule add $to_proxy_rulespec
fi
if [ "$ENDPOINT_ROUTES" = "true" ]; then
if [ ! -z "$(ip -4 rule list $from_ingress_rulespec)" ]; then
ip -4 rule delete $from_ingress_rulespec
fi
else
if [ -z "$(ip -4 rule list $from_ingress_rulespec)" ]; then
ip -4 rule add $from_ingress_rulespec
fi
fi
fi
# Traffic to the host proxy is local
ip route replace table $TO_PROXY_RT_TABLE local 0.0.0.0/0 dev lo
# Traffic from ingress proxy goes to Cilium address space via the cilium host device
if [ "$ENDPOINT_ROUTES" = "true" ]; then
ip route delete table $PROXY_RT_TABLE $IP4_HOST/32 dev $HOST_DEV1 2>/dev/null || true
ip route delete table $PROXY_RT_TABLE default via $IP4_HOST 2>/dev/null || true
else
ip route replace table $PROXY_RT_TABLE $IP4_HOST/32 dev $HOST_DEV1
ip route replace table $PROXY_RT_TABLE default via $IP4_HOST
fi
else
ip -4 rule del $to_proxy_rulespec 2> /dev/null || true
ip -4 rule del $from_ingress_rulespec 2> /dev/null || true
fi
if [ "$IP6_HOST" != "<nil>" ]; then
if [ -n "$(ip -6 rule list)" ]; then
if [ -z "$(ip -6 rule list $to_proxy_rulespec)" ]; then
ip -6 rule add $to_proxy_rulespec
fi
if [ "$ENDPOINT_ROUTES" = "true" ]; then
if [ ! -z "$(ip -6 rule list $from_ingress_rulespec)" ]; then
ip -6 rule delete $from_ingress_rulespec
fi
else
if [ -z "$(ip -6 rule list $from_ingress_rulespec)" ]; then
ip -6 rule add $from_ingress_rulespec
fi
fi
fi
IP6_LLADDR=$(ip -6 addr show dev $HOST_DEV2 | grep inet6 | head -1 | awk '{print $2}' | awk -F'/' '{print $1}')
if [ -n "$IP6_LLADDR" ]; then
# Traffic to the host proxy is local
ip -6 route replace table $TO_PROXY_RT_TABLE local ::/0 dev lo
# Traffic from ingress proxy goes to Cilium address space via the cilium host device
if [ "$ENDPOINT_ROUTES" = "true" ]; then
ip -6 route delete table $PROXY_RT_TABLE ${IP6_LLADDR}/128 dev $HOST_DEV1 2>/dev/null || true
ip -6 route delete table $PROXY_RT_TABLE default via $IP6_LLADDR dev $HOST_DEV1 2>/dev/null || true
else
ip -6 route replace table $PROXY_RT_TABLE ${IP6_LLADDR}/128 dev $HOST_DEV1
ip -6 route replace table $PROXY_RT_TABLE default via $IP6_LLADDR dev $HOST_DEV1
fi
fi
else
ip -6 rule del $to_proxy_rulespec 2> /dev/null || true
ip -6 rule del $from_ingress_rulespec 2> /dev/null || true
fi
}
function mac2array()
{
echo "{0x${1//:/,0x}}"
}
function rnd_mac_addr()
{
local lower=$(od /dev/urandom -N5 -t x1 -An | sed 's/ /:/g')
local upper=$(( 0x$(od /dev/urandom -N1 -t x1 -An | cut -d' ' -f2) & 0xfe | 0x02 ))
printf '%02x%s' $upper $lower
}
function bpf_compile()
{
IN=$1
OUT=$2
TYPE=$3
EXTRA_OPTS=$4
clang -O2 -target bpf -std=gnu89 -nostdinc -emit-llvm \
-g -Wall -Wextra -Werror -Wshadow \
-Wno-address-of-packed-member \
-Wno-unknown-warning-option \
-Wno-gnu-variable-sized-type-not-at-end \
-Wdeclaration-after-statement \
-I. -I$DIR -I$LIB -I$LIB/include \
-D__NR_CPUS__=$NR_CPUS \
-DENABLE_ARP_RESPONDER=1 \
$EXTRA_OPTS \
-c $LIB/$IN -o - | \
llc -march=bpf -mcpu=$MCPU -mattr=dwarfris -filetype=$TYPE -o $OUT
}
function bpf_unload()
{
DEV=$1
WHERE=$2
tc filter del dev $DEV $WHERE 2> /dev/null || true
}
function bpf_load()
{
DEV=$1
OPTS=$2
WHERE=$3
IN=$4
OUT=$5
SEC=$6
CALLS_MAP=$7
NODE_MAC=$(ip link show $DEV | grep ether | awk '{print $2}')
NODE_MAC="{.addr=$(mac2array $NODE_MAC)}"
OPTS="${OPTS} -DNODE_MAC=${NODE_MAC} -DCALLS_MAP=${CALLS_MAP}"
bpf_compile $IN $OUT obj "$OPTS"
tc qdisc replace dev $DEV clsact || true
[ -z "$(tc filter show dev $DEV $WHERE | grep -v 'pref 1 bpf chain 0 $\|pref 1 bpf chain 0 handle 0x1')" ] || tc filter del dev $DEV $WHERE
cilium bpf migrate-maps -s "$OUT"
if ! tc filter replace dev "$DEV" "$WHERE" prio 1 handle 1 bpf da obj "$OUT" sec "$SEC"; then
cilium bpf migrate-maps -e "$OUT" -r 1
return 1
fi
}
function bpf_load_cgroups()
{
OPTS=$1
IN=$2
OUT=$3
PROG_TYPE=$4
WHERE=$5
CALLS_MAP=$6
CGRP=$7
BPFMNT=$8
OPTS="${OPTS} -DCALLS_MAP=${CALLS_MAP}"
bpf_compile $IN $OUT obj "$OPTS"
TMP_FILE="$BPFMNT/tc/globals/cilium_cgroups_$WHERE"
rm -f $TMP_FILE
cilium bpf migrate-maps -s "$OUT"
if ! tc exec bpf pin "$TMP_FILE" obj "$OUT" type "$PROG_TYPE" attach_type "$WHERE" sec "cgroup/$WHERE"; then
cilium bpf migrate-maps -e "$OUT" -r 1
return 1
fi
if ! bpftool cgroup attach "$CGRP" "$WHERE" pinned "$TMP_FILE"; then
rm -f "$TMP_FILE"
cilium bpf migrate-maps -e "$OUT" -r 1
return 1
fi
}
function bpf_clear_cgroups()
{
CGRP=$1
HOOK=$2
set +e
ID=$(bpftool cgroup show $CGRP | grep -w $HOOK | awk '{print $1}')
set -e
if [ -n "$ID" ]; then
bpftool cgroup detach $CGRP $HOOK id $ID
fi
}
function create_encap_dev()
{
TUNNEL_OPTS="external"
if [ "${TUNNEL_PORT}" != "<nil>" ]; then
TUNNEL_OPTS="dstport $TUNNEL_PORT $TUNNEL_OPTS"
fi
ip link add name $ENCAP_DEV address $(rnd_mac_addr) type $TUNNEL_MODE $TUNNEL_OPTS || encap_fail
}
function encap_fail()
{
(>&2 echo "ERROR: Setup of encapsulation device $ENCAP_DEV has failed. Is another program using a $MODE device?")
(>&2 echo "Configured $MODE devices on the system:")
(>&2 ip link show type $MODE)
exit 1
}
# node_config.h header generation
case "${MODE}" in
*)
sed -i '/^#.*CILIUM_NET_MAC.*$/d' $RUNDIR/globals/node_config.h
CILIUM_NET_MAC=$(ip link show $HOST_DEV2 | grep ether | awk '{print $2}')
CILIUM_NET_MAC=$(mac2array $CILIUM_NET_MAC)
# Remove the entire '#ifndef ... #endif block
# Each line must contain the string '#.*CILIUM_NET_MAC.*'
sed -i '/^#.*CILIUM_NET_MAC.*$/d' $RUNDIR/globals/node_config.h
echo "#ifndef CILIUM_NET_MAC" >> $RUNDIR/globals/node_config.h
echo "#define CILIUM_NET_MAC { .addr = ${CILIUM_NET_MAC}}" >> $RUNDIR/globals/node_config.h
echo "#endif /* CILIUM_NET_MAC */" >> $RUNDIR/globals/node_config.h
sed -i '/^#.*HOST_IFINDEX.*$/d' $RUNDIR/globals/node_config.h
HOST_IDX=$(cat /sys/class/net/${HOST_DEV2}/ifindex)
echo "#define HOST_IFINDEX $HOST_IDX" >> $RUNDIR/globals/node_config.h
sed -i '/^#.*HOST_IFINDEX_MAC.*$/d' $RUNDIR/globals/node_config.h
HOST_MAC=$(ip link show $HOST_DEV1 | grep ether | awk '{print $2}')
HOST_MAC=$(mac2array $HOST_MAC)
echo "#define HOST_IFINDEX_MAC { .addr = ${HOST_MAC}}" >> $RUNDIR/globals/node_config.h
sed -i '/^#.*CILIUM_IFINDEX.*$/d' $RUNDIR/globals/node_config.h
CILIUM_IDX=$(cat /sys/class/net/${HOST_DEV1}/ifindex)
echo "#define CILIUM_IFINDEX $CILIUM_IDX" >> $RUNDIR/globals/node_config.h
CILIUM_EPHEMERAL_MIN=$(cat /proc/sys/net/ipv4/ip_local_port_range | awk '{print $1}')
echo "#define EPHEMERAL_MIN $CILIUM_EPHEMERAL_MIN" >> $RUNDIR/globals/node_config.h
esac
# If the host does not have an IPv6 address assigned, assign our generated host
# IP to make the host accessible to endpoints
if [ "$IP6_HOST" != "<nil>" ]; then
[ -n "$(ip -6 addr show to $IP6_HOST dev $HOST_DEV1)" ] || ip -6 addr add $IP6_HOST dev $HOST_DEV1
fi
if [ "$IP4_HOST" != "<nil>" ]; then
[ -n "$(ip -4 addr show to $IP4_HOST dev $HOST_DEV1)" ] || ip -4 addr add $IP4_HOST dev $HOST_DEV1 scope link
fi
if [ "$PROXY_RULE" = "true" ]; then
# Decrease priority of the rule to identify local addresses
move_local_rules
# Install new rules before local rule to ensure that packets from the proxy are
# using a separate routing table
setup_proxy_rules
fi
if [ "$MODE" = "ipip" ]; then
if [ "$IP4_HOST" != "<nil>" ]; then
ENCAP_DEV="cilium_ipip4"
ip link show $ENCAP_DEV || {
# Upon module load it will create a non-removable tunl0
# device. Instead of creating an additional useless one,
# rename tunl0 with cilium prefix in a second step. If
# we to do 'ip link add name $ENCAP_DEV [...]' it would
# create two devices. :/
ip link add name tunl0 type ipip external || true
ip link set tunl0 name $ENCAP_DEV
}
setup_dev $ENCAP_DEV || encap_fail
ENCAP_IDX=$(cat /sys/class/net/${ENCAP_DEV}/ifindex)
sed -i '/^#.*ENCAP4_IFINDEX.*$/d' $RUNDIR/globals/node_config.h
echo "#define ENCAP4_IFINDEX $ENCAP_IDX" >> $RUNDIR/globals/node_config.h
else
ip link del cilium_ipip4 2> /dev/null || true
fi
if [ "$IP6_HOST" != "<nil>" ]; then
ENCAP_DEV="cilium_ipip6"
ip link show $ENCAP_DEV || {
# For cilium_ipip6 device, we unfortunately cannot use the
# same workaround as cilium_ipip4. While the latter allows
# to set an existing tunl0 into collect_md mode, the default
# ip6tnl0 if present cannot. It's quite annoying, but if v6
# was built into the kernel, we might just need to live with
# it. Default device creation can still be worked around
# via boot param if the sysctl from agent won't do it.
ip link add name $ENCAP_DEV type ip6tnl external || true
ip link set sit0 name cilium_sit || true
}
setup_dev $ENCAP_DEV || encap_fail
ENCAP_IDX=$(cat /sys/class/net/${ENCAP_DEV}/ifindex)
sed -i '/^#.*ENCAP6_IFINDEX.*$/d' $RUNDIR/globals/node_config.h
echo "#define ENCAP6_IFINDEX $ENCAP_IDX" >> $RUNDIR/globals/node_config.h
else
ip link del cilium_ipip6 2> /dev/null || true
ip link del cilium_sit 2> /dev/null || true
fi
else
ip link del cilium_ipip4 2> /dev/null || true
ip link del cilium_ipip6 2> /dev/null || true
ip link del cilium_sit 2> /dev/null || true
fi
if [ "$MODE" = "tunnel" ]; then
sed -i '/^#.*TUNNEL_MODE.*$/d' $RUNDIR/globals/node_config.h
echo "#define TUNNEL_MODE 1" >> $RUNDIR/globals/node_config.h
fi
if [ "${TUNNEL_MODE}" != "<nil>" ]; then
ENCAP_DEV="cilium_${TUNNEL_MODE}"
ip link show $ENCAP_DEV || create_encap_dev
if [ "${TUNNEL_PORT}" != "<nil>" ]; then
ip -details link show $ENCAP_DEV | grep "dstport $TUNNEL_PORT" || {
ip link delete name $ENCAP_DEV type $TUNNEL_MODE
create_encap_dev
}
fi
ip link set $ENCAP_DEV mtu $MTU || encap_fail
setup_dev $ENCAP_DEV || encap_fail
ENCAP_IDX=$(cat /sys/class/net/${ENCAP_DEV}/ifindex)
sed -i '/^#.*ENCAP_IFINDEX.*$/d' $RUNDIR/globals/node_config.h
echo "#define ENCAP_IFINDEX $ENCAP_IDX" >> $RUNDIR/globals/node_config.h
CALLS_MAP="cilium_calls_overlay_${ID_WORLD}"
COPTS="-DSECLABEL=${ID_WORLD} -DFROM_ENCAP_DEV=1"
if [ "$NODE_PORT" = "true" ]; then
COPTS="${COPTS} -DDISABLE_LOOPBACK_LB"
fi
bpf_load "$ENCAP_DEV" "$COPTS" ingress bpf_overlay.c bpf_overlay.o from-overlay "$CALLS_MAP"
bpf_load "$ENCAP_DEV" "$COPTS" egress bpf_overlay.c bpf_overlay.o to-overlay "$CALLS_MAP"
cilium bpf migrate-maps -e bpf_overlay.o -r 0
else
# Remove eventual existing encapsulation device from previous run
ip link del cilium_vxlan 2> /dev/null || true
ip link del cilium_geneve 2> /dev/null || true
fi
if [ "$MODE" = "direct" ] || [ "$MODE" = "ipvlan" ] || [ "$NODE_PORT" = "true" ] ; then
if [ "$NATIVE_DEVS" == "<nil>" ]; then
echo "No device specified for $MODE mode, ignoring..."
else
if [ "$IP6_HOST" != "<nil>" ]; then
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
fi
echo "$NATIVE_DEVS" > $RUNDIR/device.state
fi
else
FILE=$RUNDIR/device.state
if [ -f $FILE ]; then
DEVS=$(cat $FILE)
for DEV in ${DEVS//,/ }; do
echo "Removed BPF program from device $DEV"
tc qdisc del dev $DEV clsact 2> /dev/null || true
done
rm $FILE
fi
fi
# Remove bpf_host.o from previously used devices
for iface in $(ip -o -a l | awk '{print $2}' | cut -d: -f1 | cut -d@ -f1 | grep -v cilium); do
found=false
for NATIVE_DEV in ${NATIVE_DEVS//;/ }; do
if [ "${iface}" == "$NATIVE_DEV" ]; then
found=true
break
fi
done
$found && continue
for where in ingress egress; do
if tc filter show dev "$iface" "$where" | grep -q "bpf_netdev[^\.]*.o"; then
echo "Removing bpf_netdev.o from $where of $iface"
tc filter del dev "$iface" "$where" || true
fi
if tc filter show dev "$iface" "$where" | grep -q "bpf_host.o"; then
echo "Removing bpf_host.o from $where of $iface"
tc filter del dev "$iface" "$where" || true
fi
done
done
if [ "$HOSTLB" = "true" ]; then
if [ "$IP6_HOST" != "<nil>" ]; then
echo 1 > /proc/sys/net/ipv6/conf/all/forwarding
fi
CALLS_MAP="cilium_calls_lb"
COPTS=""
if [ "$IP6_HOST" != "<nil>" ] || [ "$IP4_HOST" != "<nil>" ] && [ -f /proc/sys/net/ipv6/conf/all/forwarding ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr connect6 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
if [ "$HOSTLB_PEER" = "true" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr getpeername6 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
fi
if [ "$NODE_PORT" = "true" ] && [ "$NODE_PORT_BIND" = "true" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sock post_bind6 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
else
bpf_clear_cgroups $CGROUP_ROOT post_bind6
fi
if [ "$MODE" = "ipip" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr bind6 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
else
bpf_clear_cgroups $CGROUP_ROOT bind6
fi
if [ "$HOSTLB_UDP" = "true" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr sendmsg6 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr recvmsg6 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
else
bpf_clear_cgroups $CGROUP_ROOT sendmsg6
bpf_clear_cgroups $CGROUP_ROOT recvmsg6
fi
fi
if [ "$IP4_HOST" != "<nil>" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr connect4 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
if [ "$HOSTLB_PEER" = "true" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr getpeername4 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
fi
if [ "$NODE_PORT" = "true" ] && [ "$NODE_PORT_BIND" = "true" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sock post_bind4 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
else
bpf_clear_cgroups $CGROUP_ROOT post_bind4
fi
if [ "$MODE" = "ipip" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr bind4 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
else
bpf_clear_cgroups $CGROUP_ROOT bind4
fi
if [ "$HOSTLB_UDP" = "true" ]; then
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr sendmsg4 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
bpf_load_cgroups "$COPTS" bpf_sock.c bpf_sock.o sockaddr recvmsg4 $CALLS_MAP $CGROUP_ROOT $BPFFS_ROOT
else
bpf_clear_cgroups $CGROUP_ROOT sendmsg4
bpf_clear_cgroups $CGROUP_ROOT recvmsg4
fi
fi
cilium bpf migrate-maps -e bpf_sock.o -r 0
else
bpf_clear_cgroups $CGROUP_ROOT bind4
bpf_clear_cgroups $CGROUP_ROOT bind6
bpf_clear_cgroups $CGROUP_ROOT post_bind4
bpf_clear_cgroups $CGROUP_ROOT post_bind6
bpf_clear_cgroups $CGROUP_ROOT connect4
bpf_clear_cgroups $CGROUP_ROOT connect6
bpf_clear_cgroups $CGROUP_ROOT sendmsg4
bpf_clear_cgroups $CGROUP_ROOT sendmsg6
bpf_clear_cgroups $CGROUP_ROOT recvmsg4
bpf_clear_cgroups $CGROUP_ROOT recvmsg6
bpf_clear_cgroups $CGROUP_ROOT getpeername4
bpf_clear_cgroups $CGROUP_ROOT getpeername6
fi
if [ "$HOST_DEV1" != "$HOST_DEV2" ]; then
bpf_unload $HOST_DEV2 "egress"
fi
# Compile dummy BPF file containing all shared struct definitions used by
# pkg/alignchecker to validate C and Go equivalent struct alignments
bpf_compile bpf_alignchecker.c bpf_alignchecker.o obj ""