https://github.com/google/jax
Tip revision: c5d6281b77a9a90fbe15c6894a9c9528274ca6af authored by jax authors on 15 January 2021, 00:25:33 UTC
Merge pull request #5430 from skye:fix
Merge pull request #5430 from skye:fix
Tip revision: c5d6281
faq.rst
JAX Frequently Asked Questions (FAQ)
====================================
.. comment RST primer for Sphinx: https://thomas-cokelaer.info/tutorials/sphinx/rest_syntax.html
.. comment Some links referenced here. Use JAX_sharp_bits_ (underscore at the end) to reference
.. _JAX_sharp_bits: https://jax.readthedocs.io/en/latest/notebooks/Common_Gotchas_in_JAX.html
.. _How_JAX_primitives_work: https://jax.readthedocs.io/en/latest/notebooks/How_JAX_primitives_work.html
We are collecting here answers to frequently asked questions.
Contributions welcome!
``jit`` changes the behavior of my function
--------------------------------------------
If you have a Python function that changes behavior after using :func:`jax.jit`, perhaps
your function uses global state, or has side-effects. In the following code, the
``impure_func`` uses the global ``y`` and has a side-effect due to ``print``::
y = 0
# @jit # Different behavior with jit
def impure_func(x):
print("Inside:", y)
return x + y
for y in range(3):
print("Result:", impure_func(y))
Without ``jit`` the output is::
Inside: 0
Result: 0
Inside: 1
Result: 2
Inside: 2
Result: 4
and with ``jit`` it is::
Inside: 0
Result: 0
Result: 1
Result: 2
For :func:`jax.jit`, the function is executed once using the Python interpreter, at which time the
``Inside`` printing happens, and the first value of ``y`` is observed. Then, the function
is compiled and cached, and executed multiple times with different values of ``x``, but
with the same first value of ``y``.
Additional reading:
* JAX_sharp_bits_
.. _faq-slow-compile:
``jit`` decorated function is very slow to compile
--------------------------------------------------
If your ``jit`` decorated function takes tens of seconds (or more!) to run the
first time you call it, but executes quickly when called again, JAX is taking a
long time to trace or compile your code.
This is usually a symptom of calling your function generating a large amount of
code in JAX's internal representation, typically because it makes heavy use of
Python control flow such as ``for`` loop. For a handful of loop iterations
Python is OK, but if you need _many_ loop iterations, you should rewrite your
code to make use of JAX's
`structured control flow primitives <https://jax.readthedocs.io/en/latest/notebooks/Common_Gotchas_in_JAX.html#Structured-control-flow-primitives>`_
(such as :func:`lax.scan`) or avoid wrapping the loop with ``jit`` (you can
still use ``jit`` decorated functions *inside* the loop).
If you're not sure if this is the problem, you can try running
:func:`jax.make_jaxpr` on your function. You can expect slow compilation if the
output is many hundreds or thousands of lines long.
Sometimes it isn't obvious how to rewrite your code to avoid Python loops
because your code makes use of many arrays with different shapes. The
recommended solution in this case is to make use of functions like
:func:`jax.numpy.where` to do your computation on padded arrays with fixed
shape. The JAX team is exploring a "masking" transformation to make such code
easier to write.
If your functions are slow to compile for another reason, please open an issue
on GitHub.
.. _faq-data-placement:
Controlling data and computation placement on devices
-----------------------------------------------------
Let's first look at the principles of data and computation placement in JAX.
In JAX, the computation follows data placement. JAX arrays
have two placement properties: 1) the device where the data resides;
and 2) whether it is **committed** to the device or not (the data is sometimes
referred to as being *sticky* to the device).
By default, JAX arrays are placed uncommitted on the default device
(``jax.devices()[0]``), which is the first GPU by default. If no GPU is
present, ``jax.devices()[0]`` is the first CPU. The default device can
be set to "cpu" or "gpu" manually by setting the environment variable
``JAX_PLATFORM_NAME`` or the absl flag ``--jax_platform_name``.
>>> from jax import numpy as jnp
>>> print(jnp.ones(3).device_buffer.device()) # doctest: +SKIP
gpu:0
Computations involving uncommitted data are performed on the default
device and the results are uncommitted on the default device.
Data can also be placed explicitly on a device using :func:`jax.device_put`
with a ``device`` parameter, in which case the data becomes **committed** to the device:
>>> import jax
>>> from jax import device_put
>>> print(device_put(1, jax.devices()[2]).device_buffer.device()) # doctest: +SKIP
gpu:2
Computations involving some committed inputs will happen on the
committed device and the result will be committed on the
same device. Invoking an operation on arguments that are committed
to more than one device will raise an error.
You can also use :func:`jax.device_put` without a ``device`` parameter. If the data
is already on a device (committed or not), it's left as-is. If the data isn't on any
device—that is, it's a regular Python or NumPy value—it's placed uncommitted on the default
device.
Jitted functions behave like any other primitive operations—they will follow the
data and will show errors if invoked on data committed on more than one device.
``jnp.device_put(jnp.zeros(...), jax.devices()[1])`` or similar will actually create the
array of zeros on ``jax.devices()[1]``, instead of creating the array on the default
device then moving it. This is thanks to some laziness in array creation, which holds
for all the constant creation operations (``ones``, ``full``, ``eye``, etc).
(As of April 2020, :func:`jax.jit` has a `device` parameter that affects the device
placement. That parameter is experimental, is likely to be removed or changed,
and its use is not recommended.)
For a worked-out example, we recommend reading through
``test_computation_follows_data`` in
`multi_device_test.py <https://github.com/google/jax/blob/master/tests/multi_device_test.py>`_.
.. comment We refer to the anchor below in JAX error messages
``Abstract tracer value encountered where concrete value is expected`` error
----------------------------------------------------------------------------
If you are getting an error that a library function is called with
*"Abstract tracer value encountered where concrete value is expected"*, you may need to
change how you invoke JAX transformations. Below is an example and a couple of possible
solutions, followed by the details of what is actually happening, if you are curious
or the simple solution does not work for you.
Some library functions take arguments that specify shapes or axes,
such as the second and third arguments for :func:`jax.numpy.split`::
# def np.split(arr, num_sections: Union[int, Sequence[int]], axis: int):
np.split(np.zeros(2), 2, 0) # works
If you try the following code::
jax.jit(np.split)(np.zeros(4), 2, 0)
you will get the following error::
ConcretizationTypeError: Abstract tracer value encountered where concrete value is expected (in jax.numpy.split argument 1).
Use transformation parameters such as `static_argnums` for `jit` to avoid tracing input values.
See `https://jax.readthedocs.io/en/latest/faq.html#abstract-tracer-value-where-concrete-value-is-expected-error`.
Encountered value: Traced<ShapedArray(int32[], weak_type=True):JaxprTrace(level=-1/1)>
You must change the way you use :func:`jax.jit` to ensure that the ``num_sections``
and ``axis`` arguments use their concrete values (``2`` and ``0`` respectively).
The best mechanism is to use special transformation parameters
to declare some arguments to be static, e.g., ``static_argnums`` for :func:`jax.jit`::
jax.jit(np.split, static_argnums=(1, 2))(np.zeros(4), 2, 0)
An alternative is to apply the transformation to a closure
that encapsulates the arguments to be protected, either manually as below
or by using ``functools.partial``::
jax.jit(lambda arr: np.split(arr, 2, 0))(np.zeros(4))
**Note a new closure is created at every invocation, which defeats the
compilation caching mechanism, which is why static_argnums is preferred.**
To understand more subtleties having to do with tracers vs. regular values, and
concrete vs. abstract values, you may want to read `Different kinds of JAX values`_.
Different kinds of JAX values
------------------------------
In the process of transforming functions, JAX replaces some function
arguments with special tracer values.
You could see this if you use a ``print`` statement::
def func(x):
print(x)
return np.cos(x)
res = jax.jit(func)(0.)
The above code does return the correct value ``1.`` but it also prints
``Traced<ShapedArray(float32[])>`` for the value of ``x``. Normally, JAX
handles these tracer values internally in a transparent way, e.g.,
in the numeric JAX primitives that are used to implement the
``jax.numpy`` functions. This is why ``np.cos`` works in the example above.
More precisely, a **tracer** value is introduced for the argument of
a JAX-transformed function, except the arguments identified by special
parameters such as ``static_argnums`` for :func:`jax.jit` or
``static_broadcasted_argnums`` for :func:`jax.pmap`. Typically, computations
that involve at least a tracer value will produce a tracer value. Besides tracer
values, there are **regular** Python values: values that are computed outside JAX
transformations, or arise from above-mentioned static arguments of certain JAX
transformations, or computed solely from other regular Python values.
These are the values that are used everywhere in absence of JAX transformations.
A tracer value carries an **abstract** value, e.g., ``ShapedArray`` with information
about the shape and dtype of an array. We will refer here to such tracers as
**abstract tracers**. Some tracers, e.g., those that are
introduced for arguments of autodiff transformations, carry ``ConcreteArray``
abstract values that actually include the regular array data, and are used,
e.g., for resolving conditionals. We will refer here to such tracers
as **concrete tracers**. Tracer values computed from these concrete tracers,
perhaps in combination with regular values, result in concrete tracers.
A **concrete value** is either a regular value or a concrete tracer.
Most often values computed from tracer values are themselves tracer values.
There are very few exceptions, when a computation can be entirely done
using the abstract value carried by a tracer, in which case the result
can be a regular value. For example, getting the shape of a tracer
with ``ShapedArray`` abstract value. Another example is when explicitly
casting a concrete tracer value to a regular type, e.g., ``int(x)`` or
``x.astype(float)``.
Another such situation is for ``bool(x)``, which produces a Python bool when
concreteness makes it possible. That case is especially salient because
of how often it arises in control flow.
Here is how the transformations introduce abstract or concrete tracers:
* :func:`jax.jit`: introduces **abstract tracers** for all positional arguments
except those denoted by ``static_argnums``, which remain regular
values.
* :func:`jax.pmap`: introduces **abstract tracers** for all positional arguments
except those denoted by ``static_broadcasted_argnums``.
* :func:`jax.vmap`, :func:`jax.make_jaxpr`, :func:`xla_computation`:
introduce **abstract tracers** for all positional arguments.
* :func:`jax.jvp` and :func:`jax.grad` introduce **concrete tracers**
for all positional arguments. An exception is when these transformations
are within an outer transformation and the actual arguments are
themselves abstract tracers; in that case, the tracers introduced
by the autodiff transformations are also abstract tracers.
* All higher-order control-flow primitives (:func:`lax.cond`, :func:`lax.while_loop`,
:func:`lax.fori_loop`, :func:`lax.scan`) when they process the functionals
introduce **abstract tracers**, whether or not there is a JAX transformation
in progress.
All of this is relevant when you have code that can operate
only on regular Python values, such as code that has conditional
control-flow based on data::
def divide(x, y):
return x / y if y >= 1. else 0.
If we want to apply :func:`jax.jit`, we must ensure to specify ``static_argnums=1``
to ensure ``y`` stays a regular value. This is due to the boolean expression
``y >= 1.``, which requires concrete values (regular or tracers). The
same would happen if we write explicitly ``bool(y >= 1.)``, or ``int(y)``,
or ``float(y)``.
Interestingly, ``jax.grad(divide)(3., 2.)``, works because :func:`jax.grad`
uses concrete tracers, and resolves the conditional using the concrete
value of ``y``.
Gradients contain `NaN` where using ``where``
------------------------------------------------
If you define a function using ``where`` to avoid an undefined value, if you
are not careful you may obtain a ``NaN`` for reverse differentiation::
def my_log(x):
return np.where(x > 0., np.log(x), 0.)
my_log(0.) ==> 0. # Ok
jax.grad(my_log)(0.) ==> NaN
A short explanation is that during ``grad`` computation the adjoint corresponding
to the undefined ``np.log(x)`` is a ``NaN`` and when it gets accumulated to the
adjoint of the ``np.where``. The correct way to write such functions is to ensure
that there is a ``np.where`` *inside* the partially-defined function, to ensure
that the adjoint is always finite::
def safe_for_grad_log(x):
return np.log(np.where(x > 0., x, 1.))
safe_for_grad_log(0.) ==> 0. # Ok
jax.grad(safe_for_grad_log)(0.) ==> 0. # Ok
The inner ``np.where`` may be needed in addition to the original one, e.g.::
def my_log_or_y(x, y):
"""Return log(x) if x > 0 or y"""
return np.where(x > 0., np.log(np.where(x > 0., x, 1.), y)
Additional reading:
* `Issue: gradients through np.where when one of branches is nan <https://github.com/google/jax/issues/1052#issuecomment-514083352>`_.
* `How to avoid NaN gradients when using where <https://github.com/tensorflow/probability/blob/master/discussion/where-nan.pdf>`_.