https://github.com/latex3/latex2e
Tip revision: 7e69456d4c8e22fff396c988ed942a0a8726a2ab authored by Joseph Wright on 16 June 2022, 11:39:48 UTC
Step release tag (cyrillic)
Step release tag (cyrillic)
Tip revision: 7e69456
ltfloat.dtx
% \iffalse meta-comment
%
% Copyright (C) 1993-2022
% The LaTeX Project and any individual authors listed elsewhere
% in this file.
%
% This file is part of the LaTeX base system.
% -------------------------------------------
%
% It may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3c
% of this license or (at your option) any later version.
% The latest version of this license is in
% https://www.latex-project.org/lppl.txt
% and version 1.3c or later is part of all distributions of LaTeX
% version 2008 or later.
%
% This file has the LPPL maintenance status "maintained".
%
% The list of all files belonging to the LaTeX base distribution is
% given in the file `manifest.txt'. See also `legal.txt' for additional
% information.
%
% The list of derived (unpacked) files belonging to the distribution
% and covered by LPPL is defined by the unpacking scripts (with
% extension .ins) which are part of the distribution.
%
% \fi
% \iffalse
%%% From File: ltfloat.dtx
%
%<*driver>
% \fi
\ProvidesFile{ltfloat.dtx}[2021/10/14 v1.2g LaTeX Kernel (Floats)]
% \iffalse
\documentclass{ltxdoc}
\GetFileInfo{ltfloat.dtx}
\title{\filename}
\date{\filedate}
\author{%
Johannes Braams\and
David Carlisle\and
Alan Jeffrey\and
Leslie Lamport\and
Frank Mittelbach\and
Chris Rowley\and
Rainer Sch\"opf}
\begin{document}
\MaintainedByLaTeXTeam{latex}
\maketitle
\DocInput{\filename}
\end{document}
%</driver>
% \fi
%
%
% \section{Floats}
%
% The different types of floats are identified by a \meta{type} name,
% which is the name of the counter for that kind of float. For
% example, figures are of type `figure' and tables are of type `table'.
% Each \meta{type} has associated a positive \meta{type number}, which
% is a power of two. E.g.,\\
% figures might be have type number~1, tables type number~2, programs
% type number~4, etc.
%
% The locations where a float can go are specified by a
% \meta{placement specifier}, which is a list of the possible
% locations, each denoted by a letter as follows:
% \begin{center}
% \begin{tabular}{l@{ : }l@{ --- }l}
% h & here & at the current location in the text.\\
% t & top & at the top of a text page.\\
% b & bottom & at the bottom of a text page.\\
% p & page & on a separate float page
% \end{tabular}
% \end{center}
% In addition, in conjunction with these, you can use `!' which means
% that the current values of the float positioning parameters are
% ignored for this float. (Has no effect on `p', float page
% positioning.)
% For example, `pht' specifies that the float can appear in any of
% three locations: page, here or top.
%
% \MaybeStop{}
%
%
% \changes{v1.0a}{1994/03/04}{Initial version, split from latex.dtx}
% \changes{v1.0b}{1994/03/28}{Split further from ltherest.dtx}
% \changes{v1.0e}{1994/04/25}{Changed warning messages}
% \changes{v1.0e}{1994/04/25}{Removed obsolete tracing code}
% \changes{v1.0f}{1994/05/03}
% {(CAR) Added \cs{@largefloatcheck}}
% \changes{v1.0f}{1994/05/03}{Removed unnecessary braces from
% arguments of \cs{@ifnextchar}}
% \changes{v1.0i}{1994/05/22}{Use new warning commands}
% \changes{v1.1e}{1994/11/17}
% {\cs{@tempa} to \cs{reserved@a}}
% \changes{v1.1g}{1994/12/10}{Some temps reinserted temporarily}
% \changes{v1.1n}{1995/11/28}{documentation fixes}
% \changes{v1.1s}{1997/06/16}{documentation fixes}
%
% \subsection{Floating Environments}
% \begin{macrocode}
%<*2ekernel>
\message{floats,}
% \end{macrocode}
% \begin{oldcomments}
%
% Where floats may appear on a page, and how many may appear there
% are specified by the following float placement parameters. The
% numbers are named like counters so the user can set them with
% the ordinary counter-setting commands.
%
% \c@topnumber : Number of floats allowed at the top of a column.
% \topfraction : Fraction of column that can be devoted to floats.
% \c@dbltopnumber, \dbltopfraction
% : Same as above, but for double-column floats.
% \c@bottomnumber, \bottomfraction
% : Same as above for bottom of page.
% \c@totalnumber : Number of floats allowed in a single column,
% including in-text floats.
% \textfraction :Minimum fraction of column that must contain text.
% \floatpagefraction: Minimum fraction of page that must be taken
% up by float page.
% \dblfloatpagefraction
% : Same as above, for double-column floats.
%
% The document style must define the following.
%
% \fps@TYPE : The default placement specifier for floats of type
% TYPE.
%
% \ftype@TYPE : The type number for floats of type TYPE.
%
% \ext@TYPE : The file extension indicating the file on which the
% contents list for float type TYPE is stored.
% For example, \ext@figure = 'lof'.
%
% \fnum@TYPE : A macro to generate the figure number for a caption.
% For example, \fnum@TYPE == Figure \thefigure.
%
% \@makecaption{NUM}{TEXT} :
% A macro to make a caption, with NUM the value
% produced by \fnum@... and TEXT the text of the caption.
% It can assume it's in a \parbox of the appropriate width.
%
% \@float{TYPE}[PLACEMENT] : This macro begins a float environment for a
% single-column float of type TYPE with PLACEMENT as the placement
% specifier. The default value of PLACEMENT is defined by
% \fps@TYPE. The environment is ended by \end@float.
% E.g., \figure == \@float{figure}, \endfigure == \end@float.
%
% \@float{TYPE}[PLACEMENT] ==
% BEGIN
% if hmode then \@bsphack
% \@floatpenalty := -10002
% else \@floatpenalty := -10003
% fi
% \@captype ==L TYPE
% \@dblflset
% \@fps ==L PLACEMENT
% \@onelevel@sanitize \@fps
% add default PLACEMENT if at most ! in PLACEMENT == \@fpsadddefault
% if inner
% then LaTeX Error: 'Not in outer paragraph mode.'
% \@floatpenalty := 0
% else if \@freelist nonempty
% then \@currbox :=L head of \@freelist
% \@freelist :=G tail of \@freelist
% \count\@currbox :=G 32*\ftype@TYPE +
% bits determined by PLACEMENT
% else \@floatpenalty := 0
% LaTeX Error: 'Too many unprocessed floats'
% fi
% fi
% \@currbox :=G \color@vbox
% \normalcolor
% \vbox{
% %% 15 Dec 87 --
% %% removed \boxmaxdepth :=L 0pt
% %% that made box 0 depth because it screwed
% %% things up. Instead, added \vskip0pt at end
% \hsize = \columnwidth
% \@parboxrestore
% \@floatboxreset
% END
%
% \caption ==
% BEGIN
% \refstepcounter{\@captype}
% \@dblarg{\@caption{\@captype}}
% END
%
% In following definition, \par moved from after \addcontentsline to
% before \addcontentsline because the \write could cause
% an extra blank line to be added to the paragraph above the
% caption. (Change made 12 Jun 87)
%
% \@caption{TYPE}[STEXT]{TEXT} ==
% BEGIN
% \par
% \addcontentsline{\ext@TYPE}{TYPE}{\numberline{\theTYPE}{STEXT}}
% \begingroup
% \@parboxrestore
% \@normalsize
% \@makecaption{\fnum@TYPE}{TEXT}
% \par
% \endgroup
% END
%
%
% \@dblfloat{TYPE}[PLACEMENT] : Macro to begin a float environment for
% a double-column float of type TYPE with PLACEMENT as the placement
% specifier. The default value of PLACEMENT is 'tp'
% The environment is ended by \end@dblfloat.
% E.g., \figure* == \@dblfloat{figure},
% \endfigure* == \end@dblfloat.
%
% \@dblfloat{TYPE}[PLACEMENT] ==
% Identical to \@float{TYPE}[PLACEMENT] except \hsize and \linewidth
% are set to \textwidth.
% \end{oldcomments}
%
% \begin{macro}{\@floatpenalty}
% \begin{macrocode}
\newcount\@floatpenalty
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\caption}
%
% This is set to be an error message outside a float since no
% captype is defined there; this may need to be changed by some
% classes.
% \changes{v1.1u}{1999/04/19}
% {Made caption an error outside a float: latex/2815}
% \begin{macrocode}
\def\caption{%
\ifx\@captype\@undefined
\@latex@error{\noexpand\caption outside float}\@ehd
\expandafter\@gobble
\else
\refstepcounter\@captype
\expandafter\@firstofone
\fi
{\@dblarg{\@caption\@captype}}%
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@caption}
% \changes{v1.0b}{1994/03/28}
% {Use \cs{normalsize} not \cs{@normalsize}}
% \changes{v1.1r}{1996/12/06}
% {Call \cs{@setminpage} if needed. latex/2318}
% \begin{macrocode}
\long\def\@caption#1[#2]#3{%
\par
\addcontentsline{\csname ext@#1\endcsname}{#1}%
{\protect\numberline{\csname the#1\endcsname}{\ignorespaces #2}}%
\begingroup
% \end{macrocode}
%
% The paragraph setting parameters are normalised at this point, however
% |\@parboxrestore| resets |\everypar| which is not correct in this
% context so |\@setminipage| is called if needed.
%
% The float mechanism, like minipage, sets the flag |@minipage| true
% before executing the user-supplied text. Many \LaTeX\ constructs
% test for this flag and do not add vertical space when it is true.
% The intention is that this emulates \TeX's `top of page' behaviour.
% The flag must be set false at the start of the first paragraph. This
% is achieved by a redefinition of |\everypar|, but the call to
% |\@parboxrestore| removes that redefinition, so it is re-inserted
% if needed. If the flag is already false then the |\caption| was not
% the first entry in the float, and so some other paragraph has already
% activated the special |\everypar|. In this case no further action is
% needed.
% \begin{macrocode}
\@parboxrestore
\if@minipage
\@setminipage
\fi
% \end{macrocode}
%
% \begin{macrocode}
\normalsize
\@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}\par
\endgroup}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@float}
% \begin{macro}{\@dblflset}
% \changes{v1.1a}{1994/10/31}{Macro added}
% \changes{v1.1g}{1994/12/10}{Macro removed temporarily}
% \changes{v1.1a}{1994/10/31}
% {Major changes to parameter parsing, setting of local variables,
% etc; two-column and one-column cases merged; space hacks moved}
% \changes{v1.1c}{1994/11/05}
% {Add compatibility with old version of \cs{@xfloat}.}
% \changes{v1.1g}{1994/12/10}{Old version reinstated temporarily}
%
% \begin{macrocode}
\def\@float#1{%
\@ifnextchar[%
{\@xfloat{#1}}%
{\edef\reserved@a{\noexpand\@xfloat{#1}[\csname fps@#1\endcsname]}%
\reserved@a}}
% \end{macrocode}
%
% \end{macro}
% \end{macro}
%
% \begin{macro}{\@dblfloat}
% \changes{v1.1a}{1994/10/31}
% {Major changes since two-column and one-column cases merged}
% \changes{v1.1g}{1994/12/10}{Old version reinstated temporarily}
%
% \begin{macrocode}
\def\@dblfloat{%
\if@twocolumn\let\reserved@a\@dbflt\else\let\reserved@a\@float\fi
\reserved@a}
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\fps@dbl}
% \changes{v1.1a}{1994/10/31}{Macro added}
% \changes{v1.1g}{1994/12/10}{Macro removed temporarily}
% Note that all double floats have default fps `tp'.
% \end{macro}
%
% \begin{macro}{\@setfps}
% \changes{v1.1a}{1994/10/31}{Macro added}
% \changes{v1.1c}{1994/11/05}
% {Add compatibility with old version of \cs{@xfloat}.}
% \changes{v1.1g}{1994/12/10}{Macro removed temporarily}
% This sets the fps, dealing with error conditions by adding
% the default.
%
% \end{macro}
%
% \begin{macro}{\@xfloat}
% \changes{LaTeX2e}{1993/12/05}{Command changed}
% \changes{LaTeX2e}{1994/01/21}{Added missing percent characters.}
% \changes{v1.1a}{1994/10/31}
% {Major changes, removing setting of local variables, space hacks
% etc; two-column and one-column cases merged}
% \changes{v1.1c}{1994/11/05}
% {Add compatibility with old version of \cs{@xfloat}: but the
% arguments, provided at exorbitant cost, are now completely
% ignored}
% \changes{v1.1f}{1994/11/21}
% {Missing percents reinserted after 4, 8: these are not numbers.}
% \changes{v1.1g}{1994/12/10}{Old version reinstated temporarily}
% \changes{v1.1g}{1994/12/10}{Sanitization added temporarily}
% The first part of this sets the count register that stores all
% the information about the type and fps of the float.
%
% We assume here that the default specifiers already contain no
% active characters.
%
% It may be better to store the defaults as numbers, rather than
% symbol strings.
%
% \changes{v1.1p}{1996/10/24}{Added \cs{@nodocument} to trap
% floats in the preamble}
% \begin{macrocode}
%</2ekernel>
%<latexrelease>\IncludeInRelease{2015/01/01}%
%<latexrelease> {\@xfloat}{Check float options}%
%<*2ekernel|latexrelease>
\def\@xfloat #1[#2]{%
\@nodocument
\def \@captype {#1}%
\def \@fps {#2}%
\@onelevel@sanitize \@fps
\def \reserved@b {!}%
\ifx \reserved@b \@fps
\@fpsadddefault
\else
\ifx \@fps \@empty
\@fpsadddefault
\fi
\fi
\ifhmode
\@bsphack
\@floatpenalty -\@Mii
\else
\@floatpenalty-\@Miii
\fi
\ifinner
\@parmoderr\@floatpenalty\z@
\else
\@next\@currbox\@freelist
{%
\@tempcnta \sixt@@n
\expandafter \@tfor \expandafter \reserved@a
\expandafter :\expandafter =\@fps
\do
% \end{macrocode}
% \changes{v1.2b}{2015/01/11}{Check for valid option (latexrelease)}
% Start of changes, use a nested if structure, ending in an error.
% \begin{macrocode}
{%
\if \reserved@a h%
\ifodd \@tempcnta
\else
\advance \@tempcnta \@ne
\fi
\else\if \reserved@a t%
\@setfpsbit \tw@
\else\if \reserved@a b%
\@setfpsbit 4%
\else\if \reserved@a p%
\@setfpsbit 8%
\else\if \reserved@a !%
\ifnum \@tempcnta>15
\advance\@tempcnta -\sixt@@n\relax
\fi
\else
\@latex@error{Unknown float option `\reserved@a'}%
{Option `\reserved@a' ignored and `p' used.}%
\@setfpsbit 8%
\fi\fi\fi\fi\fi
}%
% \end{macrocode}
% End of changes
% \begin{macrocode}
\@tempcntb \csname ftype@\@captype \endcsname
\multiply \@tempcntb \@xxxii
\advance \@tempcnta \@tempcntb
\global \count\@currbox \@tempcnta
}%
\@fltovf
\fi
% \end{macrocode}
% The remainder sets up the box in which the float is typeset, and
% the typesetting environment to be used. It is essential to have
% the extra box to avoid the unwanted space that would otherwise
% often be put at the top of the float.
%
% It ends with a hook; not sure how useful this is but it is needed
% at present to deal with double-column floats.
% \task{CAR?}{Sort out hooks}
% \changes{v1.0a}{1994/03/07}
% {(DPC) Extra group for colour}
% \changes{v1.0c}{1994/03/14}
% {(DPC) Use \cs{color@begingroup}}
% \changes{v1.0g}{1994/05/13}
% {(DPC) Use \cs{normalcolor}}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Extra box added to remove colour resetting from vmode}
% \changes{v1.1a}{1994/10/31}{Reset hook added}
% \changes{v1.1c}{1994/11/05}
% {Use new \cs{color@hbox} concept.}
% \changes{v1.1f}{1994/11/21}
% {Changed to \cs{color@vbox} so that large floats overflow
% at the bottom}
% \changes{v1.1f}{1994/11/21}{Use \cs{@setnobreak}}
% \changes{v1.1f}{1994/11/21}{Added \cs{@setminipage}}
% \changes{v1.1f}{1994/11/21}{Added resetting of size and font}
% \changes{v1.1m}{1995/05/25}{(CAR) Resettings moved to hook}
% \begin{macrocode}
\global \setbox\@currbox
\color@vbox
\normalcolor
\vbox \bgroup
\hsize\columnwidth
\@parboxrestore
\@floatboxreset
}%
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\@xfloat}{Check float options}%
%<latexrelease>\def\@xfloat #1[#2]{%
%<latexrelease> \@nodocument
%<latexrelease> \def \@captype {#1}%
%<latexrelease> \def \@fps {#2}%
%<latexrelease> \@onelevel@sanitize \@fps
%<latexrelease> \def \reserved@b {!}%
%<latexrelease> \ifx \reserved@b \@fps
%<latexrelease> \@fpsadddefault
%<latexrelease> \else
%<latexrelease> \ifx \@fps \@empty
%<latexrelease> \@fpsadddefault
%<latexrelease> \fi
%<latexrelease> \fi
%<latexrelease> \ifhmode
%<latexrelease> \@bsphack
%<latexrelease> \@floatpenalty -\@Mii
%<latexrelease> \else
%<latexrelease> \@floatpenalty-\@Miii
%<latexrelease> \fi
%<latexrelease> \ifinner
%<latexrelease> \@parmoderr\@floatpenalty\z@
%<latexrelease> \else
%<latexrelease> \@next\@currbox\@freelist
%<latexrelease> {%
%<latexrelease> \@tempcnta \sixt@@n
%<latexrelease> \expandafter \@tfor \expandafter \reserved@a
%<latexrelease> \expandafter :\expandafter =\@fps
%<latexrelease> \do
%<latexrelease> {%
%<latexrelease> \if \reserved@a h%
%<latexrelease> \ifodd \@tempcnta
%<latexrelease> \else
%<latexrelease> \advance \@tempcnta \@ne
%<latexrelease> \fi
%<latexrelease> \fi
%<latexrelease> \if \reserved@a t%
%<latexrelease> \@setfpsbit \tw@
%<latexrelease> \fi
%<latexrelease> \if \reserved@a b%
%<latexrelease> \@setfpsbit 4%
%<latexrelease> \fi
%<latexrelease> \if \reserved@a p%
%<latexrelease> \@setfpsbit 8%
%<latexrelease> \fi
%<latexrelease> \if \reserved@a !%
%<latexrelease> \ifnum \@tempcnta>15
%<latexrelease> \advance\@tempcnta -\sixt@@n\relax
%<latexrelease> \fi
%<latexrelease> \fi
%<latexrelease> }%
%<latexrelease> \@tempcntb \csname ftype@\@captype \endcsname
%<latexrelease> \multiply \@tempcntb \@xxxii
%<latexrelease> \advance \@tempcnta \@tempcntb
%<latexrelease> \global \count\@currbox \@tempcnta
%<latexrelease> }%
%<latexrelease> \@fltovf
%<latexrelease> \fi
%<latexrelease> \global \setbox\@currbox
%<latexrelease> \color@vbox
%<latexrelease> \normalcolor
%<latexrelease> \vbox \bgroup
%<latexrelease> \hsize\columnwidth
%<latexrelease> \@parboxrestore
%<latexrelease> \@floatboxreset
%<latexrelease>}%
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@floatboxreset}
% \changes{v1.1a}{1994/10/31}{Macro added}
%
% The rational for allowing these normally global flags to be set
% locally here, via |\@parboxrestore|, was stated originally by
% Donald Arseneau and extended by Chris Rowley.
% It is because these flags are only set globally to
% true by section commands, and these should never appear within
% marginals or floats or, indeed, in any group; and they are only ever
% set globally to false when they are definitely true.
%
% If anyone is unhappy with this argument then both flags should be
% treated as in |\set@nobreak|; otherwise this command will be
% redundant.
% \changes{v1.1p}{1996/10/24}
% {Added local settings of flags: dangerous!!}
% \begin{macrocode}
\def \@floatboxreset {%
\reset@font
\normalsize
\@setminipage
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@setnobreak}
% \changes{v1.1f}{1994/11/21}{Macro added}
% \changes{v1.1n}{1996/07/26}{remove unnecessary \cs{global} before
% \cs{@nobreak...}}
% \begin{macrocode}
\def \@setnobreak{%
\if@nobreak
\let\outer@nobreak\@nobreaktrue
\@nobreakfalse
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@setminipage}
% \changes{v1.1f}{1994/11/21}{Macro added}
% \changes{v1.1n}{1996/07/26}{remove unnecessary \cs{global} before
% \cs{@minipage...}}
% \begin{macrocode}
\def \@setminipage{%
\@minipagetrue
\everypar{\@minipagefalse\everypar{}}%
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\end@float}
% \changes{v1.0f}{1994/05/03}
% {(CAR) Added \cs{@largefloatcheck}}
% \changes{v1.1n}{1995/10/25}{(CAR) unify code for double and
% single versions}
% \begin{macrocode}
\def\end@float{%
\@endfloatbox
\ifnum\@floatpenalty <\z@
% \end{macrocode}
% We make sure that we never exceed |\textheight|, otherwise float
% will never get typeset (91/03/15 FMi).
% \begin{macrocode}
\@largefloatcheck
\@cons\@currlist\@currbox
\ifnum\@floatpenalty <-\@Mii
\penalty -\@Miv
% \end{macrocode}
% Saving and restoring |\prevdepth| added 26 May 87 to prevent extra
% vertical space when used in vertical mode.
% \begin{macrocode}
\@tempdima\prevdepth
\vbox{}%
\prevdepth\@tempdima
% \end{macrocode}
%
% \begin{macrocode}
\penalty\@floatpenalty
% \end{macrocode}
% \changes{LaTeX2.09}{1992/03/18}
% {(RmS) changed \cs{@esphack} to \cs{@Esphack}}
% \begin{macrocode}
\else
\vadjust{\penalty -\@Miv \vbox{}\penalty\@floatpenalty}\@Esphack
\fi
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\end@dblfloat}
% \changes{v1.0f}{1994/05/03}{\cs{@largefloatcheck} added}
% \changes{v1.1n}{1995/10/25}{(CAR) unify code for double and
% single versions}
% \changes{v1.2b}{2015/01/11}{float order in 2-column (latexrelease)}
% \begin{macrocode}
%</2ekernel>
%<latexrelease>\IncludeInRelease{2015/01/01}%
%<latexrelease> {\end@dblfloat}{float order in 2-column}%
%<*2ekernel|latexrelease>
\def\end@dblfloat{%
\if@twocolumn
\@endfloatbox
\ifnum\@floatpenalty <\z@
\@largefloatcheck
% \end{macrocode}
%
% Force the depth of two column float boxes.
% \begin{macrocode}
\global\dp\@currbox1sp %
% \end{macrocode}
% What follows is essentially |\end@float| without a starting
% |\@endfloatbox|.
% \changes{v1.2b}{2000/09/24}{FMi: use output routine to
% defer float}
% \changes{v1.2b}{2014/04/27}{Inline the code to allow some
% coexistence with packages that hook into \cs{end@float} and do not
% know about the algorithm change}
% \begin{macrocode}
\@cons\@currlist\@currbox
\ifnum\@floatpenalty <-\@Mii
\penalty -\@Miv
\@tempdima\prevdepth
\vbox{}%
\prevdepth\@tempdima
\penalty\@floatpenalty
\else
\vadjust{\penalty -\@Miv \vbox{}\penalty\@floatpenalty}\@Esphack
\fi
% \end{macrocode}
% \changes{v1.2b}{2014/06/10}{missing \cs{fi} added}
% \begin{macrocode}
\fi
\else
\end@float
\fi
}%
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\end@dblfloat}{float order in 2-column}%
%<latexrelease>\def\end@dblfloat{%
%<latexrelease>\if@twocolumn
%<latexrelease> \@endfloatbox
%<latexrelease> \ifnum\@floatpenalty <\z@
% \end{macrocode}
% We make sure that we never exceed |\textheight|, otherwise float
% will never get typeset (91/03/15 FMi).
% \begin{macrocode}
%<latexrelease> \@largefloatcheck
%<latexrelease> \@cons\@dbldeferlist\@currbox
%<latexrelease> \fi
% \end{macrocode}
% RmS 92/03/18 changed |\@esphack| to |\@Esphack|.
% \begin{macrocode}
%<latexrelease> \ifnum \@floatpenalty =-\@Mii \@Esphack\fi
%<latexrelease>\else
%<latexrelease> \end@float
%<latexrelease>\fi
%<latexrelease>}%
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@endfloatbox}
% \changes{v1.1n}{1995/10/25}{(CAR) macro added: to unify code for
% double and single versions}
% This macro is not intended to be a hook; it is designed to help
% maintain the integrity of this code, which is used twice and, as
% can be seen, is subject to frequent changes.
% \begin{macrocode}
\def \@endfloatbox{%
\par\vskip\z@skip %% \par\vskip\z@ added 15 Dec 87
% \end{macrocode}
% \changes{v1.0a}
% {1994/03/07}{(DPC) Extra group for colour}
% \changes{v1.0c}{1994/03/14}
% {(DPC) Use \cs{color@endgroup}}
% \changes{v1.0h}{1994/05/20}{Restore outer value of @nobreak switch.}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Extra box added to remove colour resetting from vmode}
% \changes{v1.1c}{1994/11/05}
% {Use new \cs{color@hbox} concept.}
% \changes{v1.1f}{1994/11/21}{Corrected position of \cs{outer@nobreak}}
% \changes{v1.1f}{1994/11/21}{Added reset of minipage flag}
% \changes{v1.1n}{1996/07/26}{remove unnecessary \cs{global} before
% \cs{@minipage...}}
% \begin{macrocode}
\@minipagefalse
\outer@nobreak
\egroup %% end of vbox
\color@endbox
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\outer@nobreak}
% \changes{v1.0h}{1994/05/20}{Macro added: default is to do nothing.}
% \begin{macrocode}
\let\outer@nobreak\@empty
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\@largefloatcheck}
% \changes{v1.0e}{1994/04/25}{Command added}
%
% This calculates by how much a float is oversize for the page and
% prints this in a warning message.
%
% \begin{macrocode}
\def \@largefloatcheck{%
\ifdim \ht\@currbox>\textheight
\@tempdima -\textheight
\advance \@tempdima \ht\@currbox
% \end{macrocode}
% \changes{v1.0e}{1994/04/25}{Changed warning message to give more
% info}
% \begin{macrocode}
\@latex@warning {Float too large for page by \the\@tempdima}%
\ht\@currbox \textheight
\fi
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@dbflt}
% \begin{macro}{\@xdblfloat}
% \changes{v1.1a}{1994/10/31}
% {Macros removed: \cs{@dbflt}, \cs{@xdblfloat}}
% \changes{v1.1g}{1994/12/10}{Macros reinserted temporarily}
%
%
% \begin{macrocode}
\def\@dbflt#1{\@ifnextchar[{\@xdblfloat{#1}}{\@xdblfloat{#1}[tp]}}
\def\@xdblfloat#1[#2]{%
\@xfloat{#1}[#2]\hsize\textwidth\linewidth\textwidth}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
%
% Moved to ltoutput 93/12/16
% \begin{macrocode}
%\newcount\c@topnumber
%\newcount\c@dbltopnumber
%\newcount\c@bottomnumber
%\newcount\c@totalnumber
% \end{macrocode}
%
% \begin{macro}{\@floatplacement}
% An analysis of |\@floatplacement|:
%
% This should be called whenever |\@colht| has been set.
% \begin{macrocode}
\def\@floatplacement{\global\@topnum\c@topnumber
% Textpage bit, global:
\global\@toproom \topfraction\@colht
\global\@botnum \c@bottomnumber
\global\@botroom \bottomfraction\@colht
\global\@colnum \c@totalnumber
% Floatpage bit, local:
\@fpmin \floatpagefraction\@colht}
%</2ekernel>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@dblfloatplacement}
% \changes{LaTeX2e}{1993/12/05}{Command changed}
%
% This should be called only within a group. Now changed to
% provide extra checks in |\@addtodblcol|, needed when processing a
% BANG float.
%
% \changes{v1.2b}{2015/01/11}{float order in 2-column (latexrelease)}
% \begin{macrocode}
%<latexrelease>\IncludeInRelease{2015/01/01}%
%<latexrelease> {\@dblfloatplacement}{float order in 2-column}%
%<*2ekernel|latexrelease>
% \end{macrocode}
% When making two column float area, look for floats with 1sp
% depth.
% \begin{macrocode}
\def\@dblfloatplacement{\global\@dbltopnum\c@dbltopnumber
\global\@dbltoproom \dbltopfraction\@colht
\@textmin \@colht
\advance \@textmin -\@dbltoproom
\@fpmin \dblfloatpagefraction\textheight
\@fptop \@dblfptop
\@fpsep \@dblfpsep
\@fpbot \@dblfpbot
% \end{macrocode}
% |\f@depth| is used in |\@testwrongwidth| to look for either
% column or dbl-column floats. A value of |1sp| signals the
% latter. Because of this setting here, |\@dblfloatplacment| needs to
% be called inside a group which is a questionable design.
% \begin{macrocode}
\def\f@depth{1sp}}%
% \end{macrocode}
%
% \begin{macrocode}
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\@dblfloatplacement}{float order in 2-column}%
%<latexrelease>\def \@dblfloatplacement {%
% \end{macrocode}
% Textpage bit: global, but need not be.
% \begin{macrocode}
%<latexrelease> \global \@dbltopnum \c@dbltopnumber
%<latexrelease> \global \@dbltoproom \dbltopfraction\@colht
% \end{macrocode}
% This new bit uses |\@textmin| to locally store the amount of extra
% room in the column.
% \begin{macrocode}
%<latexrelease> \@textmin \@colht
%<latexrelease> \advance \@textmin -\@dbltoproom
% \end{macrocode}
% Floatpage bit: must be local.
% \begin{macrocode}
%<latexrelease> \@fpmin \dblfloatpagefraction\textheight
%<latexrelease> \@fptop \@dblfptop
%<latexrelease> \@fpsep \@dblfpsep
%<latexrelease> \@fpbot \@dblfpbot
%<latexrelease>}%
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
%
% \begin{oldcomments}
% MARGINAL NOTES:
%
% Marginal notes use the same mechanism as floats to communicate
% with the \output routine. Marginal notes are distinguished from
% floats by having a negative placement specification. The command
% \marginpar [LTEXT]{RTEXT} generates a marginal note in a parbox,
% using LTEXT if it's on the left and RTEXT if it's on the right.
% (Default is RTEXT = LTEXT.) It uses the following parameters.
%
% \marginparwidth : Width of marginal notes.
% \marginparsep : Distance between marginal note and text.
% the page layout to determine how to move the marginal
% note into the margin. E.g., \@leftmarginskip ==
% \hskip -\marginparwidth \hskip -\marginparsep .
% \marginparpush : Minimum vertical separation between \marginpar's
%
% Marginal notes are normally put on the outside of the page
% if @mparswitch = true, and on the right if @mparswitch = false.
% The command \reversemarginpar reverses the side where they
% are put. \normalmarginpar undoes \reversemarginpar.
% These commands have no effect for two-column output.
%
% SURPRISE: if two marginal notes appear on the same line of
% text, then the second one could appear on the next page, in
% a funny position.
%
%
% \marginpar [LTEXT]{RTEXT} ==
% BEGIN
% if hmode then \@bsphack
% \@floatpenalty := -10002
% else \@floatpenalty := -10003
% fi
% if inner
% then LaTeX Error: 'Not in outer paragraph mode.'
% \@floatpenalty := 0
% else if \@freelist has two elements:
% then get \@marbox, \@currbox from \@freelist
% \count\@marbox :=G -1
% else \@floatpenalty := 0
% LaTeX Error: 'Too many unprocessed floats'
% \@currbox, \@marbox := \@tempboxa %%use \def
% fi
% fi
% if optional argument
% then %% \@xmpar ==
% \@savemarbox\@marbox{LTEXT}
% \@savemarbox\@currbox{RTEXT}
% else %% \@ympar ==
% \@savemarbox\@marbox{RTEXT}
% \box\@currbox :=G \box\@marbox
% fi
% \@xympar
% END
%
% \reversemarginpar == BEGIN \@mparbottom :=G 0
% @reversemargin :=G true
% END
%
% \normalmarginpar == BEGIN \@mparbottom :=G 0
% @reversemargin :=G false
% END
%
% \end{oldcomments}
%
% \begin{macro}{\marginpar}
% \begin{macrocode}
\def\marginpar{%
\ifhmode
\@bsphack
\@floatpenalty -\@Mii
\else
\@floatpenalty-\@Miii
\fi
\ifinner
\@parmoderr
\@floatpenalty\z@
\else
\@next\@currbox\@freelist{}{}%
\@next\@marbox\@freelist{\global\count\@marbox\m@ne}%
{\@floatpenalty\z@
\@fltovf\def\@currbox{\@tempboxa}\def\@marbox{\@tempboxa}}%
\fi
\@ifnextchar [\@xmpar\@ympar}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@xmpar}
% \begin{macrocode}
\long\def\@xmpar[#1]#2{%
\@savemarbox\@marbox{#1}%
\@savemarbox\@currbox{#2}%
\@xympar}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@ympar}
% \begin{macrocode}
\long\def\@ympar#1{%
\@savemarbox\@marbox{#1}%
\global\setbox\@currbox\copy\@marbox
\@xympar}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@savemarbox}
% \changes{v1.0b}{1994/03/12}
% {(DPC) Extra group for colour}
% \changes{v1.0c}{1994/03/14}
% {(DPC) Use \cs{color@begingroup}}
% \changes{v1.0d}{1994/04/18}
% {(DPC) Remove Colour support}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Extra box added for colour}
% \changes{v1.1c}{1994/11/05}
% {Use new \cs{color@hbox} concept.}
% \changes{v1.1f}{1994/11/21}{Changed to \cs{color@vbox} }
% \changes{v1.1f}{1994/11/21}{Use \cs{@setnobreak} etc}
% \changes{v1.1f}{1994/11/21}{Added \cs{@setminipage} etc}
% \changes{v1.1f}{1994/11/21}{Added resetting of size and font}
% \changes{v1.1m}{1995/05/25}{(CAR) Resettings moved to hook}
% \changes{v1.1n}{1996/07/26}{remove unnecessary \cs{global} before
% \cs{@minipage...}}
% \changes{v1.2e}{2021/02/03}{Explicitly end with \cs{par} (gh/489)}
% \begin{macrocode}
%</2ekernel>
%<*2ekernel|latexrelease>
%<latexrelease>\IncludeInRelease{2021/06/01}%
%<latexrelease> {\@savemarbox}{Explicit par for marginpar}%
\long\def \@savemarbox #1#2{%
\global\setbox #1%
\color@vbox
\vtop{%
\hsize\marginparwidth
\@parboxrestore
\@marginparreset
#2\par
\@minipagefalse
\outer@nobreak
}%
\color@endbox
}
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
% \end{macrocode}
%
% \begin{macrocode}
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\@savemarbox}{Explicit par for marginpar}%
%<latexrelease>
%<latexrelease>\long\def \@savemarbox #1#2{%
%<latexrelease> \global\setbox #1%
%<latexrelease> \color@vbox
%<latexrelease> \vtop{%
%<latexrelease> \hsize\marginparwidth
%<latexrelease> \@parboxrestore
%<latexrelease> \@marginparreset
%<latexrelease> #2%
%<latexrelease> \@minipagefalse
%<latexrelease> \outer@nobreak
%<latexrelease> }%
%<latexrelease> \color@endbox
%<latexrelease>}
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@marginparreset}
% \changes{v1.1f}{1994/11/21}{Macro added}
%
% The rational for allowing these normally global flags to be set
% locally here, via |\@parboxrestore| was stated originally by
% Donald Arseneau and extended by Chris Rowley.
% It is because these flags are only set globally to
% true by section commands, and these should never appear within
% marginals or floats or, indeed, in any group; and they are only ever
% set globally to false when they are definitely true.
%
% If anyone is unhappy with this argument then both flags should be
% treated as in |\set@nobreak|; otherwise this command will be
% redundant.
% \changes{v1.1p}{1996/10/24}
% {Added local settings of flags: dangerous!!}
% \begin{macrocode}
\def \@marginparreset {%
\reset@font
\normalsize
% \let\if@nobreak\iffalse
% \let\if@noskipsec\iffalse
% \@setnobreak
\@setminipage
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@xympar}
% \begin{macrocode}
% \end{macrocode}
% \changes{LaTeX2.09}{1992/03/18}
% {(RmS) added \cs{global}\cs{@ignorefalse}}
% \changes{v1.0b}{1994/03/12}
% {(DPC) Extra bgroup for colour}
% \changes{1.0c}{1994/03/14}
% {(DPC) Use \cs{color@begingroup}}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Extra box added since needed for floats}
% \changes{v1.1c}{1994/11/05}
% {Use new \cs{color@hbox} concept.}
% \changes{v1.1f}{1994/11/21}{Changed to \cs{color@vbox} }
% Setting the box here is done only because the code
% uses \cs{end@float}; it will be empty and gets discarded.
% \changes{v1.1o}{1996/08/02}{Remove \cs{global} before \cs{@ignore...}}
% \begin{macrocode}
\def \@xympar{%
\ifnum\@floatpenalty <\z@\@cons\@currlist\@marbox\fi
\setbox\@tempboxa
\color@vbox
\vbox \bgroup
\end@float
\@ignorefalse
\@esphack
}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\reversemarginpar}
% \begin{macro}{\normalmarginpar}
% \begin{macrocode}
\def\reversemarginpar{\global\@mparbottom\z@ \@reversemargintrue}
\def\normalmarginpar{\global\@mparbottom\z@ \@reversemarginfalse}
% \end{macrocode}
% \end{macro}
% \end{macro}
%
% \begin{macrocode}
\message{footnotes,}
% \end{macrocode}
%
% \subsection{Footnotes}
%
% \begin{oldcomments}
%
% \footnote{NOTE} : User command to insert a footnote.
%
% \footnote[NUM]{NOTE}: User command to insert a footnote numbered
% NUM, where NUM is a number -- 1, 2,
% etc. For example, if footnotes are numbered
% *, **, etc. within pages, then \footnote[2]{...}
% produces footnote '**'. This command does not
% step the footnote counter.
%
% \footnotemark[NUM] : Command to produce just the footnote mark in
% the text, but no footnote. With no argument,
% it steps the footnote counter before generating
% the mark.
%
% \footnotetext[NUM]{TEXT} : Command to produce the footnote but
% no mark. \footnote is equivalent to
% \footnotemark \footnotetext .
%
% As in PLAIN, footnotes use \insert\footins, and the following
% parameters:
%
% \footnotesize : Size-changing command for footnotes.
%
% \footnotesep : The height of a strut placed at the beginning of
% every footnote.
% \skip\footins : Space between main text and footnotes. The rule
% separating footnotes from text occurs in this
% space. This space lies above the strut of height
% \footnotesep which is at the beginning of the
% first footnote.
% \footnoterule : Macro to draw the rule separating footnotes from
% text. It is executed right after a \vspace of
% \skip\footins. It should take zero vertical
% space--i.e., it should to a negative skip to
% compensate for any positive space it occupies.
% (See PLAIN.TEX.)
%
% \interfootnotelinepenalty : Interline penalty for footnotes.
%
% \thefootnote : In usual LaTeX style, produces the footnote number.
% If footnotes are to be numbered within pages, then
% the document style file must include an \@addtoreset
% command to cause the footnote counter to be reset
% when the page counter is stepped. This is not a good
% idea, though, because the counter will not always be
% reset in time to ensure that the first footnote on a
% page is footnote number one.
%
% \@thefnmark : Holds the current footnote's mark--e.g., \dag or '1'
% or 'a'.
%
% \@mpfnnumber : A macro that generates the numbers for \footnote
% and \footnotemark commands. It == \thefootnote
% outside a minipage environment, but can be
% changed inside to generate numbers for
% \footnote's.
%
% \@makefnmark : A macro to generate the footnote marker from
% \@thefnmark The default definition was
% \hbox{$^\@thefnmark$}.
%
% This is now replaced by
% \textsuperscript{\@thefnmark}
%
% \@makefntext{NOTE} :
% Must produce the actual footnote, using \@thefnmark as the mark
% of the footnote and NOTE as the text. It is called when
% effectively inside a \parbox, with \hsize = \columnwidth.
% For example, it might be as simple as
% $^{\@thefnmark}$ NOTE
%
% In a minipage environment, \footnote and \footnotetext are redefined
% so that
% (a) they use the counter mpfootnote
% (b) the footnotes they produce go at the bottom of the minipage.
% The switch is accomplished by letting \@mpfn == footnote or mpfootnote
% and \thempfn == \thefootnote or \thempfootnote, and by redefining
% \@footnotetext to be \@mpfootnotetext in the minipage.
%
% \footnote{NOTE} ==
% BEGIN
% \stepcounter{\@mpfn}
% begingroup
% \protect == \noexpand
% \@thefnmark :=G eval (\thempfn)
% endgroup
% \@footnotemark
% \@footnotetext{NOTE}
% END
%
% \footnote[NUM]{NOTE} ==
% BEGIN
% begingroup
% \protect == \noexpand
% counter \@mpfn :=L NUM
% \@thefnmark :=G eval (\thempfn)
% endgroup
% \@footnotemark
% \@footnotetext{NOTE}
% END
%
% \footnotemark ==
% BEGIN \stepcounter{footnote}
% begingroup
% \protect == \noexpand
% \@thefnmark :=G eval(\thefootnote)
% endgroup
% \@footnotemark
% END
%
% \footnotemark[NUM] ==
% BEGIN
% begingroup
% footnote counter :=L NUM
% \protect == \noexpand
% \@thefnmark :=G eval(\thefootnote)
% endgroup
% \@footnotemark
% END
%
% \@footnotemark ==
% BEGIN
% \leavevmode
% IF hmode THEN \@x@sf := \the\spacefactor FI
% \@makefnmark % put number in main text
% IF hmode THEN \spacefactor := \@x@sf FI
% END
%
% \footnotetext ==
% BEGIN begingroup \protect == \noexpand
% \@thefnmark :=G eval (\thempfn)
% endgroup
% \@footnotetext
% END
%
% \footnotetext[NUM] ==
% BEGIN begingroup counter \@mpfn :=L NUM
% \protect == \noexpand
% \@thefnmark :=G eval (\thempfn)
% endgroup
% \@footnotetext
% END
%
% \end{oldcomments}
%
%
% \changes{v1.1l}{1995/05/24}{Moved definition of \cs{footins}
% and \cs{footnoterule} from ltplain.}
%
% \begin{macro}{\footins}
% \LaTeX\ does use the same insert for footnotes as PLAIN.
% \begin{macrocode}
\newinsert\footins
% \end{macrocode}
%
% \LaTeX\ leaves these initializations for the |\footins| insert.
%
% \begin{macrocode}
\skip\footins=\bigskipamount % space added when footnote is present
\count\footins=1000 % footnote magnification factor (1 to 1)
\dimen\footins=8in % maximum footnotes per page
% \end{macrocode}
% \end{macro}
%
%
% \begin{macro}{\footnoterule}
% \LaTeX\ keeps PLAIN \TeX's |\footnoterule| as the default.
%
% \begin{macrocode}
\def\footnoterule{\kern-3\p@
\hrule \@width 2in \kern 2.6\p@} % the \hrule is .4pt high
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\thefootnote}
% \changes{v1.1i}{1995/05/16}{Streamlined parts of code.}
% \begin{macrocode}
\@definecounter{footnote}
\def\thefootnote{\@arabic\c@footnote}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\thempfootnote}
% \changes{v1.1j}{1995/05/18}{Added \cs{itshape}.}
% \changes{v1.1v}{2002/10/01}{Use braces around \cs{itshape}
% to keep font change local (pr/3460).}
% The default display for the footnote counter in minipages is to
% use italic letters. We use |\itshape| not |\textit| as the latter
% would add an italic correction.
% \begin{macrocode}
\@definecounter{mpfootnote}
\def\thempfootnote{{\itshape\@alph\c@mpfootnote}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@makefnmark}
% \changes{v1.1i}{1995/05/16}{Now use \cs{textsuperscript}.}
% \changes{v1.1j}{1995/05/18}{Added \cs{normalfont}.}
% \changes{v1.1k}{1995/05/20}{Moved \cs{normalfont} to
% \cs{textsuperscript}}
% \changes{v1.1k}{1995/05/20}{Moved \cs{normalfont} back
% and use \cs{@textsuperscript}}
% Default definition.
% \begin{macrocode}
%\def\@makefnmark{\hbox{$^{\@thefnmark}\m@th$}}
\def\@makefnmark{\hbox{\@textsuperscript{\normalfont\@thefnmark}}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\textsuperscript}
% \changes{v1.1i}{1995/05/16}{Command added./pr1503}
% \changes{v1.1k}{1995/05/20}{Use \cs{normalfont}.}
% \changes{v1.1l}{1995/05/24}{Use \cs{@textsuperscript}}
% This command provides superscript characters in the current text
% font. It's implementation might change!!!
% \begin{macrocode}
\DeclareRobustCommand*\textsuperscript[1]{%
\@textsuperscript{\selectfont#1}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@textsuperscript}
% \changes{v1.1l}{1995/05/24}{Command added.}
% \changes{v1.1n}{1995/12/05}{Use \cs{ensuremath} for latex/1984.}
% \changes{v1.1m}{1995/12/07}
% {Move \cs{m@th} out of the \cs{ensuremath} for latex/1984.}
% This command should not be used directly, but may be used to define
% other commands |\textsuperscript|, |\@makefnmark|. |#1| should
% always start with a font selection command, to activate the font
% size switch.
% \begin{macrocode}
%</2ekernel>
%<*2ekernel|latexrelease>
%<latexrelease>\IncludeInRelease{2020/10/01}%
%<latexrelease> {\@textsuperscript}{superscript baseline}%
\def\@textsuperscript#1{%
{\m@th\ensuremath{^{\mbox{\fontsize\sf@size\sf@size#1}}}}}
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
% \end{macrocode}
%
% \begin{macrocode}
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\@textsuperscript}{superscript baseline}%
%<latexrelease>
%<latexrelease>\def\@textsuperscript#1{%
%<latexrelease> {\m@th\ensuremath{^{\mbox{\fontsize\sf@size\z@#1}}}}}
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
%
%
%
%
%
%
% \begin{macro}{\textsubscript}
% \changes{v1.2a}{2014/12/30}{Command added (latexrelease)}
% \changes{v1.2d}{2020/04/09}{Set non-zero baseline (gh/249)}
% \begin{macrocode}
%</2ekernel>
%<latexrelease>\IncludeInRelease{2015/01/01}%
%<latexrelease> {\textsubscript}{\textsubscript}%
%<*2ekernel|latexrelease>
% \end{macrocode}
%
% \begin{macrocode}
\DeclareRobustCommand*\textsubscript[1]{%
\@textsubscript{\selectfont#1}}%
% \end{macrocode}
%
% \begin{macrocode}
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\textsubscript}{\textsubscript}%
%<latexrelease>\let\textsubscript\@undefined
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
%
%
%
% \begin{macro}{\@textsubscript}
% \changes{v1.2a}{2014/12/30}{Command added (latexrelease)}
% \changes{v1.2d}{2020/04/09}{Set non-zero baseline (gh/249)}
% \begin{macrocode}
%</2ekernel>
%<*2ekernel|latexrelease>
%<latexrelease>\IncludeInRelease{2020/10/01}%
%<latexrelease> {\@textsubscript}{subscript baseline}%
\def\@textsubscript#1{%
{\m@th\ensuremath{_{\mbox{\fontsize\sf@size\sf@size#1}}}}}
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
% \end{macrocode}
%
% \begin{macrocode}
%<latexrelease>\IncludeInRelease{2015/01/01}%
%<latexrelease> {\@textsubscript}{subscript baseline}%
%<latexrelease>
%<latexrelease>\def\@textsubscript#1{%
%<latexrelease> {\m@th\ensuremath{_{\mbox{\fontsize\sf@size\z@#1}}}}}
% \end{macrocode}
%
% \begin{macrocode}
%<latexrelease>\EndIncludeInRelease
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\@textsubscript}{subscript baseline}%
%<latexrelease>\let\@textsubscript\@undefined
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
%
%
% \begin{macro}{\footnotesep}
% \begin{macrocode}
\newdimen\footnotesep
% \end{macrocode}
%
% \end{macro}
%
% \begin{macro}{\footnote}
% \changes{LaTeX2.09}{1991/11/01}
% {(RmS) Added \cs{let}\cs{protect}\cs{noexpand} in
% \cs{footnote}, \cs{footnotemark},
% and \cs{footnotetext}, since \cs{xdef} is used}
% \changes{LaTeX2.09}{1991/11/22}
% {(RmS) Added \cs{let}\cs{protect}\cs{noexpand} in
% \cs{@xfootnote}, \cs{@xfootnotemark},
% and \cs{@xfootnotetext}}
% \changes{LaTeX2.09}{1992/11/26}
% {(RmS) Changed all to
% `def`protect\string{`noexpand`protect`noexpand\string}}
% \changes{v1.1b}{1994/11/26}
% {(ASAJ) Added \cs{protected@xdef}.}
%
% \begin{macrocode}
\def\footnote{\@ifnextchar[\@xfootnote{\stepcounter\@mpfn
\protected@xdef\@thefnmark{\thempfn}%
\@footnotemark\@footnotetext}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@xfootnote}
% \begin{macrocode}
\def\@xfootnote[#1]{%
\begingroup
\csname c@\@mpfn\endcsname #1\relax
\unrestored@protected@xdef\@thefnmark{\thempfn}%
\endgroup
\@footnotemark\@footnotetext}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@footnotetext}
% \changes{LaTeX2.09}{1991/09/29}
% {(RmS) added \cs{reset@font}}
% \changes{LaTeX2.09}{1992/11/26}
% {(RmS) added protection for \cs{edef}}
% \changes{v1.0a}{1994/03/07}
% {(DPC) Extra group for colour}
% \changes{v1.0c}{1994/03/14}
% {(DPC) Use \cs{color@begingroup}, add \cs{endgraf}}
% \changes{v1.0d}{1994/04/18}
% {(DPC) Remove Colour support}
% \changes{v1.0g}{1994/05/13}
% {(DPC) Add new style colour support: \cs{normalcolor}}
% \changes{v1.0g}{1994/05/13}
% {(DPC) Use \cs{@finalstrut}}
% \changes{v1.1a}{1994/10/31}
% {(DPC/CAR) Move colour setting to output routine}
% \changes{v1.1b}{1994/11/04}
% {(ASAJ) Added \cs{protected@edef}.}
% \changes{v1.1c}{1994/11/05}
% {Removed \cs{normalcolor} (again)}
% \changes{v1.1t}{1997/11/19}
% {Missing percent, again}
% \changes{v1.2e}{2021/02/10}{Explicitly run \cs{par} at the end of footnote text
% in preparation for paragraph hooks}
% \changes{v1.2g}{2021/10/14}
% {Explicitly set \cs{@currentcounter} (gh/687)}
% \begin{macrocode}
%</2ekernel>
%<*2ekernel|latexrelease>
%<latexrelease>\IncludeInRelease{2021/11/15}%
%<latexrelease> {\@footnotetext}{footnotetext tagging}%
\long\def\@footnotetext#1{\insert\footins{%
\reset@font\footnotesize
\interlinepenalty\interfootnotelinepenalty
\splittopskip\footnotesep
\splitmaxdepth \dp\strutbox \floatingpenalty \@MM
\hsize\columnwidth \@parboxrestore
\def\@currentcounter{footnote}%
\protected@edef\@currentlabel{%
\csname p@footnote\endcsname\@thefnmark
}%
\color@begingroup
\@makefntext{%
\rule\z@\footnotesep\ignorespaces#1\@finalstrut\strutbox}%
\par
\color@endgroup}}%
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
% \end{macrocode}
%
% \begin{macrocode}
%<latexrelease>\IncludeInRelease{2021/06/01}%
%<latexrelease> {\@footnotetext}{footnotetext tagging}%
%<latexrelease>\long\def\@footnotetext#1{\insert\footins{%
%<latexrelease> \reset@font\footnotesize
%<latexrelease> \interlinepenalty\interfootnotelinepenalty
%<latexrelease> \splittopskip\footnotesep
%<latexrelease> \splitmaxdepth \dp\strutbox \floatingpenalty \@MM
%<latexrelease> \hsize\columnwidth \@parboxrestore
%<latexrelease> \protected@edef\@currentlabel{%
%<latexrelease> \csname p@footnote\endcsname\@thefnmark
%<latexrelease> }%
%<latexrelease> \color@begingroup
%<latexrelease> \@makefntext{%
%<latexrelease> \rule\z@\footnotesep\ignorespaces#1\@finalstrut\strutbox}%
%<latexrelease> \par
%<latexrelease> \color@endgroup}}%
%<latexrelease>\EndIncludeInRelease
% \end{macrocode}
%
% \begin{macrocode}
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\@footnotetext}{footnotetext tagging}%
%<latexrelease>
%<latexrelease>\long\def\@footnotetext#1{\insert\footins{%
%<latexrelease> \reset@font\footnotesize
%<latexrelease> \interlinepenalty\interfootnotelinepenalty
%<latexrelease> \splittopskip\footnotesep
%<latexrelease> \splitmaxdepth \dp\strutbox \floatingpenalty \@MM
%<latexrelease> \hsize\columnwidth \@parboxrestore
%<latexrelease> \protected@edef\@currentlabel{%
%<latexrelease> \csname p@footnote\endcsname\@thefnmark
%<latexrelease> }%
%<latexrelease> \color@begingroup
%<latexrelease> \@makefntext{%
%<latexrelease> \rule\z@\footnotesep\ignorespaces#1\@finalstrut\strutbox}%
%<latexrelease> \color@endgroup}}%
%<latexrelease>
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\footnotemark}
% \changes{v1.1b}{1994/11/04}{Added \cs{protected@xdef} to
% \cs{footnotemark}.}
% \begin{macrocode}
\def\footnotemark{%
\@ifnextchar[\@xfootnotemark
{\stepcounter{footnote}%
\protected@xdef\@thefnmark{\thefootnote}%
\@footnotemark}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@xfootnotemark}
% \begin{macrocode}
\def\@xfootnotemark[#1]{%
\begingroup
\c@footnote #1\relax
\unrestored@protected@xdef\@thefnmark{\thefootnote}%
\endgroup
\@footnotemark}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@footnotemark}
% \changes{v1.1h}{1995/05/12}
% {Add \cs{nobreak} to allow hyphenation. latex/1605}
% \begin{macrocode}
\def\@footnotemark{%
\leavevmode
\ifhmode\edef\@x@sf{\the\spacefactor}\nobreak\fi
\@makefnmark
\ifhmode\spacefactor\@x@sf\fi
\relax}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\footnotetext}
% \begin{macrocode}
\def\footnotetext{%
\@ifnextchar [\@xfootnotenext
{\protected@xdef\@thefnmark{\thempfn}%
\@footnotetext}}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@xfootnotenext}
% \begin{macrocode}
\def\@xfootnotenext[#1]{%
\begingroup
\csname c@\@mpfn\endcsname #1\relax
\unrestored@protected@xdef\@thefnmark{\thempfn}%
\endgroup
\@footnotetext}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\thempfn}
% \begin{macro}{\@mpfn}
% \begin{macrocode}
\def\@mpfn{footnote}
\def\thempfn{\thefootnote}
% \end{macrocode}
%
% \end{macro}
% \end{macro}
%
%
%
%
% \begin{macro}{\footref}
% This command generates a footnote mark. The value is produced by
% referencing a \cs{label} placed into a \cs{footnote} elsewhere
% (can be one in the main galley or in a minipage).
% \changes{v1.2f}{2021/02/16}{\cs{footref} added}
% \begin{macrocode}
%</2ekernel>
%<*2ekernel|latexrelease>
%<latexrelease>\IncludeInRelease{2021/06/01}%
%<latexrelease> {\footref}{Add footref}%
\def\footref#1{%
\begingroup
\unrestored@protected@xdef\@thefnmark{\ref{#1}}%
\endgroup
\@footnotemark
}
%</2ekernel|latexrelease>
%<latexrelease>\EndIncludeInRelease
% \end{macrocode}
% We don't remove it when rolling back so that packages offered it
% in the past do not need to alter their behavior in a rollback
% situation.
% \begin{macrocode}
%<latexrelease>\IncludeInRelease{0000/00/00}%
%<latexrelease> {\footref}{Add footref}%
%<latexrelease>
%<latexrelease> % \let\footref\@undefined
%<latexrelease>
%<latexrelease>\EndIncludeInRelease
%<*2ekernel>
% \end{macrocode}
% \end{macro}
%
%
% \begin{macrocode}
%</2ekernel>
% \end{macrocode}
%
% \Finale
%