https://github.com/python/cpython
Tip revision: 4336222407f4aab5944b8c90a08d9cf644db7aa2 authored by Łukasz Langa on 29 July 2019, 13:26:01 UTC
Python 3.8.0b3
Python 3.8.0b3
Tip revision: 4336222
_ssl.c
/* SSL socket module
SSL support based on patches by Brian E Gallew and Laszlo Kovacs.
Re-worked a bit by Bill Janssen to add server-side support and
certificate decoding. Chris Stawarz contributed some non-blocking
patches.
This module is imported by ssl.py. It should *not* be used
directly.
XXX should partial writes be enabled, SSL_MODE_ENABLE_PARTIAL_WRITE?
XXX integrate several "shutdown modes" as suggested in
http://bugs.python.org/issue8108#msg102867 ?
*/
#define PY_SSIZE_T_CLEAN
#include "Python.h"
#include "pythread.h"
/* Redefined below for Windows debug builds after important #includes */
#define _PySSL_FIX_ERRNO
#define PySSL_BEGIN_ALLOW_THREADS_S(save) \
do { if (_ssl_locks_count>0) { (save) = PyEval_SaveThread(); } } while (0)
#define PySSL_END_ALLOW_THREADS_S(save) \
do { if (_ssl_locks_count>0) { PyEval_RestoreThread(save); } _PySSL_FIX_ERRNO; } while (0)
#define PySSL_BEGIN_ALLOW_THREADS { \
PyThreadState *_save = NULL; \
PySSL_BEGIN_ALLOW_THREADS_S(_save);
#define PySSL_BLOCK_THREADS PySSL_END_ALLOW_THREADS_S(_save);
#define PySSL_UNBLOCK_THREADS PySSL_BEGIN_ALLOW_THREADS_S(_save);
#define PySSL_END_ALLOW_THREADS PySSL_END_ALLOW_THREADS_S(_save); }
/* Include symbols from _socket module */
#include "socketmodule.h"
static PySocketModule_APIObject PySocketModule;
#if defined(HAVE_POLL_H)
#include <poll.h>
#elif defined(HAVE_SYS_POLL_H)
#include <sys/poll.h>
#endif
/* Don't warn about deprecated functions */
#ifdef __GNUC__
#pragma GCC diagnostic ignored "-Wdeprecated-declarations"
#endif
#ifdef __clang__
#pragma clang diagnostic ignored "-Wdeprecated-declarations"
#endif
/* Include OpenSSL header files */
#include "openssl/rsa.h"
#include "openssl/crypto.h"
#include "openssl/x509.h"
#include "openssl/x509v3.h"
#include "openssl/pem.h"
#include "openssl/ssl.h"
#include "openssl/err.h"
#include "openssl/rand.h"
#include "openssl/bio.h"
#include "openssl/dh.h"
#ifndef HAVE_X509_VERIFY_PARAM_SET1_HOST
# ifdef LIBRESSL_VERSION_NUMBER
# error "LibreSSL is missing X509_VERIFY_PARAM_set1_host(), see https://github.com/libressl-portable/portable/issues/381"
# elif OPENSSL_VERSION_NUMBER > 0x1000200fL
# define HAVE_X509_VERIFY_PARAM_SET1_HOST
# else
# error "libssl is too old and does not support X509_VERIFY_PARAM_set1_host()"
# endif
#endif
/* SSL error object */
static PyObject *PySSLErrorObject;
static PyObject *PySSLCertVerificationErrorObject;
static PyObject *PySSLZeroReturnErrorObject;
static PyObject *PySSLWantReadErrorObject;
static PyObject *PySSLWantWriteErrorObject;
static PyObject *PySSLSyscallErrorObject;
static PyObject *PySSLEOFErrorObject;
/* Error mappings */
static PyObject *err_codes_to_names;
static PyObject *err_names_to_codes;
static PyObject *lib_codes_to_names;
struct py_ssl_error_code {
const char *mnemonic;
int library, reason;
};
struct py_ssl_library_code {
const char *library;
int code;
};
#if defined(MS_WINDOWS) && defined(Py_DEBUG)
/* Debug builds on Windows rely on getting errno directly from OpenSSL.
* However, because it uses a different CRT, we need to transfer the
* value of errno from OpenSSL into our debug CRT.
*
* Don't be fooled - this is horribly ugly code. The only reasonable
* alternative is to do both debug and release builds of OpenSSL, which
* requires much uglier code to transform their automatically generated
* makefile. This is the lesser of all the evils.
*/
static void _PySSLFixErrno(void) {
HMODULE ucrtbase = GetModuleHandleW(L"ucrtbase.dll");
if (!ucrtbase) {
/* If ucrtbase.dll is not loaded but the SSL DLLs are, we likely
* have a catastrophic failure, but this function is not the
* place to raise it. */
return;
}
typedef int *(__stdcall *errno_func)(void);
errno_func ssl_errno = (errno_func)GetProcAddress(ucrtbase, "_errno");
if (ssl_errno) {
errno = *ssl_errno();
*ssl_errno() = 0;
} else {
errno = ENOTRECOVERABLE;
}
}
#undef _PySSL_FIX_ERRNO
#define _PySSL_FIX_ERRNO _PySSLFixErrno()
#endif
/* Include generated data (error codes) */
#include "_ssl_data.h"
#if (OPENSSL_VERSION_NUMBER >= 0x10100000L) && !defined(LIBRESSL_VERSION_NUMBER)
# define OPENSSL_VERSION_1_1 1
# define PY_OPENSSL_1_1_API 1
#endif
/* LibreSSL 2.7.0 provides necessary OpenSSL 1.1.0 APIs */
#if defined(LIBRESSL_VERSION_NUMBER) && LIBRESSL_VERSION_NUMBER >= 0x2070000fL
# define PY_OPENSSL_1_1_API 1
#endif
/* Openssl comes with TLSv1.1 and TLSv1.2 between 1.0.0h and 1.0.1
http://www.openssl.org/news/changelog.html
*/
#if OPENSSL_VERSION_NUMBER >= 0x10001000L
# define HAVE_TLSv1_2 1
#else
# define HAVE_TLSv1_2 0
#endif
/* SNI support (client- and server-side) appeared in OpenSSL 1.0.0 and 0.9.8f
* This includes the SSL_set_SSL_CTX() function.
*/
#ifdef SSL_CTRL_SET_TLSEXT_HOSTNAME
# define HAVE_SNI 1
#else
# define HAVE_SNI 0
#endif
#ifdef TLSEXT_TYPE_application_layer_protocol_negotiation
# define HAVE_ALPN 1
#else
# define HAVE_ALPN 0
#endif
/* We cannot rely on OPENSSL_NO_NEXTPROTONEG because LibreSSL 2.6.1 dropped
* NPN support but did not set OPENSSL_NO_NEXTPROTONEG for compatibility
* reasons. The check for TLSEXT_TYPE_next_proto_neg works with
* OpenSSL 1.0.1+ and LibreSSL.
* OpenSSL 1.1.1-pre1 dropped NPN but still has TLSEXT_TYPE_next_proto_neg.
*/
#ifdef OPENSSL_NO_NEXTPROTONEG
# define HAVE_NPN 0
#elif (OPENSSL_VERSION_NUMBER >= 0x10101000L) && !defined(LIBRESSL_VERSION_NUMBER)
# define HAVE_NPN 0
#elif defined(TLSEXT_TYPE_next_proto_neg)
# define HAVE_NPN 1
#else
# define HAVE_NPN 0
#endif
#if (OPENSSL_VERSION_NUMBER >= 0x10101000L) && !defined(LIBRESSL_VERSION_NUMBER)
#define HAVE_OPENSSL_KEYLOG 1
#endif
#ifndef INVALID_SOCKET /* MS defines this */
#define INVALID_SOCKET (-1)
#endif
/* OpenSSL 1.0.2 and LibreSSL needs extra code for locking */
#ifndef OPENSSL_VERSION_1_1
#define HAVE_OPENSSL_CRYPTO_LOCK
#endif
#if defined(OPENSSL_VERSION_1_1) && !defined(OPENSSL_NO_SSL2)
#define OPENSSL_NO_SSL2
#endif
#ifndef PY_OPENSSL_1_1_API
/* OpenSSL 1.1 API shims for OpenSSL < 1.1.0 and LibreSSL < 2.7.0 */
#define TLS_method SSLv23_method
#define TLS_client_method SSLv23_client_method
#define TLS_server_method SSLv23_server_method
static int X509_NAME_ENTRY_set(const X509_NAME_ENTRY *ne)
{
return ne->set;
}
#ifndef OPENSSL_NO_COMP
/* LCOV_EXCL_START */
static int COMP_get_type(const COMP_METHOD *meth)
{
return meth->type;
}
/* LCOV_EXCL_STOP */
#endif
static pem_password_cb *SSL_CTX_get_default_passwd_cb(SSL_CTX *ctx)
{
return ctx->default_passwd_callback;
}
static void *SSL_CTX_get_default_passwd_cb_userdata(SSL_CTX *ctx)
{
return ctx->default_passwd_callback_userdata;
}
static int X509_OBJECT_get_type(X509_OBJECT *x)
{
return x->type;
}
static X509 *X509_OBJECT_get0_X509(X509_OBJECT *x)
{
return x->data.x509;
}
static int BIO_up_ref(BIO *b)
{
CRYPTO_add(&b->references, 1, CRYPTO_LOCK_BIO);
return 1;
}
static STACK_OF(X509_OBJECT) *X509_STORE_get0_objects(X509_STORE *store) {
return store->objs;
}
static int
SSL_SESSION_has_ticket(const SSL_SESSION *s)
{
return (s->tlsext_ticklen > 0) ? 1 : 0;
}
static unsigned long
SSL_SESSION_get_ticket_lifetime_hint(const SSL_SESSION *s)
{
return s->tlsext_tick_lifetime_hint;
}
#endif /* OpenSSL < 1.1.0 or LibreSSL < 2.7.0 */
/* Default cipher suites */
#ifndef PY_SSL_DEFAULT_CIPHERS
#define PY_SSL_DEFAULT_CIPHERS 1
#endif
#if PY_SSL_DEFAULT_CIPHERS == 0
#ifndef PY_SSL_DEFAULT_CIPHER_STRING
#error "Py_SSL_DEFAULT_CIPHERS 0 needs Py_SSL_DEFAULT_CIPHER_STRING"
#endif
#elif PY_SSL_DEFAULT_CIPHERS == 1
/* Python custom selection of sensible cipher suites
* DEFAULT: OpenSSL's default cipher list. Since 1.0.2 the list is in sensible order.
* !aNULL:!eNULL: really no NULL ciphers
* !MD5:!3DES:!DES:!RC4:!IDEA:!SEED: no weak or broken algorithms on old OpenSSL versions.
* !aDSS: no authentication with discrete logarithm DSA algorithm
* !SRP:!PSK: no secure remote password or pre-shared key authentication
*/
#define PY_SSL_DEFAULT_CIPHER_STRING "DEFAULT:!aNULL:!eNULL:!MD5:!3DES:!DES:!RC4:!IDEA:!SEED:!aDSS:!SRP:!PSK"
#elif PY_SSL_DEFAULT_CIPHERS == 2
/* Ignored in SSLContext constructor, only used to as _ssl.DEFAULT_CIPHER_STRING */
#define PY_SSL_DEFAULT_CIPHER_STRING SSL_DEFAULT_CIPHER_LIST
#else
#error "Unsupported PY_SSL_DEFAULT_CIPHERS"
#endif
enum py_ssl_error {
/* these mirror ssl.h */
PY_SSL_ERROR_NONE,
PY_SSL_ERROR_SSL,
PY_SSL_ERROR_WANT_READ,
PY_SSL_ERROR_WANT_WRITE,
PY_SSL_ERROR_WANT_X509_LOOKUP,
PY_SSL_ERROR_SYSCALL, /* look at error stack/return value/errno */
PY_SSL_ERROR_ZERO_RETURN,
PY_SSL_ERROR_WANT_CONNECT,
/* start of non ssl.h errorcodes */
PY_SSL_ERROR_EOF, /* special case of SSL_ERROR_SYSCALL */
PY_SSL_ERROR_NO_SOCKET, /* socket has been GC'd */
PY_SSL_ERROR_INVALID_ERROR_CODE
};
enum py_ssl_server_or_client {
PY_SSL_CLIENT,
PY_SSL_SERVER
};
enum py_ssl_cert_requirements {
PY_SSL_CERT_NONE,
PY_SSL_CERT_OPTIONAL,
PY_SSL_CERT_REQUIRED
};
enum py_ssl_version {
PY_SSL_VERSION_SSL2,
PY_SSL_VERSION_SSL3=1,
PY_SSL_VERSION_TLS, /* SSLv23 */
#if HAVE_TLSv1_2
PY_SSL_VERSION_TLS1,
PY_SSL_VERSION_TLS1_1,
PY_SSL_VERSION_TLS1_2,
#else
PY_SSL_VERSION_TLS1,
#endif
PY_SSL_VERSION_TLS_CLIENT=0x10,
PY_SSL_VERSION_TLS_SERVER,
};
enum py_proto_version {
PY_PROTO_MINIMUM_SUPPORTED = -2,
PY_PROTO_SSLv3 = SSL3_VERSION,
PY_PROTO_TLSv1 = TLS1_VERSION,
PY_PROTO_TLSv1_1 = TLS1_1_VERSION,
PY_PROTO_TLSv1_2 = TLS1_2_VERSION,
#ifdef TLS1_3_VERSION
PY_PROTO_TLSv1_3 = TLS1_3_VERSION,
#else
PY_PROTO_TLSv1_3 = 0x304,
#endif
PY_PROTO_MAXIMUM_SUPPORTED = -1,
/* OpenSSL has no dedicated API to set the minimum version to the maximum
* available version, and the other way around. We have to figure out the
* minimum and maximum available version on our own and hope for the best.
*/
#if defined(SSL3_VERSION) && !defined(OPENSSL_NO_SSL3)
PY_PROTO_MINIMUM_AVAILABLE = PY_PROTO_SSLv3,
#elif defined(TLS1_VERSION) && !defined(OPENSSL_NO_TLS1)
PY_PROTO_MINIMUM_AVAILABLE = PY_PROTO_TLSv1,
#elif defined(TLS1_1_VERSION) && !defined(OPENSSL_NO_TLS1_1)
PY_PROTO_MINIMUM_AVAILABLE = PY_PROTO_TLSv1_1,
#elif defined(TLS1_2_VERSION) && !defined(OPENSSL_NO_TLS1_2)
PY_PROTO_MINIMUM_AVAILABLE = PY_PROTO_TLSv1_2,
#elif defined(TLS1_3_VERSION) && !defined(OPENSSL_NO_TLS1_3)
PY_PROTO_MINIMUM_AVAILABLE = PY_PROTO_TLSv1_3,
#else
#error "PY_PROTO_MINIMUM_AVAILABLE not found"
#endif
#if defined(TLS1_3_VERSION) && !defined(OPENSSL_NO_TLS1_3)
PY_PROTO_MAXIMUM_AVAILABLE = PY_PROTO_TLSv1_3,
#elif defined(TLS1_2_VERSION) && !defined(OPENSSL_NO_TLS1_2)
PY_PROTO_MAXIMUM_AVAILABLE = PY_PROTO_TLSv1_2,
#elif defined(TLS1_1_VERSION) && !defined(OPENSSL_NO_TLS1_1)
PY_PROTO_MAXIMUM_AVAILABLE = PY_PROTO_TLSv1_1,
#elif defined(TLS1_VERSION) && !defined(OPENSSL_NO_TLS1)
PY_PROTO_MAXIMUM_AVAILABLE = PY_PROTO_TLSv1,
#elif defined(SSL3_VERSION) && !defined(OPENSSL_NO_SSL3)
PY_PROTO_MAXIMUM_AVAILABLE = PY_PROTO_SSLv3,
#else
#error "PY_PROTO_MAXIMUM_AVAILABLE not found"
#endif
};
/* serves as a flag to see whether we've initialized the SSL thread support. */
/* 0 means no, greater than 0 means yes */
static unsigned int _ssl_locks_count = 0;
/* SSL socket object */
#define X509_NAME_MAXLEN 256
/* SSL_CTX_clear_options() and SSL_clear_options() were first added in
* OpenSSL 0.9.8m but do not appear in some 0.9.9-dev versions such the
* 0.9.9 from "May 2008" that NetBSD 5.0 uses. */
#if OPENSSL_VERSION_NUMBER >= 0x009080dfL && OPENSSL_VERSION_NUMBER != 0x00909000L
# define HAVE_SSL_CTX_CLEAR_OPTIONS
#else
# undef HAVE_SSL_CTX_CLEAR_OPTIONS
#endif
/* In case of 'tls-unique' it will be 12 bytes for TLS, 36 bytes for
* older SSL, but let's be safe */
#define PySSL_CB_MAXLEN 128
typedef struct {
PyObject_HEAD
SSL_CTX *ctx;
#if HAVE_NPN
unsigned char *npn_protocols;
int npn_protocols_len;
#endif
#if HAVE_ALPN
unsigned char *alpn_protocols;
unsigned int alpn_protocols_len;
#endif
#ifndef OPENSSL_NO_TLSEXT
PyObject *set_sni_cb;
#endif
int check_hostname;
/* OpenSSL has no API to get hostflags from X509_VERIFY_PARAM* struct.
* We have to maintain our own copy. OpenSSL's hostflags default to 0.
*/
unsigned int hostflags;
int protocol;
#ifdef TLS1_3_VERSION
int post_handshake_auth;
#endif
PyObject *msg_cb;
#ifdef HAVE_OPENSSL_KEYLOG
PyObject *keylog_filename;
BIO *keylog_bio;
#endif
} PySSLContext;
typedef struct {
int ssl; /* last seen error from SSL */
int c; /* last seen error from libc */
#ifdef MS_WINDOWS
int ws; /* last seen error from winsock */
#endif
} _PySSLError;
typedef struct {
PyObject_HEAD
PyObject *Socket; /* weakref to socket on which we're layered */
SSL *ssl;
PySSLContext *ctx; /* weakref to SSL context */
char shutdown_seen_zero;
enum py_ssl_server_or_client socket_type;
PyObject *owner; /* Python level "owner" passed to servername callback */
PyObject *server_hostname;
_PySSLError err; /* last seen error from various sources */
/* Some SSL callbacks don't have error reporting. Callback wrappers
* store exception information on the socket. The handshake, read, write,
* and shutdown methods check for chained exceptions.
*/
PyObject *exc_type;
PyObject *exc_value;
PyObject *exc_tb;
} PySSLSocket;
typedef struct {
PyObject_HEAD
BIO *bio;
int eof_written;
} PySSLMemoryBIO;
typedef struct {
PyObject_HEAD
SSL_SESSION *session;
PySSLContext *ctx;
} PySSLSession;
static PyTypeObject PySSLContext_Type;
static PyTypeObject PySSLSocket_Type;
static PyTypeObject PySSLMemoryBIO_Type;
static PyTypeObject PySSLSession_Type;
static inline _PySSLError _PySSL_errno(int failed, const SSL *ssl, int retcode)
{
_PySSLError err = { 0 };
if (failed) {
#ifdef MS_WINDOWS
err.ws = WSAGetLastError();
_PySSL_FIX_ERRNO;
#endif
err.c = errno;
err.ssl = SSL_get_error(ssl, retcode);
}
return err;
}
/*[clinic input]
module _ssl
class _ssl._SSLContext "PySSLContext *" "&PySSLContext_Type"
class _ssl._SSLSocket "PySSLSocket *" "&PySSLSocket_Type"
class _ssl.MemoryBIO "PySSLMemoryBIO *" "&PySSLMemoryBIO_Type"
class _ssl.SSLSession "PySSLSession *" "&PySSLSession_Type"
[clinic start generated code]*/
/*[clinic end generated code: output=da39a3ee5e6b4b0d input=bdc67fafeeaa8109]*/
#include "clinic/_ssl.c.h"
static int PySSL_select(PySocketSockObject *s, int writing, _PyTime_t timeout);
static int PySSL_set_owner(PySSLSocket *, PyObject *, void *);
static int PySSL_set_session(PySSLSocket *, PyObject *, void *);
#define PySSLSocket_Check(v) (Py_TYPE(v) == &PySSLSocket_Type)
#define PySSLMemoryBIO_Check(v) (Py_TYPE(v) == &PySSLMemoryBIO_Type)
#define PySSLSession_Check(v) (Py_TYPE(v) == &PySSLSession_Type)
typedef enum {
SOCKET_IS_NONBLOCKING,
SOCKET_IS_BLOCKING,
SOCKET_HAS_TIMED_OUT,
SOCKET_HAS_BEEN_CLOSED,
SOCKET_TOO_LARGE_FOR_SELECT,
SOCKET_OPERATION_OK
} timeout_state;
/* Wrap error strings with filename and line # */
#define ERRSTR1(x,y,z) (x ":" y ": " z)
#define ERRSTR(x) ERRSTR1("_ssl.c", Py_STRINGIFY(__LINE__), x)
/* Get the socket from a PySSLSocket, if it has one */
#define GET_SOCKET(obj) ((obj)->Socket ? \
(PySocketSockObject *) PyWeakref_GetObject((obj)->Socket) : NULL)
/* If sock is NULL, use a timeout of 0 second */
#define GET_SOCKET_TIMEOUT(sock) \
((sock != NULL) ? (sock)->sock_timeout : 0)
#include "_ssl/debughelpers.c"
/*
* SSL errors.
*/
PyDoc_STRVAR(SSLError_doc,
"An error occurred in the SSL implementation.");
PyDoc_STRVAR(SSLCertVerificationError_doc,
"A certificate could not be verified.");
PyDoc_STRVAR(SSLZeroReturnError_doc,
"SSL/TLS session closed cleanly.");
PyDoc_STRVAR(SSLWantReadError_doc,
"Non-blocking SSL socket needs to read more data\n"
"before the requested operation can be completed.");
PyDoc_STRVAR(SSLWantWriteError_doc,
"Non-blocking SSL socket needs to write more data\n"
"before the requested operation can be completed.");
PyDoc_STRVAR(SSLSyscallError_doc,
"System error when attempting SSL operation.");
PyDoc_STRVAR(SSLEOFError_doc,
"SSL/TLS connection terminated abruptly.");
static PyObject *
SSLError_str(PyOSErrorObject *self)
{
if (self->strerror != NULL && PyUnicode_Check(self->strerror)) {
Py_INCREF(self->strerror);
return self->strerror;
}
else
return PyObject_Str(self->args);
}
static PyType_Slot sslerror_type_slots[] = {
{Py_tp_base, NULL}, /* Filled out in module init as it's not a constant */
{Py_tp_doc, (void*)SSLError_doc},
{Py_tp_str, SSLError_str},
{0, 0},
};
static PyType_Spec sslerror_type_spec = {
"ssl.SSLError",
sizeof(PyOSErrorObject),
0,
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE,
sslerror_type_slots
};
static void
fill_and_set_sslerror(PySSLSocket *sslsock, PyObject *type, int ssl_errno,
const char *errstr, int lineno, unsigned long errcode)
{
PyObject *err_value = NULL, *reason_obj = NULL, *lib_obj = NULL;
PyObject *verify_obj = NULL, *verify_code_obj = NULL;
PyObject *init_value, *msg, *key;
_Py_IDENTIFIER(reason);
_Py_IDENTIFIER(library);
_Py_IDENTIFIER(verify_message);
_Py_IDENTIFIER(verify_code);
if (errcode != 0) {
int lib, reason;
lib = ERR_GET_LIB(errcode);
reason = ERR_GET_REASON(errcode);
key = Py_BuildValue("ii", lib, reason);
if (key == NULL)
goto fail;
reason_obj = PyDict_GetItemWithError(err_codes_to_names, key);
Py_DECREF(key);
if (reason_obj == NULL && PyErr_Occurred()) {
goto fail;
}
key = PyLong_FromLong(lib);
if (key == NULL)
goto fail;
lib_obj = PyDict_GetItemWithError(lib_codes_to_names, key);
Py_DECREF(key);
if (lib_obj == NULL && PyErr_Occurred()) {
goto fail;
}
if (errstr == NULL)
errstr = ERR_reason_error_string(errcode);
}
if (errstr == NULL)
errstr = "unknown error";
/* verify code for cert validation error */
if ((sslsock != NULL) && (type == PySSLCertVerificationErrorObject)) {
const char *verify_str = NULL;
long verify_code;
verify_code = SSL_get_verify_result(sslsock->ssl);
verify_code_obj = PyLong_FromLong(verify_code);
if (verify_code_obj == NULL) {
goto fail;
}
switch (verify_code) {
#ifdef X509_V_ERR_HOSTNAME_MISMATCH
/* OpenSSL >= 1.0.2, LibreSSL >= 2.5.3 */
case X509_V_ERR_HOSTNAME_MISMATCH:
verify_obj = PyUnicode_FromFormat(
"Hostname mismatch, certificate is not valid for '%S'.",
sslsock->server_hostname
);
break;
#endif
#ifdef X509_V_ERR_IP_ADDRESS_MISMATCH
case X509_V_ERR_IP_ADDRESS_MISMATCH:
verify_obj = PyUnicode_FromFormat(
"IP address mismatch, certificate is not valid for '%S'.",
sslsock->server_hostname
);
break;
#endif
default:
verify_str = X509_verify_cert_error_string(verify_code);
if (verify_str != NULL) {
verify_obj = PyUnicode_FromString(verify_str);
} else {
verify_obj = Py_None;
Py_INCREF(verify_obj);
}
break;
}
if (verify_obj == NULL) {
goto fail;
}
}
if (verify_obj && reason_obj && lib_obj)
msg = PyUnicode_FromFormat("[%S: %S] %s: %S (_ssl.c:%d)",
lib_obj, reason_obj, errstr, verify_obj,
lineno);
else if (reason_obj && lib_obj)
msg = PyUnicode_FromFormat("[%S: %S] %s (_ssl.c:%d)",
lib_obj, reason_obj, errstr, lineno);
else if (lib_obj)
msg = PyUnicode_FromFormat("[%S] %s (_ssl.c:%d)",
lib_obj, errstr, lineno);
else
msg = PyUnicode_FromFormat("%s (_ssl.c:%d)", errstr, lineno);
if (msg == NULL)
goto fail;
init_value = Py_BuildValue("iN", ERR_GET_REASON(ssl_errno), msg);
if (init_value == NULL)
goto fail;
err_value = PyObject_CallObject(type, init_value);
Py_DECREF(init_value);
if (err_value == NULL)
goto fail;
if (reason_obj == NULL)
reason_obj = Py_None;
if (_PyObject_SetAttrId(err_value, &PyId_reason, reason_obj))
goto fail;
if (lib_obj == NULL)
lib_obj = Py_None;
if (_PyObject_SetAttrId(err_value, &PyId_library, lib_obj))
goto fail;
if ((sslsock != NULL) && (type == PySSLCertVerificationErrorObject)) {
/* Only set verify code / message for SSLCertVerificationError */
if (_PyObject_SetAttrId(err_value, &PyId_verify_code,
verify_code_obj))
goto fail;
if (_PyObject_SetAttrId(err_value, &PyId_verify_message, verify_obj))
goto fail;
}
PyErr_SetObject(type, err_value);
fail:
Py_XDECREF(err_value);
Py_XDECREF(verify_code_obj);
Py_XDECREF(verify_obj);
}
static int
PySSL_ChainExceptions(PySSLSocket *sslsock) {
if (sslsock->exc_type == NULL)
return 0;
_PyErr_ChainExceptions(sslsock->exc_type, sslsock->exc_value, sslsock->exc_tb);
sslsock->exc_type = NULL;
sslsock->exc_value = NULL;
sslsock->exc_tb = NULL;
return -1;
}
static PyObject *
PySSL_SetError(PySSLSocket *sslsock, int ret, const char *filename, int lineno)
{
PyObject *type = PySSLErrorObject;
char *errstr = NULL;
_PySSLError err;
enum py_ssl_error p = PY_SSL_ERROR_NONE;
unsigned long e = 0;
assert(ret <= 0);
e = ERR_peek_last_error();
if (sslsock->ssl != NULL) {
err = sslsock->err;
switch (err.ssl) {
case SSL_ERROR_ZERO_RETURN:
errstr = "TLS/SSL connection has been closed (EOF)";
type = PySSLZeroReturnErrorObject;
p = PY_SSL_ERROR_ZERO_RETURN;
break;
case SSL_ERROR_WANT_READ:
errstr = "The operation did not complete (read)";
type = PySSLWantReadErrorObject;
p = PY_SSL_ERROR_WANT_READ;
break;
case SSL_ERROR_WANT_WRITE:
p = PY_SSL_ERROR_WANT_WRITE;
type = PySSLWantWriteErrorObject;
errstr = "The operation did not complete (write)";
break;
case SSL_ERROR_WANT_X509_LOOKUP:
p = PY_SSL_ERROR_WANT_X509_LOOKUP;
errstr = "The operation did not complete (X509 lookup)";
break;
case SSL_ERROR_WANT_CONNECT:
p = PY_SSL_ERROR_WANT_CONNECT;
errstr = "The operation did not complete (connect)";
break;
case SSL_ERROR_SYSCALL:
{
if (e == 0) {
PySocketSockObject *s = GET_SOCKET(sslsock);
if (ret == 0 || (((PyObject *)s) == Py_None)) {
p = PY_SSL_ERROR_EOF;
type = PySSLEOFErrorObject;
errstr = "EOF occurred in violation of protocol";
} else if (s && ret == -1) {
/* underlying BIO reported an I/O error */
ERR_clear_error();
#ifdef MS_WINDOWS
if (err.ws) {
return PyErr_SetFromWindowsErr(err.ws);
}
#endif
if (err.c) {
errno = err.c;
return PyErr_SetFromErrno(PyExc_OSError);
}
Py_INCREF(s);
s->errorhandler();
Py_DECREF(s);
return NULL;
} else { /* possible? */
p = PY_SSL_ERROR_SYSCALL;
type = PySSLSyscallErrorObject;
errstr = "Some I/O error occurred";
}
} else {
p = PY_SSL_ERROR_SYSCALL;
}
break;
}
case SSL_ERROR_SSL:
{
p = PY_SSL_ERROR_SSL;
if (e == 0) {
/* possible? */
errstr = "A failure in the SSL library occurred";
}
if (ERR_GET_LIB(e) == ERR_LIB_SSL &&
ERR_GET_REASON(e) == SSL_R_CERTIFICATE_VERIFY_FAILED) {
type = PySSLCertVerificationErrorObject;
}
break;
}
default:
p = PY_SSL_ERROR_INVALID_ERROR_CODE;
errstr = "Invalid error code";
}
}
fill_and_set_sslerror(sslsock, type, p, errstr, lineno, e);
ERR_clear_error();
PySSL_ChainExceptions(sslsock);
return NULL;
}
static PyObject *
_setSSLError (const char *errstr, int errcode, const char *filename, int lineno) {
if (errstr == NULL)
errcode = ERR_peek_last_error();
else
errcode = 0;
fill_and_set_sslerror(NULL, PySSLErrorObject, errcode, errstr, lineno, errcode);
ERR_clear_error();
return NULL;
}
/*
* SSL objects
*/
static int
_ssl_configure_hostname(PySSLSocket *self, const char* server_hostname)
{
int retval = -1;
ASN1_OCTET_STRING *ip;
PyObject *hostname;
size_t len;
assert(server_hostname);
/* Disable OpenSSL's special mode with leading dot in hostname:
* When name starts with a dot (e.g ".example.com"), it will be
* matched by a certificate valid for any sub-domain of name.
*/
len = strlen(server_hostname);
if (len == 0 || *server_hostname == '.') {
PyErr_SetString(
PyExc_ValueError,
"server_hostname cannot be an empty string or start with a "
"leading dot.");
return retval;
}
/* inet_pton is not available on all platforms. */
ip = a2i_IPADDRESS(server_hostname);
if (ip == NULL) {
ERR_clear_error();
}
hostname = PyUnicode_Decode(server_hostname, len, "ascii", "strict");
if (hostname == NULL) {
goto error;
}
self->server_hostname = hostname;
/* Only send SNI extension for non-IP hostnames */
if (ip == NULL) {
if (!SSL_set_tlsext_host_name(self->ssl, server_hostname)) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
}
}
if (self->ctx->check_hostname) {
X509_VERIFY_PARAM *param = SSL_get0_param(self->ssl);
if (ip == NULL) {
if (!X509_VERIFY_PARAM_set1_host(param, server_hostname,
strlen(server_hostname))) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto error;
}
} else {
if (!X509_VERIFY_PARAM_set1_ip(param, ASN1_STRING_data(ip),
ASN1_STRING_length(ip))) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto error;
}
}
}
retval = 0;
error:
if (ip != NULL) {
ASN1_OCTET_STRING_free(ip);
}
return retval;
}
static PySSLSocket *
newPySSLSocket(PySSLContext *sslctx, PySocketSockObject *sock,
enum py_ssl_server_or_client socket_type,
char *server_hostname,
PyObject *owner, PyObject *session,
PySSLMemoryBIO *inbio, PySSLMemoryBIO *outbio)
{
PySSLSocket *self;
SSL_CTX *ctx = sslctx->ctx;
_PySSLError err = { 0 };
self = PyObject_New(PySSLSocket, &PySSLSocket_Type);
if (self == NULL)
return NULL;
self->ssl = NULL;
self->Socket = NULL;
self->ctx = sslctx;
Py_INCREF(sslctx);
self->shutdown_seen_zero = 0;
self->owner = NULL;
self->server_hostname = NULL;
self->err = err;
self->exc_type = NULL;
self->exc_value = NULL;
self->exc_tb = NULL;
/* Make sure the SSL error state is initialized */
ERR_clear_error();
PySSL_BEGIN_ALLOW_THREADS
self->ssl = SSL_new(ctx);
PySSL_END_ALLOW_THREADS
if (self->ssl == NULL) {
Py_DECREF(self);
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
SSL_set_app_data(self->ssl, self);
if (sock) {
SSL_set_fd(self->ssl, Py_SAFE_DOWNCAST(sock->sock_fd, SOCKET_T, int));
} else {
/* BIOs are reference counted and SSL_set_bio borrows our reference.
* To prevent a double free in memory_bio_dealloc() we need to take an
* extra reference here. */
BIO_up_ref(inbio->bio);
BIO_up_ref(outbio->bio);
SSL_set_bio(self->ssl, inbio->bio, outbio->bio);
}
SSL_set_mode(self->ssl,
SSL_MODE_ACCEPT_MOVING_WRITE_BUFFER | SSL_MODE_AUTO_RETRY);
#ifdef TLS1_3_VERSION
if (sslctx->post_handshake_auth == 1) {
if (socket_type == PY_SSL_SERVER) {
/* bpo-37428: OpenSSL does not ignore SSL_VERIFY_POST_HANDSHAKE.
* Set SSL_VERIFY_POST_HANDSHAKE flag only for server sockets and
* only in combination with SSL_VERIFY_PEER flag. */
int mode = SSL_get_verify_mode(self->ssl);
if (mode & SSL_VERIFY_PEER) {
int (*verify_cb)(int, X509_STORE_CTX *) = NULL;
verify_cb = SSL_get_verify_callback(self->ssl);
mode |= SSL_VERIFY_POST_HANDSHAKE;
SSL_set_verify(self->ssl, mode, verify_cb);
}
} else {
/* client socket */
SSL_set_post_handshake_auth(self->ssl, 1);
}
}
#endif
if (server_hostname != NULL) {
if (_ssl_configure_hostname(self, server_hostname) < 0) {
Py_DECREF(self);
return NULL;
}
}
/* If the socket is in non-blocking mode or timeout mode, set the BIO
* to non-blocking mode (blocking is the default)
*/
if (sock && sock->sock_timeout >= 0) {
BIO_set_nbio(SSL_get_rbio(self->ssl), 1);
BIO_set_nbio(SSL_get_wbio(self->ssl), 1);
}
PySSL_BEGIN_ALLOW_THREADS
if (socket_type == PY_SSL_CLIENT)
SSL_set_connect_state(self->ssl);
else
SSL_set_accept_state(self->ssl);
PySSL_END_ALLOW_THREADS
self->socket_type = socket_type;
if (sock != NULL) {
self->Socket = PyWeakref_NewRef((PyObject *) sock, NULL);
if (self->Socket == NULL) {
Py_DECREF(self);
return NULL;
}
}
if (owner && owner != Py_None) {
if (PySSL_set_owner(self, owner, NULL) == -1) {
Py_DECREF(self);
return NULL;
}
}
if (session && session != Py_None) {
if (PySSL_set_session(self, session, NULL) == -1) {
Py_DECREF(self);
return NULL;
}
}
return self;
}
/* SSL object methods */
/*[clinic input]
_ssl._SSLSocket.do_handshake
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_do_handshake_impl(PySSLSocket *self)
/*[clinic end generated code: output=6c0898a8936548f6 input=d2d737de3df018c8]*/
{
int ret;
_PySSLError err;
int sockstate, nonblocking;
PySocketSockObject *sock = GET_SOCKET(self);
_PyTime_t timeout, deadline = 0;
int has_timeout;
if (sock) {
if (((PyObject*)sock) == Py_None) {
_setSSLError("Underlying socket connection gone",
PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
return NULL;
}
Py_INCREF(sock);
/* just in case the blocking state of the socket has been changed */
nonblocking = (sock->sock_timeout >= 0);
BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
}
timeout = GET_SOCKET_TIMEOUT(sock);
has_timeout = (timeout > 0);
if (has_timeout)
deadline = _PyTime_GetMonotonicClock() + timeout;
/* Actually negotiate SSL connection */
/* XXX If SSL_do_handshake() returns 0, it's also a failure. */
do {
PySSL_BEGIN_ALLOW_THREADS
ret = SSL_do_handshake(self->ssl);
err = _PySSL_errno(ret < 1, self->ssl, ret);
PySSL_END_ALLOW_THREADS
self->err = err;
if (PyErr_CheckSignals())
goto error;
if (has_timeout)
timeout = deadline - _PyTime_GetMonotonicClock();
if (err.ssl == SSL_ERROR_WANT_READ) {
sockstate = PySSL_select(sock, 0, timeout);
} else if (err.ssl == SSL_ERROR_WANT_WRITE) {
sockstate = PySSL_select(sock, 1, timeout);
} else {
sockstate = SOCKET_OPERATION_OK;
}
if (sockstate == SOCKET_HAS_TIMED_OUT) {
PyErr_SetString(PySocketModule.timeout_error,
ERRSTR("The handshake operation timed out"));
goto error;
} else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
PyErr_SetString(PySSLErrorObject,
ERRSTR("Underlying socket has been closed."));
goto error;
} else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
PyErr_SetString(PySSLErrorObject,
ERRSTR("Underlying socket too large for select()."));
goto error;
} else if (sockstate == SOCKET_IS_NONBLOCKING) {
break;
}
} while (err.ssl == SSL_ERROR_WANT_READ ||
err.ssl == SSL_ERROR_WANT_WRITE);
Py_XDECREF(sock);
if (ret < 1)
return PySSL_SetError(self, ret, __FILE__, __LINE__);
if (PySSL_ChainExceptions(self) < 0)
return NULL;
Py_RETURN_NONE;
error:
Py_XDECREF(sock);
PySSL_ChainExceptions(self);
return NULL;
}
static PyObject *
_asn1obj2py(const ASN1_OBJECT *name, int no_name)
{
char buf[X509_NAME_MAXLEN];
char *namebuf = buf;
int buflen;
PyObject *name_obj = NULL;
buflen = OBJ_obj2txt(namebuf, X509_NAME_MAXLEN, name, no_name);
if (buflen < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
/* initial buffer is too small for oid + terminating null byte */
if (buflen > X509_NAME_MAXLEN - 1) {
/* make OBJ_obj2txt() calculate the required buflen */
buflen = OBJ_obj2txt(NULL, 0, name, no_name);
/* allocate len + 1 for terminating NULL byte */
namebuf = PyMem_Malloc(buflen + 1);
if (namebuf == NULL) {
PyErr_NoMemory();
return NULL;
}
buflen = OBJ_obj2txt(namebuf, buflen + 1, name, no_name);
if (buflen < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto done;
}
}
if (!buflen && no_name) {
Py_INCREF(Py_None);
name_obj = Py_None;
}
else {
name_obj = PyUnicode_FromStringAndSize(namebuf, buflen);
}
done:
if (buf != namebuf) {
PyMem_Free(namebuf);
}
return name_obj;
}
static PyObject *
_create_tuple_for_attribute(ASN1_OBJECT *name, ASN1_STRING *value)
{
Py_ssize_t buflen;
unsigned char *valuebuf = NULL;
PyObject *attr;
buflen = ASN1_STRING_to_UTF8(&valuebuf, value);
if (buflen < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
attr = Py_BuildValue("Ns#", _asn1obj2py(name, 0), valuebuf, buflen);
OPENSSL_free(valuebuf);
return attr;
}
static PyObject *
_create_tuple_for_X509_NAME (X509_NAME *xname)
{
PyObject *dn = NULL; /* tuple which represents the "distinguished name" */
PyObject *rdn = NULL; /* tuple to hold a "relative distinguished name" */
PyObject *rdnt;
PyObject *attr = NULL; /* tuple to hold an attribute */
int entry_count = X509_NAME_entry_count(xname);
X509_NAME_ENTRY *entry;
ASN1_OBJECT *name;
ASN1_STRING *value;
int index_counter;
int rdn_level = -1;
int retcode;
dn = PyList_New(0);
if (dn == NULL)
return NULL;
/* now create another tuple to hold the top-level RDN */
rdn = PyList_New(0);
if (rdn == NULL)
goto fail0;
for (index_counter = 0;
index_counter < entry_count;
index_counter++)
{
entry = X509_NAME_get_entry(xname, index_counter);
/* check to see if we've gotten to a new RDN */
if (rdn_level >= 0) {
if (rdn_level != X509_NAME_ENTRY_set(entry)) {
/* yes, new RDN */
/* add old RDN to DN */
rdnt = PyList_AsTuple(rdn);
Py_DECREF(rdn);
if (rdnt == NULL)
goto fail0;
retcode = PyList_Append(dn, rdnt);
Py_DECREF(rdnt);
if (retcode < 0)
goto fail0;
/* create new RDN */
rdn = PyList_New(0);
if (rdn == NULL)
goto fail0;
}
}
rdn_level = X509_NAME_ENTRY_set(entry);
/* now add this attribute to the current RDN */
name = X509_NAME_ENTRY_get_object(entry);
value = X509_NAME_ENTRY_get_data(entry);
attr = _create_tuple_for_attribute(name, value);
/*
fprintf(stderr, "RDN level %d, attribute %s: %s\n",
entry->set,
PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 0)),
PyBytes_AS_STRING(PyTuple_GET_ITEM(attr, 1)));
*/
if (attr == NULL)
goto fail1;
retcode = PyList_Append(rdn, attr);
Py_DECREF(attr);
if (retcode < 0)
goto fail1;
}
/* now, there's typically a dangling RDN */
if (rdn != NULL) {
if (PyList_GET_SIZE(rdn) > 0) {
rdnt = PyList_AsTuple(rdn);
Py_DECREF(rdn);
if (rdnt == NULL)
goto fail0;
retcode = PyList_Append(dn, rdnt);
Py_DECREF(rdnt);
if (retcode < 0)
goto fail0;
}
else {
Py_DECREF(rdn);
}
}
/* convert list to tuple */
rdnt = PyList_AsTuple(dn);
Py_DECREF(dn);
if (rdnt == NULL)
return NULL;
return rdnt;
fail1:
Py_XDECREF(rdn);
fail0:
Py_XDECREF(dn);
return NULL;
}
static PyObject *
_get_peer_alt_names (X509 *certificate) {
/* this code follows the procedure outlined in
OpenSSL's crypto/x509v3/v3_prn.c:X509v3_EXT_print()
function to extract the STACK_OF(GENERAL_NAME),
then iterates through the stack to add the
names. */
int j;
PyObject *peer_alt_names = Py_None;
PyObject *v = NULL, *t;
GENERAL_NAMES *names = NULL;
GENERAL_NAME *name;
BIO *biobuf = NULL;
char buf[2048];
char *vptr;
int len;
if (certificate == NULL)
return peer_alt_names;
/* get a memory buffer */
biobuf = BIO_new(BIO_s_mem());
if (biobuf == NULL) {
PyErr_SetString(PySSLErrorObject, "failed to allocate BIO");
return NULL;
}
names = (GENERAL_NAMES *)X509_get_ext_d2i(
certificate, NID_subject_alt_name, NULL, NULL);
if (names != NULL) {
if (peer_alt_names == Py_None) {
peer_alt_names = PyList_New(0);
if (peer_alt_names == NULL)
goto fail;
}
for(j = 0; j < sk_GENERAL_NAME_num(names); j++) {
/* get a rendering of each name in the set of names */
int gntype;
ASN1_STRING *as = NULL;
name = sk_GENERAL_NAME_value(names, j);
gntype = name->type;
switch (gntype) {
case GEN_DIRNAME:
/* we special-case DirName as a tuple of
tuples of attributes */
t = PyTuple_New(2);
if (t == NULL) {
goto fail;
}
v = PyUnicode_FromString("DirName");
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 0, v);
v = _create_tuple_for_X509_NAME (name->d.dirn);
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 1, v);
break;
case GEN_EMAIL:
case GEN_DNS:
case GEN_URI:
/* GENERAL_NAME_print() doesn't handle NULL bytes in ASN1_string
correctly, CVE-2013-4238 */
t = PyTuple_New(2);
if (t == NULL)
goto fail;
switch (gntype) {
case GEN_EMAIL:
v = PyUnicode_FromString("email");
as = name->d.rfc822Name;
break;
case GEN_DNS:
v = PyUnicode_FromString("DNS");
as = name->d.dNSName;
break;
case GEN_URI:
v = PyUnicode_FromString("URI");
as = name->d.uniformResourceIdentifier;
break;
}
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 0, v);
v = PyUnicode_FromStringAndSize((char *)ASN1_STRING_data(as),
ASN1_STRING_length(as));
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 1, v);
break;
case GEN_RID:
t = PyTuple_New(2);
if (t == NULL)
goto fail;
v = PyUnicode_FromString("Registered ID");
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 0, v);
len = i2t_ASN1_OBJECT(buf, sizeof(buf)-1, name->d.rid);
if (len < 0) {
Py_DECREF(t);
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto fail;
} else if (len >= (int)sizeof(buf)) {
v = PyUnicode_FromString("<INVALID>");
} else {
v = PyUnicode_FromStringAndSize(buf, len);
}
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 1, v);
break;
default:
/* for everything else, we use the OpenSSL print form */
switch (gntype) {
/* check for new general name type */
case GEN_OTHERNAME:
case GEN_X400:
case GEN_EDIPARTY:
case GEN_IPADD:
case GEN_RID:
break;
default:
if (PyErr_WarnFormat(PyExc_RuntimeWarning, 1,
"Unknown general name type %d",
gntype) == -1) {
goto fail;
}
break;
}
(void) BIO_reset(biobuf);
GENERAL_NAME_print(biobuf, name);
len = BIO_gets(biobuf, buf, sizeof(buf)-1);
if (len < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto fail;
}
vptr = strchr(buf, ':');
if (vptr == NULL) {
PyErr_Format(PyExc_ValueError,
"Invalid value %.200s",
buf);
goto fail;
}
t = PyTuple_New(2);
if (t == NULL)
goto fail;
v = PyUnicode_FromStringAndSize(buf, (vptr - buf));
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 0, v);
v = PyUnicode_FromStringAndSize((vptr + 1),
(len - (vptr - buf + 1)));
if (v == NULL) {
Py_DECREF(t);
goto fail;
}
PyTuple_SET_ITEM(t, 1, v);
break;
}
/* and add that rendering to the list */
if (PyList_Append(peer_alt_names, t) < 0) {
Py_DECREF(t);
goto fail;
}
Py_DECREF(t);
}
sk_GENERAL_NAME_pop_free(names, GENERAL_NAME_free);
}
BIO_free(biobuf);
if (peer_alt_names != Py_None) {
v = PyList_AsTuple(peer_alt_names);
Py_DECREF(peer_alt_names);
return v;
} else {
return peer_alt_names;
}
fail:
if (biobuf != NULL)
BIO_free(biobuf);
if (peer_alt_names != Py_None) {
Py_XDECREF(peer_alt_names);
}
return NULL;
}
static PyObject *
_get_aia_uri(X509 *certificate, int nid) {
PyObject *lst = NULL, *ostr = NULL;
int i, result;
AUTHORITY_INFO_ACCESS *info;
info = X509_get_ext_d2i(certificate, NID_info_access, NULL, NULL);
if (info == NULL)
return Py_None;
if (sk_ACCESS_DESCRIPTION_num(info) == 0) {
AUTHORITY_INFO_ACCESS_free(info);
return Py_None;
}
if ((lst = PyList_New(0)) == NULL) {
goto fail;
}
for (i = 0; i < sk_ACCESS_DESCRIPTION_num(info); i++) {
ACCESS_DESCRIPTION *ad = sk_ACCESS_DESCRIPTION_value(info, i);
ASN1_IA5STRING *uri;
if ((OBJ_obj2nid(ad->method) != nid) ||
(ad->location->type != GEN_URI)) {
continue;
}
uri = ad->location->d.uniformResourceIdentifier;
ostr = PyUnicode_FromStringAndSize((char *)uri->data,
uri->length);
if (ostr == NULL) {
goto fail;
}
result = PyList_Append(lst, ostr);
Py_DECREF(ostr);
if (result < 0) {
goto fail;
}
}
AUTHORITY_INFO_ACCESS_free(info);
/* convert to tuple or None */
if (PyList_Size(lst) == 0) {
Py_DECREF(lst);
return Py_None;
} else {
PyObject *tup;
tup = PyList_AsTuple(lst);
Py_DECREF(lst);
return tup;
}
fail:
AUTHORITY_INFO_ACCESS_free(info);
Py_XDECREF(lst);
return NULL;
}
static PyObject *
_get_crl_dp(X509 *certificate) {
STACK_OF(DIST_POINT) *dps;
int i, j;
PyObject *lst, *res = NULL;
dps = X509_get_ext_d2i(certificate, NID_crl_distribution_points, NULL, NULL);
if (dps == NULL)
return Py_None;
lst = PyList_New(0);
if (lst == NULL)
goto done;
for (i=0; i < sk_DIST_POINT_num(dps); i++) {
DIST_POINT *dp;
STACK_OF(GENERAL_NAME) *gns;
dp = sk_DIST_POINT_value(dps, i);
if (dp->distpoint == NULL) {
/* Ignore empty DP value, CVE-2019-5010 */
continue;
}
gns = dp->distpoint->name.fullname;
for (j=0; j < sk_GENERAL_NAME_num(gns); j++) {
GENERAL_NAME *gn;
ASN1_IA5STRING *uri;
PyObject *ouri;
int err;
gn = sk_GENERAL_NAME_value(gns, j);
if (gn->type != GEN_URI) {
continue;
}
uri = gn->d.uniformResourceIdentifier;
ouri = PyUnicode_FromStringAndSize((char *)uri->data,
uri->length);
if (ouri == NULL)
goto done;
err = PyList_Append(lst, ouri);
Py_DECREF(ouri);
if (err < 0)
goto done;
}
}
/* Convert to tuple. */
res = (PyList_GET_SIZE(lst) > 0) ? PyList_AsTuple(lst) : Py_None;
done:
Py_XDECREF(lst);
CRL_DIST_POINTS_free(dps);
return res;
}
static PyObject *
_decode_certificate(X509 *certificate) {
PyObject *retval = NULL;
BIO *biobuf = NULL;
PyObject *peer;
PyObject *peer_alt_names = NULL;
PyObject *issuer;
PyObject *version;
PyObject *sn_obj;
PyObject *obj;
ASN1_INTEGER *serialNumber;
char buf[2048];
int len, result;
ASN1_TIME *notBefore, *notAfter;
PyObject *pnotBefore, *pnotAfter;
retval = PyDict_New();
if (retval == NULL)
return NULL;
peer = _create_tuple_for_X509_NAME(
X509_get_subject_name(certificate));
if (peer == NULL)
goto fail0;
if (PyDict_SetItemString(retval, (const char *) "subject", peer) < 0) {
Py_DECREF(peer);
goto fail0;
}
Py_DECREF(peer);
issuer = _create_tuple_for_X509_NAME(
X509_get_issuer_name(certificate));
if (issuer == NULL)
goto fail0;
if (PyDict_SetItemString(retval, (const char *)"issuer", issuer) < 0) {
Py_DECREF(issuer);
goto fail0;
}
Py_DECREF(issuer);
version = PyLong_FromLong(X509_get_version(certificate) + 1);
if (version == NULL)
goto fail0;
if (PyDict_SetItemString(retval, "version", version) < 0) {
Py_DECREF(version);
goto fail0;
}
Py_DECREF(version);
/* get a memory buffer */
biobuf = BIO_new(BIO_s_mem());
if (biobuf == NULL) {
PyErr_SetString(PySSLErrorObject, "failed to allocate BIO");
goto fail0;
}
(void) BIO_reset(biobuf);
serialNumber = X509_get_serialNumber(certificate);
/* should not exceed 20 octets, 160 bits, so buf is big enough */
i2a_ASN1_INTEGER(biobuf, serialNumber);
len = BIO_gets(biobuf, buf, sizeof(buf)-1);
if (len < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto fail1;
}
sn_obj = PyUnicode_FromStringAndSize(buf, len);
if (sn_obj == NULL)
goto fail1;
if (PyDict_SetItemString(retval, "serialNumber", sn_obj) < 0) {
Py_DECREF(sn_obj);
goto fail1;
}
Py_DECREF(sn_obj);
(void) BIO_reset(biobuf);
notBefore = X509_get_notBefore(certificate);
ASN1_TIME_print(biobuf, notBefore);
len = BIO_gets(biobuf, buf, sizeof(buf)-1);
if (len < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto fail1;
}
pnotBefore = PyUnicode_FromStringAndSize(buf, len);
if (pnotBefore == NULL)
goto fail1;
if (PyDict_SetItemString(retval, "notBefore", pnotBefore) < 0) {
Py_DECREF(pnotBefore);
goto fail1;
}
Py_DECREF(pnotBefore);
(void) BIO_reset(biobuf);
notAfter = X509_get_notAfter(certificate);
ASN1_TIME_print(biobuf, notAfter);
len = BIO_gets(biobuf, buf, sizeof(buf)-1);
if (len < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto fail1;
}
pnotAfter = PyUnicode_FromStringAndSize(buf, len);
if (pnotAfter == NULL)
goto fail1;
if (PyDict_SetItemString(retval, "notAfter", pnotAfter) < 0) {
Py_DECREF(pnotAfter);
goto fail1;
}
Py_DECREF(pnotAfter);
/* Now look for subjectAltName */
peer_alt_names = _get_peer_alt_names(certificate);
if (peer_alt_names == NULL)
goto fail1;
else if (peer_alt_names != Py_None) {
if (PyDict_SetItemString(retval, "subjectAltName",
peer_alt_names) < 0) {
Py_DECREF(peer_alt_names);
goto fail1;
}
Py_DECREF(peer_alt_names);
}
/* Authority Information Access: OCSP URIs */
obj = _get_aia_uri(certificate, NID_ad_OCSP);
if (obj == NULL) {
goto fail1;
} else if (obj != Py_None) {
result = PyDict_SetItemString(retval, "OCSP", obj);
Py_DECREF(obj);
if (result < 0) {
goto fail1;
}
}
obj = _get_aia_uri(certificate, NID_ad_ca_issuers);
if (obj == NULL) {
goto fail1;
} else if (obj != Py_None) {
result = PyDict_SetItemString(retval, "caIssuers", obj);
Py_DECREF(obj);
if (result < 0) {
goto fail1;
}
}
/* CDP (CRL distribution points) */
obj = _get_crl_dp(certificate);
if (obj == NULL) {
goto fail1;
} else if (obj != Py_None) {
result = PyDict_SetItemString(retval, "crlDistributionPoints", obj);
Py_DECREF(obj);
if (result < 0) {
goto fail1;
}
}
BIO_free(biobuf);
return retval;
fail1:
if (biobuf != NULL)
BIO_free(biobuf);
fail0:
Py_XDECREF(retval);
return NULL;
}
static PyObject *
_certificate_to_der(X509 *certificate)
{
unsigned char *bytes_buf = NULL;
int len;
PyObject *retval;
bytes_buf = NULL;
len = i2d_X509(certificate, &bytes_buf);
if (len < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
/* this is actually an immutable bytes sequence */
retval = PyBytes_FromStringAndSize((const char *) bytes_buf, len);
OPENSSL_free(bytes_buf);
return retval;
}
/*[clinic input]
_ssl._test_decode_cert
path: object(converter="PyUnicode_FSConverter")
/
[clinic start generated code]*/
static PyObject *
_ssl__test_decode_cert_impl(PyObject *module, PyObject *path)
/*[clinic end generated code: output=96becb9abb23c091 input=cdeaaf02d4346628]*/
{
PyObject *retval = NULL;
X509 *x=NULL;
BIO *cert;
if ((cert=BIO_new(BIO_s_file())) == NULL) {
PyErr_SetString(PySSLErrorObject,
"Can't malloc memory to read file");
goto fail0;
}
if (BIO_read_filename(cert, PyBytes_AsString(path)) <= 0) {
PyErr_SetString(PySSLErrorObject,
"Can't open file");
goto fail0;
}
x = PEM_read_bio_X509_AUX(cert,NULL, NULL, NULL);
if (x == NULL) {
PyErr_SetString(PySSLErrorObject,
"Error decoding PEM-encoded file");
goto fail0;
}
retval = _decode_certificate(x);
X509_free(x);
fail0:
Py_DECREF(path);
if (cert != NULL) BIO_free(cert);
return retval;
}
/*[clinic input]
_ssl._SSLSocket.getpeercert
der as binary_mode: bool = False
/
Returns the certificate for the peer.
If no certificate was provided, returns None. If a certificate was
provided, but not validated, returns an empty dictionary. Otherwise
returns a dict containing information about the peer certificate.
If the optional argument is True, returns a DER-encoded copy of the
peer certificate, or None if no certificate was provided. This will
return the certificate even if it wasn't validated.
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_getpeercert_impl(PySSLSocket *self, int binary_mode)
/*[clinic end generated code: output=1f0ab66dfb693c88 input=c0fbe802e57629b7]*/
{
int verification;
X509 *peer_cert;
PyObject *result;
if (!SSL_is_init_finished(self->ssl)) {
PyErr_SetString(PyExc_ValueError,
"handshake not done yet");
return NULL;
}
peer_cert = SSL_get_peer_certificate(self->ssl);
if (peer_cert == NULL)
Py_RETURN_NONE;
if (binary_mode) {
/* return cert in DER-encoded format */
result = _certificate_to_der(peer_cert);
} else {
verification = SSL_CTX_get_verify_mode(SSL_get_SSL_CTX(self->ssl));
if ((verification & SSL_VERIFY_PEER) == 0)
result = PyDict_New();
else
result = _decode_certificate(peer_cert);
}
X509_free(peer_cert);
return result;
}
static PyObject *
cipher_to_tuple(const SSL_CIPHER *cipher)
{
const char *cipher_name, *cipher_protocol;
PyObject *v, *retval = PyTuple_New(3);
if (retval == NULL)
return NULL;
cipher_name = SSL_CIPHER_get_name(cipher);
if (cipher_name == NULL) {
Py_INCREF(Py_None);
PyTuple_SET_ITEM(retval, 0, Py_None);
} else {
v = PyUnicode_FromString(cipher_name);
if (v == NULL)
goto fail;
PyTuple_SET_ITEM(retval, 0, v);
}
cipher_protocol = SSL_CIPHER_get_version(cipher);
if (cipher_protocol == NULL) {
Py_INCREF(Py_None);
PyTuple_SET_ITEM(retval, 1, Py_None);
} else {
v = PyUnicode_FromString(cipher_protocol);
if (v == NULL)
goto fail;
PyTuple_SET_ITEM(retval, 1, v);
}
v = PyLong_FromLong(SSL_CIPHER_get_bits(cipher, NULL));
if (v == NULL)
goto fail;
PyTuple_SET_ITEM(retval, 2, v);
return retval;
fail:
Py_DECREF(retval);
return NULL;
}
#if OPENSSL_VERSION_NUMBER >= 0x10002000UL
static PyObject *
cipher_to_dict(const SSL_CIPHER *cipher)
{
const char *cipher_name, *cipher_protocol;
unsigned long cipher_id;
int alg_bits, strength_bits, len;
char buf[512] = {0};
#if OPENSSL_VERSION_1_1
int aead, nid;
const char *skcipher = NULL, *digest = NULL, *kx = NULL, *auth = NULL;
#endif
/* can be NULL */
cipher_name = SSL_CIPHER_get_name(cipher);
cipher_protocol = SSL_CIPHER_get_version(cipher);
cipher_id = SSL_CIPHER_get_id(cipher);
SSL_CIPHER_description(cipher, buf, sizeof(buf) - 1);
/* Downcast to avoid a warning. Safe since buf is always 512 bytes */
len = (int)strlen(buf);
if (len > 1 && buf[len-1] == '\n')
buf[len-1] = '\0';
strength_bits = SSL_CIPHER_get_bits(cipher, &alg_bits);
#if OPENSSL_VERSION_1_1
aead = SSL_CIPHER_is_aead(cipher);
nid = SSL_CIPHER_get_cipher_nid(cipher);
skcipher = nid != NID_undef ? OBJ_nid2ln(nid) : NULL;
nid = SSL_CIPHER_get_digest_nid(cipher);
digest = nid != NID_undef ? OBJ_nid2ln(nid) : NULL;
nid = SSL_CIPHER_get_kx_nid(cipher);
kx = nid != NID_undef ? OBJ_nid2ln(nid) : NULL;
nid = SSL_CIPHER_get_auth_nid(cipher);
auth = nid != NID_undef ? OBJ_nid2ln(nid) : NULL;
#endif
return Py_BuildValue(
"{sksssssssisi"
#if OPENSSL_VERSION_1_1
"sOssssssss"
#endif
"}",
"id", cipher_id,
"name", cipher_name,
"protocol", cipher_protocol,
"description", buf,
"strength_bits", strength_bits,
"alg_bits", alg_bits
#if OPENSSL_VERSION_1_1
,"aead", aead ? Py_True : Py_False,
"symmetric", skcipher,
"digest", digest,
"kea", kx,
"auth", auth
#endif
);
}
#endif
/*[clinic input]
_ssl._SSLSocket.shared_ciphers
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_shared_ciphers_impl(PySSLSocket *self)
/*[clinic end generated code: output=3d174ead2e42c4fd input=0bfe149da8fe6306]*/
{
STACK_OF(SSL_CIPHER) *ciphers;
int i;
PyObject *res;
ciphers = SSL_get_ciphers(self->ssl);
if (!ciphers)
Py_RETURN_NONE;
res = PyList_New(sk_SSL_CIPHER_num(ciphers));
if (!res)
return NULL;
for (i = 0; i < sk_SSL_CIPHER_num(ciphers); i++) {
PyObject *tup = cipher_to_tuple(sk_SSL_CIPHER_value(ciphers, i));
if (!tup) {
Py_DECREF(res);
return NULL;
}
PyList_SET_ITEM(res, i, tup);
}
return res;
}
/*[clinic input]
_ssl._SSLSocket.cipher
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_cipher_impl(PySSLSocket *self)
/*[clinic end generated code: output=376417c16d0e5815 input=548fb0e27243796d]*/
{
const SSL_CIPHER *current;
if (self->ssl == NULL)
Py_RETURN_NONE;
current = SSL_get_current_cipher(self->ssl);
if (current == NULL)
Py_RETURN_NONE;
return cipher_to_tuple(current);
}
/*[clinic input]
_ssl._SSLSocket.version
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_version_impl(PySSLSocket *self)
/*[clinic end generated code: output=178aed33193b2cdb input=900186a503436fd6]*/
{
const char *version;
if (self->ssl == NULL)
Py_RETURN_NONE;
if (!SSL_is_init_finished(self->ssl)) {
/* handshake not finished */
Py_RETURN_NONE;
}
version = SSL_get_version(self->ssl);
if (!strcmp(version, "unknown"))
Py_RETURN_NONE;
return PyUnicode_FromString(version);
}
#if HAVE_NPN
/*[clinic input]
_ssl._SSLSocket.selected_npn_protocol
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_selected_npn_protocol_impl(PySSLSocket *self)
/*[clinic end generated code: output=b91d494cd207ecf6 input=c28fde139204b826]*/
{
const unsigned char *out;
unsigned int outlen;
SSL_get0_next_proto_negotiated(self->ssl,
&out, &outlen);
if (out == NULL)
Py_RETURN_NONE;
return PyUnicode_FromStringAndSize((char *)out, outlen);
}
#endif
#if HAVE_ALPN
/*[clinic input]
_ssl._SSLSocket.selected_alpn_protocol
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_selected_alpn_protocol_impl(PySSLSocket *self)
/*[clinic end generated code: output=ec33688b303d250f input=442de30e35bc2913]*/
{
const unsigned char *out;
unsigned int outlen;
SSL_get0_alpn_selected(self->ssl, &out, &outlen);
if (out == NULL)
Py_RETURN_NONE;
return PyUnicode_FromStringAndSize((char *)out, outlen);
}
#endif
/*[clinic input]
_ssl._SSLSocket.compression
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_compression_impl(PySSLSocket *self)
/*[clinic end generated code: output=bd16cb1bb4646ae7 input=5d059d0a2bbc32c8]*/
{
#ifdef OPENSSL_NO_COMP
Py_RETURN_NONE;
#else
const COMP_METHOD *comp_method;
const char *short_name;
if (self->ssl == NULL)
Py_RETURN_NONE;
comp_method = SSL_get_current_compression(self->ssl);
if (comp_method == NULL || COMP_get_type(comp_method) == NID_undef)
Py_RETURN_NONE;
short_name = OBJ_nid2sn(COMP_get_type(comp_method));
if (short_name == NULL)
Py_RETURN_NONE;
return PyUnicode_DecodeFSDefault(short_name);
#endif
}
static PySSLContext *PySSL_get_context(PySSLSocket *self, void *closure) {
Py_INCREF(self->ctx);
return self->ctx;
}
static int PySSL_set_context(PySSLSocket *self, PyObject *value,
void *closure) {
if (PyObject_TypeCheck(value, &PySSLContext_Type)) {
#if !HAVE_SNI
PyErr_SetString(PyExc_NotImplementedError, "setting a socket's "
"context is not supported by your OpenSSL library");
return -1;
#else
Py_INCREF(value);
Py_SETREF(self->ctx, (PySSLContext *)value);
SSL_set_SSL_CTX(self->ssl, self->ctx->ctx);
#endif
} else {
PyErr_SetString(PyExc_TypeError, "The value must be a SSLContext");
return -1;
}
return 0;
}
PyDoc_STRVAR(PySSL_set_context_doc,
"_setter_context(ctx)\n\
\
This changes the context associated with the SSLSocket. This is typically\n\
used from within a callback function set by the sni_callback\n\
on the SSLContext to change the certificate information associated with the\n\
SSLSocket before the cryptographic exchange handshake messages\n");
static PyObject *
PySSL_get_server_side(PySSLSocket *self, void *c)
{
return PyBool_FromLong(self->socket_type == PY_SSL_SERVER);
}
PyDoc_STRVAR(PySSL_get_server_side_doc,
"Whether this is a server-side socket.");
static PyObject *
PySSL_get_server_hostname(PySSLSocket *self, void *c)
{
if (self->server_hostname == NULL)
Py_RETURN_NONE;
Py_INCREF(self->server_hostname);
return self->server_hostname;
}
PyDoc_STRVAR(PySSL_get_server_hostname_doc,
"The currently set server hostname (for SNI).");
static PyObject *
PySSL_get_owner(PySSLSocket *self, void *c)
{
PyObject *owner;
if (self->owner == NULL)
Py_RETURN_NONE;
owner = PyWeakref_GetObject(self->owner);
Py_INCREF(owner);
return owner;
}
static int
PySSL_set_owner(PySSLSocket *self, PyObject *value, void *c)
{
Py_XSETREF(self->owner, PyWeakref_NewRef(value, NULL));
if (self->owner == NULL)
return -1;
return 0;
}
PyDoc_STRVAR(PySSL_get_owner_doc,
"The Python-level owner of this object.\
Passed as \"self\" in servername callback.");
static int
PySSL_traverse(PySSLSocket *self, visitproc visit, void *arg)
{
Py_VISIT(self->exc_type);
Py_VISIT(self->exc_value);
Py_VISIT(self->exc_tb);
return 0;
}
static int
PySSL_clear(PySSLSocket *self)
{
Py_CLEAR(self->exc_type);
Py_CLEAR(self->exc_value);
Py_CLEAR(self->exc_tb);
return 0;
}
static void
PySSL_dealloc(PySSLSocket *self)
{
if (self->ssl)
SSL_free(self->ssl);
Py_XDECREF(self->Socket);
Py_XDECREF(self->ctx);
Py_XDECREF(self->server_hostname);
Py_XDECREF(self->owner);
PyObject_Del(self);
}
/* If the socket has a timeout, do a select()/poll() on the socket.
The argument writing indicates the direction.
Returns one of the possibilities in the timeout_state enum (above).
*/
static int
PySSL_select(PySocketSockObject *s, int writing, _PyTime_t timeout)
{
int rc;
#ifdef HAVE_POLL
struct pollfd pollfd;
_PyTime_t ms;
#else
int nfds;
fd_set fds;
struct timeval tv;
#endif
/* Nothing to do unless we're in timeout mode (not non-blocking) */
if ((s == NULL) || (timeout == 0))
return SOCKET_IS_NONBLOCKING;
else if (timeout < 0) {
if (s->sock_timeout > 0)
return SOCKET_HAS_TIMED_OUT;
else
return SOCKET_IS_BLOCKING;
}
/* Guard against closed socket */
if (s->sock_fd == INVALID_SOCKET)
return SOCKET_HAS_BEEN_CLOSED;
/* Prefer poll, if available, since you can poll() any fd
* which can't be done with select(). */
#ifdef HAVE_POLL
pollfd.fd = s->sock_fd;
pollfd.events = writing ? POLLOUT : POLLIN;
/* timeout is in seconds, poll() uses milliseconds */
ms = (int)_PyTime_AsMilliseconds(timeout, _PyTime_ROUND_CEILING);
assert(ms <= INT_MAX);
PySSL_BEGIN_ALLOW_THREADS
rc = poll(&pollfd, 1, (int)ms);
PySSL_END_ALLOW_THREADS
#else
/* Guard against socket too large for select*/
if (!_PyIsSelectable_fd(s->sock_fd))
return SOCKET_TOO_LARGE_FOR_SELECT;
_PyTime_AsTimeval_noraise(timeout, &tv, _PyTime_ROUND_CEILING);
FD_ZERO(&fds);
FD_SET(s->sock_fd, &fds);
/* Wait until the socket becomes ready */
PySSL_BEGIN_ALLOW_THREADS
nfds = Py_SAFE_DOWNCAST(s->sock_fd+1, SOCKET_T, int);
if (writing)
rc = select(nfds, NULL, &fds, NULL, &tv);
else
rc = select(nfds, &fds, NULL, NULL, &tv);
PySSL_END_ALLOW_THREADS
#endif
/* Return SOCKET_TIMED_OUT on timeout, SOCKET_OPERATION_OK otherwise
(when we are able to write or when there's something to read) */
return rc == 0 ? SOCKET_HAS_TIMED_OUT : SOCKET_OPERATION_OK;
}
/*[clinic input]
_ssl._SSLSocket.write
b: Py_buffer
/
Writes the bytes-like object b into the SSL object.
Returns the number of bytes written.
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_write_impl(PySSLSocket *self, Py_buffer *b)
/*[clinic end generated code: output=aa7a6be5527358d8 input=77262d994fe5100a]*/
{
int len;
int sockstate;
_PySSLError err;
int nonblocking;
PySocketSockObject *sock = GET_SOCKET(self);
_PyTime_t timeout, deadline = 0;
int has_timeout;
if (sock != NULL) {
if (((PyObject*)sock) == Py_None) {
_setSSLError("Underlying socket connection gone",
PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
return NULL;
}
Py_INCREF(sock);
}
if (b->len > INT_MAX) {
PyErr_Format(PyExc_OverflowError,
"string longer than %d bytes", INT_MAX);
goto error;
}
if (sock != NULL) {
/* just in case the blocking state of the socket has been changed */
nonblocking = (sock->sock_timeout >= 0);
BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
}
timeout = GET_SOCKET_TIMEOUT(sock);
has_timeout = (timeout > 0);
if (has_timeout)
deadline = _PyTime_GetMonotonicClock() + timeout;
sockstate = PySSL_select(sock, 1, timeout);
if (sockstate == SOCKET_HAS_TIMED_OUT) {
PyErr_SetString(PySocketModule.timeout_error,
"The write operation timed out");
goto error;
} else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
PyErr_SetString(PySSLErrorObject,
"Underlying socket has been closed.");
goto error;
} else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
PyErr_SetString(PySSLErrorObject,
"Underlying socket too large for select().");
goto error;
}
do {
PySSL_BEGIN_ALLOW_THREADS
len = SSL_write(self->ssl, b->buf, (int)b->len);
err = _PySSL_errno(len <= 0, self->ssl, len);
PySSL_END_ALLOW_THREADS
self->err = err;
if (PyErr_CheckSignals())
goto error;
if (has_timeout)
timeout = deadline - _PyTime_GetMonotonicClock();
if (err.ssl == SSL_ERROR_WANT_READ) {
sockstate = PySSL_select(sock, 0, timeout);
} else if (err.ssl == SSL_ERROR_WANT_WRITE) {
sockstate = PySSL_select(sock, 1, timeout);
} else {
sockstate = SOCKET_OPERATION_OK;
}
if (sockstate == SOCKET_HAS_TIMED_OUT) {
PyErr_SetString(PySocketModule.timeout_error,
"The write operation timed out");
goto error;
} else if (sockstate == SOCKET_HAS_BEEN_CLOSED) {
PyErr_SetString(PySSLErrorObject,
"Underlying socket has been closed.");
goto error;
} else if (sockstate == SOCKET_IS_NONBLOCKING) {
break;
}
} while (err.ssl == SSL_ERROR_WANT_READ ||
err.ssl == SSL_ERROR_WANT_WRITE);
Py_XDECREF(sock);
if (len <= 0)
return PySSL_SetError(self, len, __FILE__, __LINE__);
if (PySSL_ChainExceptions(self) < 0)
return NULL;
return PyLong_FromLong(len);
error:
Py_XDECREF(sock);
PySSL_ChainExceptions(self);
return NULL;
}
/*[clinic input]
_ssl._SSLSocket.pending
Returns the number of already decrypted bytes available for read, pending on the connection.
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_pending_impl(PySSLSocket *self)
/*[clinic end generated code: output=983d9fecdc308a83 input=2b77487d6dfd597f]*/
{
int count = 0;
_PySSLError err;
PySSL_BEGIN_ALLOW_THREADS
count = SSL_pending(self->ssl);
err = _PySSL_errno(count < 0, self->ssl, count);
PySSL_END_ALLOW_THREADS
self->err = err;
if (count < 0)
return PySSL_SetError(self, count, __FILE__, __LINE__);
else
return PyLong_FromLong(count);
}
/*[clinic input]
_ssl._SSLSocket.read
size as len: int
[
buffer: Py_buffer(accept={rwbuffer})
]
/
Read up to size bytes from the SSL socket.
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_read_impl(PySSLSocket *self, int len, int group_right_1,
Py_buffer *buffer)
/*[clinic end generated code: output=00097776cec2a0af input=ff157eb918d0905b]*/
{
PyObject *dest = NULL;
char *mem;
int count;
int sockstate;
_PySSLError err;
int nonblocking;
PySocketSockObject *sock = GET_SOCKET(self);
_PyTime_t timeout, deadline = 0;
int has_timeout;
if (!group_right_1 && len < 0) {
PyErr_SetString(PyExc_ValueError, "size should not be negative");
return NULL;
}
if (sock != NULL) {
if (((PyObject*)sock) == Py_None) {
_setSSLError("Underlying socket connection gone",
PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
return NULL;
}
Py_INCREF(sock);
}
if (!group_right_1) {
dest = PyBytes_FromStringAndSize(NULL, len);
if (dest == NULL)
goto error;
if (len == 0) {
Py_XDECREF(sock);
return dest;
}
mem = PyBytes_AS_STRING(dest);
}
else {
mem = buffer->buf;
if (len <= 0 || len > buffer->len) {
len = (int) buffer->len;
if (buffer->len != len) {
PyErr_SetString(PyExc_OverflowError,
"maximum length can't fit in a C 'int'");
goto error;
}
if (len == 0) {
count = 0;
goto done;
}
}
}
if (sock != NULL) {
/* just in case the blocking state of the socket has been changed */
nonblocking = (sock->sock_timeout >= 0);
BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
}
timeout = GET_SOCKET_TIMEOUT(sock);
has_timeout = (timeout > 0);
if (has_timeout)
deadline = _PyTime_GetMonotonicClock() + timeout;
do {
PySSL_BEGIN_ALLOW_THREADS
count = SSL_read(self->ssl, mem, len);
err = _PySSL_errno(count <= 0, self->ssl, count);
PySSL_END_ALLOW_THREADS
self->err = err;
if (PyErr_CheckSignals())
goto error;
if (has_timeout)
timeout = deadline - _PyTime_GetMonotonicClock();
if (err.ssl == SSL_ERROR_WANT_READ) {
sockstate = PySSL_select(sock, 0, timeout);
} else if (err.ssl == SSL_ERROR_WANT_WRITE) {
sockstate = PySSL_select(sock, 1, timeout);
} else if (err.ssl == SSL_ERROR_ZERO_RETURN &&
SSL_get_shutdown(self->ssl) == SSL_RECEIVED_SHUTDOWN)
{
count = 0;
goto done;
}
else
sockstate = SOCKET_OPERATION_OK;
if (sockstate == SOCKET_HAS_TIMED_OUT) {
PyErr_SetString(PySocketModule.timeout_error,
"The read operation timed out");
goto error;
} else if (sockstate == SOCKET_IS_NONBLOCKING) {
break;
}
} while (err.ssl == SSL_ERROR_WANT_READ ||
err.ssl == SSL_ERROR_WANT_WRITE);
if (count <= 0) {
PySSL_SetError(self, count, __FILE__, __LINE__);
goto error;
}
if (self->exc_type != NULL)
goto error;
done:
Py_XDECREF(sock);
if (!group_right_1) {
_PyBytes_Resize(&dest, count);
return dest;
}
else {
return PyLong_FromLong(count);
}
error:
PySSL_ChainExceptions(self);
Py_XDECREF(sock);
if (!group_right_1)
Py_XDECREF(dest);
return NULL;
}
/*[clinic input]
_ssl._SSLSocket.shutdown
Does the SSL shutdown handshake with the remote end.
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_shutdown_impl(PySSLSocket *self)
/*[clinic end generated code: output=ca1aa7ed9d25ca42 input=11d39e69b0a2bf4a]*/
{
_PySSLError err;
int sockstate, nonblocking, ret;
int zeros = 0;
PySocketSockObject *sock = GET_SOCKET(self);
_PyTime_t timeout, deadline = 0;
int has_timeout;
if (sock != NULL) {
/* Guard against closed socket */
if ((((PyObject*)sock) == Py_None) || (sock->sock_fd == INVALID_SOCKET)) {
_setSSLError("Underlying socket connection gone",
PY_SSL_ERROR_NO_SOCKET, __FILE__, __LINE__);
return NULL;
}
Py_INCREF(sock);
/* Just in case the blocking state of the socket has been changed */
nonblocking = (sock->sock_timeout >= 0);
BIO_set_nbio(SSL_get_rbio(self->ssl), nonblocking);
BIO_set_nbio(SSL_get_wbio(self->ssl), nonblocking);
}
timeout = GET_SOCKET_TIMEOUT(sock);
has_timeout = (timeout > 0);
if (has_timeout)
deadline = _PyTime_GetMonotonicClock() + timeout;
while (1) {
PySSL_BEGIN_ALLOW_THREADS
/* Disable read-ahead so that unwrap can work correctly.
* Otherwise OpenSSL might read in too much data,
* eating clear text data that happens to be
* transmitted after the SSL shutdown.
* Should be safe to call repeatedly every time this
* function is used and the shutdown_seen_zero != 0
* condition is met.
*/
if (self->shutdown_seen_zero)
SSL_set_read_ahead(self->ssl, 0);
ret = SSL_shutdown(self->ssl);
err = _PySSL_errno(ret < 0, self->ssl, ret);
PySSL_END_ALLOW_THREADS
self->err = err;
/* If err == 1, a secure shutdown with SSL_shutdown() is complete */
if (ret > 0)
break;
if (ret == 0) {
/* Don't loop endlessly; instead preserve legacy
behaviour of trying SSL_shutdown() only twice.
This looks necessary for OpenSSL < 0.9.8m */
if (++zeros > 1)
break;
/* Shutdown was sent, now try receiving */
self->shutdown_seen_zero = 1;
continue;
}
if (has_timeout)
timeout = deadline - _PyTime_GetMonotonicClock();
/* Possibly retry shutdown until timeout or failure */
if (err.ssl == SSL_ERROR_WANT_READ)
sockstate = PySSL_select(sock, 0, timeout);
else if (err.ssl == SSL_ERROR_WANT_WRITE)
sockstate = PySSL_select(sock, 1, timeout);
else
break;
if (sockstate == SOCKET_HAS_TIMED_OUT) {
if (err.ssl == SSL_ERROR_WANT_READ)
PyErr_SetString(PySocketModule.timeout_error,
"The read operation timed out");
else
PyErr_SetString(PySocketModule.timeout_error,
"The write operation timed out");
goto error;
}
else if (sockstate == SOCKET_TOO_LARGE_FOR_SELECT) {
PyErr_SetString(PySSLErrorObject,
"Underlying socket too large for select().");
goto error;
}
else if (sockstate != SOCKET_OPERATION_OK)
/* Retain the SSL error code */
break;
}
if (ret < 0) {
Py_XDECREF(sock);
PySSL_SetError(self, ret, __FILE__, __LINE__);
return NULL;
}
if (self->exc_type != NULL)
goto error;
if (sock)
/* It's already INCREF'ed */
return (PyObject *) sock;
else
Py_RETURN_NONE;
error:
Py_XDECREF(sock);
PySSL_ChainExceptions(self);
return NULL;
}
/*[clinic input]
_ssl._SSLSocket.get_channel_binding
cb_type: str = "tls-unique"
Get channel binding data for current connection.
Raise ValueError if the requested `cb_type` is not supported. Return bytes
of the data or None if the data is not available (e.g. before the handshake).
Only 'tls-unique' channel binding data from RFC 5929 is supported.
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_get_channel_binding_impl(PySSLSocket *self,
const char *cb_type)
/*[clinic end generated code: output=34bac9acb6a61d31 input=08b7e43b99c17d41]*/
{
char buf[PySSL_CB_MAXLEN];
size_t len;
if (strcmp(cb_type, "tls-unique") == 0) {
if (SSL_session_reused(self->ssl) ^ !self->socket_type) {
/* if session is resumed XOR we are the client */
len = SSL_get_finished(self->ssl, buf, PySSL_CB_MAXLEN);
}
else {
/* if a new session XOR we are the server */
len = SSL_get_peer_finished(self->ssl, buf, PySSL_CB_MAXLEN);
}
}
else {
PyErr_Format(
PyExc_ValueError,
"'%s' channel binding type not implemented",
cb_type
);
return NULL;
}
/* It cannot be negative in current OpenSSL version as of July 2011 */
if (len == 0)
Py_RETURN_NONE;
return PyBytes_FromStringAndSize(buf, len);
}
/*[clinic input]
_ssl._SSLSocket.verify_client_post_handshake
Initiate TLS 1.3 post-handshake authentication
[clinic start generated code]*/
static PyObject *
_ssl__SSLSocket_verify_client_post_handshake_impl(PySSLSocket *self)
/*[clinic end generated code: output=532147f3b1341425 input=6bfa874810a3d889]*/
{
#ifdef TLS1_3_VERSION
int err = SSL_verify_client_post_handshake(self->ssl);
if (err == 0)
return _setSSLError(NULL, 0, __FILE__, __LINE__);
else
Py_RETURN_NONE;
#else
PyErr_SetString(PyExc_NotImplementedError,
"Post-handshake auth is not supported by your "
"OpenSSL version.");
return NULL;
#endif
}
#ifdef OPENSSL_VERSION_1_1
static SSL_SESSION*
_ssl_session_dup(SSL_SESSION *session) {
SSL_SESSION *newsession = NULL;
int slen;
unsigned char *senc = NULL, *p;
const unsigned char *const_p;
if (session == NULL) {
PyErr_SetString(PyExc_ValueError, "Invalid session");
goto error;
}
/* get length */
slen = i2d_SSL_SESSION(session, NULL);
if (slen == 0 || slen > 0xFF00) {
PyErr_SetString(PyExc_ValueError, "i2d() failed.");
goto error;
}
if ((senc = PyMem_Malloc(slen)) == NULL) {
PyErr_NoMemory();
goto error;
}
p = senc;
if (!i2d_SSL_SESSION(session, &p)) {
PyErr_SetString(PyExc_ValueError, "i2d() failed.");
goto error;
}
const_p = senc;
newsession = d2i_SSL_SESSION(NULL, &const_p, slen);
if (session == NULL) {
goto error;
}
PyMem_Free(senc);
return newsession;
error:
if (senc != NULL) {
PyMem_Free(senc);
}
return NULL;
}
#endif
static PyObject *
PySSL_get_session(PySSLSocket *self, void *closure) {
/* get_session can return sessions from a server-side connection,
* it does not check for handshake done or client socket. */
PySSLSession *pysess;
SSL_SESSION *session;
#ifdef OPENSSL_VERSION_1_1
/* duplicate session as workaround for session bug in OpenSSL 1.1.0,
* https://github.com/openssl/openssl/issues/1550 */
session = SSL_get0_session(self->ssl); /* borrowed reference */
if (session == NULL) {
Py_RETURN_NONE;
}
if ((session = _ssl_session_dup(session)) == NULL) {
return NULL;
}
#else
session = SSL_get1_session(self->ssl);
if (session == NULL) {
Py_RETURN_NONE;
}
#endif
pysess = PyObject_GC_New(PySSLSession, &PySSLSession_Type);
if (pysess == NULL) {
SSL_SESSION_free(session);
return NULL;
}
assert(self->ctx);
pysess->ctx = self->ctx;
Py_INCREF(pysess->ctx);
pysess->session = session;
PyObject_GC_Track(pysess);
return (PyObject *)pysess;
}
static int PySSL_set_session(PySSLSocket *self, PyObject *value,
void *closure)
{
PySSLSession *pysess;
#ifdef OPENSSL_VERSION_1_1
SSL_SESSION *session;
#endif
int result;
if (!PySSLSession_Check(value)) {
PyErr_SetString(PyExc_TypeError, "Value is not a SSLSession.");
return -1;
}
pysess = (PySSLSession *)value;
if (self->ctx->ctx != pysess->ctx->ctx) {
PyErr_SetString(PyExc_ValueError,
"Session refers to a different SSLContext.");
return -1;
}
if (self->socket_type != PY_SSL_CLIENT) {
PyErr_SetString(PyExc_ValueError,
"Cannot set session for server-side SSLSocket.");
return -1;
}
if (SSL_is_init_finished(self->ssl)) {
PyErr_SetString(PyExc_ValueError,
"Cannot set session after handshake.");
return -1;
}
#ifdef OPENSSL_VERSION_1_1
/* duplicate session */
if ((session = _ssl_session_dup(pysess->session)) == NULL) {
return -1;
}
result = SSL_set_session(self->ssl, session);
/* free duplicate, SSL_set_session() bumps ref count */
SSL_SESSION_free(session);
#else
result = SSL_set_session(self->ssl, pysess->session);
#endif
if (result == 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return -1;
}
return 0;
}
PyDoc_STRVAR(PySSL_set_session_doc,
"_setter_session(session)\n\
\
Get / set SSLSession.");
static PyObject *
PySSL_get_session_reused(PySSLSocket *self, void *closure) {
if (SSL_session_reused(self->ssl)) {
Py_RETURN_TRUE;
} else {
Py_RETURN_FALSE;
}
}
PyDoc_STRVAR(PySSL_get_session_reused_doc,
"Was the client session reused during handshake?");
static PyGetSetDef ssl_getsetlist[] = {
{"context", (getter) PySSL_get_context,
(setter) PySSL_set_context, PySSL_set_context_doc},
{"server_side", (getter) PySSL_get_server_side, NULL,
PySSL_get_server_side_doc},
{"server_hostname", (getter) PySSL_get_server_hostname, NULL,
PySSL_get_server_hostname_doc},
{"owner", (getter) PySSL_get_owner, (setter) PySSL_set_owner,
PySSL_get_owner_doc},
{"session", (getter) PySSL_get_session,
(setter) PySSL_set_session, PySSL_set_session_doc},
{"session_reused", (getter) PySSL_get_session_reused, NULL,
PySSL_get_session_reused_doc},
{NULL}, /* sentinel */
};
static PyMethodDef PySSLMethods[] = {
_SSL__SSLSOCKET_DO_HANDSHAKE_METHODDEF
_SSL__SSLSOCKET_WRITE_METHODDEF
_SSL__SSLSOCKET_READ_METHODDEF
_SSL__SSLSOCKET_PENDING_METHODDEF
_SSL__SSLSOCKET_GETPEERCERT_METHODDEF
_SSL__SSLSOCKET_GET_CHANNEL_BINDING_METHODDEF
_SSL__SSLSOCKET_CIPHER_METHODDEF
_SSL__SSLSOCKET_SHARED_CIPHERS_METHODDEF
_SSL__SSLSOCKET_VERSION_METHODDEF
_SSL__SSLSOCKET_SELECTED_NPN_PROTOCOL_METHODDEF
_SSL__SSLSOCKET_SELECTED_ALPN_PROTOCOL_METHODDEF
_SSL__SSLSOCKET_COMPRESSION_METHODDEF
_SSL__SSLSOCKET_SHUTDOWN_METHODDEF
_SSL__SSLSOCKET_VERIFY_CLIENT_POST_HANDSHAKE_METHODDEF
{NULL, NULL}
};
static PyTypeObject PySSLSocket_Type = {
PyVarObject_HEAD_INIT(NULL, 0)
"_ssl._SSLSocket", /*tp_name*/
sizeof(PySSLSocket), /*tp_basicsize*/
0, /*tp_itemsize*/
/* methods */
(destructor)PySSL_dealloc, /*tp_dealloc*/
0, /*tp_vectorcall_offset*/
0, /*tp_getattr*/
0, /*tp_setattr*/
0, /*tp_as_async*/
0, /*tp_repr*/
0, /*tp_as_number*/
0, /*tp_as_sequence*/
0, /*tp_as_mapping*/
0, /*tp_hash*/
0, /*tp_call*/
0, /*tp_str*/
0, /*tp_getattro*/
0, /*tp_setattro*/
0, /*tp_as_buffer*/
Py_TPFLAGS_DEFAULT, /*tp_flags*/
0, /*tp_doc*/
(traverseproc) PySSL_traverse, /*tp_traverse*/
(inquiry) PySSL_clear, /*tp_clear*/
0, /*tp_richcompare*/
0, /*tp_weaklistoffset*/
0, /*tp_iter*/
0, /*tp_iternext*/
PySSLMethods, /*tp_methods*/
0, /*tp_members*/
ssl_getsetlist, /*tp_getset*/
};
/*
* _SSLContext objects
*/
static int
_set_verify_mode(PySSLContext *self, enum py_ssl_cert_requirements n)
{
int mode;
int (*verify_cb)(int, X509_STORE_CTX *) = NULL;
switch(n) {
case PY_SSL_CERT_NONE:
mode = SSL_VERIFY_NONE;
break;
case PY_SSL_CERT_OPTIONAL:
mode = SSL_VERIFY_PEER;
break;
case PY_SSL_CERT_REQUIRED:
mode = SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT;
break;
default:
PyErr_SetString(PyExc_ValueError,
"invalid value for verify_mode");
return -1;
}
/* bpo-37428: newPySSLSocket() sets SSL_VERIFY_POST_HANDSHAKE flag for
* server sockets and SSL_set_post_handshake_auth() for client. */
/* keep current verify cb */
verify_cb = SSL_CTX_get_verify_callback(self->ctx);
SSL_CTX_set_verify(self->ctx, mode, verify_cb);
return 0;
}
/*[clinic input]
@classmethod
_ssl._SSLContext.__new__
protocol as proto_version: int
/
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_impl(PyTypeObject *type, int proto_version)
/*[clinic end generated code: output=2cf0d7a0741b6bd1 input=8d58a805b95fc534]*/
{
PySSLContext *self;
long options;
SSL_CTX *ctx = NULL;
X509_VERIFY_PARAM *params;
int result;
#if defined(SSL_MODE_RELEASE_BUFFERS)
unsigned long libver;
#endif
PySSL_BEGIN_ALLOW_THREADS
if (proto_version == PY_SSL_VERSION_TLS1)
ctx = SSL_CTX_new(TLSv1_method());
#if HAVE_TLSv1_2
else if (proto_version == PY_SSL_VERSION_TLS1_1)
ctx = SSL_CTX_new(TLSv1_1_method());
else if (proto_version == PY_SSL_VERSION_TLS1_2)
ctx = SSL_CTX_new(TLSv1_2_method());
#endif
#ifndef OPENSSL_NO_SSL3
else if (proto_version == PY_SSL_VERSION_SSL3)
ctx = SSL_CTX_new(SSLv3_method());
#endif
#ifndef OPENSSL_NO_SSL2
else if (proto_version == PY_SSL_VERSION_SSL2)
ctx = SSL_CTX_new(SSLv2_method());
#endif
else if (proto_version == PY_SSL_VERSION_TLS) /* SSLv23 */
ctx = SSL_CTX_new(TLS_method());
else if (proto_version == PY_SSL_VERSION_TLS_CLIENT)
ctx = SSL_CTX_new(TLS_client_method());
else if (proto_version == PY_SSL_VERSION_TLS_SERVER)
ctx = SSL_CTX_new(TLS_server_method());
else
proto_version = -1;
PySSL_END_ALLOW_THREADS
if (proto_version == -1) {
PyErr_SetString(PyExc_ValueError,
"invalid protocol version");
return NULL;
}
if (ctx == NULL) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
assert(type != NULL && type->tp_alloc != NULL);
self = (PySSLContext *) type->tp_alloc(type, 0);
if (self == NULL) {
SSL_CTX_free(ctx);
return NULL;
}
self->ctx = ctx;
self->hostflags = X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS;
self->protocol = proto_version;
self->msg_cb = NULL;
#ifdef HAVE_OPENSSL_KEYLOG
self->keylog_filename = NULL;
self->keylog_bio = NULL;
#endif
#if HAVE_NPN
self->npn_protocols = NULL;
#endif
#if HAVE_ALPN
self->alpn_protocols = NULL;
#endif
#ifndef OPENSSL_NO_TLSEXT
self->set_sni_cb = NULL;
#endif
/* Don't check host name by default */
if (proto_version == PY_SSL_VERSION_TLS_CLIENT) {
self->check_hostname = 1;
if (_set_verify_mode(self, PY_SSL_CERT_REQUIRED) == -1) {
Py_DECREF(self);
return NULL;
}
} else {
self->check_hostname = 0;
if (_set_verify_mode(self, PY_SSL_CERT_NONE) == -1) {
Py_DECREF(self);
return NULL;
}
}
/* Defaults */
options = SSL_OP_ALL & ~SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS;
if (proto_version != PY_SSL_VERSION_SSL2)
options |= SSL_OP_NO_SSLv2;
if (proto_version != PY_SSL_VERSION_SSL3)
options |= SSL_OP_NO_SSLv3;
/* Minimal security flags for server and client side context.
* Client sockets ignore server-side parameters. */
#ifdef SSL_OP_NO_COMPRESSION
options |= SSL_OP_NO_COMPRESSION;
#endif
#ifdef SSL_OP_CIPHER_SERVER_PREFERENCE
options |= SSL_OP_CIPHER_SERVER_PREFERENCE;
#endif
#ifdef SSL_OP_SINGLE_DH_USE
options |= SSL_OP_SINGLE_DH_USE;
#endif
#ifdef SSL_OP_SINGLE_ECDH_USE
options |= SSL_OP_SINGLE_ECDH_USE;
#endif
SSL_CTX_set_options(self->ctx, options);
/* A bare minimum cipher list without completely broken cipher suites.
* It's far from perfect but gives users a better head start. */
if (proto_version != PY_SSL_VERSION_SSL2) {
#if PY_SSL_DEFAULT_CIPHERS == 2
/* stick to OpenSSL's default settings */
result = 1;
#else
result = SSL_CTX_set_cipher_list(ctx, PY_SSL_DEFAULT_CIPHER_STRING);
#endif
} else {
/* SSLv2 needs MD5 */
result = SSL_CTX_set_cipher_list(ctx, "HIGH:!aNULL:!eNULL");
}
if (result == 0) {
Py_DECREF(self);
ERR_clear_error();
PyErr_SetString(PySSLErrorObject,
"No cipher can be selected.");
return NULL;
}
#if defined(SSL_MODE_RELEASE_BUFFERS)
/* Set SSL_MODE_RELEASE_BUFFERS. This potentially greatly reduces memory
usage for no cost at all. However, don't do this for OpenSSL versions
between 1.0.1 and 1.0.1h or 1.0.0 and 1.0.0m, which are affected by CVE
2014-0198. I can't find exactly which beta fixed this CVE, so be
conservative and assume it wasn't fixed until release. We do this check
at runtime to avoid problems from the dynamic linker.
See #25672 for more on this. */
libver = SSLeay();
if (!(libver >= 0x10001000UL && libver < 0x1000108fUL) &&
!(libver >= 0x10000000UL && libver < 0x100000dfUL)) {
SSL_CTX_set_mode(self->ctx, SSL_MODE_RELEASE_BUFFERS);
}
#endif
#if !defined(OPENSSL_NO_ECDH) && !defined(OPENSSL_VERSION_1_1)
/* Allow automatic ECDH curve selection (on OpenSSL 1.0.2+), or use
prime256v1 by default. This is Apache mod_ssl's initialization
policy, so we should be safe. OpenSSL 1.1 has it enabled by default.
*/
#if defined(SSL_CTX_set_ecdh_auto)
SSL_CTX_set_ecdh_auto(self->ctx, 1);
#else
{
EC_KEY *key = EC_KEY_new_by_curve_name(NID_X9_62_prime256v1);
SSL_CTX_set_tmp_ecdh(self->ctx, key);
EC_KEY_free(key);
}
#endif
#endif
#define SID_CTX "Python"
SSL_CTX_set_session_id_context(self->ctx, (const unsigned char *) SID_CTX,
sizeof(SID_CTX));
#undef SID_CTX
params = SSL_CTX_get0_param(self->ctx);
#ifdef X509_V_FLAG_TRUSTED_FIRST
/* Improve trust chain building when cross-signed intermediate
certificates are present. See https://bugs.python.org/issue23476. */
X509_VERIFY_PARAM_set_flags(params, X509_V_FLAG_TRUSTED_FIRST);
#endif
X509_VERIFY_PARAM_set_hostflags(params, self->hostflags);
#ifdef TLS1_3_VERSION
self->post_handshake_auth = 0;
SSL_CTX_set_post_handshake_auth(self->ctx, self->post_handshake_auth);
#endif
return (PyObject *)self;
}
static int
context_traverse(PySSLContext *self, visitproc visit, void *arg)
{
#ifndef OPENSSL_NO_TLSEXT
Py_VISIT(self->set_sni_cb);
#endif
Py_VISIT(self->msg_cb);
return 0;
}
static int
context_clear(PySSLContext *self)
{
#ifndef OPENSSL_NO_TLSEXT
Py_CLEAR(self->set_sni_cb);
#endif
Py_CLEAR(self->msg_cb);
#ifdef HAVE_OPENSSL_KEYLOG
Py_CLEAR(self->keylog_filename);
if (self->keylog_bio != NULL) {
PySSL_BEGIN_ALLOW_THREADS
BIO_free_all(self->keylog_bio);
PySSL_END_ALLOW_THREADS
self->keylog_bio = NULL;
}
#endif
return 0;
}
static void
context_dealloc(PySSLContext *self)
{
/* bpo-31095: UnTrack is needed before calling any callbacks */
PyObject_GC_UnTrack(self);
context_clear(self);
SSL_CTX_free(self->ctx);
#if HAVE_NPN
PyMem_FREE(self->npn_protocols);
#endif
#if HAVE_ALPN
PyMem_FREE(self->alpn_protocols);
#endif
Py_TYPE(self)->tp_free(self);
}
/*[clinic input]
_ssl._SSLContext.set_ciphers
cipherlist: str
/
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_set_ciphers_impl(PySSLContext *self, const char *cipherlist)
/*[clinic end generated code: output=3a3162f3557c0f3f input=a7ac931b9f3ca7fc]*/
{
int ret = SSL_CTX_set_cipher_list(self->ctx, cipherlist);
if (ret == 0) {
/* Clearing the error queue is necessary on some OpenSSL versions,
otherwise the error will be reported again when another SSL call
is done. */
ERR_clear_error();
PyErr_SetString(PySSLErrorObject,
"No cipher can be selected.");
return NULL;
}
Py_RETURN_NONE;
}
#if OPENSSL_VERSION_NUMBER >= 0x10002000UL
/*[clinic input]
_ssl._SSLContext.get_ciphers
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_get_ciphers_impl(PySSLContext *self)
/*[clinic end generated code: output=a56e4d68a406dfc4 input=a2aadc9af89b79c5]*/
{
SSL *ssl = NULL;
STACK_OF(SSL_CIPHER) *sk = NULL;
const SSL_CIPHER *cipher;
int i=0;
PyObject *result = NULL, *dct;
ssl = SSL_new(self->ctx);
if (ssl == NULL) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto exit;
}
sk = SSL_get_ciphers(ssl);
result = PyList_New(sk_SSL_CIPHER_num(sk));
if (result == NULL) {
goto exit;
}
for (i = 0; i < sk_SSL_CIPHER_num(sk); i++) {
cipher = sk_SSL_CIPHER_value(sk, i);
dct = cipher_to_dict(cipher);
if (dct == NULL) {
Py_CLEAR(result);
goto exit;
}
PyList_SET_ITEM(result, i, dct);
}
exit:
if (ssl != NULL)
SSL_free(ssl);
return result;
}
#endif
#if HAVE_NPN || HAVE_ALPN
static int
do_protocol_selection(int alpn, unsigned char **out, unsigned char *outlen,
const unsigned char *server_protocols, unsigned int server_protocols_len,
const unsigned char *client_protocols, unsigned int client_protocols_len)
{
int ret;
if (client_protocols == NULL) {
client_protocols = (unsigned char *)"";
client_protocols_len = 0;
}
if (server_protocols == NULL) {
server_protocols = (unsigned char *)"";
server_protocols_len = 0;
}
ret = SSL_select_next_proto(out, outlen,
server_protocols, server_protocols_len,
client_protocols, client_protocols_len);
if (alpn && ret != OPENSSL_NPN_NEGOTIATED)
return SSL_TLSEXT_ERR_NOACK;
return SSL_TLSEXT_ERR_OK;
}
#endif
#if HAVE_NPN
/* this callback gets passed to SSL_CTX_set_next_protos_advertise_cb */
static int
_advertiseNPN_cb(SSL *s,
const unsigned char **data, unsigned int *len,
void *args)
{
PySSLContext *ssl_ctx = (PySSLContext *) args;
if (ssl_ctx->npn_protocols == NULL) {
*data = (unsigned char *)"";
*len = 0;
} else {
*data = ssl_ctx->npn_protocols;
*len = ssl_ctx->npn_protocols_len;
}
return SSL_TLSEXT_ERR_OK;
}
/* this callback gets passed to SSL_CTX_set_next_proto_select_cb */
static int
_selectNPN_cb(SSL *s,
unsigned char **out, unsigned char *outlen,
const unsigned char *server, unsigned int server_len,
void *args)
{
PySSLContext *ctx = (PySSLContext *)args;
return do_protocol_selection(0, out, outlen, server, server_len,
ctx->npn_protocols, ctx->npn_protocols_len);
}
#endif
/*[clinic input]
_ssl._SSLContext._set_npn_protocols
protos: Py_buffer
/
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext__set_npn_protocols_impl(PySSLContext *self,
Py_buffer *protos)
/*[clinic end generated code: output=72b002c3324390c6 input=319fcb66abf95bd7]*/
{
#if HAVE_NPN
PyMem_Free(self->npn_protocols);
self->npn_protocols = PyMem_Malloc(protos->len);
if (self->npn_protocols == NULL)
return PyErr_NoMemory();
memcpy(self->npn_protocols, protos->buf, protos->len);
self->npn_protocols_len = (int) protos->len;
/* set both server and client callbacks, because the context can
* be used to create both types of sockets */
SSL_CTX_set_next_protos_advertised_cb(self->ctx,
_advertiseNPN_cb,
self);
SSL_CTX_set_next_proto_select_cb(self->ctx,
_selectNPN_cb,
self);
Py_RETURN_NONE;
#else
PyErr_SetString(PyExc_NotImplementedError,
"The NPN extension requires OpenSSL 1.0.1 or later.");
return NULL;
#endif
}
#if HAVE_ALPN
static int
_selectALPN_cb(SSL *s,
const unsigned char **out, unsigned char *outlen,
const unsigned char *client_protocols, unsigned int client_protocols_len,
void *args)
{
PySSLContext *ctx = (PySSLContext *)args;
return do_protocol_selection(1, (unsigned char **)out, outlen,
ctx->alpn_protocols, ctx->alpn_protocols_len,
client_protocols, client_protocols_len);
}
#endif
/*[clinic input]
_ssl._SSLContext._set_alpn_protocols
protos: Py_buffer
/
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext__set_alpn_protocols_impl(PySSLContext *self,
Py_buffer *protos)
/*[clinic end generated code: output=87599a7f76651a9b input=9bba964595d519be]*/
{
#if HAVE_ALPN
if ((size_t)protos->len > UINT_MAX) {
PyErr_Format(PyExc_OverflowError,
"protocols longer than %u bytes", UINT_MAX);
return NULL;
}
PyMem_FREE(self->alpn_protocols);
self->alpn_protocols = PyMem_Malloc(protos->len);
if (!self->alpn_protocols)
return PyErr_NoMemory();
memcpy(self->alpn_protocols, protos->buf, protos->len);
self->alpn_protocols_len = (unsigned int)protos->len;
if (SSL_CTX_set_alpn_protos(self->ctx, self->alpn_protocols, self->alpn_protocols_len))
return PyErr_NoMemory();
SSL_CTX_set_alpn_select_cb(self->ctx, _selectALPN_cb, self);
Py_RETURN_NONE;
#else
PyErr_SetString(PyExc_NotImplementedError,
"The ALPN extension requires OpenSSL 1.0.2 or later.");
return NULL;
#endif
}
static PyObject *
get_verify_mode(PySSLContext *self, void *c)
{
/* ignore SSL_VERIFY_CLIENT_ONCE and SSL_VERIFY_POST_HANDSHAKE */
int mask = (SSL_VERIFY_NONE | SSL_VERIFY_PEER |
SSL_VERIFY_FAIL_IF_NO_PEER_CERT);
switch (SSL_CTX_get_verify_mode(self->ctx) & mask) {
case SSL_VERIFY_NONE:
return PyLong_FromLong(PY_SSL_CERT_NONE);
case SSL_VERIFY_PEER:
return PyLong_FromLong(PY_SSL_CERT_OPTIONAL);
case SSL_VERIFY_PEER | SSL_VERIFY_FAIL_IF_NO_PEER_CERT:
return PyLong_FromLong(PY_SSL_CERT_REQUIRED);
}
PyErr_SetString(PySSLErrorObject,
"invalid return value from SSL_CTX_get_verify_mode");
return NULL;
}
static int
set_verify_mode(PySSLContext *self, PyObject *arg, void *c)
{
int n;
if (!PyArg_Parse(arg, "i", &n))
return -1;
if (n == PY_SSL_CERT_NONE && self->check_hostname) {
PyErr_SetString(PyExc_ValueError,
"Cannot set verify_mode to CERT_NONE when "
"check_hostname is enabled.");
return -1;
}
return _set_verify_mode(self, n);
}
static PyObject *
get_verify_flags(PySSLContext *self, void *c)
{
X509_VERIFY_PARAM *param;
unsigned long flags;
param = SSL_CTX_get0_param(self->ctx);
flags = X509_VERIFY_PARAM_get_flags(param);
return PyLong_FromUnsignedLong(flags);
}
static int
set_verify_flags(PySSLContext *self, PyObject *arg, void *c)
{
X509_VERIFY_PARAM *param;
unsigned long new_flags, flags, set, clear;
if (!PyArg_Parse(arg, "k", &new_flags))
return -1;
param = SSL_CTX_get0_param(self->ctx);
flags = X509_VERIFY_PARAM_get_flags(param);
clear = flags & ~new_flags;
set = ~flags & new_flags;
if (clear) {
if (!X509_VERIFY_PARAM_clear_flags(param, clear)) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return -1;
}
}
if (set) {
if (!X509_VERIFY_PARAM_set_flags(param, set)) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return -1;
}
}
return 0;
}
/* Getter and setter for protocol version */
#if defined(SSL_CTRL_GET_MAX_PROTO_VERSION)
static int
set_min_max_proto_version(PySSLContext *self, PyObject *arg, int what)
{
long v;
int result;
if (!PyArg_Parse(arg, "l", &v))
return -1;
if (v > INT_MAX) {
PyErr_SetString(PyExc_OverflowError, "Option is too long");
return -1;
}
switch(self->protocol) {
case PY_SSL_VERSION_TLS_CLIENT: /* fall through */
case PY_SSL_VERSION_TLS_SERVER: /* fall through */
case PY_SSL_VERSION_TLS:
break;
default:
PyErr_SetString(
PyExc_ValueError,
"The context's protocol doesn't support modification of "
"highest and lowest version."
);
return -1;
}
if (what == 0) {
switch(v) {
case PY_PROTO_MINIMUM_SUPPORTED:
v = 0;
break;
case PY_PROTO_MAXIMUM_SUPPORTED:
/* Emulate max for set_min_proto_version */
v = PY_PROTO_MAXIMUM_AVAILABLE;
break;
default:
break;
}
result = SSL_CTX_set_min_proto_version(self->ctx, v);
}
else {
switch(v) {
case PY_PROTO_MAXIMUM_SUPPORTED:
v = 0;
break;
case PY_PROTO_MINIMUM_SUPPORTED:
/* Emulate max for set_min_proto_version */
v = PY_PROTO_MINIMUM_AVAILABLE;
break;
default:
break;
}
result = SSL_CTX_set_max_proto_version(self->ctx, v);
}
if (result == 0) {
PyErr_Format(PyExc_ValueError,
"Unsupported protocol version 0x%x", v);
return -1;
}
return 0;
}
static PyObject *
get_minimum_version(PySSLContext *self, void *c)
{
int v = SSL_CTX_ctrl(self->ctx, SSL_CTRL_GET_MIN_PROTO_VERSION, 0, NULL);
if (v == 0) {
v = PY_PROTO_MINIMUM_SUPPORTED;
}
return PyLong_FromLong(v);
}
static int
set_minimum_version(PySSLContext *self, PyObject *arg, void *c)
{
return set_min_max_proto_version(self, arg, 0);
}
static PyObject *
get_maximum_version(PySSLContext *self, void *c)
{
int v = SSL_CTX_ctrl(self->ctx, SSL_CTRL_GET_MAX_PROTO_VERSION, 0, NULL);
if (v == 0) {
v = PY_PROTO_MAXIMUM_SUPPORTED;
}
return PyLong_FromLong(v);
}
static int
set_maximum_version(PySSLContext *self, PyObject *arg, void *c)
{
return set_min_max_proto_version(self, arg, 1);
}
#endif /* SSL_CTRL_GET_MAX_PROTO_VERSION */
#if (OPENSSL_VERSION_NUMBER >= 0x10101000L) && !defined(LIBRESSL_VERSION_NUMBER)
static PyObject *
get_num_tickets(PySSLContext *self, void *c)
{
return PyLong_FromSize_t(SSL_CTX_get_num_tickets(self->ctx));
}
static int
set_num_tickets(PySSLContext *self, PyObject *arg, void *c)
{
long num;
if (!PyArg_Parse(arg, "l", &num))
return -1;
if (num < 0) {
PyErr_SetString(PyExc_ValueError, "value must be non-negative");
return -1;
}
if (self->protocol != PY_SSL_VERSION_TLS_SERVER) {
PyErr_SetString(PyExc_ValueError,
"SSLContext is not a server context.");
return -1;
}
if (SSL_CTX_set_num_tickets(self->ctx, num) != 1) {
PyErr_SetString(PyExc_ValueError, "failed to set num tickets.");
return -1;
}
return 0;
}
PyDoc_STRVAR(PySSLContext_num_tickets_doc,
"Control the number of TLSv1.3 session tickets");
#endif /* OpenSSL 1.1.1 */
static PyObject *
get_options(PySSLContext *self, void *c)
{
return PyLong_FromLong(SSL_CTX_get_options(self->ctx));
}
static int
set_options(PySSLContext *self, PyObject *arg, void *c)
{
long new_opts, opts, set, clear;
if (!PyArg_Parse(arg, "l", &new_opts))
return -1;
opts = SSL_CTX_get_options(self->ctx);
clear = opts & ~new_opts;
set = ~opts & new_opts;
if (clear) {
#ifdef HAVE_SSL_CTX_CLEAR_OPTIONS
SSL_CTX_clear_options(self->ctx, clear);
#else
PyErr_SetString(PyExc_ValueError,
"can't clear options before OpenSSL 0.9.8m");
return -1;
#endif
}
if (set)
SSL_CTX_set_options(self->ctx, set);
return 0;
}
static PyObject *
get_host_flags(PySSLContext *self, void *c)
{
return PyLong_FromUnsignedLong(self->hostflags);
}
static int
set_host_flags(PySSLContext *self, PyObject *arg, void *c)
{
X509_VERIFY_PARAM *param;
unsigned int new_flags = 0;
if (!PyArg_Parse(arg, "I", &new_flags))
return -1;
param = SSL_CTX_get0_param(self->ctx);
self->hostflags = new_flags;
X509_VERIFY_PARAM_set_hostflags(param, new_flags);
return 0;
}
static PyObject *
get_check_hostname(PySSLContext *self, void *c)
{
return PyBool_FromLong(self->check_hostname);
}
static int
set_check_hostname(PySSLContext *self, PyObject *arg, void *c)
{
int check_hostname;
if (!PyArg_Parse(arg, "p", &check_hostname))
return -1;
if (check_hostname &&
SSL_CTX_get_verify_mode(self->ctx) == SSL_VERIFY_NONE) {
/* check_hostname = True sets verify_mode = CERT_REQUIRED */
if (_set_verify_mode(self, PY_SSL_CERT_REQUIRED) == -1) {
return -1;
}
}
self->check_hostname = check_hostname;
return 0;
}
static PyObject *
get_post_handshake_auth(PySSLContext *self, void *c) {
#if TLS1_3_VERSION
return PyBool_FromLong(self->post_handshake_auth);
#else
Py_RETURN_NONE;
#endif
}
#if TLS1_3_VERSION
static int
set_post_handshake_auth(PySSLContext *self, PyObject *arg, void *c) {
if (arg == NULL) {
PyErr_SetString(PyExc_AttributeError, "cannot delete attribute");
return -1;
}
int pha = PyObject_IsTrue(arg);
if (pha == -1) {
return -1;
}
self->post_handshake_auth = pha;
/* bpo-37428: newPySSLSocket() sets SSL_VERIFY_POST_HANDSHAKE flag for
* server sockets and SSL_set_post_handshake_auth() for client. */
return 0;
}
#endif
static PyObject *
get_protocol(PySSLContext *self, void *c) {
return PyLong_FromLong(self->protocol);
}
typedef struct {
PyThreadState *thread_state;
PyObject *callable;
char *password;
int size;
int error;
} _PySSLPasswordInfo;
static int
_pwinfo_set(_PySSLPasswordInfo *pw_info, PyObject* password,
const char *bad_type_error)
{
/* Set the password and size fields of a _PySSLPasswordInfo struct
from a unicode, bytes, or byte array object.
The password field will be dynamically allocated and must be freed
by the caller */
PyObject *password_bytes = NULL;
const char *data = NULL;
Py_ssize_t size;
if (PyUnicode_Check(password)) {
password_bytes = PyUnicode_AsUTF8String(password);
if (!password_bytes) {
goto error;
}
data = PyBytes_AS_STRING(password_bytes);
size = PyBytes_GET_SIZE(password_bytes);
} else if (PyBytes_Check(password)) {
data = PyBytes_AS_STRING(password);
size = PyBytes_GET_SIZE(password);
} else if (PyByteArray_Check(password)) {
data = PyByteArray_AS_STRING(password);
size = PyByteArray_GET_SIZE(password);
} else {
PyErr_SetString(PyExc_TypeError, bad_type_error);
goto error;
}
if (size > (Py_ssize_t)INT_MAX) {
PyErr_Format(PyExc_ValueError,
"password cannot be longer than %d bytes", INT_MAX);
goto error;
}
PyMem_Free(pw_info->password);
pw_info->password = PyMem_Malloc(size);
if (!pw_info->password) {
PyErr_SetString(PyExc_MemoryError,
"unable to allocate password buffer");
goto error;
}
memcpy(pw_info->password, data, size);
pw_info->size = (int)size;
Py_XDECREF(password_bytes);
return 1;
error:
Py_XDECREF(password_bytes);
return 0;
}
static int
_password_callback(char *buf, int size, int rwflag, void *userdata)
{
_PySSLPasswordInfo *pw_info = (_PySSLPasswordInfo*) userdata;
PyObject *fn_ret = NULL;
PySSL_END_ALLOW_THREADS_S(pw_info->thread_state);
if (pw_info->callable) {
fn_ret = _PyObject_CallNoArg(pw_info->callable);
if (!fn_ret) {
/* TODO: It would be nice to move _ctypes_add_traceback() into the
core python API, so we could use it to add a frame here */
goto error;
}
if (!_pwinfo_set(pw_info, fn_ret,
"password callback must return a string")) {
goto error;
}
Py_CLEAR(fn_ret);
}
if (pw_info->size > size) {
PyErr_Format(PyExc_ValueError,
"password cannot be longer than %d bytes", size);
goto error;
}
PySSL_BEGIN_ALLOW_THREADS_S(pw_info->thread_state);
memcpy(buf, pw_info->password, pw_info->size);
return pw_info->size;
error:
Py_XDECREF(fn_ret);
PySSL_BEGIN_ALLOW_THREADS_S(pw_info->thread_state);
pw_info->error = 1;
return -1;
}
/*[clinic input]
_ssl._SSLContext.load_cert_chain
certfile: object
keyfile: object = NULL
password: object = NULL
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_load_cert_chain_impl(PySSLContext *self, PyObject *certfile,
PyObject *keyfile, PyObject *password)
/*[clinic end generated code: output=9480bc1c380e2095 input=7cf9ac673cbee6fc]*/
{
PyObject *certfile_bytes = NULL, *keyfile_bytes = NULL;
pem_password_cb *orig_passwd_cb = SSL_CTX_get_default_passwd_cb(self->ctx);
void *orig_passwd_userdata = SSL_CTX_get_default_passwd_cb_userdata(self->ctx);
_PySSLPasswordInfo pw_info = { NULL, NULL, NULL, 0, 0 };
int r;
errno = 0;
ERR_clear_error();
if (keyfile == Py_None)
keyfile = NULL;
if (!PyUnicode_FSConverter(certfile, &certfile_bytes)) {
if (PyErr_ExceptionMatches(PyExc_TypeError)) {
PyErr_SetString(PyExc_TypeError,
"certfile should be a valid filesystem path");
}
return NULL;
}
if (keyfile && !PyUnicode_FSConverter(keyfile, &keyfile_bytes)) {
if (PyErr_ExceptionMatches(PyExc_TypeError)) {
PyErr_SetString(PyExc_TypeError,
"keyfile should be a valid filesystem path");
}
goto error;
}
if (password && password != Py_None) {
if (PyCallable_Check(password)) {
pw_info.callable = password;
} else if (!_pwinfo_set(&pw_info, password,
"password should be a string or callable")) {
goto error;
}
SSL_CTX_set_default_passwd_cb(self->ctx, _password_callback);
SSL_CTX_set_default_passwd_cb_userdata(self->ctx, &pw_info);
}
PySSL_BEGIN_ALLOW_THREADS_S(pw_info.thread_state);
r = SSL_CTX_use_certificate_chain_file(self->ctx,
PyBytes_AS_STRING(certfile_bytes));
PySSL_END_ALLOW_THREADS_S(pw_info.thread_state);
if (r != 1) {
if (pw_info.error) {
ERR_clear_error();
/* the password callback has already set the error information */
}
else if (errno != 0) {
ERR_clear_error();
PyErr_SetFromErrno(PyExc_OSError);
}
else {
_setSSLError(NULL, 0, __FILE__, __LINE__);
}
goto error;
}
PySSL_BEGIN_ALLOW_THREADS_S(pw_info.thread_state);
r = SSL_CTX_use_PrivateKey_file(self->ctx,
PyBytes_AS_STRING(keyfile ? keyfile_bytes : certfile_bytes),
SSL_FILETYPE_PEM);
PySSL_END_ALLOW_THREADS_S(pw_info.thread_state);
Py_CLEAR(keyfile_bytes);
Py_CLEAR(certfile_bytes);
if (r != 1) {
if (pw_info.error) {
ERR_clear_error();
/* the password callback has already set the error information */
}
else if (errno != 0) {
ERR_clear_error();
PyErr_SetFromErrno(PyExc_OSError);
}
else {
_setSSLError(NULL, 0, __FILE__, __LINE__);
}
goto error;
}
PySSL_BEGIN_ALLOW_THREADS_S(pw_info.thread_state);
r = SSL_CTX_check_private_key(self->ctx);
PySSL_END_ALLOW_THREADS_S(pw_info.thread_state);
if (r != 1) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
goto error;
}
SSL_CTX_set_default_passwd_cb(self->ctx, orig_passwd_cb);
SSL_CTX_set_default_passwd_cb_userdata(self->ctx, orig_passwd_userdata);
PyMem_Free(pw_info.password);
Py_RETURN_NONE;
error:
SSL_CTX_set_default_passwd_cb(self->ctx, orig_passwd_cb);
SSL_CTX_set_default_passwd_cb_userdata(self->ctx, orig_passwd_userdata);
PyMem_Free(pw_info.password);
Py_XDECREF(keyfile_bytes);
Py_XDECREF(certfile_bytes);
return NULL;
}
/* internal helper function, returns -1 on error
*/
static int
_add_ca_certs(PySSLContext *self, void *data, Py_ssize_t len,
int filetype)
{
BIO *biobuf = NULL;
X509_STORE *store;
int retval = 0, err, loaded = 0;
assert(filetype == SSL_FILETYPE_ASN1 || filetype == SSL_FILETYPE_PEM);
if (len <= 0) {
PyErr_SetString(PyExc_ValueError,
"Empty certificate data");
return -1;
} else if (len > INT_MAX) {
PyErr_SetString(PyExc_OverflowError,
"Certificate data is too long.");
return -1;
}
biobuf = BIO_new_mem_buf(data, (int)len);
if (biobuf == NULL) {
_setSSLError("Can't allocate buffer", 0, __FILE__, __LINE__);
return -1;
}
store = SSL_CTX_get_cert_store(self->ctx);
assert(store != NULL);
while (1) {
X509 *cert = NULL;
int r;
if (filetype == SSL_FILETYPE_ASN1) {
cert = d2i_X509_bio(biobuf, NULL);
} else {
cert = PEM_read_bio_X509(biobuf, NULL,
SSL_CTX_get_default_passwd_cb(self->ctx),
SSL_CTX_get_default_passwd_cb_userdata(self->ctx)
);
}
if (cert == NULL) {
break;
}
r = X509_STORE_add_cert(store, cert);
X509_free(cert);
if (!r) {
err = ERR_peek_last_error();
if ((ERR_GET_LIB(err) == ERR_LIB_X509) &&
(ERR_GET_REASON(err) == X509_R_CERT_ALREADY_IN_HASH_TABLE)) {
/* cert already in hash table, not an error */
ERR_clear_error();
} else {
break;
}
}
loaded++;
}
err = ERR_peek_last_error();
if ((filetype == SSL_FILETYPE_ASN1) &&
(loaded > 0) &&
(ERR_GET_LIB(err) == ERR_LIB_ASN1) &&
(ERR_GET_REASON(err) == ASN1_R_HEADER_TOO_LONG)) {
/* EOF ASN1 file, not an error */
ERR_clear_error();
retval = 0;
} else if ((filetype == SSL_FILETYPE_PEM) &&
(loaded > 0) &&
(ERR_GET_LIB(err) == ERR_LIB_PEM) &&
(ERR_GET_REASON(err) == PEM_R_NO_START_LINE)) {
/* EOF PEM file, not an error */
ERR_clear_error();
retval = 0;
} else {
_setSSLError(NULL, 0, __FILE__, __LINE__);
retval = -1;
}
BIO_free(biobuf);
return retval;
}
/*[clinic input]
_ssl._SSLContext.load_verify_locations
cafile: object = NULL
capath: object = NULL
cadata: object = NULL
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_load_verify_locations_impl(PySSLContext *self,
PyObject *cafile,
PyObject *capath,
PyObject *cadata)
/*[clinic end generated code: output=454c7e41230ca551 input=997f1fb3a784ef88]*/
{
PyObject *cafile_bytes = NULL, *capath_bytes = NULL;
const char *cafile_buf = NULL, *capath_buf = NULL;
int r = 0, ok = 1;
errno = 0;
if (cafile == Py_None)
cafile = NULL;
if (capath == Py_None)
capath = NULL;
if (cadata == Py_None)
cadata = NULL;
if (cafile == NULL && capath == NULL && cadata == NULL) {
PyErr_SetString(PyExc_TypeError,
"cafile, capath and cadata cannot be all omitted");
goto error;
}
if (cafile && !PyUnicode_FSConverter(cafile, &cafile_bytes)) {
if (PyErr_ExceptionMatches(PyExc_TypeError)) {
PyErr_SetString(PyExc_TypeError,
"cafile should be a valid filesystem path");
}
goto error;
}
if (capath && !PyUnicode_FSConverter(capath, &capath_bytes)) {
if (PyErr_ExceptionMatches(PyExc_TypeError)) {
PyErr_SetString(PyExc_TypeError,
"capath should be a valid filesystem path");
}
goto error;
}
/* validata cadata type and load cadata */
if (cadata) {
if (PyUnicode_Check(cadata)) {
PyObject *cadata_ascii = PyUnicode_AsASCIIString(cadata);
if (cadata_ascii == NULL) {
if (PyErr_ExceptionMatches(PyExc_UnicodeEncodeError)) {
goto invalid_cadata;
}
goto error;
}
r = _add_ca_certs(self,
PyBytes_AS_STRING(cadata_ascii),
PyBytes_GET_SIZE(cadata_ascii),
SSL_FILETYPE_PEM);
Py_DECREF(cadata_ascii);
if (r == -1) {
goto error;
}
}
else if (PyObject_CheckBuffer(cadata)) {
Py_buffer buf;
if (PyObject_GetBuffer(cadata, &buf, PyBUF_SIMPLE)) {
goto error;
}
if (!PyBuffer_IsContiguous(&buf, 'C') || buf.ndim > 1) {
PyBuffer_Release(&buf);
PyErr_SetString(PyExc_TypeError,
"cadata should be a contiguous buffer with "
"a single dimension");
goto error;
}
r = _add_ca_certs(self, buf.buf, buf.len, SSL_FILETYPE_ASN1);
PyBuffer_Release(&buf);
if (r == -1) {
goto error;
}
}
else {
invalid_cadata:
PyErr_SetString(PyExc_TypeError,
"cadata should be an ASCII string or a "
"bytes-like object");
goto error;
}
}
/* load cafile or capath */
if (cafile || capath) {
if (cafile)
cafile_buf = PyBytes_AS_STRING(cafile_bytes);
if (capath)
capath_buf = PyBytes_AS_STRING(capath_bytes);
PySSL_BEGIN_ALLOW_THREADS
r = SSL_CTX_load_verify_locations(self->ctx, cafile_buf, capath_buf);
PySSL_END_ALLOW_THREADS
if (r != 1) {
ok = 0;
if (errno != 0) {
ERR_clear_error();
PyErr_SetFromErrno(PyExc_OSError);
}
else {
_setSSLError(NULL, 0, __FILE__, __LINE__);
}
goto error;
}
}
goto end;
error:
ok = 0;
end:
Py_XDECREF(cafile_bytes);
Py_XDECREF(capath_bytes);
if (ok) {
Py_RETURN_NONE;
} else {
return NULL;
}
}
/*[clinic input]
_ssl._SSLContext.load_dh_params
path as filepath: object
/
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_load_dh_params(PySSLContext *self, PyObject *filepath)
/*[clinic end generated code: output=1c8e57a38e055af0 input=c8871f3c796ae1d6]*/
{
FILE *f;
DH *dh;
f = _Py_fopen_obj(filepath, "rb");
if (f == NULL)
return NULL;
errno = 0;
PySSL_BEGIN_ALLOW_THREADS
dh = PEM_read_DHparams(f, NULL, NULL, NULL);
fclose(f);
PySSL_END_ALLOW_THREADS
if (dh == NULL) {
if (errno != 0) {
ERR_clear_error();
PyErr_SetFromErrnoWithFilenameObject(PyExc_OSError, filepath);
}
else {
_setSSLError(NULL, 0, __FILE__, __LINE__);
}
return NULL;
}
if (SSL_CTX_set_tmp_dh(self->ctx, dh) == 0)
_setSSLError(NULL, 0, __FILE__, __LINE__);
DH_free(dh);
Py_RETURN_NONE;
}
/*[clinic input]
_ssl._SSLContext._wrap_socket
sock: object(subclass_of="PySocketModule.Sock_Type")
server_side: int
server_hostname as hostname_obj: object = None
*
owner: object = None
session: object = None
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext__wrap_socket_impl(PySSLContext *self, PyObject *sock,
int server_side, PyObject *hostname_obj,
PyObject *owner, PyObject *session)
/*[clinic end generated code: output=f103f238633940b4 input=957d5006183d1894]*/
{
char *hostname = NULL;
PyObject *res;
/* server_hostname is either None (or absent), or to be encoded
as IDN A-label (ASCII str) without NULL bytes. */
if (hostname_obj != Py_None) {
if (!PyArg_Parse(hostname_obj, "es", "ascii", &hostname))
return NULL;
}
res = (PyObject *) newPySSLSocket(self, (PySocketSockObject *)sock,
server_side, hostname,
owner, session,
NULL, NULL);
if (hostname != NULL)
PyMem_Free(hostname);
return res;
}
/*[clinic input]
_ssl._SSLContext._wrap_bio
incoming: object(subclass_of="&PySSLMemoryBIO_Type", type="PySSLMemoryBIO *")
outgoing: object(subclass_of="&PySSLMemoryBIO_Type", type="PySSLMemoryBIO *")
server_side: int
server_hostname as hostname_obj: object = None
*
owner: object = None
session: object = None
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext__wrap_bio_impl(PySSLContext *self, PySSLMemoryBIO *incoming,
PySSLMemoryBIO *outgoing, int server_side,
PyObject *hostname_obj, PyObject *owner,
PyObject *session)
/*[clinic end generated code: output=5c5d6d9b41f99332 input=8cf22f4d586ac56a]*/
{
char *hostname = NULL;
PyObject *res;
/* server_hostname is either None (or absent), or to be encoded
as IDN A-label (ASCII str) without NULL bytes. */
if (hostname_obj != Py_None) {
if (!PyArg_Parse(hostname_obj, "es", "ascii", &hostname))
return NULL;
}
res = (PyObject *) newPySSLSocket(self, NULL, server_side, hostname,
owner, session,
incoming, outgoing);
PyMem_Free(hostname);
return res;
}
/*[clinic input]
_ssl._SSLContext.session_stats
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_session_stats_impl(PySSLContext *self)
/*[clinic end generated code: output=0d96411c42893bfb input=7e0a81fb11102c8b]*/
{
int r;
PyObject *value, *stats = PyDict_New();
if (!stats)
return NULL;
#define ADD_STATS(SSL_NAME, KEY_NAME) \
value = PyLong_FromLong(SSL_CTX_sess_ ## SSL_NAME (self->ctx)); \
if (value == NULL) \
goto error; \
r = PyDict_SetItemString(stats, KEY_NAME, value); \
Py_DECREF(value); \
if (r < 0) \
goto error;
ADD_STATS(number, "number");
ADD_STATS(connect, "connect");
ADD_STATS(connect_good, "connect_good");
ADD_STATS(connect_renegotiate, "connect_renegotiate");
ADD_STATS(accept, "accept");
ADD_STATS(accept_good, "accept_good");
ADD_STATS(accept_renegotiate, "accept_renegotiate");
ADD_STATS(accept, "accept");
ADD_STATS(hits, "hits");
ADD_STATS(misses, "misses");
ADD_STATS(timeouts, "timeouts");
ADD_STATS(cache_full, "cache_full");
#undef ADD_STATS
return stats;
error:
Py_DECREF(stats);
return NULL;
}
/*[clinic input]
_ssl._SSLContext.set_default_verify_paths
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_set_default_verify_paths_impl(PySSLContext *self)
/*[clinic end generated code: output=0bee74e6e09deaaa input=35f3408021463d74]*/
{
if (!SSL_CTX_set_default_verify_paths(self->ctx)) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
Py_RETURN_NONE;
}
#ifndef OPENSSL_NO_ECDH
/*[clinic input]
_ssl._SSLContext.set_ecdh_curve
name: object
/
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_set_ecdh_curve(PySSLContext *self, PyObject *name)
/*[clinic end generated code: output=23022c196e40d7d2 input=c2bafb6f6e34726b]*/
{
PyObject *name_bytes;
int nid;
EC_KEY *key;
if (!PyUnicode_FSConverter(name, &name_bytes))
return NULL;
assert(PyBytes_Check(name_bytes));
nid = OBJ_sn2nid(PyBytes_AS_STRING(name_bytes));
Py_DECREF(name_bytes);
if (nid == 0) {
PyErr_Format(PyExc_ValueError,
"unknown elliptic curve name %R", name);
return NULL;
}
key = EC_KEY_new_by_curve_name(nid);
if (key == NULL) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
SSL_CTX_set_tmp_ecdh(self->ctx, key);
EC_KEY_free(key);
Py_RETURN_NONE;
}
#endif
#if HAVE_SNI && !defined(OPENSSL_NO_TLSEXT)
static int
_servername_callback(SSL *s, int *al, void *args)
{
int ret;
PySSLContext *ssl_ctx = (PySSLContext *) args;
PySSLSocket *ssl;
PyObject *result;
/* The high-level ssl.SSLSocket object */
PyObject *ssl_socket;
const char *servername = SSL_get_servername(s, TLSEXT_NAMETYPE_host_name);
PyGILState_STATE gstate = PyGILState_Ensure();
if (ssl_ctx->set_sni_cb == NULL) {
/* remove race condition in this the call back while if removing the
* callback is in progress */
PyGILState_Release(gstate);
return SSL_TLSEXT_ERR_OK;
}
ssl = SSL_get_app_data(s);
assert(PySSLSocket_Check(ssl));
/* The servername callback expects an argument that represents the current
* SSL connection and that has a .context attribute that can be changed to
* identify the requested hostname. Since the official API is the Python
* level API we want to pass the callback a Python level object rather than
* a _ssl.SSLSocket instance. If there's an "owner" (typically an
* SSLObject) that will be passed. Otherwise if there's a socket then that
* will be passed. If both do not exist only then the C-level object is
* passed. */
if (ssl->owner)
ssl_socket = PyWeakref_GetObject(ssl->owner);
else if (ssl->Socket)
ssl_socket = PyWeakref_GetObject(ssl->Socket);
else
ssl_socket = (PyObject *) ssl;
Py_INCREF(ssl_socket);
if (ssl_socket == Py_None)
goto error;
if (servername == NULL) {
result = PyObject_CallFunctionObjArgs(ssl_ctx->set_sni_cb, ssl_socket,
Py_None, ssl_ctx, NULL);
}
else {
PyObject *servername_bytes;
PyObject *servername_str;
servername_bytes = PyBytes_FromString(servername);
if (servername_bytes == NULL) {
PyErr_WriteUnraisable((PyObject *) ssl_ctx);
goto error;
}
/* server_hostname was encoded to an A-label by our caller; put it
* back into a str object, but still as an A-label (bpo-28414)
*/
servername_str = PyUnicode_FromEncodedObject(servername_bytes, "ascii", NULL);
Py_DECREF(servername_bytes);
if (servername_str == NULL) {
PyErr_WriteUnraisable(servername_bytes);
goto error;
}
result = PyObject_CallFunctionObjArgs(
ssl_ctx->set_sni_cb, ssl_socket, servername_str,
ssl_ctx, NULL);
Py_DECREF(servername_str);
}
Py_DECREF(ssl_socket);
if (result == NULL) {
PyErr_WriteUnraisable(ssl_ctx->set_sni_cb);
*al = SSL_AD_HANDSHAKE_FAILURE;
ret = SSL_TLSEXT_ERR_ALERT_FATAL;
}
else {
/* Result may be None, a SSLContext or an integer
* None and SSLContext are OK, integer or other values are an error.
*/
if (result == Py_None) {
ret = SSL_TLSEXT_ERR_OK;
} else {
*al = (int) PyLong_AsLong(result);
if (PyErr_Occurred()) {
PyErr_WriteUnraisable(result);
*al = SSL_AD_INTERNAL_ERROR;
}
ret = SSL_TLSEXT_ERR_ALERT_FATAL;
}
Py_DECREF(result);
}
PyGILState_Release(gstate);
return ret;
error:
Py_DECREF(ssl_socket);
*al = SSL_AD_INTERNAL_ERROR;
ret = SSL_TLSEXT_ERR_ALERT_FATAL;
PyGILState_Release(gstate);
return ret;
}
#endif
static PyObject *
get_sni_callback(PySSLContext *self, void *c)
{
PyObject *cb = self->set_sni_cb;
if (cb == NULL) {
Py_RETURN_NONE;
}
Py_INCREF(cb);
return cb;
}
static int
set_sni_callback(PySSLContext *self, PyObject *arg, void *c)
{
if (self->protocol == PY_SSL_VERSION_TLS_CLIENT) {
PyErr_SetString(PyExc_ValueError,
"sni_callback cannot be set on TLS_CLIENT context");
return -1;
}
#if HAVE_SNI && !defined(OPENSSL_NO_TLSEXT)
Py_CLEAR(self->set_sni_cb);
if (arg == Py_None) {
SSL_CTX_set_tlsext_servername_callback(self->ctx, NULL);
}
else {
if (!PyCallable_Check(arg)) {
SSL_CTX_set_tlsext_servername_callback(self->ctx, NULL);
PyErr_SetString(PyExc_TypeError,
"not a callable object");
return -1;
}
Py_INCREF(arg);
self->set_sni_cb = arg;
SSL_CTX_set_tlsext_servername_callback(self->ctx, _servername_callback);
SSL_CTX_set_tlsext_servername_arg(self->ctx, self);
}
return 0;
#else
PyErr_SetString(PyExc_NotImplementedError,
"The TLS extension servername callback, "
"SSL_CTX_set_tlsext_servername_callback, "
"is not in the current OpenSSL library.");
return -1;
#endif
}
PyDoc_STRVAR(PySSLContext_sni_callback_doc,
"Set a callback that will be called when a server name is provided by the SSL/TLS client in the SNI extension.\n\
\n\
If the argument is None then the callback is disabled. The method is called\n\
with the SSLSocket, the server name as a string, and the SSLContext object.\n\
See RFC 6066 for details of the SNI extension.");
/*[clinic input]
_ssl._SSLContext.cert_store_stats
Returns quantities of loaded X.509 certificates.
X.509 certificates with a CA extension and certificate revocation lists
inside the context's cert store.
NOTE: Certificates in a capath directory aren't loaded unless they have
been used at least once.
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_cert_store_stats_impl(PySSLContext *self)
/*[clinic end generated code: output=5f356f4d9cca874d input=eb40dd0f6d0e40cf]*/
{
X509_STORE *store;
STACK_OF(X509_OBJECT) *objs;
X509_OBJECT *obj;
int x509 = 0, crl = 0, ca = 0, i;
store = SSL_CTX_get_cert_store(self->ctx);
objs = X509_STORE_get0_objects(store);
for (i = 0; i < sk_X509_OBJECT_num(objs); i++) {
obj = sk_X509_OBJECT_value(objs, i);
switch (X509_OBJECT_get_type(obj)) {
case X509_LU_X509:
x509++;
if (X509_check_ca(X509_OBJECT_get0_X509(obj))) {
ca++;
}
break;
case X509_LU_CRL:
crl++;
break;
default:
/* Ignore X509_LU_FAIL, X509_LU_RETRY, X509_LU_PKEY.
* As far as I can tell they are internal states and never
* stored in a cert store */
break;
}
}
return Py_BuildValue("{sisisi}", "x509", x509, "crl", crl,
"x509_ca", ca);
}
/*[clinic input]
_ssl._SSLContext.get_ca_certs
binary_form: bool = False
Returns a list of dicts with information of loaded CA certs.
If the optional argument is True, returns a DER-encoded copy of the CA
certificate.
NOTE: Certificates in a capath directory aren't loaded unless they have
been used at least once.
[clinic start generated code]*/
static PyObject *
_ssl__SSLContext_get_ca_certs_impl(PySSLContext *self, int binary_form)
/*[clinic end generated code: output=0d58f148f37e2938 input=6887b5a09b7f9076]*/
{
X509_STORE *store;
STACK_OF(X509_OBJECT) *objs;
PyObject *ci = NULL, *rlist = NULL;
int i;
if ((rlist = PyList_New(0)) == NULL) {
return NULL;
}
store = SSL_CTX_get_cert_store(self->ctx);
objs = X509_STORE_get0_objects(store);
for (i = 0; i < sk_X509_OBJECT_num(objs); i++) {
X509_OBJECT *obj;
X509 *cert;
obj = sk_X509_OBJECT_value(objs, i);
if (X509_OBJECT_get_type(obj) != X509_LU_X509) {
/* not a x509 cert */
continue;
}
/* CA for any purpose */
cert = X509_OBJECT_get0_X509(obj);
if (!X509_check_ca(cert)) {
continue;
}
if (binary_form) {
ci = _certificate_to_der(cert);
} else {
ci = _decode_certificate(cert);
}
if (ci == NULL) {
goto error;
}
if (PyList_Append(rlist, ci) == -1) {
goto error;
}
Py_CLEAR(ci);
}
return rlist;
error:
Py_XDECREF(ci);
Py_XDECREF(rlist);
return NULL;
}
static PyGetSetDef context_getsetlist[] = {
{"check_hostname", (getter) get_check_hostname,
(setter) set_check_hostname, NULL},
{"_host_flags", (getter) get_host_flags,
(setter) set_host_flags, NULL},
#if SSL_CTRL_GET_MAX_PROTO_VERSION
{"minimum_version", (getter) get_minimum_version,
(setter) set_minimum_version, NULL},
{"maximum_version", (getter) get_maximum_version,
(setter) set_maximum_version, NULL},
#endif
#ifdef HAVE_OPENSSL_KEYLOG
{"keylog_filename", (getter) _PySSLContext_get_keylog_filename,
(setter) _PySSLContext_set_keylog_filename, NULL},
#endif
{"_msg_callback", (getter) _PySSLContext_get_msg_callback,
(setter) _PySSLContext_set_msg_callback, NULL},
{"sni_callback", (getter) get_sni_callback,
(setter) set_sni_callback, PySSLContext_sni_callback_doc},
#if (OPENSSL_VERSION_NUMBER >= 0x10101000L) && !defined(LIBRESSL_VERSION_NUMBER)
{"num_tickets", (getter) get_num_tickets,
(setter) set_num_tickets, PySSLContext_num_tickets_doc},
#endif
{"options", (getter) get_options,
(setter) set_options, NULL},
{"post_handshake_auth", (getter) get_post_handshake_auth,
#ifdef TLS1_3_VERSION
(setter) set_post_handshake_auth,
#else
NULL,
#endif
NULL},
{"protocol", (getter) get_protocol,
NULL, NULL},
{"verify_flags", (getter) get_verify_flags,
(setter) set_verify_flags, NULL},
{"verify_mode", (getter) get_verify_mode,
(setter) set_verify_mode, NULL},
{NULL}, /* sentinel */
};
static struct PyMethodDef context_methods[] = {
_SSL__SSLCONTEXT__WRAP_SOCKET_METHODDEF
_SSL__SSLCONTEXT__WRAP_BIO_METHODDEF
_SSL__SSLCONTEXT_SET_CIPHERS_METHODDEF
_SSL__SSLCONTEXT__SET_ALPN_PROTOCOLS_METHODDEF
_SSL__SSLCONTEXT__SET_NPN_PROTOCOLS_METHODDEF
_SSL__SSLCONTEXT_LOAD_CERT_CHAIN_METHODDEF
_SSL__SSLCONTEXT_LOAD_DH_PARAMS_METHODDEF
_SSL__SSLCONTEXT_LOAD_VERIFY_LOCATIONS_METHODDEF
_SSL__SSLCONTEXT_SESSION_STATS_METHODDEF
_SSL__SSLCONTEXT_SET_DEFAULT_VERIFY_PATHS_METHODDEF
_SSL__SSLCONTEXT_SET_ECDH_CURVE_METHODDEF
_SSL__SSLCONTEXT_CERT_STORE_STATS_METHODDEF
_SSL__SSLCONTEXT_GET_CA_CERTS_METHODDEF
_SSL__SSLCONTEXT_GET_CIPHERS_METHODDEF
{NULL, NULL} /* sentinel */
};
static PyTypeObject PySSLContext_Type = {
PyVarObject_HEAD_INIT(NULL, 0)
"_ssl._SSLContext", /*tp_name*/
sizeof(PySSLContext), /*tp_basicsize*/
0, /*tp_itemsize*/
(destructor)context_dealloc, /*tp_dealloc*/
0, /*tp_vectorcall_offset*/
0, /*tp_getattr*/
0, /*tp_setattr*/
0, /*tp_as_async*/
0, /*tp_repr*/
0, /*tp_as_number*/
0, /*tp_as_sequence*/
0, /*tp_as_mapping*/
0, /*tp_hash*/
0, /*tp_call*/
0, /*tp_str*/
0, /*tp_getattro*/
0, /*tp_setattro*/
0, /*tp_as_buffer*/
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_BASETYPE | Py_TPFLAGS_HAVE_GC, /*tp_flags*/
0, /*tp_doc*/
(traverseproc) context_traverse, /*tp_traverse*/
(inquiry) context_clear, /*tp_clear*/
0, /*tp_richcompare*/
0, /*tp_weaklistoffset*/
0, /*tp_iter*/
0, /*tp_iternext*/
context_methods, /*tp_methods*/
0, /*tp_members*/
context_getsetlist, /*tp_getset*/
0, /*tp_base*/
0, /*tp_dict*/
0, /*tp_descr_get*/
0, /*tp_descr_set*/
0, /*tp_dictoffset*/
0, /*tp_init*/
0, /*tp_alloc*/
_ssl__SSLContext, /*tp_new*/
};
/*
* MemoryBIO objects
*/
/*[clinic input]
@classmethod
_ssl.MemoryBIO.__new__
[clinic start generated code]*/
static PyObject *
_ssl_MemoryBIO_impl(PyTypeObject *type)
/*[clinic end generated code: output=8820a58db78330ac input=26d22e4909ecb1b5]*/
{
BIO *bio;
PySSLMemoryBIO *self;
bio = BIO_new(BIO_s_mem());
if (bio == NULL) {
PyErr_SetString(PySSLErrorObject,
"failed to allocate BIO");
return NULL;
}
/* Since our BIO is non-blocking an empty read() does not indicate EOF,
* just that no data is currently available. The SSL routines should retry
* the read, which we can achieve by calling BIO_set_retry_read(). */
BIO_set_retry_read(bio);
BIO_set_mem_eof_return(bio, -1);
assert(type != NULL && type->tp_alloc != NULL);
self = (PySSLMemoryBIO *) type->tp_alloc(type, 0);
if (self == NULL) {
BIO_free(bio);
return NULL;
}
self->bio = bio;
self->eof_written = 0;
return (PyObject *) self;
}
static void
memory_bio_dealloc(PySSLMemoryBIO *self)
{
BIO_free(self->bio);
Py_TYPE(self)->tp_free(self);
}
static PyObject *
memory_bio_get_pending(PySSLMemoryBIO *self, void *c)
{
return PyLong_FromSize_t(BIO_ctrl_pending(self->bio));
}
PyDoc_STRVAR(PySSL_memory_bio_pending_doc,
"The number of bytes pending in the memory BIO.");
static PyObject *
memory_bio_get_eof(PySSLMemoryBIO *self, void *c)
{
return PyBool_FromLong((BIO_ctrl_pending(self->bio) == 0)
&& self->eof_written);
}
PyDoc_STRVAR(PySSL_memory_bio_eof_doc,
"Whether the memory BIO is at EOF.");
/*[clinic input]
_ssl.MemoryBIO.read
size as len: int = -1
/
Read up to size bytes from the memory BIO.
If size is not specified, read the entire buffer.
If the return value is an empty bytes instance, this means either
EOF or that no data is available. Use the "eof" property to
distinguish between the two.
[clinic start generated code]*/
static PyObject *
_ssl_MemoryBIO_read_impl(PySSLMemoryBIO *self, int len)
/*[clinic end generated code: output=a657aa1e79cd01b3 input=574d7be06a902366]*/
{
int avail, nbytes;
PyObject *result;
avail = (int)Py_MIN(BIO_ctrl_pending(self->bio), INT_MAX);
if ((len < 0) || (len > avail))
len = avail;
result = PyBytes_FromStringAndSize(NULL, len);
if ((result == NULL) || (len == 0))
return result;
nbytes = BIO_read(self->bio, PyBytes_AS_STRING(result), len);
if (nbytes < 0) {
Py_DECREF(result);
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
/* There should never be any short reads but check anyway. */
if (nbytes < len) {
_PyBytes_Resize(&result, nbytes);
}
return result;
}
/*[clinic input]
_ssl.MemoryBIO.write
b: Py_buffer
/
Writes the bytes b into the memory BIO.
Returns the number of bytes written.
[clinic start generated code]*/
static PyObject *
_ssl_MemoryBIO_write_impl(PySSLMemoryBIO *self, Py_buffer *b)
/*[clinic end generated code: output=156ec59110d75935 input=e45757b3e17c4808]*/
{
int nbytes;
if (b->len > INT_MAX) {
PyErr_Format(PyExc_OverflowError,
"string longer than %d bytes", INT_MAX);
return NULL;
}
if (self->eof_written) {
PyErr_SetString(PySSLErrorObject,
"cannot write() after write_eof()");
return NULL;
}
nbytes = BIO_write(self->bio, b->buf, (int)b->len);
if (nbytes < 0) {
_setSSLError(NULL, 0, __FILE__, __LINE__);
return NULL;
}
return PyLong_FromLong(nbytes);
}
/*[clinic input]
_ssl.MemoryBIO.write_eof
Write an EOF marker to the memory BIO.
When all data has been read, the "eof" property will be True.
[clinic start generated code]*/
static PyObject *
_ssl_MemoryBIO_write_eof_impl(PySSLMemoryBIO *self)
/*[clinic end generated code: output=d4106276ccd1ed34 input=56a945f1d29e8bd6]*/
{
self->eof_written = 1;
/* After an EOF is written, a zero return from read() should be a real EOF
* i.e. it should not be retried. Clear the SHOULD_RETRY flag. */
BIO_clear_retry_flags(self->bio);
BIO_set_mem_eof_return(self->bio, 0);
Py_RETURN_NONE;
}
static PyGetSetDef memory_bio_getsetlist[] = {
{"pending", (getter) memory_bio_get_pending, NULL,
PySSL_memory_bio_pending_doc},
{"eof", (getter) memory_bio_get_eof, NULL,
PySSL_memory_bio_eof_doc},
{NULL}, /* sentinel */
};
static struct PyMethodDef memory_bio_methods[] = {
_SSL_MEMORYBIO_READ_METHODDEF
_SSL_MEMORYBIO_WRITE_METHODDEF
_SSL_MEMORYBIO_WRITE_EOF_METHODDEF
{NULL, NULL} /* sentinel */
};
static PyTypeObject PySSLMemoryBIO_Type = {
PyVarObject_HEAD_INIT(NULL, 0)
"_ssl.MemoryBIO", /*tp_name*/
sizeof(PySSLMemoryBIO), /*tp_basicsize*/
0, /*tp_itemsize*/
(destructor)memory_bio_dealloc, /*tp_dealloc*/
0, /*tp_vectorcall_offset*/
0, /*tp_getattr*/
0, /*tp_setattr*/
0, /*tp_as_async*/
0, /*tp_repr*/
0, /*tp_as_number*/
0, /*tp_as_sequence*/
0, /*tp_as_mapping*/
0, /*tp_hash*/
0, /*tp_call*/
0, /*tp_str*/
0, /*tp_getattro*/
0, /*tp_setattro*/
0, /*tp_as_buffer*/
Py_TPFLAGS_DEFAULT, /*tp_flags*/
0, /*tp_doc*/
0, /*tp_traverse*/
0, /*tp_clear*/
0, /*tp_richcompare*/
0, /*tp_weaklistoffset*/
0, /*tp_iter*/
0, /*tp_iternext*/
memory_bio_methods, /*tp_methods*/
0, /*tp_members*/
memory_bio_getsetlist, /*tp_getset*/
0, /*tp_base*/
0, /*tp_dict*/
0, /*tp_descr_get*/
0, /*tp_descr_set*/
0, /*tp_dictoffset*/
0, /*tp_init*/
0, /*tp_alloc*/
_ssl_MemoryBIO, /*tp_new*/
};
/*
* SSL Session object
*/
static void
PySSLSession_dealloc(PySSLSession *self)
{
/* bpo-31095: UnTrack is needed before calling any callbacks */
PyObject_GC_UnTrack(self);
Py_XDECREF(self->ctx);
if (self->session != NULL) {
SSL_SESSION_free(self->session);
}
PyObject_GC_Del(self);
}
static PyObject *
PySSLSession_richcompare(PyObject *left, PyObject *right, int op)
{
int result;
if (left == NULL || right == NULL) {
PyErr_BadInternalCall();
return NULL;
}
if (!PySSLSession_Check(left) || !PySSLSession_Check(right)) {
Py_RETURN_NOTIMPLEMENTED;
}
if (left == right) {
result = 0;
} else {
const unsigned char *left_id, *right_id;
unsigned int left_len, right_len;
left_id = SSL_SESSION_get_id(((PySSLSession *)left)->session,
&left_len);
right_id = SSL_SESSION_get_id(((PySSLSession *)right)->session,
&right_len);
if (left_len == right_len) {
result = memcmp(left_id, right_id, left_len);
} else {
result = 1;
}
}
switch (op) {
case Py_EQ:
if (result == 0) {
Py_RETURN_TRUE;
} else {
Py_RETURN_FALSE;
}
break;
case Py_NE:
if (result != 0) {
Py_RETURN_TRUE;
} else {
Py_RETURN_FALSE;
}
break;
case Py_LT:
case Py_LE:
case Py_GT:
case Py_GE:
Py_RETURN_NOTIMPLEMENTED;
break;
default:
PyErr_BadArgument();
return NULL;
}
}
static int
PySSLSession_traverse(PySSLSession *self, visitproc visit, void *arg)
{
Py_VISIT(self->ctx);
return 0;
}
static int
PySSLSession_clear(PySSLSession *self)
{
Py_CLEAR(self->ctx);
return 0;
}
static PyObject *
PySSLSession_get_time(PySSLSession *self, void *closure) {
return PyLong_FromLong(SSL_SESSION_get_time(self->session));
}
PyDoc_STRVAR(PySSLSession_get_time_doc,
"Session creation time (seconds since epoch).");
static PyObject *
PySSLSession_get_timeout(PySSLSession *self, void *closure) {
return PyLong_FromLong(SSL_SESSION_get_timeout(self->session));
}
PyDoc_STRVAR(PySSLSession_get_timeout_doc,
"Session timeout (delta in seconds).");
static PyObject *
PySSLSession_get_ticket_lifetime_hint(PySSLSession *self, void *closure) {
unsigned long hint = SSL_SESSION_get_ticket_lifetime_hint(self->session);
return PyLong_FromUnsignedLong(hint);
}
PyDoc_STRVAR(PySSLSession_get_ticket_lifetime_hint_doc,
"Ticket life time hint.");
static PyObject *
PySSLSession_get_session_id(PySSLSession *self, void *closure) {
const unsigned char *id;
unsigned int len;
id = SSL_SESSION_get_id(self->session, &len);
return PyBytes_FromStringAndSize((const char *)id, len);
}
PyDoc_STRVAR(PySSLSession_get_session_id_doc,
"Session id");
static PyObject *
PySSLSession_get_has_ticket(PySSLSession *self, void *closure) {
if (SSL_SESSION_has_ticket(self->session)) {
Py_RETURN_TRUE;
} else {
Py_RETURN_FALSE;
}
}
PyDoc_STRVAR(PySSLSession_get_has_ticket_doc,
"Does the session contain a ticket?");
static PyGetSetDef PySSLSession_getsetlist[] = {
{"has_ticket", (getter) PySSLSession_get_has_ticket, NULL,
PySSLSession_get_has_ticket_doc},
{"id", (getter) PySSLSession_get_session_id, NULL,
PySSLSession_get_session_id_doc},
{"ticket_lifetime_hint", (getter) PySSLSession_get_ticket_lifetime_hint,
NULL, PySSLSession_get_ticket_lifetime_hint_doc},
{"time", (getter) PySSLSession_get_time, NULL,
PySSLSession_get_time_doc},
{"timeout", (getter) PySSLSession_get_timeout, NULL,
PySSLSession_get_timeout_doc},
{NULL}, /* sentinel */
};
static PyTypeObject PySSLSession_Type = {
PyVarObject_HEAD_INIT(NULL, 0)
"_ssl.Session", /*tp_name*/
sizeof(PySSLSession), /*tp_basicsize*/
0, /*tp_itemsize*/
(destructor)PySSLSession_dealloc, /*tp_dealloc*/
0, /*tp_vectorcall_offset*/
0, /*tp_getattr*/
0, /*tp_setattr*/
0, /*tp_as_async*/
0, /*tp_repr*/
0, /*tp_as_number*/
0, /*tp_as_sequence*/
0, /*tp_as_mapping*/
0, /*tp_hash*/
0, /*tp_call*/
0, /*tp_str*/
0, /*tp_getattro*/
0, /*tp_setattro*/
0, /*tp_as_buffer*/
Py_TPFLAGS_DEFAULT | Py_TPFLAGS_HAVE_GC, /*tp_flags*/
0, /*tp_doc*/
(traverseproc)PySSLSession_traverse, /*tp_traverse*/
(inquiry)PySSLSession_clear, /*tp_clear*/
PySSLSession_richcompare, /*tp_richcompare*/
0, /*tp_weaklistoffset*/
0, /*tp_iter*/
0, /*tp_iternext*/
0, /*tp_methods*/
0, /*tp_members*/
PySSLSession_getsetlist, /*tp_getset*/
};
/* helper routines for seeding the SSL PRNG */
/*[clinic input]
_ssl.RAND_add
string as view: Py_buffer(accept={str, buffer})
entropy: double
/
Mix string into the OpenSSL PRNG state.
entropy (a float) is a lower bound on the entropy contained in
string. See RFC 4086.
[clinic start generated code]*/
static PyObject *
_ssl_RAND_add_impl(PyObject *module, Py_buffer *view, double entropy)
/*[clinic end generated code: output=e6dd48df9c9024e9 input=5c33017422828f5c]*/
{
const char *buf;
Py_ssize_t len, written;
buf = (const char *)view->buf;
len = view->len;
do {
written = Py_MIN(len, INT_MAX);
RAND_add(buf, (int)written, entropy);
buf += written;
len -= written;
} while (len);
Py_RETURN_NONE;
}
static PyObject *
PySSL_RAND(int len, int pseudo)
{
int ok;
PyObject *bytes;
unsigned long err;
const char *errstr;
PyObject *v;
if (len < 0) {
PyErr_SetString(PyExc_ValueError, "num must be positive");
return NULL;
}
bytes = PyBytes_FromStringAndSize(NULL, len);
if (bytes == NULL)
return NULL;
if (pseudo) {
ok = RAND_pseudo_bytes((unsigned char*)PyBytes_AS_STRING(bytes), len);
if (ok == 0 || ok == 1)
return Py_BuildValue("NO", bytes, ok == 1 ? Py_True : Py_False);
}
else {
ok = RAND_bytes((unsigned char*)PyBytes_AS_STRING(bytes), len);
if (ok == 1)
return bytes;
}
Py_DECREF(bytes);
err = ERR_get_error();
errstr = ERR_reason_error_string(err);
v = Py_BuildValue("(ks)", err, errstr);
if (v != NULL) {
PyErr_SetObject(PySSLErrorObject, v);
Py_DECREF(v);
}
return NULL;
}
/*[clinic input]
_ssl.RAND_bytes
n: int
/
Generate n cryptographically strong pseudo-random bytes.
[clinic start generated code]*/
static PyObject *
_ssl_RAND_bytes_impl(PyObject *module, int n)
/*[clinic end generated code: output=977da635e4838bc7 input=678ddf2872dfebfc]*/
{
return PySSL_RAND(n, 0);
}
/*[clinic input]
_ssl.RAND_pseudo_bytes
n: int
/
Generate n pseudo-random bytes.
Return a pair (bytes, is_cryptographic). is_cryptographic is True
if the bytes generated are cryptographically strong.
[clinic start generated code]*/
static PyObject *
_ssl_RAND_pseudo_bytes_impl(PyObject *module, int n)
/*[clinic end generated code: output=b1509e937000e52d input=58312bd53f9bbdd0]*/
{
return PySSL_RAND(n, 1);
}
/*[clinic input]
_ssl.RAND_status
Returns 1 if the OpenSSL PRNG has been seeded with enough data and 0 if not.
It is necessary to seed the PRNG with RAND_add() on some platforms before
using the ssl() function.
[clinic start generated code]*/
static PyObject *
_ssl_RAND_status_impl(PyObject *module)
/*[clinic end generated code: output=7e0aaa2d39fdc1ad input=8a774b02d1dc81f3]*/
{
return PyLong_FromLong(RAND_status());
}
#ifndef OPENSSL_NO_EGD
/* LCOV_EXCL_START */
/*[clinic input]
_ssl.RAND_egd
path: object(converter="PyUnicode_FSConverter")
/
Queries the entropy gather daemon (EGD) on the socket named by 'path'.
Returns number of bytes read. Raises SSLError if connection to EGD
fails or if it does not provide enough data to seed PRNG.
[clinic start generated code]*/
static PyObject *
_ssl_RAND_egd_impl(PyObject *module, PyObject *path)
/*[clinic end generated code: output=02a67c7c367f52fa input=1aeb7eb948312195]*/
{
int bytes = RAND_egd(PyBytes_AsString(path));
Py_DECREF(path);
if (bytes == -1) {
PyErr_SetString(PySSLErrorObject,
"EGD connection failed or EGD did not return "
"enough data to seed the PRNG");
return NULL;
}
return PyLong_FromLong(bytes);
}
/* LCOV_EXCL_STOP */
#endif /* OPENSSL_NO_EGD */
/*[clinic input]
_ssl.get_default_verify_paths
Return search paths and environment vars that are used by SSLContext's set_default_verify_paths() to load default CAs.
The values are 'cert_file_env', 'cert_file', 'cert_dir_env', 'cert_dir'.
[clinic start generated code]*/
static PyObject *
_ssl_get_default_verify_paths_impl(PyObject *module)
/*[clinic end generated code: output=e5b62a466271928b input=5210c953d98c3eb5]*/
{
PyObject *ofile_env = NULL;
PyObject *ofile = NULL;
PyObject *odir_env = NULL;
PyObject *odir = NULL;
#define CONVERT(info, target) { \
const char *tmp = (info); \
target = NULL; \
if (!tmp) { Py_INCREF(Py_None); target = Py_None; } \
else if ((target = PyUnicode_DecodeFSDefault(tmp)) == NULL) { \
target = PyBytes_FromString(tmp); } \
if (!target) goto error; \
}
CONVERT(X509_get_default_cert_file_env(), ofile_env);
CONVERT(X509_get_default_cert_file(), ofile);
CONVERT(X509_get_default_cert_dir_env(), odir_env);
CONVERT(X509_get_default_cert_dir(), odir);
#undef CONVERT
return Py_BuildValue("NNNN", ofile_env, ofile, odir_env, odir);
error:
Py_XDECREF(ofile_env);
Py_XDECREF(ofile);
Py_XDECREF(odir_env);
Py_XDECREF(odir);
return NULL;
}
static PyObject*
asn1obj2py(ASN1_OBJECT *obj)
{
int nid;
const char *ln, *sn;
nid = OBJ_obj2nid(obj);
if (nid == NID_undef) {
PyErr_Format(PyExc_ValueError, "Unknown object");
return NULL;
}
sn = OBJ_nid2sn(nid);
ln = OBJ_nid2ln(nid);
return Py_BuildValue("issN", nid, sn, ln, _asn1obj2py(obj, 1));
}
/*[clinic input]
_ssl.txt2obj
txt: str
name: bool = False
Lookup NID, short name, long name and OID of an ASN1_OBJECT.
By default objects are looked up by OID. With name=True short and
long name are also matched.
[clinic start generated code]*/
static PyObject *
_ssl_txt2obj_impl(PyObject *module, const char *txt, int name)
/*[clinic end generated code: output=c38e3991347079c1 input=1c1e7d0aa7c48602]*/
{
PyObject *result = NULL;
ASN1_OBJECT *obj;
obj = OBJ_txt2obj(txt, name ? 0 : 1);
if (obj == NULL) {
PyErr_Format(PyExc_ValueError, "unknown object '%.100s'", txt);
return NULL;
}
result = asn1obj2py(obj);
ASN1_OBJECT_free(obj);
return result;
}
/*[clinic input]
_ssl.nid2obj
nid: int
/
Lookup NID, short name, long name and OID of an ASN1_OBJECT by NID.
[clinic start generated code]*/
static PyObject *
_ssl_nid2obj_impl(PyObject *module, int nid)
/*[clinic end generated code: output=4a98ab691cd4f84a input=51787a3bee7d8f98]*/
{
PyObject *result = NULL;
ASN1_OBJECT *obj;
if (nid < NID_undef) {
PyErr_SetString(PyExc_ValueError, "NID must be positive.");
return NULL;
}
obj = OBJ_nid2obj(nid);
if (obj == NULL) {
PyErr_Format(PyExc_ValueError, "unknown NID %i", nid);
return NULL;
}
result = asn1obj2py(obj);
ASN1_OBJECT_free(obj);
return result;
}
#ifdef _MSC_VER
static PyObject*
certEncodingType(DWORD encodingType)
{
static PyObject *x509_asn = NULL;
static PyObject *pkcs_7_asn = NULL;
if (x509_asn == NULL) {
x509_asn = PyUnicode_InternFromString("x509_asn");
if (x509_asn == NULL)
return NULL;
}
if (pkcs_7_asn == NULL) {
pkcs_7_asn = PyUnicode_InternFromString("pkcs_7_asn");
if (pkcs_7_asn == NULL)
return NULL;
}
switch(encodingType) {
case X509_ASN_ENCODING:
Py_INCREF(x509_asn);
return x509_asn;
case PKCS_7_ASN_ENCODING:
Py_INCREF(pkcs_7_asn);
return pkcs_7_asn;
default:
return PyLong_FromLong(encodingType);
}
}
static PyObject*
parseKeyUsage(PCCERT_CONTEXT pCertCtx, DWORD flags)
{
CERT_ENHKEY_USAGE *usage;
DWORD size, error, i;
PyObject *retval;
if (!CertGetEnhancedKeyUsage(pCertCtx, flags, NULL, &size)) {
error = GetLastError();
if (error == CRYPT_E_NOT_FOUND) {
Py_RETURN_TRUE;
}
return PyErr_SetFromWindowsErr(error);
}
usage = (CERT_ENHKEY_USAGE*)PyMem_Malloc(size);
if (usage == NULL) {
return PyErr_NoMemory();
}
/* Now get the actual enhanced usage property */
if (!CertGetEnhancedKeyUsage(pCertCtx, flags, usage, &size)) {
PyMem_Free(usage);
error = GetLastError();
if (error == CRYPT_E_NOT_FOUND) {
Py_RETURN_TRUE;
}
return PyErr_SetFromWindowsErr(error);
}
retval = PySet_New(NULL);
if (retval == NULL) {
goto error;
}
for (i = 0; i < usage->cUsageIdentifier; ++i) {
if (usage->rgpszUsageIdentifier[i]) {
PyObject *oid;
int err;
oid = PyUnicode_FromString(usage->rgpszUsageIdentifier[i]);
if (oid == NULL) {
Py_CLEAR(retval);
goto error;
}
err = PySet_Add(retval, oid);
Py_DECREF(oid);
if (err == -1) {
Py_CLEAR(retval);
goto error;
}
}
}
error:
PyMem_Free(usage);
return retval;
}
static HCERTSTORE
ssl_collect_certificates(const char *store_name)
{
/* this function collects the system certificate stores listed in
* system_stores into a collection certificate store for being
* enumerated. The store must be readable to be added to the
* store collection.
*/
HCERTSTORE hCollectionStore = NULL, hSystemStore = NULL;
static DWORD system_stores[] = {
CERT_SYSTEM_STORE_LOCAL_MACHINE,
CERT_SYSTEM_STORE_LOCAL_MACHINE_ENTERPRISE,
CERT_SYSTEM_STORE_LOCAL_MACHINE_GROUP_POLICY,
CERT_SYSTEM_STORE_CURRENT_USER,
CERT_SYSTEM_STORE_CURRENT_USER_GROUP_POLICY,
CERT_SYSTEM_STORE_SERVICES,
CERT_SYSTEM_STORE_USERS};
size_t i, storesAdded;
BOOL result;
hCollectionStore = CertOpenStore(CERT_STORE_PROV_COLLECTION, 0,
(HCRYPTPROV)NULL, 0, NULL);
if (!hCollectionStore) {
return NULL;
}
storesAdded = 0;
for (i = 0; i < sizeof(system_stores) / sizeof(DWORD); i++) {
hSystemStore = CertOpenStore(CERT_STORE_PROV_SYSTEM_A, 0,
(HCRYPTPROV)NULL,
CERT_STORE_READONLY_FLAG |
system_stores[i], store_name);
if (hSystemStore) {
result = CertAddStoreToCollection(hCollectionStore, hSystemStore,
CERT_PHYSICAL_STORE_ADD_ENABLE_FLAG, 0);
if (result) {
++storesAdded;
}
}
}
if (storesAdded == 0) {
CertCloseStore(hCollectionStore, CERT_CLOSE_STORE_FORCE_FLAG);
return NULL;
}
return hCollectionStore;
}
/* code from Objects/listobject.c */
static int
list_contains(PyListObject *a, PyObject *el)
{
Py_ssize_t i;
int cmp;
for (i = 0, cmp = 0 ; cmp == 0 && i < Py_SIZE(a); ++i)
cmp = PyObject_RichCompareBool(el, PyList_GET_ITEM(a, i),
Py_EQ);
return cmp;
}
/*[clinic input]
_ssl.enum_certificates
store_name: str
Retrieve certificates from Windows' cert store.
store_name may be one of 'CA', 'ROOT' or 'MY'. The system may provide
more cert storages, too. The function returns a list of (bytes,
encoding_type, trust) tuples. The encoding_type flag can be interpreted
with X509_ASN_ENCODING or PKCS_7_ASN_ENCODING. The trust setting is either
a set of OIDs or the boolean True.
[clinic start generated code]*/
static PyObject *
_ssl_enum_certificates_impl(PyObject *module, const char *store_name)
/*[clinic end generated code: output=5134dc8bb3a3c893 input=915f60d70461ea4e]*/
{
HCERTSTORE hCollectionStore = NULL;
PCCERT_CONTEXT pCertCtx = NULL;
PyObject *keyusage = NULL, *cert = NULL, *enc = NULL, *tup = NULL;
PyObject *result = NULL;
result = PyList_New(0);
if (result == NULL) {
return NULL;
}
hCollectionStore = ssl_collect_certificates(store_name);
if (hCollectionStore == NULL) {
Py_DECREF(result);
return PyErr_SetFromWindowsErr(GetLastError());
}
while (pCertCtx = CertEnumCertificatesInStore(hCollectionStore, pCertCtx)) {
cert = PyBytes_FromStringAndSize((const char*)pCertCtx->pbCertEncoded,
pCertCtx->cbCertEncoded);
if (!cert) {
Py_CLEAR(result);
break;
}
if ((enc = certEncodingType(pCertCtx->dwCertEncodingType)) == NULL) {
Py_CLEAR(result);
break;
}
keyusage = parseKeyUsage(pCertCtx, CERT_FIND_PROP_ONLY_ENHKEY_USAGE_FLAG);
if (keyusage == Py_True) {
Py_DECREF(keyusage);
keyusage = parseKeyUsage(pCertCtx, CERT_FIND_EXT_ONLY_ENHKEY_USAGE_FLAG);
}
if (keyusage == NULL) {
Py_CLEAR(result);
break;
}
if ((tup = PyTuple_New(3)) == NULL) {
Py_CLEAR(result);
break;
}
PyTuple_SET_ITEM(tup, 0, cert);
cert = NULL;
PyTuple_SET_ITEM(tup, 1, enc);
enc = NULL;
PyTuple_SET_ITEM(tup, 2, keyusage);
keyusage = NULL;
if (!list_contains((PyListObject*)result, tup)) {
if (PyList_Append(result, tup) < 0) {
Py_CLEAR(result);
break;
}
}
Py_CLEAR(tup);
}
if (pCertCtx) {
/* loop ended with an error, need to clean up context manually */
CertFreeCertificateContext(pCertCtx);
}
/* In error cases cert, enc and tup may not be NULL */
Py_XDECREF(cert);
Py_XDECREF(enc);
Py_XDECREF(keyusage);
Py_XDECREF(tup);
/* CERT_CLOSE_STORE_FORCE_FLAG forces freeing of memory for all contexts
associated with the store, in this case our collection store and the
associated system stores. */
if (!CertCloseStore(hCollectionStore, CERT_CLOSE_STORE_FORCE_FLAG)) {
/* This error case might shadow another exception.*/
Py_XDECREF(result);
return PyErr_SetFromWindowsErr(GetLastError());
}
return result;
}
/*[clinic input]
_ssl.enum_crls
store_name: str
Retrieve CRLs from Windows' cert store.
store_name may be one of 'CA', 'ROOT' or 'MY'. The system may provide
more cert storages, too. The function returns a list of (bytes,
encoding_type) tuples. The encoding_type flag can be interpreted with
X509_ASN_ENCODING or PKCS_7_ASN_ENCODING.
[clinic start generated code]*/
static PyObject *
_ssl_enum_crls_impl(PyObject *module, const char *store_name)
/*[clinic end generated code: output=bce467f60ccd03b6 input=a1f1d7629f1c5d3d]*/
{
HCERTSTORE hCollectionStore = NULL;
PCCRL_CONTEXT pCrlCtx = NULL;
PyObject *crl = NULL, *enc = NULL, *tup = NULL;
PyObject *result = NULL;
result = PyList_New(0);
if (result == NULL) {
return NULL;
}
hCollectionStore = ssl_collect_certificates(store_name);
if (hCollectionStore == NULL) {
Py_DECREF(result);
return PyErr_SetFromWindowsErr(GetLastError());
}
while (pCrlCtx = CertEnumCRLsInStore(hCollectionStore, pCrlCtx)) {
crl = PyBytes_FromStringAndSize((const char*)pCrlCtx->pbCrlEncoded,
pCrlCtx->cbCrlEncoded);
if (!crl) {
Py_CLEAR(result);
break;
}
if ((enc = certEncodingType(pCrlCtx->dwCertEncodingType)) == NULL) {
Py_CLEAR(result);
break;
}
if ((tup = PyTuple_New(2)) == NULL) {
Py_CLEAR(result);
break;
}
PyTuple_SET_ITEM(tup, 0, crl);
crl = NULL;
PyTuple_SET_ITEM(tup, 1, enc);
enc = NULL;
if (!list_contains((PyListObject*)result, tup)) {
if (PyList_Append(result, tup) < 0) {
Py_CLEAR(result);
break;
}
}
Py_CLEAR(tup);
}
if (pCrlCtx) {
/* loop ended with an error, need to clean up context manually */
CertFreeCRLContext(pCrlCtx);
}
/* In error cases cert, enc and tup may not be NULL */
Py_XDECREF(crl);
Py_XDECREF(enc);
Py_XDECREF(tup);
/* CERT_CLOSE_STORE_FORCE_FLAG forces freeing of memory for all contexts
associated with the store, in this case our collection store and the
associated system stores. */
if (!CertCloseStore(hCollectionStore, CERT_CLOSE_STORE_FORCE_FLAG)) {
/* This error case might shadow another exception.*/
Py_XDECREF(result);
return PyErr_SetFromWindowsErr(GetLastError());
}
return result;
}
#endif /* _MSC_VER */
/* List of functions exported by this module. */
static PyMethodDef PySSL_methods[] = {
_SSL__TEST_DECODE_CERT_METHODDEF
_SSL_RAND_ADD_METHODDEF
_SSL_RAND_BYTES_METHODDEF
_SSL_RAND_PSEUDO_BYTES_METHODDEF
_SSL_RAND_EGD_METHODDEF
_SSL_RAND_STATUS_METHODDEF
_SSL_GET_DEFAULT_VERIFY_PATHS_METHODDEF
_SSL_ENUM_CERTIFICATES_METHODDEF
_SSL_ENUM_CRLS_METHODDEF
_SSL_TXT2OBJ_METHODDEF
_SSL_NID2OBJ_METHODDEF
{NULL, NULL} /* Sentinel */
};
#ifdef HAVE_OPENSSL_CRYPTO_LOCK
/* an implementation of OpenSSL threading operations in terms
* of the Python C thread library
* Only used up to 1.0.2. OpenSSL 1.1.0+ has its own locking code.
*/
static PyThread_type_lock *_ssl_locks = NULL;
#if OPENSSL_VERSION_NUMBER >= 0x10000000
/* use new CRYPTO_THREADID API. */
static void
_ssl_threadid_callback(CRYPTO_THREADID *id)
{
CRYPTO_THREADID_set_numeric(id, PyThread_get_thread_ident());
}
#else
/* deprecated CRYPTO_set_id_callback() API. */
static unsigned long
_ssl_thread_id_function (void) {
return PyThread_get_thread_ident();
}
#endif
static void _ssl_thread_locking_function
(int mode, int n, const char *file, int line) {
/* this function is needed to perform locking on shared data
structures. (Note that OpenSSL uses a number of global data
structures that will be implicitly shared whenever multiple
threads use OpenSSL.) Multi-threaded applications will
crash at random if it is not set.
locking_function() must be able to handle up to
CRYPTO_num_locks() different mutex locks. It sets the n-th
lock if mode & CRYPTO_LOCK, and releases it otherwise.
file and line are the file number of the function setting the
lock. They can be useful for debugging.
*/
if ((_ssl_locks == NULL) ||
(n < 0) || ((unsigned)n >= _ssl_locks_count))
return;
if (mode & CRYPTO_LOCK) {
PyThread_acquire_lock(_ssl_locks[n], 1);
} else {
PyThread_release_lock(_ssl_locks[n]);
}
}
static int _setup_ssl_threads(void) {
unsigned int i;
if (_ssl_locks == NULL) {
_ssl_locks_count = CRYPTO_num_locks();
_ssl_locks = PyMem_Calloc(_ssl_locks_count,
sizeof(PyThread_type_lock));
if (_ssl_locks == NULL) {
PyErr_NoMemory();
return 0;
}
for (i = 0; i < _ssl_locks_count; i++) {
_ssl_locks[i] = PyThread_allocate_lock();
if (_ssl_locks[i] == NULL) {
unsigned int j;
for (j = 0; j < i; j++) {
PyThread_free_lock(_ssl_locks[j]);
}
PyMem_Free(_ssl_locks);
return 0;
}
}
CRYPTO_set_locking_callback(_ssl_thread_locking_function);
#if OPENSSL_VERSION_NUMBER >= 0x10000000
CRYPTO_THREADID_set_callback(_ssl_threadid_callback);
#else
CRYPTO_set_id_callback(_ssl_thread_id_function);
#endif
}
return 1;
}
#endif /* HAVE_OPENSSL_CRYPTO_LOCK for OpenSSL < 1.1.0 */
PyDoc_STRVAR(module_doc,
"Implementation module for SSL socket operations. See the socket module\n\
for documentation.");
static struct PyModuleDef _sslmodule = {
PyModuleDef_HEAD_INIT,
"_ssl",
module_doc,
-1,
PySSL_methods,
NULL,
NULL,
NULL,
NULL
};
static void
parse_openssl_version(unsigned long libver,
unsigned int *major, unsigned int *minor,
unsigned int *fix, unsigned int *patch,
unsigned int *status)
{
*status = libver & 0xF;
libver >>= 4;
*patch = libver & 0xFF;
libver >>= 8;
*fix = libver & 0xFF;
libver >>= 8;
*minor = libver & 0xFF;
libver >>= 8;
*major = libver & 0xFF;
}
PyMODINIT_FUNC
PyInit__ssl(void)
{
PyObject *m, *d, *r, *bases;
unsigned long libver;
unsigned int major, minor, fix, patch, status;
PySocketModule_APIObject *socket_api;
struct py_ssl_error_code *errcode;
struct py_ssl_library_code *libcode;
if (PyType_Ready(&PySSLContext_Type) < 0)
return NULL;
if (PyType_Ready(&PySSLSocket_Type) < 0)
return NULL;
if (PyType_Ready(&PySSLMemoryBIO_Type) < 0)
return NULL;
if (PyType_Ready(&PySSLSession_Type) < 0)
return NULL;
m = PyModule_Create(&_sslmodule);
if (m == NULL)
return NULL;
d = PyModule_GetDict(m);
/* Load _socket module and its C API */
socket_api = PySocketModule_ImportModuleAndAPI();
if (!socket_api)
return NULL;
PySocketModule = *socket_api;
#ifndef OPENSSL_VERSION_1_1
/* Load all algorithms and initialize cpuid */
OPENSSL_add_all_algorithms_noconf();
/* Init OpenSSL */
SSL_load_error_strings();
SSL_library_init();
#endif
#ifdef HAVE_OPENSSL_CRYPTO_LOCK
/* note that this will start threading if not already started */
if (!_setup_ssl_threads()) {
return NULL;
}
#elif OPENSSL_VERSION_1_1 && defined(OPENSSL_THREADS)
/* OpenSSL 1.1.0 builtin thread support is enabled */
_ssl_locks_count++;
#endif
/* Add symbols to module dict */
sslerror_type_slots[0].pfunc = PyExc_OSError;
PySSLErrorObject = PyType_FromSpec(&sslerror_type_spec);
if (PySSLErrorObject == NULL)
return NULL;
/* ssl.CertificateError used to be a subclass of ValueError */
bases = Py_BuildValue("OO", PySSLErrorObject, PyExc_ValueError);
if (bases == NULL)
return NULL;
PySSLCertVerificationErrorObject = PyErr_NewExceptionWithDoc(
"ssl.SSLCertVerificationError", SSLCertVerificationError_doc,
bases, NULL);
Py_DECREF(bases);
PySSLZeroReturnErrorObject = PyErr_NewExceptionWithDoc(
"ssl.SSLZeroReturnError", SSLZeroReturnError_doc,
PySSLErrorObject, NULL);
PySSLWantReadErrorObject = PyErr_NewExceptionWithDoc(
"ssl.SSLWantReadError", SSLWantReadError_doc,
PySSLErrorObject, NULL);
PySSLWantWriteErrorObject = PyErr_NewExceptionWithDoc(
"ssl.SSLWantWriteError", SSLWantWriteError_doc,
PySSLErrorObject, NULL);
PySSLSyscallErrorObject = PyErr_NewExceptionWithDoc(
"ssl.SSLSyscallError", SSLSyscallError_doc,
PySSLErrorObject, NULL);
PySSLEOFErrorObject = PyErr_NewExceptionWithDoc(
"ssl.SSLEOFError", SSLEOFError_doc,
PySSLErrorObject, NULL);
if (PySSLCertVerificationErrorObject == NULL
|| PySSLZeroReturnErrorObject == NULL
|| PySSLWantReadErrorObject == NULL
|| PySSLWantWriteErrorObject == NULL
|| PySSLSyscallErrorObject == NULL
|| PySSLEOFErrorObject == NULL)
return NULL;
if (PyDict_SetItemString(d, "SSLError", PySSLErrorObject) != 0
|| PyDict_SetItemString(d, "SSLCertVerificationError",
PySSLCertVerificationErrorObject) != 0
|| PyDict_SetItemString(d, "SSLZeroReturnError", PySSLZeroReturnErrorObject) != 0
|| PyDict_SetItemString(d, "SSLWantReadError", PySSLWantReadErrorObject) != 0
|| PyDict_SetItemString(d, "SSLWantWriteError", PySSLWantWriteErrorObject) != 0
|| PyDict_SetItemString(d, "SSLSyscallError", PySSLSyscallErrorObject) != 0
|| PyDict_SetItemString(d, "SSLEOFError", PySSLEOFErrorObject) != 0)
return NULL;
if (PyDict_SetItemString(d, "_SSLContext",
(PyObject *)&PySSLContext_Type) != 0)
return NULL;
if (PyDict_SetItemString(d, "_SSLSocket",
(PyObject *)&PySSLSocket_Type) != 0)
return NULL;
if (PyDict_SetItemString(d, "MemoryBIO",
(PyObject *)&PySSLMemoryBIO_Type) != 0)
return NULL;
if (PyDict_SetItemString(d, "SSLSession",
(PyObject *)&PySSLSession_Type) != 0)
return NULL;
PyModule_AddStringConstant(m, "_DEFAULT_CIPHERS",
PY_SSL_DEFAULT_CIPHER_STRING);
PyModule_AddIntConstant(m, "SSL_ERROR_ZERO_RETURN",
PY_SSL_ERROR_ZERO_RETURN);
PyModule_AddIntConstant(m, "SSL_ERROR_WANT_READ",
PY_SSL_ERROR_WANT_READ);
PyModule_AddIntConstant(m, "SSL_ERROR_WANT_WRITE",
PY_SSL_ERROR_WANT_WRITE);
PyModule_AddIntConstant(m, "SSL_ERROR_WANT_X509_LOOKUP",
PY_SSL_ERROR_WANT_X509_LOOKUP);
PyModule_AddIntConstant(m, "SSL_ERROR_SYSCALL",
PY_SSL_ERROR_SYSCALL);
PyModule_AddIntConstant(m, "SSL_ERROR_SSL",
PY_SSL_ERROR_SSL);
PyModule_AddIntConstant(m, "SSL_ERROR_WANT_CONNECT",
PY_SSL_ERROR_WANT_CONNECT);
/* non ssl.h errorcodes */
PyModule_AddIntConstant(m, "SSL_ERROR_EOF",
PY_SSL_ERROR_EOF);
PyModule_AddIntConstant(m, "SSL_ERROR_INVALID_ERROR_CODE",
PY_SSL_ERROR_INVALID_ERROR_CODE);
/* cert requirements */
PyModule_AddIntConstant(m, "CERT_NONE",
PY_SSL_CERT_NONE);
PyModule_AddIntConstant(m, "CERT_OPTIONAL",
PY_SSL_CERT_OPTIONAL);
PyModule_AddIntConstant(m, "CERT_REQUIRED",
PY_SSL_CERT_REQUIRED);
/* CRL verification for verification_flags */
PyModule_AddIntConstant(m, "VERIFY_DEFAULT",
0);
PyModule_AddIntConstant(m, "VERIFY_CRL_CHECK_LEAF",
X509_V_FLAG_CRL_CHECK);
PyModule_AddIntConstant(m, "VERIFY_CRL_CHECK_CHAIN",
X509_V_FLAG_CRL_CHECK|X509_V_FLAG_CRL_CHECK_ALL);
PyModule_AddIntConstant(m, "VERIFY_X509_STRICT",
X509_V_FLAG_X509_STRICT);
#ifdef X509_V_FLAG_TRUSTED_FIRST
PyModule_AddIntConstant(m, "VERIFY_X509_TRUSTED_FIRST",
X509_V_FLAG_TRUSTED_FIRST);
#endif
/* Alert Descriptions from ssl.h */
/* note RESERVED constants no longer intended for use have been removed */
/* http://www.iana.org/assignments/tls-parameters/tls-parameters.xml#tls-parameters-6 */
#define ADD_AD_CONSTANT(s) \
PyModule_AddIntConstant(m, "ALERT_DESCRIPTION_"#s, \
SSL_AD_##s)
ADD_AD_CONSTANT(CLOSE_NOTIFY);
ADD_AD_CONSTANT(UNEXPECTED_MESSAGE);
ADD_AD_CONSTANT(BAD_RECORD_MAC);
ADD_AD_CONSTANT(RECORD_OVERFLOW);
ADD_AD_CONSTANT(DECOMPRESSION_FAILURE);
ADD_AD_CONSTANT(HANDSHAKE_FAILURE);
ADD_AD_CONSTANT(BAD_CERTIFICATE);
ADD_AD_CONSTANT(UNSUPPORTED_CERTIFICATE);
ADD_AD_CONSTANT(CERTIFICATE_REVOKED);
ADD_AD_CONSTANT(CERTIFICATE_EXPIRED);
ADD_AD_CONSTANT(CERTIFICATE_UNKNOWN);
ADD_AD_CONSTANT(ILLEGAL_PARAMETER);
ADD_AD_CONSTANT(UNKNOWN_CA);
ADD_AD_CONSTANT(ACCESS_DENIED);
ADD_AD_CONSTANT(DECODE_ERROR);
ADD_AD_CONSTANT(DECRYPT_ERROR);
ADD_AD_CONSTANT(PROTOCOL_VERSION);
ADD_AD_CONSTANT(INSUFFICIENT_SECURITY);
ADD_AD_CONSTANT(INTERNAL_ERROR);
ADD_AD_CONSTANT(USER_CANCELLED);
ADD_AD_CONSTANT(NO_RENEGOTIATION);
/* Not all constants are in old OpenSSL versions */
#ifdef SSL_AD_UNSUPPORTED_EXTENSION
ADD_AD_CONSTANT(UNSUPPORTED_EXTENSION);
#endif
#ifdef SSL_AD_CERTIFICATE_UNOBTAINABLE
ADD_AD_CONSTANT(CERTIFICATE_UNOBTAINABLE);
#endif
#ifdef SSL_AD_UNRECOGNIZED_NAME
ADD_AD_CONSTANT(UNRECOGNIZED_NAME);
#endif
#ifdef SSL_AD_BAD_CERTIFICATE_STATUS_RESPONSE
ADD_AD_CONSTANT(BAD_CERTIFICATE_STATUS_RESPONSE);
#endif
#ifdef SSL_AD_BAD_CERTIFICATE_HASH_VALUE
ADD_AD_CONSTANT(BAD_CERTIFICATE_HASH_VALUE);
#endif
#ifdef SSL_AD_UNKNOWN_PSK_IDENTITY
ADD_AD_CONSTANT(UNKNOWN_PSK_IDENTITY);
#endif
#undef ADD_AD_CONSTANT
/* protocol versions */
#ifndef OPENSSL_NO_SSL2
PyModule_AddIntConstant(m, "PROTOCOL_SSLv2",
PY_SSL_VERSION_SSL2);
#endif
#ifndef OPENSSL_NO_SSL3
PyModule_AddIntConstant(m, "PROTOCOL_SSLv3",
PY_SSL_VERSION_SSL3);
#endif
PyModule_AddIntConstant(m, "PROTOCOL_SSLv23",
PY_SSL_VERSION_TLS);
PyModule_AddIntConstant(m, "PROTOCOL_TLS",
PY_SSL_VERSION_TLS);
PyModule_AddIntConstant(m, "PROTOCOL_TLS_CLIENT",
PY_SSL_VERSION_TLS_CLIENT);
PyModule_AddIntConstant(m, "PROTOCOL_TLS_SERVER",
PY_SSL_VERSION_TLS_SERVER);
PyModule_AddIntConstant(m, "PROTOCOL_TLSv1",
PY_SSL_VERSION_TLS1);
#if HAVE_TLSv1_2
PyModule_AddIntConstant(m, "PROTOCOL_TLSv1_1",
PY_SSL_VERSION_TLS1_1);
PyModule_AddIntConstant(m, "PROTOCOL_TLSv1_2",
PY_SSL_VERSION_TLS1_2);
#endif
/* protocol options */
PyModule_AddIntConstant(m, "OP_ALL",
SSL_OP_ALL & ~SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS);
PyModule_AddIntConstant(m, "OP_NO_SSLv2", SSL_OP_NO_SSLv2);
PyModule_AddIntConstant(m, "OP_NO_SSLv3", SSL_OP_NO_SSLv3);
PyModule_AddIntConstant(m, "OP_NO_TLSv1", SSL_OP_NO_TLSv1);
#if HAVE_TLSv1_2
PyModule_AddIntConstant(m, "OP_NO_TLSv1_1", SSL_OP_NO_TLSv1_1);
PyModule_AddIntConstant(m, "OP_NO_TLSv1_2", SSL_OP_NO_TLSv1_2);
#endif
#ifdef SSL_OP_NO_TLSv1_3
PyModule_AddIntConstant(m, "OP_NO_TLSv1_3", SSL_OP_NO_TLSv1_3);
#else
PyModule_AddIntConstant(m, "OP_NO_TLSv1_3", 0);
#endif
PyModule_AddIntConstant(m, "OP_CIPHER_SERVER_PREFERENCE",
SSL_OP_CIPHER_SERVER_PREFERENCE);
PyModule_AddIntConstant(m, "OP_SINGLE_DH_USE", SSL_OP_SINGLE_DH_USE);
PyModule_AddIntConstant(m, "OP_NO_TICKET", SSL_OP_NO_TICKET);
#ifdef SSL_OP_SINGLE_ECDH_USE
PyModule_AddIntConstant(m, "OP_SINGLE_ECDH_USE", SSL_OP_SINGLE_ECDH_USE);
#endif
#ifdef SSL_OP_NO_COMPRESSION
PyModule_AddIntConstant(m, "OP_NO_COMPRESSION",
SSL_OP_NO_COMPRESSION);
#endif
#ifdef SSL_OP_ENABLE_MIDDLEBOX_COMPAT
PyModule_AddIntConstant(m, "OP_ENABLE_MIDDLEBOX_COMPAT",
SSL_OP_ENABLE_MIDDLEBOX_COMPAT);
#endif
#ifdef SSL_OP_NO_RENEGOTIATION
PyModule_AddIntConstant(m, "OP_NO_RENEGOTIATION",
SSL_OP_NO_RENEGOTIATION);
#endif
#ifdef X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT
PyModule_AddIntConstant(m, "HOSTFLAG_ALWAYS_CHECK_SUBJECT",
X509_CHECK_FLAG_ALWAYS_CHECK_SUBJECT);
#endif
#ifdef X509_CHECK_FLAG_NEVER_CHECK_SUBJECT
PyModule_AddIntConstant(m, "HOSTFLAG_NEVER_CHECK_SUBJECT",
X509_CHECK_FLAG_NEVER_CHECK_SUBJECT);
#endif
#ifdef X509_CHECK_FLAG_NO_WILDCARDS
PyModule_AddIntConstant(m, "HOSTFLAG_NO_WILDCARDS",
X509_CHECK_FLAG_NO_WILDCARDS);
#endif
#ifdef X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS
PyModule_AddIntConstant(m, "HOSTFLAG_NO_PARTIAL_WILDCARDS",
X509_CHECK_FLAG_NO_PARTIAL_WILDCARDS);
#endif
#ifdef X509_CHECK_FLAG_MULTI_LABEL_WILDCARDS
PyModule_AddIntConstant(m, "HOSTFLAG_MULTI_LABEL_WILDCARDS",
X509_CHECK_FLAG_MULTI_LABEL_WILDCARDS);
#endif
#ifdef X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS
PyModule_AddIntConstant(m, "HOSTFLAG_SINGLE_LABEL_SUBDOMAINS",
X509_CHECK_FLAG_SINGLE_LABEL_SUBDOMAINS);
#endif
/* protocol versions */
PyModule_AddIntConstant(m, "PROTO_MINIMUM_SUPPORTED",
PY_PROTO_MINIMUM_SUPPORTED);
PyModule_AddIntConstant(m, "PROTO_MAXIMUM_SUPPORTED",
PY_PROTO_MAXIMUM_SUPPORTED);
PyModule_AddIntConstant(m, "PROTO_SSLv3", PY_PROTO_SSLv3);
PyModule_AddIntConstant(m, "PROTO_TLSv1", PY_PROTO_TLSv1);
PyModule_AddIntConstant(m, "PROTO_TLSv1_1", PY_PROTO_TLSv1_1);
PyModule_AddIntConstant(m, "PROTO_TLSv1_2", PY_PROTO_TLSv1_2);
PyModule_AddIntConstant(m, "PROTO_TLSv1_3", PY_PROTO_TLSv1_3);
#define addbool(m, key, value) \
do { \
PyObject *bool_obj = (value) ? Py_True : Py_False; \
Py_INCREF(bool_obj); \
PyModule_AddObject((m), (key), bool_obj); \
} while (0)
#if HAVE_SNI
addbool(m, "HAS_SNI", 1);
#else
addbool(m, "HAS_SNI", 0);
#endif
addbool(m, "HAS_TLS_UNIQUE", 1);
#ifndef OPENSSL_NO_ECDH
addbool(m, "HAS_ECDH", 1);
#else
addbool(m, "HAS_ECDH", 0);
#endif
#if HAVE_NPN
addbool(m, "HAS_NPN", 1);
#else
addbool(m, "HAS_NPN", 0);
#endif
#if HAVE_ALPN
addbool(m, "HAS_ALPN", 1);
#else
addbool(m, "HAS_ALPN", 0);
#endif
#if defined(SSL2_VERSION) && !defined(OPENSSL_NO_SSL2)
addbool(m, "HAS_SSLv2", 1);
#else
addbool(m, "HAS_SSLv2", 0);
#endif
#if defined(SSL3_VERSION) && !defined(OPENSSL_NO_SSL3)
addbool(m, "HAS_SSLv3", 1);
#else
addbool(m, "HAS_SSLv3", 0);
#endif
#if defined(TLS1_VERSION) && !defined(OPENSSL_NO_TLS1)
addbool(m, "HAS_TLSv1", 1);
#else
addbool(m, "HAS_TLSv1", 0);
#endif
#if defined(TLS1_1_VERSION) && !defined(OPENSSL_NO_TLS1_1)
addbool(m, "HAS_TLSv1_1", 1);
#else
addbool(m, "HAS_TLSv1_1", 0);
#endif
#if defined(TLS1_2_VERSION) && !defined(OPENSSL_NO_TLS1_2)
addbool(m, "HAS_TLSv1_2", 1);
#else
addbool(m, "HAS_TLSv1_2", 0);
#endif
#if defined(TLS1_3_VERSION) && !defined(OPENSSL_NO_TLS1_3)
addbool(m, "HAS_TLSv1_3", 1);
#else
addbool(m, "HAS_TLSv1_3", 0);
#endif
/* Mappings for error codes */
err_codes_to_names = PyDict_New();
err_names_to_codes = PyDict_New();
if (err_codes_to_names == NULL || err_names_to_codes == NULL)
return NULL;
errcode = error_codes;
while (errcode->mnemonic != NULL) {
PyObject *mnemo, *key;
mnemo = PyUnicode_FromString(errcode->mnemonic);
key = Py_BuildValue("ii", errcode->library, errcode->reason);
if (mnemo == NULL || key == NULL)
return NULL;
if (PyDict_SetItem(err_codes_to_names, key, mnemo))
return NULL;
if (PyDict_SetItem(err_names_to_codes, mnemo, key))
return NULL;
Py_DECREF(key);
Py_DECREF(mnemo);
errcode++;
}
if (PyModule_AddObject(m, "err_codes_to_names", err_codes_to_names))
return NULL;
if (PyModule_AddObject(m, "err_names_to_codes", err_names_to_codes))
return NULL;
lib_codes_to_names = PyDict_New();
if (lib_codes_to_names == NULL)
return NULL;
libcode = library_codes;
while (libcode->library != NULL) {
PyObject *mnemo, *key;
key = PyLong_FromLong(libcode->code);
mnemo = PyUnicode_FromString(libcode->library);
if (key == NULL || mnemo == NULL)
return NULL;
if (PyDict_SetItem(lib_codes_to_names, key, mnemo))
return NULL;
Py_DECREF(key);
Py_DECREF(mnemo);
libcode++;
}
if (PyModule_AddObject(m, "lib_codes_to_names", lib_codes_to_names))
return NULL;
/* OpenSSL version */
/* SSLeay() gives us the version of the library linked against,
which could be different from the headers version.
*/
libver = SSLeay();
r = PyLong_FromUnsignedLong(libver);
if (r == NULL)
return NULL;
if (PyModule_AddObject(m, "OPENSSL_VERSION_NUMBER", r))
return NULL;
parse_openssl_version(libver, &major, &minor, &fix, &patch, &status);
r = Py_BuildValue("IIIII", major, minor, fix, patch, status);
if (r == NULL || PyModule_AddObject(m, "OPENSSL_VERSION_INFO", r))
return NULL;
r = PyUnicode_FromString(SSLeay_version(SSLEAY_VERSION));
if (r == NULL || PyModule_AddObject(m, "OPENSSL_VERSION", r))
return NULL;
libver = OPENSSL_VERSION_NUMBER;
parse_openssl_version(libver, &major, &minor, &fix, &patch, &status);
r = Py_BuildValue("IIIII", major, minor, fix, patch, status);
if (r == NULL || PyModule_AddObject(m, "_OPENSSL_API_VERSION", r))
return NULL;
return m;
}