https://github.com/root-project/root
Tip revision: 68645d438fe2883630fb10723dd5954d6d7955b7 authored by Gerardo Ganis on 01 April 2009, 07:45:10 UTC
Backport fixes for warnings and shadow variables following nightlies' reports
Backport fixes for warnings and shadow variables following nightlies' reports
Tip revision: 68645d4
rootauthrc.in
#
# etc/system.rootauthrc
#
# NB: this file contains system defaults read only in the case the
# $HOME/.rootauthrc is non-existing or non-readable. Its content
# can be included in the the private $HOME/.rootauthrc using the
# include directive (see below). The location of the private file
# can be changed by setting the environment variable ROOTAUTHRC
# to the appropriate absolute file pathname.
#
# This file contains information about authentication methods available for
# authentication vis-a-vis of a given host. It allows to define host specific
# methods and defaults for the info (username, certificates, ...) to be used.
# The information specified here superseeds the one found in .rootrc.
#
# Format:
# - lines starting with '#' are comment lines.
#
# - lines of the form 'include <file>' allow to include other files
# of this kind which are expanded exactly at the point where the
# 'include' appears; environment variables are supported, eg
# include $ROOTSYS/etc/system.rootauthrc
#
# - lines of the form:
#
# <host> [user <username>] <key> <info>
#
# where <host> is the host(s) identifier (see below), <key> is an
# option key and <info> is the relevant info whose format depends
# on <key>; 'user' indicates the username to whom the information
# applies; if absent, the info applies to all users.
#
# <host>:
# - hosts can specified either with their name (e.g. pcepsft43),
# their FQDN (e.g. pcepsft43.cern.ch) or their IP address
# (e.g. 137.138.99.73).
# - if <host>=default or <host>='*' the following <key> <info>
# applies to all hosts, unless host-specific entries are found.
# - the '*' character can be used in the any field of the name to
# indicate a set of machines or domains, e.g. pcepsft*.cern.ch
# applies to all 'pcepsft' machines in the domain 'cern.ch'
# (to indicate all 'lxplus' machines you should use 'lxplus*.cern.ch'
# because internally the generic lxplus machine has a real name of
# the form lxplusnnn.cern.ch; you can also use 'lxplus' if you
# don't care about domain name checking)
# - a whole domain can be indicated by its name, eg 'cern.ch',
# 'cnaf.infn.it' or '.ch'
# - truncated IP address can also be used to indicate a set of
# machines; they are interpreted as the very first or very last
# part of the address; for example, to select 137.138.99.73,
# any of these is valid: '137.138.99', '137.138', '137`, '99.73';
# or with wild cards: '137.13*' or '*.99.73`; however, '138.99'
# is invalid because ambigous.
# - host names can be followed by :rootd or :proofd to define directives
# applying only to the given service
#
# <key> <info>:
# - valid keys are 'list' and 'method';
# - if <key>=list, <info> contains the list of codes or short names for
# methods that can/should be tried for authentication wrt to <host>,
# in order of preference.
# Available methods are:
#
# Method short name code
#
# UsrPwd usrpwd 0
# SRP srp 1
# Kerberos krb5 2
# Globus globus 3
# SSH ssh 4
# UidGid uidgid 5 (insecure)
#
# Example of a valid 'list' line:
#
# default list 4
# lxplus*.cern.ch list ssh 3 krb5
#
# The first line defines as default method SSH, this is equivalent
# of setting:
#
# Rootd.Authentication 4
# Proofd.Authentication 4
#
# in the .rootc file.
#
# The second line adds Globus and Kerberos as available methods
# for authentication to the lxplus machines (in addition to SSH):
# SSH the preferred first, Kerberos the last option.
#
# Having a line 'list' for a host is non mandatory: methods can
# also be defined directly via 'method' lines (see below); in
# such a case the first 'method' line will define the preferred
# method and so on.
#
# - if <key>=method, <info> contains
# + a method code --> mandatory, must be in the valid range
# + a prompt flag --> optional, identified by the key 'pt:',
# e.g. pt:yes
# values: 'yes' or 1, 'no' or '0'
# + a reuse flag --> optional, identified by the key 'ru:',
# e.g. ru:no
# values: 'yes' or 1, 'no' or '0'
# + some relevant information for authentication (optional,
# see below)
#
# The 'prompt' flag defines whether the user should be prompted
# for the relevant authentication details each time an
# authentication with the corresponding method is attempted.
# Default is 'yes', superseeded by the related entry in '.rootrc' .
# The 'reuse' flag determines if a successful authentication will
# be later re-used without prompting (e.g. when the user tries
# to access the same host with same method during the same
# session: this allows to speed up operation in case of multiple
# access). Default is 'yes' for methods 0 (UsrPwd), 3 (Globus)
# and 4 (SSH), superseeded by the related entries in '.rootrc';
# feature not yet implemented for methods 1 (SRP) and 2 (Kerberos).
# No additional info is needed by method 5 (UidGid): this method
# sends to the remote host the (uid,gid) of the current process;
# 'reuse' will be af no advantage and 'prompt' is not allowed for
# security reasons. The format for the default info depends on
# the method:
#
# Method Format info
#
# UsrPwd us:<username> cp:<crypt_option>
# SRP us:<username>
# Kerberos pp:<principal> us:<username>(<principal>)
# Globus cd:<user_certkey_dir>
# cf:<usercert_file>
# kf:<userkey_file>
# ad:<authorities_dir>
# SSH us:<username>
# UidGid
#
#
# The key 'us' allows to specify a target username different from
# the local username (which is the default target username); the
# value specified via 'us' is superseeded by any user information
# passed through the constructor, e.g. <user> in TFTP("<user>@<host>").
#
# The additional keys for UsrPwd specify:
# 'cp' whether to encrypt the password with a public key (default)
# or not (slighty faster), values are 'yes' or '1' for YES,
# 'no' or '0' for NO (case sensitive);
#
#
# For Kerberos, the default principal is the one associated to
# the local user in the Kerberos realm. A different principal
# can be specified via the key 'pp', access to which must be granted
# remotely via .k5login . For backward compatibility, the principal
# can also be specified via the 'us' key (it must be in its full
# form <username>@<KERBEROS.REALM>, otherwise the string pointed by
# 'us' is interpreted as target username).
#
# The keys for Globus allow to specify only partial changes of
# the defaults:
# 'cd' defines the directory containing the user certificate
# and private key files;
# 'cf' defines the user certificate file
# 'kf' defines the user private key file
# 'ad' defines the directory containing credentials for
# recognized Certificate Authorities
# (the CA signing the remote host certificate must have
# an entry here)
# All these files and directories can be specified as absolute
# paths (starting with '/') or as relative to the getenv("HOME")
# directory (starting with '~/') or relative to the local '.globus'
# directory. Defaults are:
# cd:~/.globus
# cf:usercert.pem
# kf:userkey.pem
# ad:/etc/grid-security/certificates
#
# NB: for all the mentioned keys, there should be NO space between
# the key and the value, e.g. 'us: qwerty' will result in
# <username>=""
#
# Example of valid 'method' lines:
#
# default list 4 0 1
# default method ssh pt:yes us:qwerty
# default method 3 pt:0
# default user asdfgh method usrpwd pt:1 ru:no
# lxplus*.cern.ch method 3 pt:no ad:certificates
# pcepsft43.cern.ch user poiuyt method globus pt:no \
# cd:~/CA/HubCA/poiuyt ad:certificates
# include local/pceple19.rootauthrc
# include $ROOTSYS/etc/system.rootauthrc
# localhost:proofd list uidgid
# pcepsft43.cern.ch user asdfgh method 2 pt:no pp:asdkrb@LOC.KRB.REALM
#
# The first line states that, unless differently specified,
# the first method to be tried for autentication is SSH,
# followed in case of failure by UsrPwd and SRP.
# The second line specifies that when a SSH authentication is
# attempted, the user will be prompted for the remote username,
# with 'qwerty' as default. The third line states that for
# Globus the user will not be prompted and the credentials
# and related files will be looked for in the default places.
# The fourth line specifies that, for UsrPwd authentication, user
# 'asdfgh' will get a prompt with default username 'asdfgh' and
# that a successful authentication will not be reused
# The fifth line tells that for Globus to lxplus, the user
# will still not be prompted, but the credentials for the
# CA signing the remote certificate will be looked
# for in ~/.globus/certificates.
# The sixth line tells that for Globus authentication on
# pcepsft43 of user poiuyt, the usercert.pem and userkey.pem
# files are looked for in directory ~/CA/HubCA/poiuyt,
# and the credentials for the CA signing the remote certificate
# in ~/.globus/certificates.
# The seventh directive includes the content of the file
# pceple19.rootauthrc located in the subdirectory local of the
# directory where the intercative root session was started.
# The eight directive includes the content of the system
# defaults.
# The ninth line states that when accessing slaves on the local
# host, the uidgid method should be used.
# The tenth line states that the krb5 method should be used for
# accessing account 'asdfgh' at pcepsft43.cern.ch, with kerberos
# credentials for principal adskrb@LOC.KRB.REALM .
#
# - Finally, also supported are lines of the form:
#
# proofserv <host1>[:<user1>][:<method1>[:...[:<methodn>]]] \
# <host2>[:<user2>][:<method1>[:...[:<methodn>]]] \
# ... <hostn>[:<usern>][:<method1>[:...[:<methodn>]]]
#
# which are active only for PROOF sessions and specify the list of hosts
# for which the authentication info should be transmitted to the slaves
# of the PROOF cluster; these directives are useful, for example, in
# the case of data servers external to the PROOF cluster that you may
# want to access via a given 'user' and a given authentication 'method';
# 'user' and 'method' are not mandatory; for each <host> (an user, method)
# specified with 'proofserv' all the information that can be collected
# from the rest of the .rootauthrc file is sent to slaves via the master
#
#
default list usrpwd ssh @havesrp@ @havekrb5@ @haveglobus@ uidgid