https://github.com/torvalds/linux
Tip revision: ce9ecca0238b140b88f43859b211c9fdfd8e5b70 authored by Linus Torvalds on 17 September 2023, 21:40:24 UTC
Linux 6.6-rc2
Linux 6.6-rc2
Tip revision: ce9ecca
devtree.c
// SPDX-License-Identifier: GPL-2.0-only
/*
* linux/arch/arm/kernel/devtree.c
*
* Copyright (C) 2009 Canonical Ltd. <jeremy.kerr@canonical.com>
*/
#include <linux/init.h>
#include <linux/export.h>
#include <linux/errno.h>
#include <linux/types.h>
#include <linux/memblock.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/smp.h>
#include <asm/cputype.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/prom.h>
#include <asm/smp_plat.h>
#include <asm/mach/arch.h>
#include <asm/mach-types.h>
#ifdef CONFIG_SMP
extern struct of_cpu_method __cpu_method_of_table[];
static const struct of_cpu_method __cpu_method_of_table_sentinel
__used __section("__cpu_method_of_table_end");
static int __init set_smp_ops_by_method(struct device_node *node)
{
const char *method;
struct of_cpu_method *m = __cpu_method_of_table;
if (of_property_read_string(node, "enable-method", &method))
return 0;
for (; m->method; m++)
if (!strcmp(m->method, method)) {
smp_set_ops(m->ops);
return 1;
}
return 0;
}
#else
static inline int set_smp_ops_by_method(struct device_node *node)
{
return 1;
}
#endif
/*
* arm_dt_init_cpu_maps - Function retrieves cpu nodes from the device tree
* and builds the cpu logical map array containing MPIDR values related to
* logical cpus
*
* Updates the cpu possible mask with the number of parsed cpu nodes
*/
void __init arm_dt_init_cpu_maps(void)
{
/*
* Temp logical map is initialized with UINT_MAX values that are
* considered invalid logical map entries since the logical map must
* contain a list of MPIDR[23:0] values where MPIDR[31:24] must
* read as 0.
*/
struct device_node *cpu, *cpus;
int found_method = 0;
u32 i, j, cpuidx = 1;
u32 mpidr = is_smp() ? read_cpuid_mpidr() & MPIDR_HWID_BITMASK : 0;
u32 tmp_map[NR_CPUS] = { [0 ... NR_CPUS-1] = MPIDR_INVALID };
bool bootcpu_valid = false;
cpus = of_find_node_by_path("/cpus");
if (!cpus)
return;
for_each_of_cpu_node(cpu) {
u32 hwid = of_get_cpu_hwid(cpu, 0);
pr_debug(" * %pOF...\n", cpu);
/*
* Bits n:24 must be set to 0 in the DT since the reg property
* defines the MPIDR[23:0].
*/
if (hwid & ~MPIDR_HWID_BITMASK) {
of_node_put(cpu);
return;
}
/*
* Duplicate MPIDRs are a recipe for disaster.
* Scan all initialized entries and check for
* duplicates. If any is found just bail out.
* temp values were initialized to UINT_MAX
* to avoid matching valid MPIDR[23:0] values.
*/
for (j = 0; j < cpuidx; j++)
if (WARN(tmp_map[j] == hwid,
"Duplicate /cpu reg properties in the DT\n")) {
of_node_put(cpu);
return;
}
/*
* Build a stashed array of MPIDR values. Numbering scheme
* requires that if detected the boot CPU must be assigned
* logical id 0. Other CPUs get sequential indexes starting
* from 1. If a CPU node with a reg property matching the
* boot CPU MPIDR is detected, this is recorded so that the
* logical map built from DT is validated and can be used
* to override the map created in smp_setup_processor_id().
*/
if (hwid == mpidr) {
i = 0;
bootcpu_valid = true;
} else {
i = cpuidx++;
}
if (WARN(cpuidx > nr_cpu_ids, "DT /cpu %u nodes greater than "
"max cores %u, capping them\n",
cpuidx, nr_cpu_ids)) {
cpuidx = nr_cpu_ids;
of_node_put(cpu);
break;
}
tmp_map[i] = hwid;
if (!found_method)
found_method = set_smp_ops_by_method(cpu);
}
/*
* Fallback to an enable-method in the cpus node if nothing found in
* a cpu node.
*/
if (!found_method)
set_smp_ops_by_method(cpus);
if (!bootcpu_valid) {
pr_warn("DT missing boot CPU MPIDR[23:0], fall back to default cpu_logical_map\n");
return;
}
/*
* Since the boot CPU node contains proper data, and all nodes have
* a reg property, the DT CPU list can be considered valid and the
* logical map created in smp_setup_processor_id() can be overridden
*/
for (i = 0; i < cpuidx; i++) {
set_cpu_possible(i, true);
cpu_logical_map(i) = tmp_map[i];
pr_debug("cpu logical map 0x%x\n", cpu_logical_map(i));
}
}
bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
{
return phys_id == cpu_logical_map(cpu);
}
static const void * __init arch_get_next_mach(const char *const **match)
{
static const struct machine_desc *mdesc = __arch_info_begin;
const struct machine_desc *m = mdesc;
if (m >= __arch_info_end)
return NULL;
mdesc++;
*match = m->dt_compat;
return m;
}
/**
* setup_machine_fdt - Machine setup when an dtb was passed to the kernel
* @dt_virt: virtual address of dt blob
*
* If a dtb was passed to the kernel in r2, then use it to choose the
* correct machine_desc and to setup the system.
*/
const struct machine_desc * __init setup_machine_fdt(void *dt_virt)
{
const struct machine_desc *mdesc, *mdesc_best = NULL;
DT_MACHINE_START(GENERIC_DT, "Generic DT based system")
.l2c_aux_val = 0x0,
.l2c_aux_mask = ~0x0,
MACHINE_END
mdesc_best = &__mach_desc_GENERIC_DT;
if (!dt_virt || !early_init_dt_verify(dt_virt))
return NULL;
mdesc = of_flat_dt_match_machine(mdesc_best, arch_get_next_mach);
if (!mdesc) {
const char *prop;
int size;
unsigned long dt_root;
early_print("\nError: unrecognized/unsupported "
"device tree compatible list:\n[ ");
dt_root = of_get_flat_dt_root();
prop = of_get_flat_dt_prop(dt_root, "compatible", &size);
while (size > 0) {
early_print("'%s' ", prop);
size -= strlen(prop) + 1;
prop += strlen(prop) + 1;
}
early_print("]\n\n");
dump_machine_table(); /* does not return */
}
/* We really don't want to do this, but sometimes firmware provides buggy data */
if (mdesc->dt_fixup)
mdesc->dt_fixup();
early_init_dt_scan_nodes();
/* Change machine number to match the mdesc we're using */
__machine_arch_type = mdesc->nr;
return mdesc;
}