https://github.com/torvalds/linux
Tip revision: f22e6e847115abc3a0e2ad7bb18d243d42275af1 authored by Linus Torvalds on 06 April 2015, 22:39:45 UTC
Linux 4.0-rc7
Linux 4.0-rc7
Tip revision: f22e6e8
sleep.S
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Exynos low-level resume code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
#include "smc.h"
#define CPU_MASK 0xff0ffff0
#define CPU_CORTEX_A9 0x410fc090
/*
* The following code is located into the .data section. This is to
* allow l2x0_regs_phys to be accessed with a relative load while we
* can't rely on any MMU translation. We could have put l2x0_regs_phys
* in the .text section as well, but some setups might insist on it to
* be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
*/
.data
.align
/*
* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* exynos_cpu_resume entry.
*/
.word 0x2bedf00d
/*
* exynos_cpu_resume
*
* resume code entry for bootloader to call
*/
ENTRY(exynos_cpu_resume)
#ifdef CONFIG_CACHE_L2X0
mrc p15, 0, r0, c0, c0, 0
ldr r1, =CPU_MASK
and r0, r0, r1
ldr r1, =CPU_CORTEX_A9
cmp r0, r1
bleq l2c310_early_resume
#endif
b cpu_resume
ENDPROC(exynos_cpu_resume)
.align
ENTRY(exynos_cpu_resume_ns)
mrc p15, 0, r0, c0, c0, 0
ldr r1, =CPU_MASK
and r0, r0, r1
ldr r1, =CPU_CORTEX_A9
cmp r0, r1
bne skip_cp15
adr r0, cp15_save_power
ldr r1, [r0]
adr r0, cp15_save_diag
ldr r2, [r0]
mov r0, #SMC_CMD_C15RESUME
dsb
smc #0
#ifdef CONFIG_CACHE_L2X0
adr r0, 1f
ldr r2, [r0]
add r0, r2, r0
/* Check that the address has been initialised. */
ldr r1, [r0, #L2X0_R_PHY_BASE]
teq r1, #0
beq skip_l2x0
/* Check if controller has been enabled. */
ldr r2, [r1, #L2X0_CTRL]
tst r2, #0x1
bne skip_l2x0
ldr r1, [r0, #L2X0_R_TAG_LATENCY]
ldr r2, [r0, #L2X0_R_DATA_LATENCY]
ldr r3, [r0, #L2X0_R_PREFETCH_CTRL]
mov r0, #SMC_CMD_L2X0SETUP1
smc #0
/* Reload saved regs pointer because smc corrupts registers. */
adr r0, 1f
ldr r2, [r0]
add r0, r2, r0
ldr r1, [r0, #L2X0_R_PWR_CTRL]
ldr r2, [r0, #L2X0_R_AUX_CTRL]
mov r0, #SMC_CMD_L2X0SETUP2
smc #0
mov r0, #SMC_CMD_L2X0INVALL
smc #0
mov r1, #1
mov r0, #SMC_CMD_L2X0CTRL
smc #0
skip_l2x0:
#endif /* CONFIG_CACHE_L2X0 */
skip_cp15:
b cpu_resume
ENDPROC(exynos_cpu_resume_ns)
.globl cp15_save_diag
cp15_save_diag:
.long 0 @ cp15 diagnostic
.globl cp15_save_power
cp15_save_power:
.long 0 @ cp15 power control
#ifdef CONFIG_CACHE_L2X0
.align
1: .long l2x0_saved_regs - .
#endif /* CONFIG_CACHE_L2X0 */