https://github.com/torvalds/linux
Tip revision: 28a33cbc24e4256c143dce96c7d93bf423229f92 authored by Linus Torvalds on 21 July 2012, 20:58:29 UTC
Linux 3.5
Linux 3.5
Tip revision: 28a33cb
pci.c
/*
* linux/arch/arm/mach-integrator/pci-integrator.c
*
* Copyright (C) 1999 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*
* PCI functions for Integrator
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include <mach/irqs.h>
/*
* A small note about bridges and interrupts. The DECchip 21050 (and
* later) adheres to the PCI-PCI bridge specification. This says that
* the interrupts on the other side of a bridge are swizzled in the
* following manner:
*
* Dev Interrupt Interrupt
* Pin on Pin on
* Device Connector
*
* 4 A A
* B B
* C C
* D D
*
* 5 A B
* B C
* C D
* D A
*
* 6 A C
* B D
* C A
* D B
*
* 7 A D
* B A
* C B
* D C
*
* Where A = pin 1, B = pin 2 and so on and pin=0 = default = A.
* Thus, each swizzle is ((pin-1) + (device#-4)) % 4
*/
/*
* This routine handles multiple bridges.
*/
static u8 __init integrator_swizzle(struct pci_dev *dev, u8 *pinp)
{
if (*pinp == 0)
*pinp = 1;
return pci_common_swizzle(dev, pinp);
}
static int irq_tab[4] __initdata = {
IRQ_AP_PCIINT0, IRQ_AP_PCIINT1, IRQ_AP_PCIINT2, IRQ_AP_PCIINT3
};
/*
* map the specified device/slot/pin to an IRQ. This works out such
* that slot 9 pin 1 is INT0, pin 2 is INT1, and slot 10 pin 1 is INT1.
*/
static int __init integrator_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
{
int intnr = ((slot - 9) + (pin - 1)) & 3;
return irq_tab[intnr];
}
extern void pci_v3_init(void *);
static struct hw_pci integrator_pci __initdata = {
.swizzle = integrator_swizzle,
.map_irq = integrator_map_irq,
.setup = pci_v3_setup,
.nr_controllers = 1,
.ops = &pci_v3_ops,
.preinit = pci_v3_preinit,
.postinit = pci_v3_postinit,
};
static int __init integrator_pci_init(void)
{
if (machine_is_integrator())
pci_common_init(&integrator_pci);
return 0;
}
subsys_initcall(integrator_pci_init);