https://github.com/torvalds/linux
Tip revision: 7dcca30a32aadb0520417521b0c44f42d09fe05c authored by Linus Torvalds on 08 July 2007, 23:32:17 UTC
Linux 2.6.22
Linux 2.6.22
Tip revision: 7dcca30
corgi.c
/*
* Support for Sharp SL-C7xx PDAs
* Models: SL-C700 (Corgi), SL-C750 (Shepherd), SL-C760 (Husky)
*
* Copyright (c) 2004-2005 Richard Purdie
*
* Based on Sharp's 2.4 kernel patches/lubbock.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/major.h>
#include <linux/fs.h>
#include <linux/interrupt.h>
#include <linux/mmc/host.h>
#include <linux/pm.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/irda.h>
#include <asm/arch/mmc.h>
#include <asm/arch/udc.h>
#include <asm/arch/corgi.h>
#include <asm/arch/sharpsl.h>
#include <asm/mach/sharpsl_param.h>
#include <asm/hardware/scoop.h>
#include "generic.h"
#include "sharpsl.h"
/*
* Corgi SCOOP Device
*/
static struct resource corgi_scoop_resources[] = {
[0] = {
.start = 0x10800000,
.end = 0x10800fff,
.flags = IORESOURCE_MEM,
},
};
static struct scoop_config corgi_scoop_setup = {
.io_dir = CORGI_SCOOP_IO_DIR,
.io_out = CORGI_SCOOP_IO_OUT,
};
struct platform_device corgiscoop_device = {
.name = "sharp-scoop",
.id = -1,
.dev = {
.platform_data = &corgi_scoop_setup,
},
.num_resources = ARRAY_SIZE(corgi_scoop_resources),
.resource = corgi_scoop_resources,
};
static void corgi_pcmcia_init(void)
{
/* Setup default state of GPIO outputs
before we enable them as outputs. */
GPSR(GPIO48_nPOE) = GPIO_bit(GPIO48_nPOE) |
GPIO_bit(GPIO49_nPWE) | GPIO_bit(GPIO50_nPIOR) |
GPIO_bit(GPIO51_nPIOW) | GPIO_bit(GPIO52_nPCE_1) |
GPIO_bit(GPIO53_nPCE_2);
pxa_gpio_mode(GPIO48_nPOE_MD);
pxa_gpio_mode(GPIO49_nPWE_MD);
pxa_gpio_mode(GPIO50_nPIOR_MD);
pxa_gpio_mode(GPIO51_nPIOW_MD);
pxa_gpio_mode(GPIO55_nPREG_MD);
pxa_gpio_mode(GPIO56_nPWAIT_MD);
pxa_gpio_mode(GPIO57_nIOIS16_MD);
pxa_gpio_mode(GPIO52_nPCE_1_MD);
pxa_gpio_mode(GPIO53_nPCE_2_MD);
pxa_gpio_mode(GPIO54_pSKTSEL_MD);
}
static struct scoop_pcmcia_dev corgi_pcmcia_scoop[] = {
{
.dev = &corgiscoop_device.dev,
.irq = CORGI_IRQ_GPIO_CF_IRQ,
.cd_irq = CORGI_IRQ_GPIO_CF_CD,
.cd_irq_str = "PCMCIA0 CD",
},
};
static struct scoop_pcmcia_config corgi_pcmcia_config = {
.devs = &corgi_pcmcia_scoop[0],
.num_devs = 1,
.pcmcia_init = corgi_pcmcia_init,
};
EXPORT_SYMBOL(corgiscoop_device);
/*
* Corgi SSP Device
*
* Set the parent as the scoop device because a lot of SSP devices
* also use scoop functions and this makes the power up/down order
* work correctly.
*/
struct platform_device corgissp_device = {
.name = "corgi-ssp",
.dev = {
.parent = &corgiscoop_device.dev,
},
.id = -1,
};
struct corgissp_machinfo corgi_ssp_machinfo = {
.port = 1,
.cs_lcdcon = CORGI_GPIO_LCDCON_CS,
.cs_ads7846 = CORGI_GPIO_ADS7846_CS,
.cs_max1111 = CORGI_GPIO_MAX1111_CS,
.clk_lcdcon = 76,
.clk_ads7846 = 2,
.clk_max1111 = 8,
};
/*
* Corgi Backlight Device
*/
static struct corgibl_machinfo corgi_bl_machinfo = {
.max_intensity = 0x2f,
.default_intensity = 0x1f,
.limit_mask = 0x0b,
.set_bl_intensity = corgi_bl_set_intensity,
};
static struct platform_device corgibl_device = {
.name = "corgi-bl",
.dev = {
.parent = &corgifb_device.dev,
.platform_data = &corgi_bl_machinfo,
},
.id = -1,
};
/*
* Corgi Keyboard Device
*/
static struct platform_device corgikbd_device = {
.name = "corgi-keyboard",
.id = -1,
};
/*
* Corgi LEDs
*/
static struct platform_device corgiled_device = {
.name = "corgi-led",
.id = -1,
};
/*
* Corgi Touch Screen Device
*/
static struct resource corgits_resources[] = {
[0] = {
.start = CORGI_IRQ_GPIO_TP_INT,
.end = CORGI_IRQ_GPIO_TP_INT,
.flags = IORESOURCE_IRQ,
},
};
static struct corgits_machinfo corgi_ts_machinfo = {
.get_hsync_len = corgi_get_hsync_len,
.put_hsync = corgi_put_hsync,
.wait_hsync = corgi_wait_hsync,
};
static struct platform_device corgits_device = {
.name = "corgi-ts",
.dev = {
.parent = &corgissp_device.dev,
.platform_data = &corgi_ts_machinfo,
},
.id = -1,
.num_resources = ARRAY_SIZE(corgits_resources),
.resource = corgits_resources,
};
/*
* MMC/SD Device
*
* The card detect interrupt isn't debounced so we delay it by 250ms
* to give the card a chance to fully insert/eject.
*/
static struct pxamci_platform_data corgi_mci_platform_data;
static int corgi_mci_init(struct device *dev, irq_handler_t corgi_detect_int, void *data)
{
int err;
/* setup GPIO for PXA25x MMC controller */
pxa_gpio_mode(GPIO6_MMCCLK_MD);
pxa_gpio_mode(GPIO8_MMCCS0_MD);
pxa_gpio_mode(CORGI_GPIO_nSD_DETECT | GPIO_IN);
pxa_gpio_mode(CORGI_GPIO_SD_PWR | GPIO_OUT);
corgi_mci_platform_data.detect_delay = msecs_to_jiffies(250);
err = request_irq(CORGI_IRQ_GPIO_nSD_DETECT, corgi_detect_int,
IRQF_DISABLED | IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"MMC card detect", data);
if (err) {
printk(KERN_ERR "corgi_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return -1;
}
return 0;
}
static void corgi_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask)
GPSR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
else
GPCR1 = GPIO_bit(CORGI_GPIO_SD_PWR);
}
static int corgi_mci_get_ro(struct device *dev)
{
return GPLR(CORGI_GPIO_nSD_WP) & GPIO_bit(CORGI_GPIO_nSD_WP);
}
static void corgi_mci_exit(struct device *dev, void *data)
{
free_irq(CORGI_IRQ_GPIO_nSD_DETECT, data);
}
static struct pxamci_platform_data corgi_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = corgi_mci_init,
.get_ro = corgi_mci_get_ro,
.setpower = corgi_mci_setpower,
.exit = corgi_mci_exit,
};
/*
* Irda
*/
static void corgi_irda_transceiver_mode(struct device *dev, int mode)
{
if (mode & IR_OFF)
GPSR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
else
GPCR(CORGI_GPIO_IR_ON) = GPIO_bit(CORGI_GPIO_IR_ON);
}
static struct pxaficp_platform_data corgi_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_OFF,
.transceiver_mode = corgi_irda_transceiver_mode,
};
/*
* USB Device Controller
*/
static struct pxa2xx_udc_mach_info udc_info __initdata = {
/* no connect GPIO; corgi can't tell connection status */
.gpio_pullup = CORGI_GPIO_USB_PULLUP,
};
static struct platform_device *devices[] __initdata = {
&corgiscoop_device,
&corgissp_device,
&corgifb_device,
&corgikbd_device,
&corgibl_device,
&corgits_device,
&corgiled_device,
};
static void corgi_poweroff(void)
{
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
if (!machine_is_corgi())
/* Green LED off tells the bootloader to halt */
reset_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
arm_machine_restart('h');
}
static void corgi_restart(char mode)
{
RCSR = RCSR_HWR | RCSR_WDR | RCSR_SMR | RCSR_GPR;
if (!machine_is_corgi())
/* Green LED on tells the bootloader to reboot */
set_scoop_gpio(&corgiscoop_device.dev, CORGI_SCP_LED_GREEN);
arm_machine_restart('h');
}
static void __init corgi_init(void)
{
pm_power_off = corgi_poweroff;
arm_pm_restart = corgi_restart;
/* setup sleep mode values */
PWER = 0x00000002;
PFER = 0x00000000;
PRER = 0x00000002;
PGSR0 = 0x0158C000;
PGSR1 = 0x00FF0080;
PGSR2 = 0x0001C004;
/* Stop 3.6MHz and drive HIGH to PCMCIA and CS */
PCFR |= PCFR_OPDE;
corgi_ssp_set_machinfo(&corgi_ssp_machinfo);
pxa_gpio_mode(CORGI_GPIO_IR_ON | GPIO_OUT);
pxa_gpio_mode(CORGI_GPIO_HSYNC | GPIO_IN);
pxa_set_udc_info(&udc_info);
pxa_set_mci_info(&corgi_mci_platform_data);
pxa_set_ficp_info(&corgi_ficp_platform_data);
platform_scoop_config = &corgi_pcmcia_config;
platform_add_devices(devices, ARRAY_SIZE(devices));
}
static void __init fixup_corgi(struct machine_desc *desc,
struct tag *tags, char **cmdline, struct meminfo *mi)
{
sharpsl_save_param();
mi->nr_banks=1;
mi->bank[0].start = 0xa0000000;
mi->bank[0].node = 0;
if (machine_is_corgi())
mi->bank[0].size = (32*1024*1024);
else
mi->bank[0].size = (64*1024*1024);
}
#ifdef CONFIG_MACH_CORGI
MACHINE_START(CORGI, "SHARP Corgi")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
.init_irq = pxa_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_SHEPHERD
MACHINE_START(SHEPHERD, "SHARP Shepherd")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
.init_irq = pxa_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif
#ifdef CONFIG_MACH_HUSKY
MACHINE_START(HUSKY, "SHARP Husky")
.phys_io = 0x40000000,
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.fixup = fixup_corgi,
.map_io = pxa_map_io,
.init_irq = pxa_init_irq,
.init_machine = corgi_init,
.timer = &pxa_timer,
MACHINE_END
#endif