https://github.com/torvalds/linux
Tip revision: de46c33745f5e2ad594c72f2cf5f490861b16ce1 authored by Linus Torvalds on 26 April 2007, 03:08:32 UTC
Linux 2.6.21
Linux 2.6.21
Tip revision: de46c33
irq.c
/*
* linux/arch/arm/mach-pxa/irq.c
*
* Generic PXA IRQ handling, GPIO IRQ demultiplexing, etc.
*
* Author: Nicolas Pitre
* Created: Jun 15, 2001
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/ptrace.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/mach/irq.h>
#include <asm/arch/pxa-regs.h>
#include "generic.h"
/*
* This is for peripheral IRQs internal to the PXA chip.
*/
static void pxa_mask_low_irq(unsigned int irq)
{
ICMR &= ~(1 << (irq + PXA_IRQ_SKIP));
}
static void pxa_unmask_low_irq(unsigned int irq)
{
ICMR |= (1 << (irq + PXA_IRQ_SKIP));
}
static struct irq_chip pxa_internal_chip_low = {
.name = "SC",
.ack = pxa_mask_low_irq,
.mask = pxa_mask_low_irq,
.unmask = pxa_unmask_low_irq,
};
#if PXA_INTERNAL_IRQS > 32
/*
* This is for the second set of internal IRQs as found on the PXA27x.
*/
static void pxa_mask_high_irq(unsigned int irq)
{
ICMR2 &= ~(1 << (irq - 32 + PXA_IRQ_SKIP));
}
static void pxa_unmask_high_irq(unsigned int irq)
{
ICMR2 |= (1 << (irq - 32 + PXA_IRQ_SKIP));
}
static struct irq_chip pxa_internal_chip_high = {
.name = "SC-hi",
.ack = pxa_mask_high_irq,
.mask = pxa_mask_high_irq,
.unmask = pxa_unmask_high_irq,
};
#endif
/*
* PXA GPIO edge detection for IRQs:
* IRQs are generated on Falling-Edge, Rising-Edge, or both.
* Use this instead of directly setting GRER/GFER.
*/
static long GPIO_IRQ_rising_edge[4];
static long GPIO_IRQ_falling_edge[4];
static long GPIO_IRQ_mask[4];
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
int gpio, idx;
gpio = IRQ_TO_GPIO(irq);
idx = gpio >> 5;
if (type == IRQT_PROBE) {
/* Don't mess with enabled GPIOs using preconfigured edges or
GPIOs set to alternate function or to output during probe */
if ((GPIO_IRQ_rising_edge[idx] | GPIO_IRQ_falling_edge[idx] | GPDR(gpio)) &
GPIO_bit(gpio))
return 0;
if (GAFR(gpio) & (0x3 << (((gpio) & 0xf)*2)))
return 0;
type = __IRQT_RISEDGE | __IRQT_FALEDGE;
}
/* printk(KERN_DEBUG "IRQ%d (GPIO%d): ", irq, gpio); */
pxa_gpio_mode(gpio | GPIO_IN);
if (type & __IRQT_RISEDGE) {
/* printk("rising "); */
__set_bit (gpio, GPIO_IRQ_rising_edge);
} else
__clear_bit (gpio, GPIO_IRQ_rising_edge);
if (type & __IRQT_FALEDGE) {
/* printk("falling "); */
__set_bit (gpio, GPIO_IRQ_falling_edge);
} else
__clear_bit (gpio, GPIO_IRQ_falling_edge);
/* printk("edges\n"); */
GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
return 0;
}
/*
* GPIO IRQs must be acknowledged. This is for GPIO 0 and 1.
*/
static void pxa_ack_low_gpio(unsigned int irq)
{
GEDR0 = (1 << (irq - IRQ_GPIO0));
}
static struct irq_chip pxa_low_gpio_chip = {
.name = "GPIO-l",
.ack = pxa_ack_low_gpio,
.mask = pxa_mask_low_irq,
.unmask = pxa_unmask_low_irq,
.set_type = pxa_gpio_irq_type,
};
/*
* Demux handler for GPIO>=2 edge detect interrupts
*/
static void pxa_gpio_demux_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned int mask;
int loop;
do {
loop = 0;
mask = GEDR0 & ~3;
if (mask) {
GEDR0 = mask;
irq = IRQ_GPIO(2);
desc = irq_desc + irq;
mask >>= 2;
do {
if (mask & 1)
desc_handle_irq(irq, desc);
irq++;
desc++;
mask >>= 1;
} while (mask);
loop = 1;
}
mask = GEDR1;
if (mask) {
GEDR1 = mask;
irq = IRQ_GPIO(32);
desc = irq_desc + irq;
do {
if (mask & 1)
desc_handle_irq(irq, desc);
irq++;
desc++;
mask >>= 1;
} while (mask);
loop = 1;
}
mask = GEDR2;
if (mask) {
GEDR2 = mask;
irq = IRQ_GPIO(64);
desc = irq_desc + irq;
do {
if (mask & 1)
desc_handle_irq(irq, desc);
irq++;
desc++;
mask >>= 1;
} while (mask);
loop = 1;
}
#if PXA_LAST_GPIO >= 96
mask = GEDR3;
if (mask) {
GEDR3 = mask;
irq = IRQ_GPIO(96);
desc = irq_desc + irq;
do {
if (mask & 1)
desc_handle_irq(irq, desc);
irq++;
desc++;
mask >>= 1;
} while (mask);
loop = 1;
}
#endif
} while (loop);
}
static void pxa_ack_muxed_gpio(unsigned int irq)
{
int gpio = irq - IRQ_GPIO(2) + 2;
GEDR(gpio) = GPIO_bit(gpio);
}
static void pxa_mask_muxed_gpio(unsigned int irq)
{
int gpio = irq - IRQ_GPIO(2) + 2;
__clear_bit(gpio, GPIO_IRQ_mask);
GRER(gpio) &= ~GPIO_bit(gpio);
GFER(gpio) &= ~GPIO_bit(gpio);
}
static void pxa_unmask_muxed_gpio(unsigned int irq)
{
int gpio = irq - IRQ_GPIO(2) + 2;
int idx = gpio >> 5;
__set_bit(gpio, GPIO_IRQ_mask);
GRER(gpio) = GPIO_IRQ_rising_edge[idx] & GPIO_IRQ_mask[idx];
GFER(gpio) = GPIO_IRQ_falling_edge[idx] & GPIO_IRQ_mask[idx];
}
static struct irq_chip pxa_muxed_gpio_chip = {
.name = "GPIO",
.ack = pxa_ack_muxed_gpio,
.mask = pxa_mask_muxed_gpio,
.unmask = pxa_unmask_muxed_gpio,
.set_type = pxa_gpio_irq_type,
};
void __init pxa_init_irq(void)
{
int irq;
/* disable all IRQs */
ICMR = 0;
/* all IRQs are IRQ, not FIQ */
ICLR = 0;
/* clear all GPIO edge detects */
GFER0 = 0;
GFER1 = 0;
GFER2 = 0;
GRER0 = 0;
GRER1 = 0;
GRER2 = 0;
GEDR0 = GEDR0;
GEDR1 = GEDR1;
GEDR2 = GEDR2;
#ifdef CONFIG_PXA27x
/* And similarly for the extra regs on the PXA27x */
ICMR2 = 0;
ICLR2 = 0;
GFER3 = 0;
GRER3 = 0;
GEDR3 = GEDR3;
#endif
/* only unmasked interrupts kick us out of idle */
ICCR = 1;
/* GPIO 0 and 1 must have their mask bit always set */
GPIO_IRQ_mask[0] = 3;
for (irq = PXA_IRQ(PXA_IRQ_SKIP); irq <= PXA_IRQ(31); irq++) {
set_irq_chip(irq, &pxa_internal_chip_low);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
#if PXA_INTERNAL_IRQS > 32
for (irq = PXA_IRQ(32); irq < PXA_IRQ(PXA_INTERNAL_IRQS); irq++) {
set_irq_chip(irq, &pxa_internal_chip_high);
set_irq_handler(irq, handle_level_irq);
set_irq_flags(irq, IRQF_VALID);
}
#endif
for (irq = IRQ_GPIO0; irq <= IRQ_GPIO1; irq++) {
set_irq_chip(irq, &pxa_low_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
for (irq = IRQ_GPIO(2); irq <= IRQ_GPIO(PXA_LAST_GPIO); irq++) {
set_irq_chip(irq, &pxa_muxed_gpio_chip);
set_irq_handler(irq, handle_edge_irq);
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
/* Install handler for GPIO>=2 edge detect interrupts */
set_irq_chip(IRQ_GPIO_2_x, &pxa_internal_chip_low);
set_irq_chained_handler(IRQ_GPIO_2_x, pxa_gpio_demux_handler);
}